[fix] ADS8691 & ADGS1412 & MAX5136 use same spi mode

simplelink/ble_sdk_2_02_02_25/src/boards/BOOSTXL_CC2650MA/BOOSTXL_CC2650MA.h

@@ -50,7 +50,7 @@ extern "C" {
  *  ==========================================================================*/
 #include <ti/drivers/PIN.h>
 #include <driverlib/ioc.h>
-#include "boards_config/elite_boards_select.h"
+#include "app_config.h"
 
 /** ============================================================================
  *  Externs
@@ -146,12 +146,6 @@ extern const PIN_Config BoardGpioInitTable[];
 #define Board_UART_TX                  Board_BP_UART_Rx          /* RXD */
 #define Board_UART_RX                  Board_BP_UART_Tx          /* TXD */
 
-// /* SPI Board */
-// #define Board_SPI0_MISO                Board_BP_SPI_MISO
-// #define Board_SPI0_MOSI                Board_BP_SPI_MOSI
-// #define Board_SPI0_CLK                 Board_BP_SPI_CLK
-// #define Board_SPI0_CS                  Board_BP_SPI_CS_Wireless
-
 /* Power Management Board */
 #define Board_SRDY                     Board_BP_Pin_J2_19
 #define Board_MRDY                     Board_BP_Pin_J1_2
@@ -166,6 +160,28 @@ extern const PIN_Config BoardGpioInitTable[];
 #define Board_PWMPIN6                  PIN_UNASSIGNED
 #define Board_PWMPIN7                  PIN_UNASSIGNED
 
+/* SPI & I2C Board */
+#ifndef DEF_ELITE_MODEL
+#define Board_SPI0_MISO                Board_BP_SPI_MISO
+#define Board_SPI0_MOSI                Board_BP_SPI_MOSI
+#define Board_SPI0_CLK                 Board_BP_SPI_CLK
+#define Board_SPI0_CS                  Board_BP_SPI_CS_Wireless
+#error "DEF_ELITE_MODEL not defined"
+#else
+#define Board_SPI0_MISO                E_SPI0_MISO
+#define Board_SPI0_MOSI                E_SPI0_MOSI
+#define Board_SPI0_CLK                 E_SPI0_CLK
+#define Board_SPI0_CS                  E_SPI0_CS
+
+#define Board_SPI1_MISO                E_SPI1_MISO
+#define Board_SPI1_MOSI                E_SPI1_MOSI
+#define Board_SPI1_CLK                 E_SPI1_CLK
+#define Board_SPI1_CS                  E_SPI1_CS
+
+#define Board_I2C0_SCL0                E_I2C0_SCL0 
+#define Board_I2C0_SDA0                E_I2C0_SDA0
+#endif
+
 /** ============================================================================
  *  Instance identifiers
  *  ==========================================================================*/

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/HAL/ADG1408x1.h

@@ -0,0 +1,147 @@
+#include <stdint.h>
+#include "app_config.h"
+
+#if(!CC2650_CODE)
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+#endif
+
+#define ADG1408_S1  0
+#define ADG1408_S2  1
+#define ADG1408_S3  2
+#define ADG1408_S4  3
+#define ADG1408_S5  4
+#define ADG1408_S6  5
+#define ADG1408_S7  6
+#define ADG1408_S8  7
+
+struct ADG1408_pin_t {
+  bool A0;
+  bool A1;
+  bool A2;
+};
+
+extern void set_pin_ADCA0(bool boolflag);
+extern void set_pin_ADCA1(bool boolflag);
+extern void set_pin_ADCA2(bool boolflag);
+static void ADG1408_output(struct ADG1408_pin_t *adc_sel)
+{
+    set_pin_ADCA0(adc_sel->A0);
+    set_pin_ADCA1(adc_sel->A1);
+    set_pin_ADCA2(adc_sel->A2);
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("ADC selector [A2,A1,A0]: %d%d%d", adc_sel->A2, adc_sel->A1, adc_sel->A0);
+    #endif
+}
+
+/*
+ *  +----+----------+
+ *  |    | A2 A1 A0 |
+ *  +----+----------+
+ *  | S1 | 0  0  0  |
+ *  | S2 | 0  0  1  |
+ *  | S3 | 0  1  0  |
+ *  | S4 | 0  1  1  |
+ *  | S5 | 1  0  0  |
+ *  | S6 | 1  0  1  |
+ *  | S7 | 1  1  0  |
+ *  | S8 | 1  1  1  |
+ *  +----+----------+
+ */
+static void ADG1408_select_channel(uint8_t selector)
+{
+    struct ADG1408_pin_t adc_select;
+
+    switch (selector) {
+        case ADG1408_S1:
+            adc_select.A0 = 0;
+            adc_select.A1 = 0;
+            adc_select.A2 = 0;
+            break; 
+        case ADG1408_S2:
+            adc_select.A0 = 1;
+            adc_select.A1 = 0;
+            adc_select.A2 = 0;
+            break;
+        case ADG1408_S3:
+            adc_select.A0 = 0;
+            adc_select.A1 = 1;
+            adc_select.A2 = 0;
+            break;
+        case ADG1408_S4:
+            adc_select.A0 = 1;
+            adc_select.A1 = 1;
+            adc_select.A2 = 0;
+            break;
+        case ADG1408_S5:
+            adc_select.A0 = 0;
+            adc_select.A1 = 0;
+            adc_select.A2 = 1;
+            break;
+        case ADG1408_S6:
+            adc_select.A0 = 1;
+            adc_select.A1 = 0;
+            adc_select.A2 = 1;
+            break;
+        case ADG1408_S7:
+            adc_select.A0 = 0;
+            adc_select.A1 = 1;
+            adc_select.A2 = 1;
+            break;
+        case ADG1408_S8:
+            adc_select.A0 = 1;
+            adc_select.A1 = 1;
+            adc_select.A2 = 1;
+            break;
+    }
+
+    ADG1408_output(&adc_select);
+
+}
+
+/** 
+    @brief Select ADC channel.
+    @param channel ADC_CH_VHP0 / ADC_CH_VHN0 / ADC_CH_IsenHP / ADC_CH_IsenHN
+                   ADC_CH_VHP12 / ADC_CH_Vdiff / ADC_CH_VHP1 / ADC_CH_VHN1
+*/
+void select_adc_channel(uint8_t channel)
+{
+    static uint8_t last_channel = 0xFF;
+
+    if (last_channel == channel) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("select_adc_channel same channel(%d)", channel);
+        #endif
+        return;
+    }
+
+    switch (channel) {
+        case ADC_CH_VHP0:
+            ADG1408_select_channel(ADG1408_S1);
+            break;
+        case ADC_CH_VHN0:
+            ADG1408_select_channel(ADG1408_S2);
+            break;
+        case ADC_CH_IsenHP:
+            ADG1408_select_channel(ADG1408_S3);
+            break;
+        case ADC_CH_IsenHN:
+            ADG1408_select_channel(ADG1408_S4);
+            break;
+        case ADC_CH_VHP12:
+            ADG1408_select_channel(ADG1408_S5);
+            break;
+        case ADC_CH_Vdiff:
+            ADG1408_select_channel(ADG1408_S6);
+            break;
+        case ADC_CH_VHP1:
+            ADG1408_select_channel(ADG1408_S7);
+            break;
+        case ADC_CH_VHN1:
+            ADG1408_select_channel(ADG1408_S8);
+            break;
+    }
+
+    last_channel = channel;
+}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/HAL/ADGS1412x9.h

@@ -0,0 +1,245 @@
+#include <stdint.h>
+#include "app_config.h"
+
+#if(!CC2650_CODE)
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+#endif
+
+struct ADGS1412_component_conf_t {
+  uint8_t U14;
+  uint8_t U13;
+  uint8_t U18;
+  uint8_t U20;
+  uint8_t U26;
+  uint8_t U29;
+  uint8_t U22;
+  uint8_t U4;
+  uint8_t U24;
+};
+
+struct ADGS1412_component_conf_t ADGS1412_conf = {0};
+
+void ADGS1412_daisy_chain_mode(void)
+{
+    uint8_t cmd_daisy_chain[2] = {0x25, 0x00};
+
+    #if(CC2650_CODE)
+    spi1_open(SPI_CLK_12M, POL1, PHA0);
+    set_pin_SWCSBB(0);
+    spi1_write(NULL, cmd_daisy_chain, sizeof(cmd_daisy_chain));
+    set_pin_SWCSBB(1);
+    spi1_close();
+    #else
+    NRF_LOG_INFO("ADGS1412_daisy_chain_mode");
+    NRF_LOG_HEXDUMP_INFO(cmd_daisy_chain, sizeof(cmd_daisy_chain));
+    #endif
+}
+
+
+/*
+ * spi:
+ * |U14|U13|U18|U20|U26|U29|U22| U4|U24|
+ */
+static void ADGS1412_output(void)
+{
+    uint8_t spi_array[9] = {ADGS1412_conf.U14, ADGS1412_conf.U13, ADGS1412_conf.U18, 
+                            ADGS1412_conf.U20, ADGS1412_conf.U26, ADGS1412_conf.U29,
+                            ADGS1412_conf.U22, ADGS1412_conf.U4, ADGS1412_conf.U24};
+
+    #if(CC2650_CODE)
+    spi1_open(SPI_CLK_12M, POL1, PHA0);
+    set_pin_SWCSBB(0);
+    spi1_write(spi_array, spi_array, sizeof(spi_array));
+    set_pin_SWCSBB(1);
+    spi1_close();
+    #else
+    NRF_LOG_HEXDUMP_INFO(spi_array, sizeof(spi_array));
+    #endif
+}
+
+/*
+ * (0 = open circuit)
+ * (1 = closed circuit)
+ * +-----+-------------+
+ * |     | S4 S3 S2 S1 |
+ * +-----+-------------+
+ * | U14 | 0  0  0  0  |
+ * | U13 | 0  0  0  0  |
+ * | U18 | 0  0  0  0  |
+ * | U20 | 1  1  1  1  |
+ * | U26 | 0  0  0  0  |
+ * | U29 | 0  0  0  0  |
+ * | U22 | 0  0  0  0  |
+ * | U4  | 1  0  0  0  |
+ * | U24 | 0  0  1  0  |
+ * +-----+-------------+
+ */
+void ADGS1412_idle_conf(void)
+{
+    // if (ADGS1412_conf.U14 == ADGS1412_ALL_DIS &&
+    //     ADGS1412_conf.U13 == ADGS1412_ALL_DIS &&
+    //     ADGS1412_conf.U18 == ADGS1412_ALL_DIS &&
+    //     ADGS1412_conf.U20 == (ADGS1412_S1_EN | ADGS1412_S2_EN | ADGS1412_S3_EN | ADGS1412_S4_EN) &&
+    //     ADGS1412_conf.U26 == ADGS1412_ALL_DIS &&
+    //     ADGS1412_conf.U29 == ADGS1412_ALL_DIS &&
+    //     ADGS1412_conf.U22 == ADGS1412_ALL_DIS &&
+    //     ADGS1412_conf.U4  == ADGS1412_S4_EN &&
+    //     ADGS1412_conf.U24 == ADGS1412_S2_EN) {
+    //     #if(!CC2650_CODE)
+    //     NRF_LOG_INFO("ADGS1412_idle_conf same signal");
+    //     #endif
+    //     return;
+    // }
+
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("ADGS1412_idle_conf |U14|U13|U18|U20|U26|U29|U22| U4|U24|");
+    #endif
+    ADGS1412_conf.U14 = ADGS1412_ALL_DIS;
+    ADGS1412_conf.U13 = ADGS1412_ALL_DIS;
+    ADGS1412_conf.U18 = ADGS1412_ALL_DIS;
+    ADGS1412_conf.U20 = ADGS1412_S1_EN | ADGS1412_S2_EN | ADGS1412_S3_EN | ADGS1412_S4_EN;
+    ADGS1412_conf.U26 = ADGS1412_ALL_DIS;
+    ADGS1412_conf.U29 = ADGS1412_ALL_DIS;
+    ADGS1412_conf.U22 = ADGS1412_ALL_DIS;
+    ADGS1412_conf.U4  = ADGS1412_S4_EN;
+    ADGS1412_conf.U24 = ADGS1412_S2_EN;
+
+    ADGS1412_output();
+}
+
+/** 
+    @brief Set status of ADGS1412 component.
+    @param component_id ADGS1412_U14 / ADGS1412_U13 / ADGS1412_U18 /
+                        ADGS1412_U20 / ADGS1412_U26 / ADGS1412_U29 /
+                        ADGS1412_U22 / ADGS1412_U04 / ADGS1412_U24
+    @param set_value    ADGS1412_ALL_DIS / ADGS1412_S1_EN /ADGS1412_S2_EN /
+                        ADGS1412_S3_EN / ADGS1412_S4_EN
+*/
+void ADGS1412_set_one_mux(uint8_t component_id, uint8_t set_value)
+{
+    switch (component_id) {
+        case ADGS1412_U14:
+            if (ADGS1412_conf.U14 == set_value) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("ADGS1412_set_one_mux(U14) same signal(%02x)", set_value);
+                #endif
+                return;
+            }
+            ADGS1412_conf.U14 = set_value;
+            break;
+        case ADGS1412_U13:
+            if (ADGS1412_conf.U13 == set_value) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("ADGS1412_set_one_mux(U13) same signal(%02x)", set_value);
+                #endif
+                return;
+            }
+            ADGS1412_conf.U13 = set_value;
+            break;
+        case ADGS1412_U18:
+            if (ADGS1412_conf.U18 == set_value) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("ADGS1412_set_one_mux(U18) same signal(%02x)", set_value);
+                #endif
+                return;
+            }
+            ADGS1412_conf.U18 = set_value;
+            break;
+        case ADGS1412_U20:
+            if (ADGS1412_conf.U20 == set_value) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("ADGS1412_set_one_mux(U20) same signal(%02x)", set_value);
+                #endif
+                return;
+            }
+            ADGS1412_conf.U20 = set_value;
+            break;
+        case ADGS1412_U26:
+            if (ADGS1412_conf.U26 == set_value) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("ADGS1412_set_one_mux(U26) same signal(%02x)", set_value);
+                #endif
+                return;
+            }
+            ADGS1412_conf.U26 = set_value;
+            break;
+        case ADGS1412_U29:
+            if (ADGS1412_conf.U29 == set_value) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("ADGS1412_set_one_mux(U29) same signal(%02x)", set_value);
+                #endif
+                return;
+            }
+            ADGS1412_conf.U29 = set_value;
+            break;
+        case ADGS1412_U22:
+            if (ADGS1412_conf.U22 == set_value) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("ADGS1412_set_one_mux(U22) same signal(%02x)", set_value);
+                #endif
+                return;
+            }
+            ADGS1412_conf.U22 = set_value;
+            break;
+        case ADGS1412_U04:
+            if (ADGS1412_conf.U4 == set_value) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("ADGS1412_set_one_mux(U04) same signal(%02x)", set_value);
+                #endif
+                return;
+            }
+            ADGS1412_conf.U4 = set_value;
+            break;
+        case ADGS1412_U24:
+            if (ADGS1412_conf.U24 == set_value) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("ADGS1412_set_one_mux(U24) same signal(%02x)", set_value);
+                #endif
+                return;
+            }
+            ADGS1412_conf.U24 = set_value;
+            break;
+    }
+
+    ADGS1412_output();
+}
+
+/** 
+    @brief Get status of ADGS1412 component.
+    @param component_id ADGS1412_U14 / ADGS1412_U13 / ADGS1412_U18 /
+                        ADGS1412_U20 / ADGS1412_U26 / ADGS1412_U29 /
+                        ADGS1412_U22 / ADGS1412_U04 / ADGS1412_U24
+*/
+uint8_t ADGS1412_get_one_mux(uint8_t component_id)
+{
+    if (component_id == ADGS1412_U14)
+        return ADGS1412_conf.U14;
+
+    if (component_id == ADGS1412_U13)
+        return ADGS1412_conf.U13;
+
+    if (component_id == ADGS1412_U18)
+        return ADGS1412_conf.U18;
+
+    if (component_id == ADGS1412_U20)
+        return ADGS1412_conf.U20;
+
+    if (component_id == ADGS1412_U26)
+        return ADGS1412_conf.U26;
+
+    if (component_id == ADGS1412_U29)
+        return ADGS1412_conf.U29;
+
+    if (component_id == ADGS1412_U22)
+        return ADGS1412_conf.U22;
+
+    if (component_id == ADGS1412_U04)
+        return ADGS1412_conf.U4;
+
+    if (component_id == ADGS1412_U24)
+        return ADGS1412_conf.U24;
+
+    return 0;
+}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/HAL/ADS8691x1.h

@@ -0,0 +1,330 @@
+/*
+ * ADS8691
+ * Features:
+ *     -18-Bit ADC With Integrated Analog Front-End
+ *     -High Speed: 1 MSPS
+ *
+ * Spi data:
+ *      1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *     |    Input    |  9-bit address  |          16-bit data          |
+ *     |   Commands  |                 |                               |
+ *     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *     
+ *     -CMD [7bits]
+ *      0b11000xx CLEAR_HWORD
+ *      0b11001xx READ_HWORD
+ *      0b01001xx READ
+ *      0b1101000 WRITE (We used this CMD)
+ *      0b1101001 WRITE
+ *      0b1101010 WRITE
+ *      0b11011xx SET_HWORD
+ *     
+ *     -Address [9bits]
+ *      00h DEVICE_ID_REG
+ *      04h RST_PWRCTL_REG
+ *      08h SDI_CTL_REG 
+ *      0Ch SDO_CTL_REG
+ *      10h DATAOUT_CTL_REG
+ *      14h RANGE_SEL_REG
+ *      20h ALARM_REG
+ *      24h ALARM_H_TH_REG
+ *      28h ALARM_L_TH_REG
+ * 
+ */
+#include <stdint.h>
+#include "app_config.h"
+
+#if(!CC2650_CODE)
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+#endif
+
+static uint8_t ADC_input_range = 0xFF;
+
+#define ADS8691_CMD_WRITE 0b1101000
+
+#define ADS8691_ADDRESS_RST_PWRCTL_REG  0x0004
+#define ADS8691_ADDRESS_SDI_CTL_REG     0x0008
+#define ADS8691_ADDRESS_DATAOUT_CTL_REG 0x0010
+#define ADS8691_ADDRESS_RANGE_SEL_REG   0x0014
+
+static uint32_t ADS8691_write_spi(uint8_t command, uint16_t address, uint16_t data)
+{
+    uint8_t spi_array[4];
+
+    spi_array[0] = command<<1 | address>>8;
+    spi_array[1] = address & 0xFF;
+    spi_array[2] = HIGH_BYTES_16b(data);
+    spi_array[3] = LOW_BYTES_16b(data);
+
+    #if(CC2650_CODE)
+    spi1_open(SPI_CLK_12M, POL1, PHA0);
+    set_pin_ADCCS(0);
+    spi1_write(spi_array, spi_array, sizeof(spi_array));
+    set_pin_ADCCS(1);
+    spi1_close();
+    #else
+    NRF_LOG_INFO("ADS8691_write_spi");
+    NRF_LOG_HEXDUMP_INFO(spi_array, sizeof(spi_array));
+    spi_array[0] = 0x8c;//0x8C8F4400
+    spi_array[1] = 0x8f;//0x8C8F4400
+    spi_array[2] = 0x44;//0x8C8F4400
+    spi_array[3] = 0x00;//0x8C8F4400
+    #endif
+
+    uint32_t value = spi_array[0]<<24 | spi_array[1]<<16 | spi_array[2]<<8 | spi_array[3];
+
+    return value;
+}
+
+/**** SDI_CTL_REG Register ******************************************************************************/
+static void set_ads8691_spi_mode_as_pol1_pha0(void)
+{
+    struct para_SDI_CTL_REG_t {
+        uint16_t rsvd_1:14,
+                SDI_MODE:2;
+    };
+
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("ADC set_ads8691_spi_mode_as_pol1_pha0");
+    #endif
+    struct para_SDI_CTL_REG_t reg_data = {0};
+    uint16_t val;
+
+    // set conf
+    reg_data.SDI_MODE = 0x02;
+
+    // combine
+    val = reg_data.SDI_MODE;
+
+    ADS8691_write_spi(ADS8691_CMD_WRITE, ADS8691_ADDRESS_SDI_CTL_REG, val);
+}
+
+/**** RST_PWRCTL_REG Register ******************************************************************************/
+static void reset_quickly(void)
+{
+    struct para_RST_PWRCTL_REG_t {
+        uint16_t WKEY:8,
+                rsvd_1:2,
+                VDD_AL_DIS:1,
+                IN_AL_DIS:1,
+                rsvd_2:1,
+                RSTn_APP:1,
+                NAP_EN:1,
+                PWRDN:1;
+    };
+
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("ADC reset_quickly");
+    #endif
+    struct para_RST_PWRCTL_REG_t reg_data = {0};
+    uint16_t val;
+
+    // set conf
+    reg_data.WKEY = 0x69;
+    reg_data.RSTn_APP = 1;
+
+    // combine
+    val = reg_data.WKEY<<8 | reg_data.VDD_AL_DIS<<5 | 
+          reg_data.IN_AL_DIS<<4 | reg_data.RSTn_APP<<2 |
+          reg_data.NAP_EN<<1 | reg_data.PWRDN;
+
+    ADS8691_write_spi(ADS8691_CMD_WRITE, ADS8691_ADDRESS_RST_PWRCTL_REG, val);
+}
+
+/**** DATAOUT_CTL_REG Register ******************************************************************************/
+static uint32_t get_18bit_adc_value(void)
+{
+    struct para_DATAOUT_CTL_REG_t {
+        uint16_t rsvd_1:1,
+                DEVICE_ADDR_INCL:1,
+                VDD_ACTIVE_ALARM_INCL:2,
+                IN_ACTIVE_ALARM_INCL:2,
+                rsvd_2:1,
+                RANGE_INCL:1,
+                rsvd_3:4,
+                PAR_EN:1,
+                DATA_VAL:3;
+        };
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("get_18bit_adc_value()");
+    #endif
+    struct para_DATAOUT_CTL_REG_t reg_data = {0};
+    uint32_t spi_rx;
+    uint16_t val;
+
+    // set conf
+    reg_data.RANGE_INCL = 1;
+
+    // combine
+    val = reg_data.DEVICE_ADDR_INCL<<14 | reg_data.VDD_ACTIVE_ALARM_INCL<<12 | 
+          reg_data.IN_ACTIVE_ALARM_INCL<<10 | reg_data.RANGE_INCL<<8 |
+          reg_data.PAR_EN<<3 | reg_data.DATA_VAL;
+                   
+    spi_rx = ADS8691_write_spi(ADS8691_CMD_WRITE, ADS8691_ADDRESS_DATAOUT_CTL_REG, val);
+
+    return spi_rx>>14;
+}
+
+/**** RANGE_SEL_REG Register ******************************************************************************/
+#define p_n_3_0_Vref        0b0000   //ADC measure range: +-12.288V      LSB:93.75uV
+#define p_n_2_5_Vref        0b0001   //ADC measure range: +-10.24V       LSB:78.125uV
+#define p_n_1_5_Vref        0b0010   //ADC measure range: +-6.144V       LSB:46.875uV
+#define p_n_1_25_Vref       0b0011   //ADC measure range: +-5.12V        LSB:39.06uV
+#define p_n_0_625_Vref      0b0100   //ADC measure range: +-2.56V        LSB:19.53uV
+#define p_3_0_Vref          0b1000   //ADC measure range: 0V ~ +12.288V  LSB:46.875uV
+#define p_2_5_Vref          0b1001   //ADC measure range: 0V ~ +10.24V   LSB:39.06uV
+#define p_1_5_Vref          0b1010   //ADC measure range: 0V ~ +6.144V   LSB:23.43uV
+#define p_1_25_Vref         0b1011   //ADC measure range: 0V ~ +5.12V    LSB:19.53uV
+int8_t set_adc_input_range(uint8_t range)
+{
+    struct para_RANGE_SEL_REG_t {
+        uint16_t rsvd_1:8,
+                rsvd_2:1,
+                INTREF_DIS:1,
+                rsvd_3:2,
+                RANGE_SEL:4;
+    };
+
+    struct para_RANGE_SEL_REG_t reg_data = {0};
+    uint16_t val;
+
+    if (ADC_input_range == range) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_adc_input_range same range");
+        #endif
+        return -1;
+    }
+
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_adc_input_range(%d)", range);
+    #endif
+
+    // set conf
+    switch (range) {
+        case ADC_MEASURE_RANGE_12V_PN:
+            reg_data.RANGE_SEL = p_n_3_0_Vref;
+            break;
+        case ADC_MEASURE_RANGE_10V_PN:
+            reg_data.RANGE_SEL = p_n_2_5_Vref;
+            break;
+        case ADC_MEASURE_RANGE_06V_PN:
+            reg_data.RANGE_SEL = p_n_1_5_Vref;
+            break;
+        case ADC_MEASURE_RANGE_05V_PN:
+            reg_data.RANGE_SEL = p_n_1_25_Vref;
+            break;
+        case ADC_MEASURE_RANGE_02V_PN:
+            reg_data.RANGE_SEL = p_n_0_625_Vref;
+            break;
+        // case p_3_0_Vref:
+        //     reg_data.RANGE_SEL = p_3_0_Vref;
+        //     break;
+        // case p_2_5_Vref:
+        //     reg_data.RANGE_SEL = p_2_5_Vref;
+        //     break;
+        // case p_1_5_Vref:
+        //     reg_data.RANGE_SEL = p_1_5_Vref;
+        //     break;
+        // case p_1_25_Vref:
+        //     reg_data.RANGE_SEL = p_1_25_Vref;
+        //     break;
+    }
+
+    // combine
+    val = reg_data.INTREF_DIS<<6 | reg_data.RANGE_SEL;
+    ADS8691_write_spi(ADS8691_CMD_WRITE, ADS8691_ADDRESS_RANGE_SEL_REG, val);
+    ADC_input_range = range;
+
+    return 0;
+}
+
+uint8_t get_adc_input_range(void)
+{
+    return ADC_input_range;
+}
+
+int32_t get_adc_voltage_uV(void)
+{
+
+    uint32_t adc_raw = get_18bit_adc_value();
+    int64_t adc_voltage_uV;
+
+    if (ADC_input_range == ADC_MEASURE_RANGE_12V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 93.75 - 12288000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_10V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 78.125 - 10240000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_06V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 46.875 - 6144000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_05V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 39.06 - 5120000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_02V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 19.53 - 2560000; //uV
+
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("get_adc_voltage_uV adc_raw=%d, adc_voltage_uV=%d", adc_raw, adc_voltage_uV);
+    #endif
+
+    return (int32_t)adc_voltage_uV;
+}
+
+int32_t get_adc_HPvoltage_uV(void)
+{
+
+    uint32_t adc_raw = get_18bit_adc_value(); //max:262143
+    int64_t adc_voltage_uV;
+
+    if (ADC_input_range == ADC_MEASURE_RANGE_12V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 93.75 - 12288000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_10V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 78.125 - 10240000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_06V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 46.875 - 6144000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_05V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 39.06 - 5120000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_02V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 19.53 - 2560000; //uV
+
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("get_adc_voltage_uV adc_raw=%d, adc_voltage_uV=%d", adc_raw, adc_voltage_uV);
+    #endif
+
+    return (int32_t)adc_voltage_uV;
+}
+
+int32_t get_adc_HNvoltage_uV(void)
+{
+
+    uint32_t adc_raw = get_18bit_adc_value();
+    notify_ch6 = adc_raw;
+    int64_t adc_voltage_uV;
+
+    if (ADC_input_range == ADC_MEASURE_RANGE_12V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 93.75 - 12288000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_10V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 78.125 - 10240000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_06V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 46.875 - 6144000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_05V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 39.06 - 5120000; //uV
+    else if (ADC_input_range == ADC_MEASURE_RANGE_02V_PN)
+        adc_voltage_uV = (int64_t)adc_raw * 19.53 - 2560000; //uV
+
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("get_adc_voltage_uV adc_raw=%d, adc_voltage_uV=%d", adc_raw, adc_voltage_uV);
+    #endif
+
+    return (int32_t)adc_voltage_uV;
+}
+
+/* 
+ * initial 18-Bit ADC
+ * -reset quickly
+ */
+void ADS8691_init(void)
+{
+    set_ads8691_spi_mode_as_pol1_pha0();
+    reset_quickly();
+}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/HAL/APA102_2020_256_8x4.h

@@ -0,0 +1,63 @@
+#ifndef APA102_2020_256_8X4_H
+#define APA102_2020_256_8X4_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif   
+
+#define LED_TANDEM_N  4
+
+enum led_series_nb_e {
+    LED_NB_1 = 0,
+    LED_NB_2,
+    LED_NB_3,
+    LED_NB_4,
+
+    LED_NB_MAX = LED_TANDEM_N,
+};
+
+enum led_bright_e {
+    LED_BR_LV0  = 0x00,
+    LED_BR_LV1  = 0x01,
+    LED_BR_LV8  = 0x08,
+
+    LED_BR_MAX  = 0x1F,
+};
+
+enum led_color_e {
+    LED_CLR_BLACK = 0,
+    LED_CLR_WHITE,
+    LED_CLR_RED,
+    LED_CLR_ORANGE,
+    LED_CLR_YELLOW,
+    LED_CLR_GREEN,
+    LED_CLR_CYAN,
+    LED_CLR_BLUE,
+    LED_CLR_PURPLE,
+    LED_CLR_MAGENTA,
+    LED_CLR_YELLOWGREEN,
+    LED_CLR_EMERALD,
+
+    LED_CLR_MAX,
+};
+
+struct led_color_t {
+    uint8_t b;
+    uint8_t g;
+    uint8_t r;    
+};
+
+struct led_frame_t {
+    uint8_t bright: 5,
+            rsvd: 3;
+    struct led_color_t color;
+};
+
+int led_color_set(enum led_series_nb_e led_nb, enum led_bright_e bright, enum led_color_e color);
+int led_color_code_set(enum led_series_nb_e led_nb, enum led_bright_e bright, struct led_color_t *color);
+int led_rainbow(enum led_bright_e bright);
+
+#ifdef __cplusplus
+}
+#endif
+#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/HAL/APA102_2020_256_8x4_c.h

@@ -1,4 +1,19 @@
-#include "hardware/led_APA_102.h"
+/*
+ *  APA-102-2020-256-8A-20190612: Series data structure
+ *    +-------------------+------------------------- ... -+-----------------+
+ *    |  start_frame(4B)  |  led_frame(4B) *LED_TANDEM_N  |  end_frame(4B)  |
+ *    +-------------------+------------------------- ... -+-----------------+
+ *                       /                \
+ *                     /   led_frame(4B)   \
+ *                   /                      \
+ *       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      | 111 | bright  |      blue     |     green     |      red      |
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ */
+
+#include "HAL/APA102_2020_256_8x4.h"
+#include "HAL/cc2650_driver/spi_ctrl.h"
 
 #define LED_FRME_FILL_RSVD(_f)      (_f)->rsvd = 0x07 // 0x11100000 || bright
 #define LED_SERIES_D_START          0x00000000
@@ -98,9 +113,9 @@ static int __led_color_set(enum led_series_nb_e led_nb, struct led_frame_t *led_
     }
 
     __led_complete(sd);
-    
-#define WRITE_TO_HW(_d, _l) spi0_write(NULL, (uint8_t *)(_d), (_l))
-    WRITE_TO_HW(sd, sizeof(struct led_series_data_t));
+    spi0_open(SPI_CLK_10M, POL0, PHA1); //10M   // SPI0  = LED
+    spi0_write(NULL, (void *)(sd), sizeof(struct led_series_data_t));
+    spi0_close();
 
     return 0;
 }

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/HAL/MAX5136x2.h

@@ -0,0 +1,137 @@
+/*
+ * MAX5136
+ *  CLR: Software clear.
+ *       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      |0 0 0 0 0 0 1 0|x x x x x x x x|x x x x x x x x|
+ *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * 
+ *  Write-through: Write to selected input and DAC registers, DAC outputs updated(writethrough).
+ *       0 1 2 3  4  5  6  7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 
+ *      +-+-+-+-+--+--+--+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *      |0 0 1 1 D3 D2 D1 D0|         dac_code              |
+ *      +-+-+-+-+--+--+--+--+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ */
+#include <stdint.h>
+#include "app_config.h"
+
+#if(!CC2650_CODE)
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+#endif
+
+// Elite Conponent id:
+#define COMPONENT_DAC_U38           0x00 // spi_sequence:first
+#define COMPONENT_DAC_U37           0x01 // spi_sequence:second
+#define COMPONENT_DAC_MAX           0x02
+
+// MAX5136 Command Codes
+#define  MAX5136_CMD_NOP            0x00 //!< No operation
+#define  MAX5136_CMD_UPDATE         0x01 //!< Move contents of input to DAC registers indicated by 1’s. No effect on registers indicated by 0’s.
+#define  MAX5136_CMD_CLR            0x02 //!< Software clear.
+#define  MAX5136_CMD_POWER_DOWN     0x03 //!< Power down n
+#define  MAX5136_CMD_OPTIMIZE       0x05 //!< Optimize DAC linearity.
+#define  MAX5136_CMD_WRITE          0x10 //!< Write to selected input registers (DAC output not affected).
+#define  MAX5136_CMD_WRITE_UPDATE   0x30 //!< Write to selected input and DAC registers, DAC outputs updated(writethrough).
+
+// Internal pins of MAX5136
+#define  MAX5136_OUT0               0x01
+#define  MAX5136_OUT1               0x02
+#define  MAX5136_OUT2               0x04 // MAX5136 isn't exist
+#define  MAX5136_OUT3               0x08 // MAX5136 isn't exist
+#define  MAX5136_OUT_ALL            0x0F
+
+struct max5136_dac_code_t {
+    uint16_t out0_dac_code;
+    uint16_t out1_dac_code;
+};
+
+struct max5136_dac_code_t max5136_u38 = {0};
+struct max5136_dac_code_t max5136_u37 = {0};
+
+/** 
+    @brief Use write through mode to control U37 & U38 output.
+    (The option is limited to selecting a single chip(component) for control.
+     But could control OUT0~OUT3 on one chip.)
+    @param dac_component COMPONENT_DAC_U37 / COMPONENT_DAC_U38
+    @param dac_command MAX5136_CMD_WRITE_UPDATE / MAX5136_CMD_CLR / ...
+    @param dac_address MAX5136_OUT1 / MAX5136_OUT2
+    @param dac_code 0-65535
+*/
+static void MAX5136_write_through(uint8_t dac_component, uint8_t dac_command, uint8_t dac_address, uint16_t dac_code)
+{
+    uint8_t spi_array[3 * COMPONENT_DAC_MAX] = {0};
+
+    spi_array[dac_component*3+0] = dac_command | dac_address;
+    spi_array[dac_component*3+1] = HIGH_BYTES_16b(dac_code);
+    spi_array[dac_component*3+2] = LOW_BYTES_16b(dac_code);
+
+    #if(CC2650_CODE)
+    spi1_open(SPI_CLK_12M, POL1, PHA0);
+    set_pin_DACCS(0);
+    spi1_write(spi_array, spi_array, sizeof(spi_array));
+    set_pin_DACCS(1);
+    spi1_close();
+    #else
+    NRF_LOG_INFO("MAX5136_write_through");
+    NRF_LOG_HEXDUMP_INFO(spi_array, sizeof(spi_array));
+    #endif
+}
+
+/**
+    @brief Configure the voltage of external OUT_0 to OUT_3 pins on the two MAX5136 chips.
+    @param out_pin DAC_OUT_0 / DAC_OUT_1 / DAC_OUT_2 / DAC_OUT_3
+    @param dac_code 0-65535
+    example:
+         if you want to set OUT_3 pin voltage: 1.22V
+         fomular: 2.44 * dac_code / 65536 = OUT_x's voltage
+               -> 2.44 * dac_code / 65536 = 1.22V
+               -> so dac_code = 32768
+               -> call OUT_n_output(DAC_OUT_3, 32768);
+ */
+void OUT_n_output(uint8_t out_pin, uint16_t dac_code)
+{
+    switch (out_pin) {
+        case DAC_OUT_0:
+            if (max5136_u38.out0_dac_code == dac_code) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("OUT_n_output(OUT_0) same dac code(%02x)", dac_code);
+                #endif
+                return;
+            }
+            max5136_u38.out0_dac_code = dac_code;
+            MAX5136_write_through(COMPONENT_DAC_U38, MAX5136_CMD_WRITE_UPDATE, MAX5136_OUT0, max5136_u38.out0_dac_code);
+            break;
+        case DAC_OUT_1:
+            if (max5136_u38.out1_dac_code == dac_code) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("OUT_n_output(OUT_1) same dac code(%02x)", dac_code);
+                #endif
+                return;
+            }
+            max5136_u38.out1_dac_code = dac_code;
+            MAX5136_write_through(COMPONENT_DAC_U38, MAX5136_CMD_WRITE_UPDATE, MAX5136_OUT1, max5136_u38.out1_dac_code);
+            break;
+        case DAC_OUT_2:
+            if (max5136_u37.out0_dac_code == dac_code) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("OUT_n_output(OUT_2) same dac code(%02x)", dac_code);
+                #endif
+                return;
+            }
+            max5136_u37.out0_dac_code = dac_code;
+            MAX5136_write_through(COMPONENT_DAC_U37, MAX5136_CMD_WRITE_UPDATE, MAX5136_OUT0, max5136_u37.out0_dac_code);
+            break;
+        case DAC_OUT_3:
+            if (max5136_u37.out1_dac_code == dac_code) {
+                #if(!CC2650_CODE)
+                NRF_LOG_INFO("OUT_n_output(OUT_3) same dac code(%02x)", dac_code);
+                #endif
+                return;
+            }
+            max5136_u37.out1_dac_code = dac_code;
+            MAX5136_write_through(COMPONENT_DAC_U37, MAX5136_CMD_WRITE_UPDATE, MAX5136_OUT1, max5136_u37.out1_dac_code);
+            break;
+    }
+}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/HAL/MCP23008x2.h

