update cali script

ship version(0.2mV)
don't care
2020-03-16 17:13:32 +08:00 · 2020-02-25 18:32:13 +08:00 · 2020-02-25 10:38:03 +08:00 · 2020-02-25 10:08:58 +08:00 · 2020-02-21 17:57:26 +08:00 · 2020-02-21 15:57:15 +08:00
36 changed files with 5112 additions and 1430 deletions
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+    <configuration XML_version="1.2" id="configuration_0">
+        <instance XML_version="1.2" desc="Texas Instruments XDS100v3 USB Debug Probe" href="connections/TIXDS100v3_Dot7_Connection.xml" id="Texas Instruments XDS100v3 USB Debug Probe" xml="TIXDS100v3_Dot7_Connection.xml" xmlpath="connections"/>
+        <connection XML_version="1.2" id="Texas Instruments XDS100v3 USB Debug Probe">
+            <instance XML_version="1.2" href="drivers/tixds100v2icepick_c.xml" id="drivers" xml="tixds100v2icepick_c.xml" xmlpath="drivers"/>
+            <instance XML_version="1.2" href="drivers/tixds100v2cs_dap.xml" id="drivers" xml="tixds100v2cs_dap.xml" xmlpath="drivers"/>
+            <instance XML_version="1.2" href="drivers/tixds100v2cortexM.xml" id="drivers" xml="tixds100v2cortexM.xml" xmlpath="drivers"/>
+            <property Type="choicelist" Value="2" id="The Converter Usage">
+                <choice Name="Generate 1149.7 2-pin advanced modes" value="enable">
+                    <property Type="choicelist" Value="1" id="The Converter 1149.7 Frequency">
+                        <choice Name="Overclock with user specified value" value="unused">
+                            <property Type="choicelist" Value="5" id="-- Choose a value from 1.0MHz to 50.0MHz"/>
+                        </choice>
+                    </property>
+                    <property Type="choicelist" Value="5" id="The Target Scan Format"/>
+                </choice>
+            </property>
+            <platform XML_version="1.2" id="platform_0">
+                <instance XML_version="1.2" desc="CC2640F128" href="devices/cc2640f128.xml" id="CC2640F128" xml="cc2640f128.xml" xmlpath="devices"/>
+            </platform>
+        </connection>
+    </configuration>
+</configurations>
@@ -0,0 +1,9 @@
+The 'targetConfigs' folder contains target-configuration (.ccxml) files, automatically generated based
+on the device and connection settings specified in your project on the Properties > General page.
+
+Please note that in automatic target-configuration management, changes to the project's device and/or
+connection settings will either modify an existing or generate a new target-configuration file. Thus,
+if you manually edit these auto-generated files, you may need to re-apply your changes. Alternatively,
+you may create your own target-configuration file for this project and manage it manually. You can
+always switch back to automatic target-configuration management by checking the "Manage the project's
+target-configuration automatically" checkbox on the project's Properties > General page.
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<configurations XML_version="1.2" id="configurations_0">
+    <configuration XML_version="1.2" id="configuration_0">
+        <instance XML_version="1.2" desc="Texas Instruments XDS100v3 USB Debug Probe" href="connections/TIXDS100v3_Dot7_Connection.xml" id="Texas Instruments XDS100v3 USB Debug Probe" xml="TIXDS100v3_Dot7_Connection.xml" xmlpath="connections"/>
+        <connection XML_version="1.2" id="Texas Instruments XDS100v3 USB Debug Probe">
+            <instance XML_version="1.2" href="drivers/tixds100v2icepick_c.xml" id="drivers" xml="tixds100v2icepick_c.xml" xmlpath="drivers"/>
+            <instance XML_version="1.2" href="drivers/tixds100v2cs_dap.xml" id="drivers" xml="tixds100v2cs_dap.xml" xmlpath="drivers"/>
+            <instance XML_version="1.2" href="drivers/tixds100v2cortexM.xml" id="drivers" xml="tixds100v2cortexM.xml" xmlpath="drivers"/>
+            <property Type="choicelist" Value="2" id="The Converter Usage">
+                <choice Name="Generate 1149.7 2-pin advanced modes" value="enable">
+                    <property Type="choicelist" Value="1" id="The Converter 1149.7 Frequency">
+                        <choice Name="Overclock with user specified value" value="unused">
+                            <property Type="choicelist" Value="5" id="-- Choose a value from 1.0MHz to 50.0MHz"/>
+                        </choice>
+                    </property>
+                    <property Type="choicelist" Value="5" id="The Target Scan Format"/>
+                </choice>
+            </property>
+            <platform XML_version="1.2" id="platform_0">
+                <instance XML_version="1.2" desc="CC2640F128" href="devices/cc2640f128.xml" id="CC2640F128" xml="cc2640f128.xml" xmlpath="devices"/>
+            </platform>
+        </connection>
+    </configuration>
+</configurations>
@@ -0,0 +1,9 @@
+The 'targetConfigs' folder contains target-configuration (.ccxml) files, automatically generated based
+on the device and connection settings specified in your project on the Properties > General page.
+
+Please note that in automatic target-configuration management, changes to the project's device and/or
+connection settings will either modify an existing or generate a new target-configuration file. Thus,
+if you manually edit these auto-generated files, you may need to re-apply your changes. Alternatively,
+you may create your own target-configuration file for this project and manage it manually. You can
+always switch back to automatic target-configuration management by checking the "Manage the project's
+target-configuration automatically" checkbox on the project's Properties > General page.
@@ -9,6 +9,6 @@
 	<linkerCommandFile value="cc26x0f128.cmd"/>
 	<rts value="libc.a"/>
 	<createSlaveProjects value=""/>
-	<connection value="common/targetdb/connections/TIXDS100v3_Dot7_Connection.xml"/>
+	<connection value="common/targetdb/connections/TIXDS110_Connection.xml"/>
 	<isTargetManual value="false"/>
 </projectOptions>
@@ -15,8 +15,8 @@
 			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
 				<configuration artifactExtension="out" artifactName="${ProjName}" buildProperties="" cleanCommand="${CG_CLEAN_CMD}" description="" id="com.ti.ccstudio.buildDefinitions.TMS470.Default.1209999684" name="FlashROM" parent="com.ti.ccstudio.buildDefinitions.TMS470.Default" postannouncebuildStep="" postbuildStep="${CG_TOOL_HEX} -order MS --memwidth=8 --romwidth=8 --intel -o ${ProjName}.hex ${ProjName}.out;${TOOLS_BLE}/frontier/frontier.exe ccs ${PROJECT_LOC}/${ConfigName}/${ProjName}_linkInfo.xml ${ORG_PROJ_DIR}/../../ccs/config/ccs_compiler_defines.bcfg ${ORG_PROJ_DIR}/../../ccs/config/ccs_linker_defines.cmd" preannouncebuildStep="" prebuildStep="&quot;${TOOLS_BLE}/lib_search/lib_search.exe&quot; ${ORG_PROJ_DIR}/build_config.opt &quot;${TOOLS_BLE}/lib_search/params_split_cc2640.xml&quot; ${SRC_BLE_CORE}/../blelib &quot;${ORG_PROJ_DIR}/../../ccs/config/lib_linker.cmd&quot;">
 					<folderInfo id="com.ti.ccstudio.buildDefinitions.TMS470.Default.1209999684." name="/" resourcePath="">
-						<toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.DebugToolchain.929750171" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.linkerDebug.1008890994">
-							<option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.1479696404" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
+						<toolChain id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.DebugToolchain.958553711" name="TI Build Tools" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.DebugToolchain" targetTool="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.linkerDebug.2088015050">
+							<option id="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS.2112506999" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_TAGS" valueType="stringList">
 								<listOptionValue builtIn="false" value="DEVICE_CONFIGURATION_ID=Cortex M.CC2650F128"/>
 								<listOptionValue builtIn="false" value="DEVICE_ENDIANNESS=little"/>
 								<listOptionValue builtIn="false" value="OUTPUT_FORMAT=ELF"/>
@@ -26,17 +26,17 @@
 								<listOptionValue builtIn="false" value="LINKER_COMMAND_FILE="/>
 								<listOptionValue builtIn="false" value="OUTPUT_TYPE=executable"/>
 							</option>
-							<option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.201372544" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="18.1.4.LTS" valueType="string"/>
-							<targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.targetPlatformDebug.1951196199" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.targetPlatformDebug"/>
-							<builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.builderDebug.20903631" name="GNU Make.FlashROM" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.builderDebug"/>
-							<tool id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.compilerDebug.1176131016" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.compilerDebug">
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION.647279085" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION.7M3" valueType="enumerated"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE.1443871767" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE.16" valueType="enumerated"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI.227818129" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI.eabi" valueType="enumerated"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.LITTLE_ENDIAN.784155377" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL.494285153" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL.4" valueType="enumerated"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED.581550859" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED.0" valueType="enumerated"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.INCLUDE_PATH.1288777730" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.INCLUDE_PATH" valueType="includePath">
+							<option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.101349069" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="18.1.4.LTS" valueType="string"/>
+							<targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.targetPlatformDebug.572884961" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.targetPlatformDebug"/>
+							<builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.builderDebug.50794417" name="GNU Make.FlashROM" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.builderDebug"/>
+							<tool id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.compilerDebug.783335843" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.compilerDebug">
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION.341974501" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION.7M3" valueType="enumerated"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE.274225680" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE.16" valueType="enumerated"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI.529764162" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI.eabi" valueType="enumerated"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.LITTLE_ENDIAN.1837039616" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL.1393115220" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL.4" valueType="enumerated"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED.2112471580" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED.0" valueType="enumerated"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.INCLUDE_PATH.152832201" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.INCLUDE_PATH" valueType="includePath">
 									<listOptionValue builtIn="false" value="${CG_TOOL_ROOT}/include"/>
 									<listOptionValue builtIn="false" value="${SRC_EX}/examples/simple_peripheral/cc26xx/stack"/>
 									<listOptionValue builtIn="false" value="${SRC_EX}/common/cc26xx"/>
@@ -60,7 +60,7 @@
 									<listOptionValue builtIn="false" value="${SRC_EX}/profiles/roles"/>
 									<listOptionValue builtIn="false" value="${CC26XXWARE}"/>
 								</option>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEFINE.986125825" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEFINE" valueType="definedSymbols">
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEFINE.1361895403" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEFINE" valueType="definedSymbols">
 									<listOptionValue builtIn="false" value="CC26XX"/>
 									<listOptionValue builtIn="false" value="POWER_SAVING"/>
 									<listOptionValue builtIn="false" value="CC26XXWARE"/>
@@ -81,60 +81,60 @@
 									<listOptionValue builtIn="false" value="xTESTMODES"/>
 									<listOptionValue builtIn="false" value="xTEST_BLEBOARD"/>
 								</option>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT.372638078" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT.C99" valueType="enumerated"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_SUPPRESS.201347726" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_SUPPRESS" valueType="stringList">
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT.1555958931" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT.C99" valueType="enumerated"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_SUPPRESS.1144396572" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_SUPPRESS" valueType="stringList">
 									<listOptionValue builtIn="false" value="48"/>
 									<listOptionValue builtIn="false" value="16004"/>
 								</option>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WARNING.73314177" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WARNING" valueType="stringList">
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WARNING.1546809951" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WARNING" valueType="stringList">
 									<listOptionValue builtIn="false" value="225"/>
 								</option>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP.1126279750" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DISPLAY_ERROR_NUMBER.1492280006" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CMD_FILE.538453952" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CMD_FILE" valueType="stringList">
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP.12083718" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DISPLAY_ERROR_NUMBER.1432753391" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CMD_FILE.1345637669" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CMD_FILE" valueType="stringList">
 									<listOptionValue builtIn="false" value="${SRC_EX}/config/build_components.opt"/>
 									<listOptionValue builtIn="false" value="${ORG_PROJ_DIR}/build_config.opt"/>
 								</option>
-								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__C_SRCS.313905687" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__C_SRCS"/>
-								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__CPP_SRCS.1129729173" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__CPP_SRCS"/>
-								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__ASM_SRCS.156783227" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__ASM_SRCS"/>
-								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__ASM2_SRCS.538375181" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__ASM2_SRCS"/>
+								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__C_SRCS.1884548091" name="C Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__C_SRCS"/>
+								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__CPP_SRCS.682104615" name="C++ Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__CPP_SRCS"/>
+								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__ASM_SRCS.662317863" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__ASM_SRCS"/>
+								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__ASM2_SRCS.728508440" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__ASM2_SRCS"/>
 							</tool>
-							<tool id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.linkerDebug.1008890994" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.linkerDebug">
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.STACK_SIZE.1873600405" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.STACK_SIZE" value="256" valueType="string"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.HEAP_SIZE.1359172875" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.HEAP_SIZE" value="0" valueType="string"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.MAP_FILE.1355177509" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.MAP_FILE" value="&quot;${ProjName}.map&quot;" valueType="string"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.OUTPUT_FILE.829303802" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.OUTPUT_FILE" value="${ProjName}.out" valueType="string"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.LIBRARY.1078356909" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.LIBRARY" valueType="libs">
+							<tool id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.linkerDebug.2088015050" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.linkerDebug">
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.STACK_SIZE.1079333148" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.STACK_SIZE" value="256" valueType="string"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.HEAP_SIZE.1347544490" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.HEAP_SIZE" value="0" valueType="string"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.MAP_FILE.136883143" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.MAP_FILE" value="&quot;${ProjName}.map&quot;" valueType="string"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.OUTPUT_FILE.1510359183" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.OUTPUT_FILE" value="${ProjName}.out" valueType="string"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.LIBRARY.1331488920" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.LIBRARY" valueType="libs">
 									<listOptionValue builtIn="false" value="libc.a"/>
 									<listOptionValue builtIn="false" value="${ORG_PROJ_DIR}/../../ccs/config/lib_linker.cmd"/>
 									<listOptionValue builtIn="false" value="${ROM}/ble_rom_releases/04242014/ble_rom_patch.symbols"/>
 									<listOptionValue builtIn="false" value="${CC26XXWARE}/driverlib/bin/ccs/driverlib.lib"/>
 								</option>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.SEARCH_PATH.1707930214" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.SEARCH_PATH" valueType="libPaths">
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.SEARCH_PATH.1835383942" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.SEARCH_PATH" valueType="libPaths">
 									<listOptionValue builtIn="false" value="${CG_TOOL_ROOT}/lib"/>
 									<listOptionValue builtIn="false" value="${CG_TOOL_ROOT}/include"/>
 								</option>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_SUPPRESS.59164041" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_SUPPRESS" valueType="stringList">
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_SUPPRESS.821225577" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_SUPPRESS" valueType="stringList">
 									<listOptionValue builtIn="false" value="16002-D"/>
 									<listOptionValue builtIn="false" value="10247-D"/>
 									<listOptionValue builtIn="false" value="10325-D"/>
 									<listOptionValue builtIn="false" value="10229-D"/>
 								</option>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP.11567165" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DISPLAY_ERROR_NUMBER.1727810233" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.XML_LINK_INFO.1385277262" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.XML_LINK_INFO" value="&quot;${ProjName}_linkInfo.xml&quot;" valueType="string"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.ENTRY_POINT.1153340314" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.ENTRY_POINT" value="startup_entry" valueType="string"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF.450995330" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF.on" valueType="enumerated"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION.1827942626" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION.on" valueType="enumerated"/>
-								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD_SRCS.1279238428" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD_SRCS"/>
-								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD2_SRCS.526125450" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD2_SRCS"/>
-								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__GEN_CMDS.581803256" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__GEN_CMDS"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP.1390204935" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DISPLAY_ERROR_NUMBER.1601082213" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.XML_LINK_INFO.351715800" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.XML_LINK_INFO" value="&quot;${ProjName}_linkInfo.xml&quot;" valueType="string"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.ENTRY_POINT.90863272" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.ENTRY_POINT" value="startup_entry" valueType="string"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF.1779672459" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF.on" valueType="enumerated"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION.1701763005" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION.on" valueType="enumerated"/>
+								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD_SRCS.687564793" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD_SRCS"/>
+								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD2_SRCS.1056923280" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD2_SRCS"/>
+								<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__GEN_CMDS.73723664" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__GEN_CMDS"/>
 							</tool>
-							<tool id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.947560992" name="ARM Hex Utility" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex">
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.ROMWIDTH.1295209583" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.ROMWIDTH" value="8" valueType="string"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.MEMWIDTH.110293046" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.MEMWIDTH" value="8" valueType="string"/>
-								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT.1122561921" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT.INTEL" valueType="enumerated"/>
+							<tool id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.1766088709" name="ARM Hex Utility" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex">
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.ROMWIDTH.494132983" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.ROMWIDTH" value="8" valueType="string"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.MEMWIDTH.1603693219" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.MEMWIDTH" value="8" valueType="string"/>
+								<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT.1153492005" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT.INTEL" valueType="enumerated"/>
 							</tool>
 						</toolChain>
 					</folderInfo>
@@ -12,6 +12,7 @@
 <stringAttribute key="com.ti.ccstudio.debug.debugModel.ATTR_TARGET_CONFIG" value="${target_config_active_default:simple_peripheral_cc2650em_stack}"/>
 <stringAttribute key="com.ti.ccstudio.debug.debugModel.MRU_PROGRAM.C:\ti\simplelink\ble_sdk_2_02_02_25\examples\cc2650em\simple_peripheral\ccs\stack\targetConfigs\CC2650F128.ccxml.Texas Instruments XDS100v3 USB Debug Probe_0/Cortex_M3_0" value="C:/ti\simplelink\ble_sdk_2_02_02_25\examples\cc2650em\simple_peripheral\ccs\stack\FlashROM\simple_peripheral_cc2650em_stack.out"/>
 <stringAttribute key="com.ti.ccstudio.debug.debugModel.MRU_PROGRAM.C:\ti\simplelink\ble_sdk_2_02_02_25\examples\cc2650em\simple_peripheral\ccs\stack\targetConfigs\CC2650F128.ccxml.Texas Instruments XDS110 USB Debug Probe/Cortex_M3_0" value="C:/ti\simplelink\ble_sdk_2_02_02_25\examples\cc2650em\simple_peripheral\ccs\stack\FlashROM\simple_peripheral_cc2650em_stack.out"/>
+<stringAttribute key="com.ti.ccstudio.debug.debugModel.MRU_PROGRAM.C:\ti\simplelink\ble_sdk_2_02_02_25\examples\cc2650em\simple_peripheral\ccs\stack\targetConfigs\CC2650F128.ccxml.Texas Instruments XDS110 USB Debug Probe_0/Cortex_M3_0" value="C:/ti\simplelink\ble_sdk_2_02_02_25\examples\cc2650em\simple_peripheral\ccs\stack\FlashROM\simple_peripheral_cc2650em_stack.out"/>
 <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
 <listEntry value="/simple_peripheral_cc2650em_stack"/>
 </listAttribute>
@@ -1,19 +1,20 @@
 <?xml version="1.0" encoding="UTF-8" standalone="no"?>
 <configurations XML_version="1.2" id="configurations_0">
-<configuration XML_version="1.2" id="Texas Instruments XDS100v3 USB Debug Probe_0">
-        <instance XML_version="1.2" desc="Texas Instruments XDS100v3 USB Debug Probe_0" href="connections/TIXDS100v3_Dot7_Connection.xml" id="Texas Instruments XDS100v3 USB Debug Probe_0" xml="TIXDS100v3_Dot7_Connection.xml" xmlpath="connections"/>
-        <connection XML_version="1.2" id="Texas Instruments XDS100v3 USB Debug Probe_0">
-            <instance XML_version="1.2" href="drivers/tixds100v2icepick_c.xml" id="drivers" xml="tixds100v2icepick_c.xml" xmlpath="drivers"/>
-            <instance XML_version="1.2" href="drivers/tixds100v2cs_dap.xml" id="drivers" xml="tixds100v2cs_dap.xml" xmlpath="drivers"/>
-            <instance XML_version="1.2" href="drivers/tixds100v2cortexM.xml" id="drivers" xml="tixds100v2cortexM.xml" xmlpath="drivers"/>
-            <property Type="choicelist" Value="2" id="The Converter Usage">
-                <choice Name="Generate 1149.7 2-pin advanced modes" value="enable">
-                    <property Type="choicelist" Value="1" id="The Converter 1149.7 Frequency">
-                        <choice Name="Overclock with user specified value" value="unused">
-                            <property Type="choicelist" Value="5" id="-- Choose a value from 1.0MHz to 50.0MHz"/>
-                        </choice>
-                    </property>
-                    <property Type="choicelist" Value="5" id="The Target Scan Format"/>
+<configuration XML_version="1.2" id="Texas Instruments XDS110 USB Debug Probe_0">
+        <instance XML_version="1.2" desc="Texas Instruments XDS110 USB Debug Probe_0" href="connections/TIXDS110_Connection.xml" id="Texas Instruments XDS110 USB Debug Probe_0" xml="TIXDS110_Connection.xml" xmlpath="connections"/>
+        <connection XML_version="1.2" id="Texas Instruments XDS110 USB Debug Probe_0">
+            <instance XML_version="1.2" href="drivers/tixds510icepick_c.xml" id="drivers" xml="tixds510icepick_c.xml" xmlpath="drivers"/>
+            <instance XML_version="1.2" href="drivers/tixds510cs_dap.xml" id="drivers" xml="tixds510cs_dap.xml" xmlpath="drivers"/>
+            <instance XML_version="1.2" href="drivers/tixds510cortexM.xml" id="drivers" xml="tixds510cortexM.xml" xmlpath="drivers"/>
+            <property Type="choicelist" Value="1" id="Power Selection">
+                <choice Name="Probe supplied power" value="1">
+                    <property Type="stringfield" Value="3.3" id="Voltage Level"/>
+                </choice>
+            </property>
+            <property Type="choicelist" Value="0" id="JTAG Signal Isolation"/>
+            <property Type="choicelist" Value="4" id="SWD Mode Settings">
+                <choice Name="cJTAG (1149.7) 2-pin advanced modes" value="enable">
+                    <property Type="choicelist" Value="1" id="XDS110 Aux Port"/>
                </choice>
            </property>
            <platform XML_version="1.2" id="platform_0">
@@ -62,24 +62,29 @@ static void ADC_read(uint8_t *ADCdata){

