Modify(#2): remove Display code

simplelink/ble_sdk_2_02_02_25/src/boards/BOOSTXL_CC2650MA/BOOSTXL_CC2650MA.c

@@ -193,49 +193,63 @@ const UDMACC26XX_Config UDMACC26XX_config[] = {
  *  ========================== SPI DMA begin ===================================
  */
 /* Place into subsections to allow the TI linker to remove items properly */
-// #if defined(__TI_COMPILER_VERSION__)
-// #pragma DATA_SECTION(SPI_config, ".const:SPI_config")
-// #pragma DATA_SECTION(spiCC26XXDMAHWAttrs, ".const:spiCC26XXDMAHWAttrs")
-// #endif
+#if defined(__TI_COMPILER_VERSION__)
+#pragma DATA_SECTION(SPI_config, ".const:SPI_config")
+#pragma DATA_SECTION(spiCC26XXDMAHWAttrs, ".const:spiCC26XXDMAHWAttrs")
+#endif
 
-// /* Include drivers */
-// #include <ti/drivers/spi/SPICC26XXDMA.h>
+/* Include drivers */
+#include <ti/drivers/spi/SPICC26XXDMA.h>
 
-// /* SPI objects */
-// SPICC26XXDMA_Object spiCC26XXDMAObjects[BOOSTXL_CC2650MA_SPICOUNT];
+/* SPI objects */
+SPICC26XXDMA_Object spiCC26XXDMAObjects[BOOSTXL_CC2650MA_SPICOUNT];
 
-// /* SPI configuration structure, describing which pins are to be used */
-// const SPICC26XXDMA_HWAttrsV1 spiCC26XXDMAHWAttrs[BOOSTXL_CC2650MA_UDMACOUNT] = {
-//     {
-//         .baseAddr           = SSI0_BASE,
-//         .intNum             = INT_SSI0_COMB,
-//         .intPriority        = ~0,
-//         .swiPriority        = 0,
-//         .powerMngrId        = PowerCC26XX_PERIPH_SSI0,
-//         .defaultTxBufValue  = 0,
-//         .rxChannelBitMask   = 1<<UDMA_CHAN_SSI0_RX,
-//         .txChannelBitMask   = 1<<UDMA_CHAN_SSI0_TX,
-//         .mosiPin            = Board_SPI0_MOSI,
-//         .misoPin            = Board_SPI0_MISO,
-//         .clkPin             = Board_SPI0_CLK,
-//         .csnPin             = Board_SPI0_CS
-//     },
-// };
+/* SPI configuration structure, describing which pins are to be used */
+const SPICC26XXDMA_HWAttrsV1 spiCC26XXDMAHWAttrs[BOOSTXL_CC2650MA_SPICOUNT] = {
+    {
+        .baseAddr           = SSI0_BASE,
+        .intNum             = INT_SSI0_COMB,
+        .intPriority        = ~0,
+        .swiPriority        = 0,
+        .powerMngrId        = PowerCC26XX_PERIPH_SSI0,
+        .defaultTxBufValue  = 0,
+        .rxChannelBitMask   = 1<<UDMA_CHAN_SSI0_RX,
+        .txChannelBitMask   = 1<<UDMA_CHAN_SSI0_TX,
+        .mosiPin            = Board_SPI0_MOSI,
+        .misoPin            = Board_SPI0_MISO,
+        .clkPin             = Board_SPI0_CLK,
+        .csnPin             = Board_SPI0_CS
+    },
+    {
+        .baseAddr           = SSI1_BASE,
+        .intNum             = INT_SSI1_COMB,
+        .intPriority        = ~0,
+        .swiPriority        = 0,
+        .powerMngrId        = PowerCC26XX_PERIPH_SSI1,
+        .defaultTxBufValue  = 0,
+        .rxChannelBitMask   = 1<<UDMA_CHAN_SSI1_RX,
+        .txChannelBitMask   = 1<<UDMA_CHAN_SSI1_TX,
+        .mosiPin            = Board_SPI1_MOSI,
+        .misoPin            = Board_SPI1_MISO,
+        .clkPin             = Board_SPI1_CLK,
+        .csnPin             = Board_SPI1_CS
+    },  
+};
 
-// /* SPI configuration structure */
-// const SPI_Config SPI_config[] = {
-//     {
-//          .fxnTablePtr = &SPICC26XXDMA_fxnTable,
-//          .object      = &spiCC26XXDMAObjects[0],
-//          .hwAttrs     = &spiCC26XXDMAHWAttrs[0]
-//     },
-//     {
-//          .fxnTablePtr = &SPICC26XXDMA_fxnTable,
-//          .object      = &spiCC26XXDMAObjects[1],
-//          .hwAttrs     = &spiCC26XXDMAHWAttrs[1]
-//     },
-//     {NULL, NULL, NULL}
-// };
+/* SPI configuration structure */
+const SPI_Config SPI_config[] = {
+    {
+         .fxnTablePtr = &SPICC26XXDMA_fxnTable,
+         .object      = &spiCC26XXDMAObjects[0],
+         .hwAttrs     = &spiCC26XXDMAHWAttrs[0]
+    },
+    {
+         .fxnTablePtr = &SPICC26XXDMA_fxnTable,
+         .object      = &spiCC26XXDMAObjects[1],
+         .hwAttrs     = &spiCC26XXDMAHWAttrs[1]
+    },
+    {NULL, NULL, NULL}
+};
 /*
  *  ========================== SPI DMA end =====================================
 */
@@ -423,3 +437,44 @@ const PWM_Config PWM_config[BOOSTXL_CC2650MA_PWMCOUNT + 1] = {
 /*
  *  ============================= PWM end ======================================
  */
+
+/*
+ *  ============================= I2C Begin=====================================
+*/
+/* Place into subsections to allow the TI linker to remove items properly */
+#if defined(__TI_COMPILER_VERSION__)
+#pragma DATA_SECTION(I2C_config, ".const:I2C_config")
+#pragma DATA_SECTION(i2cCC26xxHWAttrs, ".const:i2cCC26xxHWAttrs")
+#endif
+
+/* Include drivers */
+#include <ti/drivers/i2c/I2CCC26XX.h>
+
+/* I2C objects */
+I2CCC26XX_Object i2cCC26xxObjects[BOOSTXL_CC2650MA_I2CCOUNT];
+
+/* I2C configuration structure, describing which pins are to be used */
+const I2CCC26XX_HWAttrsV1 i2cCC26xxHWAttrs[BOOSTXL_CC2650MA_I2CCOUNT] = {
+    {
+        .baseAddr = I2C0_BASE,
+        .powerMngrId = PowerCC26XX_PERIPH_I2C0,
+        .intNum = INT_I2C_IRQ,
+        .intPriority = ~0,
+        .swiPriority = 0,
+        .sdaPin = Board_I2C0_SDA0,
+        .sclPin = Board_I2C0_SCL0,
+    }
+};
+
+/* I2C configuration structure */
+const I2C_Config I2C_config[] = {
+    {
+        .fxnTablePtr = &I2CCC26XX_fxnTable,
+        .object = &i2cCC26xxObjects[0],
+        .hwAttrs = &i2cCC26xxHWAttrs[0]
+    },
+    {NULL, NULL, NULL}
+};
+/*
+ *  ========================== I2C end =========================================
+ */

simplelink/ble_sdk_2_02_02_25/src/boards/BOOSTXL_CC2650MA/BOOSTXL_CC2650MA.h

@@ -50,6 +50,7 @@ extern "C" {
  *  ==========================================================================*/
 #include <ti/drivers/PIN.h>
 #include <driverlib/ioc.h>
+// #include "application_config/application_config.h"
 
 /** ============================================================================
  *  Externs
@@ -145,12 +146,6 @@ extern const PIN_Config BoardGpioInitTable[];
 #define Board_UART_TX                  Board_BP_UART_Rx          /* RXD */
 #define Board_UART_RX                  Board_BP_UART_Tx          /* TXD */
 
-// /* SPI Board */
-// #define Board_SPI0_MISO                Board_BP_SPI_MISO
-// #define Board_SPI0_MOSI                Board_BP_SPI_MOSI
-// #define Board_SPI0_CLK                 Board_BP_SPI_CLK
-// #define Board_SPI0_CS                  Board_BP_SPI_CS_Wireless
-
 /* Power Management Board */
 #define Board_SRDY                     Board_BP_Pin_J2_19
 #define Board_MRDY                     Board_BP_Pin_J1_2
@@ -165,12 +160,43 @@ extern const PIN_Config BoardGpioInitTable[];
 #define Board_PWMPIN6                  PIN_UNASSIGNED
 #define Board_PWMPIN7                  PIN_UNASSIGNED
 
+/* SPI & I2C Board */
+#ifndef DEF_ELITE_MODEL
+#define Board_SPI0_MISO                Board_BP_SPI_MISO
+#define Board_SPI0_MOSI                Board_BP_SPI_MOSI
+#define Board_SPI0_CLK                 Board_BP_SPI_CLK
+#define Board_SPI0_CS                  Board_BP_SPI_CS_Wireless
+
+#define Board_SPI1_MISO                PIN_UNASSIGNED
+#define Board_SPI1_MOSI                PIN_UNASSIGNED
+#define Board_SPI1_CLK                 PIN_UNASSIGNED
+#define Board_SPI1_CS                  PIN_UNASSIGNED
+
+#define Board_I2C0_SCL0                PIN_UNASSIGNED 
+#define Board_I2C0_SDA0                PIN_UNASSIGNED
+#else
+#define Board_SPI0_MISO                E_SPI0_MISO
+#define Board_SPI0_MOSI                E_SPI0_MOSI
+#define Board_SPI0_CLK                 E_SPI0_CLK
+#define Board_SPI0_CS                  E_SPI0_CS
+
+#define Board_SPI1_MISO                E_SPI1_MISO
+#define Board_SPI1_MOSI                E_SPI1_MOSI
+#define Board_SPI1_CLK                 E_SPI1_CLK
+#define Board_SPI1_CS                  E_SPI1_CS
+
+#define Board_I2C0_SCL0                E_I2C0_SCL0 
+#define Board_I2C0_SDA0                E_I2C0_SDA0
+#endif
+
 /** ============================================================================
  *  Instance identifiers
  *  ==========================================================================*/
 /* Generic SPI instance identifiers */
 #define Board_SPI0                  BOOSTXL_CC2650MA_SPI0
 #define Board_SPI1                  BOOSTXL_CC2650MA_SPI1
+/* Generic I2C instance identifiers */
+#define Board_I2C0                  BOOSTXL_CC2650MA_I2C0
 /* Generic UART instance identifiers */
 #define Board_UART                  BOOSTXL_CC2650MA_UART0
 /* Generic TRNG instance identiifer */
@@ -209,15 +235,16 @@ typedef enum BOOSTXL_CC2650MA_CryptoName {
 } BOOSTXL_CC2650MA_CryptoName;
 
 
-// /*!
-//  *  @def    BOOSTXL_CC2650MA_SPIName
-//  *  @brief  Enum of SPI names on the CC2650 Booster Pack
-//  */
-// typedef enum BOOSTXL_CC2650MA_SPIName {
-//     BOOSTXL_CC2650MA_SPI0 = 0,
+/*!
+ *  @def    BOOSTXL_CC2650MA_SPIName
+ *  @brief  Enum of SPI names on the CC2650 Booster Pack
+ */
+typedef enum BOOSTXL_CC2650MA_SPIName {
+    BOOSTXL_CC2650MA_SPI0 = 0,
+    BOOSTXL_CC2650MA_SPI1 = 1,
 
-//     BOOSTXL_CC2650MA_SPICOUNT
-// } BOOSTXL_CC2650MA_SPIName;
+    BOOSTXL_CC2650MA_SPICOUNT
+} BOOSTXL_CC2650MA_SPIName;
 
 /*!
  *  @def    BOOSTXL_CC2650MA_TRNGName
@@ -295,6 +322,16 @@ typedef enum BOOSTXL_CC2650MA_PWM
     BOOSTXL_CC2650MA_PWMCOUNT
 } BOOSTXL_CC2650MA_PWM;
 
+/*!
+ *  @def    BOOSTXL_CC2650MA_I2CName
+ *  @brief  Enum of I2C names on the CC2650 Booster Pack
+ */
+typedef enum BOOSTXL_CC2650MA_I2CName {
+    BOOSTXL_CC2650MA_I2C0 = 0,
+
+    BOOSTXL_CC2650MA_I2CCOUNT
+} BOOSTXL_CC2650MA_I2CName;
+
 #ifdef __cplusplus
 }
 #endif

simplelink/ble_sdk_2_02_02_25/src/boards/BOOSTXL_CC2650MA/Board.h

@@ -60,6 +60,7 @@ extern "C" {
 #define     Board_initGPIO()
 #define     Board_initPWM()         PWM_init()
 #define     Board_initSPI()         SPI_init()
+#define     Board_initI2C()         I2C_init()
 #define     Board_initUART()        UART_init()
 #define     Board_initWatchdog()    Watchdog_init()
 #define     GPIO_toggle(n)

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite.json

@@ -1,179 +0,0 @@
-{
-  "name": "Elite-ZM",
-  "version": "1.2.30",
-  "match_rule": {
-    "local_name_pattern": "Elite-ZM.+",
-    "major_product_number": 0,
-    "minor_product_number": 2,
-    "major_version_number": 1,
-    "minor_version_number": 2
-  },
-  "constant": {
-    "ADC_CHANNEL_NUMBER": [
-      12,
-      13,
-      14,
-      15
-    ],
-    "VOLT_MAX": 4095
-  },
-  "parameters": {
-    "CHANNEL": {
-      "description": "record channels",
-      "record_meta": true,
-      "domain": "property",
-      "value": [
-        0,
-        1,
-        2
-      ]
-    },
-    "SAMPLE_RATE": {
-      "description": "data sampling rate",
-      "record_meta": true,
-      "domain": "constant",
-      "value": 1
-    },
-    "AMP_GAIN": {
-      "description": "amp gain",
-      "record_meta": true,
-      "domain": "constant",
-      "value": 1
-    },
-    "MODE": {
-      "description": "working mode",
-      "value": [
-        "I-V Curve",
-        "Cyclic Voltammetry",
-        "Function Generator",
-        "Z-T Curve",
-        "V-T Curve",
-        "I-T Curve",
-        "ADC test"
-      ]
-    },
-    "VOLT_ORIGIN": {
-      "description": "Origin Voltage of Scan",
-      "domain": [
-        "VOLT_MAX"
-      ]
-    },
-    "VOLT_FINAL": {
-      "description": "The last Voltage of Scan",
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": "1365 * VALUE"
-    },
-    "VOLT_STEP": {
-      "description": "Voltage Step",
-      "domain": [
-        5
-      ]
-    },
-    "STEP_TIME": {
-      "description": "How much time between two step",
-      "domain": [
-        4
-      ]
-    },
-    "DAC_VOLT": {
-      "description": "DAC output Voltage",
-      "domain": [
-        "VOLT_MAX"
-      ]
-    },
-    "ADC_CHANNEL": {
-      "description": "read ADC data",
-      "value": [
-        "ANA0",
-        "ANA1",
-        "ANA2",
-        "ANA3"
-      ]
-    }
-  },
-  "instruction": {
-    "start": [
-      {
-        "expression": "MODE",
-        "when": {
-          "0": "curve_iv",
-          "1": "curve_cv",
-          "2": "func_gen",
-          "6": "adc_test"
-        }
-      }
-    ],
-    "data_format": [
-      "_data_format('TDC4VAF2')"
-    ],
-    "curve_iv": [
-      "data_format",
-      "_notify(True)",
-      "curve_iv0",
-      "_sync(True)",
-      "VIS_STI"
-    ],
-    "curve_iv0": {
-      "type": "RIS",
-      "parameter": {
-        "va": "(VOLT_ORIGIN + 1) * 0x0010",
-        "vb": "(VOLT_FINAL + 1) * 0x0010",
-        "dv": "VOLT_STEP * 0x40",
-        "dt": "STEP_TIME * 0x12"
-      },
-      "data": [
-        "1X10;2B>va;2B>vb;B>dv;B>dt"
-      ]
-    },
-    "curve_cv": [
-      "data_format",
-      "_notify(True)",
-      "curve_cv0",
-      "_sync(True)",
-      "VIS_STI"
-    ],
-    "curve_cv0": {
-      "type": "RIS",
-      "parameter": {
-        "va": "(VOLT_ORIGIN + 1) * 0x0010",
-        "vb": "(VOLT_FINAL + 1) * 0x0010",
-        "dv": "VOLT_STEP * 0x40",
-        "dt": "STEP_TIME * 0x12"
-      },
-      "data": [
-        "1X20;2B>va;2B>vb;B>dv;B>dt"
-      ]
-    },
-    "func_gen": [
-      "data_format",
-      "func_gen0",
-      "VIS_STI"
-    ],
-    "func_gen0": {
-      "type": "RIS",
-      "parameter": {
-        "v": "(DAC_VOLT + 1) * 0x0010"
-      },
-      "data": [
-        "X30;X30;2B>v"
-      ]
-    },
-    "adc_test": [
-      "data_format",
-      "_notify(True)",
-      "adc_test0",
-      "_sync(True)",
-      "VIS_STI"
-    ],
-    "adc_test0": {
-      "type": "RIS",
-      "data": [
-        "X90;B>ADC_CHANNEL"
-      ]
-    }
-  }
-}
-
-

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite15_PIN.h

@@ -1,246 +0,0 @@
-
-#ifndef Elite15_PIN
-#define Elite_15PIN
-
-#include "Elite_PIN.h"
-
-static void update_latch_status (uint32_t latch_num, uint32_t elite_pin, bool highlow) {
-    switch (latch_num) {
-        case LOAD0: {
-            switch (elite_pin) {
-                case D0: {
-                    LH.LATCH0[0] = highlow;
-                    break;
-                }
-                case D1: {
-                    LH.LATCH0[1] = highlow;
-                    break;
-                }
-                case D2: {
-                    LH.LATCH0[2] = highlow;
-                    break;
-                }
-                case D3: {
-                    LH.LATCH0[3] = highlow;
-                    break;
-                }
-                case D4: {
-                    LH.LATCH0[4] = highlow;
-                    break;
-                }
-                case D5: {
-                    LH.LATCH0[5] = highlow;
-                    break;
-                }
-                case D6: {
-                    LH.LATCH0[6] = highlow;
-                    break;
-                }
-                case D7: {
-                    LH.LATCH0[7] = highlow;
-                    break;
-                }
-                default: {
-                    break;
-                }
-            }
-            break;
-        }
-        case LOAD1: {
-            switch (elite_pin) {
-                case D0: {
-                    LH.LATCH1[0] = highlow;
-                    break;
-                }
-                case D1: {
-                    LH.LATCH1[1] = highlow;
-                    break;
-                }
-                case D2: {
-                    LH.LATCH1[2] = highlow;
-                    break;
-                }
-                case D3: {
-                    LH.LATCH1[3] = highlow;
-                    break;
-                }
-                case D4: {
-                    LH.LATCH1[4] = highlow;
-                    break;
-                }
-                case D5: {
-                    LH.LATCH1[5] = highlow;
-                    break;
-                }
-                case D6: {
-                    LH.LATCH1[6] = highlow;
-                    break;
-                }
-                case D7: {
-                    LH.LATCH1[7] = highlow;
-                    break;
-                }
-                default: {
-                    break;
-                }
-            }
-            break;
-        }
-        case LOAD2: {
-            switch (elite_pin) {
-                case D0: {
-                    LH.LATCH2[0] = highlow;
-                    break;
-                }
-                case D1: {
-                    LH.LATCH2[1] = highlow;
-                    break;
-                }
-                case D2: {
-                    LH.LATCH2[2] = highlow;
-                    break;
-                }
-                case D3: {
-                    LH.LATCH2[3] = highlow;
-                    break;
-                }
-                case D4: {
-                    LH.LATCH2[4] = highlow;
-                    break;
-                }
-                case D5: {
-                    LH.LATCH2[5] = highlow;
-                    break;
-                }
-                case D6: {
-                    LH.LATCH2[6] = highlow;
-                    break;
-                }
-                case D7: {
-                    LH.LATCH2[7] = highlow;
-                    break;
-                }
-                default: {
-                    break;
-                }
-            }
-             break;
-        }
-        default: {
-            break;
-        }
-    }
-}
-
-static void PIN15_setOutputValue (uint32_t latch_num, uint32_t pin_num, bool highlow) {
-    ELITE15_SPI_CLOSE();
-    add_elite_pin();
-    update_latch_status (latch_num, pin_num, highlow);
-//    PIN_setOutputValue(&ZM_rst, latch_num, 1);               // Turn on latch
-
-    switch (latch_num) {
-        case LOAD0: {
-//            PIN_setOutputValue(&ZM_rst, D0, LH.LATCH0[0]);
-//            PIN_setOutputValue(&ZM_rst, D1, LH.LATCH0[1]);
-//            PIN_setOutputValue(&ZM_rst, D2, LH.LATCH0[2]);
-//            PIN_setOutputValue(&ZM_rst, D3, LH.LATCH0[3]);
-            PIN_setOutputValue(pin_handle, D4, LH.LATCH0[4]);
-            PIN_setOutputValue(pin_handle, D5, LH.LATCH0[5]);
-            PIN_setOutputValue(pin_handle, D6, LH.LATCH0[6]);
-            PIN_setOutputValue(pin_handle, D7, LH.LATCH0[7]);
-            break;
-        }
-        case LOAD1: {
-            PIN_setOutputValue(pin_handle, D0, LH.LATCH1[0]);
-            PIN_setOutputValue(pin_handle, D1, LH.LATCH1[1]);
-            PIN_setOutputValue(pin_handle, D2, LH.LATCH1[2]);
-            PIN_setOutputValue(pin_handle, D3, LH.LATCH1[3]);
-            PIN_setOutputValue(pin_handle, D4, LH.LATCH1[4]);
-            PIN_setOutputValue(pin_handle, D5, LH.LATCH1[5]);
-            PIN_setOutputValue(pin_handle, D6, LH.LATCH1[6]);
-            PIN_setOutputValue(pin_handle, D7, LH.LATCH1[7]);
-            break;
-        }
-        case LOAD2: {
-            PIN_setOutputValue(pin_handle, D0, LH.LATCH2[0]);
-            PIN_setOutputValue(pin_handle, D1, LH.LATCH2[1]);
-            PIN_setOutputValue(pin_handle, D2, LH.LATCH2[2]);
-            PIN_setOutputValue(pin_handle, D3, LH.LATCH2[3]);
-            PIN_setOutputValue(pin_handle, D4, LH.LATCH2[4]);
-            PIN_setOutputValue(pin_handle, D5, LH.LATCH2[5]);
-            PIN_setOutputValue(pin_handle, D6, LH.LATCH2[6]);
-            PIN_setOutputValue(pin_handle, D7, LH.LATCH2[7]);
-            break;
-        }
-        default: {
-            break;
-        }
-    }
-    PIN_setOutputValue(&ZM_rst, latch_num, 1);               // Turn on latch
-    CPUdelay(10);
-    PIN_setOutputValue(&ZM_rst, latch_num, 0);               // Turn off latch
-    remove_elite_pin();
-    ELITE15_SPI_HOLD();
-}
-
-static void Init_Elite15_PIN () {
-    InitLH();
-    add_elite_pin();
-
-    PIN_setOutputValue(pin_handle, D0, 0);
-    PIN_setOutputValue(pin_handle, D1, 0);
-    PIN_setOutputValue(pin_handle, D2, 0);
-    PIN_setOutputValue(pin_handle, D3, 0);
-    PIN_setOutputValue(pin_handle, D4, 0);
-    PIN_setOutputValue(pin_handle, D5, 0);
-    PIN_setOutputValue(pin_handle, D6, 0);
-    PIN_setOutputValue(pin_handle, D7, 0);
-    PIN_setOutputValue(pin_handle, LOAD0, 0);
-    PIN_setOutputValue(pin_handle, LOAD1, 1);
-    PIN_setOutputValue(pin_handle, LOAD2, 1);
-    CPUdelay(10);
-    PIN_setOutputValue(pin_handle, LOAD1, 0);
-    PIN_setOutputValue(pin_handle, LOAD2, 0);
-
-
-    PIN_setOutputValue(pin_handle, D0, 0);
-    PIN_setOutputValue(pin_handle, D1, 0);
-    PIN_setOutputValue(pin_handle, D2, 0);
-    PIN_setOutputValue(pin_handle, D3, 0);
-    PIN_setOutputValue(pin_handle, D4, 1);
-    PIN_setOutputValue(pin_handle, D5, 1);
-    PIN_setOutputValue(pin_handle, D6, 1);
-    PIN_setOutputValue(pin_handle, D7, 1);
-    CPUdelay(10);
-    PIN_setOutputValue(pin_handle, LOAD0, 1);
-    PIN_setOutputValue(pin_handle, LOAD0, 0);
-
-    remove_elite_pin();
-
-//    InitLH();
-//    add_elite_pin();
-//
-//    PIN_setOutputValue(pin_handle, LOAD0, 1);
-//    PIN_setOutputValue(pin_handle, LOAD1, 1);
-//    PIN_setOutputValue(pin_handle, LOAD2, 1);
-//    CPUdelay(10);
-//    PIN_setOutputValue(pin_handle, D0, 0);
-//    PIN_setOutputValue(pin_handle, D1, 0);
-//    PIN_setOutputValue(pin_handle, D2, 0);
-//    PIN_setOutputValue(pin_handle, D3, 0);
-//    PIN_setOutputValue(pin_handle, D4, 0);
-//    PIN_setOutputValue(pin_handle, D5, 0);
-//    PIN_setOutputValue(pin_handle, D6, 0);
-//    PIN_setOutputValue(pin_handle, D7, 0);
-//    CPUdelay(10);
-//    PIN_setOutputValue(pin_handle, LOAD0, 0);
-//    PIN_setOutputValue(pin_handle, LOAD1, 0);
-//    PIN_setOutputValue(pin_handle, LOAD2, 0);
-//
-//    remove_elite_pin();
-}
-
-
-
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteADC.h