@@ -0,0 +1,534 @@
+/*
+ *  MCP23008: Series data structure
+ *  I2C
+ *   -Write:
+ *    +---------------------+------------------------+-------------+
+ *    |  Device Opcode(1B)  |  Register Address(1B)  |  Value(1B)  |
+ *    +---------------------+------------------------+-------------+
+ *      /                \
+ *     / Device Opcode(1B)\
+ *    /                    \
+ *     0 1 2 3 4  5  6   7  
+ *    +-+-+-+-+--+--+--+---+
+ *    | 0100  |A2 A1 A0 R/W|
+ *    +-+-+-+-+--+--+--+---+                 (CC2650's I2C could read and write in the same time)
+ *    ps.CC2650 I2C parameter:            -> U503(PB) set GPIO=74h | U505(PA) set GPIO=45h
+ *       I2C_addr = 0b 0 1 0 0 A2 A1 A0   -> 0b0100011 = [23h]     | 0b0100110 = [26h]
+ *       tx = Register Address + Value    -> [09h 74h]             | [09h 45h]
+ *       txlen=2
+ *       rxlen=2
+ * 
+ * 
+ *   -Read:
+ *    +---------------------+------------------------+
+ *    |  Device Opcode(1B)  |  Register Address(1B)  |
+ *    +---------------------+------------------------+
+ *      /                \
+ *     / Device Opcode(1B)\
+ *    /                    \
+ *     0 1 2 3 4  5  6   7  
+ *    +-+-+-+-+--+--+--+---+
+ *    | 0100  |A2 A1 A0 R/W|
+ *    +-+-+-+-+--+--+--+---+                 (CC2650's I2C could read and write in the same time)
+ *    ps.CC2650 I2C parameter:            -> U503(PB) get GPIO | U505(PA) get GPIO
+ *       I2C_addr = 0b 0 1 0 0 A2 A1 A0   -> 0b0100011 = [23h] | 0b0100110 = [26h]
+ *       tx = Register Address            -> [09h]             | [09h]
+ *       txlen=1
+ *       rxlen=1
+ *    
+ */
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "app_config.h"
+
+#if(!CC2650_CODE)
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+#endif
+
+#define PA_MODULE_I2C_ADDR  0x26
+#define PB_MODULE_I2C_ADDR  0x23
+
+enum mcp23008_reg_name_e {
+    MCP23008_REG_IODIR = 0x00,      /*IODIR – I/O DIRECTION REGISTER (ADDR 0x00)*/
+    MCP23008_REG_IPOL,              /*IPOL – INPUT POLARITY PORT REGISTER (ADDR 0x01)*/
+    MCP23008_REG_GPINTEN,           /*GPINTEN – INTERRUPT-ON-CHANGE PINS (ADDR 0x02)*/
+    MCP23008_REG_DEFVAL,            /*DEFVAL – DEFAULT VALUE REGISTER (ADDR 0x03)*/
+    MCP23008_REG_INTCON,            /*INTCON – INTERRUPT-ON-CHANGE CONTROL REGISTER (ADDR 0x04)*/
+    MCP23008_REG_IOCON,             /*IOCON – I/O EXPANDER CONFIGURATION REGISTER (ADDR 0x05)*/
+    MCP23008_REG_GPPU,              /*GPPU – GPIO PULL-UP RESISTOR REGISTER (ADDR 0x06)*/
+    MCP23008_REG_INTF,              /*INTF – INTERRUPT FLAG REGISTER (ADDR 0x07)*/
+    MCP23008_REG_INTCAP,            /*INTCAP – INTERRUPT CAPTURED VALUE FOR PORT REGISTER (ADDR 0x08)*/
+    MCP23008_REG_GPIO,              /*GPIO – GENERAL PURPOSE I/O PORT REGISTER (ADDR 0x09)*/
+    MCP23008_REG_OLAT,              /*OLAT – OUTPUT LATCH REGISTER 0 (ADDR 0x0A)*/
+    
+    MCP23008_REG_MAX,
+};
+
+struct mcp23008_reg_name_t {
+    uint8_t iodir;
+    uint8_t gpio;
+};
+
+struct mcp23008_reg_name_t mcp23008_pa = {0};
+struct mcp23008_reg_name_t mcp23008_pb = {0};
+
+/* 
+ * Write MCP23008(PA)'s GPIO or IODIR
+ * - if want to set PA7~0's GPIO = 74h
+ *      i2c addr = [26h]
+ *      i2c tx   = [09 74]
+ * - if want to set PA7~0's IODIR = 02h (PA1 is output)
+ *      i2c addr = [26h]
+ *      i2c tx   = [00 02]
+ */
+static uint8_t MCP23008_PA_write(enum mcp23008_reg_name_e reg)
+{
+    uint8_t i2c_array[2] = {reg};
+
+    switch (reg) {
+        case MCP23008_REG_IODIR:
+            i2c_array[1] = mcp23008_pa.iodir;
+            break;
+        
+        case MCP23008_REG_GPIO:
+            i2c_array[1] = mcp23008_pa.gpio;
+            break;
+    }
+
+    #if(CC2650_CODE)
+    i2c0_write(I2C_BITRATE_400K, PA_MODULE_I2C_ADDR, i2c_array, sizeof(i2c_array));
+    #else
+    NRF_LOG_INFO("MCP23008_PA_write addr(%02x)", PA_MODULE_I2C_ADDR);
+    NRF_LOG_HEXDUMP_INFO(i2c_array, sizeof(i2c_array));
+    switch (reg) {
+        case MCP23008_REG_IODIR:
+            i2c_array[0] = mcp23008_pa.iodir;
+            break;
+        
+        case MCP23008_REG_GPIO:
+            i2c_array[0] = mcp23008_pa.gpio;
+            break;
+    }
+    #endif
+
+    return i2c_array[0];
+}
+
+/* 
+ * Read MCP23008(PA)'s GPIO or IODIR
+ * - if want to get PA7~0's GPIO status
+ *      i2c addr = [26h]
+ *      i2c tx   = [09]
+ * - if want to set PA7~0's IODIR status
+ *      i2c addr = [26h]
+ *      i2c tx   = [00]
+ */
+static uint8_t MCP23008_PA_read(enum mcp23008_reg_name_e reg)
+{
+    uint8_t i2c_array[1] = {reg};
+
+    #if(CC2650_CODE)
+    i2c0_write(I2C_BITRATE_400K, PA_MODULE_I2C_ADDR, i2c_array, sizeof(i2c_array));
+    #else
+    NRF_LOG_INFO("MCP23008_PA_read addr(%02x)", PA_MODULE_I2C_ADDR);
+    NRF_LOG_HEXDUMP_INFO(i2c_array, sizeof(i2c_array));
+    switch (reg) {
+        case MCP23008_REG_IODIR:
+            i2c_array[0] = mcp23008_pa.iodir;
+            break;
+        
+        case MCP23008_REG_GPIO:
+            i2c_array[0] = mcp23008_pa.gpio;
+            break;
+    }
+    #endif
+
+    return i2c_array[0];
+}
+
+/* 
+ * Write MCP23008(PB)'s GPIO or IODIR
+ * - if want to set PB7~0's GPIO = 01h
+ *      i2c addr = [23h]
+ *      i2c tx   = [09 01]
+ * - if want to set PB7~0's IODIR = 08h (PB3 is output)
+ *      i2c addr = [23h]
+ *      i2c tx   = [00 08]
+ */
+static uint8_t MCP23008_PB_write(enum mcp23008_reg_name_e reg)
+{
+    uint8_t i2c_array[2] = {reg};
+
+    switch (reg) {
+        case MCP23008_REG_IODIR:
+            i2c_array[1] = mcp23008_pb.iodir;
+            break;
+        
+        case MCP23008_REG_GPIO:
+            i2c_array[1] = mcp23008_pb.gpio;
+            break;
+    }
+
+    #if(CC2650_CODE)
+    i2c0_write(I2C_BITRATE_400K, PB_MODULE_I2C_ADDR, i2c_array, sizeof(i2c_array));
+    #else
+    NRF_LOG_INFO("MCP23008_PB_write addr(%02x)", PB_MODULE_I2C_ADDR);
+    NRF_LOG_HEXDUMP_INFO(i2c_array, sizeof(i2c_array));
+    switch (reg) {
+        case MCP23008_REG_IODIR:
+            i2c_array[0] = mcp23008_pb.iodir;
+            break;
+        
+        case MCP23008_REG_GPIO:
+            mcp23008_pb.gpio &= ~(1 << 6);
+            i2c_array[0] = mcp23008_pb.gpio;
+            break;
+    }
+    #endif
+
+    return i2c_array[0];
+}
+
+/* 
+ * Read MCP23008(PB)'s GPIO or IODIR
+ * - if want to get PB7~0's GPIO status
+ *      i2c addr = [23h]
+ *      i2c tx   = [09]
+ * - if want to set PB7~0's IODIR status
+ *      i2c addr = [23h]
+ *      i2c tx   = [00]
+ */
+static uint8_t MCP23008_PB_read(enum mcp23008_reg_name_e reg)
+{
+    uint8_t i2c_array[1] = {reg};
+
+    #if(CC2650_CODE)
+    i2c0_write(I2C_BITRATE_400K, PB_MODULE_I2C_ADDR, i2c_array, sizeof(i2c_array));
+    #else
+    NRF_LOG_INFO("MCP23008_PB_read addr(%02x)", PB_MODULE_I2C_ADDR);
+    NRF_LOG_HEXDUMP_INFO(i2c_array, sizeof(i2c_array));
+    switch (reg) {
+        case MCP23008_REG_IODIR:
+            i2c_array[0] = mcp23008_pa.iodir;
+            break;
+        
+        case MCP23008_REG_GPIO:
+            i2c_array[0] = mcp23008_pa.gpio;
+            break;
+    }
+    #endif
+
+    return i2c_array[0];
+}
+
+/** 
+    @brief Get MCP23008 PA's register value:[IODIR、GPIO]
+    @param  reg_value[2]    reg_value[0] = P7-P0 IODIR
+                            reg_value[1] = P7-P0 GPIO 
+*/
+static void get_MCP23008_PA_reg_value(uint8_t *reg_value)
+{
+    reg_value[0] = MCP23008_PA_read(MCP23008_REG_IODIR);
+    reg_value[1] = MCP23008_PA_read(MCP23008_REG_GPIO);
+}
+
+/** 
+    @brief Get MCP23008 PB's register value:[IODIR、GPIO]
+    @param  reg_value[2]    reg_value[0] = P7-P0 IODIR
+                            reg_value[1] = P7-P0 GPIO 
+*/
+static void get_MCP23008_PB_reg_value(uint8_t *reg_value)
+{
+    reg_value[0] = MCP23008_PB_read(MCP23008_REG_IODIR);
+    reg_value[1] = MCP23008_PB_read(MCP23008_REG_GPIO);
+}
+
+/** 
+    @brief Set MCP23008 to default value:
+    @brief - SW_EN、APHP_EN、/WP、OSWPIN3、OSWHN、SWRST are high, other is low
+    @brief - SW_SEN、Vlogic_EN、INT9466 are input, other is output
+*/
+void MCP23008_to_default(void)
+{
+    mcp23008_pb.gpio = 0b00100010; //SW_EN、APHP_EN high
+    MCP23008_PB_write(MCP23008_REG_GPIO);
+
+    mcp23008_pb.iodir = 0b01011000; //SW_SEN、Vlogic_EN、INT9466 input
+    MCP23008_PB_write(MCP23008_REG_IODIR);
+
+    mcp23008_pa.gpio = 0b01110100; // /WP、OSWPIN3、OSWHN、SWRST high
+    MCP23008_PA_write(MCP23008_REG_GPIO);
+
+    mcp23008_pa.iodir = 0b00000000; //all output
+    MCP23008_PA_write(MCP23008_REG_IODIR);
+}
+
+
+/********************** get PA GPIO **********************/
+#define dioPA7  7
+#define dioPA6  6
+#define dioPA5  5
+#define dioPA4  4
+#define dioPA3  3
+#define dioPA2  2
+#define dioPA1  1
+#define dioPA0  0
+void set_pin_SWRST(bool boolflag)
+{
+    if ((mcp23008_pa.gpio & 1 << dioPA2) >> dioPA2 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_SWRST_PA2 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_SWRST_PA2(%d)", boolflag);
+    #endif
+    mcp23008_pa.gpio &= ~(1 << dioPA2);
+    mcp23008_pa.gpio |= boolflag << dioPA2;
+    MCP23008_PA_write(MCP23008_REG_GPIO);
+}
+
+void set_pin_OSWHP(bool boolflag)
+{
+    if ((mcp23008_pa.gpio & 1 << dioPA3) >> dioPA3 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_OSWHP_PA3 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_OSWHP_PA3(%d)", boolflag);
+    #endif
+    mcp23008_pa.gpio &= ~(1 << dioPA3);
+    mcp23008_pa.gpio |= boolflag << dioPA3;
+    MCP23008_PA_write(MCP23008_REG_GPIO);
+}
+
+void set_pin_OSWHN(bool boolflag)
+{
+    if ((mcp23008_pa.gpio & 1 << dioPA4) >> dioPA4 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_OSWHN_PA4 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_OSWHN_PA4(%d)", boolflag);
+    #endif
+    mcp23008_pa.gpio &= ~(1<<dioPA4);
+    mcp23008_pa.gpio |= boolflag << dioPA4;
+    MCP23008_PA_write(MCP23008_REG_GPIO);
+}
+
+void set_pin_OSWPIN3(bool boolflag)
+{
+    if ((mcp23008_pa.gpio & 1 << dioPA5) >> dioPA5 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_OSWPIN3_PA5 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_OSWPIN3_PA5(%d)", boolflag);
+    #endif
+    mcp23008_pa.gpio &= ~(1 << dioPA5);
+    mcp23008_pa.gpio |= boolflag << dioPA5;
+    MCP23008_PA_write(MCP23008_REG_GPIO);
+}
+
+void set_pin_WP(bool boolflag)
+{
+    if ((mcp23008_pa.gpio & 1 << dioPA6) >> dioPA6 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_WP_PA6 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_WP_PA6(%d)", boolflag);
+    #endif
+    mcp23008_pa.gpio &= ~(1 << dioPA6);
+    mcp23008_pa.gpio |= boolflag << dioPA6;
+    MCP23008_PA_write(MCP23008_REG_GPIO);
+}
+
+
+/********************** get PB GPIO **********************/
+#define dioPB7  7
+#define dioPB6  6
+#define dioPB5  5
+#define dioPB4  4
+#define dioPB3  3
+#define dioPB2  2
+#define dioPB1  1
+#define dioPB0  0
+void set_pin_APHP_EN(bool boolflag)
+{
+    if ((mcp23008_pb.gpio & 1 << dioPB0) >> dioPB0 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_APHP_EN_PB0 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_APHP_EN_PB0(%d)", boolflag);
+    #endif
+    mcp23008_pb.gpio &= ~(1 << dioPB0);
+    mcp23008_pb.gpio |= boolflag << dioPB0;
+    MCP23008_PB_write(MCP23008_REG_GPIO);
+}
+
+void set_pin_APHP_EN_neg(bool boolflag)
+{
+    if ((mcp23008_pb.gpio & 1 << dioPB1) >> dioPB1 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_APHP_EN_neg_PB1 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_APHP_EN_neg_PB1(%d)", boolflag);
+    #endif
+    mcp23008_pb.gpio &= ~(1 << dioPB1);
+    mcp23008_pb.gpio |= boolflag << dioPB1;
+    MCP23008_PB_write(MCP23008_REG_GPIO);
+}
+
+void set_pin_INT9466(bool boolflag)
+{
+    if ((mcp23008_pb.gpio & 1 << dioPB3) >> dioPB3 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_INT9466_PB3 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_INT9466_PB3(%d)", boolflag);
+    #endif
+    mcp23008_pb.gpio &= ~(1 << dioPB3);
+    mcp23008_pb.gpio |= boolflag << dioPB3;
+    MCP23008_PB_write(MCP23008_REG_GPIO);
+}
+
+void set_pin_Vlogic_EN(bool boolflag) // 'Vlogic_EN' or 'Power_EN'
+{
+    if ((mcp23008_pb.gpio & 1 << dioPB4) >> dioPB4 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_Vlogic_EN_PB4 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_Vlogic_EN_PB4(%d)", boolflag);
+    #endif
+    mcp23008_pb.gpio &= ~(1 << dioPB4);
+    mcp23008_pb.gpio |= boolflag << dioPB4;
+    MCP23008_PB_write(MCP23008_REG_GPIO);
+}
+
+void set_pin_SW_EN(bool boolflag)
+{
+    if ((mcp23008_pb.gpio & 1 << dioPB5) >> dioPB5 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_SW_EN_PB5 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_SW_EN_PB5(%d)", boolflag);
+    #endif
+    mcp23008_pb.gpio &= ~(1 << dioPB5);
+    mcp23008_pb.gpio |= boolflag << dioPB5;
+    MCP23008_PB_write(MCP23008_REG_GPIO);
+}
+
+void set_pin_SW_SEN(bool boolflag)
+{
+    if ((mcp23008_pb.gpio & 1 << dioPB6) >> dioPB6 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_SW_SEN_PB6 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_SW_SEN_PB6(%d)", boolflag);
+    #endif
+    mcp23008_pb.gpio &= ~(1 << dioPB6);
+    mcp23008_pb.gpio |= boolflag << dioPB6;
+    MCP23008_PB_write(MCP23008_REG_GPIO);
+}
+
+void set_pin_Shutdown(bool boolflag) // 'Shutdown' or 'shut_down'
+{
+    if ((mcp23008_pb.gpio & 1 << dioPB7) >> dioPB7 == boolflag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_Shutdown_PB7 same signal(%d)", boolflag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_Shutdown_PB7(%d)", boolflag);
+    #endif
+    mcp23008_pb.gpio &= ~(1 << dioPB7);
+    mcp23008_pb.gpio |= boolflag << dioPB7;
+    MCP23008_PB_write(MCP23008_REG_GPIO);
+}
+
+
+/********************** get GPIO **********************/
+bool get_pin_SW_SEN(void)
+{
+    uint8_t gpio_reg_value;
+
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("get_pin_SW_SEN");
+    #endif
+    gpio_reg_value = MCP23008_PB_read(MCP23008_REG_GPIO);
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("SW_SEN=(%d)", (gpio_reg_value & 1 << dioPB6) >> dioPB6);
+    #endif
+
+    return (gpio_reg_value & 1 << dioPB6) >> dioPB6;
+}
+
+bool get_pin_INT9466(void)
+{
+    uint8_t gpio_reg_value;
+
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("get_pin_INT9466")
+    #endif
+    gpio_reg_value = MCP23008_PB_read(MCP23008_REG_GPIO);
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("INT9466=(%d)", (gpio_reg_value & 1 << dioPB3) >> dioPB3);
+    #endif
+
+    return (gpio_reg_value & 1 << dioPB3) >> dioPB3;
+}
+
+
+/********************** get IODIR **********************/
+/** 
+    @brief Set IODIR of Vlogic_EN pin. ['Vlogic_EN' or 'Power_EN']
+    @param in_out_flag SET_OUTPUT / SET_INPUT 
+*/
+void set_pin_Vlogic_EN_iodir(uint8_t in_out_flag)
+{
+    if ((mcp23008_pb.iodir & 1 << dioPB4) >> dioPB4 == in_out_flag) {
+        #if(!CC2650_CODE)
+        NRF_LOG_INFO("set_pin_Vlogic_EN_iodir same signal(%d)", in_out_flag);
+        #endif
+        return;
+    }
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_pin_Vlogic_EN_iodir(%d)", in_out_flag);
+    #endif
+    mcp23008_pb.iodir &= ~(1 << dioPB4);
+    mcp23008_pb.iodir |= in_out_flag << dioPB4;
+    MCP23008_PB_write(MCP23008_REG_IODIR);
+}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/HAL/MCP45HV51x2.h

@@ -0,0 +1,138 @@
+#include <stdint.h>
+#include <math.h>
+#include "app_config.h"
+
+#if(!CC2650_CODE)
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+#endif
+
+#define U303_MODULE_I2C_ADDR    0x3C
+#define U304_MODULE_I2C_ADDR    0x3D
+
+#define DEVICE_MEMORY_ADDR_WIPER0   0x00
+#define DEVICE_MEMORY_ADDR_TCON     0x04
+
+#define CMD_WRITE_DATA  0x00
+#define CMD_INCREMENT   0x01
+#define CMD_DECREMENT   0x10
+#define CMD_READ_DATA   0x11
+
+/** 
+    @brief Write MCP45HV51(U303)
+    @param device_memory_addr DEVICE_MEMORY_ADDR_WIPER0 / DEVICE_MEMORY_ADDR_TCON
+    @param rw_command CMD_WRITE_DATA / CMD_INCREMENT / CMD_DECREMENT / CMD_READ_DATA
+    @param data 0x00~0xFF
+*/
+static uint8_t MCP45HV51_i2c_write_sequence(uint8_t i2c_addr, uint8_t device_memory_addr, uint8_t rw_command, uint8_t data)
+{
+    uint8_t i2c_array[2] = {0};
+
+    i2c_array[0] = device_memory_addr<<4 | rw_command<<2;
+    i2c_array[1] = data;
+
+    #if(CC2650_CODE)
+    i2c0_write(I2C_BITRATE_400K, i2c_addr, i2c_array, sizeof(i2c_array));
+    #else
+    NRF_LOG_INFO("MCP45HV51_i2c_write_sequence addr(%02x)", i2c_addr);
+    NRF_LOG_HEXDUMP_INFO(i2c_array, sizeof(i2c_array));
+    #endif
+
+    return i2c_array[0];
+}
+
+/** 
+    @brief Set +SW voltage
+    @param uv 800000 ~ 14133333uV
+    U303:
+    if data = FFh
+        - POW~POB's resistance = data * 50000 / 255  [POW~POB resistance = 0K~50K]
+          POW~POB's resistance = 50000 = 50Kohm
+        - vout = 0.8 * (POW~POB's resistance / 3Kohm + 1)
+          vout = 0.8 * (50000 / 3000 + 1)
+          vout = 14.133333V
+    So if want to get 10V:
+        - POW~POB's resistance = (10*1e6[uV] / 0.8 - 1*1e6) / 1e6 * 3000 = 34500ohm
+        - data = 34500 * 255 / 50000 = 175.95 -> 176
+*/
+void set_SW_P_voltage(int32_t uv)
+{
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_SW_P_voltage(%d)", uv);
+    #endif
+
+    if (uv <= 800000) {
+        uv = 800000;
+    } else if (uv >= 14133333) {
+        uv = 14133333;
+    }
+
+    uint8_t rx;
+    int64_t value;
+    double temp = (uv / 0.8 - 1e6) * 153 / 1e7;
+    
+    if (fmod(temp, 1.0) == 0.0) {
+        value = (int64_t)temp;
+    } else {
+        value = (int64_t)ceil(temp);
+    }
+    
+    rx = MCP45HV51_i2c_write_sequence(U303_MODULE_I2C_ADDR, DEVICE_MEMORY_ADDR_WIPER0, CMD_WRITE_DATA, (uint8_t)value);
+
+    #if(CC2650_CODE)
+    uint8_t ack_buf[20] = {0};
+    ack_buf[0] = 2;  //data len
+    ack_buf[1] = 0xB0;
+    ack_buf[2] = rx;
+    SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, ack_buf);
+    #endif
+}
+
+/** 
+    @brief Set -SW voltage
+    @param uv -600000 ~ -14236363uV
+    U304:
+    if data = FFh
+        - POW~POB's resistance = data * 50000 / 255  [POW~POB resistance = 0K~50K]
+          POW~POB's resistance = 50000 = 50Kohm
+        - vout = (POW~POB's resistance * 0.6 / 2.2Kohm + 0.6)
+          vout = (50000 * 0.6 / 2200 + 0.6)
+          vout = 14.236363V (negative voltage)
+    So if want to get 10V(negative voltage):
+        - POW~POB's resistance = (10*1e6[uV] - 0.6*1e6) * 2200 / 0.6 / 1e6 = 34466ohm
+        - data = 34466 * 255 / 50000 = 175.77 -> 176
+*/
+void set_SW_N_voltage(int32_t uv)
+{
+    #if(!CC2650_CODE)
+    NRF_LOG_INFO("set_SW_N_voltage(%d)", uv);
+    #endif
+
+    uv = uv * (-1);
+    if (uv <= 600000) {
+        uv = 600000;
+    } else if (uv >= 14236363) {
+        uv = 14236363;
+    }
+
+    uint8_t rx;
+    int64_t value;
+    double temp = (uv - 6*1e5) * 187 / 1e7;
+
+    if (fmod(temp, 1.0) == 0.0) {
+        value = (int64_t)temp;
+    } else {
+        value = (int64_t)ceil(temp);
+    }
+
+    rx = MCP45HV51_i2c_write_sequence(U304_MODULE_I2C_ADDR, DEVICE_MEMORY_ADDR_WIPER0, CMD_WRITE_DATA, (uint8_t)value);
+
+    #if(CC2650_CODE)
+    uint8_t ack_buf[20] = {0};
+    ack_buf[0] = 2;  //data len
+    ack_buf[1] = 0xB0;
+    ack_buf[2] = rx;
+    SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, ack_buf);
+    #endif
+}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/HAL/cc2650_connection_interface.h

@@ -0,0 +1,173 @@
+#include <stdint.h>
+#include <stdbool.h>
+#include "app_config.h"
+
+#if(!CC2650_CODE)
+#include "nrf_log.h"
+#include "nrf_log_ctrl.h"
+#include "nrf_log_default_backends.h"
+#else
+#include <ti/drivers/pin/PINCC26XX.h>
+#include <ti/drivers/PIN.h>
+#include <ti/drivers/I2C.h>
+#include "Board.h" // src\boards\BOOSTXL_CC2650MA\Board.h
+#endif
+
+/********************************** GPIO **********************************/
+//Assign Elite other pins
+#define E_PIN_ADCA0         DIO0
+#define E_PIN_ADCA1         DIO1
+#define E_PIN_ADCA2         DIO7
+#define E_PIN_SWCSBB        DIO2
+#define E_PIN_MEMCS         DIO3
+#define E_PIN_DACCS         DIO10
+#define E_PIN_ADCCS         DIO11
+
+#if(CC2650_CODE)
+PIN_Handle Elite_pin_handle;
+PIN_State Elite_state;
+
+void elite_pin_create(void)
+{
+    const PIN_Config elite_pin_table[] = {
+        E_PIN_ADCA0  | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX,
+        E_PIN_ADCA1  | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX,
+        E_PIN_ADCA2  | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX,
+        E_PIN_SWCSBB | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL | PIN_DRVSTR_MAX,
+        E_PIN_MEMCS  | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL | PIN_DRVSTR_MAX,
+        E_PIN_ADCCS  | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL | PIN_DRVSTR_MAX,
+        E_PIN_DACCS  | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH | PIN_PUSHPULL | PIN_DRVSTR_MAX,
+
+        PIN_TERMINATE
+    };
+
+    Elite_pin_handle = PIN_open(&Elite_state, elite_pin_table);
+}
+#endif
+
+void set_pin_ADCA0(bool boolflag)
+{
+    #if(CC2650_CODE)
+    PIN_setOutputValue(Elite_pin_handle, E_PIN_ADCA0, boolflag);
+    #else
+    NRF_LOG_INFO("set_pin_ADCA0(%d)", boolflag);
+    #endif
+}
+
+void set_pin_ADCA1(bool boolflag)
+{
+    #if(CC2650_CODE)
+    PIN_setOutputValue(Elite_pin_handle, E_PIN_ADCA1, boolflag);
+    #else
+    NRF_LOG_INFO("set_pin_ADCA1(%d)", boolflag);
+    #endif
+}
+
+void set_pin_ADCA2(bool boolflag)
+{
+    #if(CC2650_CODE)
+    PIN_setOutputValue(Elite_pin_handle, E_PIN_ADCA2, boolflag);
+    #else
+    NRF_LOG_INFO("set_pin_ADCA2(%d)", boolflag);
+    #endif
+}
+
+void set_pin_ADCCS(bool boolflag)
+{
+    #if(CC2650_CODE)
+    PIN_setOutputValue(Elite_pin_handle, E_PIN_ADCCS, boolflag);
+    #else
+    NRF_LOG_INFO("set_pin_ADCCS(%d)", boolflag);
+    #endif
+}
+
+void set_pin_DACCS(bool boolflag)
+{
+    #if(CC2650_CODE)
+    PIN_setOutputValue(Elite_pin_handle, E_PIN_DACCS, boolflag);
+    #else
+    NRF_LOG_INFO("set_pin_DACCS(%d)", boolflag);
+    #endif
+}
+
+void set_pin_SWCSBB(bool boolflag)
+{
+    #if(CC2650_CODE)
+    PIN_setOutputValue(Elite_pin_handle, E_PIN_SWCSBB, boolflag);
+    #else
+    NRF_LOG_INFO("set_pin_SWCSBB(%d)", boolflag);
+    #endif
+}
+
+void set_pin_MEMCS(bool boolflag)
+{
+    #if(CC2650_CODE)
+    PIN_setOutputValue(Elite_pin_handle, E_PIN_MEMCS, boolflag);
+    #else
+    NRF_LOG_INFO("set_pin_MEMCS(%d)", boolflag);
+    #endif
+}
+
+/*
+ * ADCA0:  0
+ * ADCA1:  0
+ * ADCA2:  0
+ * ADCCS:  1
+ * DACCS:  1
+ * SWCSBB: 1
+ * MEMCS:  1
+ */
+void set_all_pin_to_default(void)
+{
+    set_pin_ADCA0(0);
+    set_pin_ADCA1(0);
+    set_pin_ADCA2(0);
+    set_pin_ADCCS(1);
+    set_pin_DACCS(1);
+    set_pin_SWCSBB(1);
+    set_pin_MEMCS(1);
+}
+
+
+/********************************** I2C **********************************/
+/** 
+    @brief Write i2c
+    @param i2c_bit_rate I2C_BITRATE_100K / I2C_BITRATE_400K
+    @param i2c_addr i2c address
+    @param i2c_array send uint8_t array
+    @param i2c_array_len 0~255
+*/
+bool i2c0_write(uint8_t i2c_bit_rate, uint8_t i2c_addr, uint8_t *i2c_array, uint8_t i2c_array_len)
+{
+    I2C_Handle handle = NULL;
+    I2C_Params para;
+    I2C_BitRate bit_rate;
+    I2C_Transaction trans;
+    bool status;
+
+    if (i2c_bit_rate == I2C_BITRATE_100K)
+        bit_rate = I2C_100kHz;
+    else if (i2c_bit_rate == I2C_BITRATE_400K)
+        bit_rate = I2C_400kHz;
+
+    //open I2C
+    Board_initI2C();
+    I2C_Params_init(&para);
+    para.bitRate = bit_rate;
+    handle = I2C_open(Board_I2C0, &para);
+
+    //write I2C
+    trans.writeCount   = i2c_array_len;
+    trans.writeBuf     = i2c_array;
+    trans.readCount    = i2c_array_len;
+    trans.readBuf      = i2c_array;
+    trans.slaveAddress = i2c_addr;
+    status = I2C_transfer(handle, &trans); // status be true to indicate success, and false on an error.
+
+    //close I2C
+    I2C_close(handle);
+    handle = NULL;
+
+    return status;
+}
+

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/HAL/cc2650_driver/spi_ctrl.h

@@ -0,0 +1,28 @@
+#ifndef SPI_CTRL_H
+#define SPI_CTRL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif        
+
+#define POL0    0
+#define POL1    1
+#define PHA0    0
+#define PHA1    1
+
+#define SPI_CLK_12M     12000000
+#define SPI_CLK_10M     10000000
+#define SPI_CLK_4M      4000000
+
+int spi0_open(uint32_t bitRate, uint8_t polarity, uint8_t phase);
+void spi0_close(void);
+int spi0_write(uint8_t *rxBuf, uint8_t *txBuf, uint8_t len);
+
+int spi1_open(uint32_t bitRate, uint8_t polarity, uint8_t phase);
+void spi1_close(void);
+int spi1_write(uint8_t *rxBuf, uint8_t *txBuf, uint8_t len);
+
+#ifdef __cplusplus
+}
+#endif
+#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/HAL/cc2650_driver/spi_ctrl_c.h

@@ -0,0 +1,168 @@
+#include <Board.h>
+#include <ti/drivers/SPI.h>
+#include "HAL/cc2650_driver/spi_ctrl.h"
+/*
+ * Read SPI example in
+ * http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/tirtos/2_14_02_22/
+ * exports/tirtos_full_2_14_02_22/docs/doxygen/html/_s_p_i_c_c26_x_x_d_m_a_8h.html
+ * 
+ * SPI bit rate in Hz.
+ * 
+ * Maximum bit rates supported by hardware:
+ * 
+ * +---------------+-----------------+------------------+
+ * | Device Family | Slave Max (MHz) | Master Max (MHz) |
+ * +---------------+-----------------+------------------+
+ * |   MSP432P4    |     16 MHz      |	    24 MHz      |
+ * |   MSP432E4    |     10 MHz      |      60 MHz      |
+ * | CC13XX/CC26XX |      4 MHz      |      12 MHz      |
+ * |    CC32XX     |     20 MHz      |      20 MHz      |
+ * +---------------+-----------------+------------------+
+ * Please note that depending on the specific use case, the driver may not support the hardware's maximum bit rate.
+ */
+
+/* system use SPI parameters */
+static SPI_Handle spiHandle0 = NULL;
+static SPI_Params spiParams0;
+
+static SPI_Handle spiHandle1 = NULL;
+static SPI_Params spiParams1;
+
+/* Open the RTOS SPI driver */
+int spi0_open(uint32_t bitRate, uint8_t polarity, uint8_t phase)
+{
+    //ret=0 -> success
+    //   =1 -> already exists
+    //   =2 -> open fail
+    uint32_t rate = bitRate;
+    uint8_t pol = polarity;
+    uint8_t pha = phase;
+    SPI_FrameFormat frameFormat;
+
+    
+    if (spiHandle0 != NULL)
+        return 1;
+
+    if (pol == 0 && pha == 0)
+        frameFormat = SPI_POL0_PHA0;
+    else if (pol == 0 && pha == 1)
+        frameFormat = SPI_POL0_PHA1;
+    else if (pol == 1 && pha == 0)
+        frameFormat = SPI_POL1_PHA0;
+    else if (pol == 1 && pha == 1)
+        frameFormat = SPI_POL1_PHA1;
+
+    /*  Configure SPI as master */
+    Board_initSPI();
+    SPI_Params_init(&spiParams0);
+    spiParams0.bitRate = rate;
+    spiParams0.mode = SPI_MASTER;
+    spiParams0.dataSize = 8;
+    spiParams0.frameFormat = frameFormat;
+
+    /* Attempt to open SPI. */
+    spiHandle0 = SPI_open(Board_SPI0, &spiParams0);
+
+    if (spiHandle0 == NULL)
+        return 2;
+
+    return 0;
+}
+
+/* Close the RTOS SPI driver */
+void spi0_close(void)
+{
+    if (spiHandle0 != NULL)
+    {
+        SPI_close(spiHandle0);
+        spiHandle0 = NULL;
+    }
+
+    return;
+}
+
+int spi0_write(uint8_t *rxBuf, uint8_t *txBuf, uint8_t len)
+{
+    //ret=0 -> success
+    //   =1 -> fail
+
+    SPI_Transaction spi0Transaction;
+    spi0Transaction.count  = len;
+    spi0Transaction.txBuf  = txBuf;
+    spi0Transaction.arg    = NULL;
+    spi0Transaction.rxBuf  = NULL;
+
+    if (SPI_transfer(spiHandle0, &spi0Transaction) == FALSE) //TRUE->sucess, FALSE->fail
+        return 1;
+
+    return 0;
+}
+
+/* Open the RTOS SPI driver */
+int spi1_open(uint32_t bitRate, uint8_t polarity, uint8_t phase)
+{
+    //ret=0 -> success
+    //   =1 -> already exists
+    //   =2 -> open fail
+    uint32_t rate = bitRate;
+    uint8_t pol = polarity;
+    uint8_t pha = phase;
+    SPI_FrameFormat frameFormat;
+
+    Board_initSPI();
+
+    if (spiHandle1 != NULL)
+        return 1;
+
+    if (pol == 0 && pha == 0)
+        frameFormat = SPI_POL0_PHA0;
+    else if (pol == 0 && pha == 1)
+        frameFormat = SPI_POL0_PHA1;
+    else if (pol == 1 && pha == 0)
+        frameFormat = SPI_POL1_PHA0;
+    else if (pol == 1 && pha == 1)
+        frameFormat = SPI_POL1_PHA1;
+    
+    /*  Configure SPI as master */
+    SPI_Params_init(&spiParams1);
+    spiParams1.bitRate = rate;
+    spiParams1.mode = SPI_MASTER;
+    spiParams1.dataSize = 8;
+    spiParams1.frameFormat = frameFormat;
+
+    /* Attempt to open SPI. */
+    spiHandle1 = SPI_open(Board_SPI1, &spiParams1);
+
+    if (spiHandle1 == NULL)
+        return 2;
+
+    return spiHandle1 != NULL;
+}
+
+/* Close the RTOS SPI driver */
+void spi1_close(void)
+{
+    if (spiHandle1 != NULL)
+    {
+        SPI_close(spiHandle1);
+        spiHandle1 = NULL;
+    }
+
+    return;
+}
+
+int spi1_write(uint8_t *rxBuf, uint8_t *txBuf, uint8_t len)
+{
+    //ret=0 -> success
+    //   =1 -> fail
+
+    SPI_Transaction spi1Transaction;
+    spi1Transaction.count  = len;
+    spi1Transaction.txBuf  = txBuf;
+    spi1Transaction.arg    = NULL;
+    spi1Transaction.rxBuf  = rxBuf;
+    if (SPI_transfer(spiHandle1, &spi1Transaction) == FALSE) //TRUE->sucess, FALSE->fail
+        return 1;
+
+    return 0;
+}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/app_config.h

@@ -0,0 +1,98 @@
+
+#ifndef APPLICATION_CONFIG_H
+#define APPLICATION_CONFIG_H
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+/*
+ *
+ * product number: MAJOR_PRODUCT_NUMBER, MINOR_PRODUCT_NUMBER, MAJOR_VERSION_NUMBER, MINOR_VERSION_NUMBER
+ *   MAJOR_PRODUCT_NUMBER -> 0:Elite, 1:other serial
+ *   MINOR_PRODUCT_NUMBER(Elite) -> 1:legacy, 2:EDC, 3:BAT, 4:EIS, 5:TRIG, 6:MEGAFLY
+ *
+ * +------------------------+----------------------+-------------------------+----------------------+
+ * |       model name       |   hw upper board     |    hw lower board       |      device name     |
+ * +------------------------+----------------------+-------------------------+----------------------+
+ * | DEF_ELITE_EDC_14       | Elite1.4-re Jun.2019 | Elite1.4-re Jun. 2019   | "Elite-EDC"          |
+ * | DEF_ELITE_EDC_15       | Elite1.5 Dec. 2019   | Elite1.5 Dec. 2019      | "Elite-EDC"          |
+ * | DEF_ELITE_EDC_15RE     | Elite1.5 Dec. 2019   | Elite1.5-re Jan. 2021   | "Elite-EDC"          |
+ * | DEF_ELITE_EDC_15R2     | Elite1.5 Dec. 2019   | Elite1.5-r2 May. 2022   | "Elite-EDC"          |
+ * | DEF_ELITE_BAT_01       |             Elite2.0 Feb. 2022                 | "Elite-BAT"          |
+ * | DEF_ELITE_BAT_10       | BAT SMC V1.0 Aug.2022| BAT PWR V1.0 Aug. 2022  | "Elite-BAT"          |
+ * | DEF_ELITE_EIS_10       | Elite1.5 Dec. 2019   | Elite EIS1.0 Aug. 2020  | "Elite-EIS"          |
+ * | DEF_ELITE_EIS_11       | Elite1.5 Dec. 2019   | Elite EIS1.1 Feb. 2022  | "Elite-EIS"          |
+ * | DEF_ELITE_EIS_MINI_10  |             EIS MINI May. 2022                 | "Elite-EIS-MINI"     |
+ * | DEF_ELITE_TRIG_01      |            Elite TRIG01 Jan. 2021              | "Elite-TRIG"         |
+ * | DEF_ELITE_MEGAFLY_01   | Elite1.5 Dec. 2019   | Elite Megafly Sep. 2020 | "Elite-MEGAFLY"      |
+ * +------------------------+----------------------+-------------------------+----------------------+
+ * 
+ * +------------------------+----------------+----------------------+----------+
+ * |       model name       | product number | data server lib name |    UI    |
+ * +------------------------+----------------+----------------------+----------+
+ * | DEF_ELITE_EDC_14       |   0, 2, 1, 5   | Elite_EDC_1.4        | null     | -> No longer maintained
+ * | DEF_ELITE_EDC_15       |   0, 2, 1, 6   | Elite_EDC_1.5        | EliteEDC | -> No longer maintained
+ * | DEF_ELITE_EDC_15RE     |   0, 2, 1, 7   | Elite_EDC_1.5re      | EliteEDC |
+ * | DEF_ELITE_EDC_15R2     |   0, 2, 1, 8   | Elite_EDC_1.5r2      | EliteEDC |
+ * | DEF_ELITE_BAT_01       |   0, 3, 1, 0   | Elite_BAT_1.0        | EliteEDC | -> No longer maintained
+ * | DEF_ELITE_BAT_10       |   0, 3, 1, 1   | Elite_BAT_1.0        | EliteEDC |
+ * | DEF_ELITE_EIS_10       |   0, 4, 1, 0   | Elite_EIS_1.0        | EliteEIS |
+ * | DEF_ELITE_EIS_11       |   0, 4, 1, 1   | Elite_EIS_1.1        | EliteEIS |
+ * | DEF_ELITE_EIS_MINI_10  |   0, 4, 1, 2   | Elite_EIS_MINI_1.0   | EliteEIS |
+ * | DEF_ELITE_TRIG_01      |   0, 5, 1, 0   | Elite_TRIG_0.1       | null     |
+ * | DEF_ELITE_MEGAFLY_01   |   0, 6, 1, 0   | Elite_MEGAFLY_0.1    | null     | -> No longer maintained
+ * +------------------------+----------------+----------------------+----------+
+ * ps.
+ *    model name is FW engineer defined
+ *    device name is used for controller
+ */
+
+
+#define DEF_ELITE_EDC_14        0
+#define DEF_ELITE_EDC_15        1
+#define DEF_ELITE_EDC_15RE      2
+#define DEF_ELITE_EDC_15R2      3
+#define DEF_ELITE_BAT_01        4
+#define DEF_ELITE_BAT_10        5
+#define DEF_ELITE_EIS_10        6
+#define DEF_ELITE_EIS_11        7
+#define DEF_ELITE_EIS_MINI_10   8
+#define DEF_ELITE_TRIG_01       9
+#define DEF_ELITE_MEGAFLY_01    10
+#define DEF_ELITE_MAX           11
+
+// !!! define DEF_ELITE_MODEL first please !!!
+#define DEF_ELITE_MODEL    DEF_ELITE_BAT_10
+
+// model information
+#if (DEF_ELITE_MODEL == DEF_ELITE_EDC_14)
+    #error "code no support"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_EDC_15)
+    #error "code no support"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_EDC_15RE)
+    #error "code no support"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_EDC_15R2)
+    #error "code no support"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_BAT_01)
+    #error "code no support"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_BAT_10)
+    #include "app_config_BAT_10.h"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_EIS_10)
+    #error "code no support"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_EIS_11)
+    #error "code no support"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_EIS_MINI_10)
+    #error "code no support"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_TRIG_01)
+    #error "code no support"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_MEGAFLY_01)
+    #error "code no support"
+#else
+    #error "no this model"
+#endif
+
+#ifdef  __cplusplus
+}
+#endif
+#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/app_config_BAT_10.h