 static void ADCGainControl(uint8_t ADCLevel){
    if(ADCLevel == 0){
-        // ADC gain level = 0, using 200R resister
+        // ADC gain level = 0, using 200K resister
        PIN_setOutputValue(pin_handle, Turnon10K, 0);
-        PIN_setOutputValue(pin_handle, Turnon100R, 0);
+        PIN_setOutputValue(pin_handle, Turnon200R, 0);
    }
    else if(ADCLevel == 1){
        // ADC gain level = 1, using 10K resister
        PIN_setOutputValue(pin_handle, Turnon10K, 1);
-        PIN_setOutputValue(pin_handle, Turnon100R, 0);
+        PIN_setOutputValue(pin_handle, Turnon200R, 0);
    }
    else if(ADCLevel == 2){
-        // ADC gain level = 2, using 100R resister
+        // ADC gain level = 2, using 200R resister
        PIN_setOutputValue(pin_handle, Turnon10K, 0);
-        PIN_setOutputValue(pin_handle, Turnon100R, 1);
+        PIN_setOutputValue(pin_handle, Turnon200R, 1);
+    }
+    else if(ADCLevel == 3){
+        // ADC gain level = 0, auto gain (using 200R resister)
+        PIN_setOutputValue(pin_handle, Turnon10K, 0);
+        PIN_setOutputValue(pin_handle, Turnon200R, 1);
    }
    else{
        // default using 200R resister
        PIN_setOutputValue(pin_handle, Turnon10K, 0);
-        PIN_setOutputValue(pin_handle, Turnon100R, 0);
+        PIN_setOutputValue(pin_handle, Turnon200R, 1);
    }
 }