@@ -1,606 +0,0 @@
-
-#ifndef EliteADC
-#define EliteADC
-
-#include "Elite_PIN.h"
-#include "EliteSPI.h"
-#include "EliteNotify.h"
-
-// Elite ADC macro
-// ADC command, Elite will use these cmd to control ADC
-#define CMD_CURRENT_MEASURE 0xC5
-#define CMD_VOLT_MEASURE    0xD5
-#define CMD_DAC_MEASURE     0xE5
-#define CMD_BATTERY_MEASURE 0xF1
-
-// controller command, these are command from control box
-#define ADC_CH_CURRENT      0x00
-#define ADC_CH_VOLT         0x01
-#define ADC_CH_DAC          0x02
-#define ADC_CH_BAT          0x03
-
-static void ADC_write(uint8_t ADCin) {
-   /*
-    *   This function can only define [15]~[8] through ADCin
-    *   [7]~[0] should always be 0b11101011
-    *
-    *   [15]        : SS, 0 = no effect, 1 = start work, default 0b0
-    *   [14]~[12]   : MUX[2:0], default 0b000
-    *   [11]~[9]    : PGA[2:0], default 0b010 = FSR is ±2.048
-    *   [8]         : mode, 0 = continuous, 1 = one shot, default 0b1 (Power-down and single-shot mode )
-    *
-    *   [7]~[5]     : data rate, default 0b100 = 128 SPS
-    *   [4]         : Temperature? default 0b0 = ADC mode
-    *   [3]         : Pullup enable, default 0b1 = Pullup resistor enabled
-    *   [2]~[1]     : NOP, default 0b01
-    *   [0]         : reserved, default 0b1
-    *
-    */
-
-//    spi_ADC_txbuf[0] = 0b00000101;
-    for(int i=0 ; i<SPI_ADC_SIZE ; i++){
-        spi_ADC_txbuf[i] = 0;
-        spi_ADC_rxbuf[i] = 0;
-    }
-
-    spi_ADC_txbuf[0] = ADCin;
-    spi_ADC_txbuf[1] = 0b11101011;
-
-    ADC_SPI(2, spi_ADC_txbuf, spi_ADC_rxbuf);
-}
-
-static void ADC_read(uint8_t *ADCdata){
-    for(int i=0 ; i<SPI_ADC_SIZE ; i++){
-        spi_ADC_txbuf[i] = 0;
-        spi_ADC_rxbuf[i] = 0;
-    }
-
-    ADC_SPI(2, spi_ADC_txbuf, spi_ADC_rxbuf);
-}
-
-/* Elite1.5 Calibration Usage */
-static void CAL_ADC_read(uint8_t *ADCdata){
-     for(int i=0 ; i<SPI_ADC_SIZE ; i++){
-         spi_ADC_txbuf[i] = 0;
-         spi_ADC_rxbuf[i] = 0;
-     }
-
-     CAL_ADC_SPI(SPI_ADC_SIZE, spi_ADC_txbuf, ADCdata);
- }
-
-static void CAL_ADC_write(uint8_t ADCin) {
-    for(int i=0 ; i<SPI_ADC_SIZE ; i++){
-        spi_ADC_txbuf[i] = 0;
-        spi_ADC_rxbuf[i] = 0;
-    }
-
-    spi_ADC_txbuf[0] = ADCin;
-    spi_ADC_txbuf[1] = 0b11101011;
-
-    CAL_ADC_SPI(2, spi_ADC_txbuf, spi_ADC_rxbuf);
-}
-
-/* Gain Control for Vin & Iin */
-static void IinADCGainControl(uint8_t IinADCLevel){
-    if(IinADCLevel == 0){
-        // ADC gain level = 0, using 3M resister
-        PIN15_setOutputValue(Turnon_I_LARGE, 0);
-        PIN15_setOutputValue(Turnon_I_MID, 0);
-        PIN15_setOutputValue(Turnon_I_SMALL, 0);
-    }
-    else if(IinADCLevel == 1){
-        // ADC gain level = 1, using 100K resister
-        PIN15_setOutputValue(Turnon_I_LARGE, 0);
-        PIN15_setOutputValue(Turnon_I_MID, 0);
-        PIN15_setOutputValue(Turnon_I_SMALL, 1);
-    }
-    else if(IinADCLevel == 2){
-        // ADC gain level = 2, using 3K resister
-        PIN15_setOutputValue(Turnon_I_LARGE, 0);
-        PIN15_setOutputValue(Turnon_I_MID, 1);
-        PIN15_setOutputValue(Turnon_I_SMALL, 0);
-    }
-    else if(IinADCLevel == 3){
-        // ADC gain level = 3, using 100R resistor
-        PIN15_setOutputValue(Turnon_I_LARGE, 1);
-        PIN15_setOutputValue(Turnon_I_MID, 0);
-        PIN15_setOutputValue(Turnon_I_SMALL, 0);
-    }
-    else if(IinADCLevel == 4){
-        // ADC gain level = 3, auto gain (using 100R resister)
-        PIN15_setOutputValue(Turnon_I_LARGE, 1);
-        PIN15_setOutputValue(Turnon_I_MID, 0);
-        PIN15_setOutputValue(Turnon_I_SMALL, 0);
-    }
-    else{
-        // default using 100R resister
-        PIN15_setOutputValue(Turnon_I_LARGE, 1);
-        PIN15_setOutputValue(Turnon_I_MID, 0);
-        PIN15_setOutputValue(Turnon_I_SMALL, 0);
-    }
-
-    if(IinADCLevel == 0 || IinADCLevel == 1 || IinADCLevel == 2 || IinADCLevel == 3){
-        lastIinADCGainLevel = IinADCLevel;
-    }else{
-        lastIinADCGainLevel = 3;
-    }
-}
-
-static void VinADCGainControl(uint8_t VinADCLevel){
-    if(VinADCLevel == 0){
-        // Vin ADC gain level = 0, using 1M resister
-        PIN15_setOutputValue(Turnon_V_SMALL, 0);
-        PIN15_setOutputValue(Turnon_V_MID, 0);
-    }
-    else if(VinADCLevel == 1){
-        // Vin ADC gain level = 1, using 30K resister
-        PIN15_setOutputValue(Turnon_V_SMALL, 0);
-        PIN15_setOutputValue(Turnon_V_MID, 1);
-    }
-    else if(VinADCLevel == 2){
-        // Vin ADC gain level = 2, using 1K resister
-        PIN15_setOutputValue(Turnon_V_SMALL, 1);
-        PIN15_setOutputValue(Turnon_V_MID, 0);
-    }
-    else if(VinADCLevel == 3){
-        // Vin ADC gain level = 3, auto gain (using 1K resister)
-        PIN15_setOutputValue(Turnon_V_SMALL, 1);
-        PIN15_setOutputValue(Turnon_V_MID, 0);
-    }
-    else{
-        // default using 1K resister
-        PIN15_setOutputValue(Turnon_V_SMALL, 1);
-        PIN15_setOutputValue(Turnon_V_MID, 0);
-    }
-
-    if(VinADCLevel == 0 || VinADCLevel == 1 || VinADCLevel == 2){
-        lastVinADCGainLevel = VinADCLevel;
-    }else{
-        lastVinADCGainLevel = 2;
-    }
-}
-
-static void ADCChannelSelect(uint8_t ADCChannel){
-    // set ADC parameter
-    // 0xC1~F1 = reading AIN0~AIN3. Using FSR+-6V, resolution = 187.5uV
-    // 0xC5~F5 = reading AIN0~AIN3. Using FSR+-2V, resolution = 62.5 uV
-    switch(ADCChannel){
-        // AINp is AIN0; AINn is GND
-        // measure AIN0, which is a current measure
-        case ADC_CH_CURRENT :{
-            ADC_write(CMD_CURRENT_MEASURE);
-            break;
-        }
-
-        // AINp is AIN1; AINn is GND
-        // AIN1, which is a volt measure
-        case ADC_CH_VOLT :{
-            ADC_write(CMD_VOLT_MEASURE);
-            break;
-        }
-
-        // AINp is AIN2; AINn is GND
-        // AIN2, measure DAC voltage (Note that this is NOT DAC real output value!!)
-        case ADC_CH_DAC :{
-            ADC_write(CMD_DAC_MEASURE);
-            break;
-        }
-
-        // measure battery volt
-        case ADC_CH_BAT :{
-            ADC_write(CMD_BATTERY_MEASURE);
-            break;
-        }
-        default :{
-            break;
-        }
-    }
-}
-
-static void ReadADCIin(uint8_t *buf){
-    // Read data twice since the first data we get is previous data
-//    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-    ADCChannelSelect(ADC_CH_CURRENT);
-    ADC_read(buf);
-
-    ADCChannelSelect(ADC_CH_CURRENT);
-    ADC_read(buf);
-}
-
-static void ReadADCVin(uint8_t *buf){
-    // Read data twice since the first data we get is previous data
-
-//    VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-    ADCChannelSelect(ADC_CH_VOLT);
-    ADC_read(buf);
-
-    ADCChannelSelect(ADC_CH_VOLT);
-    ADC_read(buf);
-}
-
-static void ReadADCVout(uint8_t *buf){
-    // Read data twice since the first data we get is previous data
-    ADCChannelSelect(ADC_CH_DAC);
-    ADC_read(buf);
-
-    ADCChannelSelect(ADC_CH_DAC);
-    ADC_read(buf);
-}
-
-static void ReadADCBat(uint8_t *buf){
-    // Read data twice since the first data we get is previous data
-    ADCChannelSelect(ADC_CH_BAT);
-    ADC_read(buf);
-
-    ADCChannelSelect(ADC_CH_BAT);
-    ADC_read(buf);
-}
-
-/* for Elite1.5-re */
-// Iin theoretical boundary <2.67, 1.89~80, 63~2600, >1900 (uA)
-/* Old boundary
-#define I_GAIN_SMALL_BOUNDARY     4000  // 4    uA =     4,000,000 pA
-#define I_GAIN_MID1_BOUNDARY1     2000  // 2    uA =     2,000,000 pA
-#define I_GAIN_MID1_BOUNDARY2    90000  // 90   uA =    90,000,000 pA
-#define I_GAIN_MID2_BOUNDARY1    70000  // 70   uA =    70,000,000 pA
-#define I_GAIN_MID2_BOUNDARY2  1800000  // 1800 uA =     1,800,000 nA
-#define I_GAIN_LARGE_BOUNDARY   950000  // 950  uA =       950,000 nA
-*/
-#define I_GAIN_SMALL_BOUNDARY     4000  // 4    uA =     4,000,000 pA
-#define I_GAIN_MID1_BOUNDARY1     2500  // 2.5  uA =     2,500,000 pA
-#define I_GAIN_MID1_BOUNDARY2   100000  // 100  uA =   100,000,000 pA
-#define I_GAIN_MID2_BOUNDARY1    85000  // 85   uA =    85,000,000 pA
-#define I_GAIN_MID2_BOUNDARY2  2050000  // 2050 uA =     2,050,000 nA
-#define I_GAIN_LARGE_BOUNDARY  1800000  // 1800 uA =     1,800,000 nA
-
-// Vin theoretical boundary <7, 5~200, >100 (mV)
-#define VIN_GAIN_SMALL_BOUNDARY   7000  // 7    mV =     7,000,000 nV
-#define VIN_GAIN_MID1_BOUNDARY1   5000  // 5    mV =     5,000,000 nV
-#define VIN_GAIN_MID1_BOUNDARY2 300000  // 300  mV =   300,000,000 nV
-#define VIN_GAIN_LARGE_BOUNDARY 250000  // 250  mV =   250,000,000 nV
-
-static int32_t AutoGainReadIin(uint8_t *buf){
-     int32_t RealCurrent = 0;
-
-     ReadADCIin(spi_ADC_rxbuf);
-     RealCurrent = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
-
-     return RealCurrent;
- }
-
-static int32_t AutoGainReadVin(uint8_t *buf){
-    int32_t RealVolt = 0;
-
-    ReadADCVin(spi_ADC_rxbuf);
-    RealVolt = DecodeADCValue(INSTRUCTION.VinADCGainLevel, ADC_CH_VOLT, spi_ADC_rxbuf);
-
-    return RealVolt;
-}
-
-static void AutoGainChangeIin(int32_t RealCurrent){
-    // switch to 1 level current(small)   3M
-    // switch to 2 level current        100K
-    // switch to 3 level current          3K
-    // switch to 4 level current(large) 100R
-    if(INSTRUCTION.ADCGainLevel == I_GAIN_100R){
-        if(RealCurrent < I_GAIN_LARGE_BOUNDARY && RealCurrent > -1*I_GAIN_LARGE_BOUNDARY){
-            // switch to 1 level current(small)
-            if (RealCurrent < I_GAIN_MID1_BOUNDARY1 && RealCurrent > -1*I_GAIN_MID1_BOUNDARY1){
-                I_GAIN_3M_counter++;
-                if(I_GAIN_3M_counter > 2){
-                    INSTRUCTION.ADCGainLevel = I_GAIN_3M;
-                    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                    I_GAIN_3M_counter = 0;
-                    record_flag = false;
-                }
-            }
-            // switch to 2 level current
-            else if (RealCurrent < I_GAIN_MID2_BOUNDARY1 && RealCurrent > -1*I_GAIN_MID2_BOUNDARY1){
-                I_GAIN_100K_counter++;
-                if(I_GAIN_100K_counter > 2){
-                    INSTRUCTION.ADCGainLevel = I_GAIN_100K;
-                    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                    I_GAIN_100K_counter = 0;
-                    record_flag = false;
-                }
-            }
-            // switch to 3 level current
-            else{
-                I_GAIN_3K_counter++;
-                if(I_GAIN_3K_counter > 2){
-                    INSTRUCTION.ADCGainLevel = I_GAIN_3K;
-                    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                    I_GAIN_3K_counter = 0;
-                    record_flag = false;
-                }
-            }
-        }else{
-            if(I_GAIN_3K_counter > 0){
-                I_GAIN_3K_counter--;
-            }
-            if(I_GAIN_100K_counter > 0){
-                I_GAIN_100K_counter--;
-            }
-            if(I_GAIN_3M_counter > 0){
-                I_GAIN_3M_counter--;
-            }
-        }
-    }
-    else if(INSTRUCTION.ADCGainLevel == I_GAIN_3K){
-        // switch to 4 level current(large)
-        if(RealCurrent > I_GAIN_MID2_BOUNDARY2 || RealCurrent < -1*I_GAIN_MID2_BOUNDARY2){
-            I_GAIN_100R_counter++;
-            if(I_GAIN_100R_counter > 2){
-                INSTRUCTION.ADCGainLevel = I_GAIN_100R;
-                IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                I_GAIN_100R_counter = 0;
-                record_flag = false;
-            }
-        }
-        else if (RealCurrent < I_GAIN_MID2_BOUNDARY1 && RealCurrent > -1*I_GAIN_MID2_BOUNDARY1){
-            // switch to 1 level current(small)
-            if(RealCurrent < I_GAIN_MID1_BOUNDARY1 && RealCurrent > -1*I_GAIN_MID1_BOUNDARY1){
-                I_GAIN_3M_counter++;
-                if(I_GAIN_3M_counter > 2){
-                    INSTRUCTION.ADCGainLevel = I_GAIN_3M;
-                    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                    I_GAIN_3M_counter = 0;
-                    record_flag = false;
-                }
-            }
-            // switch to 2 level current
-            else{
-                I_GAIN_100K_counter++;
-                if(I_GAIN_100K_counter > 2){
-                    INSTRUCTION.ADCGainLevel = I_GAIN_100K;
-                    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                    I_GAIN_100K_counter = 0;
-                    record_flag = false;
-                }
-            }
-        }else{
-            if(I_GAIN_100R_counter > 0){
-                I_GAIN_100R_counter--;
-            }
-            if(I_GAIN_100K_counter > 0){
-                I_GAIN_100K_counter--;
-            }
-            if(I_GAIN_3M_counter > 0){
-                I_GAIN_3M_counter--;
-            }
-        }
-    }
-    else if(INSTRUCTION.ADCGainLevel == I_GAIN_100K){
-            // switch to 1 level current(small)
-            if(RealCurrent < I_GAIN_MID1_BOUNDARY1 && RealCurrent > -1*I_GAIN_MID1_BOUNDARY1){
-                I_GAIN_3M_counter++;
-                if(I_GAIN_3M_counter > 2){
-                    INSTRUCTION.ADCGainLevel = I_GAIN_3M;
-                    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                    I_GAIN_3M_counter = 0;
-                    record_flag = false;
-                }
-            }
-            else if (RealCurrent > I_GAIN_MID1_BOUNDARY2 || RealCurrent < -1*I_GAIN_MID1_BOUNDARY2){
-                 // switch to 4 level current(large)
-                 if(RealCurrent > I_GAIN_MID2_BOUNDARY2 || RealCurrent < -1*I_GAIN_MID2_BOUNDARY2){
-                    I_GAIN_100R_counter++;
-                    if(I_GAIN_100R_counter > 2){
-                        INSTRUCTION.ADCGainLevel = I_GAIN_100R;
-                        IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                        I_GAIN_100R_counter = 0;
-                        record_flag = false;
-                    }
-                }
-                 // switch to 3 level current
-                 else{
-                    I_GAIN_3K_counter++;
-                    if(I_GAIN_3K_counter > 2){
-                        INSTRUCTION.ADCGainLevel = I_GAIN_3K;
-                        IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                        I_GAIN_3K_counter = 0;
-                        record_flag = false;
-                    }
-                }
-            }else{
-                if(I_GAIN_100R_counter > 0){
-                    I_GAIN_100R_counter--;
-                }
-                if(I_GAIN_3K_counter > 0){
-                    I_GAIN_3K_counter--;
-                }
-                if(I_GAIN_3M_counter > 0){
-                    I_GAIN_3M_counter--;
-                }
-            }
-        }
-    else if(INSTRUCTION.ADCGainLevel == I_GAIN_3M){
-        if(RealCurrent > I_GAIN_SMALL_BOUNDARY || RealCurrent < -1*I_GAIN_SMALL_BOUNDARY){
-            // switch to 4 level current(large)
-            if(RealCurrent > I_GAIN_MID2_BOUNDARY2 || RealCurrent < -1*I_GAIN_MID2_BOUNDARY2){
-                I_GAIN_100R_counter++;
-                if(I_GAIN_100R_counter > 2){
-                    INSTRUCTION.ADCGainLevel = I_GAIN_100R;
-                    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                    I_GAIN_100R_counter = 0;
-                    record_flag = false;
-                }
-            }
-            // switch to 3 level current
-            else if(RealCurrent > I_GAIN_MID1_BOUNDARY2 || RealCurrent < -1*I_GAIN_MID1_BOUNDARY2){
-                I_GAIN_3K_counter++;
-                if(I_GAIN_3K_counter > 2){
-                    INSTRUCTION.ADCGainLevel = I_GAIN_3K;
-                    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                    I_GAIN_3K_counter = 0;
-                    record_flag = false;
-                }
-            }
-            // switch to 2 level current
-            else{
-                I_GAIN_100K_counter++;
-                if(I_GAIN_100K_counter > 2){
-                    INSTRUCTION.ADCGainLevel = I_GAIN_100K;
-                    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                    I_GAIN_100K_counter = 0;
-                    record_flag = false;
-                }
-
-            }
-        }else{
-            if(I_GAIN_100R_counter > 0){
-                I_GAIN_100R_counter--;
-            }
-            if(I_GAIN_3K_counter > 0){
-                I_GAIN_3K_counter--;
-            }
-            if(I_GAIN_100K_counter > 0){
-                I_GAIN_100K_counter--;
-            }
-        }
-    }
-}
-
-static void AutoGainChangeVin(int32_t RealVin){
-    // switch to 1 level volt(small)      1M
-    // switch to 2 level volt            30K
-    // switch to 3 level volt(large)      1K
-    if(INSTRUCTION.VinADCGainLevel == VIN_GAIN_1M){
-        if(RealVin > VIN_GAIN_SMALL_BOUNDARY || RealVin < -1*VIN_GAIN_SMALL_BOUNDARY){
-            // switch to 3 level volt(large)
-            if (RealVin > VIN_GAIN_MID1_BOUNDARY2 || RealVin < -1*VIN_GAIN_MID1_BOUNDARY2){
-                VIN_GAIN_1K_counter++;
-                if(VIN_GAIN_1K_counter > 2){
-                    INSTRUCTION.VinADCGainLevel = VIN_GAIN_1K;
-                    VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-                    VIN_GAIN_1K_counter = 0;
-                    record_flag = false;
-                }
-            }
-            // switch to 2 level volt
-            else{
-                VIN_GAIN_30K_counter++;
-                if(VIN_GAIN_30K_counter > 2){
-                    INSTRUCTION.VinADCGainLevel = VIN_GAIN_30K;
-                    VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-                    VIN_GAIN_30K_counter = 0;
-                    record_flag = false;
-                }
-            }
-        }else{
-            if(VIN_GAIN_1K_counter > 0){
-                VIN_GAIN_1K_counter--;
-            }
-            if(VIN_GAIN_30K_counter > 0){
-                VIN_GAIN_30K_counter--;
-            }
-        }
-    }
-    else if(INSTRUCTION.VinADCGainLevel == VIN_GAIN_30K){
-        // switch to 1 level volt(small)
-        if(RealVin < VIN_GAIN_MID1_BOUNDARY1 && RealVin > -1*VIN_GAIN_MID1_BOUNDARY1){
-            VIN_GAIN_1M_counter++;
-            if(VIN_GAIN_1M_counter > 2){
-                INSTRUCTION.VinADCGainLevel = VIN_GAIN_1M;
-                VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-                VIN_GAIN_1M_counter = 0;
-                record_flag = false;
-            }
-        }
-        else if (RealVin > VIN_GAIN_MID1_BOUNDARY2 || RealVin < -1*VIN_GAIN_MID1_BOUNDARY2){
-            // switch to 3 level volt
-            VIN_GAIN_1K_counter++;
-            if(VIN_GAIN_1K_counter > 2){
-                INSTRUCTION.VinADCGainLevel = VIN_GAIN_1K;
-                VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-                VIN_GAIN_1K_counter = 0;
-                record_flag = false;
-            }
-        }else{
-            if(VIN_GAIN_1K_counter > 0){
-                VIN_GAIN_1K_counter--;
-            }
-            if(VIN_GAIN_1M_counter > 0){
-                VIN_GAIN_1M_counter--;
-            }
-        }
-    }
-    else if(INSTRUCTION.VinADCGainLevel == VIN_GAIN_1K){
-        if(RealVin < VIN_GAIN_LARGE_BOUNDARY && RealVin > -1*VIN_GAIN_LARGE_BOUNDARY){
-            // switch to 1 level volt(small)
-            if (RealVin < VIN_GAIN_MID1_BOUNDARY1 && RealVin > -1*VIN_GAIN_MID1_BOUNDARY1){
-                VIN_GAIN_1M_counter++;
-                if(VIN_GAIN_1M_counter > 2){
-                    INSTRUCTION.VinADCGainLevel = VIN_GAIN_1M;
-                    VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-                    VIN_GAIN_1M_counter = 0;
-                    record_flag = false;
-                }
-            }
-            // switch to 2 level volt
-            else{
-                VIN_GAIN_30K_counter++;
-                if(VIN_GAIN_30K_counter > 2){
-                    INSTRUCTION.VinADCGainLevel = VIN_GAIN_30K;
-                    VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-                    VIN_GAIN_30K_counter = 0;
-                    record_flag = false;
-                }
-            }
-        }else{
-            if(VIN_GAIN_1M_counter > 0){
-                VIN_GAIN_1M_counter--;
-            }
-            if(VIN_GAIN_30K_counter > 0){
-                VIN_GAIN_30K_counter--;
-            }
-        }
-    }
-}
-
-static uint16_t ADC_CURRENT_AVG_calibration (uint8_t ADC_channel) {
-    uint32_t ADCValueTemp           = 0;
-    uint32_t ADCValueSUM            = 0;
-    uint32_t ADCValueAVG            = 0;
-    uint16_t ADCValueAVG_RAW        = 0;
-    #define avgcount   10000
-
-    // Red light for start acquiring data
-    Elite_led_color(COLOR_RED);
-//    CPUdelay(10);
-    for(int i=0; i<avgcount; i++){
-        CAL_ADC_write(ADC_channel);
-        CAL_ADC_read(spi_ADC_rxbuf);
-        CPUdelay(10);
-        CAL_ADC_write(ADC_channel);
-        CAL_ADC_read(spi_ADC_rxbuf);
-        CPUdelay(500);
-
-        ADCValueTemp = 0x0000FFFF & (((uint32_t) (spi_ADC_rxbuf[0]) << 8) | ((uint32_t) (spi_ADC_rxbuf[1])));
-        ADCValueSUM = ADCValueSUM + ADCValueTemp;
-    }
-
-    ADCValueAVG = ADCValueSUM / avgcount;
-    ADCValueAVG_RAW = (uint16_t) (ADCValueAVG & 0x0000FFFF);
-
-    // Blue light for data acquire done
-    Elite_led_color(COLOR_BLUE);
-
-    if (ADCValueAVG_RAW > 0x7FFF) {
-        ADCValueAVG_RAW = 0x0000;
-    }
-
-    // clean data
-    ADCValueAVG = 0;
-    ADCValueSUM = 0;
-    ADCValueTemp = 0;
-
-//    // Blue light for data acquire done
-//    Elite_led_color(COLOR_BLUE);
-
-
-
-    return ADCValueAVG_RAW;
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteCCCMode.h

@@ -1,32 +0,0 @@
-
-#ifndef ELITECCC
-#define ELITECCC
-
-#include "EliteCCMode.h"
-
-
-// XXX : should we reset DAC output after STOP?
-static void CCModeReverseCurrent(CCCMode *CCC){
-    if(CCC->StandBy){
-        if(CT.StandByCounter == CCC->StandByTime){
-            CCC->StandBy = false;
-            CT.StandByCounter = 0;
-        }
-        else{
-            CT.StandByCounter ++;
-        }
-    }
-    else{
-        // reverse charge/discharge
-        if(CCC->BatteryV == CCC->VMax){
-            CCC->StandBy = true;
-            CCC->value = CCC->DischargeCurrent;
-        }
-        else if(CCC->BatteryV == CCC->VMin){
-            CCC->StandBy = true;
-            CCC->value = CCC->ChargeCurrent;
-        }
-    }
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteCCMode.h

@@ -1,83 +0,0 @@
-
-#ifndef ELITECCMODE
-#define ELITECCMODE
-
-#define Vset INSTRUCTION.Vset
-#define DELTAVOLTMAX 100000
-
-/* Transform setting CC into IUC
-*
-* User code in CC mode : 0 ~ 3000000
-* Real current value : -15.00000 ~ 15.00000 mA
-*  => user code = 1500000 mapping to 0.00000 mA
-*/
-static void CC_Vscan(CCMode *CC){
-    static int32_t Iin = 0;
-    static int32_t deltaI = 0;
-    static int32_t deltaV = 0;
-    uint16_t divisionRate;
-
-    if(vscanReset){
-        Vset = 0;
-
-        if(CC->_charge == 0){
-            CC->_Iset *= -1;
-        }
-
-        Iin = CC->_measureCurrent * 20; //[50pA]   nA => 50pA
-        deltaI = Iin - CC->_Iset;
-
-        if(deltaI > 20000000 || deltaI < -20000000){ //1mA
-            divisionRate = 1000;
-        }else{
-            divisionRate = 10;
-        }
-
-        deltaV = -1 * (deltaI / divisionRate); //-5 * deltaI / 5000   //pV=> 5nV
-
-        if(deltaV > DELTAVOLTMAX){ //100000 = 500uV
-            deltaV = DELTAVOLTMAX;
-        }else if(deltaV < (-DELTAVOLTMAX)){
-            deltaV = (-DELTAVOLTMAX);
-        }
-
-        Vset = Vset + deltaV; //[5nV]
-
-        if(Vset <= CC->_Vmin){
-            Vset = CC->_Vmin;
-        }else if(Vset >= CC->_Vmax){
-            Vset = CC->_Vmax;
-        }
-    }
-
-    if(!vscanReset){
-        Iin = CC->_measureCurrent * 20; //[50pA]   nA => 50pA
-        deltaI = Iin - CC->_Iset;
-
-        if(deltaI > 20000000 || deltaI < -20000000){ //1mA
-            divisionRate = 1000;
-        }else{
-            divisionRate = 10;
-        }
-
-        deltaV = -1 * (deltaI / divisionRate); //-5 * deltaI / 5000   //pV=> 5nV
-
-        if(deltaV > DELTAVOLTMAX){ //100000 = 500uV
-            deltaV = DELTAVOLTMAX;
-        }else if(deltaV < (-DELTAVOLTMAX)){
-            deltaV = (-DELTAVOLTMAX);
-        }
-
-        Vset = Vset + deltaV; //[5nV]
-
-        if(Vset <= CC->_Vmin){
-            Vset = CC->_Vmin;
-        }else if(Vset >= CC->_Vmax){
-            Vset = CC->_Vmax;
-        }
-    }
-//    int32_t RealV;
-//    RealV = (int32_t)(deltaV);
-//    InputNotify(NOTIFY_IMPEDANCE, RealV);
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteCV3Mode.h

@@ -1,156 +0,0 @@
-#ifndef ELITECV3
-#define ELITECV3
-
-#define Vset INSTRUCTION.Vset
-
-static uint16_t CV3Curve(CV3Mode *CV3){
-    static uint16_t DACOutCode;
-    static int32_t Vin;
-    static int32_t Vout;
-    static int32_t DeltaVout;
-
-    Vin = CV3->_measureVin * 200;//[5nV]
-    if(DACReset){
-        Vout = Vset + Vin;
-        DACReset = false;
-    }else{
-        DeltaVout = Vset - (Vout - Vin);
-        Vout = Vout + DeltaVout;
-    }
-
-    INSTRUCTION.VoltConstant = Vout / 40000 + 25000;//5nV=>usercode
-    DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, INSTRUCTION.VoltConstant);
-
-    int32_t RealV2;
-    RealV2 = (int32_t)((Vout - Vin) / 200);//[1uV]
-    InputNotify(NOTIFY_VOLT, RealV2);
-
-    int32_t RealV;
-    RealV = (int32_t)(Vout / 200);//[1uV]
-    InputNotify(NOTIFY_IMPEDANCE, RealV);
-
-    DAC_outputV(DACOutCode);
-
-     return DACOutCode;
-}
-
-static void CV3_Vscan(CV3Mode *CV3){
-    static int16_t VminCounter;
-    static int16_t VmaxCounter;
-    static uint16_t CycleCounter;
-
-    NotifyCycleNumber = (INSTRUCTION.cycleNumber - CV3->_cycleNumber + 1);
-
-    if(vscanReset){
-        VmaxCounter = 0;
-        VminCounter = 0;
-        CycleCounter = 0;
-
-        if(INSTRUCTION.directionInit == 1){
-            CV3->_direction_up         = true;
-            CV3->_current_direction_up = true;
-        }else{
-            CV3->_direction_up         = false;
-            CV3->_current_direction_up = false;
-        }
-
-        //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if(INSTRUCTION.step <= 10){
-            CV3->_Vstep = INSTRUCTION.step *  INSTRUCTION.VsetRate / 5;
-        }else{
-            CV3->_Vstep = INSTRUCTION.step / 5 *  INSTRUCTION.VsetRate;
-        }
-
-        if(CV3->_Vmin == CV3->_Vinit){
-            VminCounter = -1;
-        }
-        if(CV3->_Vmax == CV3->_Vinit){
-            VmaxCounter = -1;
-        }
-
-        Vset = CV3->_Vinit;
-    }
-
-    if(!vscanReset){
-        if((INSTRUCTION.Vinit < INSTRUCTION.Ve1 && INSTRUCTION.Vinit < INSTRUCTION.Ve2) ||
-        (INSTRUCTION.Vinit > INSTRUCTION.Ve1 && INSTRUCTION.Vinit > INSTRUCTION.Ve2)
-        ){
-            if (CV3->_current_direction_up){
-                Vset = Vset + CV3->_Vstep;
-            }else{
-                Vset = Vset - CV3->_Vstep;
-            }
-
-            if(INSTRUCTION.Vinit < INSTRUCTION.Ve1 && INSTRUCTION.Vinit < INSTRUCTION.Ve2){
-                if(Vset == CV3->_Vmin){
-                    VminCounter = -1;
-                    INSTRUCTION.Vinit = INSTRUCTION.Vmin;
-                    CV3->_Vinit = CV3->_Vmin;
-                }
-            }else if(INSTRUCTION.Vinit > INSTRUCTION.Ve1 && INSTRUCTION.Vinit > INSTRUCTION.Ve2){
-                if(Vset == CV3->_Vmax){
-                    VmaxCounter = -1;
-                    INSTRUCTION.Vinit = INSTRUCTION.Vmax;
-                    CV3->_Vinit = CV3->_Vmax;
-                }
-            }
-        }else{
-            if (Vset >= CV3->_Vmax){
-                VmaxCounter++;
-            }else if (Vset <= CV3->_Vmin){
-                VminCounter++;
-            }
-
-            if (CV3->_current_direction_up){
-                Vset = Vset + CV3->_Vstep * GPT.GptimerMultiple;
-            }else{
-                Vset = Vset - CV3->_Vstep * GPT.GptimerMultiple;
-            }
-
-            if(VmaxCounter != 0 && VminCounter != 0){
-                if(VmaxCounter == VminCounter && CV3->_direction_up && CV3->_current_direction_up){
-                    if(CycleCounter != VmaxCounter){
-                        if(Vset >= CV3->_Vinit){
-                            CV3->_cycleNumber--;
-                            CycleCounter = VmaxCounter; //VmaxCounter = VminCounter = CycleCounter
-                        }
-                    }
-                }
-                if(VmaxCounter == VminCounter && !CV3->_direction_up && !CV3->_current_direction_up){
-                    if(CycleCounter != VmaxCounter){
-                        if(Vset <= CV3->_Vinit){
-                            CV3->_cycleNumber--;
-                            CycleCounter = VmaxCounter; //VmaxCounter = VminCounter = CycleCounter
-                        }
-                    }
-                }
-            }
-
-            if (Vset >= CV3->_Vmax){
-                CV3->_current_direction_up = false;
-            }else if (Vset <= CV3->_Vmin){
-                CV3->_current_direction_up = true;
-            }
-
-            /*stop condition*/
-            if(CV3->_cycleNumber == 0){
-    //            PeriodicEvent = false;
-                ModeLED(POST_WORK);
-                InitEliteFlag();
-                INSTRUCTION.eliteFxn   = CONSTANT_CURRENT;
-                INSTRUCTION.sampleRate = 15;
-                INSTRUCTION.charge     = 0x01;
-                INSTRUCTION.constantCurrent = 0x00;
-                INSTRUCTION.Vmax       = 0xC350;
-                INSTRUCTION.Vmin       = 0x0000;
-                INSTRUCTION.notifyRate = 500;
-                INSTRUCTION.VoViSwitch = 0x02;//read Vscan = Vout - Vin
-            }
-        }
-
-    }
-//    int32_t RealV;
-//    RealV = (int32_t)(Vset / 500);//[1uV]
-//    InputNotify(NOTIFY_VOLT, RealV);
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteCVCurve.h

@@ -1,217 +0,0 @@
-
-#ifndef ELITECV
-#define ELITECV
-
-static uint16_t SWVCurve(WorkMode *WorkModeData) {
-    static uint8_t  counter;
-    static uint16_t outputV;
-    static uint16_t Volt;
-    static bool     direction_up;
-
-    // reset origin volt at the begin
-    if (DACReset) {
-        Volt    = INSTRUCTION.Ve1;
-        outputV = INSTRUCTION.Ve1;
-        if (INSTRUCTION.Ve1 < INSTRUCTION.Ve2)
-            direction_up = true;
-        else
-            direction_up = false;
-        counter  = 1;
-        DACReset = false;
-    }
-
-    if (counter == 2 * PulseWidth)
-        counter = 1;
-    else
-        counter++;
-
-    // output a certain volt
-    outputV = Volt;
-    DAC_outputV(outputV);
-
-    // VoltValue = (ramp1*16 + ramp0/16) * 3.05;
-
-    // check if we reach the final volt
-    if ((outputV >= INSTRUCTION.Ve2 && direction_up) || (outputV <= INSTRUCTION.Ve2 && !direction_up)) {
-        PeriodicEvent = false;
-        DACReset      = true;
-    }
-
-    // prepare the next output volt
-    if (direction_up) {
-        if (counter == PulseWidth)
-            Volt = Volt + Amplitude;
-        else if (counter == 2 * PulseWidth)
-            Volt = Volt - (Amplitude - INSTRUCTION.step);
-        else
-            Volt = Volt;
-    } else {
-        if (counter == PulseWidth)
-            Volt = Volt - Amplitude;
-        else if (counter == 2 * PulseWidth)
-            Volt = Volt + (Amplitude - INSTRUCTION.step);
-        else
-            Volt = Volt;
-    }
-
-    return outputV;
-}
-
-static uint16_t DPVCurve(WorkMode *WorkModeData) {
-    static uint8_t  counter;
-    static uint16_t Volt1;
-    static uint16_t Volt2;
-    static uint16_t outputV;
-    static bool     direction_up;
-
-    // reset origin volt at the begin
-    if (DACReset) {
-        if (INSTRUCTION.Ve1 < INSTRUCTION.Ve2)
-            direction_up = true;
-        else
-            direction_up = false;
-
-        Volt1 = INSTRUCTION.Ve1;
-        if (direction_up)
-            Volt2 = INSTRUCTION.Ve1 + Amplitude;
-        else
-            Volt2 = INSTRUCTION.Ve1 - Amplitude;
-
-        counter  = 1;
-        DACReset = false;
-    }
-
-    if (counter == PulsePeriod)
-        counter = 1;
-    else
-        counter++;
-
-    // output a certain volt
-    if (counter <= (PulsePeriod - PulseWidth)) {
-        outputV = Volt1;
-        DAC_outputV(Volt1);
-    } else {
-        outputV = Volt2;
-        DAC_outputV(Volt2);
-    }
-
-
-    // VoltValue = (ramp1*16 + ramp0/16) * 3.05;
-
-    // check if we reach the final volt
-    if (((outputV >= INSTRUCTION.Ve2) && direction_up) || ((outputV <= INSTRUCTION.Ve2) && !direction_up)) {
-        PeriodicEvent = false;
-        DACReset      = true;
-    }
-
-    // check overflow/underflow and prepare for next output
-    if (direction_up) {
-        if (Volt1 + INSTRUCTION.step < Volt1)
-            Volt1 = 0xffff;
-        else
-            Volt1 = Volt1 + INSTRUCTION.step;
-        if (Volt2 + INSTRUCTION.step < Volt2)
-            Volt2 = 0xffff;
-        else
-            Volt2 = Volt2 + INSTRUCTION.step;
-    } else {
-        if (Volt1 - INSTRUCTION.step > Volt1)
-            Volt1 = 0x0000;
-        else
-            Volt1 = Volt1 - INSTRUCTION.step;
-        if (Volt2 - INSTRUCTION.step > Volt2)
-            Volt2 = 0x0000;
-        else
-            Volt2 = Volt2 - INSTRUCTION.step;
-    }
-
-    if (counter + 1 <= (PulsePeriod - PulseWidth)) {
-        return Volt1;
-    } else {
-        return Volt2;
-    }
-}
-
-static void CV_Vscan(CVMode *CV){
-    static int16_t VminCounter;
-    static int16_t VmaxCounter;
-    static uint16_t CycleCounter;
-
-    NotifyCycleNumber = (INSTRUCTION.cycleNumber - CV->_cycleNumber + 1);
-
-    if(vscanReset){
-        VmaxCounter = 0;
-        VminCounter = 0;
-        CycleCounter = 0;
-
-        if(INSTRUCTION.directionInit == 1){
-            CV->_direction_up         = true;
-            CV->_current_direction_up = true;
-        }else if(INSTRUCTION.directionInit == 0){
-            CV->_direction_up         = false;
-            CV->_current_direction_up = false;
-        }
-
-        //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if(INSTRUCTION.step <= 10){
-            CV->_Vstep = INSTRUCTION.step * INSTRUCTION.VsetRate / 5;
-        }else{
-            CV->_Vstep = INSTRUCTION.step / 5 * INSTRUCTION.VsetRate;
-        }
-
-        if(CV->_Vmin == CV->_Vinit){
-            VminCounter = -1;
-        }
-        if(CV->_Vmax == CV->_Vinit){
-            VmaxCounter = -1;
-        }
-
-        Vset = CV->_Vinit;
-    }
-
-    if(!vscanReset){
-        if (Vset >= CV->_Vmax){
-            VmaxCounter++;
-        }else if (Vset <= CV->_Vmin){
-            VminCounter++;
-        }
-
-        if (CV->_current_direction_up){
-            Vset = Vset + CV->_Vstep * GPT.GptimerMultiple;
-        }else{
-            Vset = Vset - CV->_Vstep * GPT.GptimerMultiple;
-        }
-
-        if(VmaxCounter != 0 && VminCounter != 0){
-            if(VmaxCounter == VminCounter && CV->_direction_up && CV->_current_direction_up){
-                if(CycleCounter != VmaxCounter){
-                    if(Vset >= CV->_Vinit){
-                        CV->_cycleNumber--;
-                        CycleCounter = VmaxCounter; //VmaxCounter = VminCounter = CycleCounter
-                    }
-                }
-            }
-            if(VmaxCounter == VminCounter && !CV->_direction_up && !CV->_current_direction_up){
-                if(CycleCounter != VmaxCounter){
-                    if(Vset <= CV->_Vinit){
-                        CV->_cycleNumber--;
-                        CycleCounter = VmaxCounter; //VmaxCounter = VminCounter = CycleCounter
-                    }
-                }
-            }
-        }
-
-        if (Vset >= CV->_Vmax){
-            CV->_current_direction_up = false;
-        }else if (Vset <= CV->_Vmin){
-            CV->_current_direction_up = true;
-        }
-
-        /*stop condition*/
-        if(CV->_cycleNumber == 0){
-            PeriodicEvent = false;
-            ModeLED(NO_EVENT);
-        }
-    }
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteCVSCANMode.h