@@ -0,0 +1,202 @@
+#pragma once
+#ifndef BAT_10_CONF_H
+#define BAT_10_CONF_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define CC2650_CODE 1
+
+#if(!CC2650_CODE)
+//cc2650 self-defined"
+#define DIO5    5
+#define DIO6    9
+#define DIO12   12
+#define DIO13   13
+#define DIO14   14
+#define DIO8    8
+#define DIO9    9
+#define PIN_UNASSIGNED  0xFF
+#else
+/*------device infomation---------------------------------------------------*/
+#define DEVICE_NAME "Elite-BAT"
+#define MAJOR_PRODUCT_NUMBER    0
+#define MINOR_PRODUCT_NUMBER    3
+#define MAJOR_VERSION_NUMBER    1
+#define MINOR_VERSION_NUMBER    1
+#define HARDWARE_VER    {MAJOR_PRODUCT_NUMBER, MINOR_PRODUCT_NUMBER, \
+                         MAJOR_VERSION_NUMBER, MINOR_VERSION_NUMBER}
+#endif
+
+
+//Assign the Elite pins, please
+//These settings will be referenced by 'BOOSTXL_CC2650MA.h'
+#define E_PIN_LED_SPI_CLK   DIO5
+#define E_PIN_LED_SPI_SDI   DIO6
+#define E_PIN_SCLK0         DIO12
+#define E_PIN_MOSI          DIO13
+#define E_PIN_MISO          DIO14
+#define E_PIN_I2C_SCK       DIO8
+#define E_PIN_I2C_SDA       DIO9
+
+//The SPI/I2C pins assigned to CC2650 are referred to as Elite pins
+#define E_SPI0_MISO         PIN_UNASSIGNED
+#define E_SPI0_MOSI         E_PIN_LED_SPI_SDI
+#define E_SPI0_CLK          E_PIN_LED_SPI_CLK
+#define E_SPI0_CS           PIN_UNASSIGNED
+#define E_SPI1_MISO         E_PIN_MISO
+#define E_SPI1_MOSI         E_PIN_MOSI
+#define E_SPI1_CLK          E_PIN_SCLK0
+#define E_SPI1_CS           PIN_UNASSIGNED
+#define E_I2C0_SCL0         E_PIN_I2C_SCK
+#define E_I2C0_SDA0         E_PIN_I2C_SDA
+
+/* cc2650_connection_interface.c */
+#define I2C_BITRATE_100K    0
+#define I2C_BITRATE_400K    1
+
+/* ADG1408x1.c */
+//select_adc_channel() func parameter: channel
+#define ADC_CH_VHP0     0
+#define ADC_CH_VHN0     1
+#define ADC_CH_IsenHP   2
+#define ADC_CH_IsenHN   3
+#define ADC_CH_VHP12    4
+#define ADC_CH_Vdiff    5
+#define ADC_CH_VHP1     6
+#define ADC_CH_VHN1     7
+
+/* MCP23008x2.c */
+//set_pin_Vlogic_EN_iodir() func parameter: in_out_flag
+#define SET_OUTPUT      0
+#define SET_INPUT       1
+
+/* ADGS1412x9.c */
+//ADGS1412_get_one_mux() func para: component_id
+//ADGS1412_set_one_mux() func para: component_id
+#define ADGS1412_U14    0
+#define ADGS1412_U13    1
+#define ADGS1412_U18    2
+#define ADGS1412_U20    3
+#define ADGS1412_U26    4
+#define ADGS1412_U29    5
+#define ADGS1412_U22    6
+#define ADGS1412_U04    7
+#define ADGS1412_U24    8
+//ADGS1412_set_one_mux() func para: set_value
+#define ADGS1412_ALL_DIS   0b00000000
+#define ADGS1412_S1_EN     0b00000001
+#define ADGS1412_S2_EN     0b00000010
+#define ADGS1412_S3_EN     0b00000100
+#define ADGS1412_S4_EN     0b00001000
+
+/* MAX5136x2.c */
+//OUT_n_output() func parameter: out_pin
+#define DAC_OUT_0       0
+#define DAC_OUT_1       1
+#define DAC_OUT_2       2
+#define DAC_OUT_3       3
+
+/* ADS8691x1.c */
+//set_adc_input_range() fun parameter: range
+#define ADC_MEASURE_RANGE_02V_PN    0 //ADC measure range: +-2.56V        LSB:19.53uV
+#define ADC_MEASURE_RANGE_05V_PN    1 //ADC measure range: +-5.12V        LSB:39.06uV
+#define ADC_MEASURE_RANGE_06V_PN    2 //ADC measure range: +-6.144V       LSB:46.875uV
+#define ADC_MEASURE_RANGE_10V_PN    3 //ADC measure range: +-10.24V       LSB:78.125uV
+#define ADC_MEASURE_RANGE_12V_PN    4 //ADC measure range: +-12.288V      LSB:93.75uV
+
+/* pinout_ser.c */
+//pinout4_output_source() func para: pin
+//pinout1_output_source() func para: pin
+#define VOUT_VctlPIN3   0
+#define VOUT_VctlPIN2   1
+#define VOUT_VctlHN     2
+#define VOUT_VctlHP0    3
+#define VOUT_VHN_output 4
+
+/* common fomular */
+#define HIGH_BYTES_16b(_v)  (_v >> 8)
+#define LOW_BYTES_16b(_v)   (_v)
+
+#if(CC2650_CODE)
+/* cc2650_connection_interface.c */
+bool i2c0_write(uint8_t bitRate, uint8_t i2c_addr, uint8_t *i2c_array, uint8_t i2c_array_len);
+void set_pin_ADCA0(bool boolflag);
+void set_pin_ADCA1(bool boolflag);
+void set_pin_ADCA2(bool boolflag);
+void set_pin_ADCCS(bool boolflag);
+void set_pin_DACCS(bool boolflag);
+void set_pin_SWCSBB(bool boolflag);
+void set_pin_MEMCS(bool boolflag);
+void set_all_pin_to_default(void);
+
+/* ADG1408x1.c */
+void select_adc_channel(uint8_t channel);
+
+/* MCP23008x2.c */
+void MCP23008_to_default(void);
+void set_pin_SWRST(bool boolflag);
+void set_pin_OSWHP(bool boolflag);
+void set_pin_OSWHN(bool boolflag);
+void set_pin_OSWPIN3(bool boolflag);
+void set_pin_WP(bool boolflag);
+void set_pin_APHP_EN(bool boolflag);
+void set_pin_APHP_EN_neg(bool boolflag);
+void set_pin_INT9466(bool boolflag);
+void set_pin_Vlogic_EN(bool boolflag); // 'Vlogic_EN' or 'Power_EN'
+void set_pin_SW_EN(bool boolflag);
+void set_pin_SW_SEN(bool boolflag);
+void set_pin_Shutdown(bool boolflag); // 'Shutdown' or 'shut_down'
+bool get_pin_SW_SEN(void);
+bool get_pin_INT9466(void);
+void set_pin_Vlogic_EN_iodir(uint8_t in_out_flag); // 'Vlogic_EN' or 'Power_EN'
+
+/* ADGS1412x9.c */
+void ADGS1412_daisy_chain_mode(void);
+void ADGS1412_idle_conf(void);
+uint8_t ADGS1412_get_one_mux(uint8_t component_id);
+void ADGS1412_set_one_mux(uint8_t component_id, uint8_t set_value);
+
+/* MAX5136x2.c */
+void OUT_n_output(uint8_t out_pin, uint16_t dac_code);
+
+/* ADS8691x1.c */
+void ADS8691_init(void);
+int32_t get_adc_voltage_uV(void);
+uint8_t get_adc_input_range(void);
+int8_t set_adc_input_range(uint8_t range);
+
+/* MCP45HV51x2.c*/
+void set_SW_P_voltage(int32_t uv);
+void set_SW_N_voltage(int32_t uv);
+
+/* pinout_ser.c */
+int8_t pinout1_output_source(uint8_t pin);
+int8_t pinout4_output_source(uint8_t pin);
+void pinout1_volt_output(int32_t uv);
+void pinout2_volt_output(int32_t uv);
+void pinout3_volt_output(int32_t uv);
+void pinout4_volt_output(int32_t uv);
+void pinout1_output(bool boolflag);
+void pinout2_3_input_mode(void);
+void pinout2_output_mode(void);
+void pinout3_output_mode(void);
+void pinout3_connect_GND(bool boolflag);
+int32_t read_Vdiff(void);
+int32_t read_IsenHP(void);
+int32_t read_IsenHN(void);
+int32_t read_VHP0(void);
+int32_t read_VHP1(void);
+int32_t read_VHN0(void);
+int32_t read_VHN1(void);
+int32_t read_VHP12(void);
+void pinout_ser_to_default(void);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // !__ELITE_APP_CONFIG_H__

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/application/decode_instru.h

@@ -0,0 +1,797 @@
+#include <stdint.h>
+
+#include "application/pinout_ser.h"
+
+/*
+ *  MODE_DEV_TOOL 0xFF
+ *      DEV_TOOL_VERSION [34 LL FF 01]
+ * 
+ *      DEV_TOOL_BAT     [34 LL FF 02]
+ * 
+ *      DEV_TOOL_TEMP    [34 LL FF 03]
+ * 
+ *      DEV_TOOL_LED     [34 LL FF 04]
+ *          DEV_LED_LIMIT_COLOR [00 NN]
+ *          DEV_LED_DARK_COLOR  [01 RR GG BB]
+ *          DEV_LED_LIGHT_COLOR [02 RR GG BB]
+ *          DEV_LED_RAINBOW     [03]
+ * 
+ *      DEV_TOOL_SPI     [34 LL FF 20 pp RR WW ss ss ss ...]
+ *          DT_CHIP_ADC     pp = [00]
+ *          DT_CHIP_DAC     pp = [01]
+ *          DT_CHIP_MEM     pp = [02]
+ *          DT_CHIP_SWITCH  pp = [03]
+ * 
+ *      DEV_TOOL_I2C     [34 LL FF 28 qq RR WW ss ss ss ...]
+ * 
+ *      DEV_TOOL_GPIO_EDC20_ADC_CH [34 LL FF 31 cc]
+ *         cc = 07 => all open
+ *         cc = 04 => open A2
+ *         cc = 02 => open A1
+ *         cc = 01 => open A0                 
+ *
+ */
+
+
+
+enum dev_tool_para_e {
+    DEV_TOOL_VERSION        = 0x01,
+    DEV_TOOL_BAT            = 0x02,
+    DEV_TOOL_TEMP           = 0x03,
+    DEV_TOOL_LED            = 0x04,
+    DEV_TOOL_SPI            = 0x20,
+    DEV_TOOL_I2C            = 0x28,
+    DEV_TOOL_GPIO_EDC20_ADC_CH = 0x31,
+    DEV_TOOL_OUT0_WRITE_THROUGH = 0x50,
+    DEV_TOOL_SWITCH_SELECT = 0x60,
+};
+
+enum dev_tool_chip_e {
+    DT_CHIP_ADC             = 0,
+    DT_CHIP_DAC,
+    DT_CHIP_MEM,
+    DT_CHIP_SWITCH,
+    DT_OPEN_SPI1            = 0x11,
+
+    DT_CHIP_MAX,
+};
+
+enum dev_led_item_e {
+  DEV_LED_LIMIT_COLOR       = 0,
+  DEV_LED_DARK_COLOR,
+  DEV_LED_LIGHT_COLOR,
+  DEV_LED_RAINBOW,
+  DEV_LED_LV0_COLOR,
+
+  DEV_LED_MAX,
+};
+
+// RIS (real instruction)
+enum all_mode_e {
+    MODE_DEV_TOOL                  =  0xFF, // Dev Mode
+};
+
+// CIS (control instruction)
+#define CIS_VERSION                     0x40
+#define CIS_VOLT                        0x10
+#define CIS_TEMPERATURE                 0x80
+
+static void dev_tool_version()
+{
+    uint8_t cis_buf[BLE_CIS_BUFF_SIZE] = {0};
+    cis_buf[0] = 6; //data len
+    cis_buf[1] = DEV_TOOL_VERSION;
+    cis_buf[2] = VERSION_DATE_YEAR;
+    cis_buf[3] = VERSION_DATE_MONTH;
+    cis_buf[4] = VERSION_DATE_DAY;
+    cis_buf[5] = VERSION_DATE_HOUR;
+    cis_buf[6] = VERSION_DATE_MINUTE;
+    SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, cis_buf);
+}
+
+static void dev_tool_battery()
+{
+    uint8_t cis_buf[BLE_CIS_BUFF_SIZE] = {0};    
+    cis_buf[0] = 5;  //data len
+    cis_buf[1] = DEV_TOOL_BAT;
+    SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, cis_buf);
+}
+
+static void dev_tool_temp()
+{
+    uint8_t cis_buf[BLE_CIS_BUFF_SIZE] = {0};
+    cis_buf[0] = 5; //data len
+    cis_buf[1] = DEV_TOOL_TEMP;
+    SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, cis_buf);
+}
+
+static int dev_tool_led(uint8_t *ins_buf)
+{
+    uint8_t *p = ins_buf;
+    struct led_color_t led_c;
+    uint8_t led_item = p[4];
+    uint8_t c_num = p[5];
+
+    led_c.r = p[5];
+    led_c.g = p[6];
+    led_c.b = p[7];
+
+    if (led_item >= DEV_LED_MAX)
+        return -1;
+
+    if (led_item == DEV_LED_RAINBOW) //03
+        return led_rainbow(LED_BR_LV1);
+
+    if (led_item == DEV_LED_LIMIT_COLOR) //00
+        return led_color_set(LED_NB_MAX, LED_BR_LV1, (enum led_color_e)c_num);
+
+    if (led_item == DEV_LED_DARK_COLOR) //01
+        return led_color_code_set(LED_NB_MAX, LED_BR_LV1, &led_c); //0401RRGGBB
+
+    if (led_item == DEV_LED_LIGHT_COLOR) //02
+        return led_color_code_set(LED_NB_MAX, LED_BR_LV8, &led_c); //0402RRGGBB
+
+    if (led_item == DEV_LED_LV0_COLOR) //04 
+        return led_color_code_set(LED_NB_MAX, LED_BR_LV0, &led_c); //0404RRGGBB
+
+    return 0;
+}
+
+static void dev_tool_spi(uint8_t *ins_buf)
+{
+    uint8_t *p = ins_buf;
+    uint8_t chip_sel = p[4];
+    
+    //ADC、DAC、MEM、SWITCH
+    uint8_t rxlen = p[5];
+    uint8_t txlen = p[6];
+    uint8_t rx[32] = {0};
+
+    //set spi config
+    static uint8_t pol = 0;
+    static uint8_t pha = 0;
+
+    if (chip_sel >= DT_CHIP_MAX)
+        return;
+    
+    switch (chip_sel) {
+        case DT_CHIP_ADC:
+            spi1_open(SPI_CLK_4M, pol, pha);
+            set_pin_ADCCS(0);
+            spi1_write(rx, &p[7], txlen);
+            set_pin_ADCCS(1);
+            spi1_close();
+            break;
+
+        case DT_CHIP_DAC:
+            spi1_open(SPI_CLK_4M, pol, pha);
+            set_pin_DACCS(0);
+            spi1_write(rx, &p[7], txlen);
+            set_pin_DACCS(1);
+            spi1_close();
+            break;
+
+        case DT_CHIP_MEM:
+            spi1_open(SPI_CLK_4M, pol, pha);
+            set_pin_MEMCS(0);
+            spi1_write(rx, &p[7], txlen);
+            set_pin_MEMCS(1);
+            spi1_close();
+            break;
+
+        case DT_CHIP_SWITCH:
+            spi1_open(SPI_CLK_4M, pol, pha);
+            set_pin_SWCSBB(0);
+            spi1_write(rx, &p[7], txlen);
+            set_pin_SWCSBB(1);
+            spi1_close();
+            break;
+
+        case DT_OPEN_SPI1:
+            pol = p[5] >> 4;
+            pha = p[5] & 0X0F;
+            break;
+
+    }
+
+    uint8_t cis_buf[BLE_CIS_BUFF_SIZE] = {0};    cis_buf[0] = rxlen + 1;  //data len
+    cis_buf[1] = DEV_TOOL_SPI;
+    memcpy(&cis_buf[2], rx, rxlen);
+    SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, cis_buf);
+
+}
+
+static void dev_tool_i2c(uint8_t *ins_buf)
+{
+    uint8_t *p = ins_buf;
+    uint8_t i2c_addr = p[4] >> 1;
+    uint8_t ret_i2c_len = p[5];
+    uint8_t i2c_array_len = p[6];
+    uint8_t i2c_array[20];
+
+    memcpy(i2c_array, &p[7], i2c_array_len);
+
+    i2c0_write(I2C_BITRATE_400K, i2c_addr, i2c_array, i2c_array_len);
+
+    uint8_t cis_buf[BLE_CIS_BUFF_SIZE] = {0};
+    cis_buf[0] = ret_i2c_len + 2;  //data len
+    cis_buf[1] = DEV_TOOL_I2C;
+    memcpy(&cis_buf[2], i2c_array, ret_i2c_len);
+    SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, cis_buf);
+}
+
+static void dev_tool_gpio_edc20_adc_ch(uint8_t *ins_buf)
+{
+    uint8_t *p = ins_buf;
+    uint8_t adc_selector = p[4];
+    
+    select_adc_channel(adc_selector);
+
+    uint8_t cis_buf[BLE_CIS_BUFF_SIZE] = {0};    
+    cis_buf[0] = 2;  //data len
+    cis_buf[1] = DEV_TOOL_GPIO_EDC20_ADC_CH;
+    cis_buf[2] = adc_selector;
+    SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, cis_buf);
+}
+
+static void set_pinout2_and_pinout3_as_input(void)
+{
+    Vdiff_gain(0);
+    Vdiff_input_resis_route(LOAD_RESIS);
+    pinout2_3_input_mode();
+}
+
+
+/*
+ * reset power control
+ */
+static void ADS8691_reset_power_control(void)
+{
+    uint8_t RST_PWRCTL_REG[4] = {0xD0, 0x04, 0x69, 0x04};
+    spi1_open(SPI_CLK_4M, POL1, PHA0);
+    set_pin_ADCCS(0);
+    spi1_write(NULL, RST_PWRCTL_REG, sizeof(RST_PWRCTL_REG));
+    set_pin_ADCCS(1);
+    spi1_close();
+}
+
+/*
+ * 0x90 for test mode
+ */
+static void dev_tool_change_instruction_para_value(uint8_t *ins_buf)
+{
+    uint8_t para = ins_buf[4];
+
+    switch (para) {
+        case 0x01:
+            instru.volt_1 = (int32_t)ins_buf[5] << 24 | (int32_t)ins_buf[6] << 16 | (int32_t)ins_buf[7] << 8 | (int32_t)ins_buf[8];
+            break;
+
+        case 0x02:
+            instru.volt_4 = (int32_t)ins_buf[5] << 24 | (int32_t)ins_buf[6] << 16 | (int32_t)ins_buf[7] << 8 | (int32_t)ins_buf[8];
+            break;
+    }
+}
+
+/*******************************************************/
+
+/*
+ * 0xA0 ~ 0xA7 for developer
+ */
+static void dev_tool_control_mcp23008(uint8_t *ins_buf)
+{   
+    uint8_t pin = ins_buf[4];
+    bool signal = ins_buf[5];
+    bool ret;
+    uint8_t ack_buf[20] = {0};
+    
+    switch (pin) {
+        case 0x01:
+            set_pin_SWRST(signal);
+            break;
+
+        case 0x02:
+            set_pin_OSWHP(signal);
+            break;
+
+        case 0x03:
+            set_pin_OSWHN(signal);
+            break;
+
+        case 0x04:
+            set_pin_OSWPIN3(signal);
+            break;
+
+        case 0x05:
+            set_pin_WP(signal);
+            break;
+
+        case 0x06:
+            set_pin_APHP_EN(signal);
+            break;
+
+        case 0x07:
+            set_pin_APHP_EN_neg(signal);
+            break;
+
+        case 0x08: {
+            ret = get_pin_INT9466(); //input
+            ack_buf[0] = 2;  //data len
+            ack_buf[1] = 0xA0;
+            ack_buf[2] = ret;
+            SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, ack_buf);
+            break;
+        }
+
+        case 0x09:
+            set_pin_Vlogic_EN(signal);
+            break;
+
+        case 0x0A:
+            set_pin_SW_EN(signal);
+            break;
+
+        case 0x0B: {
+            ret = get_pin_SW_SEN(); //input
+            ack_buf[0] = 2;  //data len
+            ack_buf[1] = 0xA0;
+            ack_buf[2] = ret;
+            SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, ack_buf);
+            break;
+        }
+
+        case 0x0C:
+            set_pin_Shutdown(signal);
+            break;
+    }
+}
+
+static void dev_tool_select_adc_channel(uint8_t *ins_buf)
+{
+    uint8_t channel = ins_buf[4];
+
+    switch (channel) {
+        case 0x01:
+            select_adc_channel(ADC_CH_VHP0);
+            break;
+
+        case 0x02:
+            select_adc_channel(ADC_CH_VHN0);
+            break;
+
+        case 0x03:
+            select_adc_channel(ADC_CH_IsenHP);
+            break;
+
+        case 0x04:
+            select_adc_channel(ADC_CH_IsenHN);
+            break;
+            
+        case 0x05:
+            select_adc_channel(ADC_CH_VHP12);
+            break;
+            
+        case 0x06:
+            select_adc_channel(ADC_CH_Vdiff);
+            break;
+            
+        case 0x07:
+            select_adc_channel(ADC_CH_VHP1);
+            break;
+            
+        case 0x08:
+            select_adc_channel(ADC_CH_VHN1);
+            break;
+    }
+}
+
+static void dev_tool_set_adc_input_range(uint8_t *ins_buf)
+{
+    uint8_t ret;
+    uint8_t ack_buf[20] = {0};
+
+    switch (ins_buf[4]) {
+        case 0xFF:
+            ret = get_adc_input_range();
+            ack_buf[0] = 2;  //data len
+            ack_buf[1] = 0xA2;
+            ack_buf[2] = ret;
+            SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, ack_buf);
+            break;
+
+        case 0x01:
+            set_adc_input_range(ADC_MEASURE_RANGE_02V_PN);
+            break;
+
+        case 0x02:
+            set_adc_input_range(ADC_MEASURE_RANGE_05V_PN);
+            break;
+
+        case 0x03:
+            set_adc_input_range(ADC_MEASURE_RANGE_06V_PN);
+            break;
+
+        case 0x04:
+            set_adc_input_range(ADC_MEASURE_RANGE_10V_PN);
+            break;
+
+        case 0x05:
+            set_adc_input_range(ADC_MEASURE_RANGE_12V_PN);
+            break;
+    }
+}
+
+static void dev_tool_set_IsenHN_IsenHP_Vdiff_gain(uint8_t *ins_buf)
+{
+    uint8_t channel = ins_buf[4];
+    uint8_t gain_level = ins_buf[5];
+
+    switch (channel) {
+        case 0x01:
+            IsenHP_gain(gain_level);
+            break;
+
+        case 0x02:
+            IsenHN_gain(gain_level);
+            break;
+
+        case 0x03:
+            Vdiff_gain(gain_level);
+            break;
+    }
+}
+
+static void dev_tool_read_adc_volt(uint8_t *ins_buf)
+{
+    uint8_t channel = ins_buf[4];
+    int32_t uv = 0;
+    uint8_t ack_buf[20] = {0};
+
+    switch (channel) {
+        case 0x01:
+            uv = read_Vdiff();
+            break;
+        
+        case 0x02:
+            uv = read_IsenHP();
+            break;
+        
+        case 0x03:
+            uv = read_IsenHN();
+            break;
+        
+        case 0x04:
+            uv = read_VHP0();
+            break;
+        
+        case 0x05:
+            uv = read_VHP1();
+            break;
+        
+        case 0x06:
+            uv = read_VHN0();
+            break;
+        
+        case 0x07:
+            uv = read_VHN1();
+            break;
+        
+        case 0x08:
+            uv = read_VHP12();
+            break;
+    }
+
+    ack_buf[0] = 5;  //data len
+    ack_buf[1] = 0xA4;
+    ack_buf[2] = uv>>24;
+    ack_buf[3] = uv>>16;
+    ack_buf[4] = uv>>8;
+    ack_buf[5] = uv;
+    SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, ack_buf);
+}
+
+static void dev_tool_set_pinout_volt(uint8_t *ins_buf)
+{
+    uint8_t pinout = ins_buf[4];
+    int32_t uv = (int32_t)ins_buf[5]<<24 | (int32_t)ins_buf[6]<<16 | (int32_t)ins_buf[7]<<8 | (int32_t)ins_buf[8];
+
+    switch (pinout) {
+        case 0x01:
+            pinout1_volt_output(uv);
+            break;
+    }
+}
+
+static void dev_tool_set_one_mux(uint8_t *ins_buf)
+{
+    uint8_t component = ins_buf[4];
+    uint8_t mux_value = ins_buf[5];
+
+    ADGS1412_set_one_mux(component, mux_value);
+}
+
+static void dev_tool_read_one_mux(uint8_t *ins_buf)
+{
+    uint8_t component = ins_buf[4];
+    uint8_t mux_value;
+    uint8_t ack_buf[20] = {0};
+
+    mux_value = ADGS1412_get_one_mux(component);
+    ack_buf[0] = 2;  //data len
+    ack_buf[1] = 0xA7;
+    ack_buf[2] = mux_value;
+    SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, ack_buf);
+}
+
+/*******************************************************/
+#define ADC_CH_VHP0     0
+#define ADC_CH_VHN0     1
+#define ADC_CH_IsenHP   2
+#define ADC_CH_IsenHN   3
+#define ADC_CH_VHP12    4
+#define ADC_CH_Vdiff    5
+#define ADC_CH_VHP1     6
+#define ADC_CH_VHN1     7
+
+static uint32_t get_18bit_adc_value(void);
+static void mode_dev_tool(uint8_t *ins_buf)
+{
+    uint8_t *p = ins_buf;
+    uint8_t dev_item = p[3];
+
+    switch (dev_item) {
+        case DEV_TOOL_VERSION:
+            dev_tool_version();
+            break;
+
+        case DEV_TOOL_BAT:
+            dev_tool_battery();
+            break;
+
+        case DEV_TOOL_TEMP:
+            dev_tool_temp();
+            break;
+
+        case DEV_TOOL_LED:
+            dev_tool_led(p);
+            break;
+
+        case DEV_TOOL_SPI:
+            dev_tool_spi(p);
+            break;
+
+        case DEV_TOOL_I2C: //0x28
+            dev_tool_i2c(p);
+            break;
+
+        case DEV_TOOL_GPIO_EDC20_ADC_CH:
+            dev_tool_gpio_edc20_adc_ch(p);
+            break;
+
+        /*
+         * 0x90 for test mode
+         */
+        case 0x90:
+            dev_tool_change_instruction_para_value(p);
+            break;
+        /*******************************************************/
+
+        /*
+         * 0xA0 ~ 0xA7 for developer
+         */
+        case 0xA0:
+            dev_tool_control_mcp23008(p);
+            break;
+
+        case 0xA1:
+            dev_tool_select_adc_channel(p);
+            break;
+
+        case 0xA2:
+            dev_tool_set_adc_input_range(p);
+            break;
+
+        case 0xA3:
+            dev_tool_set_IsenHN_IsenHP_Vdiff_gain(p);
+            break;
+
+        case 0xA4:
+            dev_tool_read_adc_volt(p);
+            break;
+
+        case 0xA5:
+            dev_tool_set_pinout_volt(p);
+            break;
+
+        case 0xA6:
+            dev_tool_set_one_mux(p);
+            break;
+
+        case 0xA7:
+            dev_tool_read_one_mux(p);
+            break;
+        /*******************************************************/
+
+        default:
+            break;
+        
+    }
+
+    return;
+}
+
+#define CURVE_VO 3
+#define CURVE_SYNC_VOLT 6
+static void ins_decode_ris(uint8_t *ins_buf)
+{
+    uint8_t mode = ins_buf[2];
+
+    switch (mode) {
+        case MODE_DEV_TOOL: // 0x3000FF
+            mode_dev_tool(ins_buf);
+            break;
+
+        case CURVE_VO: // 0x300003
+            instru.eliteFxn      = CURVE_VO; //0x3000037530000103E8
+            instru.volt_1 = (((int32_t)ins_buf[3] << 8 | (int32_t)ins_buf[4]) - 25000)/5*1000; //1uV
+            instru.volt_4 = 0;
+            instru.notifyRate    = 10000 / ((uint32_t)ins_buf[7] << 8 | (uint32_t)ins_buf[8]) * 10;
+            // instru.notifyRate    = 10000;
+            turn_led(WORK_LED);
+            break;
+
+        case 0x06: // 0x300006
+            instru.eliteFxn      = CURVE_SYNC_VOLT; //0x300006
+            instru.notifyRate    = 10000 / ((uint32_t)ins_buf[7] << 8 | (uint32_t)ins_buf[8]) * 10;
+            turn_led(WORK_LED);
+            break;
+
+        case 0xE2: // change para
+            if (ins_buf[3] == 0x01) //DAC_VOLT=0x01
+                instru.volt_1 = (((int32_t)ins_buf[4] << 8 | (int32_t)ins_buf[5]) - 25000)/5*1000; //1uV
+            break;
+        
+
+        default:
+            break;
+    }
+
+}
+
+// VIS (virtual instruction)
+#define VIS_RST                         0xF0
+#define VIS_STI                         0xC0
+#define VIS_INT                         0x60
+#define VIS_DEVICE_SHINY                0x10
+#define VIS_SHINY_DIS                   0x20
+
+static void ins_decode_vis(uint8_t *ins_buf)
+{
+    uint8_t *p = ins_buf;
+    uint8_t oper = p[1];  // this is don't care in RIS
+        switch (oper) {
+        // reset all variables ( Ins = 0xC0F0)
+        case VIS_RST: {
+            instru.eliteFxn = VIS_RST;
+            reset();
+            pinout_ser_to_default();
+            break;
+        }
+
+        case VIS_STI: {
+            uint8_t not_buf[BLE_DAT_BUFF_SIZE] = {0};
+            not_buf[0] = instru.chip_id;
+
+            for(int i = 0; i < 12; i++) {
+                SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, sizeof(not_buf), not_buf);
+            }
+            PeriodicEvent = true;
+            mode_init = true;
+            break;
+        }
+
+        case VIS_INT: {
+            reset();
+            pinout_ser_to_default();
+            uint8_t not_buf[BLE_DAT_BUFF_SIZE] = {0};
+
+            not_buf[0] = instru.chip_id;
+            for (int i = 0; i < 12; i++) {
+                SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, sizeof(not_buf), not_buf);
+
+            }
+            break;
+        }
+
+        case VIS_DEVICE_SHINY: {
+            led_color_set(LED_NB_MAX, LED_BR_LV1, LED_CLR_MAGENTA);
+            break;
+        }
+
+        case VIS_SHINY_DIS: {
+            if (PeriodicEvent) {
+                turn_led(WORK_LED);
+            } else if (!PeriodicEvent) {
+                turn_led(LAST_LED);
+            }
+            break;
+        }
+
+        default: {
+            break;
+        }
+        }
+}
+
+static void ins_decode_cis(uint8_t *ins_buf)
+{
+    uint8_t *p = ins_buf;
+    uint8_t oper = p[1];  // this is don't care in RIS
+
+        switch (oper) {
+        case CIS_VERSION: {
+            uint8_t cis_buf[BLE_CIS_BUFF_SIZE] = {0};            
+            cis_buf[0] = 6; //data len
+            cis_buf[1] = CIS_VERSION;
+            cis_buf[2] = VERSION_DATE_YEAR;
+            cis_buf[3] = VERSION_DATE_MONTH;
+            cis_buf[4] = VERSION_DATE_DAY;
+            cis_buf[5] = VERSION_DATE_HOUR;
+            cis_buf[6] = VERSION_DATE_MINUTE;
+            SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, cis_buf);
+            break;
+        }
+
+        case CIS_VOLT: {
+            uint8_t cis_buf[BLE_CIS_BUFF_SIZE] = {0};
+            cis_buf[0] = 3; //data len
+            cis_buf[1] = CIS_VOLT;
+            cis_buf[2] = 0;
+            cis_buf[3] = 0;
+            SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, cis_buf);
+            break;
+        }
+
+
+
+        case CIS_TEMPERATURE: { //0x7080
+            uint8_t cis_buf[BLE_CIS_BUFF_SIZE] = {0};
+            cis_buf[0] = 5; //data len
+            cis_buf[1] = CIS_TEMPERATURE;
+            SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, cis_buf);
+            break;
+        }
+        }
+}
+
+// define BT instruction
+#define INS_TYPE_RIS                    0x30
+#define INS_TYPE_VIS                    0xC0
+#define INS_TYPE_CIS                    0x70
+
+static void decode_elite_instruction(uint8_t *ins_buf)
+{   
+    uint8_t *p = ins_buf;
+
+    uint8_t ins_type    = p[0] & 0xF0;
+    uint8_t chip_ID     = p[0] & 0x0F;
+    instru.chip_id = chip_ID;
+
+    switch (ins_type) {
+        case INS_TYPE_RIS:
+            ins_decode_ris(p);
+            break;
+
+        case INS_TYPE_VIS:
+            ins_decode_vis(p);
+            break;
+
+        case INS_TYPE_CIS:
+            ins_decode_cis(p);
+            break;
+
+        default:
+            break;
+    }
+
+}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/boards_config/elite_boards_select.h

@@ -1,141 +0,0 @@
-#ifndef ELITE_BOARDS_SELECT_H
-#define ELITE_BOARDS_SELECT_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/*
- *
- * product number: MAJOR_PRODUCT_NUMBER, MINOR_PRODUCT_NUMBER, MAJOR_VERSION_NUMBER, MINOR_VERSION_NUMBER
- * MAJOR_PRODUCT_NUMBER -> 0:Elite, 1:other serial
- * Elite:
- *      MINOR_PRODUCT_NUMBER -> 1:legacy, 2:EDC, 3:BAT, 4:EIS, 5:TRIG, 6:MEGAFLY
- *
- * +------------------------+----------------------+-------------------------+----------------+----------------------+----------------------+----------+
- * |       model name       |   hw upper board     |    hw lower board       | product number |      device name     | data server lib name |    UI    |
- * +------------------------+----------------------+-------------------------+----------------+----------------------+----------------------+----------+
- * | DEF_ELITE_EDC_1_4      | Elite1.4-re Jun.2019 | Elite1.4-re Jun. 2019   |   0, 2, 1, 5   | "Elite-EDC"          | Elite_EDC_1.4        | null     |
- * | DEF_ELITE_EDC_1_5      | Elite1.5 Dec. 2019   | Elite1.5 Dec. 2019      |   0, 2, 1, 6   | "Elite-EDC"          | Elite_EDC_1.5        | EliteEDC |
- * | DEF_ELITE_EDC_1_5_RE   | Elite1.5 Dec. 2019   | Elite1.5-re Jan. 2021   |   0, 2, 1, 7   | "Elite-EDC"          | Elite_EDC_1.5re      | EliteEDC |
- * | DEF_ELITE_EDC_1_5_R2   | Elite1.5 Dec. 2019   | Elite1.5-r2 May. 2022   |   0, 2, 1, 8   | "Elite-EDC"          | Elite_EDC_1.5r2      | EliteEDC |
- * | DEF_ELITE_BAT_1_0      |             Elite2.0 Feb. 2022                 |   0, 3, 1, 0   | "Elite-BAT"          | Elite_BAT_1.0        | EliteEDC |
- * | DEF_ELITE_EIS_1_0      | Elite1.5 Dec. 2019   | Elite EIS1.0 Aug. 2020  |   0, 4, 1, 0   | "Elite-EIS"          | Elite_EIS_1.0        | EliteEIS |
- * | DEF_ELITE_EIS_1_1      | Elite1.5 Dec. 2019   | Elite EIS1.1 Feb. 2022  |   0, 4, 1, 1   | "Elite-EIS"          | Elite_EIS_1.1        | EliteEIS |
- * | DEF_ELITE_EIS_MINI_1_0 |             EIS MINI May. 2022                 |   0, 4, 1, 2   | "Elite-EIS-MINI"     | Elite_EIS_MINI_1.0   | EliteEIS |
- * | DEF_ELITE_TRIG_0_1     |            Elite TRIG01 Jan. 2021              |   0, 5, 1, 0   | "Elite-TRIG"         | Elite_TRIG_0.1       | null     |
- * | DEF_ELITE_MEGAFLY_0_1  | Elite1.5 Dec. 2019   | Elite Megafly Sep. 2020 |   0, 6, 1, 0   | "Elite-MEGAFLY"      | Elite_MEGAFLY_0.1    | null     |
- * +------------------------+----------------------+-------------------------+----------------+----------------------+----------------------+----------+
- * ps.
- *    model name is FW engineer defined
- *    device name is used for controller
- */
-
-
-#define DEF_ELITE_EDC_1_4       0
-#define DEF_ELITE_EDC_1_5       1
-#define DEF_ELITE_EDC_1_5_RE    2
-#define DEF_ELITE_EDC_1_5_R2    3
-#define DEF_ELITE_BAT_1_0       4
-#define DEF_ELITE_EIS_1_0       5
-#define DEF_ELITE_EIS_1_1       6
-#define DEF_ELITE_EIS_MINI_1_0  7
-#define DEF_ELITE_TRIG_0_1      8
-#define DEF_ELITE_MEGAFLY_0_1   9
-#define DEF_ELITE_MAX           10
-
-#define DEF_ELITE_MODEL    DEF_ELITE_EDC_1_5_RE
-#ifndef DEF_ELITE_MODEL
-#error "DEF_ELITE_MODEL not defined"
-#endif
-
-#if (DEF_ELITE_MODEL == DEF_ELITE_EDC_1_4)
-    #error "code no support"    // need fix
-#elif (DEF_ELITE_MODEL == DEF_ELITE_EDC_1_5)
-    #error "code no support"    // need fix
-#elif (DEF_ELITE_MODEL == DEF_ELITE_EDC_1_5_RE)
-    #include "boards_config/pin_def_edc15re.h"
-#elif (DEF_ELITE_MODEL == DEF_ELITE_EDC_1_5_R2)
-    #error "code no support"    // need fix
-#elif (DEF_ELITE_MODEL == DEF_ELITE_EIS_1_0)
-    #error "code no support"    // need fix
-#elif (DEF_ELITE_MODEL == DEF_ELITE_EIS_1_1)
-    #include "boards_config/pin_def_eis11.h"
-#elif (DEF_ELITE_MODEL == DEF_ELITE_BAT_1_0)
-    #error "code no support"    // need fix
-#elif (DEF_ELITE_MODEL == DEF_ELITE_MEGAFLY_0_1)
-    #error "code no support"    // need fix
-#elif (DEF_ELITE_MODEL == DEF_ELITE_TRIG_0_1)
-    #error "code no support"    // need fix
-#else
-    #error "no this model"
-#endif
-
-
-// model information
-#if (DEF_ELITE_MODEL == DEF_ELITE_EDC_1_4)
-    #define DEVICE_NAME             "Elite-EDC"
-    #define MAJOR_PRODUCT_NUMBER    0
-    #define MINOR_PRODUCT_NUMBER    2
-    #define MAJOR_VERSION_NUMBER    1
-    #define MINOR_VERSION_NUMBER    5
-#elif (DEF_ELITE_MODEL == DEF_ELITE_EDC_1_5)
-    #define DEVICE_NAME             "Elite-EDC"
-    #define MAJOR_PRODUCT_NUMBER    0
-    #define MINOR_PRODUCT_NUMBER    2
-    #define MAJOR_VERSION_NUMBER    1
-    #define MINOR_VERSION_NUMBER    6
-#elif (DEF_ELITE_MODEL == DEF_ELITE_EDC_1_5_RE)
-    #define DEVICE_NAME             "Elite-EDC"
-    #define MAJOR_PRODUCT_NUMBER    0
-    #define MINOR_PRODUCT_NUMBER    2
-    #define MAJOR_VERSION_NUMBER    1
-    #define MINOR_VERSION_NUMBER    7
-#elif (DEF_ELITE_MODEL == DEF_ELITE_EDC_1_5_R2)
-    #define DEVICE_NAME             "Elite-EDC"
-    #define MAJOR_PRODUCT_NUMBER    0
-    #define MINOR_PRODUCT_NUMBER    2
-    #define MAJOR_VERSION_NUMBER    1
-    #define MINOR_VERSION_NUMBER    8
-#elif (DEF_ELITE_MODEL == DEF_ELITE_BAT_1_0)
-    #define DEVICE_NAME             "Elite-BAT"
-    #define MAJOR_PRODUCT_NUMBER    0
-    #define MINOR_PRODUCT_NUMBER    3
-    #define MAJOR_VERSION_NUMBER    1
-    #define MINOR_VERSION_NUMBER    0
-#elif (DEF_ELITE_MODEL == DEF_ELITE_EIS_1_0)
-    #define DEVICE_NAME             "Elite-EIS"
-    #define MAJOR_PRODUCT_NUMBER    0
-    #define MINOR_PRODUCT_NUMBER    4
-    #define MAJOR_VERSION_NUMBER    1
-    #define MINOR_VERSION_NUMBER    0
-#elif (DEF_ELITE_MODEL == DEF_ELITE_EIS_1_1)
-    #define DEVICE_NAME             "Elite-EIS"
-    #define MAJOR_PRODUCT_NUMBER    0
-    #define MINOR_PRODUCT_NUMBER    4
-    #define MAJOR_VERSION_NUMBER    1
-    #define MINOR_VERSION_NUMBER    1
-#elif (DEF_ELITE_MODEL == DEF_ELITE_EIS_MINI_1_0)
-    #define DEVICE_NAME             "Elite-EIS"
-    #define MAJOR_PRODUCT_NUMBER    0
-    #define MINOR_PRODUCT_NUMBER    4
-    #define MAJOR_VERSION_NUMBER    1
-    #define MINOR_VERSION_NUMBER    2
-#elif (DEF_ELITE_MODEL == DEF_ELITE_TRIG_0_1)
-    #define DEVICE_NAME             "Elite-TRIG"
-    #define MAJOR_PRODUCT_NUMBER    0
-    #define MINOR_PRODUCT_NUMBER    5
-    #define MAJOR_VERSION_NUMBER    1
-    #define MINOR_VERSION_NUMBER    0
-#elif (DEF_ELITE_MODEL == DEF_ELITE_MEGAFLY_0_1)
-    #define DEVICE_NAME             "Elite-MEGAFLY"
-    #define MAJOR_PRODUCT_NUMBER    0
-    #define MINOR_PRODUCT_NUMBER    6
-    #define MAJOR_VERSION_NUMBER    1
-    #define MINOR_VERSION_NUMBER    0
-#endif
-
-#ifdef  __cplusplus
-}
-#endif
-#endif  // ELITE_BOARDS_SELECT_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/boards_config/pin_def_edc15re.h