@@ -121,4 +126,216 @@ static void ADCChannelSelect(uint8_t ADCChannel){
    }
 }

+static void ReadVolt(uint8_t *buf){
+    // Read data twice since the first data we get is previous data
+    ADCChannelSelect(ADC_CH_VOLT);
+    CPUdelay(10);
+    ADC_read(buf);
+
+    ADCChannelSelect(ADC_CH_VOLT);
+    CPUdelay(10);
+    ADC_read(buf);
+}
+
+static void ReadVoutVolt(uint8_t *buf){
+    // Read data twice since the first data we get is previous data
+    ADCChannelSelect(ADC_CH_DAC);
+    CPUdelay(10);
+    ADC_read(buf);
+
+    ADCChannelSelect(ADC_CH_DAC);
+    CPUdelay(10);
+    ADC_read(buf);
+}
+
+static void ReadCurrent(uint8_t *buf){
+    // Read data twice since the first data we get is previous data
+    ADCGainControl(INSTRUCTION.ADCGainLevel);
+    ADCChannelSelect(ADC_CH_CURRENT);
+    CPUdelay(10);
+    ADC_read(buf);
+
+    ADCChannelSelect(ADC_CH_CURRENT);
+    CPUdelay(10);
+    ADC_read(buf);
+}
+
+static void ReadBatVolt(uint8_t *buf){
+    // Read data twice since the first data we get is previous data
+    ADCChannelSelect(ADC_CH_BAT);
+    CPUdelay(10);
+    ADC_read(buf);
+
+    ADCChannelSelect(ADC_CH_BAT);
+    CPUdelay(10);
+    ADC_read(buf);
+}
+
+// theoretical boundary <20, 10~500, >100 (uA)
+#define GAIN_SMALL_BOUNDARY 40000  // 40 uA = 40,000,000 pA
+#define GAIN_MID_BOUNDARY1  20000  // 20 uA = 20,000,000 pA
+#define GAIN_MID_BOUNDARY2  400000 // 400 uA = 400,000,000 pA
+#define GAIN_LARGE_BOUNDARY 200000 // 200 uA = 200,000 nA
+
+//#define GAIN_SMALL_BOUNDARY 8000  // 8 uA = 8,000,000 pA
+//#define GAIN_MID_BOUNDARY1  3000  // 3 uA = 3,000,000 pA
+//#define GAIN_MID_BOUNDARY2  90000 // 90 uA = 90,000,000 pA
+//#define GAIN_LARGE_BOUNDARY 70000 // 70 uA = 70,000 nA
+
+
+static int32_t AutoGainReadCurrent(uint8_t *buf){
+    int32_t Real_Current = 0;
+
+    if(INSTRUCTION.ADCGainLevel == GAIN_AUTO){
+        INSTRUCTION.ADCGainLevel = GAIN_200R;
+    }
+
+    if(INSTRUCTION.ADCGainLevel == GAIN_200R){
+        uint8_t CurrentCount1 = 0;
+        while(CurrentCount1 < 5){
+            ReadCurrent(spi_ADC_rxbuf);
+            CurrentCount1++;
+            if(CurrentCount1 == 5){
+                ReadCurrent(spi_ADC_rxbuf);
+                Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+                break;
+            }
+        }
+
+        // switch to mid range current
+        if(Real_Current < GAIN_LARGE_BOUNDARY && Real_Current > -1*GAIN_LARGE_BOUNDARY){
+            uint8_t CurrentCount = 0;
+            // switch to small range current
+            if (Real_Current < GAIN_MID_BOUNDARY1 && Real_Current > -1*GAIN_MID_BOUNDARY1){
+                INSTRUCTION.ADCGainLevel = GAIN_200K;
+                while(CurrentCount < 5){
+                    ReadCurrent(spi_ADC_rxbuf);
+                    CurrentCount++;
+                    if(CurrentCount == 5){
+                        ReadCurrent(spi_ADC_rxbuf);
+                        Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+                        break;
+                    }
+                }
+            }else{
+                CurrentCount = 0;
+                INSTRUCTION.ADCGainLevel = GAIN_10K;
+                while(CurrentCount < 5){
+                    ReadCurrent(spi_ADC_rxbuf);
+                    CurrentCount++;
+                    if(CurrentCount == 5){
+                        ReadCurrent(spi_ADC_rxbuf);
+                        Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+                        break;
+                    }
+                }
+            }
+
+//            LED_color(DARKLED, 0x00, 0xFF, 0x00);
+
+//            // switch to small range current
+//            if (Real_Current < GAIN_MID_BOUNDARY1 && Real_Current > -1*GAIN_MID_BOUNDARY1){
+//                INSTRUCTION.ADCGainLevel = GAIN_200K;
+//                ReadCurrent(spi_ADC_rxbuf);
+//                Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+//                LED_color(DARKLED, 0xFF, 0x00, 0x00);
+//            }
+        }
+    }
+    else if(INSTRUCTION.ADCGainLevel == GAIN_10K){
+        uint8_t CurrentCount1 = 0;
+        while(CurrentCount1 < 3){
+            ReadCurrent(spi_ADC_rxbuf);
+            CurrentCount1++;
+            if(CurrentCount1 == 3){
+                ReadCurrent(spi_ADC_rxbuf);
+                Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+                break;
+            }
+        }
+
+        // switch to large range current
+        if(Real_Current > GAIN_MID_BOUNDARY2 || Real_Current < -1*GAIN_MID_BOUNDARY2){
+            uint8_t CurrentCount = 0;
+            INSTRUCTION.ADCGainLevel = GAIN_200R;
+            while(CurrentCount < 3){
+                ReadCurrent(spi_ADC_rxbuf);
+                CurrentCount++;
+                if(CurrentCount == 3){
+                    ReadCurrent(spi_ADC_rxbuf);
+                    Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+                    break;
+                }
+            }
+        }
+
+        // switch to small range current
+        else if (Real_Current < GAIN_MID_BOUNDARY1 && Real_Current > -1*GAIN_MID_BOUNDARY1){
+            uint8_t CurrentCount = 0;
+            INSTRUCTION.ADCGainLevel = GAIN_200K;
+            while(CurrentCount < 3){
+                ReadCurrent(spi_ADC_rxbuf);
+                CurrentCount++;
+                if(CurrentCount == 3){
+                    ReadCurrent(spi_ADC_rxbuf);
+                    Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+                    break;
+                }
+            }
+        }
+    }
+    else if(INSTRUCTION.ADCGainLevel == GAIN_200K){
+        uint8_t CurrentCount1 = 0;
+        while(CurrentCount1 < 5){
+            ReadCurrent(spi_ADC_rxbuf);
+            CurrentCount1++;
+            if(CurrentCount1 == 5){
+                ReadCurrent(spi_ADC_rxbuf);
+                Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+                break;
+            }
+        }
+        //Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+
+        // switch to mid range current
+        if(Real_Current > GAIN_SMALL_BOUNDARY || Real_Current < -1*GAIN_SMALL_BOUNDARY){
+            uint8_t CurrentCount = 0;
+            // switch to large range current
+            if(Real_Current > GAIN_MID_BOUNDARY2 || Real_Current < -1*GAIN_MID_BOUNDARY2){
+                INSTRUCTION.ADCGainLevel = GAIN_200R;
+                while(CurrentCount < 5){
+                    ReadCurrent(spi_ADC_rxbuf);
+                    CurrentCount++;
+                    if(CurrentCount == 5){
+                        ReadCurrent(spi_ADC_rxbuf);
+                        Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+                        break;
+                    }
+                }
+            }else{
+                CurrentCount = 0;
+                INSTRUCTION.ADCGainLevel = GAIN_10K;
+                while(CurrentCount < 5){
+                    ReadCurrent(spi_ADC_rxbuf);
+                    CurrentCount++;
+                    if(CurrentCount == 5){
+                        ReadCurrent(spi_ADC_rxbuf);
+                        Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+                        break;
+                    }
+                }
+            }
+
+
+           // switch to large range current
+//           if(Real_Current > GAIN_MID_BOUNDARY2 || Real_Current < -1*GAIN_MID_BOUNDARY2){
+//               INSTRUCTION.ADCGainLevel = GAIN_200R;
+//               ReadCurrent(spi_ADC_rxbuf);
+//               Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+//           }
+       }
+    }
+    return Real_Current;
+}
+
 #endif
@@ -0,0 +1,32 @@
+
+#ifndef ELITECCC
+#define ELITECCC
+
+#include "EliteCCMode.h"
+
+
+// XXX : should we reset DAC output after STOP?
+static void CCModeReverseCurrent(CCCMode *CCC){
+    if(CCC->StandBy){
+        if(CT.StandByCounter == CCC->StandByTime){
+            CCC->StandBy = false;
+            CT.StandByCounter = 0;
+        }
+        else{
+            CT.StandByCounter ++;
+        }
+    }
+    else{
+        // reverse charge/discharge
+        if(CCC->BatteryV == CCC->VMax){
+            CCC->StandBy = true;
+            CCC->value = CCC->DischargeCurrent;
+        }
+        else if(CCC->BatteryV == CCC->VMin){
+            CCC->StandBy = true;
+            CCC->value = CCC->ChargeCurrent;
+        }
+    }
+}
+
+#endif
@@ -0,0 +1,132 @@
+
+#ifndef ELITECCMODE
+#define ELITECCMODE
+
+static void CCModeDACControl(CCMode *CC, int32_t IUC_Measure_Difference);
+
+static int32_t CCModeReadCurrent(CCMode *CC){
+
+    static uint8_t VoltCurrentSwitch = 0;
+
+    CCModeDACEnable = 1;    // This flag will control DAC working
+
+    // decode ADC value and put it into notify buffer
+    // Use 5-th measure value as real-measure value
+    // because some value in the begin are garbage
+    if(VoltCurrentSwitch < 5){
+        ReadCurrent(spi_ADC_rxbuf);
+        VoltCurrentSwitch ++;
+    }
+    else if(VoltCurrentSwitch == 5){
+        // read current
+        if(INSTRUCTION.AutoGainEnable){
+            CC->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+        }
+        else{
+            ReadCurrent(spi_ADC_rxbuf);
+            CC->_MeasureData = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+        }
+        VoltCurrentSwitch ++;
+    }
+    else if(VoltCurrentSwitch <10){
+        // read volt
+        ReadVolt(spi_ADC_rxbuf);
+        VoltCurrentSwitch++;
+    }
+    else if(VoltCurrentSwitch == 10){
+        /** read battery voltage **/
+        ReadVolt(spi_ADC_rxbuf);
+        CC->BatteryV = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_VOLT, spi_ADC_rxbuf);
+
+        // if Iin have a offset if current !=0
+        CC->BatteryV = CC->BatteryV - (CC->value - CC_ZERO_POINT)*10/1e5;   // I_set * 10R = V_Iin2GND (mA * ohm)
+        VoltCurrentSwitch++;
+//        NotifyReady = true;
+    }
+    else{
+        VoltCurrentSwitch = 0;
+    }
+    NotifyVolt[0] = (uint8_t) (CC->BatteryV >> 24);
+    NotifyVolt[1] = (uint8_t) ((CC->BatteryV & 0x00FF0000) >> 16);
+    NotifyVolt[2] = (uint8_t) ((CC->BatteryV & 0x0000FF00) >> 8);
+    NotifyVolt[3] = (uint8_t) (CC->BatteryV & 0x000000FF);
+    return CC->_MeasureData;
+}
+
+static int32_t CCModeVoltOut(CCMode *CC){
+    int32_t IUCCurrent = 0;
+
+    if(!CCModeDACEnable){
+        // DAC should not work now
+        return 0;
+    }
+    IUCCurrent = CC->_Transform2RealnA( (struct CCModePara *) CC);
+
+    CCModeDACControl(CC, IUCCurrent - CC->_MeasureData);
+
+    CCModeDACEnable = 0;
+    return CC->_MeasureData;
+}
+
+static void CCModeDACControl(CCMode *CC, int32_t IUC_Measure_Difference){
+    int32_t step;
+
+    if(IUC_Measure_Difference < 300 && IUC_Measure_Difference > -300){
+        step = 0;
+    }
+    else if( CC->Charge && CC->BatteryV >= ( (int32_t) (CC->VMax - DAC_ZERO)/5 ) ){
+        CC->value = 0;
+        step = (IUC_Measure_Difference > 0) ? 1:-1;
+    }
+    else if( (!CC->Charge) && CC->BatteryV <= ( (int32_t) (CC->VMin - DAC_ZERO)/5 ) ){
+        // Ignore VMin condition
+        if(CC->Done < 25000){
+            CC->Done ++;
+            step = (IUC_Measure_Difference > 0) ? 2:-2;
+        }
+        // after ignore few second, active VMin condition
+        else{
+            CC->value = 0;
+            step = (IUC_Measure_Difference > 0) ? 1:-1;
+        }
+
+    }
+    else{
+        step = (IUC_Measure_Difference > 0) ? 1:-1;
+    }
+    // over/under flow
+    if( (INSTRUCTION.VoltConstant + step) > MAX_DAC_UC || (INSTRUCTION.VoltConstant + step) < MIN_DAC_UC ){
+        if(step > 0){
+            INSTRUCTION.VoltConstant = (INSTRUCTION.VoltConstant + MAX_DAC_UC)/2;
+        }
+        else{
+            INSTRUCTION.VoltConstant = (INSTRUCTION.VoltConstant + MIN_DAC_UC)/2;
+        }
+    }
+    else{
+        INSTRUCTION.VoltConstant = INSTRUCTION.VoltConstant + step;
+    }
+
+    DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoltConstant));
+
+//    step = CC->Done;
+//    NotifyImpedance[0] = (uint8_t) (step >> 24);
+//    NotifyImpedance[1] = (uint8_t) ((step & 0x00FF0000) >> 16);
+//    NotifyImpedance[2] = (uint8_t) ((step & 0x0000FF00) >> 8);
+//    NotifyImpedance[3] = (uint8_t) (step & 0x000000FF);
+}
+
+/* Transform setting CC into IUC
+*
+* User code in CC mode : 0 ~ 3000000
+* Real current value : -15.00000 ~ 15.00000 mA
+*  => user code = 1500000 mapping to 0.00000 mA
+*/
+static void CCCurrent2IUC(CCMode *CC){
+    int32_t CurrentValue = 0;
+
+    CC->value = INSTRUCTION.ConstantCurrent;
+    CurrentValue = CC->value - CC_ZERO_POINT;
+}
+
+#endif
@@ -0,0 +1,598 @@
+
+#ifndef ELITECV
+#define ELITECV
+
+static uint16_t SWVCurve(WorkMode *WorkModeData) {
+    static uint8_t  counter;
+    static uint16_t outputV;
+    static uint16_t Volt;
+    static bool     direction_up;
+
+    // reset origin volt at the begin
+    if (DACReset) {
+        Volt    = INSTRUCTION.VoltOrigin;
+        outputV = INSTRUCTION.VoltOrigin;
+        if (INSTRUCTION.VoltOrigin < INSTRUCTION.VoltFinal)
+            direction_up = true;
+        else
+            direction_up = false;
+        counter  = 1;
+        DACReset = false;
+    }
+
+    if (counter == 2 * PulseWidth)
+        counter = 1;
+    else
+        counter++;
+
+    // output a certain volt
+    outputV = Volt;
+    DAC_outputV(outputV);
+
+    // VoltValue = (ramp1*16 + ramp0/16) * 3.05;
+
+    // check if we reach the final volt
+    if ((outputV >= INSTRUCTION.VoltFinal && direction_up) || (outputV <= INSTRUCTION.VoltFinal && !direction_up)) {
+        PeriodicEvent = false;
+        DACReset      = true;
+    }
+
+    // prepare the next output volt
+    if (direction_up) {
+        if (counter == PulseWidth)
+            Volt = Volt + Amplitude;
+        else if (counter == 2 * PulseWidth)
+            Volt = Volt - (Amplitude - INSTRUCTION.Step);
+        else
+            Volt = Volt;
+    } else {
+        if (counter == PulseWidth)
+            Volt = Volt - Amplitude;
+        else if (counter == 2 * PulseWidth)
+            Volt = Volt + (Amplitude - INSTRUCTION.Step);
+        else
+            Volt = Volt;
+    }
+
+    return outputV;
+}
+
+static uint16_t DPVCurve(WorkMode *WorkModeData) {
+    static uint8_t  counter;
+    static uint16_t Volt1;
+    static uint16_t Volt2;
+    static uint16_t outputV;
+    static bool     direction_up;
+
+    // reset origin volt at the begin
+    if (DACReset) {
+        if (INSTRUCTION.VoltOrigin < INSTRUCTION.VoltFinal)
+            direction_up = true;
+        else
+            direction_up = false;
+
+        Volt1 = INSTRUCTION.VoltOrigin;
+        if (direction_up)
+            Volt2 = INSTRUCTION.VoltOrigin + Amplitude;
+        else
+            Volt2 = INSTRUCTION.VoltOrigin - Amplitude;
+
+        counter  = 1;
+        DACReset = false;
+    }
+
+    if (counter == PulsePeriod)
+        counter = 1;
+    else
+        counter++;
+
+    // output a certain volt
+    if (counter <= (PulsePeriod - PulseWidth)) {
+        outputV = Volt1;
+        DAC_outputV(Volt1);
+    } else {
+        outputV = Volt2;
+        DAC_outputV(Volt2);
+    }
+
+
+    // VoltValue = (ramp1*16 + ramp0/16) * 3.05;
+
+    // check if we reach the final volt
+    if (((outputV >= INSTRUCTION.VoltFinal) && direction_up) || ((outputV <= INSTRUCTION.VoltFinal) && !direction_up)) {
+        PeriodicEvent = false;
+        DACReset      = true;
+    }
+
+    // check overflow/underflow and prepare for next output
+    if (direction_up) {
+        if (Volt1 + INSTRUCTION.Step < Volt1)
+            Volt1 = 0xffff;
+        else
+            Volt1 = Volt1 + INSTRUCTION.Step;
+        if (Volt2 + INSTRUCTION.Step < Volt2)
+            Volt2 = 0xffff;
+        else
+            Volt2 = Volt2 + INSTRUCTION.Step;
+    } else {
+        if (Volt1 - INSTRUCTION.Step > Volt1)
+            Volt1 = 0x0000;
+        else
+            Volt1 = Volt1 - INSTRUCTION.Step;
+        if (Volt2 - INSTRUCTION.Step > Volt2)
+            Volt2 = 0x0000;
+        else
+            Volt2 = Volt2 - INSTRUCTION.Step;
+    }
+
+    if (counter + 1 <= (PulsePeriod - PulseWidth)) {
+        return Volt1;
+    } else {
+        return Volt2;
+    }
+}
+
+static uint16_t CVCurve(CVMode *CV) {
+    static uint16_t DACOutCode;
+    static bool direction_up;           // direction_up = true, if Vfinal > Vorigin
+    static bool current_direction_up;   // current_direction_up = true, Vstep => positive. vice versa
+    static bool firstADCData;           //firstADCdata=true,when min<x<max,cyclenumber--
+    // reset origin volt at the begin
+    if (DACReset) {
+        INSTRUCTION.VoltConstant = CV->_VOrigin;
+        if (CV->_VStop > CV->_VOrigin) {
+            direction_up         = true;
+            current_direction_up = true;
+        } else {
+            direction_up         = false;
+            current_direction_up = false;
+        }
+
+        DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoltConstant);
+        DAC_outputV(DACOutCode);    // output VOLT_ORIGIN
+        DACReset   = false;
+        firstADCData = true;
+        return DACOutCode;
+    }
+
+    if (CT.StepTimeCounter == CV->_StepTime) {
+        // Decide next direction
+        if (CV->_VoVi_Switch == 0x00){   //user see Vout
+            if (direction_up) {
+                if (INSTRUCTION.VoltConstant >= CV->_VStop) {
+                    current_direction_up = false;  // problem occurs when origin == 0000 final == ffff!!!!!!
+                    firstADCData = false;
+                }
+                else if (INSTRUCTION.VoltConstant <= CV->_VOrigin) {
+                    current_direction_up = true;
+                    firstADCData = false;
+                    if (CV->_CycleNumber == 0) {
+                        PeriodicEvent = false;  // periodic event end
+                        DACReset      = true;
+                    }
+                    CV->_CycleNumber--;