@@ -1,47 +0,0 @@
-#ifndef ELITECVSCAN
-#define ELITECVSCAN
-
-#define Vset INSTRUCTION.Vset
-
-static uint16_t CVSCANCurve(CVSCANMode *CVSCAN){
-    static uint16_t DACOutCode;
-    static int32_t Vin;
-    static int32_t Vout;
-    static int32_t DeltaVout;
-
-    Vin = CVSCAN->_measureVin * 200;//[5nV]
-    if(DACReset){
-        Vout = Vset + Vin;
-        DACReset = false;
-    }else{
-        DeltaVout = Vset - (Vout - Vin);
-        Vout = Vout + DeltaVout;
-    }
-
-    INSTRUCTION.VoltConstant = Vout / 40000 + 25000;//5nV=>usercode
-    DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, INSTRUCTION.VoltConstant);
-
-    int32_t RealV2;
-    RealV2 = (int32_t)((Vout - Vin) / 200);//[1uV]
-    InputNotify(NOTIFY_VOLT, RealV2);
-
-    int32_t RealV;
-    RealV = (int32_t)(Vout / 200);//[1uV]
-    InputNotify(NOTIFY_IMPEDANCE, RealV);
-
-    DAC_outputV(DACOutCode);
-
-    return DACOutCode;
-}
-
-static void CVSCAN_Vscan(CVSCANMode *CVSCAN){
-
-    if(vscanReset){
-        Vset = CVSCAN->_Vinit;
-    }
-
-    if(!vscanReset){
-        Vset = CVSCAN->_Vinit;
-    }
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteDAC.h

@@ -1,121 +0,0 @@
-
-#ifndef EliteDAC
-#define EliteDAC
-
-static bool DACReset;
-
-
-//#ifdef ELITE_VERSION_1_3
-//#define DACOUT 0x30
-//
-//static void DAC_outputV(uint16_t voltLV) {
-//    // C = command, X = don't care, D = data
-//    // CCCC XXXX = command
-//    // DDDD DDDD = v1
-//    // DDDD XXXX = v2
-//
-//    uint8_t v1, v2 = 0;
-//    v1 = (uint8_t) (voltLV >> 4) & 0xFF;
-//    v2 = (uint8_t) ((voltLV & 0x000F) << 4) & 0xF0;
-//
-//    spi_DACtxbuf[0] = command;
-//    spi_DACtxbuf[1] = v1;
-//    spi_DACtxbuf[2] = v2;
-//    for (int i = 3; i < SPI_DAC_SIZE; i++) {
-//        spi_DACtxbuf[i] = 0;
-//    }
-//
-//    DAC_SPI(SPI_DAC_SIZE, spi_DACtxbuf, spi_rxbuf);
-//}
-//#endif
-
-#ifdef ELITE_VERSION_1_4
-#define DACCLS 0x02
-#define DACOUT 0x31
-
-static uint16_t DAC_outputV(uint16_t voltLV) {
-    // C = command, X = don't care, D = data
-    // CCCC CCCC = command
-    // DDDD DDDD = v1
-    // DDDD DDDD = v2
-
-    // command
-    // 0x02 = clear
-    // 0x31 = output voltage
-
-    uint8_t v1, v2 = 0;
-    v1 = (uint8_t) ((voltLV & 0xFF00) >> 8);
-    v2 = (uint8_t) (voltLV & 0x00FF);
-
-    spi_DACtxbuf[0] = DACOUT;
-    spi_DACtxbuf[1] = v1;
-    spi_DACtxbuf[2] = v2;
-
-    DAC_SPI(SPI_DAC_SIZE, spi_DACtxbuf, spi_rxbuf);
-
-    return voltLV;
-}
-
-static void VoutGainControl(uint8_t VOUTLevel){
-    if(VOUTLevel == 0){
-        // VOUT gain level = 0, using 240K resister
-        PIN15_setOutputValue(Turon_VOUT_SMALL, 0);
-    }
-    else if(VOUTLevel == 1){
-        // VOUT gain level = 1, using 15K resister
-        PIN15_setOutputValue(Turon_VOUT_SMALL, 1);
-    }
-    else if(VOUTLevel == 2){
-        // VOUT gain level = 2, using 15K resister
-        PIN15_setOutputValue(Turon_VOUT_SMALL, 1);
-    }
-    else{
-        // default using 15K resister
-        PIN15_setOutputValue(Turon_VOUT_SMALL, 1);
-    }
-}
-
-#endif
-
-static int32_t User2Real(uint16_t UserCode){
-    /* transfer usercode to real voltage value (mV) */
-    return (int32_t)((UserCode - 25000) / 5);
-}
-
-
-// DAC Vout theoretical boundary <300, 100~ (mV)
-#define DAC_VOUT_GAIN_SMALL_BOUNDARY           100000  // 25500(usercode) = 100 mV
-#define DAC_VOUT_GAIN_LARGE_BOUNDARY           300000  // 26500(usercode) = 300 mV
-#define DAC_VOUT_GAIN_LARGE_BOUNDARY_USERCODE   26500  // 26500(usercode) = 300 mV
-#define DAC_VOUT_GAIN_LARGE_BOUNDARY1_USERCODE  23500  // 23500(usercode) = -300 mV
-
-static void AutoGainChangeVout(int32_t userCode){
-    int32_t RealVolt = (userCode - 25000) * 200; // (userCode - 25000) / 5 * 1000  [1uV]
-    // switch to 1 level volt(small)   15K
-    // switch to 2 level volt(large)   240K
-
-    if(INSTRUCTION.VoutGainLevel == VOUT_GAIN_AUTO){
-        INSTRUCTION.VoutGainLevel = VOUT_GAIN_15K;
-        VoutGainControl(INSTRUCTION.VoutGainLevel);
-        record_flag = false;
-    }
-
-    if(INSTRUCTION.VoutGainLevel == VOUT_GAIN_15K){
-        if(RealVolt > DAC_VOUT_GAIN_LARGE_BOUNDARY || RealVolt < -1 * DAC_VOUT_GAIN_LARGE_BOUNDARY){
-            // switch to 2 level volt(large)
-            INSTRUCTION.VoutGainLevel = VOUT_GAIN_240K;
-            VoutGainControl(INSTRUCTION.VoutGainLevel);
-            record_flag = false;
-        }
-    }
-    else if(INSTRUCTION.VoutGainLevel == VOUT_GAIN_240K){
-        if(RealVolt < DAC_VOUT_GAIN_SMALL_BOUNDARY && RealVolt > -1 * DAC_VOUT_GAIN_SMALL_BOUNDARY ){
-            // switch to 1 level volt(small)
-            INSTRUCTION.VoutGainLevel = VOUT_GAIN_15K;
-            VoutGainControl(INSTRUCTION.VoutGainLevel);
-            record_flag = false;
-        }
-    }
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteDeviceCorrection.h

@@ -1,365 +0,0 @@
-#ifndef EliteCorrection
-#define EliteCorrection
-
-#include "EliteDAC.h"
-#include "EliteADC.h"
-
-
-
-/*
-*   Correction Array include all the correction coeff and offset
-*
-*   Correction formula format is " RealValue = coeff * code + offset "
-*   RealValue can be RealCurrent, RealVolt, or RealResister ...
-*   code is the code we read from ADC buffer
-*
-*   ADC measure Voltage
-*   RealVolt = Correction.ADC_volt.coeff * code + Correction.ADC_volt.offset
-*
-*   ADC measure Current
-*   ADCGain:  0 => 200k, 1 => 10k, 2 => 200R
-*   RealCurrent = Correction.ADC_current[ADCGain].coeff * code + Correction.ADC_current[ADCGain].offset
-*
-*   DAC output Voltage
-*   RealVolt = Correction.DAC2RealV.coeff * DACcode + Correction.DAC2RealV.offset
-*
-*   Usercode to DACcode
-*   DACcode = Correction.Usercode2DAC.coeff * code + Correction.Usercode2DAC.offset
-*
-*/
-
-
-#define BOARD_C771
-
-typedef struct _formula{
-
-    long long coeff;
-    long long offset;
-
-}Formula;
-
-struct _correction{
-
-    Formula ADC_volt[3];
-    Formula ADC_current[4];
-    Formula Usercode2DAC[2];
-    Formula ADC_Vout_volt[1];
-    uint16_t Gain0Boundary[2];
-    uint16_t Gain1Boundary[4];
-    uint16_t Gain2Boundary[2];
-
-} Correction =
-
-#ifdef BOARD_C6E1 // not well
-{
-.ADC_volt[0].coeff = (-6251051),
-.ADC_volt[0].offset = 102081366120,
-
-.ADC_volt[1].coeff = (-6251051),
-.ADC_volt[1].offset = 102081366120,
-
-.ADC_volt[2].coeff = (-6251051),
-.ADC_volt[2].offset = 102081366120,
-
-.ADC_current[0].coeff = 2079230,
-.ADC_current[0].offset = (-34256067906),
-
-.ADC_current[1].coeff = 64550018,
-.ADC_current[1].offset = (-1063052554820),
-
-.ADC_current[2].coeff = 2096336928,
-.ADC_current[2].offset = (-34514344284104),
-
-.ADC_current[3].coeff = 60200953965,
-.ADC_current[3].offset = (-991270580672004),
-
-.Usercode2DAC[0].coeff = (-10511469),
-.Usercode2DAC[0].offset = 563770560100,
-
-.Usercode2DAC[1].coeff = (-10511469),
-.Usercode2DAC[1].offset = 563770560100,
-
-.ADC_Vout_volt[0].coeff = (-6251051),
-.ADC_Vout_volt[0].offset = 102081366120,
-};
-#endif
-
-#ifdef BOARD_C7A1
-{
-.ADC_volt[0].coeff = (6256),
-.ADC_volt[0].offset = -101532028,
-
-.ADC_volt[1].coeff = (215138),
-.ADC_volt[1].offset = -3501890770,
-
-.ADC_volt[2].coeff = (6245014),
-.ADC_volt[2].offset = -101751226981,
-
-.ADC_current[0].coeff = 3125920,
-.ADC_current[0].offset = (-50880328288),
-
-.ADC_current[1].coeff = 71636129,
-.ADC_current[1].offset = (-1166093783868),
-
-.ADC_current[2].coeff = 1459555637,
-.ADC_current[2].offset = (-23757721396024),
-
-.ADC_current[3].coeff = 30723232882,
-.ADC_current[3].offset = (-500144809348170),
-
-.Usercode2DAC[0].coeff = (-10543817),
-.Usercode2DAC[0].offset = 583163641972,
-
-.Usercode2DAC[1].coeff = (-178077711),
-.Usercode2DAC[1].offset = 4777894559527,
-
-.ADC_Vout_volt[0].coeff = (-6245014),
-.ADC_Vout_volt[0].offset = 101751226981,
-};
-#endif
-
-#ifdef BOARD_C6D4 // not well
-{
-.ADC_volt[0].coeff = (6226),
-.ADC_volt[0].offset = -100075170,
-
-.ADC_volt[1].coeff = (215972),
-.ADC_volt[1].offset = -3484380085,
-
-.ADC_volt[2].coeff = (6223818),
-.ADC_volt[2].offset = -100571214617,
-
-.ADC_current[0].coeff = 3136256,
-.ADC_current[0].offset = (-50747854551),
-
-.ADC_current[1].coeff = 72219340,
-.ADC_current[1].offset = (-1168719058378),
-
-.ADC_current[2].coeff = 1450319129,
-.ADC_current[2].offset = (-23465744053517),
-
-.ADC_current[3].coeff = 30710734735,
-.ADC_current[3].offset = (-496978137538345),
-
-.Usercode2DAC[0].coeff = (-10543212),
-.Usercode2DAC[0].offset = 582976692942,
-
-.Usercode2DAC[1].coeff = (-178746005),
-.Usercode2DAC[1].offset = 4789272862069,
-
-.ADC_Vout_volt[0].coeff = (-6223818),
-.ADC_Vout_volt[0].offset = 100571214617,
-};
-#endif
-
-#ifdef BOARD_C771
-{
-.ADC_volt[0].coeff = (6301),
-.ADC_volt[0].offset = -102184705,
-
-.ADC_volt[1].coeff = (216877),
-.ADC_volt[1].offset = -3519583281,
-
-.ADC_volt[2].coeff = (6298448),
-.ADC_volt[2].offset = -102304286091,
-
-.ADC_current[0].coeff = 3115431,
-.ADC_current[0].offset = (-50586460394),
-
-.ADC_current[1].coeff = 71203612,
-.ADC_current[1].offset = (-1156022105141),
-
-.ADC_current[2].coeff = 1451318434,
-.ADC_current[2].offset = (-23560731221983),
-
-.ADC_current[3].coeff = 30518004246,
-.ADC_current[3].offset = (-495456618814855),
-
-.Usercode2DAC[0].coeff = (-10563123),
-.Usercode2DAC[0].offset = 584273387784,
-
-.Usercode2DAC[1].coeff = (-178953278),
-.Usercode2DAC[1].offset = 4795625159379,
-
-.ADC_Vout_volt[0].coeff = (-6254234),
-.ADC_Vout_volt[0].offset = 101718986999,
-};
-#endif
-
-#ifdef BOARD_C604
-{
-.ADC_volt[0].coeff = (6194),
-.ADC_volt[0].offset = -100974071,
-
-.ADC_volt[1].coeff = (215506),
-.ADC_volt[1].offset = -3517864544,
-
-.ADC_volt[2].coeff = (6243728),
-.ADC_volt[2].offset = -102012564806,
-
-.ADC_current[0].coeff = 3139436,
-.ADC_current[0].offset = (-51217085818),
-
-.ADC_current[1].coeff = 71622830,
-.ADC_current[1].offset = (-1168462302473),
-
-.ADC_current[2].coeff = 1462344785,
-.ADC_current[2].offset = (-23855062972762),
-
-.ADC_current[3].coeff = 30689232716,
-.ADC_current[3].offset = (-500670762245868),
-
-.Usercode2DAC[0].coeff = (-10507403),
-.Usercode2DAC[0].offset = 582940058695,
-
-.Usercode2DAC[1].coeff = (-178479878),
-.Usercode2DAC[1].offset = 4782895510276,
-
-.ADC_Vout_volt[0].coeff = (6194),
-.ADC_Vout_volt[0].offset = -100974071,
-};
-#endif
-
-// this function turn ADC measure value (0xXXXX) into real voltage
-// unit should be uV
-static int32_t DecodeADCVolt(uint8_t ADCGain, uint16_t ADC_measure){
-    long long ADCRealVolt = 0;
-
-    ADCRealVolt = (Correction.ADC_volt[ADCGain].coeff * ADC_measure + Correction.ADC_volt[ADCGain].offset)/1e4;
-
-    return (int32_t) (ADCRealVolt);
-}
-
-// this function turn ADC measure value (0xXXXX) into Vout voltage
-// unit should be mV
-static int32_t DecodeADCVoutVolt(uint16_t ADC_measure){
-    long long ADCVoutVolt = 0;
-
-    ADCVoutVolt = (Correction.ADC_Vout_volt[0].coeff * ADC_measure + Correction.ADC_Vout_volt[0].offset);
-    ADCVoutVolt = ADCVoutVolt / 1e4;
-    return (int32_t) (ADCVoutVolt);
-}
-
-// this function turn ADC measure value (0xXXXX) into Battery voltage
-// unit should be mV
-static int32_t DecodeADCBatVolt(uint16_t ADC_measure){
-    long long ADCBatVolt = 0;
-
-    ADCBatVolt = (47362594 * ADC_measure + 290422184577);
-    ADCBatVolt = ADCBatVolt / 1e8;
-    return (int32_t) (ADCBatVolt);
-}
-
-// this function turn ADC measure value (0xXXXX) into real current
-// unit should be nA
-static int32_t DecodeADCCurrent(uint8_t ADCGain, uint16_t ADC_measure){
-    long long ADCRealCurrent = 0;
-
-    ADCRealCurrent = (Correction.ADC_current[ADCGain].coeff * ADC_measure + Correction.ADC_current[ADCGain].offset)/1e7;
-
-    // Current unit is pA;
-    // If ADCGain is I_GAIN_100R unit is nA
-    return (int32_t) (ADCRealCurrent);
-}
-
-// Decode ADC measure value (could be a volt or current) and put it into notify buffer
-static int32_t DecodeADCValue(uint8_t ADCGain, uint8_t ADCChannel, uint8_t *ADC_raw){
-
-    uint16_t ADC_measure = (uint16_t) (ADC_raw[0] << 8) | (uint16_t) (ADC_raw[1]);
-    int32_t ADCRealVolt = 0, ret = 0, ADCRealCurrent = 0, ADCVoutVolt = 0, ADCBatVolt = 0;
-
-//    InputNotify(NOTIFY_VOLT, (uint32_t)(ADC_measure));//
-    // return real volt to controller
-    if(ADCChannel == ADC_CH_VOLT){
-        ADCRealVolt = DecodeADCVolt(ADCGain, ADC_measure);
-        ret = ADCRealVolt;
-    }
-
-    // return real current to controller
-    else if(ADCChannel == ADC_CH_CURRENT){
-        ADCRealCurrent = DecodeADCCurrent(ADCGain, ADC_measure);
-        ret = ADCRealCurrent;
-    }
-
-    // return real VoutVolt to controller
-    else if(ADCChannel == ADC_CH_DAC){
-        ADCVoutVolt = DecodeADCVoutVolt(ADC_measure);
-        ret = ADCVoutVolt;
-    }
-
-    // return real Battery Volt to controller
-    else if(ADCChannel == ADC_CH_BAT){
-        ADCBatVolt = DecodeADCBatVolt(ADC_measure);
-        ret = ADCBatVolt;
-    }
-
-    else{
-        // not support AIN2 / AIN3 yet
-    }
-    return ret;
-}
-
-// #0 board, (0x5f75 <= rawdata) && (rawdata <= 0x5fb2)
-//           ((0x5f97 < rawdata) && (rawdata < 0x6589)) || ((0x5999 < rawdata) && (rawdata < 0x5f93))
-
-static void ADC_overflow(uint8_t gain, uint8_t *rawdata){
-
-    // Gain boundary defines different ADC gain level working area
-    // Gain0Boundary = {lowerbound, upperbound}, is the lower and upper bound of gain level 0 working area.
-
-    uint16_t U16Rawdata = 0;
-    U16Rawdata = (((uint16_t) (rawdata[0]))<<8) | ((uint16_t) (rawdata[1]));
-
-    if(gain == I_GAIN_3M){
-        if( U16Rawdata <= Correction.Gain0Boundary[0]){
-            rawdata[0] = Correction.Gain0Boundary[0] >> 4;
-            rawdata[1] = (uint8_t) (Correction.Gain0Boundary[0] & 0x00FF);
-        }
-        else if(U16Rawdata >= Correction.Gain0Boundary[1]){
-            rawdata[0] = (uint8_t) (Correction.Gain0Boundary[1] >> 4);
-            rawdata[1] = (uint8_t) (Correction.Gain0Boundary[1] & 0x00FF);
-        }
-    }
-    else if(gain == I_GAIN_100K){
-        if( U16Rawdata <= Correction.Gain1Boundary[0]){
-            rawdata[0] = Correction.Gain1Boundary[0] >> 4;
-            rawdata[1] = (uint8_t) (Correction.Gain1Boundary[0] & 0x00FF);
-        }
-        else if(U16Rawdata >= Correction.Gain1Boundary[1]){
-            rawdata[0] = (uint8_t) (Correction.Gain1Boundary[1] >> 4);
-            rawdata[1] = (uint8_t) (Correction.Gain1Boundary[1] & 0x00FF);
-        }
-    }
-}
-
-// User will enter -5V~+5V in UI.
-// websever and controler use 0~50000 represent -5~+5V
-// this function should turn 0~50000 into DACcode which output the exactly voltage user want
-static uint16_t Usercode_Correction_to_DAC(uint8_t DACGain, uint16_t usercode)
-{
-    long long usercode_32;
-    uint16_t DACcode = 0;
-
-    usercode_32 = (long long)(usercode);
-
-    DACcode = (uint16_t) ((Correction.Usercode2DAC[DACGain].coeff * usercode_32 + Correction.Usercode2DAC[DACGain].offset)/1e7);
-
-    return DACcode;
-}
-
-
-static int32_t DAC_to_realV(uint8_t DACGain, uint16_t DACcode)
-{
-    int32_t RealV = 0;
-    long long usercode_32;
-
-    usercode_32 = ((DACcode * 1e7) - Correction.Usercode2DAC[DACGain].offset) / Correction.Usercode2DAC[DACGain].coeff;
-
-    RealV = (int32_t) ((usercode_32 / 5) - 5000) * 1000;
-//    RealV = (int32_t) usercode_32;
-    // return nV
-    return RealV;
-}
-
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteFlagCTInit.h

@@ -1,47 +0,0 @@
-
-#ifndef ELITE_FLAG_CT_INIT
-#define ELITE_FLAG_CT_INIT
-
-// CT counter
-struct _CT{
-    uint32_t SampleRate_counter;
-    uint16_t StepTimeCounter;
-    uint16_t NotifyCounter;
-    uint32_t StandByCounter;
-}CT = {0};
-
-// GPT counter
-struct _GPT{
-    uint32_t GptimerCounter;
-    uint32_t GptimerCounter0;
-    uint8_t  DeltaGptimerCounter;
-    uint32_t SampleRateCounter;
-    uint32_t NotifyCounter;
-    uint32_t VscanRateCounter;
-    uint32_t LeadTimeCounter;
-    uint32_t BatteryADCCounter;
-    uint32_t BatteryCheckCounter;
-    uint32_t GptimerMultiple;
-    uint32_t StiCounter;
-}GPT = {0};
-
-static void InitCT(){
-    CT.SampleRate_counter = 1;
-    CT.StepTimeCounter = 1;
-    CT.NotifyCounter = 1;
-    CT.StandByCounter = 0;
-}
-
-static void InitGPT(){
-    GPT.GptimerCounter      = 0;
-    GPT.GptimerCounter0     = 0;
-    GPT.DeltaGptimerCounter = 0;
-    GPT.SampleRateCounter   = 0;
-    GPT.NotifyCounter       = 0;
-    GPT.VscanRateCounter    = 0;
-    GPT.LeadTimeCounter     = 0;
-    GPT.BatteryADCCounter   = 0;
-    GPT.BatteryCheckCounter = 0;
-    GPT.StiCounter          = 0;
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteGPTimer.h

@@ -1,38 +0,0 @@
-/* Copyright (c) 2019. BioPro. Scientific.
- */
-#ifndef HEADSTAGE_GPTIMER_H
-#define HEADSTAGE_GPTIMER_H
-
-#include <Board.h>
-#include <ti/drivers/timer/GPTimerCC26XX.h>
-#include <ti/sysbios/BIOS.h>
-#include <xdc/runtime/Types.h>
-
-#define EVT_PERIODIC_GPTIMER EVT_PERIODIC_0
-
-static GPTimerCC26XX_Handle gptimer_handle;
-
-static void elite_gptimer_callback(GPTimerCC26XX_Handle handle, GPTimerCC26XX_IntMask interruptMask);
-
-#define elite_gptimer_start() GPTimerCC26XX_start(gptimer_handle)
-#define elite_gptimer_stop() GPTimerCC26XX_stop(gptimer_handle)
-#define elite_gptimer_close() GPTimerCC26XX_close(gptimer_handle)
-#define CLOCK_FREQ 4800  // clock freq = 0.1 ms CLK frequency 4769
-
-#define elite_gptimer_open()                                                                          \
-    do {                                                                                              \
-        GPTimerCC26XX_Params params;                                                                  \
-        GPTimerCC26XX_Params_init(&params);                                                           \
-        params.width          = GPT_CONFIG_16BIT;                                                     \
-        params.mode           = GPT_MODE_PERIODIC_UP;                                               \
-        params.debugStallMode = GPTimerCC26XX_DEBUG_STALL_OFF;                                        \
-        gptimer_handle        = GPTimerCC26XX_open(Board_GPTIMER0A, &params);                         \
-        Types_FreqHz  freq;                                                                           \
-        BIOS_getCpuFreq(&freq);                                                                       \
-        GPTimerCC26XX_Value loadVal = freq.lo / 1000 - 1; /*47999*/                                   \
-        GPTimerCC26XX_setLoadValue(gptimer_handle, loadVal);                                          \
-        GPTimerCC26XX_setLoadValue(gptimer_handle, CLOCK_FREQ); /* 0.1 ms*/                           \
-        GPTimerCC26XX_registerInterrupt(gptimer_handle, elite_gptimer_callback, GPT_INT_TIMEOUT);     \
-    } while (0)
-
-#endif  // HEADSTAGE_GPTIMER_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteI2C.h

@@ -1,95 +0,0 @@
-
-#ifndef ELITE_I2C
-#define ELITE_I2C
-
-/*
-* Read I2C example in
-* http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/tirtos/2_14_02_22/
-*        exports/tirtos_full_2_14_02_22/docs/doxygen/html/_i2_c_c_c26_x_x_8h.html
-*
-*/
-
-#include <ti/drivers/I2C.h>
-#include <ti/drivers/Power.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <stddef.h>
-
-// I2C
-static I2C_Handle I2Chandle;
-static I2C_Params I2Cparams;
-static I2C_Transaction i2cTrans;
-
-#define I2CBufSize 4
-static uint8_t I2CtxBuf[I2CBufSize];      // Transmit buffer
-static uint8_t I2CrxBuf[I2CBufSize];      // Receive buffer
-bool transferDone = false;
-
-static void I2CCallbackFunction(I2C_Handle handle, I2C_Transaction *msg, bool transfer) {
-    if(transfer){
-        transferDone = true;
-    }
-}
-
-static void I2Cinit(){
-    I2C_init();
-
-    // Configure I2C parameters.
-    I2C_Params_init(&I2Cparams);
-
-    I2Cparams.transferMode  = I2C_MODE_CALLBACK;
-    I2Cparams.transferCallbackFxn = I2CCallbackFunction;
-    I2Cparams.bitRate  = I2C_100kHz;
-
-    // Initialize master I2C transaction structure
-    i2cTrans.writeCount   = I2CBufSize;
-    i2cTrans.writeBuf     = I2CtxBuf;
-    i2cTrans.readCount    = I2CBufSize;
-    i2cTrans.readBuf      = I2CrxBuf;
-    i2cTrans.slaveAddress = 0xA0;
-
-    for(int i=0 ; i<10 ; i++){
-        I2CtxBuf[i] = 0;
-        I2CrxBuf[i] = 0;
-    }
-
-    // Open I2C
-    I2Chandle = I2C_open(Board_I2C, &I2Cparams);
-
-}
-#define WriteMem 0b10100001
-#define ReadMem  0b10100000
-
-static void I2CWrite(uint8_t addr, uint8_t data){
-    for(int i=0 ; i<I2CBufSize ; i++){
-        I2CtxBuf[i] = 0;
-        I2CrxBuf[i] = 0;
-    }
-
-    I2CtxBuf[0] = WriteMem;
-    I2CtxBuf[1] = addr;
-    I2CtxBuf[2] = data;
-
-//    I2Chandle = I2C_open(Board_I2C, &I2Cparams);
-    I2C_transfer(I2Chandle, &i2cTrans);
-//    I2C_close(I2Chandle);
-}
-
-
-static void I2CRead(uint8_t addr){
-    for(int i=0 ; i<I2CBufSize ; i++){
-        I2CtxBuf[i] = 0;
-        I2CrxBuf[i] = 0;
-    }
-
-    I2CtxBuf[0] = ReadMem;
-    I2CtxBuf[1] = addr;
-
-//    I2Chandle = I2C_open(Board_I2C, &I2Cparams);
-    I2C_transfer(I2Chandle, &i2cTrans);
-//    I2C_close(I2Chandle);
-}
-
-
-#endif  // ELITE_I2C
-

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteIVCurve.h

@@ -1,48 +0,0 @@
-
-#ifndef ELITEIV
-#define ELITEIV
-
-#define Vset INSTRUCTION.Vset
-
-static void IV_Vscan(IVMode *IV){
-    if(vscanReset){
-        if(INSTRUCTION.directionInit == 1){
-            IV->_direction_up         = true;
-            IV->_current_direction_up = true;
-        }else if(INSTRUCTION.directionInit == 0){
-            IV->_direction_up         = false;
-            IV->_current_direction_up = false;
-        }
-
-        //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if(INSTRUCTION.step <= 10){
-            IV->_Vstep = INSTRUCTION.step * INSTRUCTION.VsetRate / 5;
-        }else{
-            IV->_Vstep = INSTRUCTION.step / 5 * INSTRUCTION.VsetRate;
-        }
-
-        Vset       = IV->_Vinit;
-    }
-
-    if(!vscanReset){
-        if(IV->_current_direction_up){
-            if(Vset >= IV->_Vmax){
-                PeriodicEvent = false;
-                ModeLED(NO_EVENT);
-            }
-        }else{
-            if(Vset <= IV->_Vmin){
-                PeriodicEvent = false;
-                ModeLED(NO_EVENT);
-            }
-        }
-
-        if (IV->_current_direction_up){
-            Vset = Vset + IV->_Vstep * GPT.GptimerMultiple;
-        }else{
-            Vset = Vset - IV->_Vstep * GPT.GptimerMultiple;
-        }
-    }
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteInstruction.h

@@ -1,159 +0,0 @@
-
-#ifndef ELITEINSTRUCTION
-#define ELITEINSTRUCTION
-
-/** Iin, Vin, Vout **/
-#define IIN_ADC         0x00
-#define VIN_ADC         0x01
-#define VOUT_DAC        0x02
-#define HIGH_Z          0x03
-
-/** ADC Iin gain level **/
-#define I_GAIN_3M       0x00    // largest gain
-#define I_GAIN_100K     0x01
-#define I_GAIN_3K       0x02
-#define I_GAIN_100R     0x03    // the least gain
-#define I_GAIN_AUTO     0x04
-
-/** ADC Vin gain level **/
-#define VIN_GAIN_1M     0x00
-#define VIN_GAIN_30K    0x01
-#define VIN_GAIN_1K     0x02
-#define VIN_GAIN_AUTO   0x03
-
-/** Vout gain level **/
-#define VOUT_GAIN_240K  0x00
-#define VOUT_GAIN_15K   0x01
-#define VOUT_GAIN_AUTO  0x02
-
-/* DAC reset parameter */
-#define DAC_ZERO    25000
-
-// Step time macro
-#define STEPTIME_HALF_SEC 5000
-#define STEPTIME_ONE_SEC 10000
-#define STEPTIME_TWO_SEC 20000
-
-/*==============================
- ==== headstage instruction ====
- =============================*/
-struct HEADSTAGE_INSTRUCTION {
-
-    uint8_t  chip_id;
-    uint8_t  eliteFxn;
-
-    /** DAC parameter **/
-    uint8_t  VsetRateIndex;
-    uint32_t VsetRate;
-    int32_t  Vset;
-    uint16_t VoltConstant;
-    uint8_t  directionInit;
-    uint32_t step;
-    uint16_t Ve1;
-    uint16_t Ve2;
-    int32_t  Vinit;
-    int32_t  Vmax;
-    int32_t  Vmin;
-
-    /** ADC parameter **/
-    uint8_t  sampleRateIndex;
-    uint32_t sampleRate;
-    uint8_t  VoViSwitch;
-    uint8_t  AutoGainEnable;
-    uint8_t  VinAutoGainEnable;
-    uint8_t  VoutAutoGainEnable;
-    uint8_t  ADCGainLevel;
-     // voltage output gain
-    uint16_t VoutGainLevel;
-    uint8_t  VinADCGainLevel;
-
-    /** Notify parameter **/
-    uint32_t notifyRate;
-
-    /** mode parameter **/
-    uint16_t cycleNumber;
-    uint8_t  charge;
-    int32_t  constantCurrent;
-    int32_t  Currentmax;
-    int32_t  sti_v1;
-    int32_t  sti_v2;
-    int32_t  sti_v3;
-    int32_t  sti_v4;
-    int32_t  sti_v5;
-    int32_t  sti_v6;
-    int32_t  sti_v7;
-    int32_t  sti_t1;
-    int32_t  sti_t2;
-    int32_t  sti_t3;
-    int32_t  sti_t4;
-    int32_t  sti_t5;
-    int32_t  sti_t6;
-    int32_t  sti_t7;
-    uint16_t sti_cy;
-    uint16_t sti_loop;
-
-    uint16_t StepTime;
-
-    uint8_t AdcChannel;
-
-} INSTRUCTION = {0};
-
-/*********************************************************************
- * @fn      InitEliteInstruction
- *
- * @brief   Init all INSTRUCTION variable.
- *
- * @param   None.
- *
- * @return  None.
- */
-static void InitEliteInstruction(){
-    INSTRUCTION.chip_id         = 0;
-    INSTRUCTION.eliteFxn        = 0;         //default is a null event
-    INSTRUCTION.VsetRateIndex   = 0;
-    INSTRUCTION.VsetRate        = 2;
-    INSTRUCTION.Vset            = 0;
-    INSTRUCTION.VoltConstant    = DAC_ZERO; //DAC_ZERO is about 0V
-    INSTRUCTION.directionInit   = 1;        //0:reverse        1:forward
-    INSTRUCTION.step            = 0;
-    INSTRUCTION.Ve1             = DAC_ZERO;
-    INSTRUCTION.Ve2             = DAC_ZERO;
-    INSTRUCTION.Vinit           = 0;
-    INSTRUCTION.Vmax            = 0;
-    INSTRUCTION.Vmin            = 0;
-    INSTRUCTION.sampleRateIndex = 1;
-    INSTRUCTION.sampleRate      = 100;
-    INSTRUCTION.VoViSwitch      = 0x01;    //0:user see Vo     1: user see Vi
-    INSTRUCTION.AutoGainEnable  = 1;
-    INSTRUCTION.VinAutoGainEnable = 1;
-    INSTRUCTION.VoutAutoGainEnable = 1;
-    INSTRUCTION.ADCGainLevel    = I_GAIN_AUTO;
-    INSTRUCTION.VoutGainLevel   = VOUT_GAIN_AUTO;
-    INSTRUCTION.VinADCGainLevel = VIN_GAIN_AUTO;
-    INSTRUCTION.notifyRate      = STEPTIME_ONE_SEC;
-    INSTRUCTION.cycleNumber     = 1;
-    INSTRUCTION.charge          = 1;      //0:discharge        1:charge
-    INSTRUCTION.constantCurrent = 0;
-    INSTRUCTION.Currentmax      = 0;
-    INSTRUCTION.StepTime        = STEPTIME_ONE_SEC;
-    INSTRUCTION.AdcChannel      = 0;
-
-    //pulse mode
-    INSTRUCTION.sti_t1          = 0;
-    INSTRUCTION.sti_t2          = 0;
-    INSTRUCTION.sti_t3          = 0;
-    INSTRUCTION.sti_t4          = 0;
-    INSTRUCTION.sti_t5          = 0;
-    INSTRUCTION.sti_t6          = 0;
-    INSTRUCTION.sti_t7          = 0;
-    INSTRUCTION.sti_v1          = DAC_ZERO;
-    INSTRUCTION.sti_v2          = DAC_ZERO;
-    INSTRUCTION.sti_v3          = DAC_ZERO;
-    INSTRUCTION.sti_v4          = DAC_ZERO;
-    INSTRUCTION.sti_v5          = DAC_ZERO;
-    INSTRUCTION.sti_v6          = DAC_ZERO;
-    INSTRUCTION.sti_v7          = DAC_ZERO;
-    INSTRUCTION.sti_loop        = 1;
-    INSTRUCTION.sti_cy          = 0;
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteKeyDetect.h