@@ -1,63 +0,0 @@
-#ifndef PIN_DEF_EDC15RE_H
-#define PIN_DEF_EDC15RE_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * +------------------------------+
- * |          CC2650moda          |
- * +-------------+----------------+
- * | MISO        | DIO1           |
- * | D0          | DIO3           |
- * | D1          | DIO4           |
- * | D2/JTAG_TDO | DIO5/JTAG_TDO  |
- * | D3/JTAG_TDI | DIO6/JTAG_TDI  |
- * | D4          | DIO7           |
- * | D5          | DIO8           |
- * | D6          | DIO9           |
- * | D7          | DIO10          |
- * | LOAD2       | DIO11          |
- * | LOAD1       | DIO12          |
- * | LOAD0       | DIO13          |
- * | SHUT_DOWN   | DIO14          |
- * +-------------+----------------+
- */
-
-
-/* CC2650moda */
-#define E_PIN_MISO            DIO1
-#define E_PIN_D0              DIO3
-#define E_PIN_D1              DIO4
-#define E_PIN_D2              DIO5
-#define E_PIN_D3              DIO6
-#define E_PIN_D4              DIO7
-#define E_PIN_D5              DIO8
-#define E_PIN_D6              DIO9
-#define E_PIN_D7              DIO10
-
-#define E_PIN_LOAD2           DIO11
-#define E_PIN_LOAD1           DIO12
-#define E_PIN_LOAD0           DIO13
-#define E_PIN_SHUT_DOWN       DIO14     // to sense switch
-
-/* SPI Board */
-#define Board_SPI0_MISO                 PIN_UNASSIGNED
-#define Board_SPI0_MOSI                 E_PIN_D1
-#define Board_SPI0_CLK                  E_PIN_D0
-#define Board_SPI0_CS                   PIN_UNASSIGNED
-
-#define Board_SPI1_MISO                 E_PIN_MISO
-#define Board_SPI1_MOSI                 E_PIN_D3
-#define Board_SPI1_CLK                  E_PIN_D2
-#define Board_SPI1_CS                   PIN_UNASSIGNED
-
-/* I2C */ 
-#define Board_I2C0_SCL0                 PIN_UNASSIGNED
-#define Board_I2C0_SDA0                 PIN_UNASSIGNED
-
-#ifdef __cplusplus
-}
-#endif
-#endif  // PIN_DEF_EDC15RE_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/driver/gpio_edc15re.h

@@ -1,15 +0,0 @@
-#ifndef GPIO_EDC15RE_H
-#define GPIO_EDC15RE_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-uint8_t gpio_create(void);
-uint8_t add_pin_d0_d3(void);
-uint8_t remove_pin_d0_d3(void);
-
-#ifdef __cplusplus
-}
-#endif
-#endif  // GPIO_EDC15RE_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/driver/gpio_edc15re_c.h

@@ -1,89 +0,0 @@
-#include <Board.h>
-#include <ti/drivers/pin/PINCC26XX.h>
-#include "driver/gpio_edc15re.h"
-
-static PIN_Handle   PinHandle;
-static PIN_State    PinStatus;
-
-const PIN_Config BLE_IO[] = {
-    E_PIN_D0 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    E_PIN_D1 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    E_PIN_D2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    E_PIN_D3 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    E_PIN_D4 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    E_PIN_D5 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    E_PIN_D6 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    E_PIN_D7 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    E_PIN_LOAD0 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    E_PIN_LOAD1 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    E_PIN_LOAD2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-
-    E_PIN_SHUT_DOWN | PIN_INPUT_EN | PIN_PULLDOWN,
-
-    PIN_TERMINATE
-};
-
-static PIN_Handle __get_gpio_handle(void)
-{
-    return PinHandle;
-}
-
-static void __set_gpio_handle(PIN_Handle handle)
-{
-    PinHandle = handle;
-
-    return;
-}
-
-uint8_t gpio_create(void)
-{
-    PIN_Handle h;
-
-    h = PIN_open(&PinStatus, BLE_IO);
-    __set_gpio_handle(h);
-
-    if (h == NULL)
-        return 1;
-        
-    return 0;
-}
-
-uint8_t add_pin_d0_d3(void)
-{
-    PIN_Handle h = __get_gpio_handle();
-
-    PIN_add(h, E_PIN_D0 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-    PIN_add(h, E_PIN_D1 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-    PIN_add(h, E_PIN_D2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-    PIN_add(h, E_PIN_D3 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-
-    return 0;
-}
-
-uint8_t remove_pin_d0_d3(void)
-{
-    PIN_Handle h = __get_gpio_handle();
-
-    PIN_remove(h, E_PIN_D0);
-    PIN_remove(h, E_PIN_D1);
-    PIN_remove(h, E_PIN_D2);
-    PIN_remove(h, E_PIN_D3);
-
-    return 0;
-}
-
-static uint8_t pin_set(uint8_t pin, uint8_t set_value)
-{
-    /*
-     * if status = 0: success
-     * else: fail
-     */
-    uint8_t p = pin;
-    uint8_t v = set_value;
-    PIN_Status status;
-    PIN_Handle h = __get_gpio_handle();
-
-    status = PIN_setOutputValue(h, p, v);
-
-    return (uint8_t)status;
-}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/driver/spi_ctrl.h

@@ -1,27 +0,0 @@
-#ifndef SPI_CTRL_H
-#define SPI_CTRL_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#define POL0    0
-#define POL1    1
-#define PHA0    0
-#define PHA1    1
-
-#define SPI_CLK_1M      1000000
-#define SPI_CLK_4M      4000000
-
-uint8_t spi0_open(uint32_t bitRate, uint8_t polarity, uint8_t phase);
-uint8_t spi0_close(void);
-uint8_t spi0_write(uint8_t *rxBuf, uint8_t *txBuf, uint8_t len);
-
-uint8_t spi1_open(uint32_t bitRate, uint8_t polarity, uint8_t phase);
-uint8_t spi1_close(void);
-uint8_t spi1_write(uint8_t *rxBuf, uint8_t *txBuf, uint8_t len);
-
-#ifdef  __cplusplus
-}
-#endif
-#endif  // SPI_CTRL_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/driver/spi_ctrl_c.h

@@ -1,208 +0,0 @@
-#include <Board.h>
-#include <ti/drivers/SPI.h>
-#include "driver/spi_ctrl.h"
-
-#define CC2650_SPI_BITRATE_MAX  4000000     //4M
-
-static SPI_Handle SpiHandle0 = NULL;
-static SPI_Params SpiParams0;
-
-static SPI_Handle SpiHandle1 = NULL;
-static SPI_Params SpiParams1;
-
-static SPI_Handle __get_spi_handle(uint8_t spi_channel)
-{
-    uint8_t c = spi_channel;
-
-    if (c >= BOOSTXL_CC2650MA_SPICOUNT)
-        return NULL;
-
-    if (c == Board_SPI0)
-        return SpiHandle0;
-
-    if (c == Board_SPI1)
-        return SpiHandle1;
-
-    return 0;
-}
-
-static void __set_spi_handle(uint8_t spi_channel, SPI_Handle handle)
-{
-    uint8_t c = spi_channel;
-
-    if (c == Board_SPI0)
-        SpiHandle0 = handle;
-    else if (c == Board_SPI1)
-        SpiHandle1 = handle;
-
-    return;
-}
-
-static SPI_FrameFormat __get_spi_mode(uint8_t polarity, uint8_t phase)
-{
-    uint8_t pol = polarity;
-    uint8_t pha = phase;
-    SPI_FrameFormat mode;
-
-    if (pol == 0 && pha == 0)
-        mode = SPI_POL0_PHA0;
-    else if (pol == 0 && pha == 1)
-        mode = SPI_POL0_PHA1;
-    else if (pol == 1 && pha == 0)
-        mode = SPI_POL1_PHA0;
-    else if (pol == 1 && pha == 1)
-        mode = SPI_POL1_PHA1;
-
-    return mode;
-}
-
-uint8_t spi0_open(uint32_t bitRate, uint8_t polarity, uint8_t phase)
-{
-    uint32_t rate = bitRate;
-    uint8_t pol = polarity;
-    uint8_t pha = phase;
-    SPI_Handle h = __get_spi_handle(Board_SPI0);
-    SPI_Params *para = &SpiParams0;
-
-    if (rate > CC2650_SPI_BITRATE_MAX)
-        return 1;
-
-    if (pol > 1 || pha > 1)
-        return 2;
-
-    if (h != NULL)
-        return 3;
-
-    SPI_Params_init(para);
-    para->bitRate = rate;
-    para->mode = SPI_MASTER;
-    para->dataSize = 8;
-    para->frameFormat = __get_spi_mode(pol, pha);
-
-    h = SPI_open(Board_SPI0, para);
-    __set_spi_handle(Board_SPI0, h);
-
-    if (h == NULL)
-        return 4;
-
-    return 0;
-}
-
-uint8_t spi0_close(void)
-{
-    SPI_Handle h = __get_spi_handle(Board_SPI0);
-
-    if (h == NULL)
-        return 1;
-
-    SPI_close(h);
-    __set_spi_handle(Board_SPI0, NULL);
-
-    return 0;
-}
-
-uint8_t spi0_write(uint8_t *rxBuf, uint8_t *txBuf, uint8_t len)
-{
-    SPI_Handle h = __get_spi_handle(Board_SPI0);
-    SPI_Transaction spi0_tran;
-    uint8_t ret;
-
-    if (h == NULL)
-        return 1;
-
-    spi0_tran.count  = len;
-    spi0_tran.txBuf  = txBuf;
-    spi0_tran.arg    = NULL;
-    spi0_tran.rxBuf  = NULL;
-    ret = SPI_transfer(h, &spi0_tran);
-
-    if (ret == false)
-        return 2;
-
-    return 0;
-}
-
-uint8_t spi1_open(uint32_t bitRate, uint8_t polarity, uint8_t phase)
-{
-    uint32_t rate = bitRate;
-    uint8_t pol = polarity;
-    uint8_t pha = phase;
-    SPI_Handle h = __get_spi_handle(Board_SPI1);
-    SPI_Params *para = &SpiParams1;
-
-    if (rate > CC2650_SPI_BITRATE_MAX)
-        return 1;
-
-    if (pol > 1 || pha > 1)
-        return 2;
-
-    if (h != NULL)
-        return 3;
-    
-    SPI_Params_init(para);
-    para->bitRate = rate;
-    para->mode = SPI_MASTER;
-    para->dataSize = 8;
-    para->frameFormat = __get_spi_mode(pol, pha);
-
-    h = SPI_open(Board_SPI1, para);
-    __set_spi_handle(Board_SPI1, h);
-
-    if (h == NULL)
-        return 4;
-
-    return 0;
-}
-
-uint8_t spi1_close(void)
-{
-    SPI_Handle h = __get_spi_handle(Board_SPI1);
-    if (h == NULL)
-        return 1;
-
-    SPI_close(h);
-    __set_spi_handle(Board_SPI1, NULL);
-
-    return 0;
-}
-
-uint8_t spi1_write(uint8_t *rxBuf, uint8_t *txBuf, uint8_t len)
-{
-    SPI_Handle h = __get_spi_handle(Board_SPI1);
-    SPI_Transaction spi1_tran;
-    uint8_t ret;
-
-    if (h == NULL)
-        return 1;
-
-    spi1_tran.count  = len;
-    spi1_tran.txBuf  = txBuf;
-    spi1_tran.arg    = NULL;
-    spi1_tran.rxBuf  = rxBuf;
-    ret = SPI_transfer(h, &spi1_tran);
-
-    if (ret == false)
-        return 2;
-
-    return 0;
-}
-
-/* utils.c.h */
-/*
-#include <stdio.h>
-#include <stdint.h>
-
-static void ___print_hex(uint8_t* p, int len)
-{
-    // ___print_hex((uint8_t *)p, sizeof(struct led_series_data_t));
-
-    int i;
-    
-    for (i = 0; i < len; i++) {
-        printf("0x%x, ", *p++);
-    }
-    printf("\n\n");
-    
-    return;
-}
-*/

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/driver/timers.h

@@ -1,40 +0,0 @@
-#ifndef TIMERS_H
-#define TIMERS_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-//timer
-enum gptimer0_ctrl_e {
-    GPT_CTRL_START = 0,
-    GPT_CTRL_STOP,
-    GPT_CTRL_CLOSE,
-
-    GPT_CTRL_MAX,
-};
-
-void elite_gptimer_open();
-uint8_t gptimer0_ctrl(enum gptimer0_ctrl_e gpt_ctrl);
-
-
-//clock
-/***************************************************
- * Q: Why define CPU_1us = 16?
- * A:
- *   3 cycles per loop: 16 loops @ 48 Mhz ~= 1 us
- *   3 cycles * X loops / 48Mhz = 1us(ideal value)
- *   3 cycles * X loops / 48us = 1us(ideal value)
- *   X = 48 / 3 => X = 16 loops
- ***************************************************/
-#define CPU_1us     16
-#define CPU_1ms     16000
-
-void CPUdelay_us(uint32_t delay_t);
-void CPUdelay_ms(uint32_t delay_t);
-void GPT_timerIncrement();
-
-#ifdef  __cplusplus
-}
-#endif
-#endif  // TIMERS_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/driver/timers_c.h

@@ -1,90 +0,0 @@
-#include <Board.h>
-#include <ti/drivers/timer/GPTimerCC26XX.h>
-#include <xdc/runtime/Types.h>
-#include <ti/sysbios/BIOS.h>
-#include "driver/timers.h"
-#include "simple_peripheral.h"
-
-static GPTimerCC26XX_Handle gptimer_handle; // was defined static
-
-#define CLOCK_FREQ 4769  // clock freq = 0.1 ms(4800), Measured(4769)
-
-static void elite_gptimer_callback(GPTimerCC26XX_Handle handle, GPTimerCC26XX_IntMask interruptMask) {
-    elite_gptimer_task();
-
-    return;
-}
-
-void elite_gptimer_open()
-{
-    GPTimerCC26XX_Params params;
-    GPTimerCC26XX_Params_init(&params);
-    params.width          = GPT_CONFIG_16BIT;
-    params.mode           = GPT_MODE_PERIODIC_UP;
-    params.debugStallMode = GPTimerCC26XX_DEBUG_STALL_OFF;
-    gptimer_handle = GPTimerCC26XX_open(Board_GPTIMER0A, &params);
-    if (gptimer_handle == NULL) {
-        Task_exit();
-    }
-    
-    Types_FreqHz  freq;
-    BIOS_getCpuFreq(&freq);
-    GPTimerCC26XX_Value loadVal = freq.lo / 1000 - 1; //47999 = 1ms
-    loadVal = CLOCK_FREQ; //0.1ms
-    GPTimerCC26XX_setLoadValue(gptimer_handle, loadVal);
-    GPTimerCC26XX_registerInterrupt(gptimer_handle, elite_gptimer_callback, GPT_INT_TIMEOUT);
-
-    GPTimerCC26XX_start(gptimer_handle);
-
-    return;
-}
-
-uint8_t gptimer0_ctrl(enum gptimer0_ctrl_e gpt_ctrl)
-{
-    enum gptimer0_ctrl_e gc = gpt_ctrl;
-    
-    if (gc > GPT_CTRL_MAX)
-        return 1;
-
-    switch (gc) {
-        case GPT_CTRL_START:
-            GPTimerCC26XX_start(gptimer_handle);
-            break;
-        
-        case GPT_CTRL_STOP:
-            GPTimerCC26XX_stop(gptimer_handle);
-            break;
-
-        case GPT_CTRL_CLOSE:
-            GPTimerCC26XX_close(gptimer_handle);
-            break;
-    }
-
-    return 0;
-}
-
-/*******************************************************************************************/
-//clock
-void CPUdelay_us(uint32_t delay_t)
-{
-    uint32_t t = delay_t;
-
-    CPUdelay(t * CPU_1us);
-
-    return;
-}
-
-void CPUdelay_ms(uint32_t delay_t)
-{
-    uint32_t t = delay_t;
-
-    CPUdelay(t * CPU_1ms);
-
-    return;
-}
-
-
-void GPT_timerIncrement() {
-    GPT.cnt_gpt_delta = GPT.cnt_gpt - GPT.cnt_gpt0;
-    GPT.cnt_gpt0 = GPT.cnt_gpt;
-}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/elite_task/elite_GPtimer.h

@@ -1,26 +0,0 @@
-#ifndef ELITE_GPTIMER_H
-#define ELITE_GPTIMER_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-struct gptimer0_t{
-    uint32_t cnt_gpt;
-    uint32_t cnt_gpt0;
-    uint8_t  cnt_gpt_delta;
-    uint32_t cnt_adc_rate;
-    uint32_t cnt_notify_rate;
-    uint32_t cnt_v_scan_rate;
-    uint32_t cnt_lead_time;
-    uint32_t BatteryADCCounter;
-    uint32_t BatteryCheckCounter;
-    uint32_t GptimerMultiple;
-};
-
-void InitGPT();
-
-#ifdef  __cplusplus
-}
-#endif
-#endif  // ELITE_GPTIMER_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/elite_task/elite_GPtimer_c.h

@@ -1,16 +0,0 @@
-#include "elite_task/elite_GPtimer.h"
-
-void InitGPT()
-{
-    GPT.cnt_gpt = 0;
-    GPT.cnt_gpt0 = 0;
-    GPT.cnt_gpt_delta = 0;
-    GPT.cnt_adc_rate = 0;
-    GPT.cnt_notify_rate = 0;
-    GPT.cnt_v_scan_rate = 0;
-    GPT.cnt_lead_time = 0;
-    GPT.BatteryADCCounter = 0;
-    GPT.BatteryCheckCounter = 0;
-
-    return;
-}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/elite_task/elite_latch.h

@@ -1,54 +0,0 @@
-#ifndef ELITE_LATCH_H
-#define ELITE_LATCH_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define LOAD0       0
-#define LOAD1       1
-#define LOAD2       2
-#define LOAD_MAX    3
-
-#define D0      0
-#define D1      1
-#define D2      2
-#define D3      3
-#define D4      4
-#define D5      5
-#define D6      6
-#define D7      7
-#define D_MAX   8
-
-// latch 1 control
-// #define E_LATCH_LED_SCLK_A      LOAD0, D0    // not gpio
-// #define E_LATCH_LED_MOSI_A      LOAD0, D1    // not gpio
-// #define E_LATCH_SCLK            LOAD0, D2    // not gpio
-// #define E_LATCH_MOSI            LOAD0, D3    // not gpio
-#define E_LATCH_HIGH_Z          LOAD0, D4
-#define E_LATCH_CS_MEM          LOAD0, D5
-#define E_LATCH_CS_ADC          LOAD0, D6
-#define E_LATCH_CS_DAC          LOAD0, D7
-
-// latch 2 control
-#define E_LATCH_MEM_HOLD        LOAD1, D0
-#define E_LATCH_10V_ENABLE      LOAD1, D5
-#define E_LATCH_5V_ENABLE       LOAD1, D6
-
-// latch 3 control  
-#define E_LATCH_I_MID_ON        LOAD2, D0
-#define E_LATCH_I_LARGE_ON      LOAD2, D1
-#define E_LATCH_V_SMALL_ON      LOAD2, D2
-#define E_LATCH_V_MID_ON        LOAD2, D3
-#define E_LATCH_I_SMALL_ON      LOAD2, D4
-#define E_LATCH_OFF             LOAD2, D6
-#define E_LATCH_VOUT_SMALL_ON   LOAD2, D7
-
-uint8_t update_latch_stat(uint8_t latch, uint8_t dio, uint8_t value);
-uint8_t latch_single_ctrl(uint8_t latch, uint8_t dio, uint8_t value);
-uint8_t latch_multi_ctrl(void);
-
-#ifdef __cplusplus
-}
-#endif
-#endif  // ELITE_LATCH_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/elite_task/elite_latch_c.h

@@ -1,352 +0,0 @@
-#include "elite_task/elite_latch.h"
-#include "driver/gpio_edc15re.h"
-#include "driver/spi_ctrl.h"
-
-enum pin_ctrl_e {
-    PC_LOAD0_CLR    = 0,
-    PC_LOAD0_SET,
-    PC_LOAD1_CLR,
-    PC_LOAD1_SET,
-    PC_LOAD2_CLR,
-    PC_LOAD2_SET,
-    PC_D0_CLR,
-    PC_D0_SET,
-    PC_D1_CLR,
-    PC_D1_SET,
-    PC_D2_CLR,
-    PC_D2_SET,
-    PC_D3_CLR,
-    PC_D3_SET,
-    PC_D4_CLR,
-    PC_D4_SET,
-    PC_D5_CLR,
-    PC_D5_SET,
-    PC_D6_CLR,
-    PC_D6_SET,
-    PC_D7_CLR,
-    PC_D7_SET,
-    PC_MAX,
-};
-
-//d0.d1.d2.d3.d4.d5.d6.d7
-struct latch_t {
-    uint8_t d7: 1,
-            d6: 1,
-            d5: 1,
-            d4: 1,
-            d3: 1,
-            d2: 1,
-            d1: 1,
-            d0: 1;
-};
-
-static struct latch_t LH0 = {0};
-static struct latch_t LH1 = {0};
-static struct latch_t LH2 = {0};
-
-static uint8_t __pin_ctrl(uint8_t pin_control)
-{
-    uint8_t pc = pin_control;
-    int8_t st;
-
-    if (pc >= PC_MAX)
-        return 1;
-
-    switch (pc) {
-        case PC_LOAD0_CLR:
-            st = pin_set(E_PIN_LOAD0, 0);
-            break;
-
-        case PC_LOAD0_SET:
-            st = pin_set(E_PIN_LOAD0, 1);
-            break;
-
-        case PC_LOAD1_CLR:
-            st = pin_set(E_PIN_LOAD1, 0);
-            break;
-
-        case PC_LOAD1_SET:
-            st = pin_set(E_PIN_LOAD1, 1);
-            break;
-
-        case PC_LOAD2_CLR:
-            st = pin_set(E_PIN_LOAD2, 0);
-            break;
-
-        case PC_LOAD2_SET:
-            st = pin_set(E_PIN_LOAD2, 1);
-            break;
-
-        case PC_D0_CLR:
-            st = pin_set(E_PIN_D0, 0);
-            break;
-
-        case PC_D0_SET:
-            st = pin_set(E_PIN_D0, 1);
-            break;
-
-        case PC_D1_CLR:
-            st = pin_set(E_PIN_D1, 0);
-            break;
-
-        case PC_D1_SET:
-            st = pin_set(E_PIN_D1, 1);
-            break;
-
-        case PC_D2_CLR:
-            st = pin_set(E_PIN_D2, 0);
-            break;
-
-        case PC_D2_SET:
-            st = pin_set(E_PIN_D2, 1);
-            break;
-
-        case PC_D3_CLR:
-            st = pin_set(E_PIN_D3, 0);
-            break;
-
-        case PC_D3_SET:
-            st = pin_set(E_PIN_D3, 1);
-            break;
-
-        case PC_D4_CLR:
-            st = pin_set(E_PIN_D4, 0);
-            break;
-
-        case PC_D4_SET:
-            st = pin_set(E_PIN_D4, 1);
-            break;
-
-        case PC_D5_CLR:
-            st = pin_set(E_PIN_D5, 0);
-            break;
-
-        case PC_D5_SET:
-            st = pin_set(E_PIN_D5, 1);
-            break;
-
-        case PC_D6_CLR:
-            st = pin_set(E_PIN_D6, 0);
-            break;
-
-        case PC_D6_SET:
-            st = pin_set(E_PIN_D6, 1);
-            break;
-
-        case PC_D7_CLR:
-            st = pin_set(E_PIN_D7, 0);
-            break;
-
-        case PC_D7_SET:
-            st = pin_set(E_PIN_D7, 1);
-            break;
-    }
-
-    if (st)
-        return 2;
-
-    return 0;
-}
-
-static struct latch_t *__get_lh_stat(uint8_t latch)
-{
-    uint8_t lh = latch;
-
-    if (lh == LOAD0)
-        return &LH0;
-
-    if (lh == LOAD1)
-        return &LH1;
-
-    if (lh == LOAD2)
-        return &LH2;
-
-    return 0;
-}
-
-static void __latch0_set(void)
-{
-    struct latch_t *lh_p = __get_lh_stat(LOAD0);
-
-    pin_set(E_PIN_D4, lh_p->d4);
-    pin_set(E_PIN_D5, lh_p->d5);
-    pin_set(E_PIN_D6, lh_p->d6);
-    pin_set(E_PIN_D7, lh_p->d7);
-
-    return;
-}
-
-static void __latch1_set(void)
-{
-    struct latch_t *lh_p = __get_lh_stat(LOAD1);
-
-    pin_set(E_PIN_D0, lh_p->d0);
-    pin_set(E_PIN_D5, lh_p->d5);
-    pin_set(E_PIN_D6, lh_p->d6);
-
-    return;
-}
-
-static void __latch2_set(void)
-{
-    struct latch_t *lh_p = __get_lh_stat(LOAD2);
-
-    pin_set(E_PIN_D0, lh_p->d0);
-    pin_set(E_PIN_D1, lh_p->d1);
-    pin_set(E_PIN_D2, lh_p->d2);
-    pin_set(E_PIN_D3, lh_p->d3);
-    pin_set(E_PIN_D4, lh_p->d4);
-    pin_set(E_PIN_D6, lh_p->d6);
-    pin_set(E_PIN_D7, lh_p->d7);
-
-    return;
-}
-
-static uint8_t __latch0_as_gpio(void)
-{
-    __pin_ctrl(PC_LOAD0_CLR);
-
-    spi0_close();
-    spi1_close();
-
-    add_pin_d0_d3();
-
-    return 0;
-}
-
-static uint8_t __latch0_as_spi(void)
-{
-    remove_pin_d0_d3();
-
-    Board_initSPI();
-    spi0_open(SPI_CLK_1M, POL0, PHA1);  //SPI 1M: LED 
-    spi1_open(SPI_CLK_4M, POL0, PHA1);  //SPI 4M: ADC、DAC
-
-    __latch0_set();
-    __pin_ctrl(PC_LOAD0_SET);
-
-    return 0;
-}
-
-uint8_t update_latch_stat(uint8_t latch, uint8_t dio, uint8_t value)
-{
-    uint8_t lh = latch;
-    uint8_t d = dio;
-    uint8_t val = value;
-    struct latch_t *lh_p;
-
-    if (lh >= LOAD_MAX)
-        return 1;
-
-    if (d >= D_MAX)
-        return 2;
-
-    if (val != 1 && value != 0)
-        return 3;
-
-    lh_p = __get_lh_stat(lh);
-
-    switch (d) {
-        case D0:
-            lh_p->d0 = val;
-            break;
-
-        case D1:
-            lh_p->d1 = val;
-            break;
-
-        case D2:
-            lh_p->d2 = val;
-            break;
-
-        case D3:
-            lh_p->d3 = val;
-            break;
-
-        case D4:
-            lh_p->d4 = val;
-            break;
-
-        case D5:
-            lh_p->d5 = val;
-            break;
-
-        case D6:
-            lh_p->d6 = val;
-            break;
-
-        case D7:
-            lh_p->d7 = val;
-            break;
-    }
-
-    return 0;
-}
-
-uint8_t latch_single_ctrl(uint8_t latch, uint8_t dio, uint8_t value)
-{
-    // control one latch pin -> update_latch_stat -> what latch to update? -> latch?_ctrl
-    uint8_t lh = latch;
-    uint8_t d = dio;
-    uint8_t val = value;
-
-    if (lh >= LOAD_MAX)
-        return 1;
-
-    if (d >= D_MAX)
-        return 2;
-
-    if (val != 1 && value != 0)
-        return 3;
-
-    update_latch_stat(lh, d, val);
-
-    switch (lh) {
-        case LOAD0:
-            __latch0_set();
-            break;
-
-        case LOAD1:
-            __latch0_as_gpio();
-
-            __latch1_set();
-            __pin_ctrl(PC_LOAD1_SET);
-            __pin_ctrl(PC_LOAD1_CLR);
-
-            __latch0_as_spi();
-            break;
-
-        case LOAD2:
-            __latch0_as_gpio();
-
-            __latch2_set();
-            __pin_ctrl(PC_LOAD2_SET);
-            __pin_ctrl(PC_LOAD2_CLR);
-
-            __latch0_as_spi();
-            break;
-    }
-
-    return 0;
-}
-
-uint8_t latch_multi_ctrl(void)
-{
-    // control many latch pin -> update_latch_stat -> update_latch_stat -> ... -> latch_ctrl 0.1.2
-    __latch0_set();
-    __pin_ctrl(PC_LOAD0_SET);
-
-    __latch0_as_gpio();
-
-    __latch1_set();
-    __pin_ctrl(PC_LOAD1_SET);
-    __pin_ctrl(PC_LOAD1_CLR);
-
-    __latch2_set();
-    __pin_ctrl(PC_LOAD2_SET);
-    __pin_ctrl(PC_LOAD2_CLR);
-
-    __latch0_as_spi();
-
-    return 0;
-}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/hardware/DAC_MAX5136.h

@@ -1,41 +0,0 @@
-#ifndef DAC_MAX5136_H
-#define DAC_MAX5136_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#include "driver/spi_ctrl.h"
-
-#define CTRL_B_LDAC                 0x01
-#define CTRL_B_CLR                  0x02
-#define CTRL_B_POW_CTRL             0x03
-#define CTRL_B_LINEARITY            0x05
-#define CTRL_B_WRT(_d0, _d1)        (0x10 | ((_d1) << 1) | (_d0))
-#define CTRL_B_WRT_THR(_d0, _d1)    (0x30 | ((_d1) << 1) | (_d0))
-
-#define DATA_B_LDAC(_d0, _d1)           ((_d1) << 9 | (_d0) << 8)
-#define DATA_B_POW_CT(_d0, _d1, _rd)    ((_d1) << 9 | (_d0) << 8 | (_rd) << 7)
-#define DATA_B_LINE(_en)                ((_en) << 9)
-    
-#define DAC0_EN      1
-#define DAC0_DIS     0
-#define DAC1_EN      1
-#define DAC1_DIS     0
-
-#define DAC0_W_T(_v)    dac_write_through_mode(DAC0_EN, DAC1_DIS, _v);
-#define DAC0_W(_v)      dac_write_mode(DAC0_EN, DAC1_DIS, _v);
-#define DAC0_P_C(_rdy)  dac_power_control_mode(DAC0_EN, DAC1_DIS, _rdy); 
-#define DAC0_LDAC()     dac_ldac_mode(DAC0_EN, DAC1_DIS);  
-
-
-int dac_ldac_mode(uint8_t dac0_enable, uint8_t dac1_enable);
-int dac_clear_mode();
-int dac_power_control_mode(uint8_t dac0_enable, uint8_t dac1_enable, uint8_t ready_enable);
-int dac_linearity_mode(uint8_t linear_enable);
-int dac_write_mode(uint8_t dac0_enable, uint8_t dac1_enable, uint16_t volts);
-int dac_write_through_mode(uint8_t dac0_enable, uint8_t dac1_enable, uint16_t volts);
-#ifdef __cplusplus
-}
-#endif
-#endif  //DAC_MAX5136_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/hardware/DAC_MAX5136_c.h

@@ -1,110 +0,0 @@
-#include "hardware/dac_MAX5136.h"
-
-struct dac_series_data_t {
-    uint8_t control_bits;
-    uint16_t data_bits;
-}__attribute__((packed));
-
-static struct dac_series_data_t dac_series_data_g = {0};
-
-
-static int __dac_transfer(struct dac_series_data_t *sd) 
-{
-    latch_single_ctrl(E_LATCH_CS_DAC, 0); 
-
-    #define WRITE_TO_DAC(_d, _l) spi1_write(NULL, (uint8_t *)(_d), (_l))
-    WRITE_TO_DAC(sd, sizeof(struct dac_series_data_t));
-    
-    latch_single_ctrl(E_LATCH_CS_DAC, 1);
-    return 0; 
-}
-
-int dac_ldac_mode(uint8_t dac0_enable, uint8_t dac1_enable) 
-{
-    uint8_t d0 = dac0_enable;
-    uint8_t d1 = dac1_enable;
-
-    struct dac_series_data_t *sd = &dac_series_data_g;
-    sd->control_bits = CTRL_B_LDAC;
-    sd->data_bits = REVERT_2_BYTE(DATA_B_LDAC(d0, d1));
-    __dac_transfer(sd);
-
-    return 0;
-
-}
-
-
-int dac_clear_mode() 
-{
-    struct dac_series_data_t *sd = &dac_series_data_g;
-    sd->control_bits = CTRL_B_CLR;
-    __dac_transfer(sd);
-
-    return 0;
-}
-
-
-int dac_power_control_mode(uint8_t dac0_enable, uint8_t dac1_enable, uint8_t ready_enable) 
-{
-    uint8_t d0 = dac0_enable;
-    uint8_t d1 = dac1_enable;
-    uint8_t rdy_en = ready_enable;
-    struct dac_series_data_t *sd = &dac_series_data_g;
-
-    sd->control_bits = CTRL_B_POW_CTRL;
-    sd->data_bits = REVERT_2_BYTE(DATA_B_POW_CT(d0, d1, rdy_en));
-
-    __dac_transfer(sd);
-
-    return 0;
-}
-
-
-int dac_linearity_mode(uint8_t linear_enable) 
-{
-    uint8_t lin_en = linear_enable;
-    struct dac_series_data_t *sd = &dac_series_data_g;
-    
-    sd->control_bits = CTRL_B_LINEARITY;
-    sd->data_bits = REVERT_2_BYTE(DATA_B_LINE(lin_en));
-    __dac_transfer(sd);
-
-    return 0;
-}
-
-
-int dac_write_mode(uint8_t dac0_enable, uint8_t dac1_enable, uint16_t volts) 
-{
-    uint8_t d0 = dac0_enable;
-    uint8_t d1 = dac1_enable;
-    uint16_t v = volts;
-    struct dac_series_data_t *sd = &dac_series_data_g;
-
-    sd->control_bits = CTRL_B_WRT(d0, d1);
-    sd->data_bits = REVERT_2_BYTE(v);
-    __dac_transfer(sd);
-
-    return 0;
-}
-
-
-int dac_write_through_mode(uint8_t dac0_enable, uint8_t dac1_enable, uint16_t volts) 
-{
-    uint8_t d0 = dac0_enable;
-    uint8_t d1 = dac1_enable;
-    uint16_t v = volts;
-    struct dac_series_data_t *sd = &dac_series_data_g;
-
-    sd->control_bits = CTRL_B_WRT_THR(d0, d1);
-    sd->data_bits = REVERT_2_BYTE(v);
-    __dac_transfer(sd);
-    
-
-    return 0;
-}
-
-
-
-
-
-

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/hardware/adc_ads1118.h

@@ -1,67 +0,0 @@
-#ifndef DAC_ADS1118_H
-#define DAC_ADS1118_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#include "driver/spi_ctrl.h"
-
-#define ADC_CH_CURR     AIN0_GND
-#define ADC_CH_VIN      AIN1_GND
-#define ADC_CH_VOUT     AIN2_GND
-#define ADC_CH_BAT      AIN3_GND
-
-#define MEASURE_CURRENT()   read_adc_data(ADC_CH_CURR, FSR3)
-#define MEASURE_VOLT()      read_adc_data(ADC_CH_VIN, FSR3)
-#define MEASURE_DAC()       read_adc_data(ADC_CH_VOUT, FSR3)
-#define MEASURE_BATTERY()   read_adc_data(ADC_CH_BAT, FSR1)
-
-
-enum input_mux_e {
-    AIN0_AIN1   = 0x00,
-    AIN0_AIN3   = 0x01,
-    AIN1_AIN3   = 0x02,
-    AIN2_AIN3   = 0x03,
-    AIN0_GND    = 0x04,
-    AIN1_GND    = 0x05,
-    AIN2_GND    = 0x06,
-    AIN3_GND    = 0x07,
-};
-
-/*
- *             [Progrmmable gain amplifier configuration]
- *      
- * The corresponing relationship of FSRx to volt will be the form:
- *      FSRx        <->      0xXX        <->        +-    xV
- *
- *      FSR1        <->      0x00        <->        +-6.144V
- *      FSR2        <->      0x01        <->        +-4.096V   
- *      FSR3        <->      0x02        <->        +-2.408V   
- *      FSR4        <->      0x03        <->        +-1.024V   
- *      FSR5        <->      0x04        <->        +-0.512V   
- *      FSR6        <->      0x05        <->        +-0.256V   
- *      FSR7        <->      0x06        <->        +-0.256V   
- *      FSR8        <->      0x07        <->        +-0.256V   
- *    
- */
-
-
-enum gain_amplifier_e {
-    FSR1 = 0x00,
-    FSR2 = 0x01,
-    FSR3 = 0x02,
-    FSR4 = 0X03,
-    FSR5 = 0x04,
-    FSR6 = 0x05,
-    FSR7 = 0x06,
-    FSR8 = 0x07,
-};
-
-uint16_t read_adc_data(uint8_t AdcChannel, uint8_t gainAmp);
-
-
-#ifdef __cplusplus
-}
-#endif
-#endif  //ADC_ADS1118_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/hardware/adc_ads1118_c.h

@@ -1,79 +0,0 @@
-#include "hardware/adc_ads1118.h"
-
-static uint8_t spi_ADC_txbuf_l[2] = {0};
-static uint8_t spi_ADC_rxbuf_l[2] = {0};
-
-
-static void __ADC_read(uint8_t input_mux, uint8_t gAmp)
-{
-   /*
-    *   write SPI to get ADC value
-    *   [7]~[0] should always be 0b11101011, data rate is 860 sps, other is default
-    *
-    *   [15]        : SS, 0 = no effect, 1 = start work, default 0b0
-    *   [14]~[12]   : MUX[2:0], default 0b000
-    *
-    *                 [Input multiplexer configuration]
-    *         
-    *         the MUX selection will correspond to a pin pair
-    *         where the pair is positive and negative input
-    *         
-    *         MUX[2:0]          <->             (AINp, AINn)   
-    *   
-    *          000              <->       AINp is AIN0, AINn is AIN1
-    *          001              <->       AINp is AIN0, AINn is AIN3
-    *          010              <->       AINp is AIN1, AINn is AIN3                          
-    *          011              <->       AINp is AIN2, AINn is AIN3          
-    *          100              <->       AINp is AIN0, AINn is GND                           
-    *          101              <->       AINp is AIN1, AINn is GND           
-    *          110              <->       AINp is AIN2, AINn is GND                           
-    *          111              <->       AINp is AIN3, AINn is GND          
-    *
-    * 
-    * 
-    *   [11]~[9]    : PGA[2:0], default 0b010 = FSR is ±2.048
-    *   [8]         : mode, 0 = continuous, 1 = one shot, default 0b1 (Power-down and single-shot mode )
-    *
-    *   [7]~[5]     : data rate, default 0b100 = 128 SPS; 0b111 = 860 SPS
-    *   [4]         : Temperature? default 0b0 = ADC mode
-    *   [3]         : Pullup enable, default 0b1 = Pullup resistor enabled
-    *   [2]~[1]     : NOP, default 0b01
-    *   [0]         : reserved, default 0b1
-    *
-    */
-
-    uint8_t *tx = spi_ADC_txbuf_l;
-    uint8_t *rx = spi_ADC_rxbuf_l;
-    uint8_t i_mux = input_mux;
-    uint8_t ga = gAmp;
-
-
-    tx[0] = i_mux << 4 | ga << 1 | 0b10000001;
-    tx[1] = 0b11101011;
-
-    latch_single_ctrl(E_LATCH_CS_ADC, 0);
-    spi1_write(NULL, tx, 2);
-    latch_single_ctrl(E_LATCH_CS_ADC, 1);
-
-    memset(tx, 0, sizeof(tx));
-    memset(rx, 0, sizeof(rx));
-
-    latch_single_ctrl(E_LATCH_CS_ADC, 0);
-    spi1_write(rx, tx, 2);
-    latch_single_ctrl(E_LATCH_CS_ADC, 1);
-
-    return;
-}
-
-uint16_t read_adc_data(uint8_t AdcChannel, uint8_t gainAmplifier) 
-{
-    uint8_t Adc_ch = AdcChannel;
-    uint8_t gainAmp = gainAmplifier;
-    uint16_t rx;
-
-    __ADC_read(Adc_ch, gainAmp);
-
-    rx = (uint16_t)spi_ADC_rxbuf_l[0] << 8 | (uint16_t)spi_ADC_rxbuf_l[1];
-
-    return rx;
-}

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/hardware/led_APA_102.h

@@ -1,93 +0,0 @@
-#ifndef LED_APA_102_H
-#define LED_APA_102_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/*
- *  APA-102-2020-256-8A-20190612: Series data structure
- *    +-------------------+------------------------- ... -+-----------------+
- *    |  start_frame(4B)  |  led_frame(4B) *LED_TANDEM_N  |  end_frame(4B)  |
- *    +-------------------+------------------------- ... -+-----------------+
- *                       /                \
- *                     /   led_frame(4B)   \
- *                   /                      \
- *       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *      | 111 | bright  |      blue     |     green     |      red      |
- *      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- */
-
-#include "driver/spi_ctrl.h"
-
-#define DEF_LED_TANDEN_N    12
-
-#ifdef DEF_LED_TANDEN_N
-#define LED_TANDEM_N  DEF_LED_TANDEN_N
-#else
-#define LED_TANDEM_N  12
-#endif
-
-enum led_series_nb_e {
-    LED_NB_1 = 0,
-    LED_NB_2,
-    LED_NB_3,
-    LED_NB_4,
-    LED_NB_5,
-    LED_NB_6,
-    LED_NB_7,
-    LED_NB_8,
-    LED_NB_9,
-    LED_NB_10,
-    LED_NB_11,
-    LED_NB_12,
-    
-    LED_NB_MAX = LED_TANDEM_N,
-};
-
-enum led_bright_e {
-    LED_BR_LV0  = 0x00,
-    LED_BR_LV1  = 0x01,
-    LED_BR_LV8  = 0x08,
-
-    LED_BR_MAX  = 0x1F,
-};
-
-enum led_color_e {
-    LED_CLR_BLACK = 0,
-    LED_CLR_WHITE,
-    LED_CLR_RED,
-    LED_CLR_ORANGE,
-    LED_CLR_YELLOW,
-    LED_CLR_GREEN,
-    LED_CLR_CYAN,
-    LED_CLR_BLUE,
-    LED_CLR_PURPLE,
-    LED_CLR_MAGENTA,
-    LED_CLR_YELLOWGREEN,
-    LED_CLR_EMERALD,
-
-    LED_CLR_MAX,
-};
-
-struct led_color_t {
-    uint8_t b;
-    uint8_t g;
-    uint8_t r;    
-};
-
-struct led_frame_t {
-    uint8_t bright: 5,
-            rsvd: 3;
-    struct led_color_t color;
-};
-
-int led_color_set(enum led_series_nb_e led_nb, enum led_bright_e bright, enum led_color_e color);
-int led_color_code_set(enum led_series_nb_e led_nb, enum led_bright_e bright, struct led_color_t *color);
-int led_rainbow(enum led_bright_e bright);
-
-#ifdef  __cplusplus
-}
-#endif
-#endif  // LED_APA_102_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteADC.h