+                }
+
+
+                else if(current_direction_up){
+                    if(INSTRUCTION.VoltConstant + CV->_Step > CV->_VStop){
+                        current_direction_up = false;
+                    }
+                }
+                else if(!current_direction_up){
+                    if(INSTRUCTION.VoltConstant - CV->_Step < CV->_VOrigin){
+                        current_direction_up = true;
+                        if (CV->_CycleNumber == 0) {
+                            PeriodicEvent = false;  // periodic event end
+                            DACReset      = true;
+                        }
+                        CV->_CycleNumber--;
+                    }
+                }
+                if (firstADCData){
+                    CV->_CycleNumber--;
+                    firstADCData = false;
+                }
+
+            } else {
+                if (INSTRUCTION.VoltConstant < CV->_VStop) {
+                    current_direction_up = true;  // problem occurs when origin == 0000 final == ffff!!!!!!
+                    firstADCData = false;
+                }
+                else if (INSTRUCTION.VoltConstant > CV->_VOrigin) {
+                    current_direction_up = false;
+                    firstADCData = false;
+                    if (CV->_CycleNumber == 0) {
+                        PeriodicEvent = false;  // periodic event end
+                        DACReset      = true;
+                    }
+                    CV->_CycleNumber--;
+                }
+                else if(current_direction_up){
+                    if(INSTRUCTION.VoltConstant + CV->_Step > CV->_VOrigin){
+                        current_direction_up = false;
+                        if (CV->_CycleNumber == 0) {
+                            PeriodicEvent = false;  // periodic event end
+                            DACReset      = true;
+                        }
+                        CV->_CycleNumber--;
+                    }
+                }
+                else if(!current_direction_up){
+                    if(INSTRUCTION.VoltConstant - CV->_Step < CV->_VStop){
+                        current_direction_up = true;
+                    }
+                }
+                if (firstADCData){//first data =2899mv,CV->_CycleNumber--;
+                    CV->_CycleNumber--;
+                    firstADCData = false;
+                }
+            }
+        }
+        else if (CV->_VoVi_Switch == 0x01){     //user see Vin
+            if (direction_up) {
+                if (INSTRUCTION.VoltConstant >= CV->_VStop) {
+                    current_direction_up = false;  // problem occurs when origin == 0000 final == ffff!!!!!!
+                    firstADCData = false;
+                }
+                else if (INSTRUCTION.VoltConstant <= CV->_VOrigin) {
+                    current_direction_up = true;
+                    firstADCData = false;
+                    if (CV->_CycleNumber == 0) {
+                        PeriodicEvent = false;  // periodic event end
+                        DACReset      = true;
+                    }
+                    CV->_CycleNumber--;
+                }
+
+
+                else if(current_direction_up){
+                    if(INSTRUCTION.VoltConstant + CV->_Step > CV->_VStop){
+                        current_direction_up = false;
+                    }
+                }
+                else if(!current_direction_up){
+                    if(INSTRUCTION.VoltConstant - CV->_Step < CV->_VOrigin){
+                        current_direction_up = true;
+                        if (CV->_CycleNumber == 0) {
+                            PeriodicEvent = false;  // periodic event end
+                            DACReset      = true;
+                        }
+                        CV->_CycleNumber--;
+                    }
+                }
+                if (firstADCData){
+                    CV->_CycleNumber--;
+                    firstADCData = false;
+                }
+
+            } else {
+                if (INSTRUCTION.VoltConstant < CV->_VStop) {
+                    current_direction_up = true;  // problem occurs when origin == 0000 final == ffff!!!!!!
+                    firstADCData = false;
+                }
+                else if (INSTRUCTION.VoltConstant > CV->_VOrigin){
+                    current_direction_up = false;
+                    firstADCData = false;
+                    if (CV->_CycleNumber == 0) {
+                        PeriodicEvent = false;  // periodic event end
+                        DACReset      = true;
+                    }
+                    CV->_CycleNumber--;
+                }
+                else if(current_direction_up){
+                    if(INSTRUCTION.VoltConstant + CV->_Step > CV->_VOrigin){
+                        current_direction_up = false;
+                        if (CV->_CycleNumber == 0) {
+                            PeriodicEvent = false;  // periodic event end
+                            DACReset      = true;
+                        }
+                        CV->_CycleNumber--;
+                    }
+                }
+                else if(!current_direction_up){
+                    if(INSTRUCTION.VoltConstant - CV->_Step < CV->_VStop){
+                        current_direction_up = true;
+                    }
+                }
+                if (firstADCData){//first data =2899mv,CV->_CycleNumber--;
+                    CV->_CycleNumber--;
+                    firstADCData = false;
+                }
+            }
+        }
+//        if (current_direction_up == true){
+//            LED_color(DARKLED, 255, 0, 0);
+//        }
+//        else if (current_direction_up == false){
+//            LED_color(DARKLED, 255, 0, 255);
+//        }
+        
+        // Next output voltage
+        if (CV->_VoVi_Switch == 0x00){
+            if (direction_up) {
+                if (current_direction_up) {
+                    // DACUserCode overflow ?
+                    if (INSTRUCTION.VoltConstant + CV->_Step < INSTRUCTION.VoltConstant) {
+                        INSTRUCTION.VoltConstant = CV->_VStop;
+                    }
+                    // reach Vfinal ?
+                    else if (INSTRUCTION.VoltConstant + CV->_Step > CV->_VStop) {
+                        INSTRUCTION.VoltConstant =CV->_VStop;
+                    }
+                    else if (INSTRUCTION.VoltConstant >= CV->_VStop){
+                        INSTRUCTION.VoltConstant =CV->_VStop;
+                    }
+                    else {
+                        INSTRUCTION.VoltConstant = INSTRUCTION.VoltConstant + CV->_Step;
+                    }
+                }
+                else {
+                    // DACUserCode underflow ?
+                    if (INSTRUCTION.VoltConstant - CV->_Step > INSTRUCTION.VoltConstant) {
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+                    // reach Vorigin ?
+                    else if (INSTRUCTION.VoltConstant - CV->_Step <  CV->_VOrigin) {
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+                    else if (INSTRUCTION.VoltConstant <= CV->_VOrigin){
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+                    else {
+                        INSTRUCTION.VoltConstant = INSTRUCTION.VoltConstant - CV->_Step;
+                        if(INSTRUCTION.VoltConstant > 60000){
+                            INSTRUCTION.VoltConstant = 0;
+                            current_direction_up = true;
+                            if (CV->_CycleNumber == 0) {
+                                PeriodicEvent = false;  // periodic event end
+                                DACReset      = true;
+                            }
+                            CV->_CycleNumber--;
+                        }
+                    }
+                }
+            }
+            else {
+                if (current_direction_up) {
+
+                    if (INSTRUCTION.VoltConstant + CV->_Step < INSTRUCTION.VoltConstant) {
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+
+                    else if (INSTRUCTION.VoltConstant + CV->_Step >  CV->_VOrigin) {
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+                    else if (INSTRUCTION.VoltConstant >= CV->_VOrigin){
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+                    else {
+                        INSTRUCTION.VoltConstant = INSTRUCTION.VoltConstant + CV->_Step;
+                    }
+                }
+                else {
+                    if (INSTRUCTION.VoltConstant - CV->_Step > INSTRUCTION.VoltConstant) {
+                        INSTRUCTION.VoltConstant = CV->_VStop ;
+                    }
+                    else if (INSTRUCTION.VoltConstant - CV->_Step < CV->_VStop) {
+                        INSTRUCTION.VoltConstant = CV->_VStop;
+                    }
+                    else if(INSTRUCTION.VoltConstant <= CV->_VStop){
+                        INSTRUCTION.VoltConstant = CV->_VStop;
+                    }
+                    else {
+                        INSTRUCTION.VoltConstant = INSTRUCTION.VoltConstant - CV->_Step;
+
+                        if(INSTRUCTION.VoltConstant > 60000){
+                            INSTRUCTION.VoltConstant = 0;
+                            current_direction_up = true;
+                        }
+                    }
+                }
+            }
+        }
+        else if (CV->_VoVi_Switch == 0x01){
+            if (direction_up) {
+                if (current_direction_up) {
+                    // DACUserCode overflow ?
+                    if (INSTRUCTION.VoltConstant + CV->_Step < INSTRUCTION.VoltConstant) {
+                        INSTRUCTION.VoltConstant = CV->_VStop;
+                    }
+                    // reach Vfinal ?
+                    else if (INSTRUCTION.VoltConstant + CV->_Step > CV->_VStop) {
+                        INSTRUCTION.VoltConstant =CV->_VStop;
+                    }
+                    else if (INSTRUCTION.VoltConstant >= CV->_VStop){
+                        INSTRUCTION.VoltConstant =CV->_VStop;
+                    }
+                    else {
+                        INSTRUCTION.VoltConstant = INSTRUCTION.VoltConstant + CV->_Step;
+                    }
+                }
+                else {
+                    // DACUserCode underflow ?
+                    if (INSTRUCTION.VoltConstant - CV->_Step > INSTRUCTION.VoltConstant) {
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+                    // reach Vorigin ?
+                    else if (INSTRUCTION.VoltConstant - CV->_Step < CV->_VOrigin) {
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+                    else if (INSTRUCTION.VoltConstant <= CV->_VOrigin){
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+                    else {
+                        INSTRUCTION.VoltConstant = INSTRUCTION.VoltConstant - CV->_Step;
+                        if(INSTRUCTION.VoltConstant > 60000){
+                            INSTRUCTION.VoltConstant = 0;
+                            current_direction_up = true;
+                            if (CV->_CycleNumber == 0) {
+                                PeriodicEvent = false;  // periodic event end
+                                DACReset      = true;
+                            }
+                            CV->_CycleNumber--;
+                        }
+                    }
+                }
+            }
+            else {
+                if (current_direction_up) {
+                    // DACUserCode overflow ?
+                    if (INSTRUCTION.VoltConstant + CV->_Step < INSTRUCTION.VoltConstant) {
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+                    // ex:command 3->1V ,when 1 to 3V, 2.99+0.1 > 3V
+                    else if (INSTRUCTION.VoltConstant + CV->_Step > CV->_VOrigin) {
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+                    else if (INSTRUCTION.VoltConstant >= CV->_VOrigin){
+                        INSTRUCTION.VoltConstant = CV->_VOrigin;
+                    }
+                    else {
+                        INSTRUCTION.VoltConstant = INSTRUCTION.VoltConstant + CV->_Step;
+                    }
+                }
+                else {
+                    if (INSTRUCTION.VoltConstant - CV->_Step > INSTRUCTION.VoltConstant) {
+                        INSTRUCTION.VoltConstant = CV->_VStop ;
+                    }
+                    else if (INSTRUCTION.VoltConstant - CV->_Step < CV->_VStop) {
+                        INSTRUCTION.VoltConstant = CV->_VStop;
+                    }
+                    else if(INSTRUCTION.VoltConstant <= CV->_VStop){
+                        INSTRUCTION.VoltConstant = CV->_VStop;
+                    }
+                    else {
+                        INSTRUCTION.VoltConstant = INSTRUCTION.VoltConstant - CV->_Step;
+
+                        if(INSTRUCTION.VoltConstant > 60000){
+                            INSTRUCTION.VoltConstant = 0;
+                            current_direction_up = true;
+                        }
+                    }
+                }
+            }
+        }
+
+//        NotifyImpedance[0] = 0x00;
+//        NotifyImpedance[1] = 0x00;
+//        NotifyImpedance[2] = (uint8_t)((DACOutCode & 0xFF00) >> 8);
+//        NotifyImpedance[3] = (uint8_t)(DACOutCode & 0x00FF);
+
+
+        DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoltConstant);
+        DAC_outputV(DACOutCode);
+    }
+    return DACOutCode;
+}
+
+static void CV_Plot(CVMode *CV){
+    static uint8_t PreviousGain = GAIN_200R;
+
+    static uint8_t VoltCurrentSwitch = 0;
+    uint16_t ADC_measure = 0;
+
+    if(VoltCurrentSwitch < 5){
+        ReadCurrent(spi_ADC_rxbuf);
+        VoltCurrentSwitch ++;
+    }
+    else if(VoltCurrentSwitch == 5){
+        // read current
+
+        if(INSTRUCTION.AutoGainEnable){
+            CV->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+            if(PreviousGain != INSTRUCTION.ADCGainLevel){
+                PreviousGain = INSTRUCTION.ADCGainLevel;
+                CV->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+                CV->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+            }
+            if(PreviousGain != INSTRUCTION.ADCGainLevel){
+                PreviousGain = INSTRUCTION.ADCGainLevel;
+                CV->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+                CV->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+            }
+        }
+        else{
+            ReadCurrent(spi_ADC_rxbuf);
+            CV->_MeasureData = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+        }
+        VoltCurrentSwitch ++;
+    }
+//    else if(VoltCurrentSwitch < 9){
+//        // read volt
+//        ReadVolt(spi_ADC_rxbuf);
+//        VoltCurrentSwitch++;
+//    }
+//    else if(VoltCurrentSwitch == 9){
+//        /** read battery voltage **/
+//        ReadVolt(spi_ADC_rxbuf);
+//        ADC_measure = (uint16_t) (spi_ADC_rxbuf[0] << 8) | (uint16_t) (spi_ADC_rxbuf[1]);
+//        //CV->MeasureVolt = 20000;
+//        CV->MeasureVolt = DecodeADCVolt(ADC_measure);
+//        VoltCurrentSwitch++;
+//    }
+    else if(VoltCurrentSwitch < 9){
+        if(CV->_VoVi_Switch == 0x01){
+            // read vin volt
+            ReadVolt(spi_ADC_rxbuf);
+        }else if(CV->_VoVi_Switch == 0x00){
+             // read vout volt
+             ReadVoutVolt(spi_ADC_rxbuf);
+         }
+        VoltCurrentSwitch++;
+    }
+    else if(VoltCurrentSwitch == 9){
+        if(CV->_VoVi_Switch == 0x01){
+            // read vin volt
+            ReadVolt(spi_ADC_rxbuf);
+            ADC_measure = (uint16_t) (spi_ADC_rxbuf[0] << 8) | (uint16_t) (spi_ADC_rxbuf[1]);
+            //CV->MeasureVolt = 20000;
+            CV->MeasureVolt = DecodeADCVolt(ADC_measure);
+        }else if(CV->_VoVi_Switch == 0x00){
+           // read vout volt
+            ReadVoutVolt(spi_ADC_rxbuf);
+            ADC_measure = (uint16_t) (spi_ADC_rxbuf[0] << 8) | (uint16_t) (spi_ADC_rxbuf[1]);
+            CV->MeasureVolt = DecodeADCVoutVolt(ADC_measure);
+        }
+        VoltCurrentSwitch++;
+    }
+//    else if (VoltCurrentSwitch < 13){
+//             ReadBatVolt(spi_ADC_rxbuf);
+//             VoltCurrentSwitch ++;
+//    }
+//    else if (VoltCurrentSwitch == 13){
+//         // read battery volt
+//         ReadBatVolt(spi_ADC_rxbuf);
+//         ADC_measure = (uint16_t) (spi_ADC_rxbuf[0] << 8) | (uint16_t) (spi_ADC_rxbuf[1]);
+//         CV->_MeasureBatvolt = DecodeADCBatVolt(ADC_measure);
+//         CV->_MeasureBatvolt = CV->_MeasureBatvolt/10 - 250; // (5.00V) 5000->250 usercode
+//         VoltCurrentSwitch ++;
+//    }
+    else{
+        VoltCurrentSwitch = 0;
+    }
+
+    NotifyCurrent[0] = (uint8_t) (CV->_MeasureData >> 24);
+    NotifyCurrent[1] = (uint8_t) ((CV->_MeasureData & 0x00FF0000) >> 16);
+    NotifyCurrent[2] = (uint8_t) ((CV->_MeasureData & 0x0000FF00) >> 8);
+    NotifyCurrent[3] = (uint8_t) (CV->_MeasureData & 0x000000FF);
+
+    if ((CV->_VoVi_Switch == 0x01) || (CV->_VoVi_Switch == 0x00)){        //user see Vin || user see Vout
+//        NotifyVolt[0] = (uint8_t) (CV->MeasureVolt >> 24);
+//        NotifyVolt[1] = (uint8_t) ((CV->MeasureVolt & 0x00FF0000) >> 16);
+//        NotifyVolt[2] = (uint8_t) ((CV->MeasureVolt & 0x0000FF00) >> 8);
+//        NotifyVolt[3] = (uint8_t) (CV->MeasureVolt & 0x000000FF);
+
+        int32_t RealV;
+        RealV = (int32_t)(INSTRUCTION.VoltConstant - 25000)*1000/5;
+        NotifyVolt[0] = (uint8_t)((RealV & 0xFF000000) >> 24);
+        NotifyVolt[1] = (uint8_t)((RealV & 0x00FF0000) >> 16);
+        NotifyVolt[2] = (uint8_t)((RealV & 0x0000FF00) >> 8);
+        NotifyVolt[3] = (uint8_t)(RealV & 0x000000FF);
+    }
+
+//    NotifyBatVolt = (uint8_t) (CV->_MeasureBatvolt & 0x000000FF);
+}
+
+
+#endif
@@ -2,41 +2,38 @@
 #ifndef EliteDAC
 #define EliteDAC