@@ -1,75 +0,0 @@
-
-#ifndef ELITEKEYDETECT
-#define ELITEKEYDETECT
-
-static bool TurnOnElite(uint8_t key) {
-    static uint16_t TurnOnCounter = 0;
-
-    if (key == 0) {
-        // press 1 sec, power on LED, read bat power
-        if (TurnOnCounter >= CLOCK_ONE_SECOND) {
-            headstage_battery_volt();
-            uint16_t bat = ((uint16_t)(NotifyVoltBat[2]) << 8 & 0xFF00 ) |
-                           ((uint16_t)(NotifyVoltBat[3]) & 0x00FF);
-            if( bat < 768 && bat > 20){
-                PIN15_setOutputValue(enable_5v, 0);
-                return false;
-            }else{
-                PIN15_setOutputValue(enable_5v, 1);  // enable 5V
-                TurnOn10V();
-                ModeLED(BT_WAIT);
-                return true;
-            }
-        } else {
-            TurnOnCounter++;
-            return false;
-        }
-    } else {
-        TurnOnCounter = 0;
-        PIN15_setOutputValue(enable_5v, 0);  // disable 5V
-        return false;
-    }
-}
-
-static void EliteKeyPress(uint8_t key) {
-    static uint16_t ShutDownCounter = 0;
-    static uint8_t OriginEliteFxn  = 0;
-
-    if (key == 0) {
-        // key = 0 if press
-        // press key => bight LED
-
-        if (ShutDownCounter == CLOCK_ONE_SECOND) {
-            KEYLED();
-        }
-
-        // press 3~4 sec, shutdown 2650
-        else if (ShutDownCounter > (CLOCK_ONE_SECOND*3) ) {
-            LED_color(DARKLED, 0xFF, 0xFF, 0x00);
-            PIN15_setOutputValue(enable_5v, 0);  // disable 5V
-        }
-        ShutDownCounter ++;
-    } else {
-        if (OriginEliteFxn == INSTRUCTION.eliteFxn) {  // old function == currunt instruction
-            if (ShutDownCounter != 0) {
-                // dark LED
-                checkFlafLED();
-                ShutDownCounter = 0;
-            }
-        } else {  // old function != currunt instruction
-            OriginEliteFxn = INSTRUCTION.eliteFxn;
-            if (ShutDownCounter != 0) {
-                ShutDownCounter = 0;
-            }
-            checkFlafLED();
-        }
-    }
-}
-
-static void TurnOn10V() {
-    If10Von = true;
-    PIN15_setOutputValue(enable_10v, 1);
-    CPUdelay(8000);
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteLED.h

@@ -1,182 +0,0 @@
-
-#ifndef ELITELED
-#define ELITELED
-
-#define DARKLED                  0xE1
-#define LIGHTLED                 0xE8
-
-static void WorkModeLED();
-
-static void LED_color(uint8_t bright, uint8_t red, uint8_t green, uint8_t blue) {
-    spi_LEDtxbuf[0] = 0x0000;
-    spi_LEDtxbuf[1] = 0x0000;
-    for (int i = 2; i < SPI_LED_SIZE - 2; i += 2) {
-        spi_LEDtxbuf[i]     = 0xE000 | ((uint16_t)bright << 8) | blue;
-        spi_LEDtxbuf[i + 1] = ((uint16_t)green << 8) | red;
-    }
-
-    spi_LEDtxbuf[SPI_LED_SIZE - 2] = 0xffff;
-    spi_LEDtxbuf[SPI_LED_SIZE - 1] = 0xffff;
-
-    LED_SPI(SPI_LED_SIZE, spi_LEDtxbuf, spi_LEDrxbuf);
-
-}
-
-static void Elite_led_color(uint16_t color){
-    switch (color) {
-        case COLOR_RED: {
-            LED_color(DARKLED, 0x50, 0x00, 0x00);
-            break;
-        }
-        case COLOR_ORANGE: {
-            LED_color(DARKLED, 0x50, 0x58, 0x09);
-            break;
-        }
-        case COLOR_YELLOW: {
-            LED_color(LIGHTLED, 0x50, 0x80, 0x00);
-            break;
-        }
-        case COLOR_GREEN: {
-            LED_color(DARKLED, 0x00, 0xFA, 0x00);
-            break;
-        }
-        case COLOR_YELLOWGREEN: {
-            LED_color(DARKLED, 0x64, 0xA6, 0x00);
-            break;
-        }
-        case COLOR_BLUE: {
-            LED_color(DARKLED, 0x00, 0x00, 0xAA);
-            break;
-        }
-        case COLOR_CYAN: {
-            LED_color(DARKLED, 0x00, 0x40, 0x40);
-            break;
-        }
-        case COLOR_MAGENTA: {
-            LED_color(DARKLED, 0x50, 0x00, 0x80);
-            break;
-        }
-        case COLOR_PURPLE: {
-            LED_color(DARKLED, 0x50, 0x00, 0xFF);
-            break;
-        }
-        case COLOR_WHITE: {
-            LED_color(DARKLED, 0x50, 0xFF, 0xFF);
-            break;
-        }
-        case COLOR_BLACK: {
-            LED_color(0x00, 0x00, 0x00, 0x00);
-            break;
-        }
-        default: {
-            break;
-        }
-    }
-}
-
-static void ModeLED(uint16_t modeStatus) {
-    btWaitLedFlag   = 0;
-    noEventLedFlag  = 0;
-    preWorkLedFlag  = 0;
-    workingLedFlag  = 0;
-    postWorkLedFlag = 0;
-
-    switch (modeStatus) {
-    case BT_WAIT: {
-        btWaitLedFlag = 1;
-        BT_WAIT_LED();
-        break;
-    }
-    case NO_EVENT: {
-        noEventLedFlag = 1;
-        LEDPowerON();
-        break;
-    }
-    case PRE_WORK: {
-        preWorkLedFlag = 1;
-        Elite_led_color(COLOR_BLUE);
-        break;
-    }
-    case WORKING: {
-        workingLedFlag = 1;
-        WorkModeLED();
-        break;
-    }
-    case POST_WORK: {
-        postWorkLedFlag = 1;
-        Elite_led_color(COLOR_BLUE);
-        break;
-    }
-    default: {
-        LEDPowerON();
-        break;
-    }
-    }
-}
-
-static void checkFlafLED() {
-    if(btWaitLedFlag == 1){
-        ModeLED(BT_WAIT);
-    }
-    else if(noEventLedFlag == 1){
-        ModeLED(NO_EVENT);
-    }
-    else if(preWorkLedFlag == 1){
-        ModeLED(PRE_WORK);
-    }
-    else if(workingLedFlag == 1){
-        ModeLED(WORKING);
-    }
-    else if(postWorkLedFlag == 1){
-        ModeLED(POST_WORK);
-    }
-}
-
-static void WorkModeLED() {
-    switch (INSTRUCTION.eliteFxn) {
-    case IV_CURVE:
-    case CV_CURVE:
-    case DIFFERENTIAL_PULSE_VOLTAMMETRY:
-    case SQUARE_WAVE_VOLTAMMETRY:
-    case VOLT_OUTPUT:
-    case ZT_CURVE:
-    case VT_CURVE:
-    case IT_CURVE:
-    case ADC_TEST:
-    case CYCLIC_VOLTAMMETRY:
-    case LINEAR_SWEEP_VOLTAMMETRY:
-    case CONSTANT_VSCAN:{
-        WORKLED();
-        break;
-    }
-    case PULSE_MODE:{
-//        Elite_led_color(COLOR_YELLOW);
-        WORKLED();
-        break;
-    }
-    case CONSTANT_CURRENT:{
-        WORKLED();
-        break;
-    }
-    case CALI_ADC_MODE:{
-        if(INSTRUCTION.AdcChannel == IIN_ADC){
-            Elite_led_color(COLOR_RED);
-        }else if(INSTRUCTION.AdcChannel == VIN_ADC){
-            Elite_led_color(COLOR_ORANGE);
-        }else if(INSTRUCTION.AdcChannel == VOUT_DAC){
-            Elite_led_color(COLOR_BLUE);
-        }
-        break;
-    }
-//    case VIS_RST: {
-//        LEDPowerON();
-//        break;
-//    }
-    default: {
-        WORKLED();
-        break;
-    }
-    }
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteLSVMode.h

@@ -1,98 +0,0 @@
-#ifndef ELITELSV
-#define ELITELSV
-
-#define Vset INSTRUCTION.Vset
-
-static uint16_t LSVCurve(LSVMode *LSV){
-    static uint16_t DACOutCode;
-    static int32_t Vin;
-    static int32_t Vout;
-    static int32_t DeltaVout;
-
-    Vin = LSV->_measureVin * 200;//[5nV]
-    if(DACReset){
-        Vout = Vset + Vin;
-        DACReset = false;
-    }else{
-        DeltaVout = Vset - (Vout - Vin);
-        Vout = Vout + DeltaVout;
-    }
-
-    INSTRUCTION.VoltConstant = Vout / 40000 + 25000;//5nV=>usercode
-    DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, INSTRUCTION.VoltConstant);
-
-    int32_t RealV2;
-    RealV2 = (int32_t)((Vout - Vin) / 200);//[1uV]
-    InputNotify(NOTIFY_VOLT, RealV2);
-
-    int32_t RealV;
-    RealV = (int32_t)(Vout / 200);//[1uV]
-    InputNotify(NOTIFY_IMPEDANCE, RealV);
-
-    DAC_outputV(DACOutCode);
-//
-     return DACOutCode;
-}
-
-static void LSV_Vscan(LSVMode *LSV){
-
-    NotifyCycleNumber = (INSTRUCTION.cycleNumber - LSV->_cycleNumber + 1);
-
-    if(vscanReset){
-        if(INSTRUCTION.directionInit == 1){
-            LSV->_direction_up         = true;
-            LSV->_current_direction_up = true;
-        }else{
-            LSV->_direction_up         = false;
-            LSV->_current_direction_up = false;
-        }
-
-         //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if(INSTRUCTION.step <= 10){
-            LSV->_Vstep = INSTRUCTION.step *  INSTRUCTION.VsetRate / 5;
-        }else{
-            LSV->_Vstep = INSTRUCTION.step / 5 *  INSTRUCTION.VsetRate;
-        }
-
-        Vset = LSV->_Vinit;
-    }
-
-    if(!vscanReset){
-
-        if (LSV->_current_direction_up){
-            Vset = Vset + LSV->_Vstep * GPT.GptimerMultiple;
-        }else{
-            Vset = Vset - LSV->_Vstep * GPT.GptimerMultiple;
-        }
-
-        /*stop condition*/
-        if (Vset >= LSV->_Vmax){
-            ModeLED(POST_WORK);
-//            PeriodicEvent = false;
-            Vset = LSV->_Vmin;
-            InitEliteFlag();
-            INSTRUCTION.eliteFxn   = CONSTANT_CURRENT;
-            INSTRUCTION.sampleRate = 15;
-            INSTRUCTION.charge     = 0x01;
-            INSTRUCTION.constantCurrent = 0x00;
-            INSTRUCTION.Vmax       = 0xC350;
-            INSTRUCTION.Vmin       = 0x0000;
-            INSTRUCTION.notifyRate = 500;
-            INSTRUCTION.VoViSwitch = 0x02;//read Vscan = Vout - Vin
-        }else if (Vset <= LSV->_Vmin){
-            ModeLED(POST_WORK);
-//            PeriodicEvent = false;
-            Vset = LSV->_Vmax;
-            InitEliteFlag();
-            INSTRUCTION.eliteFxn   = CONSTANT_CURRENT;
-            INSTRUCTION.sampleRate = 15;
-            INSTRUCTION.charge     = 0x01;
-            INSTRUCTION.constantCurrent = 0x00;
-            INSTRUCTION.Vmax       = 0xC350;
-            INSTRUCTION.Vmin       = 0x0000;
-            INSTRUCTION.notifyRate = 500;
-            INSTRUCTION.VoViSwitch = 0x02;//read Vscan = Vout - Vin
-        }
-    }
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteLatchInit.h

@@ -1,16 +0,0 @@
-
-#ifndef ELITE_LATCH_INIT
-#define ELITE_LATCH_INIT
-
-static void InitLH() {
-    for (int i=0; i<LATCH_BUFF_SIZE; i++) {
-        LH.LATCH0[i]       = 0;
-        LH.LATCH1[i]       = 0;
-        LH.LATCH2[i]       = 0;
-    }
-    LH.LoadState    = 0;
-}
-
-
-#endif
-

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteNotify.h

@@ -1,188 +0,0 @@
-/**
- * notify data buffer.
- * the length equals to the characteristic 4 which value is 20 bytes.
- *
- */
-
-#ifndef ELITENOTIFY
-#define ELITENOTIFY
-
-#include "headstage.h"
-
-/*notify's input type*/
-#define NOTIFY_CURRENT   0
-#define NOTIFY_VOLT      1
-#define NOTIFY_IMPEDANCE 2
-#define NOTIFY_VOLT_BAT  3
-
-#define NOT_BUF_OFFSET_INIT 8
-
-/**
- * the index where to start insert data into buffer.
- * start from 6.
- */
-static size_t   not_buf_offset = NOT_BUF_OFFSET_INIT;
-static uint32_t not_time_stamp;
-
-static uint8_t  NotifyCurrent[4]   = {0};
-static uint8_t  NotifyVolt[4]      = {0};
-static uint8_t  NotifyImpedance[4] = {0};
-static uint8_t  NotifyVoltBat[4]   = {0};
-static uint16_t NotifyCycleNumber  = 0;
-
-// ****************** New Notify Format ******************************** //
-/*
- * Notify format
- *
- *
-         |               |   1           |       2       |           3   |
-         0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2
-         -----------------------------------------------------------------
-         |    header     |
-         |    current                                                    |
-         | voltage or impedance                                          |
-         |  mode & gain  |
-         |    time stamp                                                 |
-         |  cycle number |
-
-
-    mode & gain
-        this byte include Elite working mode and ADC gain level
-        we use "(mode & 0xF0) | (gain & 0x0F)" to encode these two information
-
-     cycle number
-         for cyclic voltammetry use, we save it as channel number.
-         0xFF
-
-  * header = device ID
-  * I = current (0.001nA), V = voltage (mV),
-  * Z = impedance (k ohm), T = time (ms)
-  *
-  *
-*/
-// ********* End New Format Notify ***************************************** //
-
-/*
- * Notify format
- *
- *
-         |               |   1           |       2       |           3   |
-         0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2
-         -----------------------------------------------------------------
-         |    header     |
-         |    current                                                    |
-         |    voltage                                                    |
-         |    impedance                                                  |
-         |    time stamp                                                 |
-         |  cycle number |
-
-     cycle number
-         for cyclic voltammetry use, we save it as channel number.
-         0xFF
-
-  * header = device ID
-  * I = current (nA),    V = voltage (uV),
-  * Z = impedance (ohm), T = time (ms)
-  *
-  *
-*/
-static void SendNotify() {
-    initDATBuf();
-
-    not_buf[0] = INSTRUCTION.chip_id;
-
-    for (int i = 0; i < 4; i++) {
-        not_buf[i + 1] = NotifyCurrent[i];
-        not_buf[i + 5] = NotifyVolt[i];
-        not_buf[i + 9] = NotifyImpedance[i];
-    }
-
-    // 1 Timestamp = 32 usec;  31 Timestamp ~= 1 msec
-    not_time_stamp = (Timestamp_get32()) / 31;  // msec
-
-    not_buf[13] = not_time_stamp & 0xff;
-    not_buf[14] = (not_time_stamp >> 8) & 0xff;
-    not_buf[15] = (not_time_stamp >> 16) & 0xff;
-    not_buf[16] = (not_time_stamp >> 24) & 0xff;
-
-    not_buf[17] = (NotifyCycleNumber >> 8) & 0xff;
-    not_buf[18] = NotifyCycleNumber & 0xff;
-
-    for (int i = 19; i < BLE_DAT_BUFF_SIZE; i++){
-        not_buf[i] = 0;
-    }
-
-    SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
-}
-
-static void initDATBuf(){
-    for (int i = 0; i < BLE_DAT_BUFF_SIZE; i++){
-        not_buf[i] = 0;
-    }
-}
-
-static void initINSBuf(){
-    for (int i = 0; i < BLE_INS_BUFF_SIZE; i++){
-        ins_buf[i] = 0;
-    }
-}
-
-static void initCISBuf(){
-    for (int i = 0; i < BLE_CIS_BUFF_SIZE; i++){
-        cis_buf[i] = 0;
-    }
-}
-
-static void initRawDataBuf(){
-    not_time_stamp    = 0;
-    NotifyCycleNumber = 0;
-
-    for (int i = 0; i < 4; i++){
-        NotifyCurrent[i]   = 0;
-        NotifyVolt[i]      = 0;
-        NotifyImpedance[i] = 0;
-    }
-}
-
-static void FlushNotify(){
-    initRawDataBuf();
-    initDATBuf();
-
-    not_buf[0] = INSTRUCTION.chip_id;
-
-    SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
-}
-
-static void InputNotify(int NotifyType, int32_t Data){
-
-    switch (NotifyType) {
-        case NOTIFY_CURRENT:
-            NotifyCurrent[0] = (uint8_t)((Data & 0xFF000000) >> 24);
-            NotifyCurrent[1] = (uint8_t)((Data & 0x00FF0000) >> 16);
-            NotifyCurrent[2] = (uint8_t)((Data & 0x0000FF00) >> 8);
-            NotifyCurrent[3] = (uint8_t)(Data & 0x000000FF);
-            break;
-
-        case NOTIFY_IMPEDANCE:
-            NotifyImpedance[0] = (uint8_t)((Data & 0xFF000000) >> 24);
-            NotifyImpedance[1] = (uint8_t)((Data & 0x00FF0000) >> 16);
-            NotifyImpedance[2] = (uint8_t)((Data & 0x0000FF00) >> 8);
-            NotifyImpedance[3] = (uint8_t)(Data & 0x000000FF);
-            break;
-
-        case NOTIFY_VOLT :
-            NotifyVolt[0] = (uint8_t)((Data & 0xFF000000) >> 24);
-            NotifyVolt[1] = (uint8_t)((Data & 0x00FF0000) >> 16);
-            NotifyVolt[2] = (uint8_t)((Data & 0x0000FF00) >> 8);
-            NotifyVolt[3] = (uint8_t)(Data & 0x000000FF);
-            break;
-
-        case NOTIFY_VOLT_BAT :
-            NotifyVoltBat[0] = (uint8_t)((Data & 0xFF000000) >> 24);
-            NotifyVoltBat[1] = (uint8_t)((Data & 0x00FF0000) >> 16);
-            NotifyVoltBat[2] = (uint8_t)((Data & 0x0000FF00) >> 8);
-            NotifyVoltBat[3] = (uint8_t)(Data & 0x000000FF);
-            break;
-    }
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/ElitePulseMode.h

@@ -1,112 +0,0 @@
-#ifndef ELITEPULSE
-#define ELITEPULSE
-
-#define Vset INSTRUCTION.Vset
-
-static void PULSE_Vscan(PULSEMode *PULSE)
-{
-    static uint16_t lastVolt;
-    if (stiFirstTime) {
-        stiFirstTime = false;
-        lastVolt = 25000;
-        PULSE->_sti_t_flag = 1;
-        PULSE->_sti_v = PULSE->_sti_v1;
-        PULSE->_sti_t = PULSE->_sti_t1;
-        if (PULSE->_sti_t == 1) {
-            PULSE->_sti_v = lastVolt;
-        }
-    } else if(!stiFirstTime) {
-        if (GPT.StiCounter >= PULSE->_sti_t) {
-            GPT.StiCounter -= PULSE->_sti_t; //to get right time
-
-            if (PULSE->_sti_lp > 0) {
-                if (PULSE->_sti_cy > 0) {
-                    if (PULSE->_sti_t_flag == 1) {
-                        PULSE->_sti_t_flag = 2;
-                        PULSE->_sti_v = PULSE->_sti_v2;
-                        PULSE->_sti_t = PULSE->_sti_t2;
-                        if (PULSE->_sti_t == 1) {
-                            PULSE->_sti_v = lastVolt;
-                        }
-                    } else if (PULSE->_sti_t_flag == 2) {
-                        PULSE->_sti_t_flag = 3;
-                        PULSE->_sti_v = PULSE->_sti_v3;
-                        PULSE->_sti_t = PULSE->_sti_t3;
-                        if (PULSE->_sti_t == 1) {
-                            PULSE->_sti_v = lastVolt;
-                        }
-                    } else if (PULSE->_sti_t_flag == 3) {
-                        PULSE->_sti_cy -- ;
-                        if (PULSE->_sti_cy == 0) {
-                            PULSE->_sti_t_flag = 4;
-                            PULSE->_sti_v = PULSE->_sti_v4;
-                            PULSE->_sti_t = PULSE->_sti_t4;
-                            if (PULSE->_sti_t == 1) {
-                                PULSE->_sti_v = lastVolt;
-                            }
-                        } else {
-                            PULSE->_sti_t_flag = 2;
-                            PULSE->_sti_v = PULSE->_sti_v2;
-                            PULSE->_sti_t = PULSE->_sti_t2;
-                            if (PULSE->_sti_t == 1) {
-                                PULSE->_sti_v = lastVolt;
-                            }
-                        }
-                    }
-                } else if (PULSE->_sti_cy <= 0){
-                    if (PULSE->_sti_t_flag == 4) {
-                        PULSE->_sti_lp -- ;
-                        if (PULSE->_sti_lp > 0) {
-                            PULSE->_sti_cy = INSTRUCTION.sti_cy;
-                            PULSE->_sti_t_flag = 2;
-                            PULSE->_sti_v = PULSE->_sti_v2;
-                            PULSE->_sti_t = PULSE->_sti_t2;
-                            if (PULSE->_sti_t == 1) {
-                                PULSE->_sti_v = lastVolt;
-                            }
-                        } else {
-                            PULSE->_sti_t_flag = 5;
-                            PULSE->_sti_v = PULSE->_sti_v5;
-                            PULSE->_sti_t = PULSE->_sti_t5;
-                            if (PULSE->_sti_t == 1) {
-                                PULSE->_sti_v = lastVolt;
-                            }
-                        }
-                    }
-                }
-            } else if (PULSE->_sti_lp <= 0) {
-                if (PULSE->_sti_t_flag == 5) {
-                    PULSE->_sti_t_flag = 6;
-                    PULSE->_sti_v = PULSE->_sti_v6;
-                    PULSE->_sti_t = PULSE->_sti_t6;
-                    if (PULSE->_sti_t == 1) {
-                        PULSE->_sti_v = lastVolt;
-                    }
-                } else if (PULSE->_sti_t_flag == 6) {
-                    PULSE->_sti_t_flag = 7;
-                    PULSE->_sti_v = PULSE->_sti_v7;
-                    PULSE->_sti_t = PULSE->_sti_t7;
-                    if (PULSE->_sti_t == 1) {
-                        PULSE->_sti_v = lastVolt;
-                    }
-                } else if (PULSE->_sti_t_flag == 7) {
-                    PULSE->_sti_v = 25000;
-                    PeriodicEvent  = false;
-                    ModeLED(NO_EVENT);
-                }
-            }
-        }
-    }
-
-    if (lastVolt != PULSE->_sti_v) {
-        lastVolt = PULSE->_sti_v;
-        //if (PULSE->_sti_v == 25000) {
-        //    PIN15_setOutputValue(HIGH_Z_MODE, 0);   // 1 => close high_z mode
-        //} else {
-        //    PIN15_setOutputValue(HIGH_Z_MODE, 1);   // 1 => close high_z mode
-        //}
-        DAC_outputV(Usercode_Correction_to_DAC(VOUT_GAIN_240K, PULSE->_sti_v));
-        DAC_outputV(Usercode_Correction_to_DAC(VOUT_GAIN_240K, PULSE->_sti_v));
-    }
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteReset.h

@@ -1,77 +0,0 @@
-
-#ifndef ELITERESET
-#define ELITERESET
-
-static void reset() {
-    megaStiEnable  = false;
-    ModeLED(NO_EVENT);
-    InitEliteFlag();
-    InitFlag();
-    InitCT();
-    InitGPT();
-
-    PIN15_setOutputValue(HIGH_Z_MODE, 1);   // 0 => open high_z mode
-
-    VinADCGainControl(VIN_GAIN_AUTO);
-    IinADCGainControl(I_GAIN_AUTO);
-
-    INSTRUCTION.VoutGainLevel = VOUT_GAIN_15K;
-    VoutGainControl(INSTRUCTION.VoutGainLevel);
-    DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, 25000));
-
-    initINSBuf();
-    initDATBuf();
-
-    for (int i = 0; i < SPI_LED_SIZE; i++) {
-        spi_LEDtxbuf[i] = 0;
-        spi_LEDrxbuf[i] = 0;
-    }
-
-    for (int i = 0; i < SPI_DAC_SIZE; i++) {
-        spi_DACtxbuf[i] = 0;
-        spi_rxbuf[i]    = 0;
-    }
-
-    for (int i = 0; i < SPI_ADC_SIZE; i++) {
-        spi_ADC_txbuf[i] = 0;
-        spi_ADC_rxbuf[i] = 0;
-    }
-
-    CPUdelay(1600);
-}
-
-static void Eliteinterrupt() {
-    megaStiEnable  = false;
-    ModeLED(NO_EVENT);
-    InitFlag();
-    InitEliteFlag();
-    InitCT();
-    InitGPT();
-
-    PIN15_setOutputValue(HIGH_Z_MODE, 1);   // 0 => open high_z mode
-
-//    INSTRUCTION.VoutGainLevel = VOUT_GAIN_15K;
-//    VoutGainControl(INSTRUCTION.VoutGainLevel);
-//    DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, 25000));
-
-    initINSBuf();
-    initDATBuf();
-
-    for (int i = 0; i < SPI_LED_SIZE; i++) {
-        spi_LEDtxbuf[i] = 0;
-        spi_LEDrxbuf[i] = 0;
-    }
-
-    for (int i = 0; i < SPI_DAC_SIZE; i++) {
-        spi_DACtxbuf[i] = 0;
-        spi_rxbuf[i]    = 0;
-    }
-
-    for (int i = 0; i < SPI_ADC_SIZE; i++) {
-        spi_ADC_txbuf[i] = 0;
-        spi_ADC_rxbuf[i] = 0;
-    }
-
-    CPUdelay(8000);
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteSPI.h

@@ -1,136 +0,0 @@
-
-#ifndef ELITE_SPI
-#define ELITE_SPI
-
-/*
-* Read SPI example in
-* http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/tirtos/2_14_02_22/
-*        exports/tirtos_full_2_14_02_22/docs/doxygen/html/_s_p_i_c_c26_x_x_d_m_a_8h.html
-*/
-
-#include <Board.h>
-#include <ti/drivers/SPI.h>
-#include <ti/drivers/dma/UDMACC26XX.h>
-#include <ti/drivers/spi/SPICC26XXDMA.h>
-#include "Elite_PIN.h"
-
-/* application use SPI parameters and buffers */
-#define SPI_LED_SIZE 28
-#define SPI_DAC_SIZE 3
-#define SPI_ADC_SIZE 4
-
-static uint16_t spi_LEDtxbuf[SPI_LED_SIZE] = {0};
-static uint16_t spi_LEDrxbuf[SPI_LED_SIZE] = {0};
-
-static uint8_t spi_DACtxbuf[SPI_DAC_SIZE] = {0};
-static uint8_t spi_rxbuf[SPI_DAC_SIZE]    = {0};
-
-static uint8_t spi_ADC_txbuf[SPI_ADC_SIZE] = {0};
-static uint8_t spi_ADC_rxbuf[SPI_ADC_SIZE] = {0};
-
-/* system use SPI parameters */
-static SPI_Handle      spiHandle0 = NULL;  // SPI0  = LED
-static SPI_Handle      spiHandle1 = NULL;  // SPI1  = ADC +DAC
-static SPI_Params      spiParams0;
-static SPI_Params      spiParams1;
-static SPI_Transaction LED_transaction;
-static SPI_Transaction ADC_DAC_transaction;
-
-static void ELITE15_SPI_HOLD();
-static void ELITE15_SPI_CLOSE();
-
-static void Elite_SPI_init(){
-    SPI_init();
-    SPI_Params_init(&spiParams0);
-    spiParams0.bitRate     = 2000;  // 12k
-    spiParams0.mode        = SPI_MASTER;
-    spiParams0.dataSize    = 16;
-    spiParams0.frameFormat = SPI_POL0_PHA1;
-    spiHandle0 = SPI_open(Board_SPI0, &spiParams0);  // LED SPI
-
-    SPI_Params_init(&spiParams1);
-    spiParams1.bitRate     = 1000000;  // 1M
-    spiParams1.mode        = SPI_MASTER;
-    spiParams1.dataSize    = 8;
-    spiParams1.frameFormat = SPI_POL0_PHA1;
-    spiHandle1 = SPI_open(Board_SPI1, &spiParams1);  // ADC DAC SPI
-}
-
-static void LED_SPI(uint8_t length, uint16_t *spi_txbuf, uint16_t *spi_rxbuf) {
-    LED_transaction.count = length;
-    LED_transaction.txBuf = spi_txbuf;
-    LED_transaction.rxBuf = spi_rxbuf;
-
-    SPI_transfer(spiHandle0, &LED_transaction);
-}
-
-static void ADC_SPI(uint8_t length, uint8_t *spi_txbuf, uint8_t *spi_rxbuf) {
-//    PIN15_setOutputValue(ADC_CS, 0);  // ADC_CS LOW
-    PIN_setOutputValue(pin_handle, LOAD0, 1);
-    PIN_setOutputValue(pin_handle, D6, 0); // ADC_CS LOW
-
-    ADC_DAC_transaction.count = length;
-    ADC_DAC_transaction.txBuf = spi_txbuf;
-    ADC_DAC_transaction.rxBuf = spi_rxbuf;
-
-    SPI_transfer(spiHandle1, &ADC_DAC_transaction);
-
-    PIN_setOutputValue(pin_handle, D6, 1); // ADC_CS HIGH
-    update_latch_status (ADC_CS, 1);
-//    PIN15_setOutputValue(ADC_CS, 1);  // ADC_CS HIGH
-}
-
-static void DAC_SPI(uint8_t length, uint8_t *spi_txbuf, uint8_t *spi_rxbuf) {
-//    PIN15_setOutputValue(DAC_CS, 0);            // DAC_CS LOW
-    PIN_setOutputValue(pin_handle, LOAD0, 1);
-    PIN_setOutputValue(pin_handle, D7, 0); // DAC_CS LOW
-
-    ADC_DAC_transaction.count = length;
-    ADC_DAC_transaction.txBuf = spi_txbuf;
-    ADC_DAC_transaction.rxBuf = spi_rxbuf;
-
-    SPI_transfer(spiHandle1, &ADC_DAC_transaction);
-
-    PIN_setOutputValue(pin_handle, D7, 1); // DAC_CS HIGH
-    update_latch_status (DAC_CS, 1);
-//    PIN15_setOutputValue(DAC_CS, 1);            // DAC_CS HIGH
-}
-
-static void ELITE15_SPI_HOLD() {
-    Elite_SPI_init();
-
-    PIN_setOutputValue(pin_handle, D6, LH.LATCH0[6]);   // ADC_CS
-    PIN_setOutputValue(pin_handle, D7, LH.LATCH0[7]);   // DAC_CS
-    PIN_setOutputValue(pin_handle, D4, LH.LATCH0[4]);   // update HIGH_Z_MODE
-
-    PIN_setOutputValue(pin_handle, LOAD0, 1);
-    PIN_setOutputValue(pin_handle, LOAD1, 0);
-    PIN_setOutputValue(pin_handle, LOAD2, 0);
-}
-static void ELITE15_SPI_CLOSE() {
-    PIN_setOutputValue(pin_handle, LOAD0, 0);
-    PIN_setOutputValue(pin_handle, LOAD1, 0);
-    PIN_setOutputValue(pin_handle, LOAD2, 0);
-
-    SPI_close(spiHandle0);
-    SPI_close(spiHandle1);
-}
-
-/* Elite1.5 Calibration SPI */
-static void CAL_ADC_SPI(uint8_t length, uint8_t *spi_txbuf, uint8_t *spi_rxbuf) {
-//    PIN15_setOutputValue(ADC_CS, 0);  // ADC_CS LOW
-    PIN_setOutputValue(pin_handle, LOAD0, 1);
-    PIN_setOutputValue(pin_handle, D6, 0); // ADC_CS LOW
-
-    ADC_DAC_transaction.count = length;
-    ADC_DAC_transaction.txBuf = spi_txbuf;
-    ADC_DAC_transaction.rxBuf = spi_rxbuf;
-
-    SPI_transfer(spiHandle1, &ADC_DAC_transaction);
-
-    PIN_setOutputValue(pin_handle, D6, 1); // ADC_CS HOGH
-    update_latch_status (ADC_CS, 1);
-//    PIN15_setOutputValue(ADC_CS, 1);  // ADC_CS HIGH
-}
-
-#endif // ELITE_SPI