@@ -1,480 +0,0 @@
-/*=============================================================================
- =                          EliteADC.h                                        =
- =============================================================================*/
-#ifndef EliteADC
-#define EliteADC
-
-/* for Elite1.5-re */
-// Iin theoretical boundary <2.67, 1.89~80, 63~2600, >1900 (uA)
-#define I_GAIN_SMALL_BOUNDARY     4000  // 4    uA =     4,000,000 pA
-#define I_GAIN_MID1_BOUNDARY1     2500  // 2.5  uA =     2,500,000 pA
-#define I_GAIN_MID1_BOUNDARY2   100000  // 100  uA =   100,000,000 pA
-#define I_GAIN_MID2_BOUNDARY1    85000  // 85   uA =    85,000,000 pA
-#define I_GAIN_MID2_BOUNDARY2  2050000  // 2050 uA =     2,050,000 nA
-#define I_GAIN_LARGE_BOUNDARY  1800000  // 1800 uA =     1,800,000 nA
-
-// Vin theoretical boundary <7, 5~200, >100 (mV)
-#define VIN_GAIN_SMALL_BOUNDARY   7000  // 7    mV =     7,000,000 nV
-#define VIN_GAIN_MID1_BOUNDARY1   5000  // 5    mV =     5,000,000 nV
-#define VIN_GAIN_MID1_BOUNDARY2 290000  // 290  mV =   290,000,000 nV
-#define VIN_GAIN_LARGE_BOUNDARY 250000  // 250  mV =   250,000,000 nV
-
-/*
- * define how long damping time for automatic current stalls, to skip damping time
- * high level switch to low level has 80ms damping time (CE request that skipping 50ms)
- * 0 level switch to 1 level has 5ms damping time
- *
- */
-#define CNT_H2L_IIN_VIN_VOUT_PLOT   5   // need skip 5 * 12ms = 60ms notify data
-#define CNT_L2H_IIN_VIN_VOUT_PLOT   1   // need skip 1 * 12ms = 12ms notify data
-#define CNT_H2L_IIN_VIN_PLOT        7   // 7 * 8ms = 56ms
-#define CNT_L2H_IIN_VIN_PLOT        1   // 1 * 8ms = 8ms
-#define CNT_H2L_IT_PLOT             13  // 13 * 4ms = 52ms
-#define CNT_L2H_IT_PLOT             2   // 2 * 4ms = 8ms
-
-void IinADCGainCtrl(uint8_t IinADCLevel);
-void VinADCGainCtrl(uint8_t VinADCLevel);
-void AutoGainChangeIin(int32_t RealCurrent, uint16_t plot_type, uint16_t *no_rec_time);
-void AutoGainChangeVin(int32_t RealVin);
-
-/*=============================================================================
- =                          EliteADC.c                                        =
- =============================================================================*/
-
-static void __switch_lv0(uint8_t gain0_en, uint16_t plot, uint16_t *no_rec_cnt)
-{
-    static int16_t gain_cnt = 0;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain0_en;
-    uint16_t  pt = plot;
-
-    if (gain_en == 0)
-        return;
-
-    gain_cnt++;
-
-    if (gain_cnt > 2) {
-        instru.IinADCGainLv = I_GAIN_3M;
-        IinADCGainCtrl(instru.IinADCGainLv);
-        gain_cnt = 0;
-
-        if (pt == IIN_VIN_VOUT_PLOT)
-            *no_rec = CNT_H2L_IIN_VIN_VOUT_PLOT;
-
-        else if (pt == IIN_VIN_PLOT)
-            *no_rec = CNT_H2L_IIN_VIN_PLOT;
-
-        else if (pt == IT_PLOT)
-            *no_rec = CNT_H2L_IT_PLOT;
-        
-    }
-
-    return;
-}
-
-static void __switch_lv3(uint8_t gain3_en, uint16_t plot, uint16_t *no_rec_cnt)
-{
-    static int16_t gain_cnt = 0;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain3_en;
-
-    if (gain_en == 0)
-        return;
-
-    gain_cnt++;
-    if (gain_cnt > 2) {
-        instru.IinADCGainLv = I_GAIN_100R;
-        IinADCGainCtrl(instru.IinADCGainLv);
-        gain_cnt = 0;
-        *no_rec = 0;
-    }
-
-    return;
-}
-
-static void __large_switch_lv1(uint8_t gain1_en, uint16_t plot, uint16_t *no_rec_cnt)
-{
-    static int16_t gain_cnt = 0;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain1_en;
-    uint16_t  pt = plot;
-
-    if (gain_en == 0)
-        return;
-
-    gain_cnt++;
-
-    if (gain_cnt > 2) {
-        instru.IinADCGainLv = I_GAIN_100K;
-        IinADCGainCtrl(instru.IinADCGainLv);
-        gain_cnt = 0;
-        *no_rec = 0;
-
-        if (pt == IIN_VIN_VOUT_PLOT) 
-            *no_rec = CNT_H2L_IIN_VIN_VOUT_PLOT;
-
-        else if (pt == IIN_VIN_PLOT)
-            *no_rec = CNT_H2L_IIN_VIN_PLOT;
-
-        else if (pt == IT_PLOT)
-            *no_rec = CNT_H2L_IT_PLOT;
-
-    }
-
-    return;
-}
-
-static void __small_switch_lv1(uint8_t gain1_en, uint16_t plot, uint16_t *no_rec_cnt)
-{
-    static int16_t gain_cnt = 0;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain1_en;
-    uint16_t  pt = plot;
-
-    if (gain_en == 0)
-        return;
-
-    gain_cnt++;
-
-    if (gain_cnt > 2) {
-        instru.IinADCGainLv = I_GAIN_100K;
-        IinADCGainCtrl(instru.IinADCGainLv);
-        gain_cnt = 0;
-
-        if (pt == IIN_VIN_VOUT_PLOT)
-            *no_rec = CNT_L2H_IIN_VIN_VOUT_PLOT;
-
-        else if (pt == IIN_VIN_PLOT)
-            *no_rec = CNT_L2H_IIN_VIN_PLOT;
-
-        else if (pt == IT_PLOT)
-            *no_rec = CNT_L2H_IT_PLOT;
-
-    }
-
-    return;
-}
-
-static void __large_switch_lv2(uint8_t gain2_en, uint16_t plot, uint16_t *no_rec_cnt)
-{
-    static int16_t gain_cnt = 0;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain2_en;
-    uint16_t  pt = plot;
-
-    if (gain_en == 0)
-        return;
-
-    gain_cnt++;
-
-    if (gain_cnt > 2) {
-        instru.IinADCGainLv = I_GAIN_3K;
-        IinADCGainCtrl(instru.IinADCGainLv);
-        gain_cnt = 0;
-        *no_rec = 0;
-
-        if (pt == IIN_VIN_VOUT_PLOT)
-            *no_rec = CNT_H2L_IIN_VIN_VOUT_PLOT;
-
-        else if (pt == IIN_VIN_PLOT)
-            *no_rec = CNT_H2L_IIN_VIN_PLOT;
-
-        else if (pt == IT_PLOT)
-            *no_rec = CNT_H2L_IT_PLOT;
-
-    }
-
-    return;
-}
-
-static void __small_switch_lv2(uint8_t gain2_en, uint16_t plot, uint16_t *no_rec_cnt)
-{
-    static int16_t gain_cnt = 0;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain2_en;
-
-    if (gain_en == 0)
-        return;
-
-    gain_cnt++;
-
-    if (gain_cnt > 2) {
-        instru.IinADCGainLv = I_GAIN_3K;
-        IinADCGainCtrl(instru.IinADCGainLv);
-        gain_cnt = 0;
-        *no_rec = 0;
-    }
-
-    return;
-}
-
-void IinADCGainCtrl(uint8_t IinADCLevel)
-{
-    if (IinADCLevel>= 4)
-        return;
-    /* hardware need open before close, so don't change position*/
-    if (IinADCLevel == 0) {
-        // ADC gain level = 0, using 2M resister
-        update_latch_stat(E_LATCH_I_LARGE_ON, 0);
-        update_latch_stat(E_LATCH_I_MID_ON, 0);
-        update_latch_stat(E_LATCH_I_SMALL_ON, 0);
-        latch_multi_ctrl();
-
-    } else if (IinADCLevel == 1) {
-        // ADC gain level = 1, using 91K resister
-        update_latch_stat(E_LATCH_I_SMALL_ON, 1); /* need open first */
-        update_latch_stat(E_LATCH_I_LARGE_ON, 0);
-        update_latch_stat(E_LATCH_I_MID_ON, 0);
-        latch_multi_ctrl();
-
-    } else if (IinADCLevel == 2) {
-        // ADC gain level = 2, using 4.3K resister
-        update_latch_stat(E_LATCH_I_MID_ON, 1); /* need open first */
-        update_latch_stat(E_LATCH_I_LARGE_ON, 0);
-        update_latch_stat(E_LATCH_I_SMALL_ON, 0);
-        latch_multi_ctrl();
-
-    } else if (IinADCLevel == 3) {
-        // ADC gain level = 3, using 200R resistor
-        update_latch_stat(E_LATCH_I_LARGE_ON, 1); /* need open first */
-        update_latch_stat(E_LATCH_I_MID_ON, 0);
-        update_latch_stat(E_LATCH_I_SMALL_ON, 0);
-        latch_multi_ctrl();
-
-    }
-
-    if (IinADCLevel == 0 || IinADCLevel == 1 || IinADCLevel == 2 || IinADCLevel == 3) {
-        lastIinADCGainLevel = IinADCLevel;
-
-    }
-
-    curr_rec_en = false;
-
-    return;
-}
-
-void VinADCGainCtrl(uint8_t VinADCLevel)
-{
-    if (VinADCLevel >= 3)
-        return;
-
-    /* hardware need open before close, so don't change position*/
-    if (VinADCLevel == 0) {
-        // Vin ADC gain level = 0, using 1M resister
-        update_latch_stat(E_LATCH_V_SMALL_ON, 0);
-        update_latch_stat(E_LATCH_V_MID_ON, 0);
-        latch_multi_ctrl();
-
-    } else if (VinADCLevel == 1) {
-        // Vin ADC gain level = 1, using 30K resister
-        update_latch_stat(E_LATCH_V_MID_ON, 1); /* need open first */
-        update_latch_stat(E_LATCH_V_SMALL_ON, 0);
-        latch_multi_ctrl();
-
-    } else if (VinADCLevel == 2) {
-        // Vin ADC gain level = 2, using 1K resister
-        update_latch_stat(E_LATCH_V_SMALL_ON, 1); /* need open first */
-        update_latch_stat(E_LATCH_V_MID_ON, 0);
-        latch_multi_ctrl();
-
-    }
-
-    if (VinADCLevel == 0 || VinADCLevel == 1 || VinADCLevel == 2) {
-        lastVinADCGainLv = VinADCLevel;
-    }
-
-    volt_rec_en = false;
-
-    return;
-}
-
-
-void AutoGainChangeIin(int32_t RealCurrent, uint16_t plot_type, uint16_t *no_rec_time)
-{
-    /*
-     * instru.IinADCGainLv == I_GAIN_100R: 3 level current(large)
-     *                     == I_GAIN_3K:   2 level current
-     *                     == I_GAIN_100K: 1 level current
-     *                     == I_GAIN_3M:   0 level current(small)
-     * no_rec_time: skip hardware damping
-     */
-
-    int32_t  curr = RealCurrent;
-    uint16_t plot = plot_type;
-    uint16_t *skip_time = no_rec_time;
-
-    int64_t small_gain = I_GAIN_SMALL_BOUNDARY;
-    int64_t mid1_gain1 = I_GAIN_MID1_BOUNDARY1;
-    int64_t mid1_gain2 = I_GAIN_MID1_BOUNDARY2;
-    int64_t mid2_gain1 = I_GAIN_MID2_BOUNDARY1;
-    int64_t mid2_gain2 = I_GAIN_MID2_BOUNDARY2;
-    int64_t large_gain = I_GAIN_LARGE_BOUNDARY;
-
-    uint8_t gain0_en = (instru.gain_switch_on & 0b10000000) >> 7;
-    uint8_t gain1_en = (instru.gain_switch_on & 0b01000000) >> 6;
-    uint8_t gain2_en = (instru.gain_switch_on & 0b00100000) >> 5;
-    uint8_t gain3_en = (instru.gain_switch_on & 0b00010000) >> 4;
-
-    if (instru.IinADCGainLv == I_GAIN_100R) {
-        if (curr < large_gain && curr > -1 * large_gain) {
-            if (curr < mid1_gain1 && curr > -1 * mid1_gain1) {
-                __switch_lv0(gain0_en, plot, skip_time);
-
-            } else if (curr < mid2_gain1 && curr > -1 * mid2_gain1) {
-                __large_switch_lv1(gain1_en, plot, skip_time);
-
-            } else {
-                __large_switch_lv2(gain2_en, plot, skip_time);
-
-            }
-        }
-
-        return;
-    }
-
-    if (instru.IinADCGainLv == I_GAIN_3K) {
-        if (curr > mid2_gain2 || curr < -1 * mid2_gain2) {
-            __switch_lv3(gain3_en, plot, skip_time);
-
-        } else if (curr < mid2_gain1 && curr > -1 * mid2_gain1) {
-            if (curr < mid1_gain1 && curr > -1 * mid1_gain1) {
-                __switch_lv0(gain0_en, plot, skip_time);
-
-            } else {
-                __large_switch_lv1(gain1_en, plot, skip_time);
-
-            }
-        }
-
-        return;
-    }
-
-    if (instru.IinADCGainLv == I_GAIN_100K) {
-        if (curr < mid1_gain1 && curr > -1 * mid1_gain1) {
-            __switch_lv0(gain0_en, plot, skip_time);
-
-        } else if (curr > mid1_gain2 || curr < -1 * mid1_gain2) {
-            if (curr > mid2_gain2 || curr < -1 * mid2_gain2) {
-                __switch_lv3(gain3_en, plot, skip_time);
-
-            } else {
-                __small_switch_lv2(gain2_en, plot, skip_time);
-
-            }
-        }
-
-        return;
-    }
-
-    if (instru.IinADCGainLv == I_GAIN_3M) {
-        if (curr > small_gain || curr < -1 * small_gain) {
-            if (curr > mid2_gain2 || curr < -1 * mid2_gain2) {
-                __switch_lv3(gain3_en, plot, skip_time);
-
-            } else if (curr > mid1_gain2 || curr < -1 * mid1_gain2) {
-                __small_switch_lv2(gain2_en, plot, skip_time);
-
-            } else {
-                __small_switch_lv1(gain1_en, plot, skip_time);
-
-            }
-        }
-
-        return;
-    }
-
-    return;
-}
-
-void AutoGainChangeVin(int32_t RealVin)
-{
-    /*
-     * instru.IinADCGainLv == VIN_GAIN_1K:   2 level volt(large)
-     *                     == VIN_GAIN_30K:  1 level volt
-     *                     == VIN_GAIN_1M:   0 level volt(small)
-     *
-     */
-
-    static int16_t  VIN_GAIN_1M_counter = 0;
-    static int16_t  VIN_GAIN_30K_counter = 0;
-    static int16_t  VIN_GAIN_1K_counter = 0;
-
-    if(instru.VinADCGainLv == VIN_GAIN_1M){
-        if(RealVin > VIN_GAIN_SMALL_BOUNDARY || RealVin < -1*VIN_GAIN_SMALL_BOUNDARY){
-            // switch to 2 level volt(large)
-            if (RealVin > VIN_GAIN_MID1_BOUNDARY2 || RealVin < -1*VIN_GAIN_MID1_BOUNDARY2){
-                VIN_GAIN_1K_counter++;
-                if(VIN_GAIN_1K_counter > 2){
-                    instru.VinADCGainLv = VIN_GAIN_1K;
-                    VinADCGainCtrl(instru.VinADCGainLv);
-                    VIN_GAIN_1K_counter = 0;
-                }
-            }
-            // switch to 1 level volt
-            else{
-                VIN_GAIN_30K_counter++;
-                if(VIN_GAIN_30K_counter > 2){
-                    instru.VinADCGainLv = VIN_GAIN_30K;
-                    VinADCGainCtrl(instru.VinADCGainLv);
-                    VIN_GAIN_30K_counter = 0;
-                }
-            }
-        }else{
-            VIN_GAIN_1M_counter = 0;
-            VIN_GAIN_30K_counter = 0;
-            VIN_GAIN_1K_counter = 0;
-        }
-    }
-    else if(instru.VinADCGainLv == VIN_GAIN_30K){
-        // switch to 0 level volt(small)
-        if(RealVin < VIN_GAIN_MID1_BOUNDARY1 && RealVin > -1*VIN_GAIN_MID1_BOUNDARY1){
-            VIN_GAIN_1M_counter++;
-            if(VIN_GAIN_1M_counter > 2){
-                instru.VinADCGainLv = VIN_GAIN_1M;
-                VinADCGainCtrl(instru.VinADCGainLv);
-                VIN_GAIN_1M_counter = 0;
-            }
-        }
-        else if (RealVin > VIN_GAIN_MID1_BOUNDARY2 || RealVin < -1*VIN_GAIN_MID1_BOUNDARY2){
-            // switch to 2 level volt
-            VIN_GAIN_1K_counter++;
-            if(VIN_GAIN_1K_counter > 2){
-                instru.VinADCGainLv = VIN_GAIN_1K;
-                VinADCGainCtrl(instru.VinADCGainLv);
-                VIN_GAIN_1K_counter = 0;
-            }
-        }else{
-            VIN_GAIN_1M_counter = 0;
-            VIN_GAIN_30K_counter = 0;
-            VIN_GAIN_1K_counter = 0;
-        }
-    }
-    else if(instru.VinADCGainLv == VIN_GAIN_1K){
-        if(RealVin < VIN_GAIN_LARGE_BOUNDARY && RealVin > -1*VIN_GAIN_LARGE_BOUNDARY){
-            // switch to 0 level volt(small)
-            if (RealVin < VIN_GAIN_MID1_BOUNDARY1 && RealVin > -1*VIN_GAIN_MID1_BOUNDARY1){
-                VIN_GAIN_1M_counter++;
-                if(VIN_GAIN_1M_counter > 2){
-                    instru.VinADCGainLv = VIN_GAIN_1M;
-                    VinADCGainCtrl(instru.VinADCGainLv);
-                    VIN_GAIN_1M_counter = 0;
-                }
-            }
-            // switch to 1 level volt
-            else{
-                VIN_GAIN_30K_counter++;
-                if(VIN_GAIN_30K_counter > 2){
-                    instru.VinADCGainLv = VIN_GAIN_30K;
-                    VinADCGainCtrl(instru.VinADCGainLv);
-                    VIN_GAIN_30K_counter = 0;
-                }
-            }
-        }else{
-            VIN_GAIN_1M_counter = 0;
-            VIN_GAIN_30K_counter = 0;
-            VIN_GAIN_1K_counter = 0;
-        }
-    }
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteDAC.h

@@ -1,63 +0,0 @@
-
-#ifndef EliteDAC
-#define EliteDAC
-
-static bool DACReset;
-
-#define DACCLS 0x02
-#define DACOUT 0x31
-
-static void VoutGainControl(uint8_t VOUTLevel){
-    if(VOUTLevel == 0){
-        // VOUT gain level = 0, using 240K resister
-        latch_single_ctrl(E_LATCH_VOUT_SMALL_ON, 0);
-    }
-    else if(VOUTLevel == 1){
-        // VOUT gain level = 1, using 15K resister
-        latch_single_ctrl(E_LATCH_VOUT_SMALL_ON, 1);
-    }
-    else if(VOUTLevel == 2){
-        // VOUT gain level = 2, using 15K resister
-        latch_single_ctrl(E_LATCH_VOUT_SMALL_ON, 1);
-    }
-    else{
-        // default using 15K resister
-        latch_single_ctrl(E_LATCH_VOUT_SMALL_ON, 1);
-    }
-    volt_rec_en = false;
-}
-
-static int32_t User2Real(uint16_t UserCode){
-    /* transfer usercode to real voltage value (mV) */
-    return (int32_t)((UserCode - 25000) / 5);
-}
-
-
-// DAC Vout theoretical boundary <300, 100~ (mV)
-#define DAC_VOUT_GAIN_SMALL_BOUNDARY           100000  // 25500(usercode) = 100 mV
-#define DAC_VOUT_GAIN_LARGE_BOUNDARY           300000  // 26500(usercode) = 300 mV
-#define DAC_VOUT_GAIN_LARGE_BOUNDARY_USERCODE   26500  // 26500(usercode) = 300 mV
-#define DAC_VOUT_GAIN_LARGE_BOUNDARY1_USERCODE  23500  // 23500(usercode) = -300 mV
-
-static void AutoGainChangeVout(int32_t userCode){
-    int32_t RealVolt = (userCode - 25000) * 200; // (userCode - 25000) / 5 * 1000  [1uV]
-    // switch to 1 level volt(small)   15K
-    // switch to 2 level volt(large)   240K
-
-    if(instru.VoutGainLv == VOUT_GAIN_15K){
-        if(RealVolt > DAC_VOUT_GAIN_LARGE_BOUNDARY || RealVolt < -1 * DAC_VOUT_GAIN_LARGE_BOUNDARY){
-            // switch to 2 level volt(large)
-            instru.VoutGainLv = VOUT_GAIN_240K;
-            VoutGainControl(instru.VoutGainLv);
-        }
-    }
-    else if(instru.VoutGainLv == VOUT_GAIN_240K){
-        if(RealVolt < DAC_VOUT_GAIN_SMALL_BOUNDARY && RealVolt > -1 * DAC_VOUT_GAIN_SMALL_BOUNDARY ){
-            // switch to 1 level volt(small)
-            instru.VoutGainLv = VOUT_GAIN_15K;
-            VoutGainControl(instru.VoutGainLv);
-        }
-    }
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteInstruction.h

@@ -1,201 +0,0 @@
-/*=============================================================================
- =                          instr.h                                              =
- =============================================================================*/
-#ifndef ELITE_INSTR_H
-#define ELITE_INSTR_H
-
-#ifdef __cpulsplus
-extern "C" {
-#endif
-
-/*==============================
- ==== headstage instruction ====
- =============================*/
-struct HEADSTAGE_INSTRUCTION {
-    uint8_t  chip_id;
-    uint8_t  eliteFxn;
-
-    // time relation
-    uint8_t  VsetRateIndex;
-    uint32_t VsetRate;
-    uint32_t sampleRate;
-    uint32_t notifyRate;
-    uint32_t period;
-
-    int32_t  Vset;
-    uint16_t VoltConstant;
-    uint8_t  directionInit;
-    uint32_t step;
-    uint16_t Ve1;
-    uint16_t Ve2;
-    int32_t  Vinit;
-    int32_t  Vmax;
-    int32_t  Vmin;
-
-    uint32_t steptime;
-
-    uint8_t  IinADCAutoGainEn;
-    uint8_t  VinADCAutoGainEn;
-    uint8_t  VoutAutoGainEn;
-    uint8_t  IinADCGainLv;
-    uint8_t  VinADCGainLv;
-    uint16_t VoutGainLv;
-    uint8_t  gain_switch_on;
-    uint8_t  AdcChannel;
-    bool     hign_z_en;
-
-    uint16_t cycleNumber;
-    uint8_t  charge;
-    int32_t  constantCurrent;
-    uint8_t  cc_resistance;
-    uint8_t  cc_cp_speed;
-
-    // uni pulse mode
-    int32_t  v0;
-    uint32_t t_pulse[4];
-    int32_t  v_initial[4];
-    int32_t  v_slope[4];
-    int32_t  v_step[4];
-    uint32_t t_pulse_min[4];
-    uint32_t t_pulse_max[4];
-    int32_t  v_stop;
-    int32_t  v_up;
-    int32_t  v_low;
-    bool     v_invert_option;
-    bool     v_stop_direction;
-    int32_t  v_1;
-    int32_t  v_2;
-
-    int32_t Vout;
-
-    // not use
-    int32_t  Currentmax;
-    uint8_t  VoViSwitch;
-
-} instru = {0};
-
-/** Iin, Vin, Vout **/
-#define RIS_ADC_IIN         0x00
-#define RIS_ADC_VIN         0x01
-#define RIS_DAC_VOUT        0x02
-#define RIS_HIGH_Z          0x03
-#define RIS_ADC_VOUT        0x04
-#define RIS_ADC_BAT         0x05
-
-// ADC Iin gain level !!! move to ADC.h in future
-#define I_GAIN_3M       0x00    // lv0,largest gain
-#define I_GAIN_100K     0x01    // lv1
-#define I_GAIN_3K       0x02    // lv2
-#define I_GAIN_100R     0x03    // lv3,the least gain
-#define I_GAIN_AUTO     0x04
-
-// ADC Vin gain level !!! move to ADC.h in future
-#define VIN_GAIN_1M     0x00
-#define VIN_GAIN_30K    0x01
-#define VIN_GAIN_1K     0x02
-#define VIN_GAIN_AUTO   0x03
-
-// DAC Vout gain level !!! move to DAC.h in future
-#define VOUT_GAIN_240K  0x00
-#define VOUT_GAIN_15K   0x01
-#define VOUT_GAIN_AUTO  0x02
-
-/* DAC reset parameter */
-#define DAC_ZERO    25000 // DAC_ZERO is about 0V
-
-// Step time macro
-#define STEPTIME_HALF_SEC 5000
-#define STEPTIME_ONE_SEC 10000
-#define STEPTIME_TWO_SEC 20000
-
-/*********************************************************************
- * @fn      InitEliteInstruction
- *
- * @brief   Init all INSTRUCTION variable.
- *
- * @param   None.
- *
- * @return  None.
- */
-static void InitEliteInstruction(void)
-{
-    instru.chip_id         = 0;
-    instru.eliteFxn        = 0;         //default is a null event
-
-    instru.VsetRateIndex   = 0;         // vscan rate
-    instru.VsetRate        = 2;
-    instru.sampleRate      = 20;        // ADC's sample rate
-    instru.notifyRate      = CLOCK_ONE_SECOND;   // send data's rate
-    instru.period          = CLOCK_ONE_SECOND;
-
-    instru.Vset            = 0;         // vscan's volt[5nv]
-    instru.VoltConstant    = DAC_ZERO;  // DAC's volt[UC]
-    instru.directionInit   = 1;         // 0:reverse, 1:forward
-    instru.step            = 0;
-    instru.Ve1             = DAC_ZERO;  // user set volt[UC]
-    instru.Ve2             = DAC_ZERO;  // user set volt[UC]
-    instru.Vinit           = 0;         // user set init volt[5nv]
-    instru.Vmax            = 0;         // user set max volt[5nv]
-    instru.Vmin            = 0;         // user set min voit[5nv]
-
-    instru.IinADCAutoGainEn = 1;
-    instru.VinADCAutoGainEn = 1;
-    instru.VoutAutoGainEn   = 1;
-    instru.IinADCGainLv     = I_GAIN_100R;
-    instru.VinADCGainLv     = VIN_GAIN_1K;
-    instru.VoutGainLv       = VOUT_GAIN_15K;
-    instru.gain_switch_on   = 0b11110000;   // cur auto gain switch, |lv0|lv1|lv2|lv3|none|none|none|none|
-    instru.AdcChannel       = 0;         // RIS_ADC_IIN: 0x00, RIS_ADC_VIN: 0x01, RIS_DAC_VOUT: 0x02, RIS_HIGH_Z: 0x03
-    instru.hign_z_en        = 0;
-
-    instru.cycleNumber     = 1;
-    instru.charge          = 1;         // 0:discharge, 1:charge
-    instru.constantCurrent = 0;
-
-    // uni pulse mode
-    instru.v0              = DAC_ZERO;  // t < 0, volt is 0v
-    instru.v_stop          = 0;
-    instru.t_pulse[0]      = 0;
-    instru.t_pulse[1]      = 0;
-    instru.t_pulse[2]      = 0;
-    instru.t_pulse[3]      = 0;
-    instru.v_initial[0]    = 0;
-    instru.v_initial[1]    = 0;
-    instru.v_initial[2]    = 0;
-    instru.v_initial[3]    = 0;
-    instru.v_slope[0]      = 0;
-    instru.v_slope[1]      = 0;
-    instru.v_slope[2]      = 0;
-    instru.v_slope[3]      = 0;
-    instru.v_step[0]       = 0;
-    instru.v_step[1]       = 0;
-    instru.v_step[2]       = 0;
-    instru.v_step[3]       = 0;
-    instru.t_pulse_min[0]  = 0;
-    instru.t_pulse_min[1]  = 0;
-    instru.t_pulse_min[2]  = 0;
-    instru.t_pulse_min[3]  = 0;
-    instru.t_pulse_max[0]  = 0;
-    instru.t_pulse_max[1]  = 0;
-    instru.t_pulse_max[2]  = 0;
-    instru.t_pulse_max[3]  = 0;
-    instru.v_invert_option = false;
-    instru.v_stop_direction = true;
-    instru.v_1              = 0;
-    instru.v_2              = 0;
-
-    instru.Vout            = 0;
-
-    // not use
-    instru.Currentmax      = 0;
-    instru.VoViSwitch      = 0x01;
-
-    return;
-}
-
-#ifdef __cpulsplus
-}
-#endif
-#endif
-
-

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteLED.h

@@ -1,104 +0,0 @@
-
-#ifndef ELITELED
-#define ELITELED
-
-static bool     btWaitLedFlag   = 0;
-static bool     noEventLedFlag  = 0;
-static bool     preWorkLedFlag  = 0;
-static bool     workingLedFlag  = 0;
-static bool     postWorkLedFlag = 0;
-
-static void WorkModeLED();
-
-static void ModeLED(uint16_t modeStatus) {
-    btWaitLedFlag   = 0;
-    noEventLedFlag  = 0;
-    preWorkLedFlag  = 0;
-    workingLedFlag  = 0;
-    postWorkLedFlag = 0;
-
-    switch (modeStatus) {
-        case BT_WAIT:
-            btWaitLedFlag = 1;
-            led_color_set(LED_NB_MAX, LED_BR_LV1, LED_CLR_YELLOWGREEN);
-            break;
-
-        case NO_EVENT:
-            noEventLedFlag = 1;
-            led_color_set(LED_NB_MAX, LED_BR_LV1, LED_CLR_GREEN);
-            break;
-
-        case PRE_WORK:
-            preWorkLedFlag = 1;
-            led_color_set(LED_NB_MAX, LED_BR_LV1, LED_CLR_BLUE);
-            break;
-
-        case WORKING:
-            workingLedFlag = 1;
-            WorkModeLED();
-            break;
-
-        case POST_WORK:
-            postWorkLedFlag = 1;
-            led_color_set(LED_NB_MAX, LED_BR_LV1, LED_CLR_GREEN);
-            break;
-
-        default:
-            break;
-    }
-}
-
-static void checkFlafLED()
-{
-    if(btWaitLedFlag == 1) {
-        ModeLED(BT_WAIT);
-    } else if(noEventLedFlag == 1) {
-        ModeLED(NO_EVENT);
-    } else if(preWorkLedFlag == 1) {
-        ModeLED(PRE_WORK);
-    } else if(workingLedFlag == 1) {
-        ModeLED(WORKING);
-    } else if(postWorkLedFlag == 1) {
-        ModeLED(POST_WORK);
-    }
-}
-
-static void WorkModeLED()
-{
-    switch (instru.eliteFxn) {
-        case CURVE_IV:
-        case CURVE_VO:
-        case CURVE_RT:
-        case CURVE_VT:
-        case CURVE_IT:
-        case CURVE_CV:
-        case CURVE_CA:
-        case CURVE_CC:
-        case CURVE_OCP:
-        case CURVE_LSV:
-        case CURVE_IV_CY:
-        case CURVE_UNI_PULSE:
-        case CURVE_DPV:
-        case CURVE_DPV_SMPRATE:
-        case CURVE_DPV_ADVANCE:
-        case CURVE_DPV_ADVANCE_SMPRATE:
-            led_color_set(LED_NB_MAX, LED_BR_LV1, LED_CLR_CYAN);
-            break;
-
-        case CURVE_CALI_ADC:
-            if (instru.AdcChannel == RIS_ADC_IIN) {
-                led_color_set(LED_NB_MAX, LED_BR_LV1, LED_CLR_RED);
-            } else if (instru.AdcChannel == RIS_ADC_VIN) {
-                led_color_set(LED_NB_MAX, LED_BR_LV1, LED_CLR_ORANGE);
-            } else if (instru.AdcChannel == RIS_DAC_VOUT) {
-                led_color_set(LED_NB_MAX, LED_BR_LV1, LED_CLR_BLUE);
-            }
-            break;
-
-        default:
-            break;
-
-    }
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteNotify.h

@@ -1,151 +0,0 @@
-/**
- * notify data buffer.
- * the length equals to the characteristic 4 which value is 20 bytes.
- *
- */
-
-#ifndef ELITENOTIFY
-#define ELITENOTIFY
-
-#include "headstage.h"
-#include <string.h>
-
-/*notify's input type*/
-#define NOTIFY_CURRENT      0
-#define NOTIFY_VOLT         1
-#define NOTIFY_IMPEDANCE    2
-#define NOTIFY_VOLT_BAT     3
-#define NOTIFY_TEMPERATURE  4
-
-#define FINISH_MODE_INS 0b10100000
-
-static uint32_t not_time_stamp;
-static uint8_t  NotifyCurrent[4]   = {0};
-static uint8_t  NotifyVolt[4]      = {0};
-static uint8_t  NotifyImpedance[4] = {0};
-static uint16_t NotifyVoltBat      = 0;
-static uint16_t NotifyTemperature  = 0;
-static uint16_t NotifyCycleNumber  = 0;
-static bool  finishMode         = false;
-
-/*
- * Notify format
- *
- *
-         |               |   1           |       2       |           3   |
-         0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2
-         -----------------------------------------------------------------
-         |    header     |
-         |    current                                                    |
-         |    voltage                                                    |
-         |    impedance                                                  |
-         |    time stamp                                                 |
-         |  cycle number |
-
-     cycle number
-         for cyclic voltammetry use, we save it as channel number.
-         0xFF
-
-  * header = device ID
-  * I = current (nA),    V = voltage (uV),
-  * Z = impedance (ohm), T = time (ms)
-  *
-  *
-*/
-static void SendNotify() {
-    static uint8_t notify_times = 0;
-    uint32_t bat = NotifyVoltBat;
-
-    initDATBuf();
-
-    // 1 Timestamp = 32 usec;  31 Timestamp ~= 1 msec
-    not_time_stamp = (Timestamp_get32()) / 31;  // msec
-
-    not_buf[0] = instru.chip_id;
-
-    memcpy(not_buf+1, (uint8_t *)&not_time_stamp, sizeof(not_time_stamp));
-    memcpy(not_buf+5, NotifyCurrent, sizeof(NotifyCurrent));
-    memcpy(not_buf+9, NotifyVolt, sizeof(NotifyVolt));
-    memcpy(not_buf+13, NotifyImpedance, sizeof(NotifyImpedance));
-    memcpy(not_buf+17, (uint8_t *)&NotifyCycleNumber, sizeof(NotifyCycleNumber));
-
-    if (finishMode) {
-        not_buf[19] = (FINISH_MODE_INS) & 0b11110000;
-    } else {
-        not_buf[19] = 0 & 0b11110000;
-    }
-
-    memcpy(not_buf+20, (uint8_t *)&bat, sizeof(bat));
-    memcpy(not_buf+24, &notify_times, sizeof(notify_times));
-
-    for (int i = 25; i < BLE_DAT_BUFF_SIZE; i++){
-        not_buf[i] = 0;
-    }
-
-    SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
-    notify_times++;
-}
-
-static void initDATBuf(){
-    for (int i = 0; i < BLE_DAT_BUFF_SIZE; i++){
-        not_buf[i] = 0;
-    }
-}
-
-static void initINSBuf(){
-    for (int i = 0; i < BLE_INS_BUFF_SIZE; i++){
-        ins_buf[i] = 0;
-    }
-}
-
-static void initCISBuf(){
-    for (int i = 0; i < BLE_CIS_BUFF_SIZE; i++){
-        cis_buf[i] = 0;
-    }
-}
-
-static void initRawDataBuf(){
-    not_time_stamp    = 0;
-    NotifyCycleNumber = 0;
-    finishMode        = false;
-
-    for (int i = 0; i < 4; i++){
-        NotifyCurrent[i]   = 0;
-        NotifyVolt[i]      = 0;
-        NotifyImpedance[i] = 0;
-    }
-}
-
-static void FlushNotify(){
-    initRawDataBuf();
-    initDATBuf();
-
-    not_buf[0] = instru.chip_id;
-
-    SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
-}
-
-static void InputNotify(int NotifyType, int32_t Data){
-
-    switch (NotifyType) {
-        case NOTIFY_CURRENT:
-            memcpy(NotifyCurrent, (uint8_t *)&Data, sizeof(Data));
-            break;
-
-        case NOTIFY_IMPEDANCE:
-            memcpy(NotifyImpedance, (uint8_t *)&Data, sizeof(Data));
-            break;
-
-        case NOTIFY_VOLT :
-            memcpy(NotifyVolt, (uint8_t *)&Data, sizeof(Data));
-            break;
-
-        case NOTIFY_VOLT_BAT :
-            NotifyVoltBat = (uint16_t)Data;
-            break;
-        case NOTIFY_TEMPERATURE :
-            NotifyTemperature = (uint16_t)Data;
-            break;
-    }
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteReset.h

@@ -1,49 +0,0 @@
-
-#ifndef ELITERESET
-#define ELITERESET
-
-static void reset() {
-    megaStiEnable = false;
-    PeriodicEvent = false;     // is there an PeriodicEvent?
-    Free_Work_Mode = true;      // Free(WorkModeData)
-
-    initINSBuf();
-    initDATBuf();
-
-    latch_single_ctrl(E_LATCH_HIGH_Z, 0); // HIGH Z MODE // 1: close; 0: open;
-
-    instru.VinADCGainLv = VIN_GAIN_1K;
-    VinADCGainCtrl(instru.VinADCGainLv);
-    instru.IinADCGainLv = I_GAIN_100R;
-    IinADCGainCtrl(instru.IinADCGainLv);
-
-    instru.VoutGainLv = VOUT_GAIN_15K;
-    VoutGainControl(instru.VoutGainLv);
-    DAC0_W_T(Usercode_Correction_to_DAC(instru.VoutGainLv, 25000));
-
-
-
-    ModeLED(NO_EVENT);
-    CPUdelay(1600);
-}
-
-static void Eliteinterrupt() {
-    megaStiEnable = false;
-    PeriodicEvent = false;     // is there an PeriodicEvent?
-    Free_Work_Mode = true;      // Free(WorkModeData)
-
-    initINSBuf();
-    initDATBuf();
-
-    latch_single_ctrl(E_LATCH_HIGH_Z, 0); // HIGH Z MODE // 1: close; 0: open;
-
-    instru.VoutGainLv = VOUT_GAIN_15K;
-    VoutGainControl(instru.VoutGainLv);
-    DAC0_W_T(Usercode_Correction_to_DAC(instru.VoutGainLv, 25000));
-    
-    ADC_rxbuf = 0;
-    
-    ModeLED(NO_EVENT);
-    CPUdelay(8000);
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteWorkData.h