-static bool DACreset = true;
-/* DAC reset parameter */
-#define DACzero 0x85B2
-#define DACposMax 0x0000
-#define DACnegMax 0xFFFF
+static bool DACReset;

-#ifdef ELITE_VERSION_1_3
-#define DACOUT 0x30

-static void DAC_outputV(uint16_t voltLV) {
-    // C = command, X = don't care, D = data
-    // CCCC XXXX = command
-    // DDDD DDDD = v1
-    // DDDD XXXX = v2
-
-    uint8_t v1, v2 = 0;
-    v1 = (uint8_t) (voltLV >> 4) & 0xFF;
-    v2 = (uint8_t) ((voltLV & 0x000F) << 4) & 0xF0;
-
-    spi_DACtxbuf[0] = command;
-    spi_DACtxbuf[1] = v1;
-    spi_DACtxbuf[2] = v2;
-    for (int i = 3; i < SPI_DAC_SIZE; i++) {
-        spi_DACtxbuf[i] = 0;
-    }
-
-    DAC_SPI(SPI_DAC_SIZE, spi_DACtxbuf, spi_rxbuf);
-}
-#endif
+//#ifdef ELITE_VERSION_1_3
+//#define DACOUT 0x30
+//
+//static void DAC_outputV(uint16_t voltLV) {
+//    // C = command, X = don't care, D = data
+//    // CCCC XXXX = command
+//    // DDDD DDDD = v1
+//    // DDDD XXXX = v2
+//
+//    uint8_t v1, v2 = 0;
+//    v1 = (uint8_t) (voltLV >> 4) & 0xFF;
+//    v2 = (uint8_t) ((voltLV & 0x000F) << 4) & 0xF0;
+//
+//    spi_DACtxbuf[0] = command;
+//    spi_DACtxbuf[1] = v1;
+//    spi_DACtxbuf[2] = v2;
+//    for (int i = 3; i < SPI_DAC_SIZE; i++) {
+//        spi_DACtxbuf[i] = 0;
+//    }
+//
+//    DAC_SPI(SPI_DAC_SIZE, spi_DACtxbuf, spi_rxbuf);
+//}
+//#endif

 #ifdef ELITE_VERSION_1_4
 #define DACCLS 0x02
 #define DACOUT 0x31

-static void DAC_outputV(uint16_t voltLV) {
+static uint16_t DAC_outputV(uint16_t voltLV) {
    // C = command, X = don't care, D = data
    // CCCC CCCC = command
    // DDDD DDDD = v1
@@ -55,8 +52,14 @@ static void DAC_outputV(uint16_t voltLV) {
    spi_DACtxbuf[2] = v2;