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteWorkData.h

@@ -1,621 +0,0 @@
-#ifndef ELITE_WORK_DATA
-#define ELITE_WORK_DATA
-
-#define CLOCK_ONE_SECOND 10000
-
-#include "EliteInstruction.h"
-
-static bool Free_Work_Mode = false;
-typedef void (*InitWorkData) ();
-
-/***** Template of Measure and VoltOut parameter *****/
-#define MEASURE                      \
-    int32_t  _measureCurrent;        \
-    int32_t  _measureVin;            \
-    int32_t  _measureVout;           \
-    int32_t  _measureBat;            \
-    uint8_t  _VoViSwitch
-
-#define VOUT_PARA                    \
-    int32_t  _Vinit;                 \
-    int32_t  _Vmax;                  \
-    int32_t  _Vmin;                  \
-    int32_t  _Vset;                  \
-    uint32_t _Vstep;                 \
-    bool     _direction_up;          \
-    bool     _current_direction_up;  \
-    uint16_t _cycleNumber
-
-// direction_up = true, if directionInit=1
-// current_direction_up = true, Vstep => positive. vice versa
-
-/*  CC Mode parameter
-*   @ Measure : measure current value (nA)
-*   @ Charge : Charge or Discharge
-*   @ BatteryV : Vin measure battery voltage (mV)
-*   @ value : constant current setting.
-*             Current value divide current level into 3,000,001 pieces
-*             1,500,000 is zero point; 3,000,000 is 15mA
-*             Current = (value - 1,500,000)/100,000 mA
-*   @ Done : Done = false => Ignore Vmin condition;
-*            Done will be true, if BatteryV <= Vmin last for about 12sec in discharge mode
-*   @ VMax : voltage upper bound in charge mode
-*            CC->value will set to zero if BatteryV >= VMax in charge mode
-*   @ VMin : voltage lower bound in charge mode
-*            CC->value will set to zero if BatteryV <=> VMin in charge mode
-*            Note that VMax and VMin are always larger or equal to zero
-*   @_Transform2RealnA : transform a current user code (IUC) to real current in nA
-*/
-#define CC_PARA \
-    int32_t _measureCurrent; \
-    uint8_t _VoViSwitch; \
-    uint8_t Charge; \
-    int32_t BatteryV;   \
-    int32_t value;  \
-    uint16_t Done;   \
-    uint32_t VMax;  \
-    uint16_t VMin;  \
-    int32_t _measureVin; \
-    int32_t Vset; \
-    int32_t Iset; \
-    int32_t (*_Transform2RealnA)(struct CCModePara *)
-
-#define LIMIT \
-    uint32_t _LimitValue; \
-    void (*SetLimitValue) (struct Limit *, uint32_t); \
-    uint32_t (*GetLimitValue) (struct Limit*)
-
-struct Measure{
-    MEASURE;
-};
-
-struct VoltOutPara{
-    VOUT_PARA;
-};
-
-struct Limit{
-    LIMIT;
-};
-
-struct CCModePara{
-    CC_PARA;
-};
-/***** End of Measure and VoltOut parameter *****/
-
-/**** Limit Mode ****/
-//LimitValue
-void _SetLimitValue(struct Limit *self, uint32_t LimitValue){
-    self->_LimitValue = LimitValue;
-}
-uint32_t _GetLimitValue(struct Limit *self){
-    return self->_LimitValue;
-}
-
-
-/* VoltOut Mode Data */
-typedef struct _VoltOutMode{
-    uint16_t _Vset;
-}VoltOutMode;
-
-VoltOutMode *InitVoltOutMode(){
-    VoltOutMode *ret = malloc(sizeof(VoltOutMode));
-    ret->_Vset = INSTRUCTION.VoltConstant;
-    return ret;
-}
-/* End of VoltOut Mode Data */
-
-/* IT Mode Data */
-typedef struct _ITMode{
-    MEASURE;
-}ITMode;
-
-ITMode * InitITMode(){
-    ITMode *ret = malloc(sizeof(ITMode));
-    ret->_measureCurrent = 0;
-    ret->_measureVin     = 0;
-    ret->_measureVout    = 0;
-    ret->_measureBat     = 0;
-    ret->_VoViSwitch     = INSTRUCTION.VoViSwitch;
-    return ret;
-}
-/* End of IT Mode Data */
-
-/* VT Mode Data */
-typedef struct _VTMode{
-    MEASURE;
-}VTMode;
-
-VTMode * InitVTMode(){
-    VTMode *ret = malloc(sizeof(VTMode));
-    ret->_measureCurrent = 0;
-    ret->_measureVin     = 0;
-    ret->_measureVout    = 0;
-    ret->_measureBat     = 0;
-    ret->_VoViSwitch     = INSTRUCTION.VoViSwitch;
-    return ret;
-}
-/* End of VT Mode Data */
-
-/* RT Mode Data */
-typedef struct _RTMode{
-    MEASURE;
-    int32_t  _Vset;
-}RTMode;
-
-RTMode * InitRTMode(){
-    RTMode *ret = malloc(sizeof(RTMode));
-    ret->_measureCurrent = 0;
-    ret->_measureVin     = 0;
-    ret->_measureVout    = 0;
-    ret->_measureBat     = 0;
-    ret->_VoViSwitch     = INSTRUCTION.VoViSwitch;
-    ret->_Vset           = INSTRUCTION.VoltConstant;
-    return ret;
-}
-/* End of RT Mode Data */
-
-/* IV Mode Data */
-typedef struct _IVMode{
-    MEASURE;
-    VOUT_PARA;
-}IVMode;
-
-IVMode *InitIVMode(){
-    IVMode *ret = malloc(sizeof(IVMode));
-    ret->_measureCurrent = 0;
-    ret->_measureVin     = 0;
-    ret->_measureVout    = 0;
-    ret->_measureBat     = 0;
-    ret->_VoViSwitch     = INSTRUCTION.VoViSwitch;
-    ret->_Vinit          = (INSTRUCTION.Vinit - 25000) * 4 * 10000; //[5nV]
-    ret->_Vmax           = (INSTRUCTION.Vmax  - 25000) * 4 * 10000; //[5nV]
-    ret->_Vmin           = (INSTRUCTION.Vmin  - 25000) * 4 * 10000; //[5nV]
-    ret->_Vset           = 0;
-    ret->_Vstep          = 0;
-    ret->_direction_up   = true;
-    ret->_current_direction_up = true;
-    ret->_cycleNumber    = INSTRUCTION.cycleNumber;
-    return ret;
-}
-/* End of IV Mode Data */
-
-/* CV Mode(CYCLE_IV)*/
-typedef struct _CVMode{
-    MEASURE;
-    VOUT_PARA;
-}CVMode;
-
-CVMode * InitCVMode(){
-    CVMode *ret = malloc(sizeof(CVMode));
-    ret->_measureCurrent = 0;
-    ret->_measureVin     = 0;
-    ret->_measureVout    = 0;
-    ret->_measureBat     = 0;
-    ret->_VoViSwitch     = INSTRUCTION.VoViSwitch;
-    ret->_Vinit          = (INSTRUCTION.Vinit - 25000) * 4 * 10000; //[5nV]
-    ret->_Vmax           = (INSTRUCTION.Vmax  - 25000) * 4 * 10000; //[5nV]
-    ret->_Vmin           = (INSTRUCTION.Vmin  - 25000) * 4 * 10000; //[5nV]
-    ret->_Vset           = 0;
-    ret->_Vstep          = 0;
-    ret->_direction_up   = true;
-    ret->_current_direction_up = true;
-    ret->_cycleNumber    = INSTRUCTION.cycleNumber;
-    return ret;
-}
-/*End of CV Mode*/
-
-/* CC Mode(CONSTANT_CURRENT)*/
-#define CC_ZERO_POINT     0
-#define MAX_DAC_UC    50000
-#define MIN_DAC_UC      0
-/*********************************************************************
- * @fn      Transform2RealnA
- *
- * @brief   transform an IUC into real current value in nA.
- *
- * @param   self, which is an IUC
- *
- * @return  an int32_t current value in nA
- */
-int32_t _Transform2RealnA(struct CCModePara *self){
-    int32_t IUCReal;
-
-    // self->value : 0 ~ 1500000 (which is 0 ~ 1500000 (10nA) )
-    if(self->Charge){
-        IUCReal = (self->value - CC_ZERO_POINT) * 10;
-    }
-    else{
-        IUCReal = -1 * (self->value - CC_ZERO_POINT) * 10;
-    }
-    return IUCReal;
-}
-
-typedef struct _CCMode{
-    MEASURE;
-    int32_t  _Vmax;
-    int32_t  _Vmin;
-    int32_t  _Vset;
-    int32_t  _Iset;
-    uint8_t  _charge;
-    int32_t (*_Transform2RealnA)(struct CCModePara *);
-}CCMode;
-
-CCMode * InitCCMode(){
-    CCMode *ret = malloc(sizeof(CCMode));
-    ret->_measureCurrent = 0;
-    ret->_measureVin     = 0;
-    ret->_measureVout    = 0;
-    ret->_measureBat     = 0;
-    ret->_VoViSwitch     = INSTRUCTION.VoViSwitch;
-    ret->_Vmax           = (INSTRUCTION.Vmax  - 25000) * 4 * 10000; //[5nV]
-    ret->_Vmin           = (INSTRUCTION.Vmin  - 25000) * 4 * 10000; //[5nV]
-    ret->_Vset           = 0;
-    ret->_Iset           = INSTRUCTION.constantCurrent * 200 ; //[50pA] //controller UI 15000uA => Elite 1500000 => 1500000 * 10 * 1000 / 50 [50pA]
-    ret->_charge         = INSTRUCTION.charge;
-    ret->_Transform2RealnA = &_Transform2RealnA;
-    return ret;
-}
-/*End of CC Mode*/
-
-/* CV3 Mode(CYCLIC_VOLTAMMETRY)*/
-typedef struct _CV3Mode{
-    MEASURE;
-    VOUT_PARA;
-}CV3Mode;
-
-CV3Mode * InitCV3Mode(){
-    CV3Mode *ret = malloc(sizeof(CV3Mode));
-    ret->_measureCurrent = 0;
-    ret->_measureVin     = 0;
-    ret->_measureVout    = 0;
-    ret->_measureBat     = 0;
-    ret->_VoViSwitch     = INSTRUCTION.VoViSwitch;
-	ret->_Vinit          = (INSTRUCTION.Vinit - 25000) * 4 * 10000; //[5nV]
-    ret->_Vmax           = (INSTRUCTION.Vmax  - 25000) * 4 * 10000; //[5nV]
-    ret->_Vmin           = (INSTRUCTION.Vmin  - 25000) * 4 * 10000; //[5nV]
-    ret->_Vset           = 0;
-    ret->_Vstep          = 0;
-    ret->_direction_up   = true;
-    ret->_current_direction_up = true;
-    ret->_cycleNumber    = INSTRUCTION.cycleNumber;
-    return ret;
-}
-/*End of CV3 Mode*/
-
-/* LSV Mode(LINEAR_SWEEP_VOLTAMMETRY)*/
-typedef struct _LSVMode{
-    MEASURE;
-    VOUT_PARA;
-}LSVMode;
-
-LSVMode * InitLSVMode(){
-    LSVMode *ret = malloc(sizeof(LSVMode));
-    ret->_measureCurrent = 0;
-    ret->_measureVin     = 0;
-    ret->_measureVout    = 0;
-    ret->_measureBat     = 0;
-    ret->_VoViSwitch     = INSTRUCTION.VoViSwitch;
-	ret->_Vinit          = (INSTRUCTION.Vinit - 25000) * 4 * 10000; //[5nV]
-    ret->_Vmax           = (INSTRUCTION.Vmax  - 25000) * 4 * 10000; //[5nV]
-    ret->_Vmin           = (INSTRUCTION.Vmin  - 25000) * 4 * 10000; //[5nV]
-    ret->_Vset           = 0;
-    ret->_Vstep          = 0;
-    ret->_direction_up   = true;
-    ret->_current_direction_up = true;
-    ret->_cycleNumber    = INSTRUCTION.cycleNumber;
-    return ret;
-}
-/*End of LSV Mode*/
-
-/* CONSTANT_VSCAN Mode(CONSTANT_VSCAN)*/
-typedef struct _CVSCANMode{
-    MEASURE;
-    int32_t  _Vinit;
-    int32_t  _Vset;
-}CVSCANMode;
-
-CVSCANMode * InitCVSCANMode(){
-    CVSCANMode *ret = malloc(sizeof(CVSCANMode));
-    ret->_measureCurrent = 0;
-    ret->_measureVin     = 0;
-    ret->_measureVout    = 0;
-    ret->_measureBat     = 0;
-    ret->_VoViSwitch     = INSTRUCTION.VoViSwitch;
-	ret->_Vinit          = (INSTRUCTION.Vinit - 25000) * 4 * 10000; //[5nV]
-    ret->_Vset           = 0;
-    return ret;
-}
-/*End of CONSTANT_VSCAN Mode*/
-
-/* PULSE_MODE Mode(PULSE_MODE)*/
-typedef struct _PULSEMode {
-    MEASURE;
-    int32_t  _Vset;
-    int32_t  _sti_v1;
-    int32_t  _sti_v2;
-    int32_t  _sti_v3;
-    int32_t  _sti_v4;
-    int32_t  _sti_v5;
-    int32_t  _sti_v6;
-    int32_t  _sti_v7;
-    int32_t  _sti_t1;
-    int32_t  _sti_t2;
-    int32_t  _sti_t3;
-    int32_t  _sti_t4;
-    int32_t  _sti_t5;
-    int32_t  _sti_t6;
-    int32_t  _sti_t7;
-    int32_t  _sti_t;
-    int32_t  _sti_v;         //output voltage now
-    int32_t  _sti_t_flag;    //Where's the time stage turn
-    uint16_t _sti_cy;
-    uint16_t _sti_lp;
-} PULSEMode;
-
-PULSEMode * InitPULSEMode() {
-    PULSEMode *ret = malloc(sizeof(PULSEMode));
-    ret->_measureCurrent = 0;
-    ret->_measureVin     = 0;
-    ret->_measureVout    = 0;
-    ret->_measureBat     = 0;
-    ret->_VoViSwitch     = INSTRUCTION.VoViSwitch;
-    ret->_Vset           = 0;
-    ret->_sti_v1         = INSTRUCTION.sti_v1;
-    ret->_sti_v2         = INSTRUCTION.sti_v2;
-    ret->_sti_v3         = INSTRUCTION.sti_v3;
-    ret->_sti_v4         = INSTRUCTION.sti_v4;
-    ret->_sti_v5         = INSTRUCTION.sti_v5;
-    ret->_sti_v6         = INSTRUCTION.sti_v6;
-    ret->_sti_v7         = INSTRUCTION.sti_v7;
-    ret->_sti_t1         = INSTRUCTION.sti_t1;
-    ret->_sti_t2         = INSTRUCTION.sti_t2;
-    ret->_sti_t3         = INSTRUCTION.sti_t3;
-    ret->_sti_t4         = INSTRUCTION.sti_t4;
-    ret->_sti_t5         = INSTRUCTION.sti_t5;
-    ret->_sti_t6         = INSTRUCTION.sti_t6;
-    ret->_sti_t7         = INSTRUCTION.sti_t7;
-    ret->_sti_t          = INSTRUCTION.sti_t1;
-    ret->_sti_v          = INSTRUCTION.sti_v1;
-    ret->_sti_t_flag     = 1;
-    ret->_sti_cy         = INSTRUCTION.sti_cy;
-    ret->_sti_lp         = INSTRUCTION.sti_loop;
-    return ret;
-}
-/*End of PULSE_MODE Mode*/
-
-/* Cycle CC Mode */
-typedef struct _CCCMode{
-    int32_t _measureCurrent;
-    uint8_t _VoViSwitch;
-    uint8_t Charge;
-    int32_t BatteryV;
-    int32_t value;
-    uint16_t Done;
-    uint32_t VMax;
-    uint32_t VMin;
-    int32_t _measureVin;
-    int32_t Vset;
-    int32_t Iset;
-    int32_t (*_Transform2RealnA)(struct CCModePara *);
-
-    /* Vmax and Vmin */
-    // Vmax protect battery charge
-    // Vmin protect battery discharge, uint = mV
-
-    /* Charge/Discharge Current */
-    int32_t ChargeCurrent;
-    int32_t DischargeCurrent;
-    uint8_t CycleNumber;
-
-    bool StandBy;
-    uint32_t StandByTime;
-}CCCMode;
-
-CCCMode * InitCCCMode(){
-    CCCMode *ret = malloc(sizeof(CCCMode));
-    ret->_measureCurrent = 0;
-    ret->Charge = 1;
-    ret->BatteryV = 0;
-
-    ret->value = CC_ZERO_POINT;
-    ret->VMax = MAX_DAC_UC;  // max DAC UserCode
-    ret->VMin = MIN_DAC_UC;  // min DAC UserCode
-    ret->ChargeCurrent = 0;
-    ret->DischargeCurrent = 0;
-    ret->CycleNumber = 0;
-    ret->StandBy = false;
-    ret->StandByTime = 0;
-    ret->_Transform2RealnA = &_Transform2RealnA;
-    return ret;
-}
-/* End of Cycle CC Mode */
-
-/** Potential State Mode **/
-typedef struct _PS{
-    // measure
-    int32_t _measureCurrent;
-    uint8_t _VoViSwitch;
-    int32_t ReferenceVolt;
-    int32_t _MeasureVolt;
-    uint16_t _VoltOut;
-    uint16_t _originVolt;
-    uint16_t _stopVolt;
-    uint16_t _step;
-    uint16_t _StepTime;
-    uint16_t _cycleNumber;
-}PSMode;
-
-PSMode *InitPSMode(){
-    PSMode *ret = malloc(sizeof(PSMode));
-    ret->_measureCurrent = 0;
-    ret->ReferenceVolt = 0;
-    ret->_MeasureVolt = INSTRUCTION.Ve1;
-
-    ret->_VoltOut = DAC_ZERO;  // 25000 is DAC_ZERO
-    ret->_originVolt = INSTRUCTION.Ve1;
-    ret->_stopVolt = INSTRUCTION.Ve2;
-    ret->_step  = INSTRUCTION.step;
-    ret->_StepTime = INSTRUCTION.StepTime; // STEPTIME_ONE_SEC
-    ret->_cycleNumber = INSTRUCTION.cycleNumber;
-    return ret;
-}
-/** End of Potential State Mode **/
-
-typedef union _WorkMode{
-
-    // Output Only
-    VoltOutMode *VO;
-
-    // Measure only
-    ITMode *IT;
-    VTMode *VT;
-
-    // Measure + Output
-    RTMode *RT;
-    IVMode *IV;
-    CVMode *CV;
-    CCMode *CC;
-    CV3Mode *CV3;
-    LSVMode *LSV;
-    CVSCANMode *CVSCAN;
-    PSMode *PS;
-    PULSEMode *PULSE;
-//    CCCMode *CCC;
-}WorkMode;
-
-WorkMode *CreateWorkMode(){
-    WorkMode *ret = malloc(sizeof(WorkMode));
-    return ret;
-}
-
-void InitWorkMode(WorkMode *WM){
-    switch(INSTRUCTION.eliteFxn){
-        case VOLT_OUTPUT:
-        case CALI_DAC_MODE:
-            WM->VO = InitVoltOutMode();
-            break;
-        case IT_CURVE:
-            WM->IT = InitITMode();
-            break;
-        case VT_CURVE:
-            WM->VT = InitVTMode();
-            break;
-        case ZT_CURVE:
-            WM->RT = InitRTMode();
-            break;
-        case IV_CURVE:
-            WM->IV = InitIVMode();
-            break;
-        case CV_CURVE:
-            WM->CV = InitCVMode();
-            break;
-        case CONSTANT_CURRENT:
-            WM->CC = InitCCMode();
-            break;
-        case CYCLIC_VOLTAMMETRY:
-            WM->CV3 = InitCV3Mode();
-            break;
-        case LINEAR_SWEEP_VOLTAMMETRY:
-            WM->LSV = InitLSVMode();
-            break;
-        case CONSTANT_VSCAN:
-            WM->CVSCAN = InitCVSCANMode();
-            break;
-        case PULSE_MODE:
-            WM->PULSE = InitPULSEMode();
-            break;
-//        case CYCLE_CONSTANT_CURRENT:
-//            WM->CCC = InitCCCMode();
-//            break;
-        default:
-            WM->VT = InitVTMode();
-            break;
-    }
-}
-
-void FreeWorkMode(WorkMode *WM){
-    switch(INSTRUCTION.eliteFxn){
-        case VOLT_OUTPUT:
-        case CALI_DAC_MODE:
-            if(WM->VO != NULL){
-                free(WM->VO);
-                WM->VO = NULL;
-            }
-            break;
-        case IT_CURVE:
-            if(WM->IT != NULL){
-                free(WM->IT);
-                WM->IT = NULL;
-            }
-            break;
-        case VT_CURVE:
-            if(WM->VT != NULL){
-                free(WM->VT);
-                WM->VT = NULL;
-            }
-            break;
-        case ZT_CURVE:
-            if(WM->RT != NULL){
-                free(WM->RT);
-                WM->RT = NULL;
-            }
-            break;
-        case IV_CURVE:
-            if(WM->IV != NULL){
-                free(WM->IV);
-                WM->IV = NULL;
-            }
-            break;
-        case CV_CURVE:
-            if(WM->CV != NULL){
-                free(WM->CV);
-                WM->CV = NULL;
-            }
-            break;
-        case CONSTANT_CURRENT:
-            if(WM->CC != NULL){
-                free(WM->CC);
-                WM->CC = NULL;
-            }
-            break;
-        case CYCLIC_VOLTAMMETRY:
-            if(WM->CV3 != NULL){
-                free(WM->CV3);
-                WM->CV3 = NULL;
-            }
-            break;
-        case LINEAR_SWEEP_VOLTAMMETRY:
-            if(WM->LSV != NULL){
-                free(WM->LSV);
-                WM->LSV = NULL;
-            }
-            break;
-        case CONSTANT_VSCAN:
-            if(WM->CVSCAN != NULL){
-                free(WM->CVSCAN);
-                WM->CVSCAN = NULL;
-            }
-            break;
-        case PULSE_MODE:
-            if(WM->PULSE != NULL){
-                free(WM->PULSE);
-                WM->PULSE = NULL;
-            }
-            break;
-//        case CYCLE_CONSTANT_CURRENT:
-//            if(WM->CCC != NULL){
-//                free(WM->CCC);
-//                WM->CCC = NULL;
-//            }
-//            break;
-        default:
-            if(WM->VT != NULL){
-                free(WM->VT);
-                WM->VT = NULL;
-            }
-            break;
-    }
-}
-
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteZTcurve.h

@@ -1,21 +0,0 @@
-
-#ifndef ELITEZT
-#define ELITEZT
-
-// output a certain voltage e.g. 2v
-// and measure the input voltage
-// => calculate the resister
-// change the output voltage step
-// => get a R-T curve (with resolution = 1 sample/volt step )
-
-static void ZT_Vscan(RTMode *RT){
-    if(vscanReset){
-        Vset = ((int32_t)(INSTRUCTION.VoltConstant) - 25000) * 4 * 10000; //[5nV]
-        OneWayVoltScan();
-    }
-
-    if(!vscanReset){
-
-    }
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_PIN.h

@@ -1,246 +0,0 @@
-
-#ifndef Elite_PIN
-#define Elite_PIN
-
-#include <ti/drivers/pin/PINCC26XX.h>
-#include <Board.h>
-#include <ti/drivers/PIN.h>
-
-/* SPI Board */
-#define Board_SPI0_MISO                 PIN_UNASSIGNED
-#define Board_SPI0_MOSI                 D1
-#define Board_SPI0_CLK                  D0
-#define Board_SPI0_CS                   PIN_UNASSIGNED
-
-#define Board_SPI1_MISO                 IOID_1
-#define Board_SPI1_MOSI                 D3
-#define Board_SPI1_CLK                  D2
-#define Board_SPI1_CS                   PIN_UNASSIGNED
-
-//#define clk_test_pin                    IOID_0
-#define D0                              IOID_3
-#define D1                              IOID_4
-#define D2                              IOID_5
-#define D3                              IOID_6
-#define D4                              IOID_7
-#define D5                              IOID_8
-#define D6                              IOID_9
-#define D7                              IOID_10
-
-#define LOAD0                           IOID_13
-#define LOAD1                           IOID_12
-#define LOAD2                           IOID_11
-
-#define ADC_CS                          LOAD0, D6
-#define DAC_CS                          LOAD0, D7
-#define ADC_DAC_SPI_MOSI                LOAD0, D3
-#define ADC_DAC_SPI_CLK                 LOAD0, D2
-#define LED_MOSI                        LOAD0, D1
-#define LED_CLK                         LOAD0, D0
-#define HIGH_Z_MODE                     LOAD0, D4
-#define MEM_CS                          LOAD0, D5
-
-#define Turnon_I_MID                    LOAD2, D0
-#define Turnon_I_SMALL                  LOAD2, D4
-#define Turnon_I_LARGE                  LOAD2, D1
-#define Turnon_V_SMALL                  LOAD2, D2
-#define Turnon_V_MID                    LOAD2, D3
-#define Turon_VOUT_SMALL                LOAD2, D7
-
-//#define Turnon10K                       Turnon_I_MID
-//#define Turnon200R                      Turnon_I_LARGE
-
-/* I2C */
-#ifdef ELITE_VERSION_1_4
-#define Board_I2C0_SCL0                 PIN_UNASSIGNED
-#define Board_I2C0_SDA0                 PIN_UNASSIGNED
-#endif
-
-#define shutdown_6994                   LOAD2, D6
-#define switch_on                       IOID_14
-//#define HIGH_Z_MODE                     LOAD2, D5
-#define enable_10v                      LOAD1, D5
-#define enable_5v                       LOAD1, D6
-#define MEM_HOLD                        LOAD1, D0
-
-PIN_Handle       pin_handle;
-static PIN_State ZM_rst;
-
-const PIN_Config BLE_IO[] = {
-//    D0 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-//    D1 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-//    D2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-//    D3 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    D4 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    D5 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    D6 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    D7 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-
-//    clk_test_pin | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-
-    LOAD0 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    LOAD1 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    LOAD2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-
-    switch_on | PIN_INPUT_EN | PIN_PULLDOWN,                                    // to sense switch
-
-    PIN_TERMINATE
-};
-
-static void add_elite_pin() {
-//    PIN_Status elite15_status;
-    PIN_add(pin_handle,
-    D0 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-    PIN_add(pin_handle,
-    D1 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-    PIN_add(pin_handle,
-    D2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-    PIN_add(pin_handle,
-    D3 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-
-//    if(elite15_status != PIN_SUCCESS) {
-//        LED_color(DARKLED, 0x0F, 0x0F, 0x0F);
-//    }
-}
-
-static void remove_elite_pin() {
-    PIN_close(pin_handle);
-    pin_handle = PIN_open(&ZM_rst, BLE_IO);
-}
-
-/*!
- *  @def    BOOSTXL_CC2650MA_SPIName
- *  @brief  Enum of SPI names on the CC2650 Booster Pack
- */
-typedef enum BOOSTXL_CC2650MA_SPIName {
-    BOOSTXL_CC2650MA_SPI0 = 0,
-    BOOSTXL_CC2650MA_SPI1 = 1,
-
-    BOOSTXL_CC2650MA_SPICOUNT
-} BOOSTXL_CC2650MA_SPIName;
-
-/*
- *  ========================== SPI DMA begin ===================================
- */
-/* Place into subsections to allow the TI linker to remove items properly */
-#if defined(__TI_COMPILER_VERSION__)
-#pragma DATA_SECTION(SPI_config, ".const:SPI_config")
-#pragma DATA_SECTION(spiCC26XXDMAHWAttrs, ".const:spiCC26XXDMAHWAttrs")
-#endif
-
-/* Include drivers */
-#include <ti/drivers/spi/SPICC26XXDMA.h>
-
-/* SPI objects */
-SPICC26XXDMA_Object spiCC26XXDMAObjects[BOOSTXL_CC2650MA_SPICOUNT];
-
-/* SPI configuration structure, describing which pins are to be used */
-const SPICC26XXDMA_HWAttrsV1 spiCC26XXDMAHWAttrs[BOOSTXL_CC2650MA_SPICOUNT] = {
-    {
-        .baseAddr           = SSI0_BASE,
-        .intNum             = INT_SSI0_COMB,
-        .intPriority        = ~0,
-        .swiPriority        = 0,
-        .powerMngrId        = PowerCC26XX_PERIPH_SSI0,
-        .defaultTxBufValue  = 0,
-        .rxChannelBitMask   = 1<<UDMA_CHAN_SSI0_RX,
-        .txChannelBitMask   = 1<<UDMA_CHAN_SSI0_TX,
-        .mosiPin            = Board_SPI0_MOSI,
-        .misoPin            = Board_SPI0_MISO,
-        .clkPin             = Board_SPI0_CLK,
-        .csnPin             = Board_SPI0_CS
-    },
-    {
-        .baseAddr           = SSI1_BASE,
-        .intNum             = INT_SSI1_COMB,
-        .intPriority        = ~0,
-        .swiPriority        = 0,
-        .powerMngrId        = PowerCC26XX_PERIPH_SSI1,
-        .defaultTxBufValue  = 0,
-        .rxChannelBitMask   = 1<<UDMA_CHAN_SSI1_RX,
-        .txChannelBitMask   = 1<<UDMA_CHAN_SSI1_TX,
-        .mosiPin            = Board_SPI1_MOSI,
-        .misoPin            = Board_SPI1_MISO,
-        .clkPin             = Board_SPI1_CLK,
-        .csnPin             = Board_SPI1_CS
-    },
-};
-
-/* SPI configuration structure */
-const SPI_Config SPI_config[] = {
-    {
-         .fxnTablePtr = &SPICC26XXDMA_fxnTable,
-         .object      = &spiCC26XXDMAObjects[0],
-         .hwAttrs     = &spiCC26XXDMAHWAttrs[0]
-    },
-    {
-         .fxnTablePtr = &SPICC26XXDMA_fxnTable,
-         .object      = &spiCC26XXDMAObjects[1],
-         .hwAttrs     = &spiCC26XXDMAHWAttrs[1]
-    },
-    {NULL, NULL, NULL}
-};
-/*
- *  ========================== SPI DMA end =====================================
-*/
-
-
-/*
- *  ============================= I2C Begin=====================================
-*/
-
-#ifdef ELITE_VERSION_1_4
-
-/* Generic I2C instance identifiers */
-#define Board_I2C                   CC2650_MA_I2C0
-/*!
- *  @def    CC2650_LAUNCHXL_I2CName
- *  @brief  Enum of I2C names on the CC2650 dev board
- */
-typedef enum CC2650_MA_I2CName {
-    CC2650_MA_I2C0 = 0,
-
-    CC2650_MA_I2CCOUNT
-} CC2650_MA_I2CName;
-
-/* Place into subsections to allow the TI linker to remove items properly */
-#if defined(__TI_COMPILER_VERSION__)
-#pragma DATA_SECTION(I2C_config, ".const:I2C_config")
-#pragma DATA_SECTION(i2cCC26xxHWAttrs, ".const:i2cCC26xxHWAttrs")
-#endif
-
-/* Include drivers */
-#include <ti/drivers/i2c/I2CCC26XX.h>
-
-/* I2C objects */
-I2CCC26XX_Object i2cCC26xxObjects[CC2650_MA_I2CCOUNT];
-
-/* I2C configuration structure, describing which pins are to be used */
-const I2CCC26XX_HWAttrsV1 i2cCC26xxHWAttrs[CC2650_MA_I2CCOUNT] = {
-    {
-        .baseAddr = I2C0_BASE,
-        .powerMngrId = PowerCC26XX_PERIPH_I2C0,
-        .intNum = INT_I2C_IRQ,
-        .intPriority = ~0,
-        .swiPriority = 0,
-        .sdaPin = Board_I2C0_SDA0,
-        .sclPin = Board_I2C0_SCL0,
-    }
-};
-
-/* I2C configuration structure */
-const I2C_Config I2C_config[] = {
-    {
-        .fxnTablePtr = &I2CCC26XX_fxnTable,
-        .object = &i2cCC26xxObjects[0],
-        .hwAttrs = &i2cCC26xxHWAttrs[0]
-    },
-    {NULL, NULL, NULL}
-};
-/*
- *  ========================== I2C end =========================================
- */
-#endif
-
-#endif
-