@@ -1,798 +0,0 @@
-/*=============================================================================
- =                          wm.h                                              =
- =============================================================================*/
-#ifndef ELITE_WORK_DATA_H
-#define ELITE_WORK_DATA_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#include "EliteInstruction.h"
-
-/***** Template of Measure and VoltOut parameter *****/
-#define VOUT_PARA                    \
-    int32_t  _Vinit;                 \
-    int32_t  _Vmax;                  \
-    int32_t  _Vmin;                  \
-    int32_t  _Vset;                  \
-    uint32_t _Vstep;                 \
-    bool     _direction_up;          \
-    bool     _current_direction_up;  \
-    uint16_t _cycleNumber
-
-#define MEAS_CURR(_m)      (((struct wm_meas_t *)(_m))->_measureCurrent)
-#define MEAS_VIN(_m)       (((struct wm_meas_t *)(_m))->_measureVin)
-#define MEAS_VOUT(_m)      (((struct wm_meas_t *)(_m))->_measureVout)
-#define MEAS_BAT(_m)       (((struct wm_meas_t *)(_m))->_measureBat)
-#define VOLT_SW(_m)        (((struct wm_meas_t *)(_m))->_VoViSwitch)
-
-struct wm_meas_t {
-    int32_t  _measureCurrent;
-    int32_t  _measureVin;
-    int32_t  _measureVout;
-    int32_t  _measureBat;
-    uint8_t  _VoViSwitch;
-};
-
-/* member of mode */
-struct wm_vo_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t _Vset;
-    int32_t _Vinit;
-};
-
-struct wm_it_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t _Vset;
-    int32_t _Vinit;
-};
-
-struct wm_vt_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-};
-
-struct wm_rt_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t _Vset;
-    int32_t _Vinit;
-};
-
-struct wm_iv_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    VOUT_PARA;
-};
-
-struct wm_iv_cy_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    VOUT_PARA;
-};
-
-struct wm_cc_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t _Vmax;
-    int32_t _Vmin;
-    int32_t _Vset;
-    int32_t _Iset;
-    uint8_t _charge;
-};
-
-struct wm_cv_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    VOUT_PARA;
-};
-
-struct wm_lsv_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    VOUT_PARA;
-};
-
-struct wm_ca_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t _Vinit;
-    int32_t _Vset;
-};
-
-struct wm_pulse_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t  _Vset;
-    int32_t  _sti_v1;
-    int32_t  _sti_v2;
-    int32_t  _sti_v3;
-    int32_t  _sti_v4;
-    int32_t  _sti_v5;
-    int32_t  _sti_v6;
-    int32_t  _sti_v7;
-    int32_t  _sti_t1;
-    int32_t  _sti_t2;
-    int32_t  _sti_t3;
-    int32_t  _sti_t4;
-    int32_t  _sti_t5;
-    int32_t  _sti_t6;
-    int32_t  _sti_t7;
-    int32_t  _sti_t;
-    int32_t  _sti_v;         //output voltage now
-    int32_t  _sti_t_flag;    //Where's the time stage turn
-    uint16_t _sti_cy;
-    uint16_t _sti_lp;
-};
-
-struct wm_uni_pulse_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t  _Vset;
-
-    int32_t _v0;
-    uint32_t _t_pulse[4];
-    int32_t _v_initial[4];
-    int32_t _v_slope[4];
-    int32_t _v_step[4];
-
-    uint32_t _t_period;
-    uint32_t _t_pa[4];
-
-    uint32_t _t_pulse_min[4];
-    uint32_t _t_pulse_max[4];
-};
-
-struct wm_dpv_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t  _Vset;
-
-    int32_t _v0;
-    uint32_t _t_pulse[4];
-    int32_t _v_initial[4];
-    int32_t _v_slope[4];
-    int32_t _v_step[4];
-
-    uint32_t _t_period;
-    uint32_t _t_pa[4];
-    int32_t _v_stop;
-    bool _v_curr_direc;
-    int32_t _v_amp;
-
-    uint32_t _t_pulse_min[4];
-    uint32_t _t_pulse_max[4];
-
-    bool _v_direc_init;
-};
-
-struct wm_dpv_advance_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t  _Vset;
-
-    int32_t _v0;
-    uint32_t _t_pulse[4];
-    int32_t _v_initial[4];
-    int32_t _v_slope[4];
-    int32_t _v_step[4];
-
-    uint32_t _t_period;
-    uint32_t _t_pa[4];
-    int32_t _v_stop;
-    int32_t _v_up;
-    int32_t _v_low;
-    int32_t _v_amp;
-    int32_t _v_1;
-    int32_t _v_2;
-
-    uint32_t _t_pulse_min[4];
-    uint32_t _t_pulse_max[4];
-
-    uint16_t _cycleNumber;
-
-    bool _v_curr_direc;
-    bool _v_direc_init;
-    bool _v_invert_option;
-    bool _v_stop_direction;
-};
-
-struct wm_ocp_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-};
-
-int wm_init(void);
-int wm_deinit(void);
-void *wm_get(void);
-
-/*=============================================================================
- =                          wm.c                                              =
- =============================================================================*/
-
-static void *workMode_p = NULL;
-static bool Free_Work_Mode = false;
-
-/* init mode func */
-static int __vo_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_vo_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_vo_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __it_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_it_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_it_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __vt_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_vt_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_vt_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __rt_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_rt_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_rt_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __iv_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_iv_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_iv_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vmax           = (instru.Vmax  - 25000) * 4 * 10000; //[5nV]
-    p->_Vmin           = (instru.Vmin  - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-    p->_Vstep          = 0;
-    p->_direction_up   = true;
-    p->_current_direction_up = true;
-    p->_cycleNumber    = instru.cycleNumber;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __iv_cy_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_iv_cy_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_iv_cy_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vmax           = (instru.Vmax  - 25000) * 4 * 10000; //[5nV]
-    p->_Vmin           = (instru.Vmin  - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-    p->_Vstep          = 0;
-    p->_direction_up   = true;
-    p->_current_direction_up = true;
-    p->_cycleNumber    = instru.cycleNumber;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __cc_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_cc_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_cc_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vmax           = (instru.Vmax  - 25000) * 4 * 10000; //[5nV]
-    p->_Vmin           = (instru.Vmin  - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-    p->_charge         = instru.charge;
-    p->_Iset           = instru.constantCurrent * 200 ;
-    //[50pA] //controller UI 15000uA => Elite 1500000 => 1500000 * 10 * 1000 / 50 [50pA]
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __cv_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_cv_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_cv_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-	p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vmax           = (instru.Vmax  - 25000) * 4 * 10000; //[5nV]
-    p->_Vmin           = (instru.Vmin  - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-    p->_Vstep          = 0;
-    p->_direction_up   = true;
-    p->_current_direction_up = true;
-    p->_cycleNumber    = instru.cycleNumber;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __lsv_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_lsv_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_lsv_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-	p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vmax           = (instru.Vmax  - 25000) * 4 * 10000; //[5nV]
-    p->_Vmin           = (instru.Vmin  - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-    p->_Vstep          = 0;
-    p->_direction_up   = true;
-    p->_current_direction_up = true;
-    p->_cycleNumber    = instru.cycleNumber;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __ca_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_ca_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_ca_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __uni_pulse_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_uni_pulse_ctx_t *p;
-    void **wm = &workMode_p;
-    uint32_t pul_acc = 0;
-    int i;
-
-    p = malloc(sizeof(struct wm_uni_pulse_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vset           = 0;
-
-    p->_v0             = UC_TO_5NV(instru.v0); //[5nV]
-
-    p->_t_pulse[0]     = instru.t_pulse[0];
-    p->_t_pulse[1]     = instru.t_pulse[1];
-    p->_t_pulse[2]     = instru.t_pulse[2];
-    p->_t_pulse[3]     = instru.t_pulse[3];
-
-    p->_v_initial[0]   = UC_TO_5NV(instru.v_initial[0]); //[5nv]
-    p->_v_initial[1]   = UC_TO_5NV(instru.v_initial[1]); //[5nv]
-    p->_v_initial[2]   = UC_TO_5NV(instru.v_initial[2]); //[5nv]
-    p->_v_initial[3]   = UC_TO_5NV(instru.v_initial[3]); //[5nv]
-
-    p->_v_slope[0]     = instru.v_slope[0];
-    p->_v_slope[1]     = instru.v_slope[1];
-    p->_v_slope[2]     = instru.v_slope[2];
-    p->_v_slope[3]     = instru.v_slope[3];
-
-    p->_v_step[0]      = UC_TO_5NV(instru.v_step[0]); //[5nv]
-    p->_v_step[1]      = UC_TO_5NV(instru.v_step[1]); //[5nv]
-    p->_v_step[2]      = UC_TO_5NV(instru.v_step[2]); //[5nv]
-    p->_v_step[3]      = UC_TO_5NV(instru.v_step[3]); //[5nv]
-
-    p->_t_period = 0;
-
-    for (i=0; i<4; i++) {
-        p->_t_pa[i] = pul_acc + p->_t_pulse[i];
-        pul_acc = p->_t_pa[i];
-        p->_t_period += p->_t_pulse[i];
-    }
-
-    instru.period = p->_t_period;
-
-    p->_t_pulse_min[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_min[0] / 100 + 50;
-    p->_t_pulse_min[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_min[1] / 100 + 50;
-    p->_t_pulse_min[2]     = (instru.t_pulse[2] - 100) * instru.t_pulse_min[2] / 100 + 50;
-    p->_t_pulse_min[3]     = (instru.t_pulse[3] - 100) * instru.t_pulse_min[3] / 100 + 50;
-
-    p->_t_pulse_max[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_max[0] / 100 + 50;
-    p->_t_pulse_max[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_max[1] / 100 + 50;
-    p->_t_pulse_max[2]     = (instru.t_pulse[2] - 100) * instru.t_pulse_max[2] / 100 + 50;
-    p->_t_pulse_max[3]     = (instru.t_pulse[3] - 100) * instru.t_pulse_max[3] / 100 + 50;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __dpv_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_dpv_ctx_t *p;
-    void **wm = &workMode_p;
-    uint32_t pul_acc = 0;
-    int i;
-
-    p = malloc(sizeof(struct wm_dpv_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vset           = 0;
-
-    p->_v0             = instru.v0; //[5nV]
-    p->_v_stop         = instru.v_stop; //[5nV]
-
-    p->_t_pulse[0]     = instru.t_pulse[0];
-    p->_t_pulse[1]     = instru.t_pulse[1];
-
-    p->_v_initial[0]   = instru.v_initial[0]; //[5nv]
-    p->_v_initial[1]   = instru.v_initial[1]; //[5nv]
-
-    p->_v_slope[0]     = instru.v_slope[0];
-    p->_v_slope[1]     = instru.v_slope[1];
-
-    p->_v_step[0]      = instru.v_step[0]; //[5nv]
-    p->_v_step[1]      = instru.v_step[1]; //[5nv]
-
-    p->_t_period = 0;
-
-    for (i=0; i<4; i++) {
-        p->_t_pa[i] = pul_acc + p->_t_pulse[i];
-        pul_acc = p->_t_pa[i];
-        p->_t_period += p->_t_pulse[i];
-    }
-
-    instru.period = p->_t_period;
-
-    p->_v_direc_init   = instru.directionInit;
-    p->_v_curr_direc = instru.directionInit;
-    p->_v_amp = instru.v_initial[1] - instru.v_initial[0];
-
-    p->_t_pulse_min[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_min[0] / 100 + 50;
-    p->_t_pulse_min[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_min[1] / 100 + 50;
-
-    p->_t_pulse_max[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_max[0] / 100 + 50;
-    p->_t_pulse_max[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_max[1] / 100 + 50;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __dpv_advance_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_dpv_advance_ctx_t *p;
-    void **wm = &workMode_p;
-    uint32_t pul_acc = 0;
-    int i;
-
-    p = malloc(sizeof(struct wm_dpv_advance_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vset           = 0;
-
-    p->_v0             = instru.v0; //[5nV]
-    p->_v_stop         = instru.v_stop; //[5nV]
-
-    p->_t_pulse[0]     = instru.t_pulse[0];
-    p->_t_pulse[1]     = instru.t_pulse[1];
-
-    p->_v_initial[0]   = instru.v_initial[0]; //[5nv]
-    p->_v_initial[1]   = instru.v_initial[1]; //[5nv]
-
-    p->_v_slope[0]     = instru.v_slope[0];
-    p->_v_slope[1]     = instru.v_slope[1];
-
-    p->_v_step[0]      = instru.v_step[0]; //[5nv]
-    p->_v_step[1]      = instru.v_step[1]; //[5nv]
-
-    p->_t_period = 0;
-
-    for (i=0; i<4; i++) {
-        p->_t_pa[i] = pul_acc + p->_t_pulse[i];
-        pul_acc = p->_t_pa[i];
-        p->_t_period += p->_t_pulse[i];
-    }
-
-    instru.period = p->_t_period;
-
-    p->_v_direc_init   = instru.directionInit;
-    p->_v_curr_direc = instru.directionInit;
-    p->_v_stop_direction = instru.v_stop_direction;
-    p->_v_up = instru.v_up;
-    p->_v_low = instru.v_low;
-    p->_v_amp = instru.v_initial[1] - instru.v_initial[0];
-    p->_v_1 = instru.v_1;
-    p->_v_2 = instru.v_2;
-
-    p->_t_pulse_min[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_min[0] / 100 + 50;
-    p->_t_pulse_min[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_min[1] / 100 + 50;
-
-    p->_t_pulse_max[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_max[0] / 100 + 50;
-    p->_t_pulse_max[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_max[1] / 100 + 50;
-
-    p->_cycleNumber = instru.cycleNumber;
-    p->_v_invert_option = instru.v_invert_option;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __ocp_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_ocp_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_ocp_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    *wm = p;
-
-    return 0;
-}
-
-int wm_init(void)
-{
-    int mode = instru.eliteFxn;
-    void **wm = &workMode_p;
-
-    if (*wm) return -1;
-
-    switch (mode) {
-        case CURVE_VO:
-            if (__vo_create()) return -2;
-            break;
-
-        case CURVE_IT:
-            if (__it_create()) return -2;
-            break;
-
-        case CURVE_VT:
-            if (__vt_create()) return -2;
-            break;
-
-        case CURVE_RT:
-            if (__rt_create()) return -2;
-            break;
-
-        case CURVE_IV:
-            if (__iv_create()) return -2;
-            break;
-
-        case CURVE_IV_CY:
-            if (__iv_cy_create()) return -2;
-            break;
-
-        case CURVE_CC:
-            if (__cc_create()) return -2;
-            break;
-
-        case CURVE_CV:
-            if (__cv_create()) return -2;
-            break;
-
-        case CURVE_LSV:
-            if (__lsv_create()) return -2;
-            break;
-
-        case CURVE_CA:
-            if (__ca_create()) return -2;
-            break;
-
-        case CURVE_UNI_PULSE:
-            if (__uni_pulse_create()) return -2;
-            break;
-
-        case CURVE_OCP:
-            if (__ocp_create()) return -2;
-            break;
-
-        case CURVE_DPV:
-        case CURVE_DPV_SMPRATE:
-            if (__dpv_create()) return -2;
-            break;
-        case CURVE_DPV_ADVANCE:
-        case CURVE_DPV_ADVANCE_SMPRATE:
-            if (__dpv_advance_create()) return -2;
-            break;
-
-        default:
-            // printf("DO NOT support!!");
-            return -3;
-    }
-
-    return 0;
-}
-
-int wm_deinit(void)
-{
-    void **wm = &workMode_p;
-
-    if (*wm) {
-        free(*wm);
-        *wm = NULL;
-    } else {
-        return -1;
-    }
-
-    return 0;
-}
-
-void *wm_get(void)
-{
-    void *wm = workMode_p;
-
-    return wm;
-}
-
-#ifdef  __cplusplus
-}
-#endif
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_batt.h

@@ -1,99 +0,0 @@
-/*
-***********************************************************
-    Read battery's method
-***********************************************************
-1.read_adc_raw_data(RIS_ADC_BAT, spi_ADC_rxbuf, spi_ADC_txbuf);
-  let "spi_ADC_rxbuf" be 8000
-  8000 * 187.5uV * 2 = 3000000uV = 3V ;
-2.AONBatMonBatteryVoltageGet()
-  let "AONBatMonBatteryVoltageGet()" be 768
-  768 * 125 / 320 / 100 = 768 / 256 = 3V ;
-
-if you want to use first method, and get value 768
-conversion: 8000 * 187.5 * 1e-6 * 2 / 125 * 320 * 100 = 768
-         => 8000 * 12 / 125 = 768
-*/
-
-#ifndef HEADSTAGE_BATT_H
-#define HEADSTAGE_BATT_H
-
-#include <driverlib/aon_batmon.h>
-#define MAX_BATTERY_CAPACITY 4200
-
-static uint8_t headstage_battery_percent() {
-    static uint8_t battery_percent = 100;
-    uint8_t  internal_battery_percent;
-    uint32_t internal_batt_sense = AONBatMonBatteryVoltageGet();
-    internal_batt_sense          = (internal_batt_sense * 125) >> 5;
-    internal_batt_sense          = (internal_batt_sense * 100) / MAX_BATTERY_CAPACITY;
-    internal_battery_percent     = internal_batt_sense & 0xFF;
-    if (internal_battery_percent < battery_percent) battery_percent = internal_battery_percent;
-    return battery_percent;
-}
-
-static void headstage_battery_volt(){
-    uint32_t bat_volt = 0;
-
-    ADC_rxbuf = MEASURE_BATTERY();
-    bat_volt = (uint32_t) ADC_rxbuf;
-    bat_volt = bat_volt * 12 / 125; //x  * 187.5 * 1e-6 * 2 / 125 * 320 * 100 ;
-//    bat_volt = (bat_volt - 1) * 187.5 * 2;
-
-    InputNotify(NOTIFY_VOLT_BAT, bat_volt);
-}
-
-static void headstage_temperature(void) {
-    int32_t curTemp = 0;
-
-    curTemp = AONBatMonTemperatureGetDegC();
-    InputNotify(NOTIFY_TEMPERATURE,curTemp);
-}
-
-static bool EliteADCBattery(){
-    static uint8_t ADCSwitch = 0;
-    bool read_adc_flag = false;
-    if(ADCSwitch == 0){ /**read V**/
-        ADC_rxbuf = MEASURE_BATTERY();
-        ADCSwitch++;
-    }
-    else if(ADCSwitch == 1){ /**read V**/
-        ADC_rxbuf = MEASURE_BATTERY();
-        ADCSwitch++;
-    }
-    else if(ADCSwitch == 2){ /**read V(buffer)**/
-        headstage_battery_volt();
-        headstage_temperature();
-        ADCSwitch++;
-        read_adc_flag = true;
-
-    }else if(ADCSwitch == 3){
-        batteryCheck_flag = false;
-        tempCheck_flag = false;
-        ADCSwitch = 0;
-    }
-
-    return read_adc_flag;
-}
-
-static void measureBat(){
-    if(GPT.BatteryCheckCounter >= 50000){//5min=3000000, 5s=50000
-        GPT.BatteryCheckCounter = 0;
-        batteryCheck_flag = true;
-    }
-
-    if(GPT.BatteryADCCounter >= 15 && batteryCheck_flag){
-        GPT.BatteryADCCounter = 0; //To get the data right, ADC must be delay 1.5ms
-        batteryADC_flag = true;
-        if(batteryADC_flag){
-            EliteADCBattery();
-            batteryADC_flag = false;
-        }
-    }
-
-    uint16_t bat = NotifyVoltBat;
-    if( bat < 768 && bat > 20){
-        latch_single_ctrl(E_LATCH_5V_ENABLE, 0);
-    }
-}
-
-#endif  // HEADSTAGE_BATT_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_def.h

@@ -1,110 +0,0 @@
-#ifndef ELITE_DEF
-#define ELITE_DEF
-
-// define BT instruction
-#define INS_TYPE_RIS                    0x30
-#define INS_TYPE_VIS                    0xC0
-#define INS_TYPE_CIS                    0x70
-
-// VIS (virtual instruction)
-#define VIS_RST                         0xF0
-#define VIS_ASK                         0x30
-#define VIS_STI                         0xC0
-#define VIS_FUH                         0x90
-#define VIS_INT                         0x60
-#define VIS_SHIFT_200K                  0xA0
-#define VIS_SHIFT_10K                   0xE0
-#define VIS_SHIFT_200R                  0x80
-#define VIS_DEVICE_SHINY                0x10
-#define VIS_SHINY_DIS                   0x20
-
-// RIS (real instruction)
-enum all_mode_e {
-    CURVE_IV                       =  0x01, // I-V Curve
-    CURVE_IV_CY                    =  0x02, // Cycle I-V
-    CURVE_VO                       =  0x03, // Function Generator
-    CURVE_RT                       =  0x04, // R-T Graph
-    CURVE_VT                       =  0x05, // V-T Graph
-    CURVE_IT                       =  0x06, // I-T Graph
-    CURVE_CC                       =  0x07, // Constant Current (CC)
-    CURVE_OCP                      =  0x08, // Open Circuit Potential (OCP)
-    CURVE_CV                       =  0x09, // Cyclic Voltammetry (CV)
-    CURVE_LSV                      =  0x0A, // Linear Sweep Voltammetry (LSV)
-    CURVE_CA                       =  0x0B, // Chronoamperometric Graph (CA)
-    CURVE_UNI_PULSE                =  0x0D, // Pulse Sensing (universal pulse)
-    CURVE_DPV                      =  0x0E, // Differential Pulse Voltammetry (DPV)
-    CURVE_DPV_SMPRATE              =  0x0F,
-    CURVE_DPV_ADVANCE              =  0x10,
-    CURVE_DPV_ADVANCE_SMPRATE      =  0x11,
-
-    CURVE_CALI_ADC                 =  0xF1, // Cali ADC - test
-
-
-    SET_SAMPLE_RATE                =  0xE0,
-    SET_ADC_DAC_GAIN               =  0xE1,
-    SET_PARA                       =  0xE2
-};
-
-enum set_para_e {
-    DAC_VOLT                        = 0x01,
-};
-
-enum dev_para_e {
-    VERSION_DEV_TEST                = 0x01,
-    BAT_DEV_TEST                    = 0x02,
-    TEMP_DEV_TEST                   = 0x03,
-    LED_DEV_TEST                    = 0x04,
-};
-
-
-// CIS (control instruction)
-#define CIS_VERSION                     0x40
-#define CIS_VOLT                        0x10
-#define CIS_TEMPERATURE                 0x80
-
-// mode parameter
-#define STEP_TO_VSETRATE(step)   step2VsetRate(step)
-#define VMAX(v1,v2)              ((v1 >= v2) ? v1 : v2)
-#define VMIN(v1,v2)              ((v1 < v2)  ? v1 : v2)
-#define VDIRECTION(v1,v2)        ((v1 > v2)  ?  0 : 1)
-#define AFTER_READ_I             0
-#define AFTER_READ_V             1
-
-//Elite LED
-#define COLOR_BLACK              0x00
-#define COLOR_RED                0x01
-#define COLOR_ORANGE             0x02
-#define COLOR_YELLOW             0x03
-#define COLOR_GREEN              0x04
-#define COLOR_BLUE               0x05
-#define COLOR_CYAN               0x06
-#define COLOR_MAGENTA            0x07
-#define COLOR_PURPLE             0x08
-#define COLOR_WHITE              0x09           
-#define COLOR_YELLOWGREEN        0x0A
-#define COLOR_EMERALD            0x0B
-#define COLOR_YELLOW_DARK        0xF3
-#define COLOR_GREEN_DARK         0xF4
-#define COLOR_BLUE_DARK          0xF5
-#define COLOR_CYAN_DARK          0xF6
-#define COLOR_PURPLE_DARK        0xF8
-
-
-#define BT_WAIT                  0x01
-#define NO_EVENT                 0x02
-#define PRE_WORK                 0x03
-#define WORKING                  0x04
-#define POST_WORK                0x05
-
-#define VALUE_ZERO_TO_ONE(_v)    (_v == 0) ? 1 : _v
-
-//plot_type
-#define IT_PLOT             1
-#define VT_PLOT             2
-#define VOUT_PLOT           3
-#define IIN_VIN_PLOT        4
-#define IIN_VIN_VOUT_PLOT   5
-
-#define CLOCK_ONE_SECOND 10000
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_mode_ADC_DAC.h

@@ -1,906 +0,0 @@
-#ifndef ELITE_MODE_ADC_DAC
-#define ELITE_MODE_ADC_DAC
-
-#define Vset instru.Vset
-
-static void volt_out() {
-    static uint16_t DACOutCode;
-    static int32_t DeltaVout;
-
-    if (DACReset) {
-        instru.Vout = Vset;
-    } else {
-        DeltaVout = Vset - (instru.Vout);
-        instru.Vout = instru.Vout + DeltaVout;
-    }
-
-
-    if (instru.Vout >= 1100000000) { //1100000000 = 5.5V
-        instru.Vout = 1100000000;
-    } else if (instru.Vout <= -1000000000) {  //-1000000000 = -5V
-        instru.Vout = -1000000000;
-    }
-
-    instru.VoltConstant = instru.Vout / 40000 + 25000; //5nV=>usercode
-    DACOutCode = Usercode_Correction_to_DAC(instru.VoutGainLv, instru.VoltConstant);
-    DAC0_W_T(DACOutCode);
-    return;
-}
-
-static void vscan_volt_out(void)
-{
-    void *wm = wm_get();
-    uint16_t DACOutCode;
-    int32_t DeltaVout;
-    int32_t Vin;
-
-    Vin = MEAS_VIN(wm) * 200;//[5nV]
-
-    if (DACReset) {
-        instru.Vout = Vset + Vin;
-    } else {
-        DeltaVout = Vset - (instru.Vout - Vin);
-        instru.Vout = instru.Vout + DeltaVout;
-    }
-
-    instru.VoltConstant = instru.Vout / 40000 + 25000;//5nV=>usercode
-    DACOutCode = Usercode_Correction_to_DAC(instru.VoutGainLv, instru.VoltConstant);
-    DAC0_W_T(DACOutCode);
-    return;
-}
-
-static void CalcuResistance()
-{
-    /* Elite 100000 = 100R
-       Elite 1000000 = 1KR
-       Elite 10000000 = 10KR
-       Elite 100000000 = 100KR
-       Elite 1000000000 = 1MR
-     */
-
-    struct wm_rt_ctx_t *rt = (struct wm_rt_ctx_t *)wm_get();
-    struct wm_meas_t *m = &rt->measure;
-    int64_t resist;
-    int64_t volt = instru.Vout / 200; // [uV]
-    int64_t current = (int64_t)(m->_measureCurrent);
-
-    resist = volt * 1000000 / current; //R = V / Iin; [mOhm]
-    InputNotify(NOTIFY_IMPEDANCE, resist);
-}
-
-static void DACenable(uint8_t afterRead){
-    void *wm = wm_get();
-
-    if (afterRead == AFTER_READ_I) {
-        switch (instru.eliteFxn) {
-            case CURVE_CC:
-                cc_vscan();
-                volt_out();
-                break;
-
-            case CURVE_UNI_PULSE:
-                volt_out();
-                break;
-
-            default:
-                break;
-        }
-    } else if (afterRead == AFTER_READ_V) {
-        switch (instru.eliteFxn) {
-            case CURVE_IV_CY:
-            case CURVE_IV:
-            case CURVE_IT:
-            case CURVE_VO:
-                volt_out();
-                break;
-
-            case CURVE_RT:
-                volt_out();
-                CalcuResistance();
-                break;
-
-            case CURVE_CV:
-            case CURVE_CA:
-            case CURVE_LSV:
-            case CURVE_DPV:
-            case CURVE_DPV_SMPRATE:
-            case CURVE_DPV_ADVANCE:
-            case CURVE_DPV_ADVANCE_SMPRATE:
-                vscan_volt_out();
-                break;
-
-            default:{
-                break;
-            }
-        }
-    }
-}
-
-/*
- * define how long damping time for manual current stalls, to skip damping time
- * any level switch to 0 level has 80ms damping time
- * any level switch to 1 level has 20ms damping time
- * any level switch to 2 level has 10ms damping time
- * any level switch to 3 level has 10ms damping time
- */
-#define CNT_TO_I_GAIN_3M_IIN_VIN_VOUT_PLOT      7   // 7 * 12ms = 84ms
-#define CNT_TO_I_GAIN_100K_IIN_VIN_VOUT_PLOT    2   // 2 * 12ms = 24ms
-#define CNT_TO_I_GAIN_3K_IIN_VIN_VOUT_PLOT      5   // 5 * 12ms = 60ms
-#define CNT_TO_I_GAIN_100R_IIN_VIN_VOUT_PLOT    5   // 5 * 12ms = 60ms
-
-#define CNT_TO_I_GAIN_3M_IIN_VIN_PLOT           10  // 10 * 8ms = 80ms
-#define CNT_TO_I_GAIN_100K_IIN_VIN_PLOT         3   // 3 * 8ms = 24ms
-#define CNT_TO_I_GAIN_3K_IIN_VIN_PLOT           5   // 5 * 8ms = 40ms
-#define CNT_TO_I_GAIN_100R_IIN_VIN_PLOT         5   // 5 * 8ms = 40ms
-
-#define CNT_TO_I_GAIN_3M_IT_PLOT                20  // 20 * 4ms = 80ms
-#define CNT_TO_I_GAIN_100K_IT_PLOT              5   // 5 * 4ms = 20ms
-#define CNT_TO_I_GAIN_3K_IT_PLOT                5   // 5 * 4ms = 20ms
-#define CNT_TO_I_GAIN_100R_IT_PLOT              5   // 5 * 4ms = 20ms
-
-static void read_Iin_change_gain(uint16_t plot_type)
-{
-    /*  read Iin and cali value save as MEAS_CURR(wm)
-     *  if auto gain:
-     *      do NOT record the Iin after changing gain, time is according to damping time
-     *  if static gain:
-     *      change gain if gain is different from last gain
-     */
-    uint16_t plot = plot_type;
-    static uint16_t no_rec_time = 0;
-    static uint8_t cnt = 0;
-    void *wm = wm_get();
-
-    if (instru.IinADCAutoGainEn > 1)
-        return;
-
-    ADC_rxbuf = MEASURE_CURRENT();
-    MEAS_CURR(wm) = DecodeADCValue(instru.IinADCGainLv, RIS_ADC_IIN, ADC_rxbuf);
-
-    if (instru.IinADCAutoGainEn) {
-        AutoGainChangeIin(MEAS_CURR(wm), plot, &no_rec_time);
-
-    } else {
-        if (lastIinADCGainLevel != instru.IinADCGainLv) {
-            IinADCGainCtrl(instru.IinADCGainLv);
-
-            if (plot_type == IT_PLOT) {
-                if (instru.IinADCGainLv == I_GAIN_3K) {
-                    no_rec_time = CNT_TO_I_GAIN_3K_IT_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_100K) {
-                    no_rec_time = CNT_TO_I_GAIN_100K_IT_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_3M) {
-                    no_rec_time = CNT_TO_I_GAIN_3M_IT_PLOT;
-                } else {
-                    no_rec_time = CNT_TO_I_GAIN_100R_IT_PLOT;
-                }
-            }
-
-            if (plot_type == IIN_VIN_PLOT) {
-                if (instru.IinADCGainLv == I_GAIN_3K) {
-                    no_rec_time = CNT_TO_I_GAIN_3K_IIN_VIN_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_100K) {
-                    no_rec_time = CNT_TO_I_GAIN_100K_IIN_VIN_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_3M) {
-                    no_rec_time = CNT_TO_I_GAIN_3M_IIN_VIN_PLOT;
-                } else {
-                    no_rec_time = CNT_TO_I_GAIN_100R_IIN_VIN_PLOT;
-                }
-            }
-
-            if (plot_type == IIN_VIN_VOUT_PLOT) {
-                if (instru.IinADCGainLv == I_GAIN_3K) {
-                    no_rec_time = CNT_TO_I_GAIN_3K_IIN_VIN_VOUT_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_100K) {
-                    no_rec_time = CNT_TO_I_GAIN_100K_IIN_VIN_VOUT_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_3M) {
-                    no_rec_time = CNT_TO_I_GAIN_3M_IIN_VIN_VOUT_PLOT;
-                } else {
-                    no_rec_time = CNT_TO_I_GAIN_100R_IIN_VIN_VOUT_PLOT;
-                }
-            }
-        }
-    }
-
-    if (curr_rec_en == false) {
-        cnt++;
-    }
-
-    if (cnt >= no_rec_time) {
-        curr_rec_en = true;
-        cnt = 0;
-    }
-
-    return;
-}
-
-static void read_Vin_change_gain(void)
-{
-    static uint8_t rec_cnt = 0;
-    void *wm = wm_get();
-
-    if (instru.IinADCAutoGainEn > 1)
-        return;
-
-    /* read Vin and do NOT record the Vin after changing gain twice */
-    ADC_rxbuf = MEASURE_VOLT();
-    MEAS_VIN(wm) = DecodeADCValue(instru.VinADCGainLv, RIS_ADC_VIN, ADC_rxbuf);
-    if (instru.VinADCAutoGainEn) {
-        AutoGainChangeVin(MEAS_VIN(wm));
-    } else {
-        if (lastVinADCGainLv != instru.VinADCGainLv) {
-            VinADCGainCtrl(instru.VinADCGainLv);
-        }
-    }
-
-    if (volt_rec_en == false) {
-        rec_cnt++;
-    }
-
-    if (rec_cnt == 2) {
-        volt_rec_en = true;
-        rec_cnt = 0;
-    }
-
-    return;
-}
-
-static void read_Vout_change_gain(void)
-{
-    static uint8_t rec_cnt = 0;
-    void *wm = wm_get();
-
-    /* read Vout and do NOT record the Vout after changing gain twice */
-    ADC_rxbuf = MEASURE_DAC();
-    MEAS_VOUT(wm) = DecodeADCValue(0, RIS_ADC_VOUT, ADC_rxbuf);
-
-    if (volt_rec_en == false) {
-        rec_cnt++;
-    }
-
-    if (rec_cnt == 2) {
-        volt_rec_en = true;
-        rec_cnt = 0;
-    }
-
-    return;
-}
-
-void EliteCalcAvg(uint32_t time)
-{
-    struct wm_uni_pulse_ctx_t *p = (struct wm_uni_pulse_ctx_t *)wm_get();
-    struct wm_meas_t *meas = &p->measure;
-    static uint32_t cnt = 0;
-    static int64_t curr_sum = 0;
-    int64_t curr_avg = 0;
-    uint32_t m;
-    uint32_t t = time;
-
-    m = t % p->_t_period;
-
-    if (calc_avg_en) {
-        cnt++;
-        curr_sum = curr_sum + meas->_measureCurrent;
-
-    } else {
-        curr_avg = curr_sum / cnt;
-        if (cnt == 0) {
-
-            return;
-        }
-
-        if (m < p->_t_pa[0]) {
-            InputNotify(NOTIFY_CURRENT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[1]) {
-            InputNotify(NOTIFY_VOLT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[2]) {
-
-        } else if (m < p->_t_pa[3]) {
-
-        }
-
-        cnt = 0;
-        curr_sum = 0;
-        curr_avg = 0;
-    }
-
-
-    return;
-}
-
-void dpv_EliteCalcAvg(uint32_t time)
-{
-    struct wm_dpv_ctx_t *p = (struct wm_dpv_ctx_t *)wm_get();
-    struct wm_meas_t *meas = &p->measure;
-    static uint32_t cnt = 0;
-    static int64_t curr_sum = 0;
-    int64_t curr_avg = 0;
-    uint32_t m;
-    uint32_t t = time;
-
-    m = t % p->_t_period;
-    static bool first_v_rec = true;
-
-    if (calc_avg_en) {
-        cnt++;
-        curr_sum = curr_sum + meas->_measureCurrent;
-        if (first_v_rec) {
-            InputNotify(NOTIFY_VOLT, instru.Vout/200 - meas->_measureVin);
-            InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            first_v_rec = false;
-        }
-
-    } else {
-        first_v_rec = true;
-        curr_avg = curr_sum / cnt;
-        if (cnt == 0) {
-
-            return;
-        }
-
-        if (m < p->_t_pa[0]) {
-            InputNotify(NOTIFY_CURRENT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[1]) {
-            InputNotify(NOTIFY_CURRENT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[2]) {
-
-        } else if (m < p->_t_pa[3]) {
-
-        }
-
-        cnt = 0;
-        curr_sum = 0;
-        curr_avg = 0;
-    }
-
-
-    return;
-}
-
-void dpv_advance_EliteCalcAvg(uint32_t time)
-{
-    struct wm_dpv_advance_ctx_t *p = (struct wm_dpv_advance_ctx_t *)wm_get();
-    struct wm_meas_t *meas = &p->measure;
-    static uint32_t cnt = 0;
-    static int64_t curr_sum = 0;
-    int64_t curr_avg = 0;
-    uint32_t m;
-    uint32_t t = time;
-
-    m = t % p->_t_period;
-    static bool first_v_rec = true;
-
-    if (calc_avg_en) {
-        cnt++;
-        curr_sum = curr_sum + meas->_measureCurrent;
-        if (first_v_rec) {
-            InputNotify(NOTIFY_VOLT, instru.Vout/200 - meas->_measureVin);
-            InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            first_v_rec = false;
-        }
-
-    } else {
-        first_v_rec = true;
-        curr_avg = curr_sum / cnt;
-        if (cnt == 0) {
-
-            return;
-        }
-
-        if (m < p->_t_pa[0]) {
-            InputNotify(NOTIFY_CURRENT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[1]) {
-            InputNotify(NOTIFY_CURRENT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[2]) {
-
-        } else if (m < p->_t_pa[3]) {
-
-        }
-
-        cnt = 0;
-        curr_sum = 0;
-        curr_avg = 0;
-    }
-
-
-    return;
-}
-
-static void Iin_Vin_Vout_Plot(uint32_t time)
-{
-    static uint8_t ADC_cnt = 0;
-    void *wm = wm_get();
-    uint32_t t = time;
-    bool read_adc_flag = false;
-
-    /* the time for measuring battery */
-    if (batteryCheck_flag && tempCheck_flag) {
-        read_adc_flag = EliteADCBattery();
-        if (!read_adc_flag) {
-            ADC_rxbuf = MEASURE_CURRENT();
-            ADC_cnt = 5;
-        }
-
-        return;
-    }
-
-    /* the time for Not measuring battery */
-    /* ADC_cnt:  0 - read Iin and do NOT buffer the Iin after changing gain twice,
-     *               and output DAC, and read Vin, and increase ADC_cnt
-     *           1 - read Vin and increase ADC_cnt
-     *           2 - read Vin and do NOT buffer the Vin after changing gain twice,
-     *               and output DAC, and read Vout, and increase ADC_cnt
-     *           3 - read Vout and increase ADC_cnt
-     *           4 - read Vout and do NOT buffer the Vout after changing gain twice,
-     *               and output DAC, and read Iin, and increase ADC_cnt
-     *           5 - read Iin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        read_Iin_change_gain(IIN_VIN_VOUT_PLOT);
-
-        if (instru.eliteFxn == CURVE_DPV && vscanReset == false) {
-            dpv_EliteCalcAvg(t);
-        }
-        else if (instru.eliteFxn == CURVE_DPV_ADVANCE && vscanReset == false) {
-            dpv_advance_EliteCalcAvg(t);
-        }
-
-        DACenable(AFTER_READ_I);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 1) {
-        ADC_rxbuf = MEASURE_VOLT();
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 2) {
-        read_Vin_change_gain();
-        DACenable(AFTER_READ_V);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 3) {
-        ADC_rxbuf = MEASURE_DAC();
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 4) {
-        read_Vout_change_gain();
-        DACenable(AFTER_READ_V);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 5) {
-        ADC_rxbuf = MEASURE_CURRENT();
-        ADC_cnt = 0;
-    }
-
-    return;
-}
-
-static void Iin_Vin_Plot(void)
-{
-    static uint8_t ADC_cnt = 0;
-    void *wm = wm_get();
-    bool read_adc_flag = false;
-
-    /* the time for measuring battery */
-    if (batteryCheck_flag && tempCheck_flag) {
-        read_adc_flag = EliteADCBattery();
-        if (!read_adc_flag) {
-            ADC_rxbuf = MEASURE_CURRENT();
-            ADC_cnt = 3;
-        }
-
-        return;
-    }
-
-    /* the time for Not measuring battery */
-    /* ADC_cnt:  0 - read Iin and do NOT buffer the Iin after changing gain twice,
-     *               and output DAC, and read Vin, and increase ADC_cnt
-     *           1 - read Vin and increase ADC_cnt
-     *           2 - read Vin and do NOT buffer the Vin after changing gain twice,
-     *               and output DAC, and read Iin, and increase ADC_cnt
-     *           3 - read Iin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        read_Iin_change_gain(IIN_VIN_PLOT);
-        DACenable(AFTER_READ_I);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 1) {
-        ADC_rxbuf = MEASURE_VOLT();
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 2) {
-        read_Vin_change_gain();
-        DACenable(AFTER_READ_V);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 3) {
-        ADC_rxbuf = MEASURE_CURRENT();
-        ADC_cnt = 0;
-    }
-
-    return;
-}
-
-static void IT_Plot(uint32_t time)
-{
-    static uint8_t ADC_cnt = 0;
-    void *wm = wm_get();
-    uint32_t t = time;
-    bool read_adc_flag = false;
-
-    /* measure battery if needs */
-    batteryCheck_flag = false;
-    tempCheck_flag = false;
-
-    if (batteryCheck_flag || tempCheck_flag) {
-        read_adc_flag = EliteADCBattery();
-        if (!read_adc_flag) {
-            ADC_rxbuf = MEASURE_CURRENT();
-            ADC_cnt = 1;
-        }
-
-        return;
-    }
-
-    /* ADC_cnt:  0 - read Iin and do NOT buffer the Iin after changing gain twice, read Iin and increase ADC_cnt
-     *           1 - read Iin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        ADC_rxbuf = MEASURE_CURRENT();
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        read_Iin_change_gain(IT_PLOT);
-
-        if (instru.eliteFxn == CURVE_UNI_PULSE && vscanReset == false) {
-            EliteCalcAvg(t);
-        }
-
-        DACenable(AFTER_READ_I);
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-
-}
-
-static void VT_Plot(void)
-{
-    static uint8_t ADC_cnt = 0;
-    void *wm = wm_get();
-
-    /* measure battery if needs */
-    if (batteryCheck_flag && tempCheck_flag) {
-        EliteADCBattery();
-        if (!batteryCheck_flag) {
-            ADC_rxbuf = MEASURE_VOLT();
-            ADC_cnt = 1;
-        }
-
-        return;
-    }
-
-    /* ADC_cnt:  0 - read Vin and do NOT buffer the Vin after changing gain twice, read Vin and increase ADC_cnt
-     *           1 - read Vin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        ADC_rxbuf = MEASURE_VOLT();
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        read_Vin_change_gain();
-        DACenable(AFTER_READ_V);
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-}
-
-static void Vout_Plot(void)
-{
-    static uint8_t ADC_cnt = 0;
-    void *wm = wm_get();
-
-    /* measure battery if needs */
-    if (batteryCheck_flag && tempCheck_flag) {
-        EliteADCBattery();
-        if (!batteryCheck_flag) {
-            ADC_rxbuf = MEASURE_DAC();
-            ADC_cnt = 1;
-        }
-
-        return;
-    }
-
-    /* ADC_cnt:  0 - read Vout and do NOT buffer the Vout after changing gain twice, read Vout and increase ADC_cnt
-     *           1 - read Vout and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        ADC_rxbuf = MEASURE_DAC();
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        read_Vout_change_gain();
-        DACenable(AFTER_READ_V);
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-}
-
-static void cali_IT_plot(void) {
-    void *wm = wm_get();
-
-    static int32_t ADCValueSUM = 0;
-    static uint16_t cali_count = 0;
-    static uint8_t ADC_cnt = 0;
-    static uint8_t rec_cnt = 0;
-    static uint16_t cali_count_max = 1000;
-    int32_t ADCValueAVG = 0;
-
-    /* ADC_cnt:  0 - read Iin and do NOT buffer the Iin after changing gain twice
-     *           1 - read Iin and increase ADC_cnt
-     *           2 - read Iin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        if (instru.IinADCAutoGainEn) {
-            MEAS_CURR(wm) = 0xFFFF;
-        } else {
-            ADC_rxbuf = MEASURE_CURRENT();
-            MEAS_CURR(wm) = (int32_t) ADC_rxbuf;
-            if (lastIinADCGainLevel != instru.IinADCGainLv) {
-                IinADCGainCtrl(instru.IinADCGainLv);
-            }
-        }
-
-        if (instru.IinADCGainLv == 0) {
-            cali_count_max = 5000;
-        } else {
-            cali_count_max = 1000;
-        }
-
-        if (curr_rec_en == false) {
-            rec_cnt++;
-        } else {
-            if (cali_count >= cali_count_max) {
-                ADCValueAVG = ADCValueSUM / cali_count;
-
-                InputNotify(NOTIFY_CURRENT, ADCValueAVG);
-                SendNotify();
-
-                uint8_t CIS_buf[9]   = {0};
-                CIS_buf[0] = 5; //data len
-                CIS_buf[1] = instru.chip_id;
-                CIS_buf[2] = (uint8_t) ((ADCValueAVG & 0xFF00) >> 8);
-                CIS_buf[3] = (uint8_t) (ADCValueAVG & 0x00FF);
-                CIS_buf[4] = 0x00;
-                CIS_buf[5] = instru.IinADCGainLv;
-                SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, 9, CIS_buf);
-
-                PeriodicEvent = false;
-                ADCValueSUM = 0;
-                cali_count = 0;
-                ModeLED(NO_EVENT);
-            } else {
-                cali_count++;
-                ADCValueSUM = ADCValueSUM + MEAS_CURR(wm);
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-                InputNotify(NOTIFY_VOLT, ADCValueSUM);
-                InputNotify(NOTIFY_IMPEDANCE, (int32_t)cali_count);
-            }
-        }
-
-        if (rec_cnt == 2) {
-            curr_rec_en = true;
-            rec_cnt = 0;
-        }
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        ADC_rxbuf = MEASURE_CURRENT();
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 2) {
-        ADC_rxbuf = MEASURE_CURRENT();
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-}
-
-static void cali_VT_plot(void) {
-    void *wm = wm_get();
-
-    static int32_t ADCValueSUM = 0;
-    static uint16_t cali_count = 0;
-    static uint8_t ADC_cnt = 0;
-    static uint8_t rec_cnt = 0;
-    uint16_t cali_count_max = 0;
-    int32_t ADCValueAVG = 0;
-
-    /* ADC_cnt:  0 - read Vin and do NOT buffer the Vin after changing gain twice
-     *           1 - read Vin and increase ADC_cnt
-     *           2 - read Vin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        if (instru.VinADCAutoGainEn) {
-            MEAS_VIN(wm) = 0xFFFF;
-        } else {
-            ADC_rxbuf = MEASURE_VOLT();
-            MEAS_VIN(wm) = (int32_t) ADC_rxbuf;
-            if (lastVinADCGainLv != instru.VinADCGainLv) VinADCGainCtrl(instru.VinADCGainLv);
-        }
-
-        if (instru.VinADCGainLv == 0) {
-            cali_count_max = 5000;
-        } else {
-            cali_count_max = 1000;
-        }
-
-        if (volt_rec_en == false) {
-           rec_cnt++;
-        } else {
-            if (cali_count >= cali_count_max) {
-                ADCValueAVG = ADCValueSUM / cali_count;
-
-                InputNotify(NOTIFY_VOLT, ADCValueAVG);
-                SendNotify();
-
-                uint8_t CIS_buf[9]   = {0};
-                CIS_buf[0] = 5; //data len
-                CIS_buf[1] = instru.chip_id;
-                CIS_buf[2] = (uint8_t) ((ADCValueAVG & 0xFF00) >> 8);
-                CIS_buf[3] = (uint8_t) (ADCValueAVG & 0x00FF);
-                CIS_buf[4] = 0x00;
-                CIS_buf[5] = instru.VinADCGainLv;
-                SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, 9, CIS_buf);
-
-                PeriodicEvent = false;
-                ADCValueSUM = 0;
-                cali_count = 0;
-                ModeLED(NO_EVENT);
-            } else {
-                cali_count++;
-                ADCValueSUM = ADCValueSUM + MEAS_VIN(wm);
-                InputNotify(NOTIFY_VOLT, MEAS_VIN(wm));
-                InputNotify(NOTIFY_CURRENT, ADCValueSUM);
-                InputNotify(NOTIFY_IMPEDANCE, (int32_t)cali_count);
-            }
-        }
-
-        if (rec_cnt == 2) {
-            volt_rec_en = true;
-            rec_cnt = 0;
-        }
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        ADC_rxbuf = MEASURE_VOLT();
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 2) {
-        ADC_rxbuf = MEASURE_VOLT();
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-}
-static void cali_Vout_plot(void) {
-    void *wm = wm_get();
-
-    static int32_t ADCValueSUM = 0;
-    static uint16_t cali_count = 0;
-    static uint8_t ADC_cnt = 0;
-    static uint8_t rec_cnt = 0;
-    uint16_t cali_count_max = 1000;
-    int32_t ADCValueAVG = 0;
-
-    /* ADC_cnt:  0 - read Vin and do NOT buffer the Vin after changing gain twice
-     *           1 - read Vin and increase ADC_cnt
-     *           2 - read Vin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-
-        ADC_rxbuf = MEASURE_DAC();
-        MEAS_VOUT(wm) = (int32_t) ADC_rxbuf;
-
-        if (volt_rec_en == false) {
-           rec_cnt++;
-        } else {
-            if (cali_count >= cali_count_max) {
-                ADCValueAVG = ADCValueSUM / cali_count;
-
-                InputNotify(NOTIFY_VOLT, ADCValueAVG);
-                SendNotify();
-
-                uint8_t CIS_buf[9]   = {0};
-                CIS_buf[0] = 5; //data len
-                CIS_buf[1] = instru.chip_id;
-                CIS_buf[2] = (uint8_t) ((ADCValueAVG & 0xFF00) >> 8);
-                CIS_buf[3] = (uint8_t) (ADCValueAVG & 0x00FF);
-                CIS_buf[4] = 0x00;
-                CIS_buf[5] = instru.VinADCGainLv;
-                SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, 9, CIS_buf);
-
-                PeriodicEvent = false;
-                ADCValueSUM = 0;
-                cali_count = 0;
-                ModeLED(NO_EVENT);
-            } else {
-                cali_count++;
-                ADCValueSUM = ADCValueSUM + MEAS_VOUT(wm);
-                InputNotify(NOTIFY_VOLT, MEAS_VOUT(wm));
-                InputNotify(NOTIFY_CURRENT, ADCValueSUM);
-                InputNotify(NOTIFY_IMPEDANCE, (int32_t)cali_count);
-            }
-        }
-
-        if (rec_cnt == 2) {
-            volt_rec_en = true;
-            rec_cnt = 0;
-        }
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        ADC_rxbuf = MEASURE_DAC();
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 2) {
-        ADC_rxbuf = MEASURE_DAC();
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_version.h