    DAC_SPI(SPI_DAC_SIZE, spi_DACtxbuf, spi_rxbuf);
+    return voltLV;
 }

 #endif

+static int32_t User2Real(uint16_t UserCode){
+    /* transfer usercode to real voltage value (mV) */
+    return (int32_t) ((UserCode - 25000)*2)/10;
+}
+
 #endif
@@ -0,0 +1,22 @@
+
+#ifndef ELITE_FLAG_CT_INIT
+#define ELITE_FLAG_CT_INIT
+
+static void InitCT(){
+    CT.SampleRate_counter = 1;
+    CT.StepTimeCounter = 1;
+    CT.NotifyCounter = 1;
+    CT.StandByCounter = 0;
+}
+
+static void InitFlag(){
+    PeriodicEvent = false;      // is there an PeriodicEvent?
+    InitPeriodicEvent = true;   // need to create a WorkModeData?
+    DACReset = true;
+    CCModeDACEnable = 0;        // to make sure DAC work after ADC
+    Free_Work_Mode = true;      // Free(WorkModeData)
+//    NotifyReady = false;
+//    DiscardIVFirstData = 0;
+}
+
+#endif
@@ -0,0 +1,38 @@
+/* Copyright (c) 2019. BioPro. Scientific.
+ */
+#ifndef HEADSTAGE_GPTIMER_H
+#define HEADSTAGE_GPTIMER_H
+
+#include <Board.h>
+#include <ti/drivers/timer/GPTimerCC26XX.h>
+#include <ti/sysbios/BIOS.h>
+#include <xdc/runtime/Types.h>
+
+#define EVT_PERIODIC_GPTIMER EVT_PERIODIC_0
+
+static GPTimerCC26XX_Handle gptimer_handle;
+
+static void elite_gptimer_callback(GPTimerCC26XX_Handle handle, GPTimerCC26XX_IntMask interruptMask);
+
+#define elite_gptimer_start() GPTimerCC26XX_start(gptimer_handle)
+#define elite_gptimer_stop() GPTimerCC26XX_stop(gptimer_handle)
+#define elite_gptimer_close() GPTimerCC26XX_close(gptimer_handle)
+#define CLOCK_FREQ 4000  // clock freq = 0.1 ms
+
+#define elite_gptimer_open()                                                                          \
+    do {                                                                                              \
+        GPTimerCC26XX_Params params;                                                                  \
+        GPTimerCC26XX_Params_init(&params);                                                           \
+        params.width          = GPT_CONFIG_16BIT;                                                     \
+        params.mode           = GPT_MODE_PERIODIC_DOWN;                                               \
+        params.debugStallMode = GPTimerCC26XX_DEBUG_STALL_OFF;                                        \
+        gptimer_handle        = GPTimerCC26XX_open(Board_GPTIMER0A, &params);                         \
+        Types_FreqHz  freq;                                                                           \
+        BIOS_getCpuFreq(&freq);                                                                       \
+        GPTimerCC26XX_Value loadVal = freq.lo / 1000 - 1; /*47999*/                                   \
+        GPTimerCC26XX_setLoadValue(gptimer_handle, loadVal);                                          \
+        GPTimerCC26XX_setLoadValue(gptimer_handle, CLOCK_FREQ); /* 0.1 ms*/                           \
+        GPTimerCC26XX_registerInterrupt(gptimer_handle, elite_gptimer_callback, GPT_INT_TIMEOUT);     \
+    } while (0)
+
+#endif  // HEADSTAGE_GPTIMER_H
@@ -0,0 +1,84 @@
+
+#ifndef ELITEIT
+#define ELITEIT
+
+#define absolute(a) ((a<0)? -a:a)
+
+//static int32_t IT_Plot() {
+//    // read ADC current
+//    int32_t Real_Current = 0;
+//    ADCGainControl(INSTRUCTION.ADCGainLevel);
+//    ADCChannelSelect(ADC_CH_CURRENT);
+//    CPUdelay(10);
+//    ADC_read(spi_ADC_rxbuf);
+//
+//    // check if ADC over/under flow
+//    // let the output saturate if over/under flow
+////    ADC_overflow(INSTRUCTION.ADCGainLevel, spi_ADC_rxbuf);
+//
+//    // decode ADC value and put it into notify buffer
+//    Real_Current = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+//
+//    return Real_Current;
+//}
+
+static int32_t IT_Plot(WorkMode *WorkModeData) {
+
+    switch (INSTRUCTION.eliteFxn) {
+            case IV_CURVE:{
+                #define CURRENT_MODE WorkModeData->IV
+                break;
+            }
+            case CV_CURVE:{
+                #define CURRENT_MODE WorkModeData->CV
+                break;
+            }
+            case IT_CURVE:{
+                #define CURRENT_MODE WorkModeData->IT
+                break;
+            }
+            default: {
+                #define CURRENT_MODE WorkModeData->IT
+                break;
+            }
+    }
+   
+    // read ADC current
+    int32_t RealCurrent = 0, RealVolt = 0;
+    static uint8_t PreviousGain = GAIN_200R;
+
+    if(INSTRUCTION.AutoGainEnable){
+        RealCurrent = AutoGainReadCurrent(spi_ADC_rxbuf);
+        if(PreviousGain != INSTRUCTION.ADCGainLevel){
+            PreviousGain = INSTRUCTION.ADCGainLevel;
+            CURRENT_MODE->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+            CURRENT_MODE->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+        }
+        if(PreviousGain != INSTRUCTION.ADCGainLevel){
+            PreviousGain = INSTRUCTION.ADCGainLevel;
+            CURRENT_MODE->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+            CURRENT_MODE->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+        }
+    }
+    else{
+        ReadCurrent(spi_ADC_rxbuf);
+        RealCurrent = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+    }
+
+    CURRENT_MODE->_MeasureData = RealCurrent;
+
+
+//    if(INSTRUCTION.eliteFxn == IV_CURVE){
+//        // RealVo = Vo - RealCurrent * 100R
+//        RealVolt = (INSTRUCTION.VoltConstant - DAC_ZERO)/5 - 200*(RealCurrent/1e6);
+//
+//        NotifyVolt[0] = (uint8_t) (RealVolt >> 24);
+//        NotifyVolt[1] = (uint8_t) ((RealVolt & 0x00FF0000) >> 16);
+//        NotifyVolt[2] = (uint8_t) ((RealVolt & 0x0000FF00) >> 8);
+//        NotifyVolt[3] = (uint8_t) (RealVolt & 0x000000FF);
+//    }
+    return RealCurrent;
+}
+
+
+#endif
@@ -0,0 +1,263 @@
+
+#ifndef ELITEIV
+#define ELITEIV
+
+static uint16_t VoltScan(WorkMode *WorkModeData) {
+    uint16_t Voltage;
+    if (INSTRUCTION.VoltOrigin == INSTRUCTION.VoltFinal) {
+        Voltage = Usercode_Correction_to_DAC(INSTRUCTION.VoltOrigin);
+        DAC_outputV(Voltage);
+        PeriodicEvent = false;
+        return Voltage;
+    } else if (INSTRUCTION.eliteFxn == SQUARE_WAVE_VOLTAMMETRY) {
+        Voltage = SWVCurve(WorkModeData);
+    } else if (INSTRUCTION.eliteFxn == DIFFERENTIAL_PULSE_VOLTAMMETRY) {
+        Voltage = DPVCurve(WorkModeData);
+    } else if (INSTRUCTION.eliteFxn == CV_CURVE) {
+        Voltage = CVCurve(WorkModeData->CV);
+    }
+
+    // IV plot mode
+    else {
+        Voltage = OneWayVoltScan(WorkModeData->IV);
+    }
+
+    return Voltage;
+}
+
+static uint16_t OneWayVoltScan(IVMode *IV) {
+    uint16_t DACOutCode;
+
+    // reset origin volt at the begin
+    if (DACReset) {
+//        DACUserCode = IV->GetVOrigin((struct VoltOutPara *) IV);
+        INSTRUCTION.VoltConstant = IV->_VOrigin;
+        DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoltConstant);
+        DACReset   = false;
+
+        // output VOLT_ORIGIN
+        DAC_outputV(DACOutCode);
+        return DACOutCode;
+    }
+
+    if (CT.StepTimeCounter == IV->_StepTime){
+        if (IV->_VOrigin < IV->_VStop) {//4~5V
+            // output the next output volt
+            INSTRUCTION.VoltConstant = INSTRUCTION.VoltConstant + IV->_Step;
+            // Only used in two-wire IV
+//            if(INSTRUCTION.VoltConstant > IV->_VStop){
+//                INSTRUCTION.VoltConstant = IV->_VStop;
+//            }
+
+            DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoltConstant);
+            DAC_outputV(DACOutCode);
+
+            // end IV task if we reach INSTRUCTION.VoltFinal
+//            if (INSTRUCTION.VoltConstant >= IV->_VStop) {
+//                PeriodicEvent = false;
+//                DACReset      = true;
+//            }
+        } else {
+            INSTRUCTION.VoltConstant = INSTRUCTION.VoltConstant - IV->_Step;
+
+            // check if DACUserCode underflow
+            if(INSTRUCTION.VoltConstant >= 60000){
+                INSTRUCTION.VoltConstant = IV->_VStop;
+            }
+
+            // output the next output volt
+            DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoltConstant);
+            DAC_outputV(DACOutCode);
+
+            // end IV task if we reach INSTRUCTION.VoltFinal
+//            if (INSTRUCTION.VoltConstant <= IV->_VStop){
+//                PeriodicEvent = false;
+//                DACReset      = true;
+////                reset();
+//            }
+        }
+
+//        if (IV->_VoVi_Switch == 0x00 || IV->_VoVi_Switch == 0x01){        //user see Vout/user see Vin
+//            if (IV->_VOrigin < IV->_VStop) {
+//                if(INSTRUCTION.VoltConstant >= IV->_VStop){
+//                    PeriodicEvent = false;
+//                    DACReset      = true;
+//                }
+//            }
+//            else{
+//                if(INSTRUCTION.VoltConstant <= IV->_VStop){
+//                    PeriodicEvent = false;
+//                    DACReset      = true;
+//                }
+//            }
+//        }
+
+//        int32_t RealV;
+//        RealV = DAC_to_realV(DACOutCode);
+//        NotifyVolt[0] = (uint8_t)((RealV & 0xFF000000) >> 24);
+//        NotifyVolt[1] = (uint8_t)((RealV & 0x00FF0000) >> 16);
+//        NotifyVolt[2] = (uint8_t)((RealV & 0x0000FF00) >> 8);
+//        NotifyVolt[3] = (uint8_t)(RealV & 0x000000FF);
+
+//          int32_t RealV;
+//          RealV = (int32_t)(INSTRUCTION.VoltConstant - 25000)/5*1000;
+//          NotifyVolt[0] = (uint8_t)((RealV & 0xFF000000) >> 24);
+//          NotifyVolt[1] = (uint8_t)((RealV & 0x00FF0000) >> 16);
+//          NotifyVolt[2] = (uint8_t)((RealV & 0x0000FF00) >> 8);
+//          NotifyVolt[3] = (uint8_t)(RealV & 0x000000FF);
+
+
+//        NotifyImpedance[0] = 0x00;
+//        NotifyImpedance[1] = 0x00;
+//        NotifyImpedance[2] = (uint8_t)((INSTRUCTION.VoltConstant & 0xFF00) >> 8);
+//        NotifyImpedance[3] = (uint8_t)(INSTRUCTION.VoltConstant & 0x00FF);
+
+            
+    }
+
+    return DACOutCode;
+}
+
+static void IV_Plot(IVMode *IV) {
+    static uint8_t VoltCurrentSwitch = 0;
+    static uint8_t PreviousGain = GAIN_200R;
+    uint16_t ADC_measure = 0;
+
+    if(VoltCurrentSwitch < 5){
+        ReadCurrent(spi_ADC_rxbuf);
+        VoltCurrentSwitch ++;
+    }
+    else if(VoltCurrentSwitch == 5){
+        // read current
+
+        if(INSTRUCTION.AutoGainEnable){
+            IV->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+            if(PreviousGain != INSTRUCTION.ADCGainLevel){
+                PreviousGain = INSTRUCTION.ADCGainLevel;
+                IV->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+                IV->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+            }
+            if(PreviousGain != INSTRUCTION.ADCGainLevel){
+                PreviousGain = INSTRUCTION.ADCGainLevel;
+                IV->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+                IV->_MeasureData = AutoGainReadCurrent(spi_ADC_rxbuf);
+            }
+        }
+        else{
+            ReadCurrent(spi_ADC_rxbuf);
+            IV->_MeasureData = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+        }
+        VoltCurrentSwitch ++;
+    }
+//    else if(VoltCurrentSwitch < 9){
+//        // read volt
+//        ReadVolt(spi_ADC_rxbuf);
+//        VoltCurrentSwitch++;
+//    }
+//    else if(VoltCurrentSwitch == 9){
+//        /** read battery voltage **/
+//        ReadVolt(spi_ADC_rxbuf);
+//        ADC_measure = (uint16_t) (spi_ADC_rxbuf[0] << 8) | (uint16_t) (spi_ADC_rxbuf[1]);
+//        IV->MeasureVolt = DecodeADCVolt(ADC_measure);
+//        VoltCurrentSwitch++;
+//    }
+    else if(VoltCurrentSwitch < 9){
+        if(IV->_VoVi_Switch == 0x01){
+            // read vin volt
+            ReadVolt(spi_ADC_rxbuf);
+        }else if(IV->_VoVi_Switch == 0x00){
+            // read vout volt
+            ReadVoutVolt(spi_ADC_rxbuf);
+        }
+        VoltCurrentSwitch++;
+    }
+    else if(VoltCurrentSwitch == 9){
+        if(IV->_VoVi_Switch == 0x01){
+            // read vin volt
+            ReadVolt(spi_ADC_rxbuf);
+            ADC_measure = (uint16_t) (spi_ADC_rxbuf[0] << 8) | (uint16_t) (spi_ADC_rxbuf[1]);
+            IV->MeasureVolt = DecodeADCVolt(ADC_measure);
+        }else if(IV->_VoVi_Switch == 0x00){
+            // read vout volt
+            ReadVoutVolt(spi_ADC_rxbuf);
+            ADC_measure = (uint16_t) (spi_ADC_rxbuf[0] << 8) | (uint16_t) (spi_ADC_rxbuf[1]);
+            IV->MeasureVolt = DecodeADCVoutVolt(ADC_measure);
+        }
+        VoltCurrentSwitch++;
+    }
+//    else if (VoltCurrentSwitch < 13){
+//        ReadBatVolt(spi_ADC_rxbuf);
+//        VoltCurrentSwitch ++;
+//    }
+//    else if (VoltCurrentSwitch == 13){
+//        // read battery volt
+//        ReadBatVolt(spi_ADC_rxbuf);
+//        ADC_measure = (uint16_t) (spi_ADC_rxbuf[0] << 8) | (uint16_t) (spi_ADC_rxbuf[1]);
+//        IV->_MeasureBatvolt = DecodeADCBatVolt(ADC_measure);
+//        IV->_MeasureBatvolt = IV->_MeasureBatvolt/10 - 250; // (5.00V) 5000->250 usercode
+//        VoltCurrentSwitch ++;
+//    }
+    else{
+        VoltCurrentSwitch = 0;
+    }
+
+
+
+    NotifyCurrent[0] = (uint8_t) (IV->_MeasureData >> 24);
+    NotifyCurrent[1] = (uint8_t) ((IV->_MeasureData & 0x00FF0000) >> 16);
+    NotifyCurrent[2] = (uint8_t) ((IV->_MeasureData & 0x0000FF00) >> 8);
+    NotifyCurrent[3] = (uint8_t) (IV->_MeasureData & 0x000000FF);
+
+//    if((IV->_VoVi_Switch == 0x01) || (IV->_VoVi_Switch == 0x00)){        //user see Vin || user see Vout
+////        NotifyVolt[0] = (uint8_t) (IV->MeasureVolt >> 24);
+////        NotifyVolt[1] = (uint8_t) ((IV->MeasureVolt & 0x00FF0000) >> 16);
+////        NotifyVolt[2] = (uint8_t) ((IV->MeasureVolt & 0x0000FF00) >> 8);
+////        NotifyVolt[3] = (uint8_t) (IV->MeasureVolt & 0x000000FF);
+//          int32_t RealV;
+//          RealV = (int32_t)(INSTRUCTION.VoltConstant - 25000)/5*1000;
+//          NotifyVolt[0] = (uint8_t)((RealV & 0xFF000000) >> 24);
+//          NotifyVolt[1] = (uint8_t)((RealV & 0x00FF0000) >> 16);
+//          NotifyVolt[2] = (uint8_t)((RealV & 0x0000FF00) >> 8);
+//          NotifyVolt[3] = (uint8_t)(RealV & 0x000000FF);
+//
+//        if (IV->_VOrigin < IV->_VStop) {
+//            if((IV->MeasureVolt/1000) >= ((int32_t) (IV->_VStop) - DAC_ZERO)/5){
+//                PeriodicEvent = false;
+//                DACReset      = true;
+//            }
+//        }
+//        else{
+//            if((IV->MeasureVolt/1000) <= ((int32_t) (IV->_VStop) - DAC_ZERO)/5){
+//                PeriodicEvent = false;
+//                DACReset      = true;
+//            }
+//        }
+//    }
+
+    if (IV->_VoVi_Switch == 0x00 || IV->_VoVi_Switch == 0x01){        //user see Vout/user see Vin
+          int32_t RealV;
+          RealV = (int32_t)(INSTRUCTION.VoltConstant - 25000)*1000/5;
+          NotifyVolt[0] = (uint8_t)((RealV & 0xFF000000) >> 24);
+          NotifyVolt[1] = (uint8_t)((RealV & 0x00FF0000) >> 16);
+          NotifyVolt[2] = (uint8_t)((RealV & 0x0000FF00) >> 8);
+          NotifyVolt[3] = (uint8_t)(RealV & 0x000000FF);
+
+        if (IV->_VOrigin < IV->_VStop) {
+            if(INSTRUCTION.VoltConstant >= IV->_VStop){
+                PeriodicEvent = false;
+                DACReset      = true;
+            }
+        }
+        else{
+            if(INSTRUCTION.VoltConstant <= IV->_VStop){
+                PeriodicEvent = false;
+                DACReset      = true;
+            }
+        }
+    }
+
+//    NotifyBatVolt = (uint8_t) (IV->_MeasureBatvolt & 0x000000FF);
+}
+
+
+#endif
@@ -0,0 +1,139 @@
+
+#ifndef ELITEINSTRUCTION
+#define ELITEINSTRUCTION
+
+/** ADC gain level **/
+#define GAIN_200K   0x00 // largest gain
+#define GAIN_10K    0x01
+#define GAIN_200R   0x02 // the least gain
+#define GAIN_AUTO   0x03
+
+/** Resister meter **/
+#define RESISTER_METER_SMALL    0x00
+#define RESISTER_METER_MIDDLE1  0x01
+#define RESISTER_METER_MIDDLE2  0x02
+#define RESISTER_METER_LARGE    0x03
+
+/** CC mode parameter **/
+// CurrentLV
+#define CURRENT_LV_NA 0x00
+#define CURRENT_LV_UA 0x01
+#define CURRENT_LV_MA 0x02
+
+/* DAC reset parameter */
+#define DAC_ZERO 25000
+#define DAC_POS_MAX 0x0000
+#define DAC_NEG_MAX 0xFFFF
+
+// Step time macro
+#define STEPTIME_HALF_SEC 5000
+#define STEPTIME_ONE_SEC 10000
+#define STEPTIME_TWO_SEC 20000
+
+/*==============================
+ ==== headstage instruction ====
+ =============================*/
+struct HEADSTAGE_INSTRUCTION {
+    /** chip ID */
+    uint8_t chip_id;
+
+    /** Sample rate **/
+     // SampleRate = SampleRateTable[SampleRateIndex]
+    uint8_t SampleRateIndex;
+    uint32_t SampleRate;
+
+    /** DAC parameter **/
+     // volt san parameter
+    uint16_t VoltOrigin;
+    uint16_t VoltFinal;
+    uint16_t Step;
+    uint16_t StepTime;
+
+     // constant volt
+     // which is used in CC mode as VMax and VMin
+    uint16_t VoltConstant;
+
+    /** ADC parameter **/
+    uint8_t ADCGainLevel;
+
+    uint8_t AutoGainEnable;
+
+    /** Notify parameter **/
+    uint16_t NotifyRate;
+
+    /** Constant Current Parameter **/
+    // Charge is a bool; true => current > 0, vice versa
+    uint8_t Charge;
+    int32_t ConstantCurrent;
+    uint16_t VoltLimit;
+
+    /** Resister Measure **/
+    uint8_t ResisterMeter;
+
+    // elite function
+    uint8_t eliteFxn;
+
+    uint8_t CycleNumber;
+
+    uint8_t VoVi_Switch;
+
+} INSTRUCTION = {0};
+
+/*********************************************************************
+ * @fn      InitEliteInstruction
+ *
+ * @brief   Init all INSTRUCTION variable.
+ *
+ * @param   None.
+ *
+ * @return  None.
+ */
+static void InitEliteInstruction(){
+    INSTRUCTION.chip_id = 0;
+    INSTRUCTION.SampleRateIndex = 1;
+    INSTRUCTION.SampleRate = 100;
+    INSTRUCTION.VoltOrigin = DAC_ZERO;
+    INSTRUCTION.VoltFinal = DAC_ZERO;
+    INSTRUCTION.Step = 0x0005; // 0x0005 = 1mV
+    INSTRUCTION.StepTime = STEPTIME_ONE_SEC;    // about 0.5 sec
+    INSTRUCTION.VoltConstant = DAC_ZERO;  // is about 0V
+    INSTRUCTION.ADCGainLevel = GAIN_AUTO;
+    INSTRUCTION.AutoGainEnable = 1;
+    INSTRUCTION.NotifyRate = STEPTIME_ONE_SEC/10;
+    INSTRUCTION.ResisterMeter = RESISTER_METER_LARGE;
+    INSTRUCTION.Charge = 1;
+    INSTRUCTION.ConstantCurrent = 0x00000000;
+    INSTRUCTION.VoltLimit = 0x0000;
+    INSTRUCTION.eliteFxn = 0; // default is a null event
+    INSTRUCTION.CycleNumber = 0;
+    INSTRUCTION.VoVi_Switch = 0x01;    //VoVi_Switch == 0 => user see Vo / VoVi_Switch == 1 => user see Vi
+}
+
+/*********************************************************************
+ * @fn      GetInstructionParameter
+ *
+ * @brief   Get Constant Current mode parameter.
+ *
+ * @param   ins - instruction including current value and unit
+ *
+ * @return  None.
+ */
+static void GetInstructionParameter(uint8 *ins){
+    // CurrentLV=0 => unit is nA
+    // CurrentLV=1 => unit is uA
+    // CurrentLV=2 => unit is mA
+//    INSTRUCTION.CurrentLV = (*ins);
+
+    // ConstantCurrentRange=0 => current value is 0~499
+    // ConstantCurrentRange=1 => current value is 500~999
+//    INSTRUCTION.ConstantCurrentRange = (*ins) & 0x0F;
+
+    // ConstantCurrent divide ConstantCurrentRange into 50000 count (thus each count is 0.01)
+        // e.g. 485.7 uA can be represent by
+        // CurrentLV = 1 (unit is uA)
+        // ConstantCurrentRange = 0 (current range is 0~499)
+        // ConstantCurrent = 48570
+    INSTRUCTION.ConstantCurrent = (uint32_t) (*(ins+1))<<24 | (uint32_t) (*(ins+2))<<16 | (uint32_t) (*(ins+3))<<8 | (uint32_t) (*(ins+4));
+}
+
+#endif
@@ -0,0 +1,70 @@
+
+#ifndef ELITEKEYDETECT
+#define ELITEKEYDETECT
+
+#define CLOCK_ONE_SECOND 10000
+
+static bool TurnOnElite(uint8_t key) {
+    static uint16_t TurnOnCounter = 0;
+
+    if (key == 0) {
+        // press 1 sec, power on LED
+        if (TurnOnCounter >= CLOCK_ONE_SECOND) {
+            PIN_setOutputValue(pin_handle, enable_5v, 1);  // enable 5V
+            TurnOn10V();
+            LEDPowerON();
+            return true;
+        } else {
+            TurnOnCounter++;
+            return false;
+        }
+    } else {
+        TurnOnCounter = 0;
+        PIN_setOutputValue(pin_handle, enable_5v, 0);  // enable 5V
+        return false;
+    }
+}
+
+static void EliteKeyPress(uint8_t key) {
+    static uint16_t ShutDownCounter = 0;
+    static uint8_t OriginEliteFxn  = 0;
+
+    if (key == 0) {
+        // key = 0 if press
+        // press key => bight LED
+
+        if (ShutDownCounter == CLOCK_ONE_SECOND) {
+            KeyWorkModeLED();
+        }
+
+        // press 3~4 sec, shutdown 2650
+        else if (ShutDownCounter > (CLOCK_ONE_SECOND*3) ) {
+            LED_color(DARKLED, 0xFF, 0xFF, 0x00);
+            PIN_setOutputValue(pin_handle, enable_5v, 0);  // disable 5V
+        }
+        ShutDownCounter ++;
+    } else {
+        if (OriginEliteFxn == INSTRUCTION.eliteFxn) {  // old function == currunt instruction
+            if (ShutDownCounter != 0) {
+                // dark LED
+                WorkModeLED();
+                ShutDownCounter = 0;
+            }
+        } else {  // old function != currunt instruction
+            OriginEliteFxn = INSTRUCTION.eliteFxn;
+            if (ShutDownCounter != 0) {
+                ShutDownCounter = 0;
+            }
+            // dark mode LED
+            WorkModeLED();
+        }
+    }
+}
+
+static void TurnOn10V() {
+    If10Von = true;
+    PIN_setOutputValue(pin_handle, enable_10v, 1);
+    CPUdelay(8000);
+}
+
+#endif
@@ -0,0 +1,138 @@
+
+#ifndef ELITELED
+#define ELITELED
+
+#define DARKLED 0xE1
+#define LIGHTLED 0xE8
+static void LED_color(uint8_t bright, uint8_t red, uint8_t green, uint8_t blue);
+#define LEDPowerON() LED_color(DARKLED, 0x00, 0xFA, 0x00)
+#define WORKLED() LED_color(0xE2, 0x00, 0x40, 0x40)
+#define KEYLED() LED_color(LIGHTLED, 0xF0, 0xA0, 0x00)
+
+static void LED_color(uint8_t bright, uint8_t red, uint8_t green, uint8_t blue) {
+    spi_LEDtxbuf[0] = 0x0000;
+    spi_LEDtxbuf[1] = 0x0000;
+    for (int i = 2; i < SPI_LED_SIZE - 2; i += 2) {
+        spi_LEDtxbuf[i]     = 0xE000 | ((uint16_t)bright << 8) | blue;
+        spi_LEDtxbuf[i + 1] = ((uint16_t)green << 8) | red;
+    }
+
+    spi_LEDtxbuf[SPI_LED_SIZE - 2] = 0xffff;
+    spi_LEDtxbuf[SPI_LED_SIZE - 1] = 0xffff;
+
+    LED_SPI(SPI_LED_SIZE, spi_LEDtxbuf, spi_LEDrxbuf);
+}
+
+static void WorkModeLED() {
+    switch (INSTRUCTION.eliteFxn) {
+    case IV_CURVE: {
+        WORKLED();
+        break;
+    }
+    case CV_CURVE: {
+        WORKLED();
+        break;
+    }
+    case DIFFERENTIAL_PULSE_VOLTAMMETRY: {
+        WORKLED();
+        break;
+    }
+    case SQUARE_WAVE_VOLTAMMETRY: {
+        WORKLED();
+        break;
+    }
+    case VOLT_OUTPUT: {
+        WORKLED();
+        break;
+    }
+    case ZT_CURVE: {
+        WORKLED();
+        break;
+    }
+    case VT_CURVE: {
+        WORKLED();
+        break;
+    }
+    case IT_CURVE: {
+        WORKLED();
+        break;
+    }
+    case CONSTANT_CURRENT:{
+        WORKLED();
+        break;
+    }
+    case VIS_RST: {
+        LEDPowerON();
+        break;
+    }
+    case ADC_TEST: {
+        WORKLED();
+        break;
+    }
+    case READ_VOUT_VALUE: {
+        WORKLED();
+        break;
+    }
+
+    default: {
+        LEDPowerON();
+        break;
+    }
+    }
+}
+
+static void KeyWorkModeLED() {
+    KEYLED();
+    /*
+    switch(INSTRUCTION.eliteFxn){
+        case IV_CURVE:{
+            LED_color(LIGHTLED, 0xF0, 0xF0, 0x00);
+            break;
+        }
+        case CV_CURVE:{
+            LED_color(LIGHTLED, 0xF0, 0xF0, 0x00);
+            break;
+        }
+        case DIFFERENTIAL_PULSE_VOLTAMMETRY:{
+            LED_color(LIGHTLED, 0xF0, 0xF0, 0x00);
+            break;
+        }
+        case SQUARE_WAVE_VOLTAMMETRY:{
+            LED_color(LIGHTLED, 0xF0, 0xF0, 0x00);
+            break;
+        }
+        case VOLT_OUTPUT:{
+            LED_color(LIGHTLED, 0xF0, 0xF0, 0x00);
+            break;
+        }
+        case ZT_CURVE:{
+            LED_color(LIGHTLED, 0xF0, 0xF0, 0x00);
+            break;
+        }
+        case VT_CURVE:{
+            LED_color(LIGHTLED, 0xF0, 0xF0, 0x00);
+            break;
+        }
+        case IT_CURVE:{
+            LED_color(LIGHTLED, 0xF0, 0xF0, 0x00);
+            break;
+        }
+
+        case VIS_RST:{
+            LED_color(LIGHTLED, 0xF0, 0xF0, 0x00);
+            break;
+        }
+        case ADC_TEST:{
+            LED_color(LIGHTLED, 0xF0, 0xF0, 0x00);
+            break;
+        }
+
+        default:{
+            LED_color(LIGHTLED, 0xF0, 0xF0, 0x00);
+            break;
+        }
+    }
+    */
+}
+
+#endif
@@ -24,12 +24,44 @@ static uint32_t not_time_stamp;
 static uint8_t NotifyCurrent[4] = {0};
 static uint8_t NotifyVolt[4] = {0};
 static uint8_t NotifyImpedance[4] = {0};
+static uint8_t NotifyBatVolt = 0;