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_batt.h

@@ -1,92 +0,0 @@
-/*
-***********************************************************
-    Read battery's method
-***********************************************************
-1.ReadADCBat(spi_ADC_rxbuf)
-  let "spi_ADC_rxbuf" be 8000
-  8000 * 187.5uV * 2 = 3000000uV = 3V ;
-2.AONBatMonBatteryVoltageGet()
-  let "AONBatMonBatteryVoltageGet()" be 768
-  768 * 125 / 320 / 100 = 768 / 256 = 3V ;
-
-if you want to use first method, and get value 768
-conversion: 8000 * 187.5 * 1e-6 * 2 / 125 * 320 * 100 = 768
-         => 8000 * 12 / 125 = 768
-*/
-
-#ifndef HEADSTAGE_BATT_H
-#define HEADSTAGE_BATT_H
-
-#include <driverlib/aon_batmon.h>
-#define MAX_BATTERY_CAPACITY 4200
-
-static uint8_t headstage_battery_percent() {
-    static uint8_t battery_percent = 100;
-    uint8_t  internal_battery_percent;
-    uint32_t internal_batt_sense = AONBatMonBatteryVoltageGet();
-    internal_batt_sense          = (internal_batt_sense * 125) >> 5;
-    internal_batt_sense          = (internal_batt_sense * 100) / MAX_BATTERY_CAPACITY;
-    internal_battery_percent     = internal_batt_sense & 0xFF;
-    if (internal_battery_percent < battery_percent) battery_percent = internal_battery_percent;
-    return battery_percent;
-}
-
-static void headstage_battery_volt(){
-    uint32_t bat_volt = 0;
-
-    ReadADCBat(spi_ADC_rxbuf);
-    bat_volt = (uint32_t) (spi_ADC_rxbuf[0] << 8) | (uint32_t) (spi_ADC_rxbuf[1]);
-    bat_volt = bat_volt * 12 / 125; //x  * 187.5 * 1e-6 * 2 / 125 * 320 * 100 ;
-    InputNotify(NOTIFY_VOLT_BAT, bat_volt);
-}
-
-static void EliteADCBattery(){
-    static uint8_t ADCSwitch = 0;
-    if(INSTRUCTION.eliteFxn == ADC_TEST){
-        ADCSwitch = 0;
-    }else{
-        if(ADCSwitch == 0){ /**read V**/
-            ReadADCBat(spi_ADC_rxbuf);
-            ADCSwitch++;
-        }
-        else if(ADCSwitch == 1){ /**read V**/
-            ReadADCBat(spi_ADC_rxbuf);
-            ADCSwitch++;
-        }
-        else if(ADCSwitch == 2){ /**read V(buffer)**/
-            headstage_battery_volt();
-            batteryCheck_flag = false;
-            ADCSwitch = 0;
-        }
-    }
-}
-
-static void measureBat(){
-    GPT.DeltaGptimerCounter = GPT.GptimerCounter - GPT.GptimerCounter0;
-    GPT.GptimerCounter0 = GPT.GptimerCounter;
-
-    GPT.BatteryADCCounter = GPT.BatteryADCCounter + GPT.DeltaGptimerCounter;
-    GPT.BatteryCheckCounter = GPT.BatteryCheckCounter + GPT.DeltaGptimerCounter;
-
-    if(GPT.BatteryCheckCounter >= 50000){//5min=3000000, 5s=50000
-        GPT.BatteryCheckCounter = 0;
-        batteryCheck_flag = true;
-    }
-
-    if(GPT.BatteryADCCounter >= 15 && batteryCheck_flag){
-        GPT.BatteryADCCounter = 0; //To get the data right, ADC must be delay 1.5ms
-        batteryADC_flag = true;
-        if(batteryADC_flag){
-            EliteADCBattery();
-            batteryADC_flag = false;
-        }
-    }
-
-    uint16_t bat = ((uint16_t)(NotifyVoltBat[2]) << 8 & 0xFF00 ) |
-                   ((uint16_t)(NotifyVoltBat[3]) & 0x00FF);
-    if( bat < 768 && bat > 20){
-        PIN15_setOutputValue(enable_5v, 0);
-    }
-}
-
-#endif  // HEADSTAGE_BATT_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_def.h

@@ -1,100 +0,0 @@
-#ifndef ELITE_DEF
-#define ELITE_DEF
-
-// define BT instruction
-#define INS_TYPE_RIS                    0x30
-#define INS_TYPE_VIS                    0xC0
-#define INS_TYPE_CIS                    0x70
-
-// VIS (virtual instruction)
-#define VIS_RST                         0xF0
-#define VIS_ASK                         0x30
-#define VIS_STI                         0xC0
-#define VIS_FUH                         0x90
-#define VIS_INT                         0x60
-#define VIS_SHIFT_200K                  0xA0
-#define VIS_SHIFT_10K                   0xE0
-#define VIS_SHIFT_200R                  0x80
-#define VIS_DEVICE_SHINY                0x10
-#define VIS_SHINY_DIS                   0x20
-#define VIS_CC_ZERO                     0x40
-
-// RIS (real instruction)
-#define IV_CURVE                        0x10
-#define CV_CURVE                        0x20
-#define VOLT_OUTPUT                     0x30
-#define ZT_CURVE                        0x40
-#define VT_CURVE                        0x50
-#define IT_CURVE                        0x60
-#define SET_SAMPLE_RATE                 0x70
-#define SET_ADC_DAC_GAIN                    0x80
-#define DIFFERENTIAL_PULSE_VOLTAMMETRY  0xA0
-#define SQUARE_WAVE_VOLTAMMETRY         0xB0
-#define CYCLIC_VOLTAMMETRY              0xC0
-#define CONSTANT_CURRENT                0xD0
-#define CYCLE_CONSTANT_CURRENT          0xF0
-#define HIGH_CYCLE_CYCLIC_VOLTAMMETRY   0x01
-#define LINEAR_SWEEP_VOLTAMMETRY        0x02
-#define CONSTANT_VSCAN                  0x03
-#define ADC_TEST                        0x91
-#define CALI_DAC_MODE                   0x93
-#define CALI_ADC_MODE                   0x92
-#define PULSE_MODE                      0x94
-
-// CIS (control instruction)
-#define CIS_VERSION                     0x40
-#define CIS_VOLT                        0x10
-#define CIS_LED_TEST                    0x70
-
-// mode parameter
-#define STEP_TO_VSETRATE(step)   step2VsetRate(step)
-#define VMAX(v1,v2)              ((v1 >= v2) ? v1 : v2)
-#define VMIN(v1,v2)              ((v1 < v2)  ? v1 : v2)
-#define VDIRECTION(v1,v2)        ((v1 > v2)  ?  0 : 1)
-#define AFTER_READ_I             0
-#define AFTER_READ_V             1
-#define ReadADCVolt(x)           ((x==0)? ReadADCVout(spi_ADC_rxbuf) : ReadADCVin(spi_ADC_rxbuf))
-#define PARA_1                   0x01
-#define PARA_2                   0x02
-#define PARA_3                   0x03
-#define PARA_4                   0x04
-#define PARA_5                   0x05
-#define PARA_6                   0x06
-#define PARA_7                   0x07
-#define PARA_8                   0x08
-#define PARA_9                   0x09
-#define PARA_10                  0x0A
-#define PARA_11                  0x0B
-#define PARA_12                  0x0C
-#define PARA_13                  0x0D
-#define PARA_14                  0x0E
-#define PARA_15                  0x0F
-#define PARA_16                  0x10
-#define PARA_17                  0x11
-
-//Elite LED
-#define COLOR_BLACK              0x00
-#define COLOR_RED                0x01
-#define COLOR_ORANGE             0x02
-#define COLOR_YELLOW             0x03
-#define COLOR_GREEN              0x04
-#define COLOR_BLUE               0x05
-#define COLOR_CYAN               0x06
-#define COLOR_MAGENTA            0x07
-#define COLOR_PURPLE             0x08
-#define COLOR_WHITE              0x09
-#define COLOR_YELLOWGREEN        0x0A
-#define LEDPowerON()             Elite_led_color(COLOR_GREEN)
-#define WORKLED()                Elite_led_color(COLOR_CYAN)
-#define KEYLED()                 Elite_led_color(COLOR_YELLOW)
-#define BT_WAIT_LED()            Elite_led_color(COLOR_YELLOWGREEN)
-
-
-#define BT_WAIT                  0x01
-#define NO_EVENT                 0x02
-#define PRE_WORK                 0x03
-#define WORKING                  0x04
-#define POST_WORK                0x05
-
-#define VALUE_ZERO_TO_ONE(_v)    (_v == 0) ? 1 : _v
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_mode_ADC_DAC.h

@@ -1,804 +0,0 @@
-#ifndef ELITE_MODE_ADC_DAC
-#define ELITE_MODE_ADC_DAC
-
-#define Vset INSTRUCTION.Vset
-
-static void readIin(WorkMode *WorkModeData);
-static int32_t readVinVout(WorkMode *WorkModeData);
-
-static uint16_t OneWayVoltScan() {
-    static uint16_t DACOutCode;
-    static int32_t Vout;
-    static int32_t DeltaVout;
-
-    if(DACReset){
-        Vout = Vset;
-        DACReset = false;
-    }else{
-        DeltaVout = Vset - (Vout);
-        Vout = Vout + DeltaVout;
-    }
-
-    INSTRUCTION.VoltConstant = Vout / 40000 + 25000; //5nV=>usercode
-    DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, INSTRUCTION.VoltConstant);
-    DAC_outputV(DACOutCode);
-
-    if ((INSTRUCTION.eliteFxn == IV_CURVE)||(INSTRUCTION.eliteFxn == CV_CURVE)||(INSTRUCTION.eliteFxn == CONSTANT_CURRENT)){
-        int32_t RealV;
-        RealV = (int32_t)(Vout / 200);//[1uV]
-        InputNotify(NOTIFY_IMPEDANCE, RealV);
-    }
-
-
-    return DACOutCode;
-}
-
-static void CalcuResistance(RTMode *RT, int32_t VoltData){
-    /* Elite 100 = 100R
-       Elite 1000 = 1KR
-       Elite 10000 = 10KR
-       Elite 100000 = 100KR
-       Elite 1000000 = 1MR
-    */
-    static int32_t resister_32 = 0;
-    int32_t Vtemp;
-    Vtemp = (VoltData * 1000) - (RT->_measureCurrent * 10); //V = Vin - Iin * 10
-    resister_32 = Vtemp / RT->_measureCurrent; //R = V / Iin;
-    InputNotify(NOTIFY_IMPEDANCE, resister_32);
-}
-
-static void DACenable(WorkMode *WorkModeData, int32_t VoltData ,uint8_t afterRead){
-    if(afterRead == AFTER_READ_I){
-        switch (INSTRUCTION.eliteFxn) {
-            case CONSTANT_CURRENT:{
-                CC_Vscan(WorkModeData->CC);
-                OneWayVoltScan();
-                break;
-            }
-            case IV_CURVE:
-            case CV_CURVE:
-            case ZT_CURVE:
-            case IT_CURVE:
-            case VT_CURVE:
-            case CYCLIC_VOLTAMMETRY:
-            case LINEAR_SWEEP_VOLTAMMETRY:
-            case CONSTANT_VSCAN:
-            case PULSE_MODE:{
-                break;
-            }
-            default:{
-                break;
-            }
-        }
-    }else if(afterRead == AFTER_READ_V){
-        switch (INSTRUCTION.eliteFxn) {
-            case IV_CURVE:
-            case CV_CURVE:{
-                OneWayVoltScan();
-                break;
-            }
-            case ZT_CURVE:{
-                CalcuResistance(WorkModeData->RT, VoltData);
-            break;
-            }
-            case IT_CURVE:
-            case VT_CURVE:
-            case CONSTANT_CURRENT:
-            case PULSE_MODE:{
-                break;
-            }
-            case CYCLIC_VOLTAMMETRY:{
-                CV3Curve(WorkModeData->CV3);
-                break;
-            }
-            case LINEAR_SWEEP_VOLTAMMETRY:{
-                LSVCurve(WorkModeData->LSV);
-                break;
-            }
-            case CONSTANT_VSCAN:{
-                CVSCANCurve(WorkModeData->CVSCAN);
-                break;
-            }
-            default:{
-                break;
-            }
-        }
-    }
-}
-
-static void CC_Plot(WorkMode *WorkModeData){
-    switch (INSTRUCTION.eliteFxn) {
-        case IT_CURVE:{
-            #define CURRENT_MODE WorkModeData->IT
-            break;
-        }
-        case VT_CURVE:{
-            #define CURRENT_MODE WorkModeData->VT
-            break;
-        }
-        case ZT_CURVE:{
-            #define CURRENT_MODE WorkModeData->RT
-            break;
-        }
-        case IV_CURVE:{
-            #define CURRENT_MODE WorkModeData->IV
-            break;
-        }
-        case CV_CURVE:{
-            #define CURRENT_MODE WorkModeData->CV
-            break;
-        }
-        case CONSTANT_CURRENT:{
-            #define CURRENT_MODE WorkModeData->CC
-            break;
-        }
-        case CYCLIC_VOLTAMMETRY:{
-            #define CURRENT_MODE WorkModeData->CV3
-            break;
-        }
-        case LINEAR_SWEEP_VOLTAMMETRY:{
-            #define CURRENT_MODE WorkModeData->LSV
-            break;
-        }
-        case CONSTANT_VSCAN:{
-            #define CURRENT_MODE WorkModeData->CVSCAN
-            break;
-        }
-        case PULSE_MODE:{
-            #define CURRENT_MODE WorkModeData->PULSE
-            break;
-        }
-        default: {
-            break;
-        }
-    }
-
-    static uint8_t ADCSwitch = 0;
-    static uint8_t BatSwitch = 0;
-    static int32_t VoltData  = 0;
-
-    if(batteryCheck_flag){
-        if(BatSwitch == 0){
-            if(ADCSwitch == 0){ /**read Iin(buffer),read bat**/
-                readIin(WorkModeData);
-                if(record_flag == false){
-                    static int recordCount = 0;
-                    recordCount++;
-                    if(recordCount == 2){
-                        record_flag = true;
-                        recordCount = 0;
-                    }
-                }else{
-                    InputNotify(NOTIFY_CURRENT, CURRENT_MODE->_measureCurrent);
-                }
-                DACenable(WorkModeData, VoltData, AFTER_READ_I);
-
-                ReadADCBat(spi_ADC_rxbuf);
-                BatSwitch++;
-            }else if(ADCSwitch == 1 || ADCSwitch == 3){ /**read Bat**/
-                ReadADCBat(spi_ADC_rxbuf);
-                BatSwitch++;
-            }else if(ADCSwitch == 2){ /**read V(buffer),read bat**/
-                VoltData = readVinVout(WorkModeData);
-                if(INSTRUCTION.VoViSwitch == 0x02){
-                    int32_t Vscan = (Vset / 200 - CURRENT_MODE->_measureVin);
-                    Vscan = (int32_t)(Vscan);//[1uV]
-                    InputNotify(NOTIFY_VOLT, Vscan);
-                }else{
-                    InputNotify(NOTIFY_VOLT, VoltData);
-                }
-                DACenable(WorkModeData, VoltData, AFTER_READ_V);
-
-                ReadADCBat(spi_ADC_rxbuf);
-                BatSwitch++;
-            }
-        }else if(BatSwitch == 1){
-            ReadADCBat(spi_ADC_rxbuf);
-            BatSwitch++;
-        }else if(BatSwitch == 2){
-            headstage_battery_volt();
-            ReadADCIin(spi_ADC_rxbuf);
-            batteryCheck_flag = false;
-            BatSwitch = 0;
-            ADCSwitch = 3;
-        }
-    }else{
-        BatSwitch = 0;
-        if(ADCSwitch == 0){ /**read Iin(buffer),read V**/
-            readIin(WorkModeData);
-            if(record_flag == false){
-                static int recordCount = 0;
-                recordCount++;
-                if(recordCount == 2){
-                    record_flag = true;
-                    recordCount = 0;
-                }
-            }else{
-                InputNotify(NOTIFY_CURRENT, CURRENT_MODE->_measureCurrent);
-            }
-            DACenable(WorkModeData, VoltData, AFTER_READ_I);
-
-            ReadADCVolt(CURRENT_MODE->_VoViSwitch);
-            ADCSwitch++;
-        }
-        else if(ADCSwitch == 1){ /**read V**/
-            ReadADCVolt(CURRENT_MODE->_VoViSwitch);
-            ADCSwitch++;
-        }
-        else if(ADCSwitch == 2){ /**read V(buffer),read Iin**/
-            VoltData = readVinVout(WorkModeData);
-            if(INSTRUCTION.VoViSwitch == 0x02){
-                int32_t Vscan = (Vset / 200 - CURRENT_MODE->_measureVin);
-                Vscan = (int32_t)(Vscan);//[1uV]
-                InputNotify(NOTIFY_VOLT, Vscan);
-            }else{
-                InputNotify(NOTIFY_VOLT, VoltData);
-            }
-            DACenable(WorkModeData, VoltData, AFTER_READ_V);
-
-            ReadADCIin(spi_ADC_rxbuf);
-            ADCSwitch++;
-        }
-        else if(ADCSwitch == 3){ /**read Iin**/
-            ReadADCIin(spi_ADC_rxbuf);
-            ADCSwitch = 0;
-        }
-    }
-    #undef CURRENT_MODE
-}
-
-static void IT_Plot(WorkMode *WorkModeData) {
-    switch (INSTRUCTION.eliteFxn) {
-        case IT_CURVE:{
-            #define CURRENT_MODE WorkModeData->IT
-            break;
-        }
-        case VT_CURVE:{
-            #define CURRENT_MODE WorkModeData->VT
-            break;
-        }
-        case ZT_CURVE:{
-            #define CURRENT_MODE WorkModeData->RT
-            break;
-        }
-        case IV_CURVE:{
-            #define CURRENT_MODE WorkModeData->IV
-            break;
-        }
-        case CV_CURVE:{
-            #define CURRENT_MODE WorkModeData->CV
-            break;
-        }
-        case CONSTANT_CURRENT:{
-            #define CURRENT_MODE WorkModeData->CC
-            break;
-        }
-        case CYCLIC_VOLTAMMETRY:{
-            #define CURRENT_MODE WorkModeData->CV3
-            break;
-        }
-        case LINEAR_SWEEP_VOLTAMMETRY:{
-            #define CURRENT_MODE WorkModeData->LSV
-            break;
-        }
-        case CONSTANT_VSCAN:{
-            #define CURRENT_MODE WorkModeData->CVSCAN
-            break;
-        }
-        case PULSE_MODE:{
-            #define CURRENT_MODE WorkModeData->PULSE
-            break;
-        }
-        default: {
-            break;
-        }
-    }
-
-    static uint8_t ADCSwitch = 0;
-
-    if(batteryCheck_flag){
-        EliteADCBattery();
-        if(!batteryCheck_flag){
-            ReadADCIin(spi_ADC_rxbuf);
-            ADCSwitch = 2;
-        }
-    }else{
-        if(ADCSwitch == 0){ /**read Iin(buffer)**/
-            readIin(WorkModeData);
-            if(record_flag == false){
-                static int recordCount = 0;
-                recordCount++;
-                if(recordCount == 2){
-                    record_flag = true;
-                    recordCount = 0;
-                }
-            }else{
-                InputNotify(NOTIFY_CURRENT, CURRENT_MODE->_measureCurrent);
-            }
-            ADCSwitch++;
-        }
-        else if(ADCSwitch == 1){ /**read Iin**/
-            ReadADCIin(spi_ADC_rxbuf);
-            ADCSwitch++;
-        }
-        else if(ADCSwitch == 2){ /**read Iin**/
-            ReadADCIin(spi_ADC_rxbuf);
-            ADCSwitch = 0;
-        }
-    }
-    #undef CURRENT_MODE
-}
-
-static void VT_Plot(WorkMode *WorkModeData) {
-    switch (INSTRUCTION.eliteFxn) {
-        case IT_CURVE:{
-            #define CURRENT_MODE WorkModeData->IT
-            break;
-        }
-        case VT_CURVE:{
-            #define CURRENT_MODE WorkModeData->VT
-            break;
-        }
-        case ZT_CURVE:{
-            #define CURRENT_MODE WorkModeData->RT
-            break;
-        }
-        case IV_CURVE:{
-            #define CURRENT_MODE WorkModeData->IV
-            break;
-        }
-        case CV_CURVE:{
-            #define CURRENT_MODE WorkModeData->CV
-            break;
-        }
-        case CONSTANT_CURRENT:{
-            #define CURRENT_MODE WorkModeData->CC
-            break;
-        }
-        case CYCLIC_VOLTAMMETRY:{
-            #define CURRENT_MODE WorkModeData->CV3
-            break;
-        }
-        case LINEAR_SWEEP_VOLTAMMETRY:{
-            #define CURRENT_MODE WorkModeData->LSV
-            break;
-        }
-        case CONSTANT_VSCAN:{
-            #define CURRENT_MODE WorkModeData->CVSCAN
-            break;
-        }
-        case PULSE_MODE:{
-            #define CURRENT_MODE WorkModeData->PULSE
-            break;
-        }
-        default: {
-            break;
-        }
-    }
-
-    // ADC gain is don't care when measuring voltage
-//    INSTRUCTION.ADCGainLevel = I_GAIN_100R;
-//    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-
-    static uint8_t ADCSwitch = 0;
-    static int32_t VoltData;
-
-    if(batteryCheck_flag){
-        EliteADCBattery();
-        if(!batteryCheck_flag){
-            ReadADCVolt(CURRENT_MODE->_VoViSwitch);
-            ADCSwitch = 2;
-        }
-    }else{
-        if(ADCSwitch == 0){ /**read V(buffer)**/
-            VoltData = readVinVout(WorkModeData);
-            if(record_flag == false){
-                static int recordCount = 0;
-                recordCount++;
-                if(recordCount == 2){
-                    record_flag = true;
-                    recordCount = 0;
-                }
-            }else{
-                InputNotify(NOTIFY_VOLT, VoltData);
-            }
-            ADCSwitch++;
-        }
-        else if(ADCSwitch == 1){ /**read V**/
-            ReadADCVolt(CURRENT_MODE->_VoViSwitch);
-            ADCSwitch++;
-        }
-        else if(ADCSwitch == 2){ /**read V**/
-            ReadADCVolt(CURRENT_MODE->_VoViSwitch);
-            ADCSwitch = 0;
-        }
-    }
-    #undef CURRENT_MODE
-}
-
-static void readIin(WorkMode *WorkModeData){
-    switch (INSTRUCTION.eliteFxn) {
-        case IT_CURVE:{
-            #define TEMP_MODE WorkModeData->IT
-            break;
-        }
-        case VT_CURVE:{
-            #define TEMP_MODE WorkModeData->VT
-            break;
-        }
-        case ZT_CURVE:{
-            #define TEMP_MODE WorkModeData->RT
-            break;
-        }
-        case IV_CURVE:{
-            #define TEMP_MODE WorkModeData->IV
-            break;
-        }
-        case CV_CURVE:{
-            #define TEMP_MODE WorkModeData->CV
-            break;
-        }
-        case CONSTANT_CURRENT:{
-            #define TEMP_MODE WorkModeData->CC
-            break;
-        }
-        case CYCLIC_VOLTAMMETRY:{
-            #define TEMP_MODE WorkModeData->CV3
-            break;
-        }
-        case LINEAR_SWEEP_VOLTAMMETRY:{
-            #define TEMP_MODE WorkModeData->LSV
-            break;
-        }
-        case CONSTANT_VSCAN:{
-            #define TEMP_MODE WorkModeData->CVSCAN
-            break;
-        }
-        case PULSE_MODE:{
-            #define TEMP_MODE WorkModeData->PULSE
-            break;
-        }
-        default: {
-            break;
-        }
-    }
-
-    if(INSTRUCTION.AutoGainEnable){
-        TEMP_MODE->_measureCurrent = AutoGainReadIin(spi_ADC_rxbuf);
-        AutoGainChangeIin(TEMP_MODE->_measureCurrent);
-    }else{
-        ReadADCIin(spi_ADC_rxbuf);
-        TEMP_MODE->_measureCurrent = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
-        if(lastIinADCGainLevel != INSTRUCTION.ADCGainLevel){
-            IinADCGainControl(INSTRUCTION.ADCGainLevel);
-            record_flag = false;
-        }
-    }
-    #undef TEMP_MODE
-}
-
-static int32_t readVinVout(WorkMode *WorkModeData){
-    switch (INSTRUCTION.eliteFxn) {
-        case IT_CURVE:{
-            #define TEMP_MODE WorkModeData->IT
-            break;
-        }
-        case VT_CURVE:{
-            #define TEMP_MODE WorkModeData->VT
-            break;
-        }
-        case ZT_CURVE:{
-            #define TEMP_MODE WorkModeData->RT
-            break;
-        }
-        case IV_CURVE:{
-            #define TEMP_MODE WorkModeData->IV
-            break;
-        }
-        case CV_CURVE:{
-            #define TEMP_MODE WorkModeData->CV
-            break;
-        }
-        case CONSTANT_CURRENT:{
-            #define TEMP_MODE WorkModeData->CC
-            break;
-        }
-        case CYCLIC_VOLTAMMETRY:{
-            #define TEMP_MODE WorkModeData->CV3
-            break;
-        }
-        case LINEAR_SWEEP_VOLTAMMETRY:{
-            #define TEMP_MODE WorkModeData->LSV
-            break;
-        }
-        case CONSTANT_VSCAN:{
-            #define TEMP_MODE WorkModeData->CVSCAN
-            break;
-        }
-        case PULSE_MODE:{
-            #define TEMP_MODE WorkModeData->PULSE
-            break;
-        }
-        default: {
-            break;
-        }
-    }
-
-    static int32_t VoltData;
-
-    if(TEMP_MODE->_VoViSwitch == 0x01 || TEMP_MODE->_VoViSwitch == 0x02){
-        if(INSTRUCTION.VinAutoGainEnable){
-            TEMP_MODE->_measureVin = AutoGainReadVin(spi_ADC_rxbuf);
-            AutoGainChangeVin(TEMP_MODE->_measureVin);
-        }else{
-            ReadADCVolt(TEMP_MODE->_VoViSwitch);
-            TEMP_MODE->_measureVin = DecodeADCValue(INSTRUCTION.VinADCGainLevel, ADC_CH_VOLT, spi_ADC_rxbuf);
-            if(lastVinADCGainLevel != INSTRUCTION.VinADCGainLevel){
-                VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-                record_flag = false;
-            }
-
-        }
-        VoltData = TEMP_MODE->_measureVin;
-    }else if(TEMP_MODE->_VoViSwitch == 0x00){
-        ReadADCVolt(TEMP_MODE->_VoViSwitch);
-        TEMP_MODE->_measureVout = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_DAC, spi_ADC_rxbuf);
-        VoltData = TEMP_MODE->_measureVout;
-    }
-    #undef TEMP_MODE
-    return VoltData;
-}
-
-static void cali_IT_plot(WorkMode *WorkModeData)
-{
-    switch (INSTRUCTION.eliteFxn) {
-        case IT_CURVE:{
-            #define CURRENT_MODE WorkModeData->IT
-            break;
-        }
-        case VT_CURVE:{
-            #define CURRENT_MODE WorkModeData->VT
-            break;
-        }
-        case ZT_CURVE:{
-            #define CURRENT_MODE WorkModeData->RT
-            break;
-        }
-        case IV_CURVE:{
-            #define CURRENT_MODE WorkModeData->IV
-            break;
-        }
-        case CV_CURVE:{
-            #define CURRENT_MODE WorkModeData->CV
-            break;
-        }
-        case CONSTANT_CURRENT:{
-            #define CURRENT_MODE WorkModeData->CC
-            break;
-        }
-        case CYCLIC_VOLTAMMETRY:{
-            #define CURRENT_MODE WorkModeData->CV3
-            break;
-        }
-        case LINEAR_SWEEP_VOLTAMMETRY:{
-            #define CURRENT_MODE WorkModeData->LSV
-            break;
-        }
-        case CONSTANT_VSCAN:{
-            #define CURRENT_MODE WorkModeData->CVSCAN
-            break;
-        }
-        case PULSE_MODE:{
-            #define CURRENT_MODE WorkModeData->PULSE
-            break;
-        }
-        default: {
-            #define CURRENT_MODE WorkModeData->VT
-            break;
-        }
-    }
-
-    static uint8_t ADCSwitch = 0;
-    static int32_t ADCValueSUM     = 0;
-    int32_t ADCValueAVG            = 0;
-    static uint16_t cali_count_max = 1000;
-
-    if(ADCSwitch == 0){ /**read Iin(buffer)**/
-        if(INSTRUCTION.AutoGainEnable){
-            CURRENT_MODE->_measureCurrent = 0xFFFF;
-        }else{
-            ReadADCIin(spi_ADC_rxbuf);
-            CURRENT_MODE->_measureCurrent = (int32_t) (spi_ADC_rxbuf[0] << 8) | (int32_t) (spi_ADC_rxbuf[1]);
-            if(lastIinADCGainLevel != INSTRUCTION.ADCGainLevel){
-                IinADCGainControl(INSTRUCTION.ADCGainLevel);
-                record_flag = false;
-            }
-        }
-        if(INSTRUCTION.ADCGainLevel == 0) {
-            cali_count_max = 5000;
-        } else {
-            cali_count_max = 1000;
-        }
-
-        if(record_flag == false){
-            static int recordCount = 0;
-            recordCount++;
-            if(recordCount == 2){
-                record_flag = true;
-                recordCount = 0;
-            }
-        }else{
-            static uint16_t cali_count = 0;
-            if(cali_count >= cali_count_max){
-                ADCValueAVG = ADCValueSUM / cali_count;
-
-                InputNotify(NOTIFY_CURRENT, ADCValueAVG);
-                SendNotify();
-
-                uint8_t CIS_buf[9]   = {0};
-                CIS_buf[0] = INSTRUCTION.chip_id;
-                CIS_buf[1] = (uint8_t) ((ADCValueAVG & 0xFF00) >> 8);
-                CIS_buf[2] = (uint8_t) (ADCValueAVG & 0x00FF);
-                CIS_buf[3] = 0x00;
-                CIS_buf[4] = INSTRUCTION.ADCGainLevel;
-                SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, 9, CIS_buf);
-                ADCValueSUM = 0;
-                cali_count = 0;
-
-                PeriodicEvent = false;
-                ModeLED(NO_EVENT);
-            }else{
-                cali_count++;
-                ADCValueSUM = ADCValueSUM + CURRENT_MODE->_measureCurrent;
-                InputNotify(NOTIFY_CURRENT, CURRENT_MODE->_measureCurrent);
-                InputNotify(NOTIFY_VOLT, ADCValueSUM);
-                InputNotify(NOTIFY_IMPEDANCE, (int32_t)cali_count);
-            }
-
-        }
-        ADCSwitch++;
-    }
-    else if(ADCSwitch == 1){ /**read Iin**/
-        ReadADCIin(spi_ADC_rxbuf);
-        ADCSwitch++;
-    }
-    else if(ADCSwitch == 2){ /**read Iin**/
-        ReadADCIin(spi_ADC_rxbuf);
-        ADCSwitch = 0;
-    }
-
-    #undef CURRENT_MODE
-}
-
-static void cali_VT_plot(WorkMode *WorkModeData) {
-    switch (INSTRUCTION.eliteFxn) {
-        case IT_CURVE:{
-            #define CURRENT_MODE WorkModeData->IT
-            break;
-        }
-        case VT_CURVE:{
-            #define CURRENT_MODE WorkModeData->VT
-            break;
-        }
-        case ZT_CURVE:{
-            #define CURRENT_MODE WorkModeData->RT
-            break;
-        }
-        case IV_CURVE:{
-            #define CURRENT_MODE WorkModeData->IV
-            break;
-        }
-        case CV_CURVE:{
-            #define CURRENT_MODE WorkModeData->CV
-            break;
-        }
-        case CONSTANT_CURRENT:{
-            #define CURRENT_MODE WorkModeData->CC
-            break;
-        }
-        case CYCLIC_VOLTAMMETRY:{
-            #define CURRENT_MODE WorkModeData->CV3
-            break;
-        }
-        case LINEAR_SWEEP_VOLTAMMETRY:{
-            #define CURRENT_MODE WorkModeData->LSV
-            break;
-        }
-        case CONSTANT_VSCAN:{
-            #define CURRENT_MODE WorkModeData->CVSCAN
-            break;
-        }
-        case PULSE_MODE:{
-            #define CURRENT_MODE WorkModeData->PULSE
-            break;
-        }
-        default: {
-            #define CURRENT_MODE WorkModeData->VT
-            break;
-        }
-    }
-
-    static uint8_t ADCSwitch = 0;
-    static int32_t VoltData;
-    static int32_t ADCValueSUM     = 0;
-    int32_t ADCValueAVG            = 0;
-    static uint16_t cali_count_max = 1000;
-
-    if(ADCSwitch == 0){ /**read Iin(buffer)**/
-        if(CURRENT_MODE->_VoViSwitch == 0x01 || CURRENT_MODE->_VoViSwitch == 0x02){
-            if(INSTRUCTION.VinAutoGainEnable){
-                CURRENT_MODE->_measureVin = 0xFFFF;
-            }else{
-                ReadADCVolt(CURRENT_MODE->_VoViSwitch);
-                CURRENT_MODE->_measureVin = (int32_t) (spi_ADC_rxbuf[0] << 8) | (int32_t) (spi_ADC_rxbuf[1]);
-                if(lastVinADCGainLevel != INSTRUCTION.VinADCGainLevel){
-                    VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-                    record_flag = false;
-                }
-
-            }
-            VoltData = CURRENT_MODE->_measureVin;
-        } else if(CURRENT_MODE->_VoViSwitch == 0x00) {
-            ReadADCVolt(CURRENT_MODE->_VoViSwitch);
-//            CURRENT_MODE->_measureVout = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_DAC, spi_ADC_rxbuf);
-            CURRENT_MODE->_measureVin = (int32_t) (spi_ADC_rxbuf[0] << 8) | (int32_t) (spi_ADC_rxbuf[1]);
-            VoltData = CURRENT_MODE->_measureVout;
-        }
-
-        if((INSTRUCTION.VinADCGainLevel == 0) && !(CURRENT_MODE->_VoViSwitch == 0x00)) {
-            cali_count_max = 5000;
-        } else {
-            cali_count_max = 1000;
-        }
-
-        if(record_flag == false){
-            static int recordCount = 0;
-            recordCount++;
-            if(recordCount == 2){
-                record_flag = true;
-                recordCount = 0;
-            }
-        }else{
-            static uint16_t cali_count = 0;
-            if(cali_count >= cali_count_max){
-                ADCValueAVG = ADCValueSUM / cali_count;
-
-                InputNotify(NOTIFY_VOLT, ADCValueAVG);
-                SendNotify();
-
-                uint8_t CIS_buf[9]   = {0};
-                CIS_buf[0] = INSTRUCTION.chip_id;
-                CIS_buf[1] = (uint8_t) ((ADCValueAVG & 0xFF00) >> 8);
-                CIS_buf[2] = (uint8_t) (ADCValueAVG & 0x00FF);
-                CIS_buf[3] = 0x00;
-                CIS_buf[4] = INSTRUCTION.VinADCGainLevel;
-                SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, 9, CIS_buf);
-                ADCValueSUM = 0;
-                cali_count = 0;
-
-                PeriodicEvent = false;
-                ModeLED(NO_EVENT);
-            }else{
-                cali_count++;
-                ADCValueSUM = ADCValueSUM + CURRENT_MODE->_measureVin;
-                InputNotify(NOTIFY_VOLT, CURRENT_MODE->_measureVin);
-                InputNotify(NOTIFY_CURRENT, ADCValueSUM);
-                InputNotify(NOTIFY_IMPEDANCE, (int32_t)cali_count);
-            }
-
-        }
-        ADCSwitch++;
-    }
-    else if(ADCSwitch == 1){ /**read v**/
-        ReadADCVolt(CURRENT_MODE->_VoViSwitch);
-        ADCSwitch++;
-    }
-    else if(ADCSwitch == 2){ /**read v**/
-        ReadADCVolt(CURRENT_MODE->_VoViSwitch);
-        ADCSwitch = 0;
-    }
-
-    #undef CURRENT_MODE
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_power.h