@@ -2,11 +2,11 @@
 #ifndef VERSION_DATE
 #define VERSION_DATE
 
-#define VERSION_DATE_YEAR      22
-#define VERSION_DATE_MONTH     8
-#define VERSION_DATE_DAY       2
-#define VERSION_DATE_HOUR      11
-#define VERSION_DATE_MINUTE    33
+#define VERSION_DATE_YEAR      23
+#define VERSION_DATE_MONTH     12
+#define VERSION_DATE_DAY       4
+#define VERSION_DATE_HOUR      16
+#define VERSION_DATE_MINUTE    46
 
 // this is NOT the version hash !!
 // it's the last version hash

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/impedance_meter.h

@@ -1,682 +0,0 @@
-/*
- * impedance_meter.h
- *
- *  Created on: 2019/01/15
- *      Author: benny
- */
-#ifndef HEADSTAGE_H
-#error "headstage.h not include"
-#endif
-
-#ifdef HEADSTAGE_H_H
-#error "headstage_*.h has be included"
-#endif
-
-#ifndef IMPEDANCE_METER_H_
-#define HEADSTAGE_H_H
-#define IMPEDANCE_METER_H_
-
-// header
-#include "EliteWorkData.h"
-
-
-static void device_init(void)
-{
-    gpio_create();
-    InitEliteInstruction();
-
-    update_latch_stat(E_LATCH_CS_MEM, 1);
-    update_latch_stat(E_LATCH_CS_ADC, 1);
-    update_latch_stat(E_LATCH_CS_DAC, 1);
-    update_latch_stat(E_LATCH_OFF, 1);  // E_LATCH_OFF = 1 => turn off 6994
-    latch_multi_ctrl();
-
-    /* when elite open, must change vin level,
-            measure battery value will be right */
-    IinADCGainCtrl(instru.IinADCGainLv);
-    VinADCGainCtrl(instru.VinADCGainLv);   
-    VoutGainControl(instru.VoutGainLv);
-    DAC0_W_T(Usercode_Correction_to_DAC(instru.VoutGainLv, 25000));
-
-    elite_gptimer_open();
-    InitGPT();
-    
-    return;
-}
-
-#define IsPeriodicMode() (                       \
-(instru.eliteFxn == CURVE_IV)                 || \
-(instru.eliteFxn == CURVE_IV_CY)              || \
-(instru.eliteFxn == CURVE_IT)                 || \
-(instru.eliteFxn == CURVE_VT)                 || \
-(instru.eliteFxn == CURVE_RT)                 || \
-(instru.eliteFxn == CURVE_CC)                 || \
-(instru.eliteFxn == CURVE_CV)                 || \
-(instru.eliteFxn == CURVE_LSV)                || \
-(instru.eliteFxn == CURVE_CA)                 || \
-(instru.eliteFxn == CURVE_VO)                 || \
-(instru.eliteFxn == CURVE_OCP)                || \
-(instru.eliteFxn == CURVE_CALI_ADC)              \
-)
-
-#define Ve1MatchVe2Mode() (                      \
-(instru.eliteFxn == CURVE_IV)                 || \
-(instru.eliteFxn == CURVE_IV_CY)              || \
-(instru.eliteFxn == CURVE_CV)                 || \
-(instru.eliteFxn == CURVE_LSV)                   \
-)
-
-static void peri_mode(void)
-{
-
-
-    GPT.cnt_lead_time = GPT.cnt_lead_time + GPT.cnt_gpt_delta;
-    if (leadTimeReset && GPT.cnt_lead_time <= 2000) {
-        vscanReset = true;
-        if (first_highz_flag && GPT.cnt_lead_time >= 1000) {
-            if (instru.eliteFxn == CURVE_OCP) {
-                latch_single_ctrl(E_LATCH_HIGH_Z, instru.hign_z_en); // HIGH Z MODE // 1: close; 0: open;
-            } else {
-                latch_single_ctrl(E_LATCH_HIGH_Z, instru.hign_z_en); // HIGH Z MODE // 1: close; 0: open;
-            }
-            first_highz_flag = false;
-        }
-    } else {
-        if (notifyFirst_flag) {
-            GPT.cnt_notify_rate = instru.notifyRate - 20;
-            notifyFirst_flag = false;
-        }
-        vscanReset = false;
-        leadTimeReset = false;
-    }
-
-    //vscan counter
-    GPT.cnt_v_scan_rate = GPT.cnt_v_scan_rate + GPT.cnt_gpt_delta;
-    if (GPT.cnt_v_scan_rate >= instru.VsetRate) {
-        if (GPT.cnt_v_scan_rate >= instru.VsetRate * 2) {
-            GPT.GptimerMultiple = GPT.cnt_v_scan_rate / instru.VsetRate;
-        } else {
-            GPT.GptimerMultiple = 1;
-        }
-        GPT.cnt_v_scan_rate -= instru.VsetRate * GPT.GptimerMultiple; //To get right time
-        vscan_ctrl(0);
-    }
-
-    //battery counter
-    GPT.BatteryADCCounter = GPT.BatteryADCCounter + GPT.cnt_gpt_delta;
-    GPT.BatteryCheckCounter = GPT.BatteryCheckCounter + GPT.cnt_gpt_delta;
-    if(GPT.BatteryCheckCounter >= 50000){
-        GPT.BatteryCheckCounter -= 50000; //To get right time
-        batteryCheck_flag = true;
-        tempCheck_flag = true;
-        if ((instru.eliteFxn == CURVE_IV) ||
-                (instru.eliteFxn == CURVE_IV_CY) ||
-                (instru.eliteFxn == CURVE_CC) ||
-                (instru.eliteFxn == CURVE_CV) ||
-                (instru.eliteFxn == CURVE_LSV) ||
-                (instru.eliteFxn == CURVE_CA) ||
-                (instru.eliteFxn == CURVE_OCP) ||
-                (instru.eliteFxn == CURVE_UNI_PULSE) ||
-                (instru.eliteFxn == CURVE_DPV) ||
-                (instru.eliteFxn == CURVE_DPV_SMPRATE) ||
-                (instru.eliteFxn == CURVE_DPV_ADVANCE) ||
-                (instru.eliteFxn == CURVE_DPV_ADVANCE_SMPRATE) ||
-                (instru.eliteFxn == CURVE_CALI_ADC)) {
-            batteryCheck_flag = false;
-            tempCheck_flag = false;
-
-        }
-    }
-
-    uint16_t bat = NotifyVoltBat;
-    if( bat < 768 && bat > 20){
-//            latch_single_ctrl(E_LATCH_5V_ENABLE, 0);
-    }
-
-    //ADC counter
-    GPT.cnt_adc_rate = GPT.cnt_adc_rate + GPT.cnt_gpt_delta;
-    if(GPT.cnt_adc_rate >= instru.sampleRate){
-        GPT.cnt_adc_rate = 0; //To get right data, ADC must be delay 1.5ms
-        EliteADCControl(0);
-    }
-
-    // Over temperature protection
-    uint16_t CC2650temp = NotifyTemperature;
-    if(CC2650temp > 40) {
-        latch_single_ctrl(E_LATCH_5V_ENABLE, 0);
-    }
-
-    //Notify counter(Notify control, check if we need to send notify)
-    //please don't put Notify counter before ADC counter, maybe get wrong data
-    GPT.cnt_notify_rate = GPT.cnt_notify_rate + GPT.cnt_gpt_delta;
-    if(GPT.cnt_notify_rate >= instru.notifyRate){
-        GPT.cnt_notify_rate -= instru.notifyRate; //To get right time
-        notify_flag = true;
-        if(vscanReset){
-            notify_flag = false;
-        }
-
-        if (!volt_rec_en || !curr_rec_en) {
-            notify_flag = false;
-        }
-
-        if(notify_flag){
-            SendNotify();
-            notify_flag = false;
-        }
-    }
-
-    mode_done();
-
-}
-
-static void uni_pulse_mode(void)
-{
-    // Default working flow is vscan -> ADC read -> send notify
-    // We will need a flag to control vscan, ADC and notify
-
-    GPT.cnt_lead_time = GPT.cnt_lead_time + GPT.cnt_gpt_delta;
-    if (leadTimeReset && GPT.cnt_lead_time <= 2000) {
-        vscanReset = true;
-        GPT.cnt_v_scan_rate = 0xFFFFFFFF;
-        dpv_step_cnt = 0;
-        if (first_highz_flag && GPT.cnt_lead_time >= 1000) {
-            latch_single_ctrl(E_LATCH_HIGH_Z, instru.hign_z_en); // HIGH Z MODE // 1: close; 0: open;
-            first_highz_flag = false;
-        }
-    } else {
-        if (notifyFirst_flag) {
-            GPT.cnt_notify_rate = instru.notifyRate - 20;
-            notifyFirst_flag = false;
-        }
-        if (vscanReset) {
-            GPT.cnt_v_scan_rate = 0xFFFFFFFF;
-            dpv_step_cnt = 0;
-        }
-        vscanReset = false;
-        leadTimeReset = false;
-    }
-
-    //vscan counter
-    GPT.cnt_v_scan_rate = GPT.cnt_v_scan_rate + GPT.cnt_gpt_delta;
-    if (GPT.cnt_v_scan_rate >= instru.period) {
-        GPT.cnt_v_scan_rate -= instru.period; //To get right time
-        dpv_step_cnt +=1;
-    }
-    vscan_ctrl(GPT.cnt_v_scan_rate);
-
-    //battery counter
-    GPT.BatteryADCCounter = GPT.BatteryADCCounter + GPT.cnt_gpt_delta;
-    GPT.BatteryCheckCounter = GPT.BatteryCheckCounter + GPT.cnt_gpt_delta;
-    if(GPT.BatteryCheckCounter >= 50000){
-        GPT.BatteryCheckCounter -= 50000; //To get right time
-        batteryCheck_flag = true;
-        tempCheck_flag = true;
-
-        if ((instru.eliteFxn == CURVE_IV) ||
-                (instru.eliteFxn == CURVE_IV_CY) ||
-                (instru.eliteFxn == CURVE_CC) ||
-                (instru.eliteFxn == CURVE_CV) ||
-                (instru.eliteFxn == CURVE_LSV) ||
-                (instru.eliteFxn == CURVE_CA) ||
-                (instru.eliteFxn == CURVE_OCP) ||
-                (instru.eliteFxn == CURVE_UNI_PULSE) ||
-                (instru.eliteFxn == CURVE_DPV) ||
-                (instru.eliteFxn == CURVE_DPV_SMPRATE) ||
-                (instru.eliteFxn == CURVE_DPV_ADVANCE) ||
-                (instru.eliteFxn == CURVE_DPV_ADVANCE_SMPRATE) ||
-                (instru.eliteFxn == CURVE_CALI_ADC)) {
-            batteryCheck_flag = false;
-            tempCheck_flag = false;
-
-        }
-    }
-
-    //ADC counter
-    GPT.cnt_adc_rate = GPT.cnt_adc_rate + GPT.cnt_gpt_delta;
-    if(GPT.cnt_adc_rate >= instru.sampleRate){
-        GPT.cnt_adc_rate = 0; //To get right data, ADC must be delay 1.5ms
-        EliteADCControl(GPT.cnt_v_scan_rate);
-    }
-
-    uint16_t bat = NotifyVoltBat;
-    if( bat < 768 && bat > 20){
-//            latch_single_ctrl(E_LATCH_5V_ENABLE, 0);
-    }
-
-    // Over temperature protection
-    uint16_t CC2650temp = NotifyTemperature;
-    if(CC2650temp > 40) {
-        latch_single_ctrl(E_LATCH_5V_ENABLE, 0);
-    }
-
-    if (instru.eliteFxn == CURVE_DPV || instru.eliteFxn == CURVE_DPV_ADVANCE) {
-
-    } else {
-        //Notify counter(Notify control, check if we need to send notify)
-        //please don't put Notify counter before ADC counter, maybe get wrong data
-        GPT.cnt_notify_rate = GPT.cnt_notify_rate + GPT.cnt_gpt_delta;
-        if(GPT.cnt_notify_rate >= instru.notifyRate){
-            GPT.cnt_notify_rate -= instru.notifyRate; //To get right time
-            notify_flag = true;
-            if (instru.eliteFxn == CURVE_UNI_PULSE) {
-                notify_flag = false;
-            }
-            if(vscanReset){
-                notify_flag = false;
-            }
-
-            if (!volt_rec_en || !curr_rec_en) {
-                notify_flag = false;
-            }
-
-            if(notify_flag){
-                SendNotify();
-                notify_flag = false;
-            }
-        }
-    }
-
-
-    mode_done();
-
-}
-
-static void mode_init_set(void)
-{
-    batteryADC_flag = false;
-    volt_rec_en     = true;
-    curr_rec_en     = true;
-    firstTimeReset  = true;
-    notifyFirst_flag = true;
-    first_highz_flag = true;
-    DACReset          = true;
-    vscanReset        = true;
-    leadTimeReset     = true;
-
-    if (instru.notifyRate > 1000) {
-    // slow notify rate, < 10sps, auto gain changer only use ADC gain level = 1.2.3.4
-    // gain_switch_on: [1:4]: none
-    //                 [5]: ADC gain level = 4, if value = 1, gain 4 switch on
-    //                 [6]: ADC gain level = 3, if value = 1, gain 3 switch on
-    //                 [7]: ADC gain level = 2, if value = 1, gain 2 switch on
-    //                 [8]: ADC gain level = 1, if value = 1, gain 1 switch on
-        instru.gain_switch_on = 0b11110000;
-
-    } else {
-    // fast notify rate, >= 10sps, auto gain changer only use ADC gain level = 1.2.3
-        instru.gain_switch_on = 0b01110000;
-    }
-
-    VinADCGainCtrl(instru.VinADCGainLv);
-    IinADCGainCtrl(instru.IinADCGainLv);
-    VoutGainControl(instru.VoutGainLv);
-
-    if (Ve1MatchVe2Mode()) {
-        if (instru.Ve1 == instru.Ve2) {
-            DAC0_W_T(Usercode_Correction_to_DAC(instru.VoutGainLv, 25000));
-            PeriodicEvent = false;
-            latch_single_ctrl(E_LATCH_HIGH_Z, 0); // 0: open highz;
-            ModeLED(NO_EVENT);
-        }
-    }
-
-    return;
-}
-
-/*********************************************************************
- * @fn      SimpleBLEPeripheral_performPeriodicTask
- *
- * @brief   Control periodic event such as DAC out, ADC read, and send notify.
- *
- * @param   None.
- *
- * @return  None.
- */
-static void elite_task(void)
-{
-    // GPT_timerIncrement();
-
-    if (IsPeriodicMode()) {
-        if (mode_init) {
-            mode_init  = false;
-            mode_init_set();
-            InitGPT();
-            GPT.cnt_adc_rate = instru.sampleRate - 10;
-            GPT.cnt_v_scan_rate  = instru.VsetRate - 1;
-        }
-
-        peri_mode();
-
-        return;
-    }
-
-    if (instru.eliteFxn == CURVE_UNI_PULSE) {
-        if (mode_init) {
-            mode_init = false;
-            mode_init_set();
-            InitGPT();
-            calc_avg_en = false;
-        }
-
-        uni_pulse_mode();
-
-        return;
-    }
-
-    if (instru.eliteFxn == CURVE_DPV || instru.eliteFxn == CURVE_DPV_ADVANCE) {
-        if (mode_init) {
-            mode_init = false;
-            mode_init_set();
-            InitGPT();
-            calc_avg_en = false;
-        }
-
-        uni_pulse_mode();
-
-        return;
-    }
-
-    if (instru.eliteFxn == CURVE_DPV_SMPRATE || instru.eliteFxn == CURVE_DPV_ADVANCE_SMPRATE) {
-        if (mode_init) {
-            mode_init = false;
-            mode_init_set();
-            InitGPT();
-        }
-
-        uni_pulse_mode();
-
-        return;
-    }
-
-
-    return;
-}
-
-
-
-/*
- * EliteADCControl(): use ADC plot, and send what data to controller
- * +-----------------+-----------+-----------+-----------+
- * |      MODE       |    ch1    |    ch2    |    ch3    |
- * +-----------------+-----------+-----------+-----------+
- * | CURVE_IV        |    Iin    |    Vout   |    Vin    |
- * | CURVE_IV_CY     |    Iin    |    Vout   |    Vin    |
- * | CURVE_VO        |    Iin    |    Vout   |    Vin    |
- * | CURVE_RT        |    Iin    |    Vout   |     R     |
- * | CURVE_VT        |    Iin    |    Vin    |           |
- * | CURVE_IT        |    Iin    |    Vin    |    Vout   |
- * | CURVE_CC        |    Iin    |    Vin    |    Vout   |
- * | CURVE_CV        |    Iin    | Vout-Vin  |    Vout   |
- * | CURVE_LSV       |    Iin    | Vout-Vin  |    Vout   |
- * | CURVE_CA        |    Iin    | Vout-Vin  |    Vout   |
- * | CURVE_OCP       |    Iin    | Vmon-Vin  |    Vin    |
- * | CURVE_UNI_PULSE |  pul1_Iin | pul2_Iin  |           |
- * +-----------------+-----------+-----------+-----------+
- */
-
-static void EliteADCControl(uint32_t time)
-{
-    void *wm = wm_get();
-    uint32_t t = time;
-
-    switch (instru.eliteFxn) {
-        case CURVE_IV:
-        case CURVE_IV_CY:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200);
-                InputNotify(NOTIFY_IMPEDANCE, MEAS_VIN(wm));
-            }
-            break;
-
-        case CURVE_RT:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200);
-            }
-            break;
-
-        case CURVE_CC:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            }
-            break;
-
-        case CURVE_CV:
-        case CURVE_CA:
-        case CURVE_LSV:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200 - MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            }
-            break;
-
-        case CURVE_IT:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if(volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            }
-            break;
-
-        case CURVE_VT:
-            Iin_Vin_Plot();
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, MEAS_VIN(wm));
-            }
-            break;
-
-        case CURVE_VO:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200);
-                InputNotify(NOTIFY_IMPEDANCE, MEAS_VIN(wm));
-            }
-            break;
-
-        case CURVE_OCP:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, MEAS_VOUT(wm) - MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, MEAS_VIN(wm));
-            }
-            break;
-
-        case CURVE_CALI_ADC:
-            if (instru.AdcChannel == RIS_ADC_IIN) {
-                cali_IT_plot();
-            } else if (instru.AdcChannel == RIS_ADC_VIN) {
-                cali_VT_plot();
-            } else if (instru.AdcChannel == RIS_DAC_VOUT) {
-                cali_Vout_plot();
-            }
-            break;
-
-        case CURVE_UNI_PULSE:
-            IT_Plot(t);
-            break;
-
-        case CURVE_DPV:
-            Iin_Vin_Vout_Plot(t);
-            break;
-
-        case CURVE_DPV_SMPRATE:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200 - MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            }
-            break;
-
-        case CURVE_DPV_ADVANCE:
-            Iin_Vin_Vout_Plot(t);
-            break;
-
-        case CURVE_DPV_ADVANCE_SMPRATE:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200 - MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            }
-            break;
-
-        default:
-            break;
-    }
-}
-
-static void mode_done(void)
-{
-    if ((instru.eliteFxn == CURVE_IV)  ||
-        (instru.eliteFxn == CURVE_CV)  ||
-        (instru.eliteFxn == CURVE_LSV) ||
-        (instru.eliteFxn == CURVE_IV_CY) ||
-        (instru.eliteFxn == CURVE_DPV) ||
-        (instru.eliteFxn == CURVE_DPV_SMPRATE) ||
-        (instru.eliteFxn == CURVE_DPV_ADVANCE) ||
-        (instru.eliteFxn == CURVE_DPV_ADVANCE_SMPRATE)) {
-        if (!PeriodicEvent) {
-            finishMode = true;
-            SendNotify();
-            Eliteinterrupt();
-        }
-    }
-}
-
-static void vscan_ctrl(uint32_t time)
-{
-    uint32_t t = time;
-
-    switch (instru.eliteFxn) {
-        case CURVE_IV:
-            iv_vscan();
-            break;
-
-        case CURVE_IV_CY:
-            iv_cy_vscan();
-            break;
-
-        case CURVE_VO:
-            vo_vscan();
-            break;
-
-        case CURVE_RT:
-            rt_vscan();
-            break;
-
-        case CURVE_IT:
-            it_vscan();
-            break;
-
-        case CURVE_CV:
-            cv_vscan();
-            break;
-
-        case CURVE_LSV:
-            lsv_vscan();
-            break;
-
-        case CURVE_CA:
-            ca_vscan();
-            break;
-
-        case CURVE_UNI_PULSE:
-            uni_pulse_vscan(t);
-            break;
-
-        case CURVE_DPV:
-        case CURVE_DPV_SMPRATE:
-            dpv_vscan(t);
-            break;
-
-        case CURVE_DPV_ADVANCE:
-        case CURVE_DPV_ADVANCE_SMPRATE:
-            dpv_advance_vscan(t);
-            break;
-
-
-        default:{
-            break;
-        }
-    }
-}
-
-static uint32_t get_step_time(uint8_t StepTime){
-
-    switch (StepTime) {
-        case 0: {  //0.5 sec
-            return STEPTIME_HALF_SEC;
-        }
-        case 1: {  //1 sec
-            return STEPTIME_ONE_SEC;
-        }
-        case 2: {  //2 sec
-            return STEPTIME_TWO_SEC;
-        }
-        default: {  //1 sec
-            return STEPTIME_ONE_SEC;
-        }
-    }
-}
-
-static void step2VsetRate(uint32_t step){
-    /*step = 100 mv, index = 0, n = 2
-             10  mv, index = 1, n = 10
-             1   mv, index = 2, n = 100
-             0.1 mv, index = 3, n = 1000
-             0.01mv, index = 4, n = 10000  */
-
-    if(step >= 10000){
-        instru.VsetRateIndex = 0;
-    }else if (step >= 1000){
-        instru.VsetRateIndex = 1;
-    }else if (step >= 100){
-        instru.VsetRateIndex = 2;
-    }else if (step >= 10){
-        instru.VsetRateIndex = 3;
-    }else if (step >= 1){
-        instru.VsetRateIndex = 4;
-    }
-}
-
-#endif /* IMPEDANCE_METER_H_ */