 /**
 * counter of notify send.
 */
 static uint32_t notify_counter = 0;

+// ****************** New Notify Format ******************************** //
+/*
+ * Notify format
+ *
+ *
+         |               |   1           |       2       |           3   |
+         0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2
+         -----------------------------------------------------------------
+         |    header     |
+         |    current                                                    |
+         | voltage or impedance                                          |
+         |  mode & gain  |
+         |    time stamp                                                 |
+         |  cycle number |
+
+
+    mode & gain
+        this byte include Elite working mode and ADC gain level
+        we use "(mode & 0xF0) | (gain & 0x0F)" to encode these two information
+
+     cycle number
+         for cyclic voltammetry use, we save it as channel number.
+         0xFF
+
+  * header = device ID
+  * I = current (0.001nA), V = voltage (mV),
+  * Z = impedance (k ohm), T = time (ms)
+  *
+  *
+*/
+// ********* End New Format Notify ***************************************** //

 /*
 * Notify format
@@ -55,6 +87,56 @@ static uint32_t notify_counter = 0;
  *
  *
 */
+static void SendNotify() {
+    not_buf[0] = INSTRUCTION.chip_id;

+    for (int i = 0; i < 4; i++) {
+        not_buf[i + 1] = NotifyCurrent[i];
+        not_buf[i + 5] = NotifyVolt[i];
+        not_buf[i + 9] = NotifyImpedance[i];
+    }
+
+    // 1 Timestamp = 32 usec;  31 Timestamp ~= 1 msec
+    not_time_stamp = (Timestamp_get32()) / 31;  // msec
+
+    not_buf[13] = not_time_stamp & 0xff;
+    not_buf[14] = (not_time_stamp >> 8) & 0xff;
+    not_buf[15] = (not_time_stamp >> 16) & 0xff;
+    not_buf[16] = (not_time_stamp >> 24) & 0xff;
+
+    // cyclic voltametry cycle number
+    not_buf[17] = INSTRUCTION.CycleNumber;
+
+    //battery volt
+    not_buf[18] = NotifyBatVolt;
+
+    SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
+}
+
+static void FlushNotify(){
+    not_buf[0] = INSTRUCTION.chip_id;
+
+    for (int i = 0; i < 4; i++) {
+        not_buf[i + 1] = 0;
+        not_buf[i + 5] = 0;
+        not_buf[i + 9] = 0;
+    }
+
+    // 1 Timestamp = 32 usec;  31 Timestamp ~= 1 msec
+    not_time_stamp = 0;  // msec
+
+    not_buf[13] = not_time_stamp & 0xff;
+    not_buf[14] = (not_time_stamp >> 8) & 0xff;
+    not_buf[15] = (not_time_stamp >> 16) & 0xff;
+    not_buf[16] = (not_time_stamp >> 24) & 0xff;
+
+    // cyclic voltametry cycle number
+    not_buf[17] = 0x00;
+
+    //battery volt
+    not_buf[18] = 0x00;
+
+    SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
+}