@@ -1,9 +0,0 @@
-#ifndef HEADSTAGE_POWER_H
-#define HEADSTAGE_POWER_H
-
-#include <ti/drivers/Power.h>
-#include <ti/drivers/power/PowerCC26XX.h>
-
-#define headstage_power_shutdown() Power_shutdown(NULL, 0)
-
-#endif // HEADSTAGE_POWER_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_version.h

@@ -1,15 +0,0 @@
-
-#ifndef VERSION_DATE
-#define VERSION_DATE
-
-#define VERSION_DATE_YEAR      20
-#define VERSION_DATE_MONTH     12
-#define VERSION_DATE_DAY       10
-#define VERSION_DATE_HOUR      17
-#define VERSION_DATE_MINUTE    16
-
-// this is NOT the version hash !!
-// it's the last version hash
-#define VERSION_HASH           8808490caa465cc94d14896de28763a5e5c4672b
-#define VERSION_GIT_BRANCH     Elite_OBJ_0.2mv
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/headstage_tni.h

@@ -1,305 +0,0 @@
-
-#ifndef HEADSTAGE_H
-#error "headstage.h not include"
-#endif
-
-#ifdef HEADSTAGE_H_H
-#error "headstage_*.h has be included"
-#endif
-
-#ifndef HEADSTAGE_TNI_H
-#define HEADSTAGE_H_H
-#define HEADSTAGE_TNI_H
-
-// product information
-#define DEVICE_NAME "Elite-v0.1"
-#define MAJOR_PRODUCT_NUMBER 0
-#define MINOR_PRODUCT_NUMBER 1
-#define MAJOR_VERSION_NUMBER 0
-#define MINOR_VERSION_NUMBER 1
-
-// header
-#include <ti/drivers/PIN.h>
-#include "board.h"
-
-/*============
- ==== SPI ====
- ===========*/
-
-/* application use SPI parameters and buffers */
-
-#define SPI_BUFFER_SIZE 16
-
-static uint8_t spi_txbuf[SPI_BUFFER_SIZE] = {0};
-static uint8_t spi_rxbuf[SPI_BUFFER_SIZE] = {0};
-
-/*=============================
- ==== headstage variable ====
- ============================*/
-
-PIN_Handle       pin_handle;
-static PIN_State DBS_rst;
-
-// DBS reset pin
-
-const PIN_Config BLE_IO[] = {
-    //
-    IOID_9 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    IOID_2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    IOID_3 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    IOID_13 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    PIN_TERMINATE  //
-};
-
-/**
- * ADC clock switch signal.
- */
-static bool adc_clock_signal = FALSE;
-
-/*=======================================
- ==== headstage function declaration ====
- ======================================*/
-
-static void headstage_tni_update_instruction_callback(uint8_t ins_type, uint8_t ins_op, uint8_t ins_len, uint8_t *ins);
-
-/*=============================
- ==== ramp data generating ====
- ============================*/
-
-static uint16_t ramp_data_counter = 0;
-
-static void create_ramp(uint8_t *buff) {
-    buff[0] = 0b10110000 | (0b00001111 & (uint8_t)(ramp_data_counter >> 6));
-    buff[1] = (uint8_t)(ramp_data_counter << 2);
-    ramp_data_counter += 1;
-}
-
-/*=======================================
- ==== headstage function implemented ====
- ======================================*/
-
-/**
- * change channel value to little endian
- */
-static uint8 encode_channel(uint8 channel) {
-    return 0x0F & (((channel & 0b1000) >> 3) |  //
-                   ((channel & 0b0100) >> 1) |  //
-                   ((channel & 0b0010) << 1) |  //
-                   ((channel & 0b0001) << 3));
-}
-
-static void headstage_init() {
-    set_update_instruction_callback(headstage_tni_update_instruction_callback);
-
-    // initialize the DBS reset pin
-    pin_handle = PIN_open(&DBS_rst, BLE_IO);
-    PIN_setOutputValue(pin_handle, IOID_9, 1);
-    PIN_setOutputValue(pin_handle, IOID_2, 0);
-    PIN_setOutputValue(pin_handle, IOID_3, 0);
-}
-
-/**
- * change the recording clock bit in the instruction buffer.
- */
-static void update_ins_rec_clock(uint8_t *buf, bool adc_clock_signal) {
-    buf[3] = (buf[3] & 0b11110000) | ((adc_clock_signal) ? 0b1000 : 0);
-}
-
-/**
- * change the recording channel bit in the instruction buffer.
- */
-static void update_ins_rec_channel(uint8_t *buf, uint8 channel) {
-    buf[1] = (buf[1] & 0b00001111) | (encode_channel(channel) << 4);
-}
-
-/**
- * change the stimulation enable bit in the instruction buffer.
- */
-static void update_ins_sti_enable(uint8_t *buf, bool enable) {
-    buf[1] = (buf[1] & 0b11111101) | ((enable) ? 0b10 : 0);
-}
-
-/**
- * change the stimulating channel bit in the instruction buffer.
- */
-static void update_ins_sti_channel(uint8_t *buf, uint8 sti_chp, uint8 sti_chn) {
-    buf[2] = (buf[2] & 0b11110000) | encode_channel(sti_chp);
-    buf[3] = (buf[3] & 0b00001111) | (encode_channel(sti_chn) << 4);
-}
-
-static void update_ins_buffer() {
-    uint8 header      = 0b10100000;
-    uint8 amp_gain    = (INSTRUCTION.amp_gain & 0b11) << 3;
-    uint8 amp_lbf     = INSTRUCTION.amp_low_band_freq & 0b111;
-    uint8 channel     = 0;  // should be call update_ins_channel to modify this value
-    uint8 chopper     = (INSTRUCTION.chopper) ? 0b00001000 : 0;
-    uint8 fast_settle = (INSTRUCTION.fast_settle) ? 0b00000100 : 0;
-    uint8 sti_enable  = (INSTRUCTION.work_mode != STI_MODE_DISABLE) ? 0b00000010 : 0;
-    uint8 sti_volt_l  = (INSTRUCTION.sti_volt & 0b11111) >> 4;
-    uint8 sti_volt_h  = (INSTRUCTION.sti_volt & 0b01111) << 4;
-    uint8 sti_chp     = INSTRUCTION.sti_channel_pmos & 0b1111;
-    uint8 sti_chn     = (INSTRUCTION.sti_channel_nmos & 0b1111) << 4;
-    uint8 clk_signal  = 0;  // should be call update_ins_clock to modify this value
-
-    spi_txbuf[0] = header | amp_gain | amp_lbf;
-    spi_txbuf[1] = channel | chopper | fast_settle | sti_enable | sti_volt_l;
-    spi_txbuf[2] = sti_volt_h | sti_chp;
-    spi_txbuf[3] = sti_chn | clk_signal;
-}
-
-static bool update_ins_rec_buffer() {
-    adc_clock_signal = (adc_clock_signal) ? FALSE : TRUE;  // switch adc_clock
-    update_ins_rec_clock(spi_txbuf, adc_clock_signal);
-
-    if (adc_clock_signal) {
-        // change to next channel
-
-        if (next_active_channel()) {
-            update_ins_rec_channel(spi_txbuf, channel_pointer);
-        } else {
-            // no channel active
-            return false;
-        }
-    }
-
-    return true;
-}
-
-/**
- * Change the instruction content for SPI buffer, which is depended on the
- * work_mode. Expend the remind instruction according to the base instruction
- * which allocated at the beginning 4 bytes of the SPI buffer.
- *
- * ========= ===========
- * work_mode ins pattern
- * ========= ===========
- * POS, NEG  4 F  D 0
- * P2N, N2P  4 4' F D
- * AWF       not impl
- * ========= ===========
- *
- * pattern *4*
- *     stimulation instruction.
- *
- * pattern *F*
- *     set pmos channel to 0xF, release the remain voltage in the capacitance.
- *
- * pattern *D*
- *     disable stimulation
- *
- * pattern *0*
- *     nop.
- *
- * @param: buf: pointer of the SPI buffer.
- */
-static void update_ins_sti_buffer() {
-    switch (INSTRUCTION.work_mode) {
-    case STI_MODE_POS:
-    case STI_MODE_NEG:
-        // copy [4:7]
-        spi_txbuf[4] = spi_txbuf[0];
-        spi_txbuf[5] = spi_txbuf[1];
-        spi_txbuf[6] = spi_txbuf[2];
-        spi_txbuf[7] = spi_txbuf[3];
-        // copy [8:B]
-        spi_txbuf[8]  = spi_txbuf[0];
-        spi_txbuf[9]  = spi_txbuf[1];
-        spi_txbuf[10] = spi_txbuf[2];
-        spi_txbuf[11] = spi_txbuf[3];
-        // reset [C:F]
-        spi_txbuf[12] = 0;
-        spi_txbuf[13] = 0;
-        spi_txbuf[14] = 0;
-        spi_txbuf[15] = 0;
-        // change content
-        update_ins_sti_enable(spi_txbuf, TRUE);
-        // ins buf [4:7]
-        update_ins_sti_enable(spi_txbuf + 4, TRUE);
-        update_ins_sti_channel(spi_txbuf + 4, 0xF, INSTRUCTION.sti_channel_pmos);
-        // ins buf [8:B]
-        update_ins_sti_enable(spi_txbuf + 8, FALSE);
-        break;
-    case STI_MODE_P2N:
-    case STI_MODE_N2P:
-        // copy [4:7]
-        spi_txbuf[4] = spi_txbuf[0];
-        spi_txbuf[5] = spi_txbuf[1];
-        spi_txbuf[6] = spi_txbuf[2];
-        spi_txbuf[7] = spi_txbuf[3];
-        // copy [8:B]
-        spi_txbuf[8]  = spi_txbuf[0];
-        spi_txbuf[9]  = spi_txbuf[1];
-        spi_txbuf[10] = spi_txbuf[2];
-        spi_txbuf[11] = spi_txbuf[3];
-        // copy [C:F]
-        spi_txbuf[12] = spi_txbuf[0];
-        spi_txbuf[13] = spi_txbuf[1];
-        spi_txbuf[14] = spi_txbuf[2];
-        spi_txbuf[15] = spi_txbuf[3];
-        // change content
-        update_ins_sti_enable(spi_txbuf + 0, TRUE);
-        update_ins_sti_channel(spi_txbuf + 0, INSTRUCTION.sti_channel_pmos, INSTRUCTION.sti_channel_nmos);
-        // ins buf [4:7]
-        update_ins_sti_enable(spi_txbuf + 4, TRUE);
-        update_ins_sti_channel(spi_txbuf + 4, INSTRUCTION.sti_channel_nmos, INSTRUCTION.sti_channel_pmos);
-        // ins buf [8:B]
-        update_ins_sti_enable(spi_txbuf + 8, TRUE);
-        update_ins_sti_channel(spi_txbuf + 8, 0xF, INSTRUCTION.sti_channel_nmos);
-        // ins buf [C:F]
-        update_ins_sti_enable(spi_txbuf + 12, FALSE);
-        break;
-    case STI_MODE_AWF:
-        // XXX define the voltage change
-        break;
-    default:
-        // do nothing
-        break;
-    }
-}
-
-static void headstage_tni_update_instruction_callback(uint8_t ins_type, uint8_t ins_op, uint8_t ins_len, uint8_t *ins) {
-    switch (ins_type) {
-    case INS_TYPE_VIS: {
-    // reset
-    case VIS_RST:
-        // reset. reset all variable
-        adc_clock_signal = FALSE;
-        memset(spi_txbuf, 0, SPI_BUFFER_SIZE);
-        break;
-
-    // interrupt
-    case VIS_INT:
-        // stop. reset channel table
-        ramp_data_counter = 0;
-        memset(spi_txbuf, 0, SPI_BUFFER_SIZE);
-        break;
-    }
-    case INS_TYPE_RIS:
-    default:
-        break;
-    }
-}
-
-static uint8_t *spi_transact_rec_instruction() {
-    if (IS_REC_MODE(INSTRUCTION.work_mode)) {
-        PIN_setOutputValue(pin_handle, IOID_13, 1);  // DBS_P2S turn on
-        headstage_spi_transaction(SPI_BUFFER_SIZE, spi_txbuf, spi_rxbuf);
-        PIN_setOutputValue(pin_handle, IOID_13, 0);  // DBS_P2S turn off
-
-    } else if (IS_ARM_MODE(INSTRUCTION.work_mode) && !adc_clock_signal) {
-        create_ramp(spi_rxbuf);
-    }
-
-    if (adc_clock_signal) {
-        return NULL;
-    } else {
-        return spi_rxbuf;
-    }
-}
-
-static uint8_t *spi_transact_sti_instruction() {
-    headstage_spi_transaction(16, spi_txbuf, NULL);
-    return NULL;
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/impedance_meter.h

@@ -1,511 +0,0 @@
-/*
- * impedance_meter.h
- *
- *  Created on: 2019/01/15
- *      Author: benny
- */
-#ifndef HEADSTAGE_H
-#error "headstage.h not include"
-#endif
-
-#ifdef HEADSTAGE_H_H
-#error "headstage_*.h has be included"
-#endif
-
-#ifndef IMPEDANCE_METER_H_
-#define HEADSTAGE_H_H
-#define IMPEDANCE_METER_H_
-
-// header
-#include <ti/drivers/PIN.h>
-#include "board.h"
-#include "EliteWorkData.h"
-#include <driverlib/aon_batmon.h>
-
-static void SimpleBLEPeripheral_performPeriodicTask(WorkMode *WorkModeData);
-
-static void SimpleBLEPeripheral_clockHandler(UArg arg) {
-    // Store the event.
-//    events |= SBP_PERIODIC_EVT;
-
-    // Wake up the application.
-//    Semaphore_post(semaphore);  // send samaphore to jump out of infinite waiting(simple_peripheral.c line570)
-
-}
-static void elite_gptimer_callback(GPTimerCC26XX_Handle handle, GPTimerCC26XX_IntMask interruptMask) {
-    events |= SBP_PERIODIC_EVT;
-    Semaphore_post(semaphore);
-    GPT.GptimerCounter++;
-//    clk_onoff = !clk_onoff;
-}
-
-
-static void ZM_update_instruction_callback(uint8_t ins_type, uint8_t chip_ID, uint8_t *ins);
-
-static void ZM_init() {
-    set_update_instruction_callback(ZM_update_instruction_callback);
-
-    // initialize
-    pin_handle = PIN_open(&ZM_rst, BLE_IO);
-    Init_Elite15_PIN();
-    ELITE15_SPI_HOLD();
-
-    PIN15_setOutputValue(shutdown_6994, 1);     // OFF = 1 => turn off 6994
-    PIN15_setOutputValue(enable_10v, 0);        // enable 10V
-//    PIN15_setOutputValue(enable_5v, 1);        // enable 10V
-    PIN15_setOutputValue(HIGH_Z_MODE, 1);       // HIGH Z MODE // 1 => close high_z mode
-
-    InitEliteInstruction();
-    IinADCGainControl(INSTRUCTION.ADCGainLevel);
-    VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-    VoutGainControl(INSTRUCTION.VoutGainLevel);
-    elite_gptimer_open();
-
-    //    PIN_registerIntCb(pin_handle, switch_on_callback);
-    //    PIN_setInterrupt(pin_handle, switch_on | PIN_IRQ_POSEDGE);
-}
-
-static void ZM_update_instruction_callback(uint8_t ins_type, uint8_t chip_ID, uint8_t *ins) {}
-
-
-static void DACCode2Real2Notify(uint16_t DACcode) {
-    int32_t RealV;
-    RealV = DAC_to_realV(INSTRUCTION.VoutGainLevel, DACcode);
-
-    NotifyVolt[0] = (uint8_t)((RealV & 0xFF000000) >> 24);
-    NotifyVolt[1] = (uint8_t)((RealV & 0x00FF0000) >> 16);
-    NotifyVolt[2] = (uint8_t)((RealV & 0x0000FF00) >> 8);
-    NotifyVolt[3] = (uint8_t)(RealV & 0x000000FF);
-}
-
-#define IsPeriodicMode() (                            \
-(INSTRUCTION.eliteFxn == IV_CURVE)                 || \
-(INSTRUCTION.eliteFxn == CV_CURVE)                 || \
-(INSTRUCTION.eliteFxn == IT_CURVE)                 || \
-(INSTRUCTION.eliteFxn == VT_CURVE)                 || \
-(INSTRUCTION.eliteFxn == ZT_CURVE)                 || \
-(INSTRUCTION.eliteFxn == CONSTANT_CURRENT)         || \
-(INSTRUCTION.eliteFxn == CYCLIC_VOLTAMMETRY)       || \
-(INSTRUCTION.eliteFxn == LINEAR_SWEEP_VOLTAMMETRY) || \
-(INSTRUCTION.eliteFxn == CONSTANT_VSCAN)           || \
-(INSTRUCTION.eliteFxn == CALI_ADC_MODE)               \
-)
-
-#define Ve1MatchVe2Mode() (                           \
-(INSTRUCTION.eliteFxn == IV_CURVE)                 || \
-(INSTRUCTION.eliteFxn == CV_CURVE)                 || \
-(INSTRUCTION.eliteFxn == CYCLIC_VOLTAMMETRY)       || \
-(INSTRUCTION.eliteFxn == LINEAR_SWEEP_VOLTAMMETRY)    \
-)
-
-/*********************************************************************
- * @fn      SimpleBLEPeripheral_performPeriodicTask
- *
- * @brief   Control periodic event such as DAC out, ADC read, and send notify.
- *
- * @param   None.
- *
- * @return  None.
- */
-static void SimpleBLEPeripheral_performPeriodicTask(WorkMode *WorkModeData) {
-    if ( IsPeriodicMode() ){
-        /** Periodic Event **/
-        // Default working flow is vscan -> ADC read -> send notify
-        // We will need a flag to control vscan, ADC and notify
-
-        GPT.DeltaGptimerCounter = GPT.GptimerCounter - GPT.GptimerCounter0;
-        GPT.GptimerCounter0 = GPT.GptimerCounter;
-
-        if(EliteWorkReset){
-            InitEliteGPtimer();
-            EliteWorkReset  = false;
-            batteryADC_flag = false;
-            record_flag     = true;
-            firstTimeReset  = true;
-            VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-            IinADCGainControl(INSTRUCTION.ADCGainLevel);
-            VoutGainControl(INSTRUCTION.VoutGainLevel);
-            if( Ve1MatchVe2Mode() ){
-                if (INSTRUCTION.Ve1 == INSTRUCTION.Ve2) {
-                    DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, INSTRUCTION.Ve1));
-                    PeriodicEvent = false;
-                    ModeLED(NO_EVENT);
-                }
-            }
-        }
-
-
-        GPT.LeadTimeCounter = GPT.LeadTimeCounter + GPT.DeltaGptimerCounter;
-        if(leadTimeReset && GPT.LeadTimeCounter <= 2000){
-            vscanReset = true;
-        }else{
-            if(notifyFirst_flag){
-                GPT.NotifyCounter = INSTRUCTION.notifyRate - 20;
-                notifyFirst_flag = false;
-            }
-            vscanReset = false;
-            leadTimeReset = false;
-        }
-
-        //vscan counter
-        GPT.VscanRateCounter = GPT.VscanRateCounter + GPT.DeltaGptimerCounter;
-        if(GPT.VscanRateCounter >= INSTRUCTION.VsetRate){
-            if(GPT.VscanRateCounter >= INSTRUCTION.VsetRate * 2){
-                GPT.GptimerMultiple = GPT.VscanRateCounter / INSTRUCTION.VsetRate;
-            }else{
-                GPT.GptimerMultiple = 1;
-            }
-            GPT.VscanRateCounter -= INSTRUCTION.VsetRate * GPT.GptimerMultiple; //To get right time
-            vscan_flag = true;
-            if(vscan_flag){
-                EliteVscanControl(WorkModeData);
-                vscan_flag = false;
-            }
-        }
-
-        //battery counter
-        GPT.BatteryADCCounter = GPT.BatteryADCCounter + GPT.DeltaGptimerCounter;
-        GPT.BatteryCheckCounter = GPT.BatteryCheckCounter + GPT.DeltaGptimerCounter;
-        if(GPT.BatteryCheckCounter >= 50000){
-            GPT.BatteryCheckCounter -= 50000; //To get right time
-//            batteryCheck_flag = true;
-            batteryCheck_flag = false;  // set flag "false" for calibration mode
-        }
-
-        uint16_t bat = ((uint16_t)(NotifyVoltBat[2]) << 8 & 0xFF00 ) | ((uint16_t)(NotifyVoltBat[3]) & 0x00FF);
-        if( bat < 768 && bat > 20){
-            PIN15_setOutputValue(enable_5v, 0);
-        }
-
-        //ADC counter
-        GPT.SampleRateCounter = GPT.SampleRateCounter + GPT.DeltaGptimerCounter;
-        if(GPT.SampleRateCounter >= INSTRUCTION.sampleRate){
-            GPT.SampleRateCounter = 0; //To get right data, ADC must be delay 1.5ms
-            ADC_flag = true;
-            if(ADC_flag){
-                EliteADCControl(WorkModeData);
-                ADC_flag = false;
-            }
-        }
-
-        //Notify counter(Notify control, check if we need to send notify)
-        //please don't put Notify counter before ADC counter, maybe get wrong data
-        GPT.NotifyCounter = GPT.NotifyCounter + GPT.DeltaGptimerCounter;
-        if(GPT.NotifyCounter >= INSTRUCTION.notifyRate){
-            GPT.NotifyCounter -= INSTRUCTION.notifyRate; //To get right time
-            notify_flag = true;
-            if(vscanReset){
-                notify_flag = false;
-            }
-            if(notify_flag){
-                SendNotify();
-                notify_flag = false;
-            }
-        }
-
-//        EliteDone();
-    }
-    else if (INSTRUCTION.eliteFxn == PULSE_MODE){
-         /** Periodic Event **/
-         // Default working flow is vscan -> ADC read -> send notify
-         // We will need a flag to control vscan, ADC and notify
-
-         GPT.DeltaGptimerCounter = GPT.GptimerCounter - GPT.GptimerCounter0;
-         GPT.GptimerCounter0 = GPT.GptimerCounter;
-
-         if(EliteWorkReset){
-             InitEliteGPtimer();
-             EliteWorkReset  = false;
-             batteryADC_flag = false;
-             record_flag     = true;
-             firstTimeReset  = true;
-             //pulsemode variable
-             stiFirstTime  = true;
-             VinADCGainControl(INSTRUCTION.VinADCGainLevel);
-             IinADCGainControl(INSTRUCTION.ADCGainLevel);
-             VoutGainControl(INSTRUCTION.VoutGainLevel);
-             if (Ve1MatchVe2Mode()) {
-                 if (INSTRUCTION.Ve1 == INSTRUCTION.Ve2) {
-                     DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, INSTRUCTION.Ve1));
-                     PeriodicEvent = false;
-                     ModeLED(NO_EVENT);
-                 }
-             } else if (INSTRUCTION.eliteFxn == PULSE_MODE) {
-                 if(!megaStiEnable){
-                      PeriodicEvent = false;
-                      ModeLED(NO_EVENT);
-                 }
-             }
-         }
-
-
-         GPT.LeadTimeCounter = GPT.LeadTimeCounter + GPT.DeltaGptimerCounter;
-         if(leadTimeReset && GPT.LeadTimeCounter <= 2000){
-             vscanReset = true;
-         }else{
-             if(notifyFirst_flag){
-                 GPT.NotifyCounter = INSTRUCTION.notifyRate - 20;
-                 notifyFirst_flag = false;
-             }
-             vscanReset = false;
-             leadTimeReset = false;
-         }
-
-        //vscan counter
-        GPT.VscanRateCounter = GPT.VscanRateCounter + GPT.DeltaGptimerCounter;
-        //pulse mode counter
-        GPT.StiCounter = GPT.StiCounter + GPT.DeltaGptimerCounter;
-        if (vscanReset) {
-            DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, 25000));
-            DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, 25000));
-            //vscanReset = false;
-        }else{
-            if (megaStiEnable) {
-                PULSE_Vscan(WorkModeData->PULSE);
-            }
-        }
-
-//         if(GPT.VscanRateCounter >= INSTRUCTION.VsetRate){
-//             if(GPT.VscanRateCounter >= INSTRUCTION.VsetRate * 2){
-//                 GPT.GptimerMultiple = GPT.VscanRateCounter / INSTRUCTION.VsetRate;
-//             }else{
-//                 GPT.GptimerMultiple = 1;
-//             }
-//             GPT.VscanRateCounter -= INSTRUCTION.VsetRate * GPT.GptimerMultiple; //To get right time
-//             vscan_flag = true;
-//             if(vscan_flag){
-//                 EliteVscanControl(WorkModeData);
-//                 vscan_flag = false;
-//             }
-//         }
-
-         //battery counter
-         GPT.BatteryADCCounter = GPT.BatteryADCCounter + GPT.DeltaGptimerCounter;
-         GPT.BatteryCheckCounter = GPT.BatteryCheckCounter + GPT.DeltaGptimerCounter;
-         if(GPT.BatteryCheckCounter >= 50000){
-             GPT.BatteryCheckCounter -= 50000; //To get right time
-             batteryCheck_flag = true;
-         }
-
-         uint16_t bat = ((uint16_t)(NotifyVoltBat[2]) << 8 & 0xFF00 ) | ((uint16_t)(NotifyVoltBat[3]) & 0x00FF);
-         if( bat < 768 && bat > 20){
-             PIN15_setOutputValue(enable_5v, 0);
-         }
-
-         //ADC counter
-         GPT.SampleRateCounter = GPT.SampleRateCounter + GPT.DeltaGptimerCounter;
-         if(GPT.SampleRateCounter >= INSTRUCTION.sampleRate){
-             GPT.SampleRateCounter = 0; //To get right data, ADC must be delay 1.5ms
-             ADC_flag = true;
-             if(ADC_flag){
-                 EliteADCControl(WorkModeData);
-                 ADC_flag = false;
-             }
-         }
-
-         //Notify counter(Notify control, check if we need to send notify)
-         //please don't put Notify counter before ADC counter, maybe get wrong data
-         GPT.NotifyCounter = GPT.NotifyCounter + GPT.DeltaGptimerCounter;
-         if(GPT.NotifyCounter >= INSTRUCTION.notifyRate){
-             GPT.NotifyCounter -= INSTRUCTION.notifyRate; //To get right time
-             notify_flag = true;
-             if(vscanReset){
-                 notify_flag = false;
-             }
-             if(notify_flag){
-                 SendNotify();
-                 notify_flag = false;
-             }
-         }
-
- //        EliteDone();
-     }
-    else if(INSTRUCTION.eliteFxn == VOLT_OUTPUT){
-        VoutGainControl(INSTRUCTION.VoutGainLevel);
-        WorkModeData->VO->_Vset = INSTRUCTION.VoltConstant;
-        DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, WorkModeData->VO->_Vset)); //UserCode -> DAC code -> DAC out
-        FreeWorkMode(WorkModeData);
-        PeriodicEvent = false;
-    }
-    else if(INSTRUCTION.eliteFxn == CALI_DAC_MODE){
-        DAC_outputV(INSTRUCTION.VoltConstant); //UserCode -> DAC code -> DAC out
-        FreeWorkMode(WorkModeData);
-        PeriodicEvent = false;
-    }
-    else{
-//        InitFlag();
-    }
-}
-
-static void EliteADCControl(WorkMode *WorkModeData) {
-    switch (INSTRUCTION.eliteFxn) {
-        case IV_CURVE:{
-            CC_Plot(WorkModeData);
-            break;
-        }
-        case CV_CURVE:{
-            CC_Plot(WorkModeData);
-            break;
-        }
-        case IT_CURVE:{
-            IT_Plot(WorkModeData);
-            break;
-        }
-        case VT_CURVE:{
-            VT_Plot(WorkModeData);
-            break;
-        }
-        case ZT_CURVE:{
-            CC_Plot(WorkModeData);
-            break;
-        }
-        case CONSTANT_CURRENT:{
-            CC_Plot(WorkModeData);
-            break;
-        }
-        case CYCLIC_VOLTAMMETRY:{
-            CC_Plot(WorkModeData);
-            break;
-        }
-        case LINEAR_SWEEP_VOLTAMMETRY:{
-            CC_Plot(WorkModeData);
-            break;
-        }
-        case CONSTANT_VSCAN:{
-            CC_Plot(WorkModeData);
-            break;
-        }
-        case CALI_ADC_MODE:{
-            if(INSTRUCTION.AdcChannel == IIN_ADC){
-                cali_IT_plot(WorkModeData);
-            }else if(INSTRUCTION.AdcChannel == VIN_ADC){
-                cali_VT_plot(WorkModeData);
-            }else if(INSTRUCTION.AdcChannel == VOUT_DAC){
-//                DAC_outputV(INSTRUCTION.VoltConstant); //UserCode -> DAC code -> DAC out
-                cali_VT_plot(WorkModeData);
-            }
-
-            break;
-        }
-        case PULSE_MODE:{
-            CC_Plot(WorkModeData);
-            break;
-        }
-        default:{
-            break;
-        }
-    }
-}
-
-static void EliteDone() {
-    if ((INSTRUCTION.eliteFxn == IV_CURVE) || (INSTRUCTION.eliteFxn == CV_CURVE) || (INSTRUCTION.eliteFxn == CYCLIC_VOLTAMMETRY)) {
-        if (!PeriodicEvent) {
-            SendNotify();
-            Eliteinterrupt();
-        }
-    }
-}
-
-static void EliteVscanControl(WorkMode *WorkModeData) {
-    switch (INSTRUCTION.eliteFxn) {
-        case IV_CURVE:{
-            IV_Vscan(WorkModeData->IV);
-            break;
-        }
-        case CV_CURVE:{
-            CV_Vscan(WorkModeData->CV);
-            break;
-        }
-        case ZT_CURVE:{
-            ZT_Vscan(WorkModeData->RT);
-            break;
-        }
-        case CYCLIC_VOLTAMMETRY:{
-            CV3_Vscan(WorkModeData->CV3);
-            break;
-        }
-        case CONSTANT_CURRENT:{
-            CC_Vscan(WorkModeData->CC);
-            break;
-        }
-        case LINEAR_SWEEP_VOLTAMMETRY:{
-            LSV_Vscan(WorkModeData->LSV);
-            break;
-        }
-        case CONSTANT_VSCAN:{
-            CVSCAN_Vscan(WorkModeData->CVSCAN);
-            break;
-        }
-        case PULSE_MODE:{
-//            PULSE_Vscan(WorkModeData->PULSE);
-            break;
-        }
-        default:{
-            break;
-        }
-    }
-}
-
-static uint32_t OldStep2NewStepTime(uint32_t StepTime){
-    uint8_t StepTimeLevel = 0;
-    StepTimeLevel = StepTime / 0x12;
-
-    switch (StepTimeLevel) {
-        case 0: {  //0.5 sec
-            return STEPTIME_HALF_SEC;
-        }
-        case 1: {  //1 sec
-            return STEPTIME_ONE_SEC;
-        }
-        case 2: {  //2 sec
-            return STEPTIME_TWO_SEC;
-        }
-        default: {  //1 sec
-            return STEPTIME_ONE_SEC;
-        }
-    }
-}
-
-static void step2VsetRate(uint32_t step){
-    /*step = 100 mv, index = 0, n = 2
-             10  mv, index = 1, n = 10
-             1   mv, index = 2, n = 100
-             0.1 mv, index = 3, n = 1000
-             0.01mv, index = 4, n = 10000  */
-
-    if(step >= 10000){
-        INSTRUCTION.VsetRateIndex = 0;
-    }else if (step >= 1000){
-        INSTRUCTION.VsetRateIndex = 1;
-    }else if (step >= 100){
-        INSTRUCTION.VsetRateIndex = 2;
-    }else if (step >= 10){
-        INSTRUCTION.VsetRateIndex = 3;
-    }else if (step >= 1){
-        INSTRUCTION.VsetRateIndex = 4;
-    }
-}
-
-static void InitFlag(){
-    PeriodicEvent     = false;     // is there an PeriodicEvent?
-    Free_Work_Mode    = true;      // Free(WorkModeData)
-}
-
-static void InitEliteGPtimer() {
-    GPT.SampleRateCounter = INSTRUCTION.sampleRate - 10;
-    GPT.VscanRateCounter  = INSTRUCTION.VsetRate - 1;
-    notifyFirst_flag      = true;
-}
-
-static void InitEliteFlag() {
-    InitPeriodicEvent = true;      // need to create a WorkModeData?
-    DACReset          = true;
-    vscanReset        = true;
-    EliteWorkReset    = true;
-    leadTimeReset     = true;
-    I_GAIN_100R_counter = 0;
-    I_GAIN_3K_counter   = 0;
-    I_GAIN_100K_counter = 0;
-    I_GAIN_3M_counter   = 0;
-}
-#endif /* IMPEDANCE_METER_H_ */