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/scan_volt.h

@@ -1,790 +0,0 @@
-#ifndef SCAN_VOLT_H
-#define SCAN_VOLT_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#define Vset instru.Vset
-
-static void iv_vscan(void)
-{
-    struct wm_iv_ctx_t *iv = (struct wm_iv_ctx_t *)wm_get();
-
-    if (vscanReset) {
-        if (instru.directionInit == 1) {
-            iv->_direction_up         = true;
-            iv->_current_direction_up = true;
-        } else if (instru.directionInit == 0) {
-            iv->_direction_up         = false;
-            iv->_current_direction_up = false;
-        }
-
-        //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if (instru.step <= 10) {
-            iv->_Vstep = instru.step * instru.VsetRate / 5;
-        } else {
-            iv->_Vstep = instru.step / 5 * instru.VsetRate;
-        }
-
-        Vset = iv->_Vinit;
-    }
-
-    if (!vscanReset) {
-        if (iv->_current_direction_up) {
-            if (Vset >= iv->_Vmax) {
-                PeriodicEvent = false;
-            }
-        } else {
-            if (Vset <= iv->_Vmin) {
-                PeriodicEvent = false;
-            }
-        }
-
-        if (iv->_current_direction_up) {
-            Vset = Vset + iv->_Vstep * GPT.GptimerMultiple;
-        } else {
-            Vset = Vset - iv->_Vstep * GPT.GptimerMultiple;
-        }
-    }
-
-    return;
-}
-
-static void iv_cy_vscan(void)
-{
-    struct wm_iv_cy_ctx_t *iv_cy = (struct wm_iv_cy_ctx_t *)wm_get();
-    static bool VminCounter;
-    static bool VmaxCounter;
-
-    NotifyCycleNumber = (instru.cycleNumber - iv_cy->_cycleNumber + 1);
-
-    if(vscanReset){
-        VmaxCounter = false;
-        VminCounter = false;
-
-        if(instru.directionInit == 1){
-            iv_cy->_direction_up         = true;
-            iv_cy->_current_direction_up = true;
-        }else if(instru.directionInit == 0){
-            iv_cy->_direction_up         = false;
-            iv_cy->_current_direction_up = false;
-        }
-
-        //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if(instru.step <= 10){
-            iv_cy->_Vstep = instru.step * instru.VsetRate / 5;
-        }else{
-            iv_cy->_Vstep = instru.step / 5 * instru.VsetRate;
-        }
-
-        if(iv_cy->_Vmin == iv_cy->_Vinit){
-            VminCounter = true;
-        }
-        if(iv_cy->_Vmax == iv_cy->_Vinit){
-            VmaxCounter = true;
-        }
-
-        Vset = iv_cy->_Vinit;
-    }
-
-    if(!vscanReset){
-        if (Vset >= iv_cy->_Vmax){
-            VmaxCounter = true;
-        }else if (Vset <= iv_cy->_Vmin){
-            VminCounter = true;
-        }
-
-        if (iv_cy->_current_direction_up){
-            Vset = Vset + iv_cy->_Vstep * GPT.GptimerMultiple;
-        }else{
-            Vset = Vset - iv_cy->_Vstep * GPT.GptimerMultiple;
-        }
-
-        if(VmaxCounter && VminCounter){
-            if(iv_cy->_direction_up && iv_cy->_current_direction_up){
-                if(Vset >= iv_cy->_Vinit){
-                    iv_cy->_cycleNumber--;
-                    VminCounter = false;
-                    VmaxCounter = false;
-                }
-            }
-            if(!iv_cy->_direction_up && !iv_cy->_current_direction_up){
-                if(Vset <= iv_cy->_Vinit){
-                    iv_cy->_cycleNumber--;
-                    VminCounter = false;
-                    VmaxCounter = false;
-                }
-            }
-        }
-
-        if (Vset >= iv_cy->_Vmax){
-            iv_cy->_current_direction_up = false;
-        }else if (Vset <= iv_cy->_Vmin){
-            iv_cy->_current_direction_up = true;
-        }
-
-        /*stop condition*/
-        if(iv_cy->_cycleNumber == 0){
-            PeriodicEvent = false;
-        }
-    }
-
-    return;
-}
-
-static void it_vscan(void)
-{
-    struct wm_it_ctx_t *it = (struct wm_it_ctx_t *)wm_get();
-
-    if (vscanReset) {
-        Vset = it->_Vinit;
-    }
-
-    if(!vscanReset) {
-        Vset = it->_Vinit;
-    }
-
-    return;
-}
-
-static void rt_vscan(void)
-{
-    struct wm_rt_ctx_t *rt = (struct wm_rt_ctx_t *)wm_get();
-
-    if (vscanReset) {
-        Vset = rt->_Vinit;
-    }
-
-    if(!vscanReset) {
-        Vset = rt->_Vinit;
-    }
-
-    return;
-}
-
-static void vo_vscan(void)
-{
-    struct wm_vo_ctx_t *vo = (struct wm_vo_ctx_t *)wm_get();
-
-    if (vscanReset) {
-        Vset = vo->_Vinit;
-    }
-
-    if(!vscanReset) {
-        Vset = vo->_Vinit;
-    }
-
-    return;
-}
-
-#define DELTAVOLTMAX 20000000 //2000000 = 10mV  //10000000 = 50mV //20000000 = 100mV
-#define RESISTANCE_100R     1   // 100V/1A = 1[5nV]/50[pA]
-
-static void cc_vscan(void)
-{
-    /* Transform setting CC into IUC
-     *
-     * User code in CC mode : 0 ~ 3000000
-     * Real current value : -15.00000 ~ 15.00000 mA
-     *  => user code = 1500000 mapping to 0.00000 mA
-     */
-
-    struct wm_cc_ctx_t *cc = (struct wm_cc_ctx_t *)wm_get();
-    struct wm_meas_t *m = &cc->measure;
-    uint16_t divisionRate;
-    int32_t deltaI;
-    int32_t deltaV;
-    int32_t Iin;
-    int32_t Voutin;
-    uint8_t cc_cp_speed = instru.cc_cp_speed; // 0:low 1:normal 2:high
-    uint8_t cc_resistance = instru.cc_resistance; // 0:vout has 0R 1:vout has 100R
-    static int32_t i_set = 0;
-
-    if (vscanReset) {
-        Vset = 0;
-
-        if (cc->_charge == 0) {
-            i_set = cc->_Iset * (-1);
-        } else if(cc->_charge == 1) {
-            i_set = cc->_Iset;
-        }
-
-        Iin = m->_measureCurrent * 20; //[50pA]   nA => 50pA
-        Voutin = m->_measureVout * 200; //[5nV]
-
-        if (cc_resistance == 1) //vout has 100R
-            Vset = Voutin + (i_set * RESISTANCE_100R); //[5nV]
-        else
-            Vset = Voutin; //[5nV]
-
-        if (Vset >= 1100000000) { // 5.5V
-            Vset = 1100000000;
-        } else if (Vset <= -1000000000) { //-5V
-            Vset = -1000000000;
-        }
-    }
-
-    if (!vscanReset) {
-        Iin = m->_measureCurrent * 20; //[50pA]   nA => 50pA
-        deltaI = Iin - i_set;
-
-        if (deltaI > 400000 || deltaI < -400000) { //20uA
-            if (instru.cc_cp_speed == 0) { // 0:low 1:normal 2:high
-                cc_cp_speed = 100;
-            } else if (instru.cc_cp_speed == 1) {
-                cc_cp_speed = 10;
-            } else {
-                cc_cp_speed = 1;
-            }
-        } else {
-            if (instru.cc_cp_speed == 0) { // 0:low 1:normal 2:high
-                cc_cp_speed = 100;
-            } else if (instru.cc_cp_speed == 1) {
-                cc_cp_speed = 20;
-            } else {
-                cc_cp_speed = 20;
-            }
-        }
-
-        divisionRate = cc_cp_speed;
-
-        deltaV = -1 * (deltaI / divisionRate); //-5 * deltaI / 5000   //pV=> 5nV
-
-        if (deltaV > DELTAVOLTMAX) { //2000000 = 10mV
-            deltaV = DELTAVOLTMAX;
-        } else if (deltaV < (-DELTAVOLTMAX)) {
-            deltaV = (-DELTAVOLTMAX);
-        }
-
-        Vset = Vset + deltaV; //[5nV]
-
-        if (Vset >= 1100000000) { // 5.5V
-            Vset = 1100000000;
-        } else if (Vset <= -1000000000) { //-5V
-            Vset = -1000000000;
-        }
-
-        if (Vset <= cc->_Vmin) {
-            Vset = cc->_Vmin;
-        } else if (Vset >= cc->_Vmax) {
-            Vset = cc->_Vmax;
-        }
-    }
-
-    return;
-}
-
-static void cv_vscan(void)
-{
-    struct wm_cv_ctx_t *cv = (struct wm_cv_ctx_t *)wm_get();
-    static bool VminCounter;
-    static bool VmaxCounter;
-
-    NotifyCycleNumber = (instru.cycleNumber - cv->_cycleNumber + 1);
-
-
-    if (vscanReset) {
-        VmaxCounter = false;
-        VminCounter = false;
-
-        if (instru.directionInit == 1) {
-            cv->_direction_up         = true;
-            cv->_current_direction_up = true;
-        } else {
-            cv->_direction_up         = false;
-            cv->_current_direction_up = false;
-        }
-
-        //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if (instru.step <= 10) {
-            cv->_Vstep = instru.step *  instru.VsetRate / 5;
-        } else {
-            cv->_Vstep = instru.step / 5 *  instru.VsetRate;
-        }
-
-        if (cv->_Vmin == cv->_Vinit) {
-            VminCounter = true;
-        }
-        if (cv->_Vmax == cv->_Vinit) {
-            VmaxCounter = true;
-        }
-
-        Vset = cv->_Vinit;
-    }
-
-    if (!vscanReset) {
-        if ((instru.Vinit < instru.Ve1 && instru.Vinit < instru.Ve2) ||
-        (instru.Vinit > instru.Ve1 && instru.Vinit > instru.Ve2)
-        ) {
-            if (cv->_current_direction_up) {
-                Vset = Vset + cv->_Vstep * GPT.GptimerMultiple;
-            } else {
-                Vset = Vset - cv->_Vstep * GPT.GptimerMultiple;
-            }
-
-            if (instru.Vinit < instru.Ve1 && instru.Vinit < instru.Ve2) {
-                if (Vset == cv->_Vmin) {
-                    VminCounter = true;
-                    instru.Vinit = instru.Vmin;
-                    cv->_Vinit = cv->_Vmin;
-                }
-            } else if (instru.Vinit > instru.Ve1 && instru.Vinit > instru.Ve2) {
-                if (Vset == cv->_Vmax) {
-                    VmaxCounter = true;
-                    instru.Vinit = instru.Vmax;
-                    cv->_Vinit = cv->_Vmax;
-                }
-            }
-        } else {
-            if (Vset >= cv->_Vmax) {
-                VmaxCounter = true;
-            } else if (Vset <= cv->_Vmin) {
-                VminCounter = true;
-            }
-
-            if (cv->_current_direction_up) {
-                Vset = Vset + cv->_Vstep * GPT.GptimerMultiple;
-            } else {
-                Vset = Vset - cv->_Vstep * GPT.GptimerMultiple;
-            }
-
-            if (VmaxCounter && VminCounter) {
-                if (cv->_direction_up && cv->_current_direction_up) {
-                    if (Vset >= cv->_Vinit) {
-                        cv->_cycleNumber--;
-                        VminCounter = false;
-                        VmaxCounter = false;
-                    }
-                }
-                if (!cv->_direction_up && !cv->_current_direction_up) {
-                    if (Vset <= cv->_Vinit) {
-                        cv->_cycleNumber--;
-                        VminCounter = false;
-                        VmaxCounter = false;
-                    }
-                }
-            }
-
-            if (Vset >= cv->_Vmax) {
-                cv->_current_direction_up = false;
-            } else if (Vset <= cv->_Vmin) {
-                cv->_current_direction_up = true;
-            }
-
-            /*stop condition*/
-            if (cv->_cycleNumber == 0) {
-                PeriodicEvent = false;
-            }
-        }
-    }
-
-    return;
-}
-
-static void lsv_vscan(void)
-{
-    struct wm_lsv_ctx_t *lsv = (struct wm_lsv_ctx_t *)wm_get();
-
-    NotifyCycleNumber = (instru.cycleNumber - lsv->_cycleNumber + 1);
-
-    if (vscanReset) {
-        if (instru.directionInit == 1) {
-            lsv->_direction_up         = true;
-            lsv->_current_direction_up = true;
-        } else {
-            lsv->_direction_up         = false;
-            lsv->_current_direction_up = false;
-        }
-
-         //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if (instru.step <= 10) {
-            lsv->_Vstep = instru.step *  instru.VsetRate / 5;
-        } else {
-            lsv->_Vstep = instru.step / 5 *  instru.VsetRate;
-        }
-
-        Vset = lsv->_Vinit;
-    }
-
-    if (!vscanReset) {
-
-        if (lsv->_current_direction_up) {
-            Vset = Vset + lsv->_Vstep * GPT.GptimerMultiple;
-        } else {
-            Vset = Vset - lsv->_Vstep * GPT.GptimerMultiple;
-        }
-
-        /*stop condition*/
-        if (Vset >= lsv->_Vmax) {
-            PeriodicEvent = false;
-        } else if (Vset <= lsv->_Vmin) {
-            PeriodicEvent = false;
-        }
-    }
-
-    return;
-}
-
-static void ca_vscan(void)
-{
-    struct wm_ca_ctx_t *ca = (struct wm_ca_ctx_t *)wm_get();
-
-    if(vscanReset){
-        Vset = ca->_Vinit;
-    }
-
-    if(!vscanReset){
-        Vset = ca->_Vinit;
-    }
-
-    return;
-}
-
-
-static void uni_pulse_vscan(uint32_t time)
-{
-    uint32_t t = time;
-    struct wm_uni_pulse_ctx_t *p = (struct wm_uni_pulse_ctx_t *)wm_get();
-    uint32_t m;
-    uint32_t t_min;
-    uint32_t t_max;
-
-    if(vscanReset){
-        Vset = p->_v0;
-
-        return;
-    }
-
-    if(!vscanReset){
-
-        if (t == 0) {
-            m = 0;
-        } else {
-           m = t % p->_t_period;
-        }
-
-        if (m < p->_t_pa[0]) {
-            p->_Vset = p->_v_initial[0] + p->_v_slope[0] * t + p->_v_step[0] * (int32_t)(t / p->_t_period);
-            Vset = p->_Vset;
-
-            t_min = p->_t_pulse_min[0];
-            t_max = p->_t_pulse_max[0];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        if (m < p->_t_pa[1]) {
-            p->_Vset = p->_v_initial[1] + p->_v_slope[1] * t + p->_v_step[1] * (int32_t)(t / p->_t_period);
-            Vset = p->_Vset;
-
-            t_min = p->_t_pa[0] + p->_t_pulse_min[1];
-            t_max = p->_t_pa[0] + p->_t_pulse_max[1];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        if (m < p->_t_pa[2]) {
-            p->_Vset = p->_v_initial[2] + p->_v_slope[2] * t + p->_v_step[2] * (int32_t)(t / p->_t_period);
-            Vset = p->_Vset;
-
-            t_min = p->_t_pa[1] + p->_t_pulse_min[2];
-            t_max = p->_t_pa[1] + p->_t_pulse_max[2];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        if (m < p->_t_pa[3]) {
-            p->_Vset = p->_v_initial[3] + p->_v_slope[3] * t + p->_v_step[3] * (int32_t)(t / p->_t_period);
-            Vset = p->_Vset;
-
-            t_min = p->_t_pa[2] + p->_t_pulse_min[3];
-            t_max = p->_t_pa[2] + p->_t_pulse_max[3];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        return;
-    }
-
-    return;
-}
-
-static void dpv_vscan(uint32_t time)
-{
-    uint32_t t = time;
-    struct wm_dpv_ctx_t *p = (struct wm_dpv_ctx_t *)wm_get();
-    uint32_t m;
-    uint32_t t_min;
-    uint32_t t_max;
-
-    if(vscanReset){
-        Vset = p->_v0;
-
-        return;
-    }
-
-    if(!vscanReset){
-
-        if (t == 0) {
-            m = 0;
-        } else {
-           m = t % p->_t_period;
-        }
-
-        if (m < p->_t_pa[0]) {
-            p->_Vset = p->_v_initial[0] + p->_v_slope[0] * t / 1000 + p->_v_step[0] * (int32_t)dpv_step_cnt; // _v_slope/100 = slope
-            Vset = p->_Vset;
-
-            t_min = p->_t_pulse_min[0];
-            t_max = p->_t_pulse_max[0];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            if ((p->_v_curr_direc && Vset >= p->_v_stop) ||
-               (!p->_v_curr_direc && Vset <= p->_v_stop)) {
-                PeriodicEvent = false;
-            }
-
-            return;
-        }
-
-        if (m < p->_t_pa[1]) {
-            p->_Vset = p->_v_initial[1] + p->_v_slope[1] * t / 1000 + p->_v_step[1] * (int32_t)dpv_step_cnt;
-            Vset = p->_Vset;
-
-            t_min = p->_t_pa[0] + p->_t_pulse_min[1];
-            t_max = p->_t_pa[0] + p->_t_pulse_max[1];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        return;
-    }
-
-    return;
-}
-
-static void dpv_advance_vscan(uint32_t time)
-{
-    uint32_t t = time;
-    struct wm_dpv_advance_ctx_t *p = (struct wm_dpv_advance_ctx_t *)wm_get();
-    uint32_t m;
-    uint32_t t_min;
-    uint32_t t_max;
-    static bool VminCounter;
-    static bool VmaxCounter;
-
-    if(vscanReset){
-        if (p->_v_direc_init) {
-            if (p->_v0 <= p->_v_up && p->_v0 <= p->_v_low && p->_v_2 > p->_v_1) {
-                VminCounter = true;
-            }
-
-        } else {
-            if (p->_v0 >= p->_v_up && p->_v0 >= p->_v_low && p->_v_1 > p->_v_2) {
-                VmaxCounter = true;
-            }
-        }
-
-
-
-        p->_Vset = p->_v0;
-        Vset = p->_Vset;
-
-        return;
-    }
-
-    if(!vscanReset){
-
-        if (t == 0) {
-            m = 0;
-        } else {
-           m = t % p->_t_period;
-        }
-
-        if (m < p->_t_pa[0]) {
-
-            t_min = p->_t_pulse_min[0];
-            t_max = p->_t_pulse_max[0];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            p->_Vset = p->_v_initial[0] + p->_v_slope[0] * t / 1000 + p->_v_step[0] * (int32_t)dpv_step_cnt; // _v_slope/100 = slope
-            Vset = p->_Vset;
-
-            if (VminCounter == true && VmaxCounter == true) {
-                p->_cycleNumber--;
-                VminCounter = false;
-                VmaxCounter = false;
-
-            }
-
-            if (p->_cycleNumber <= 0) {
-                if (p->_v_stop_direction == true && p->_Vset >= p->_v_stop - p->_v_amp + p->_v_step[0]) {
-                    PeriodicEvent = false;
-                } else if (p->_v_stop_direction == false && p->_Vset <= p->_v_stop - p->_v_amp + p->_v_step[0]) {
-                    PeriodicEvent = false;
-                }
-            }
-
-            if (p->_v_curr_direc && p->_Vset >= p->_v_up - p->_v_amp + p->_v_step[0]) {
-                if (p->_v_invert_option) {
-                    p->_v_amp = p->_v_amp * (-1);
-                }
-                p->_v_initial[0] = p->_Vset;
-                p->_v_initial[1] = p->_v_initial[0] + p->_v_amp;
-                dpv_step_cnt = 0;
-                p->_v_step[0] = (-1) * p->_v_step[0];
-                p->_v_step[1] = (-1) * p->_v_step[1];
-                p->_v_curr_direc = false;
-                VmaxCounter = true;
-                p->_Vset = p->_v_initial[0] + p->_v_slope[0] * t / 1000 * (int32_t)dpv_step_cnt; // _v_slope/100 = slope
-                Vset = p->_Vset;
-
-            } else if (!p->_v_curr_direc && p->_Vset <= p->_v_low - p->_v_amp + p->_v_step[0]) {
-                if (p->_v_invert_option) {
-                    p->_v_amp = p->_v_amp * (-1);
-                }
-                p->_v_initial[0] = p->_Vset;
-                p->_v_initial[1] = p->_v_initial[0] + p->_v_amp;
-                dpv_step_cnt = 0;
-                p->_v_step[0] = (-1) * p->_v_step[0];
-                p->_v_step[1] = (-1) * p->_v_step[1];
-                p->_v_curr_direc = true;
-                VminCounter = true;
-                p->_Vset = p->_v_initial[0] + p->_v_slope[0] * t / 1000 * (int32_t)dpv_step_cnt; // _v_slope/100 = slope
-                Vset = p->_Vset;
-
-            }
-
-            return;
-        }
-
-        if (m < p->_t_pa[1]) {
-            p->_Vset = p->_v_initial[1] + p->_v_slope[1] * t / 1000 + p->_v_step[1] * (int32_t)dpv_step_cnt;
-            Vset = p->_Vset;
-
-            t_min = p->_t_pa[0] + p->_t_pulse_min[1];
-            t_max = p->_t_pa[0] + p->_t_pulse_max[1];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        return;
-    }
-
-    return;
-}
-
-static void chg_vo_para(uint16_t parameter, int32_t value)
-{
-    uint16_t pa = parameter;
-    int32_t val = value;
-    struct wm_vo_ctx_t *vo = (struct wm_vo_ctx_t *)wm_get();
-
-    if (pa == DAC_VOLT) {
-        vo->_Vinit = val;
-    }
-
-    return;
-}
-
-static void chg_it_para(uint16_t parameter, int32_t value)
-{
-    uint16_t pa = parameter;
-    int32_t val = value;
-    struct wm_it_ctx_t *it = (struct wm_it_ctx_t *)wm_get();
-
-    if (pa == DAC_VOLT) {
-        it->_Vinit = val;
-    }
-
-    return;
-}
-
-static void chg_rt_para(uint16_t parameter, int32_t value)
-{
-    uint16_t pa = parameter;
-    int32_t val = value;
-    struct wm_rt_ctx_t *rt = (struct wm_rt_ctx_t *)wm_get();
-
-    if (pa == DAC_VOLT) {
-        rt->_Vinit = val;
-    }
-
-    return;
-}
-
-static void set_para(uint8_t eliteFxn, uint16_t parameter, int32_t value)
-{
-    uint8_t mode = eliteFxn;
-    uint16_t pa = parameter;
-    int32_t val = value;
-
-    if (mode == CURVE_VO) {
-        chg_vo_para(pa, val);
-
-        return;
-    }
-
-    if (mode == CURVE_IT) {
-        chg_it_para(pa, val);
-
-        return;
-    }
-
-    if (mode == CURVE_RT) {
-        chg_rt_para(pa, val);
-
-        return;
-    }
-
-    return;
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/main.c

@@ -132,7 +132,7 @@ PIN_Handle radCtrlHandle;
 
 extern void AssertHandler(uint8 assertCause, uint8 assertSubcause);
 
-// extern Display_Handle dispHandle;
+//extern Display_Handle dispHandle;
 
 /*******************************************************************************
  * @fn          Main
@@ -247,49 +247,48 @@ int main()
  */
 void AssertHandler(uint8 assertCause, uint8 assertSubcause)
 {
-/*
   // Open the display if the app has not already done so
-  if ( !dispHandle )
-  {
-    dispHandle = Display_open(Display_Type_LCD, NULL);
-  }
+//  if ( !dispHandle )
+//  {
+//    dispHandle = Display_open(Display_Type_LCD, NULL);
+//  }
 
-  Display_print0(dispHandle, 0, 0, ">>>STACK ASSERT");
+
+//  Display_print0(dispHandle, 0, 0, ">>>STACK ASSERT");
 
   // check the assert cause
-  switch (assertCause)
-  {
-    case HAL_ASSERT_CAUSE_OUT_OF_MEMORY:
-      Display_print0(dispHandle, 0, 0, "***ERROR***");
-      Display_print0(dispHandle, 2, 0, ">> OUT OF MEMORY!");
-      break;
-
-    case HAL_ASSERT_CAUSE_INTERNAL_ERROR:
-      // check the subcause
-      if (assertSubcause == HAL_ASSERT_SUBCAUSE_FW_INERNAL_ERROR)
-      {
-        Display_print0(dispHandle, 0, 0, "***ERROR***");
-        Display_print0(dispHandle, 2, 0, ">> INTERNAL FW ERROR!");
-      }
-      else
-      {
-        Display_print0(dispHandle, 0, 0, "***ERROR***");
-        Display_print0(dispHandle, 2, 0, ">> INTERNAL ERROR!");
-      }
-      break;
-
-    case HAL_ASSERT_CAUSE_ICALL_ABORT:
-      Display_print0(dispHandle, 0, 0, "***ERROR***");
-      Display_print0(dispHandle, 2, 0, ">> ICALL ABORT!");
-      HAL_ASSERT_SPINLOCK;
-      break;
-
-    default:
-      Display_print0(dispHandle, 0, 0, "***ERROR***");
-      Display_print0(dispHandle, 2, 0, ">> DEFAULT SPINLOCK!");
-      HAL_ASSERT_SPINLOCK;
-  }
-*/
+//  switch (assertCause)
+//  {
+//    case HAL_ASSERT_CAUSE_OUT_OF_MEMORY:
+//      Display_print0(dispHandle, 0, 0, "***ERROR***");
+//      Display_print0(dispHandle, 2, 0, ">> OUT OF MEMORY!");
+//      break;
+//
+//    case HAL_ASSERT_CAUSE_INTERNAL_ERROR:
+//      // check the subcause
+//      if (assertSubcause == HAL_ASSERT_SUBCAUSE_FW_INERNAL_ERROR)
+//      {
+//        Display_print0(dispHandle, 0, 0, "***ERROR***");
+//        Display_print0(dispHandle, 2, 0, ">> INTERNAL FW ERROR!");
+//      }
+//      else
+//      {
+//        Display_print0(dispHandle, 0, 0, "***ERROR***");
+//        Display_print0(dispHandle, 2, 0, ">> INTERNAL ERROR!");
+//      }
+//      break;
+//
+//    case HAL_ASSERT_CAUSE_ICALL_ABORT:
+//      Display_print0(dispHandle, 0, 0, "***ERROR***");
+//      Display_print0(dispHandle, 2, 0, ">> ICALL ABORT!");
+//      HAL_ASSERT_SPINLOCK;
+//      break;
+//
+//    default:
+//      Display_print0(dispHandle, 0, 0, "***ERROR***");
+//      Display_print0(dispHandle, 2, 0, ">> DEFAULT SPINLOCK!");
+//      HAL_ASSERT_SPINLOCK;
+//  }
 
   return;
 }

simplelink/ble_sdk_2_02_02_25/src/profiles/simple_profile/cc26xx/simple_gatt_profile.c

@@ -9,7 +9,7 @@
  Target Device: CC2650, CC2640
 
  ******************************************************************************
-
+ 
  Copyright (c) 2010-2018, Texas Instruments Incorporated
  All rights reserved.
 
@@ -135,6 +135,7 @@ static simpleProfileCBs_t *simpleProfile_AppCBs = NULL;
 // Simple Profile Service attribute
 static CONST gattAttrType_t simpleProfileService = { ATT_BT_UUID_SIZE, simpleProfileServUUID };
 
+
 // Simple Profile Characteristic 1 Properties
 // static uint8 simpleProfileChar1Props = GATT_PROP_READ | GATT_PROP_WRITE;
 /*user insert*/
@@ -143,12 +144,13 @@ static uint8 simpleProfileChar1Props = GATT_PROP_READ;
 // Characteristic 1 Value
 // static uint8 simpleProfileChar1 = 0;
 /*user insert*/
-#define SIMPLEPROFILE_CHAR1_LEN 20
 static uint8 simpleProfileChar1[SIMPLEPROFILE_CHAR1_LEN] = {0};
 
+
 // Simple Profile Characteristic 1 User Description
 static uint8 simpleProfileChar1UserDesp[17] = "Characteristic 1";
 
+
 // Simple Profile Characteristic 2 Properties
 static uint8 simpleProfileChar2Props = GATT_PROP_READ;
 
@@ -157,9 +159,11 @@ static uint8 simpleProfileChar2Props = GATT_PROP_READ;
 /*user insert*/
 static uint8 simpleProfileChar2[SIMPLEPROFILE_CHAR2_LEN] = {0};
 
+
 // Simple Profile Characteristic 2 User Description
 static uint8 simpleProfileChar2UserDesp[17] = "Characteristic 2";
 
+
 // Simple Profile Characteristic 3 Properties
 static uint8 simpleProfileChar3Props = GATT_PROP_WRITE;
 
@@ -168,9 +172,11 @@ static uint8 simpleProfileChar3Props = GATT_PROP_WRITE;
 /*user insert*/
 static uint8 simpleProfileChar3[SIMPLEPROFILE_CHAR3_LEN] = {0};
 
+
 // Simple Profile Characteristic 3 User Description
 static uint8 simpleProfileChar3UserDesp[17] = "Characteristic 3";
 
+
 // Simple Profile Characteristic 4 Properties
 static uint8 simpleProfileChar4Props = GATT_PROP_NOTIFY;
 
@@ -179,6 +185,7 @@ static uint8 simpleProfileChar4Props = GATT_PROP_NOTIFY;
 /*user insert*/
 static uint8 simpleProfileChar4[SIMPLEPROFILE_CHAR4_LEN] = {0};
 
+
 // Simple Profile Characteristic 4 Configuration Each client has its own
 // instantiation of the Client Characteristic Configuration. Reads of the
 // Client Characteristic Configuration only shows the configuration for
@@ -188,6 +195,7 @@ static gattCharCfg_t *simpleProfileChar4Config;
 // Simple Profile Characteristic 4 User Description
 static uint8 simpleProfileChar4UserDesp[17] = "Characteristic 4";
 
+
 // Simple Profile Characteristic 5 Properties
 static uint8 simpleProfileChar5Props = GATT_PROP_READ;
 
@@ -222,17 +230,17 @@ static gattAttribute_t simpleProfileAttrTbl[SERVAPP_NUM_ATTR_SUPPORTED] =
       // Characteristic Value 1
       {
         { ATT_BT_UUID_SIZE, simpleProfilechar1UUID },
-      	GATT_PERMIT_READ,
-      	0,
-      	simpleProfileChar1
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar1
       },
 
       // Characteristic 1 User Description
       {
         { ATT_BT_UUID_SIZE, charUserDescUUID },
-    	GATT_PERMIT_READ,
-    	0,
-    	simpleProfileChar1UserDesp
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar1UserDesp
       },
 
     // Characteristic 2 Declaration
@@ -246,114 +254,112 @@ static gattAttribute_t simpleProfileAttrTbl[SERVAPP_NUM_ATTR_SUPPORTED] =
       // Characteristic Value 2
       {
         { ATT_BT_UUID_SIZE, simpleProfilechar2UUID },
-	    GATT_PERMIT_READ,
-	    0,
-	    simpleProfileChar2
-	  },
-	  
-	  // Characteristic 2 User Description
-	  {
-	    { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-	    GATT_PERMIT_READ, 
-	    0, 
-	    simpleProfileChar2UserDesp
-	  },
-
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar2
+      },
 
+      // Characteristic 2 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar2UserDesp
+      },
 
     // Characteristic 3 Declaration
     {
-      { ATT_BT_UUID_SIZE, characterUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
+      { ATT_BT_UUID_SIZE, characterUUID },
+      GATT_PERMIT_READ,
+      0,
       &simpleProfileChar3Props
     },
 
-    // Characteristic Value 3
-    {
-      { ATT_BT_UUID_SIZE, simpleProfilechar3UUID }, 
-      GATT_PERMIT_WRITE, 
-      0, 
-      simpleProfileChar3
-    },
+      // Characteristic Value 3
+      {
+        { ATT_BT_UUID_SIZE, simpleProfilechar3UUID },
+        GATT_PERMIT_WRITE,
+        0,
+        simpleProfileChar3
+      },
 
-    // Characteristic 3 User Description
-    {
-      { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
-      simpleProfileChar3UserDesp
-    },
+      // Characteristic 3 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar3UserDesp
+      },
 
     // Characteristic 4 Declaration
     {
-      { ATT_BT_UUID_SIZE, characterUUID }, 
-      GATT_PERMIT_READ, 
+      { ATT_BT_UUID_SIZE, characterUUID },
+      GATT_PERMIT_READ,
       0,
       &simpleProfileChar4Props
     },
 
-    // Characteristic Value 4
-    {
-      { ATT_BT_UUID_SIZE, simpleProfilechar4UUID }, 
-      0, 
-      0, 
-      simpleProfileChar4
-    },
+      // Characteristic Value 4
+      {
+        { ATT_BT_UUID_SIZE, simpleProfilechar4UUID },
+        0,
+        0,
+        simpleProfileChar4
+      },
 
-    // Characteristic 4 configuration
-    {
-      { ATT_BT_UUID_SIZE, clientCharCfgUUID }, 
-      GATT_PERMIT_READ | GATT_PERMIT_WRITE, 
-      0, 
-      (uint8 *)&simpleProfileChar4Config
-    },
+      // Characteristic 4 configuration
+      {
+        { ATT_BT_UUID_SIZE, clientCharCfgUUID },
+        GATT_PERMIT_READ | GATT_PERMIT_WRITE,
+        0,
+        (uint8 *)&simpleProfileChar4Config
+      },
 
-    // Characteristic 4 User Description
-    {
-      { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
-      simpleProfileChar4UserDesp
-    },
+      // Characteristic 4 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar4UserDesp
+      },
 
     // Characteristic 5 Declaration
     {
-      { ATT_BT_UUID_SIZE, characterUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
+      { ATT_BT_UUID_SIZE, characterUUID },
+      GATT_PERMIT_READ,
+      0,
       &simpleProfileChar5Props
     },
 
-    // Characteristic Value 5
-    {
-      { ATT_BT_UUID_SIZE, simpleProfilechar5UUID }, 
-      GATT_PERMIT_AUTHEN_READ, 
-      0, 
-      simpleProfileChar5
-    },
+      // Characteristic Value 5
+      {
+        { ATT_BT_UUID_SIZE, simpleProfilechar5UUID },
+        GATT_PERMIT_AUTHEN_READ,
+        0,
+        simpleProfileChar5
+      },
 
-    // Characteristic 5 User Description
-    {
-      { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
-      simpleProfileChar5UserDesp
-    },
+      // Characteristic 5 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar5UserDesp
+      },
 };
 
 /*********************************************************************
  * LOCAL FUNCTIONS
  */
 static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle,
-										  gattAttribute_t *pAttr,
-										  uint8_t *pValue, uint16_t *pLen,
-										  uint16_t offset, uint16_t maxLen,
-										  uint8_t method);
+                                          gattAttribute_t *pAttr,
+                                          uint8_t *pValue, uint16_t *pLen,
+                                          uint16_t offset, uint16_t maxLen,
+                                          uint8_t method);
 static bStatus_t simpleProfile_WriteAttrCB(uint16_t connHandle,
-										   gattAttribute_t *pAttr,
-										   uint8_t *pValue, uint16_t len,
-										   uint16_t offset, uint8_t method);
+                                           gattAttribute_t *pAttr,
+                                           uint8_t *pValue, uint16_t len,
+                                           uint16_t offset, uint8_t method);
 
 /*********************************************************************
  * PROFILE CALLBACKS
@@ -395,7 +401,7 @@ bStatus_t SimpleProfile_AddService( uint32 services )
 
   // Allocate Client Characteristic Configuration table
   simpleProfileChar4Config = (gattCharCfg_t *)ICall_malloc( sizeof(gattCharCfg_t) *
-  														    linkDBNumConns );
+                                                            linkDBNumConns );
   if ( simpleProfileChar4Config == NULL )
   {
     return ( bleMemAllocError );
@@ -408,9 +414,9 @@ bStatus_t SimpleProfile_AddService( uint32 services )
   {
     // Register GATT attribute list and CBs with GATT Server App
     status = GATTServApp_RegisterService( simpleProfileAttrTbl,
-    									  GATT_NUM_ATTRS( simpleProfileAttrTbl ),
-    									  GATT_MAX_ENCRYPT_KEY_SIZE,
-    									  &simpleProfileCBs );
+                                          GATT_NUM_ATTRS( simpleProfileAttrTbl ),
+                                          GATT_MAX_ENCRYPT_KEY_SIZE,
+                                          &simpleProfileCBs );
   }
   else
   {
@@ -468,7 +474,7 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       {
         memcpy(simpleProfileChar1, value, len);
         // simpleProfileChar1 = *((uint8*)value);
-      } 
+      }
       else
       {
         ret = bleInvalidRange;
@@ -482,7 +488,7 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
         // simpleProfileChar2 = *((uint8*)value);
       }
       else
-	  {
+      {
         ret = bleInvalidRange;
       }
       break;
@@ -491,7 +497,8 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       if (len <= SIMPLEPROFILE_CHAR3_LEN) 
       {
         memcpy(simpleProfileChar3, value, len);
-      } 
+        // simpleProfileChar3 = *((uint8*)value);
+      }
       else
       {
         ret = bleInvalidRange;
@@ -502,9 +509,12 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       if (len <= SIMPLEPROFILE_CHAR4_LEN)
       {
         memcpy(simpleProfileChar4, value, len);
+        // simpleProfileChar4 = *((uint8*)value);
 
         // See if Notification has been enabled
-        GATTServApp_ProcessCharCfg(simpleProfileChar4Config, simpleProfileChar4, FALSE, simpleProfileAttrTbl, GATT_NUM_ATTRS(simpleProfileAttrTbl), INVALID_TASK_ID, simpleProfile_ReadAttrCB);
+        GATTServApp_ProcessCharCfg( simpleProfileChar4Config, simpleProfileChar4, FALSE,
+                                    simpleProfileAttrTbl, GATT_NUM_ATTRS( simpleProfileAttrTbl ),
+                                    INVALID_TASK_ID, simpleProfile_ReadAttrCB );
       }
       else
       {
@@ -513,8 +523,9 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       break;
 
     case SIMPLEPROFILE_CHAR5:
-      if (len == SIMPLEPROFILE_CHAR5_LEN) {
-        VOID memcpy(simpleProfileChar5, value, SIMPLEPROFILE_CHAR5_LEN);
+      if ( len == SIMPLEPROFILE_CHAR5_LEN )
+      {
+        VOID memcpy( simpleProfileChar5, value, SIMPLEPROFILE_CHAR5_LEN );
       }
       else
       {
@@ -543,37 +554,41 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
  *
  * @return  bStatus_t
  */
-bStatus_t SimpleProfile_GetParameter(uint8 param, void *value) {
-    bStatus_t ret = SUCCESS;
-    switch (param) {
+bStatus_t SimpleProfile_GetParameter( uint8 param, void *value )
+{
+  bStatus_t ret = SUCCESS;
+  switch ( param )
+  {
     case SIMPLEPROFILE_CHAR1:
-        memcpy(value, simpleProfileChar1, SIMPLEPROFILE_CHAR1_LEN);
-        //      *((uint8*)value) = simpleProfileChar1;
-        break;
+      memcpy(value, simpleProfileChar1, SIMPLEPROFILE_CHAR1_LEN);
+      // *((uint8*)value) = simpleProfileChar1;
+      break;
 
     case SIMPLEPROFILE_CHAR2:
-        memcpy(value, simpleProfileChar2, SIMPLEPROFILE_CHAR2_LEN);
-        //      *((uint8*)value) = simpleProfileChar2;
-        break;
+      memcpy(value, simpleProfileChar2, SIMPLEPROFILE_CHAR2_LEN);
+      // *((uint8*)value) = simpleProfileChar2;
+      break;
 
     case SIMPLEPROFILE_CHAR3:
-        memcpy(value, simpleProfileChar3, SIMPLEPROFILE_CHAR3_LEN);
-        break;
+      memcpy(value, simpleProfileChar3, SIMPLEPROFILE_CHAR3_LEN);
+      // *((uint8*)value) = simpleProfileChar3;
+      break;
 
     case SIMPLEPROFILE_CHAR4:
-        memcpy(value, simpleProfileChar4, SIMPLEPROFILE_CHAR4_LEN);
-        break;
+      memcpy(value, simpleProfileChar4, SIMPLEPROFILE_CHAR4_LEN);
+      // *((uint8*)value) = simpleProfileChar4;
+      break;
 
     case SIMPLEPROFILE_CHAR5:
-        VOID memcpy(value, simpleProfileChar5, SIMPLEPROFILE_CHAR5_LEN);
-        break;
+      VOID memcpy( value, simpleProfileChar5, SIMPLEPROFILE_CHAR5_LEN );
+      break;
 
     default:
-        ret = INVALIDPARAMETER;
-        break;
-    }
+      ret = INVALIDPARAMETER;
+      break;
+  }
 
-    return (ret);
+  return ( ret );
 }
 
 /*********************************************************************
@@ -591,62 +606,69 @@ bStatus_t SimpleProfile_GetParameter(uint8 param, void *value) {
  *
  * @return      SUCCESS, blePending or Failure
  */
-static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle, gattAttribute_t *pAttr, uint8_t *pValue, uint16_t *pLen, uint16_t offset, uint16_t maxLen, uint8_t method) {
-    bStatus_t status = SUCCESS;
+static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle,
+                                          gattAttribute_t *pAttr,
+                                          uint8_t *pValue, uint16_t *pLen,
+                                          uint16_t offset, uint16_t maxLen,
+                                          uint8_t method)
+{
+  bStatus_t status = SUCCESS;
 
-    // Make sure it's not a blob operation (no attributes in the profile are long)
-    if (offset > 0) {
-        return (ATT_ERR_ATTR_NOT_LONG);
+  // Make sure it's not a blob operation (no attributes in the profile are long)
+  if ( offset > 0 )
+  {
+    return ( ATT_ERR_ATTR_NOT_LONG );
+  }
+
+  if ( pAttr->type.len == ATT_BT_UUID_SIZE )
+  {
+    // 16-bit UUID
+    uint16 uuid = BUILD_UINT16( pAttr->type.uuid[0], pAttr->type.uuid[1]);
+    switch ( uuid )
+    {
+      // No need for "GATT_SERVICE_UUID" or "GATT_CLIENT_CHAR_CFG_UUID" cases;
+      // gattserverapp handles those reads
+
+      // characteristics 1 and 2 have read permissions
+      // characteritisc 3 does not have read permissions; therefore it is not
+      //   included here
+      // characteristic 4 does not have read permissions, but because it
+      //   can be sent as a notification, it is included here
+      case SIMPLEPROFILE_CHAR1_UUID:
+        *pLen = SIMPLEPROFILE_CHAR1_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR1_LEN );
+        break;
+
+      case SIMPLEPROFILE_CHAR2_UUID:
+        *pLen = SIMPLEPROFILE_CHAR2_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR2_LEN );
+        break;
+
+      case SIMPLEPROFILE_CHAR4_UUID:
+        *pLen = SIMPLEPROFILE_CHAR4_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR4_LEN );
+        break;
+
+      case SIMPLEPROFILE_CHAR5_UUID:
+        *pLen = SIMPLEPROFILE_CHAR5_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR5_LEN );
+        break;
+
+      default:
+        // Should never get here! (characteristics 3 and 4 do not have read permissions)
+        *pLen = 0;
+        status = ATT_ERR_ATTR_NOT_FOUND;
+        break;
     }
+  }
+  else
+  {
+    // 128-bit UUID
+    *pLen = 0;
+    status = ATT_ERR_INVALID_HANDLE;
+  }
 
-    if (pAttr->type.len == ATT_BT_UUID_SIZE) {
-        // 16-bit UUID
-        uint16 uuid = BUILD_UINT16(pAttr->type.uuid[0], pAttr->type.uuid[1]);
-        switch (uuid) {
-        // No need for "GATT_SERVICE_UUID" or "GATT_CLIENT_CHAR_CFG_UUID" cases;
-        // gattserverapp handles those reads
-
-        // characteristics 1 and 2 have read permissions
-        // characteritisc 3 does not have read permissions; therefore it is not
-        //   included here
-        // characteristic 4 does not have read permissions, but because it
-        //   can be sent as a notification, it is included here
-        case SIMPLEPROFILE_CHAR1_UUID:
-            *pLen = SIMPLEPROFILE_CHAR1_LEN;
-            VOID memcpy(pValue, pAttr->pValue, SIMPLEPROFILE_CHAR1_LEN);
-            break;
-
-        case SIMPLEPROFILE_CHAR2_UUID:
-            //        *pLen = 1;
-            //        pValue[0] = *pAttr->pValue;
-
-            *pLen = SIMPLEPROFILE_CHAR2_LEN;
-            VOID memcpy(pValue, pAttr->pValue, SIMPLEPROFILE_CHAR2_LEN);
-            break;
-
-        case SIMPLEPROFILE_CHAR4_UUID:
-            *pLen = SIMPLEPROFILE_CHAR4_LEN;
-            VOID memcpy(pValue, pAttr->pValue, SIMPLEPROFILE_CHAR4_LEN);
-            break;
-            //      case SIMPLEPROFILE_CHAR5_UUID:
-
-            //        *pLen = SIMPLEPROFILE_CHAR5_LEN;
-            //        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR5_LEN );
-            //        break;
-
-        default:
-            // Should never get here! (characteristics 3 and 4 do not have read permissions)
-            *pLen  = 0;
-            status = ATT_ERR_ATTR_NOT_FOUND;
-            break;
-        }
-    } else {
-        // 128-bit UUID
-        *pLen  = 0;
-        status = ATT_ERR_INVALID_HANDLE;
-    }
-
-    return (status);
+  return ( status );
 }
 
 /*********************************************************************
@@ -663,83 +685,109 @@ static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle, gattAttribute_t *
  *
  * @return  SUCCESS, blePending or Failure
  */
-static bStatus_t simpleProfile_WriteAttrCB(uint16_t connHandle, gattAttribute_t *pAttr, uint8_t *pValue, uint16_t len, uint16_t offset, uint8_t method) {
-    bStatus_t status    = SUCCESS;
-    uint8     notifyApp = 0xFF;
+static bStatus_t simpleProfile_WriteAttrCB(uint16_t connHandle,
+                                           gattAttribute_t *pAttr,
+                                           uint8_t *pValue, uint16_t len,
+                                           uint16_t offset, uint8_t method)
+{
+  bStatus_t status = SUCCESS;
+  uint8 notifyApp = 0xFF;
 
-    if (pAttr->type.len == ATT_BT_UUID_SIZE) {
-        // 16-bit UUID
-        uint16 uuid = BUILD_UINT16(pAttr->type.uuid[0], pAttr->type.uuid[1]);
-        switch (uuid) {
-            // Validate the value
-            // Make sure it's not a blob oper
-            /*
-            if ( offset == 0 )
-            {
-              if ( len != 1 )
-              {
-                status = ATT_ERR_INVALID_VALUE_SIZE;
-              }
-            }
-            else
-            {
-              status = ATT_ERR_ATTR_NOT_LONG;
-            }
-
-            //Write the value
-            if ( status == SUCCESS )
-            {
-              uint8 *pCurValue = (uint8 *)pAttr->pValue;
-              *pCurValue = pValue[0];
-
-              if( pAttr->pValue == &simpleProfileChar1 )
-              {
-                notifyApp = SIMPLEPROFILE_CHAR1;
-              }
-            }
-
-            break;
-            */
-        case SIMPLEPROFILE_CHAR3_UUID:
-            if (offset == 0) {
-                if (len > SIMPLEPROFILE_CHAR3_LEN) {
-                    status = ATT_ERR_INVALID_VALUE_SIZE;
-                }
-            } else {
-                status = ATT_ERR_ATTR_NOT_LONG;
-            }
-
-            // Write the value
-            if (status == SUCCESS) {
-                // Copy pValue into the variable we point to from the attribute table.
-                memcpy(pAttr->pValue + offset, pValue, len);
-                memset(pAttr->pValue + len, 0, SIMPLEPROFILE_CHAR3_LEN - len);
-
-                if (pAttr->pValue == simpleProfileChar3) {
-                    notifyApp = SIMPLEPROFILE_CHAR3;
-                }
-            }
-
-            break;
-        case GATT_CLIENT_CHAR_CFG_UUID:
-            status = GATTServApp_ProcessCCCWriteReq(connHandle, pAttr, pValue, len, offset, GATT_CLIENT_CFG_NOTIFY);
-            break;
-        default:
-            // Should never get here! (characteristics 2 and 4 do not have write permissions)
-            status = ATT_ERR_ATTR_NOT_FOUND;
-            break;
+  if ( pAttr->type.len == ATT_BT_UUID_SIZE )
+  {
+    // 16-bit UUID
+    uint16 uuid = BUILD_UINT16( pAttr->type.uuid[0], pAttr->type.uuid[1]);
+    switch ( uuid )
+    {
+      // case SIMPLEPROFILE_CHAR1_UUID:
+      case SIMPLEPROFILE_CHAR3_UUID:
+        //Validate the value
+        // Make sure it's not a blob oper
+        if ( offset == 0 )
+        {
+          if ( len > SIMPLEPROFILE_CHAR3_LEN )
+          {
+            status = ATT_ERR_INVALID_VALUE_SIZE;
+          }
+        }
+        else
+        {
+          status = ATT_ERR_ATTR_NOT_LONG;
         }
-    } else {
-        // 128-bit UUID
-        status = ATT_ERR_INVALID_HANDLE;
-    }
 
-    // If a characteristic value changed then callback function to notify application of change
-    if ((notifyApp != 0xFF) && simpleProfile_AppCBs && simpleProfile_AppCBs->pfnSimpleProfileChange) {
-        simpleProfile_AppCBs->pfnSimpleProfileChange(notifyApp);
-    }
+        //Write the value
+        if ( status == SUCCESS )
+        {
+          // Copy pValue into the variable we point to from the attribute table.
+          memcpy(pAttr->pValue+offset, pValue, len);
+          memset(pAttr->pValue+len, 0, SIMPLEPROFILE_CHAR3_LEN-len);
 
-    return (status);
+          if( pAttr->pValue == simpleProfileChar3 )
+          {
+            notifyApp = SIMPLEPROFILE_CHAR3;
+          }
+        }
+        break;
+
+      // case SIMPLEPROFILE_CHAR1_UUID:
+      // case SIMPLEPROFILE_CHAR3_UUID:
+
+      //   //Validate the value
+      //   // Make sure it's not a blob oper
+      //   if ( offset == 0 )
+      //   {
+      //     if ( len != 1 )
+      //     {
+      //       status = ATT_ERR_INVALID_VALUE_SIZE;
+      //     }
+      //   }
+      //   else
+      //   {
+      //     status = ATT_ERR_ATTR_NOT_LONG;
+      //   }
+
+      //   //Write the value
+      //   if ( status == SUCCESS )
+      //   {
+      //     uint8 *pCurValue = (uint8 *)pAttr->pValue;
+      //     *pCurValue = pValue[0];
+
+      //     if( pAttr->pValue == &simpleProfileChar1 )
+      //     {
+      //       notifyApp = SIMPLEPROFILE_CHAR1;
+      //     }
+      //     else
+      //     {
+      //       notifyApp = SIMPLEPROFILE_CHAR3;
+      //     }
+      //   }
+
+      //   break;
+
+      case GATT_CLIENT_CHAR_CFG_UUID:
+        status = GATTServApp_ProcessCCCWriteReq( connHandle, pAttr, pValue, len,
+                                                 offset, GATT_CLIENT_CFG_NOTIFY );
+        break;
+
+      default:
+        // Should never get here! (characteristics 2 and 4 do not have write permissions)
+        status = ATT_ERR_ATTR_NOT_FOUND;
+        break;
+    }
+  }
+  else
+  {
+    // 128-bit UUID
+    status = ATT_ERR_INVALID_HANDLE;
+  }
+
+  // If a characteristic value changed then callback function to notify application of change
+  if ( (notifyApp != 0xFF ) && simpleProfile_AppCBs && simpleProfile_AppCBs->pfnSimpleProfileChange )
+  {
+    simpleProfile_AppCBs->pfnSimpleProfileChange( notifyApp );
+  }
+
+  return ( status );
 }
 
 /*********************************************************************

simplelink/ble_sdk_2_02_02_25/src/profiles/simple_profile/simple_gatt_profile.h

@@ -83,10 +83,11 @@ extern "C"
 
 // Length of Characteristic 5 in bytes
 #define SIMPLEPROFILE_CHAR5_LEN           5
-/*user insert*/
 #define SIMPLEPROFILE_CHAR4_LEN           40
 #define SIMPLEPROFILE_CHAR3_LEN           20
 #define SIMPLEPROFILE_CHAR2_LEN           20
+#define SIMPLEPROFILE_CHAR1_LEN           20
+
 /*********************************************************************
  * TYPEDEFS
  */