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/main.c

@@ -50,13 +50,9 @@
 
 #include <xdc/runtime/Error.h>
 
-
 #include <ti/drivers/Power.h>
 #include <ti/drivers/power/PowerCC26XX.h>
 #include <ti/sysbios/BIOS.h>
-#include <ti/drivers/SPI.h>
-#include <ti/drivers/spi/SPICC26XXDMA.h>
-#include <ti/drivers/dma/UDMACC26XX.h>
 
 #include "icall.h"
 #include "hal_assert.h"
@@ -136,7 +132,7 @@ PIN_Handle radCtrlHandle;
 
 extern void AssertHandler(uint8 assertCause, uint8 assertSubcause);
 
-//extern Display_Handle dispHandle;
+// extern Display_Handle dispHandle;
 
 /*******************************************************************************
  * @fn          Main
@@ -251,48 +247,49 @@ int main()
  */
 void AssertHandler(uint8 assertCause, uint8 assertSubcause)
 {
+/*
   // Open the display if the app has not already done so
-//  if ( !dispHandle )
-//  {
-//    dispHandle = Display_open(Display_Type_LCD, NULL);
-//  }
+  if ( !dispHandle )
+  {
+    dispHandle = Display_open(Display_Type_LCD, NULL);
+  }
 
-
-//  Display_print0(dispHandle, 0, 0, ">>>STACK ASSERT");
+  Display_print0(dispHandle, 0, 0, ">>>STACK ASSERT");
 
   // check the assert cause
-//  switch (assertCause)
-//  {
-//    case HAL_ASSERT_CAUSE_OUT_OF_MEMORY:
-//      Display_print0(dispHandle, 0, 0, "***ERROR***");
-//      Display_print0(dispHandle, 2, 0, ">> OUT OF MEMORY!");
-//      break;
-//
-//    case HAL_ASSERT_CAUSE_INTERNAL_ERROR:
-//      // check the subcause
-//      if (assertSubcause == HAL_ASSERT_SUBCAUSE_FW_INERNAL_ERROR)
-//      {
-//        Display_print0(dispHandle, 0, 0, "***ERROR***");
-//        Display_print0(dispHandle, 2, 0, ">> INTERNAL FW ERROR!");
-//      }
-//      else
-//      {
-//        Display_print0(dispHandle, 0, 0, "***ERROR***");
-//        Display_print0(dispHandle, 2, 0, ">> INTERNAL ERROR!");
-//      }
-//      break;
-//
-//    case HAL_ASSERT_CAUSE_ICALL_ABORT:
-//      Display_print0(dispHandle, 0, 0, "***ERROR***");
-//      Display_print0(dispHandle, 2, 0, ">> ICALL ABORT!");
-//      HAL_ASSERT_SPINLOCK;
-//      break;
-//
-//    default:
-//      Display_print0(dispHandle, 0, 0, "***ERROR***");
-//      Display_print0(dispHandle, 2, 0, ">> DEFAULT SPINLOCK!");
-//      HAL_ASSERT_SPINLOCK;
-//  }
+  switch (assertCause)
+  {
+    case HAL_ASSERT_CAUSE_OUT_OF_MEMORY:
+      Display_print0(dispHandle, 0, 0, "***ERROR***");
+      Display_print0(dispHandle, 2, 0, ">> OUT OF MEMORY!");
+      break;
+
+    case HAL_ASSERT_CAUSE_INTERNAL_ERROR:
+      // check the subcause
+      if (assertSubcause == HAL_ASSERT_SUBCAUSE_FW_INERNAL_ERROR)
+      {
+        Display_print0(dispHandle, 0, 0, "***ERROR***");
+        Display_print0(dispHandle, 2, 0, ">> INTERNAL FW ERROR!");
+      }
+      else
+      {
+        Display_print0(dispHandle, 0, 0, "***ERROR***");
+        Display_print0(dispHandle, 2, 0, ">> INTERNAL ERROR!");
+      }
+      break;
+
+    case HAL_ASSERT_CAUSE_ICALL_ABORT:
+      Display_print0(dispHandle, 0, 0, "***ERROR***");
+      Display_print0(dispHandle, 2, 0, ">> ICALL ABORT!");
+      HAL_ASSERT_SPINLOCK;
+      break;
+
+    default:
+      Display_print0(dispHandle, 0, 0, "***ERROR***");
+      Display_print0(dispHandle, 2, 0, ">> DEFAULT SPINLOCK!");
+      HAL_ASSERT_SPINLOCK;
+  }
+*/
 
   return;
 }

simplelink/ble_sdk_2_02_02_25/src/profiles/simple_profile/cc26xx/simple_gatt_profile.c

@@ -9,7 +9,7 @@
  Target Device: CC2650, CC2640
 
  ******************************************************************************
-
+ 
  Copyright (c) 2010-2018, Texas Instruments Incorporated
  All rights reserved.
 
@@ -135,6 +135,7 @@ static simpleProfileCBs_t *simpleProfile_AppCBs = NULL;
 // Simple Profile Service attribute
 static CONST gattAttrType_t simpleProfileService = { ATT_BT_UUID_SIZE, simpleProfileServUUID };
 
+
 // Simple Profile Characteristic 1 Properties
 // static uint8 simpleProfileChar1Props = GATT_PROP_READ | GATT_PROP_WRITE;
 /*user insert*/
@@ -143,12 +144,13 @@ static uint8 simpleProfileChar1Props = GATT_PROP_READ;
 // Characteristic 1 Value
 // static uint8 simpleProfileChar1 = 0;
 /*user insert*/
-#define SIMPLEPROFILE_CHAR1_LEN 20
 static uint8 simpleProfileChar1[SIMPLEPROFILE_CHAR1_LEN] = {0};
 
+
 // Simple Profile Characteristic 1 User Description
 static uint8 simpleProfileChar1UserDesp[17] = "Characteristic 1";
 
+
 // Simple Profile Characteristic 2 Properties
 static uint8 simpleProfileChar2Props = GATT_PROP_READ;
 
@@ -157,9 +159,11 @@ static uint8 simpleProfileChar2Props = GATT_PROP_READ;
 /*user insert*/
 static uint8 simpleProfileChar2[SIMPLEPROFILE_CHAR2_LEN] = {0};
 
+
 // Simple Profile Characteristic 2 User Description
 static uint8 simpleProfileChar2UserDesp[17] = "Characteristic 2";
 
+
 // Simple Profile Characteristic 3 Properties
 static uint8 simpleProfileChar3Props = GATT_PROP_WRITE;
 
@@ -168,9 +172,11 @@ static uint8 simpleProfileChar3Props = GATT_PROP_WRITE;
 /*user insert*/
 static uint8 simpleProfileChar3[SIMPLEPROFILE_CHAR3_LEN] = {0};
 
+
 // Simple Profile Characteristic 3 User Description
 static uint8 simpleProfileChar3UserDesp[17] = "Characteristic 3";
 
+
 // Simple Profile Characteristic 4 Properties
 static uint8 simpleProfileChar4Props = GATT_PROP_NOTIFY;
 
@@ -179,6 +185,7 @@ static uint8 simpleProfileChar4Props = GATT_PROP_NOTIFY;
 /*user insert*/
 static uint8 simpleProfileChar4[SIMPLEPROFILE_CHAR4_LEN] = {0};
 
+
 // Simple Profile Characteristic 4 Configuration Each client has its own
 // instantiation of the Client Characteristic Configuration. Reads of the
 // Client Characteristic Configuration only shows the configuration for
@@ -188,6 +195,7 @@ static gattCharCfg_t *simpleProfileChar4Config;
 // Simple Profile Characteristic 4 User Description
 static uint8 simpleProfileChar4UserDesp[17] = "Characteristic 4";
 
+
 // Simple Profile Characteristic 5 Properties
 static uint8 simpleProfileChar5Props = GATT_PROP_READ;
 
@@ -222,17 +230,17 @@ static gattAttribute_t simpleProfileAttrTbl[SERVAPP_NUM_ATTR_SUPPORTED] =
       // Characteristic Value 1
       {
         { ATT_BT_UUID_SIZE, simpleProfilechar1UUID },
-      	GATT_PERMIT_READ,
-      	0,
-      	simpleProfileChar1
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar1
       },
 
       // Characteristic 1 User Description
       {
         { ATT_BT_UUID_SIZE, charUserDescUUID },
-    	GATT_PERMIT_READ,
-    	0,
-    	simpleProfileChar1UserDesp
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar1UserDesp
       },
 
     // Characteristic 2 Declaration
@@ -246,114 +254,112 @@ static gattAttribute_t simpleProfileAttrTbl[SERVAPP_NUM_ATTR_SUPPORTED] =
       // Characteristic Value 2
       {
         { ATT_BT_UUID_SIZE, simpleProfilechar2UUID },
-	    GATT_PERMIT_READ,
-	    0,
-	    simpleProfileChar2
-	  },
-	  
-	  // Characteristic 2 User Description
-	  {
-	    { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-	    GATT_PERMIT_READ, 
-	    0, 
-	    simpleProfileChar2UserDesp
-	  },
-
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar2
+      },
 
+      // Characteristic 2 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar2UserDesp
+      },
 
     // Characteristic 3 Declaration
     {
-      { ATT_BT_UUID_SIZE, characterUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
+      { ATT_BT_UUID_SIZE, characterUUID },
+      GATT_PERMIT_READ,
+      0,
       &simpleProfileChar3Props
     },
 
-    // Characteristic Value 3
-    {
-      { ATT_BT_UUID_SIZE, simpleProfilechar3UUID }, 
-      GATT_PERMIT_WRITE, 
-      0, 
-      simpleProfileChar3
-    },
+      // Characteristic Value 3
+      {
+        { ATT_BT_UUID_SIZE, simpleProfilechar3UUID },
+        GATT_PERMIT_WRITE,
+        0,
+        simpleProfileChar3
+      },
 
-    // Characteristic 3 User Description
-    {
-      { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
-      simpleProfileChar3UserDesp
-    },
+      // Characteristic 3 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar3UserDesp
+      },
 
     // Characteristic 4 Declaration
     {
-      { ATT_BT_UUID_SIZE, characterUUID }, 
-      GATT_PERMIT_READ, 
+      { ATT_BT_UUID_SIZE, characterUUID },
+      GATT_PERMIT_READ,
       0,
       &simpleProfileChar4Props
     },
 
-    // Characteristic Value 4
-    {
-      { ATT_BT_UUID_SIZE, simpleProfilechar4UUID }, 
-      0, 
-      0, 
-      simpleProfileChar4
-    },
+      // Characteristic Value 4
+      {
+        { ATT_BT_UUID_SIZE, simpleProfilechar4UUID },
+        0,
+        0,
+        simpleProfileChar4
+      },
 
-    // Characteristic 4 configuration
-    {
-      { ATT_BT_UUID_SIZE, clientCharCfgUUID }, 
-      GATT_PERMIT_READ | GATT_PERMIT_WRITE, 
-      0, 
-      (uint8 *)&simpleProfileChar4Config
-    },
+      // Characteristic 4 configuration
+      {
+        { ATT_BT_UUID_SIZE, clientCharCfgUUID },
+        GATT_PERMIT_READ | GATT_PERMIT_WRITE,
+        0,
+        (uint8 *)&simpleProfileChar4Config
+      },
 
-    // Characteristic 4 User Description
-    {
-      { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
-      simpleProfileChar4UserDesp
-    },
+      // Characteristic 4 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar4UserDesp
+      },
 
     // Characteristic 5 Declaration
     {
-      { ATT_BT_UUID_SIZE, characterUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
+      { ATT_BT_UUID_SIZE, characterUUID },
+      GATT_PERMIT_READ,
+      0,
       &simpleProfileChar5Props
     },
 
-    // Characteristic Value 5
-    {
-      { ATT_BT_UUID_SIZE, simpleProfilechar5UUID }, 
-      GATT_PERMIT_AUTHEN_READ, 
-      0, 
-      simpleProfileChar5
-    },
+      // Characteristic Value 5
+      {
+        { ATT_BT_UUID_SIZE, simpleProfilechar5UUID },
+        GATT_PERMIT_AUTHEN_READ,
+        0,
+        simpleProfileChar5
+      },
 
-    // Characteristic 5 User Description
-    {
-      { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
-      simpleProfileChar5UserDesp
-    },
+      // Characteristic 5 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar5UserDesp
+      },
 };
 
 /*********************************************************************
  * LOCAL FUNCTIONS
  */
 static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle,
-										  gattAttribute_t *pAttr,
-										  uint8_t *pValue, uint16_t *pLen,
-										  uint16_t offset, uint16_t maxLen,
-										  uint8_t method);
+                                          gattAttribute_t *pAttr,
+                                          uint8_t *pValue, uint16_t *pLen,
+                                          uint16_t offset, uint16_t maxLen,
+                                          uint8_t method);
 static bStatus_t simpleProfile_WriteAttrCB(uint16_t connHandle,
-										   gattAttribute_t *pAttr,
-										   uint8_t *pValue, uint16_t len,
-										   uint16_t offset, uint8_t method);
+                                           gattAttribute_t *pAttr,
+                                           uint8_t *pValue, uint16_t len,
+                                           uint16_t offset, uint8_t method);
 
 /*********************************************************************
  * PROFILE CALLBACKS
@@ -395,7 +401,7 @@ bStatus_t SimpleProfile_AddService( uint32 services )
 
   // Allocate Client Characteristic Configuration table
   simpleProfileChar4Config = (gattCharCfg_t *)ICall_malloc( sizeof(gattCharCfg_t) *
-  														    linkDBNumConns );
+                                                            linkDBNumConns );
   if ( simpleProfileChar4Config == NULL )
   {
     return ( bleMemAllocError );
@@ -408,9 +414,9 @@ bStatus_t SimpleProfile_AddService( uint32 services )
   {
     // Register GATT attribute list and CBs with GATT Server App
     status = GATTServApp_RegisterService( simpleProfileAttrTbl,
-    									  GATT_NUM_ATTRS( simpleProfileAttrTbl ),
-    									  GATT_MAX_ENCRYPT_KEY_SIZE,
-    									  &simpleProfileCBs );
+                                          GATT_NUM_ATTRS( simpleProfileAttrTbl ),
+                                          GATT_MAX_ENCRYPT_KEY_SIZE,
+                                          &simpleProfileCBs );
   }
   else
   {
@@ -468,7 +474,7 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       {
         memcpy(simpleProfileChar1, value, len);
         // simpleProfileChar1 = *((uint8*)value);
-      } 
+      }
       else
       {
         ret = bleInvalidRange;
@@ -482,7 +488,7 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
         // simpleProfileChar2 = *((uint8*)value);
       }
       else
-	  {
+      {
         ret = bleInvalidRange;
       }
       break;
@@ -491,7 +497,8 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       if (len <= SIMPLEPROFILE_CHAR3_LEN) 
       {
         memcpy(simpleProfileChar3, value, len);
-      } 
+        // simpleProfileChar3 = *((uint8*)value);
+      }
       else
       {
         ret = bleInvalidRange;
@@ -502,9 +509,12 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       if (len <= SIMPLEPROFILE_CHAR4_LEN)
       {
         memcpy(simpleProfileChar4, value, len);
+        // simpleProfileChar4 = *((uint8*)value);
 
         // See if Notification has been enabled
-        GATTServApp_ProcessCharCfg(simpleProfileChar4Config, simpleProfileChar4, FALSE, simpleProfileAttrTbl, GATT_NUM_ATTRS(simpleProfileAttrTbl), INVALID_TASK_ID, simpleProfile_ReadAttrCB);
+        GATTServApp_ProcessCharCfg( simpleProfileChar4Config, simpleProfileChar4, FALSE,
+                                    simpleProfileAttrTbl, GATT_NUM_ATTRS( simpleProfileAttrTbl ),
+                                    INVALID_TASK_ID, simpleProfile_ReadAttrCB );
       }
       else
       {
@@ -513,8 +523,9 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       break;
 
     case SIMPLEPROFILE_CHAR5:
-      if (len == SIMPLEPROFILE_CHAR5_LEN) {
-        VOID memcpy(simpleProfileChar5, value, SIMPLEPROFILE_CHAR5_LEN);
+      if ( len == SIMPLEPROFILE_CHAR5_LEN )
+      {
+        VOID memcpy( simpleProfileChar5, value, SIMPLEPROFILE_CHAR5_LEN );
       }
       else
       {
@@ -543,37 +554,41 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
  *
  * @return  bStatus_t
  */
-bStatus_t SimpleProfile_GetParameter(uint8 param, void *value) {
-    bStatus_t ret = SUCCESS;
-    switch (param) {
+bStatus_t SimpleProfile_GetParameter( uint8 param, void *value )
+{
+  bStatus_t ret = SUCCESS;
+  switch ( param )
+  {
     case SIMPLEPROFILE_CHAR1:
-        memcpy(value, simpleProfileChar1, SIMPLEPROFILE_CHAR1_LEN);
-        //      *((uint8*)value) = simpleProfileChar1;
-        break;
+      memcpy(value, simpleProfileChar1, SIMPLEPROFILE_CHAR1_LEN);
+      // *((uint8*)value) = simpleProfileChar1;
+      break;
 
     case SIMPLEPROFILE_CHAR2:
-        memcpy(value, simpleProfileChar2, SIMPLEPROFILE_CHAR2_LEN);
-        //      *((uint8*)value) = simpleProfileChar2;
-        break;
+      memcpy(value, simpleProfileChar2, SIMPLEPROFILE_CHAR2_LEN);
+      // *((uint8*)value) = simpleProfileChar2;
+      break;
 
     case SIMPLEPROFILE_CHAR3:
-        memcpy(value, simpleProfileChar3, SIMPLEPROFILE_CHAR3_LEN);
-        break;
+      memcpy(value, simpleProfileChar3, SIMPLEPROFILE_CHAR3_LEN);
+      // *((uint8*)value) = simpleProfileChar3;
+      break;
 
     case SIMPLEPROFILE_CHAR4:
-        memcpy(value, simpleProfileChar4, SIMPLEPROFILE_CHAR4_LEN);
-        break;
+      memcpy(value, simpleProfileChar4, SIMPLEPROFILE_CHAR4_LEN);
+      // *((uint8*)value) = simpleProfileChar4;
+      break;
 
     case SIMPLEPROFILE_CHAR5:
-        VOID memcpy(value, simpleProfileChar5, SIMPLEPROFILE_CHAR5_LEN);
-        break;
+      VOID memcpy( value, simpleProfileChar5, SIMPLEPROFILE_CHAR5_LEN );
+      break;
 
     default:
-        ret = INVALIDPARAMETER;
-        break;
-    }
+      ret = INVALIDPARAMETER;
+      break;
+  }
 
-    return (ret);
+  return ( ret );
 }
 
 /*********************************************************************
@@ -591,62 +606,65 @@ bStatus_t SimpleProfile_GetParameter(uint8 param, void *value) {
  *
  * @return      SUCCESS, blePending or Failure
  */
-static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle, gattAttribute_t *pAttr, uint8_t *pValue, uint16_t *pLen, uint16_t offset, uint16_t maxLen, uint8_t method) {
-    bStatus_t status = SUCCESS;
+static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle,
+                                          gattAttribute_t *pAttr,
+                                          uint8_t *pValue, uint16_t *pLen,
+                                          uint16_t offset, uint16_t maxLen,
+                                          uint8_t method)
+{
+  bStatus_t status = SUCCESS;
 
-    // Make sure it's not a blob operation (no attributes in the profile are long)
-    if (offset > 0) {
-        return (ATT_ERR_ATTR_NOT_LONG);
+  // Make sure it's not a blob operation (no attributes in the profile are long)
+  if ( offset > 0 )
+  {
+    return ( ATT_ERR_ATTR_NOT_LONG );
+  }
+
+  if ( pAttr->type.len == ATT_BT_UUID_SIZE )
+  {
+    // 16-bit UUID
+    uint16 uuid = BUILD_UINT16( pAttr->type.uuid[0], pAttr->type.uuid[1]);
+    switch ( uuid )
+    {
+      // No need for "GATT_SERVICE_UUID" or "GATT_CLIENT_CHAR_CFG_UUID" cases;
+      // gattserverapp handles those reads
+
+      // characteristics 1 and 2 have read permissions
+      // characteritisc 3 does not have read permissions; therefore it is not
+      //   included here
+      // characteristic 4 does not have read permissions, but because it
+      //   can be sent as a notification, it is included here
+      case SIMPLEPROFILE_CHAR1_UUID:
+        *pLen = SIMPLEPROFILE_CHAR1_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR1_LEN );
+      case SIMPLEPROFILE_CHAR2_UUID:
+              *pLen = SIMPLEPROFILE_CHAR2_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR2_LEN );
+      case SIMPLEPROFILE_CHAR4_UUID:
+        *pLen = SIMPLEPROFILE_CHAR4_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR4_LEN );
+        break;
+
+      case SIMPLEPROFILE_CHAR5_UUID:
+        *pLen = SIMPLEPROFILE_CHAR5_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR5_LEN );
+        break;
+
+      default:
+        // Should never get here! (characteristics 3 and 4 do not have read permissions)
+        *pLen = 0;
+        status = ATT_ERR_ATTR_NOT_FOUND;
+        break;
     }
+  }
+  else
+  {
+    // 128-bit UUID
+    *pLen = 0;
+    status = ATT_ERR_INVALID_HANDLE;
+  }
 
-    if (pAttr->type.len == ATT_BT_UUID_SIZE) {
-        // 16-bit UUID
-        uint16 uuid = BUILD_UINT16(pAttr->type.uuid[0], pAttr->type.uuid[1]);
-        switch (uuid) {
-        // No need for "GATT_SERVICE_UUID" or "GATT_CLIENT_CHAR_CFG_UUID" cases;
-        // gattserverapp handles those reads
-
-        // characteristics 1 and 2 have read permissions
-        // characteritisc 3 does not have read permissions; therefore it is not
-        //   included here
-        // characteristic 4 does not have read permissions, but because it
-        //   can be sent as a notification, it is included here
-        case SIMPLEPROFILE_CHAR1_UUID:
-            *pLen = SIMPLEPROFILE_CHAR1_LEN;
-            VOID memcpy(pValue, pAttr->pValue, SIMPLEPROFILE_CHAR1_LEN);
-            break;
-
-        case SIMPLEPROFILE_CHAR2_UUID:
-            //        *pLen = 1;
-            //        pValue[0] = *pAttr->pValue;
-
-            *pLen = SIMPLEPROFILE_CHAR2_LEN;
-            VOID memcpy(pValue, pAttr->pValue, SIMPLEPROFILE_CHAR2_LEN);
-            break;
-
-        case SIMPLEPROFILE_CHAR4_UUID:
-            *pLen = SIMPLEPROFILE_CHAR4_LEN;
-            VOID memcpy(pValue, pAttr->pValue, SIMPLEPROFILE_CHAR4_LEN);
-            break;
-            //      case SIMPLEPROFILE_CHAR5_UUID:
-
-            //        *pLen = SIMPLEPROFILE_CHAR5_LEN;
-            //        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR5_LEN );
-            //        break;
-
-        default:
-            // Should never get here! (characteristics 3 and 4 do not have read permissions)
-            *pLen  = 0;
-            status = ATT_ERR_ATTR_NOT_FOUND;
-            break;
-        }
-    } else {
-        // 128-bit UUID
-        *pLen  = 0;
-        status = ATT_ERR_INVALID_HANDLE;
-    }
-
-    return (status);
+  return ( status );
 }
 
 /*********************************************************************
@@ -663,83 +681,83 @@ static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle, gattAttribute_t *
  *
  * @return  SUCCESS, blePending or Failure
  */
-static bStatus_t simpleProfile_WriteAttrCB(uint16_t connHandle, gattAttribute_t *pAttr, uint8_t *pValue, uint16_t len, uint16_t offset, uint8_t method) {
-    bStatus_t status    = SUCCESS;
-    uint8     notifyApp = 0xFF;
+static bStatus_t simpleProfile_WriteAttrCB(uint16_t connHandle,
+                                           gattAttribute_t *pAttr,
+                                           uint8_t *pValue, uint16_t len,
+                                           uint16_t offset, uint8_t method)
+{
+  bStatus_t status = SUCCESS;
+  uint8 notifyApp = 0xFF;
 
-    if (pAttr->type.len == ATT_BT_UUID_SIZE) {
-        // 16-bit UUID
-        uint16 uuid = BUILD_UINT16(pAttr->type.uuid[0], pAttr->type.uuid[1]);
-        switch (uuid) {
-            // Validate the value
-            // Make sure it's not a blob oper
-            /*
-            if ( offset == 0 )
-            {
-              if ( len != 1 )
-              {
-                status = ATT_ERR_INVALID_VALUE_SIZE;
-              }
-            }
-            else
-            {
-              status = ATT_ERR_ATTR_NOT_LONG;
-            }
+  if ( pAttr->type.len == ATT_BT_UUID_SIZE )
+  {
+    // 16-bit UUID
+    uint16 uuid = BUILD_UINT16( pAttr->type.uuid[0], pAttr->type.uuid[1]);
+    switch ( uuid )
+    {
+      case SIMPLEPROFILE_CHAR1_UUID:
+      case SIMPLEPROFILE_CHAR3_UUID:
 
-            //Write the value
-            if ( status == SUCCESS )
-            {
-              uint8 *pCurValue = (uint8 *)pAttr->pValue;
-              *pCurValue = pValue[0];
-
-              if( pAttr->pValue == &simpleProfileChar1 )
-              {
-                notifyApp = SIMPLEPROFILE_CHAR1;
-              }
-            }
-
-            break;
-            */
-        case SIMPLEPROFILE_CHAR3_UUID:
-            if (offset == 0) {
-                if (len > SIMPLEPROFILE_CHAR3_LEN) {
-                    status = ATT_ERR_INVALID_VALUE_SIZE;
-                }
-            } else {
-                status = ATT_ERR_ATTR_NOT_LONG;
-            }
-
-            // Write the value
-            if (status == SUCCESS) {
-                // Copy pValue into the variable we point to from the attribute table.
-                memcpy(pAttr->pValue + offset, pValue, len);
-                memset(pAttr->pValue + len, 0, SIMPLEPROFILE_CHAR3_LEN - len);
-
-                if (pAttr->pValue == simpleProfileChar3) {
-                    notifyApp = SIMPLEPROFILE_CHAR3;
-                }
-            }
-
-            break;
-        case GATT_CLIENT_CHAR_CFG_UUID:
-            status = GATTServApp_ProcessCCCWriteReq(connHandle, pAttr, pValue, len, offset, GATT_CLIENT_CFG_NOTIFY);
-            break;
-        default:
-            // Should never get here! (characteristics 2 and 4 do not have write permissions)
-            status = ATT_ERR_ATTR_NOT_FOUND;
-            break;
+        //Validate the value
+        // Make sure it's not a blob oper
+        if ( offset == 0 )
+        {
+          if ( len > SIMPLEPROFILE_CHAR3_LEN )
+          {
+            status = ATT_ERR_INVALID_VALUE_SIZE;
+          }
+        }
+        else
+        {
+          status = ATT_ERR_ATTR_NOT_LONG;
         }
-    } else {
-        // 128-bit UUID
-        status = ATT_ERR_INVALID_HANDLE;
-    }
 
-    // If a characteristic value changed then callback function to notify application of change
-    if ((notifyApp != 0xFF) && simpleProfile_AppCBs && simpleProfile_AppCBs->pfnSimpleProfileChange) {
-        simpleProfile_AppCBs->pfnSimpleProfileChange(notifyApp);
-    }
+        //Write the value
+        if ( status == SUCCESS )
+        {
+          uint8 *pCurValue = (uint8 *)pAttr->pValue;
+          *pCurValue = pValue[0];
 
-    return (status);
+          // Copy pValue into the variable we point to from the attribute table.
+          memcpy(pAttr->pValue + offset, pValue, len);
+          memset(pAttr->pValue + len, 0, SIMPLEPROFILE_CHAR3_LEN - len);
+
+          if( pAttr->pValue == simpleProfileChar1 )
+          {
+            notifyApp = SIMPLEPROFILE_CHAR1;
+          }
+          else
+          {
+            notifyApp = SIMPLEPROFILE_CHAR3;
+          }
+        }
+
+        break;
+
+      case GATT_CLIENT_CHAR_CFG_UUID:
+        status = GATTServApp_ProcessCCCWriteReq( connHandle, pAttr, pValue, len,
+                                                 offset, GATT_CLIENT_CFG_NOTIFY );
+        break;
+
+      default:
+        // Should never get here! (characteristics 2 and 4 do not have write permissions)
+        status = ATT_ERR_ATTR_NOT_FOUND;
+        break;
+    }
+  }
+  else
+  {
+    // 128-bit UUID
+    status = ATT_ERR_INVALID_HANDLE;
+  }
+
+  // If a characteristic value changed then callback function to notify application of change
+  if ( (notifyApp != 0xFF ) && simpleProfile_AppCBs && simpleProfile_AppCBs->pfnSimpleProfileChange )
+  {
+    simpleProfile_AppCBs->pfnSimpleProfileChange( notifyApp );
+  }
+
+  return ( status );
 }
 
 /*********************************************************************

simplelink/ble_sdk_2_02_02_25/src/profiles/simple_profile/simple_gatt_profile.h

@@ -56,7 +56,7 @@ extern "C"
 /*********************************************************************
  * INCLUDES
  */
-
+// #include "application_config/application_config.h"
 /*********************************************************************
  * CONSTANTS
  */
@@ -81,12 +81,24 @@ extern "C"
 // Simple Keys Profile Services bit fields
 #define SIMPLEPROFILE_SERVICE               0x00000001
 
+#ifndef CUSTOM_GATT_LENGTH
 // Length of Characteristic 5 in bytes
 #define SIMPLEPROFILE_CHAR5_LEN           5
-/*user insert*/
 #define SIMPLEPROFILE_CHAR4_LEN           20
 #define SIMPLEPROFILE_CHAR3_LEN           20
 #define SIMPLEPROFILE_CHAR2_LEN           20
+#define SIMPLEPROFILE_CHAR1_LEN           20
+#else
+/*user insert*/
+#define SIMPLEPROFILE_CHAR5_LEN           5
+#define SIMPLEPROFILE_CHAR4_LEN           BLE_DAT_BUFF_SIZE
+#define SIMPLEPROFILE_CHAR3_LEN           BLE_INS_BUFF_SIZE
+#define SIMPLEPROFILE_CHAR2_LEN           BLE_CIS_BUFF_SIZE
+#define SIMPLEPROFILE_CHAR1_LEN           20
+#define BLE_CIS_BUFF_CHAR                 SIMPLEPROFILE_CHAR2
+#define BLE_INS_BUFF_CHAR                 SIMPLEPROFILE_CHAR3
+#define BLE_DAT_BUFF_CHAR                 SIMPLEPROFILE_CHAR4
+#endif
 /*********************************************************************
  * TYPEDEFS
  */