 #endif
@@ -0,0 +1,22 @@
+
+#ifndef ELITERVout
+#define ELITERVout
+
+static void RVout_Plot(RVoutMode *RVout) {
+    // ADC gain is don't care when measuring voltage
+    INSTRUCTION.ADCGainLevel = GAIN_200R;
+    ADCGainControl(INSTRUCTION.ADCGainLevel);
+
+    // read ADC VoutVolt
+    ReadVoutVolt(spi_ADC_rxbuf);
+
+    // decode ADC value and put it into notify buffer
+    RVout->_MeasureData = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_DAC, spi_ADC_rxbuf);
+
+    NotifyVolt[0] = (uint8_t) (RVout->_MeasureData >> 24);
+    NotifyVolt[1] = (uint8_t) ((RVout->_MeasureData & 0x00FF0000) >> 16);
+    NotifyVolt[2] = (uint8_t) ((RVout->_MeasureData & 0x0000FF00) >> 8);
+    NotifyVolt[3] = (uint8_t) (RVout->_MeasureData & 0x000000FF);
+}
+
+#endif
@@ -0,0 +1,123 @@
+
+#ifndef ELITERESET
+#define ELITERESET
+
+static void reset() {
+    InitFlag();
+    InitCT();
+
+    // IV/CV mode reset
+    DiscardIVFirstData = 0;
+    avg_number          = 0;
+    ADCRealCurrent_long = 0;
+
+    ADCGainControl(INSTRUCTION.ADCGainLevel);
+    DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoltConstant));
+
+    if (INSTRUCTION.eliteFxn == CONSTANT_CURRENT){
+        INSTRUCTION.eliteFxn = 0;
+
+    }
+
+    LEDPowerON();
+    for (int i = 0; i < BLE_INS_BUFF_SIZE; i++) {
+        ins_buf[i] = 0;
+    }
+
+    for (int i = 0; i < SPI_LED_SIZE; i++) {
+        spi_LEDtxbuf[i] = 0;
+        spi_LEDrxbuf[i] = 0;
+    }
+
+    for (int i = 0; i < SPI_DAC_SIZE; i++) {
+        spi_DACtxbuf[i] = 0;
+        spi_rxbuf[i]    = 0;
+    }
+
+    for (int i = 0; i < SPI_ADC_SIZE; i++) {
+        spi_ADC_txbuf[i] = 0;
+        spi_ADC_rxbuf[i] = 0;
+    }
+
+    for (int i = 0; i < BLE_DAT_BUFF_SIZE; i++) {
+        not_buf[i] = 0;
+    }
+
+    PIN_setOutputValue(pin_handle, ADC_CS, 1);  // ADC_CS HIGH
+    PIN_setOutputValue(pin_handle, DAC_CS, 1);  // DAC_CS HIGH
+    CPUdelay(1600);
+}
+
+static void Eliteinterrupt() {
+    InitFlag();
+    InitCT();
+
+    // IV/CV mode reset
+    DiscardIVFirstData = 0;
+    avg_number          = 0;
+    ADCRealCurrent_long = 0;
+    ADCGainControl(GAIN_AUTO);
+    DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoltConstant));
+
+    LEDPowerON();
+    for (int i = 0; i < BLE_INS_BUFF_SIZE; i++) {
+        ins_buf[i] = 0;
+    }
+
+    for (int i = 0; i < SPI_LED_SIZE; i++) {
+        spi_LEDtxbuf[i] = 0;
+        spi_LEDrxbuf[i] = 0;
+    }
+
+    for (int i = 0; i < SPI_DAC_SIZE; i++) {
+        spi_DACtxbuf[i] = 0;
+        spi_rxbuf[i]    = 0;
+    }
+
+    for (int i = 0; i < SPI_ADC_SIZE; i++) {
+        spi_ADC_txbuf[i] = 0;
+        spi_ADC_rxbuf[i] = 0;
+    }
+
+    for (int i = 0; i < BLE_DAT_BUFF_SIZE; i++) {
+        not_buf[i] = 0;
+    }
+
+    PIN_setOutputValue(pin_handle, ADC_CS, 1);  // ADC_CS HIGH
+    PIN_setOutputValue(pin_handle, DAC_CS, 1);  // DAC_CS HIGH
+    CPUdelay(8000);
+}
+
+static void CleanBuffer() {
+    InitFlag();
+    InitEliteInstruction();
+    InitCT();
+    DiscardIVFirstData = 0;
+    avg_number          = 0;
+    ADCRealCurrent_long = 0;
+
+    for (int i = 0; i < SPI_LED_SIZE; i++) {
+        spi_LEDtxbuf[i] = 0;
+        spi_LEDrxbuf[i] = 0;
+    }
+
+    for (int i = 0; i < SPI_DAC_SIZE; i++) {
+        spi_DACtxbuf[i] = 0;
+        spi_rxbuf[i]    = 0;
+    }
+
+    for (int i = 0; i < SPI_ADC_SIZE; i++) {
+        spi_ADC_txbuf[i] = 0;
+        spi_ADC_rxbuf[i] = 0;
+    }
+
+    for (int i = 0; i < BLE_DAT_BUFF_SIZE; i++) {
+        not_buf[i] = 0;
+    }
+
+    PIN_setOutputValue(pin_handle, ADC_CS, 1);  // ADC_CS HIGH
+    PIN_setOutputValue(pin_handle, DAC_CS, 1);  // DAC_CS HIGH
+    CPUdelay(8000);
+}
+
+#endif
@@ -0,0 +1,22 @@
+
+#ifndef ELITEVT
+#define ELITEVT
+
+static void VT_Plot(VTMode *VT) {
+    // ADC gain is don't care when measuring voltage
+    INSTRUCTION.ADCGainLevel = GAIN_200R;
+    ADCGainControl(INSTRUCTION.ADCGainLevel);
+
+    // read ADC volt
+    ReadVolt(spi_ADC_rxbuf);
+
+    // decode ADC value and put it into notify buffer
+    VT->_MeasureData = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_VOLT, spi_ADC_rxbuf);
+
+    NotifyVolt[0] = (uint8_t) (VT->_MeasureData >> 24);
+    NotifyVolt[1] = (uint8_t) ((VT->_MeasureData & 0x00FF0000) >> 16);
+    NotifyVolt[2] = (uint8_t) ((VT->_MeasureData & 0x0000FF00) >> 8);
+    NotifyVolt[3] = (uint8_t) (VT->_MeasureData & 0x000000FF);
+}
+
+#endif
@@ -0,0 +1,655 @@
+/**
+*
+* struct WorkMode{
+*   // Measure Only
+*   ITMode;
+*   VTMode;
+*
+*   // Measure + VoltOut
+*   RTMode;
+*   IVMode;
+*   CVMode;
+*
+*   // Volt out only
+*   VOutMode
+* }
+*
+* -------------------------------
+* // Measure Only
+* struct ITMode{
+*   MeasureData
+*   SetMeasureData()
+*   GetMeasureData()
+* }
+*
+* -------------------------------
+* // VoltOut parameter
+* stuct VOutMode{
+*   Vout_UC
+*   VoltOrigin
+*   Vstop;
+*   Step;
+*   StepTime;
+*   CycleNumber;
+* }
+*
+*/
+
+#ifndef ELITE_WORK_DATA
+#define ELITE_WORK_DATA
+
+#include "EliteInstruction.h"
+#define IV_CURVE 0b00010000
+#define CV_CURVE 0b00100000
+#define VOLT_OUTPUT 0b00110000
+#define ZT_CURVE 0b01000000
+#define VT_CURVE 0b01010000
+#define IT_CURVE 0b01100000
+#define SET_SAMPLE_RATE 0b01110000
+#define SET_ADC_GAIN 0b10000000
+#define DIFFERENTIAL_PULSE_VOLTAMMETRY 0b10100000
+#define SQUARE_WAVE_VOLTAMMETRY 0b10110000
+#define POTENTIAL_STATE 0b11000000
+#define CONSTANT_CURRENT 0b11010000
+#define READ_VOUT_VALUE 0b11100000
+
+static bool Free_Work_Mode = false;
+typedef void (*InitWorkData) ();
+
+/***** Template of Measure and VoltOut parameter *****/
+#define MEASURE \
+    int32_t _MeasureData; \
+    uint16_t _VoVi_Switch
+//    void (*SetMeasureData) (struct Measure *, int32_t);  \
+//    int32_t (*GetMeasureData) (struct Measure *)
+
+/* VoltOut is an UserCode */
+/* VOrigin, VStop, Step are all UserCode */
+#define VOUT_PARA \
+    uint16_t _VoltOut;  \
+    uint16_t _VOrigin;  \
+    uint16_t _VStop;    \
+    uint16_t _Step;     \
+    uint16_t _StepTime;  \
+    uint16_t _CycleNumber
+//    void (*SetVoltOut) (struct VoltOutPara *, uint16_t);  \
+//    uint16_t (*GetVoltOut) (struct VoltOutPara *);  \
+//    void (*SetVOrigin) (struct VoltOutPara *, uint16_t);  \
+//    uint16_t (*GetVOrigin) (struct VoltOutPara *);  \
+//    void (*SetVStop) (struct VoltOutPara *, uint16_t);  \
+//    uint16_t (*GetVStop) (struct VoltOutPara *);  \
+//    void (*SetStep) (struct VoltOutPara *, uint16_t);  \
+//    uint16_t (*GetStep) (struct VoltOutPara *);  \
+//    void (*SetStepTime) (struct VoltOutPara *, uint16_t);  \
+//    uint16_t (*GetStepTime) (struct VoltOutPara *);  \
+//    void (*SetCycleNumber) (struct VoltOutPara *, uint16_t);  \
+//    uint16_t (*GetCycleNumber) (struct VoltOutPara *)
+
+
+/*  CC Mode parameter
+*   @ Measure : measure current value (nA)
+*   @ Charge : Charge or Discharge
+*   @ BatteryV : Vin measure battery voltage (mV)
+*   @ value : constant current setting.
+*             Current value divide current level into 3,000,001 pieces
+*             1,500,000 is zero point; 3,000,000 is 15mA
+*             Current = (value - 1,500,000)/100,000 mA
+*   @ Done : Done = false => Ignore Vmin condition;
+*            Done will be true, if BatteryV <= Vmin last for about 12sec in discharge mode
+*   @ VMax : voltage upper bound in charge mode
+*            CC->value will set to zero if BatteryV >= VMax in charge mode
+*   @ VMin : voltage lower bound in charge mode
+*            CC->value will set to zero if BatteryV <=> VMin in charge mode
+*            Note that VMax and VMin are always larger or equal to zero
+*   @_Transform2RealnA : transform a current user code (IUC) to real current in nA
+*/
+#define CC_PARA \
+    MEASURE;    \
+    uint8_t Charge; \
+    int32_t BatteryV;   \
+    int32_t value;  \
+    uint16_t Done;   \
+    uint16_t VMax;  \
+    uint16_t VMin;  \
+    int32_t (*_Transform2RealnA)(struct CCModePara *)
+
+
+#define LIMIT \
+    uint32_t _LimitValue; \
+    void (*SetLimitValue) (struct Limit *, uint32_t); \
+    uint32_t (*GetLimitValue) (struct Limit*)
+
+struct Measure{
+    MEASURE;
+};
+
+struct VoltOutPara{
+    VOUT_PARA;
+};
+
+struct Limit{
+    LIMIT;
+};
+
+struct CCModePara{
+    CC_PARA;
+};
+/***** End of Measure and VoltOut parameter *****/
+
+
+/***** Measure Only Mode *****/
+//void _SetMeasureData(struct Measure *self, int32_t Data){
+//    self->_MeasureData = Data;
+//}
+//
+//int32_t _GetMeasureData(struct Measure *self){
+//    return self->_MeasureData;
+//}
+
+
+/**** Limit Mode ****/
+//LimitValue
+void _SetLimitValue(struct Limit *self, uint32_t LimitValue){
+    self->_LimitValue = LimitValue;
+}
+uint32_t _GetLimitValue(struct Limit *self){
+    return self->_LimitValue;
+}
+
+/* IT Mode Data */
+typedef struct _ITMode{
+    MEASURE;
+    LIMIT;
+}ITMode;
+
+ITMode * InitITMode(){
+    ITMode *ret = malloc(sizeof(ITMode));
+    ret->_MeasureData = 0;
+//    ret->SetMeasureData = &_SetMeasureData;
+//    ret->GetMeasureData = &_GetMeasureData;
+
+    ret->_LimitValue = 0;
+    
+    ret->SetLimitValue = &_SetLimitValue;
+    ret->GetLimitValue = &_GetLimitValue;
+    return ret;
+}
+/* End of IT Mode Data */
+
+/* VT Mode Data */
+typedef struct _VTMode{
+    MEASURE;
+}VTMode;
+
+VTMode * InitVTMode(){
+    VTMode *ret = malloc(sizeof(VTMode));
+    ret->_MeasureData = 0;
+//    ret->SetMeasureData = &_SetMeasureData;
+//    ret->GetMeasureData = &_GetMeasureData;
+    return ret;
+}
+/* End of VT Mode Data */
+
+/* ReadVOut Mode Data */
+typedef struct _RVoutMode{
+    MEASURE;
+}RVoutMode;
+
+RVoutMode * InitRVoutMode(){
+    RVoutMode *ret = malloc(sizeof(RVoutMode));
+    ret->_MeasureData = 0;
+//    ret->SetMeasureData = &_SetMeasureData;
+//    ret->GetMeasureData = &_GetMeasureData;
+    return ret;
+}
+/* End of ReadVOut Mode Data */
+/***** End of Measure Only Mode *****/
+
+
+/**** VoltOut Only Mode ****/
+//// VoltOut
+//void _SetVoltOut(struct VoltOutPara *self, uint16_t VoltOut){
+//    self->_VoltOut = VoltOut;
+//}
+//uint16_t _GetVoltOut(struct VoltOutPara *self){
+//    return self->_VoltOut;
+//}
+//
+//// VOrigin
+//void _SetVOrigin(struct VoltOutPara *self, uint16_t VOrigin){
+//    self->_VOrigin = VOrigin;
+//}
+//uint16_t _GetVOrigin(struct VoltOutPara *self){
+//    return self->_VOrigin;
+//}
+//
+//// VStop
+//void _SetVStop(struct VoltOutPara *self, uint16_t VStop){
+//    self->_VStop = VStop;
+//}
+//uint16_t _GetVStop(struct VoltOutPara *self){
+//    return self->_VStop;
+//}
+//
+//// Step
+//void _SetStep(struct VoltOutPara *self, uint16_t Step){
+//    self->_Step = Step;
+//}
+//uint16_t _GetStep(struct VoltOutPara *self){
+//    return self->_Step;
+//}
+//
+//// StepTime
+//void _SetStepTime(struct VoltOutPara *self, uint16_t StepTime){
+//    self->_StepTime = StepTime;
+//}
+//uint16_t _GetStepTime(struct VoltOutPara *self){
+//    return self->_StepTime;
+//}
+//
+//// CycleNumber
+//void _SetCycleNumber(struct VoltOutPara *self, uint16_t CycleNumber){
+//    self->_CycleNumber = CycleNumber;
+//}
+//uint16_t _GetCycleNumber(struct VoltOutPara *self){
+//    return self->_CycleNumber;
+//}
+
+
+/* VoltOut Mode Data */
+typedef struct _VoltOutMode{
+    VOUT_PARA;
+}VoltOutMode;
+
+VoltOutMode *InitVoltOutMode(){
+    VoltOutMode *ret = malloc(sizeof(VoltOutMode));
+    ret->_VoltOut = INSTRUCTION.VoltConstant;  // 25000 is DAC_ZERO
+    ret->_VOrigin = DAC_ZERO;
+    ret->_VStop = DAC_ZERO;
+    ret->_Step  =   0;
+    ret->_StepTime = 10000; // STEPTIME_ONE_SEC
+    ret->_CycleNumber = 1;
+
+//    ret->SetVoltOut = &_SetVoltOut;
+//    ret->GetVoltOut = &_GetVoltOut;
+//    ret->SetVOrigin = &_SetVOrigin;
+//    ret->GetVOrigin = &_GetVOrigin;
+//    ret->SetVStop = &_SetVStop;
+//    ret->GetVStop = &_GetVStop;
+//    ret->SetStep = &_SetStep;
+//    ret->GetStep = &_GetStep;
+//    ret->SetStepTime = &_SetStepTime;
+//    ret->GetStepTime = &_GetStepTime;
+//    ret->SetCycleNumber = &_SetCycleNumber;
+//    ret->GetCycleNumber = &_GetCycleNumber;
+    return ret;
+}
+/* End of VoltOut Mode Data */
+/**** End of VoltOut Only Mode ****/
+
+
+/**** Measure + VoltOut Mode ****/
+/* IV Mode Data */
+typedef struct _IVMode{
+    MEASURE;
+    int32_t MeasureVolt;
+    VOUT_PARA;
+    LIMIT;
+    int32_t _MeasureBatvolt;
+}IVMode;
+
+IVMode *InitIVMode(){
+    IVMode *ret = malloc(sizeof(IVMode));
+    ret->_MeasureData = 0;
+    ret->MeasureVolt = (INSTRUCTION.VoltOrigin - DAC_ZERO)/5;
+    ret->_VoVi_Switch = INSTRUCTION.VoVi_Switch;
+
+    ret->_VoltOut = DAC_ZERO;
+    ret->_VOrigin = INSTRUCTION.VoltOrigin;
+    ret->_VStop = INSTRUCTION.VoltFinal;
+    ret->_Step  = INSTRUCTION.Step;
+    ret->_StepTime = INSTRUCTION.StepTime;
+    ret->_CycleNumber = 1;
+    ret->_MeasureBatvolt = 0;
+
+
+//    ret->SetVoltOut = &_SetVoltOut;
+//    ret->GetVoltOut = &_GetVoltOut;
+//    ret->SetVOrigin = &_SetVOrigin;
+//    ret->GetVOrigin = &_GetVOrigin;
+//    ret->SetVStop = &_SetVStop;
+//    ret->GetVStop = &_GetVStop;
+//    ret->SetStep = &_SetStep;
+//    ret->GetStep = &_GetStep;
+//    ret->SetStepTime = &_SetStepTime;
+//    ret->GetStepTime = &_GetStepTime;
+//    ret->SetCycleNumber = &_SetCycleNumber;
+//    ret->GetCycleNumber = &_GetCycleNumber;
+
+    ret->_LimitValue = 1e5;
+    
+    ret->SetLimitValue = &_SetLimitValue;
+    ret->GetLimitValue = &_GetLimitValue;
+    return ret;
+}
+/* End of IV Mode Data */
+
+/* RT Mode Data */
+typedef struct _RTMode{
+    MEASURE;
+    VOUT_PARA;
+}RTMode;
+
+RTMode * InitRTMode(){
+    RTMode *ret = malloc(sizeof(RTMode));
+    ret->_MeasureData = 0;
+//    ret->SetMeasureData = &_SetMeasureData;
+//    ret->GetMeasureData = &_GetMeasureData;
+
+    ret->_VoltOut = DAC_ZERO;  // 25000 is DAC_ZERO
+    ret->_VOrigin = DAC_ZERO;
+    ret->_VStop = DAC_ZERO;
+    ret->_Step  =   0;
+    ret->_StepTime = 10000; // STEPTIME_ONE_SEC
+    ret->_CycleNumber = 1;
+
+//    ret->SetVoltOut = &_SetVoltOut;
+//    ret->GetVoltOut = &_GetVoltOut;
+//    ret->SetVOrigin = &_SetVOrigin;
+//    ret->GetVOrigin = &_GetVOrigin;
+//    ret->SetVStop = &_SetVStop;
+//    ret->GetVStop = &_GetVStop;
+//    ret->SetStep = &_SetStep;
+//    ret->GetStep = &_GetStep;
+//    ret->SetStepTime = &_SetStepTime;
+//    ret->GetStepTime = &_GetStepTime;
+//    ret->SetCycleNumber = &_SetCycleNumber;
+//    ret->GetCycleNumber = &_GetCycleNumber;
+    return ret;
+}
+/* End of RT Mode Data */
+
+/* CV Mode*/
+typedef struct _CVMode{
+    MEASURE;
+    int32_t MeasureVolt;
+    VOUT_PARA;
+    int32_t _MeasureBatvolt;
+}CVMode;
+
+CVMode * InitCVMode(){
+    CVMode *ret = malloc(sizeof(CVMode));
+    ret->_MeasureData = (INSTRUCTION.VoltOrigin- DAC_ZERO)/5;
+//    ret->SetMeasureData = &_SetMeasureData;
+//    ret->GetMeasureData = &_GetMeasureData;
+    ret->MeasureVolt = 20000;
+
+    ret->_VoltOut = DAC_ZERO;  // 25000 is DAC_ZERO
+    ret->_VOrigin = INSTRUCTION.VoltOrigin;
+    ret->_VStop = INSTRUCTION.VoltFinal;
+    ret->_Step  = INSTRUCTION.Step;
+    ret->_StepTime = INSTRUCTION.StepTime; // STEPTIME_ONE_SEC
+    ret->_CycleNumber = INSTRUCTION.CycleNumber;
+    ret->_VoVi_Switch = INSTRUCTION.VoVi_Switch;
+    ret->_MeasureBatvolt = 0;
+//    ret->SetVoltOut = &_SetVoltOut;
+//    ret->GetVoltOut = &_GetVoltOut;
+//    ret->SetVOrigin = &_SetVOrigin;
+//    ret->GetVOrigin = &_GetVOrigin;
+//    ret->SetVStop = &_SetVStop;
+//    ret->GetVStop = &_GetVStop;
+//    ret->SetStep = &_SetStep;
+//    ret->GetStep = &_GetStep;
+//    ret->SetStepTime = &_SetStepTime;
+//    ret->GetStepTime = &_GetStepTime;
+//    ret->SetCycleNumber = &_SetCycleNumber;
+//    ret->GetCycleNumber = &_GetCycleNumber;
+    return ret;
+}
+/*End of CV Mode*/
+
+/* Const Current Mode */
+#define CC_ZERO_POINT     0
+#define MAX_DAC_UC    50000
+#define MIN_DAC_UC      0
+
+/*********************************************************************
+ * @struct  Constant Current Code
+ *
+ * @brief   A struct to handle CC mode command
+ */
+typedef struct _CCMode{
+    CC_PARA;
+}CCMode;
+
+/*********************************************************************
+ * @fn      Transform2RealnA
+ *
+ * @brief   transform an IUC into real current value in nA.
+ *
+ * @param   self, which is an IUC
+ *
+ * @return  an int32_t current value in nA
+ */
+int32_t _Transform2RealnA(struct CCModePara *self){
+    int32_t IUCReal;
+
+    // self->value : 0 ~ 1500000 (which is 0 ~ 1500000 (10nA) )
+    if(self->Charge){
+        IUCReal = (self->value - CC_ZERO_POINT) * 10;
+    }
+    else{
+        IUCReal = -1 * (self->value - CC_ZERO_POINT) * 10;
+    }
+    return IUCReal;
+}
+
+CCMode * InitCCMode(){
+    CCMode *ret = malloc(sizeof(CCMode));
+    ret->_MeasureData = 0;
+    ret->Charge = INSTRUCTION.Charge;
+    ret->BatteryV = 0;
+    ret->Done = 0;
+
+    ret->value = INSTRUCTION.ConstantCurrent;
+    ret->VMax = INSTRUCTION.VoltLimit + DAC_ZERO;
+    ret->VMin = INSTRUCTION.VoltLimit + DAC_ZERO;
+    ret->_Transform2RealnA = &_Transform2RealnA;
+    return ret;
+}
+/*End of Const Current Mode Mode*/
+
+/* Cycle CC Mode */
+typedef struct _CCCMode{
+    CC_PARA;
+
+    /* Vmax and Vmin */
+    // Vmax protect battery charge
+    // Vmin protect battery discharge, uint = mV
+
+    /* Charge/Discharge Current */
+    int32_t ChargeCurrent;
+    int32_t DischargeCurrent;
+    uint8_t CycleNumber;
+
+    bool StandBy;
+    uint32_t StandByTime;
+}CCCMode;
+
+CCCMode * InitCCCMode(){
+    CCCMode *ret = malloc(sizeof(CCCMode));
+    ret->_MeasureData = 0;
+    ret->Charge = 1;
+    ret->BatteryV = 0;
+
+    ret->value = CC_ZERO_POINT;
+    ret->VMax = MAX_DAC_UC;  // max DAC UserCode
+    ret->VMin = MIN_DAC_UC;  // min DAC UserCode
+    ret->ChargeCurrent = 0;
+    ret->DischargeCurrent = 0;
+    ret->CycleNumber = 0;
+    ret->StandBy = false;
+    ret->StandByTime = 0;
+    ret->_Transform2RealnA = &_Transform2RealnA;
+    return ret;
+}
+
+/* End of Cycle CC Mode */
+
+/** Potential State Mode **/
+typedef struct _PS{
+    // measure
+    MEASURE; // circuit current
+    int32_t ReferenceVolt;
+    int32_t _MeasureVolt;
+    VOUT_PARA;
+}PSMode;
+
+PSMode *InitPSMode(){
+    PSMode *ret = malloc(sizeof(PSMode));
+    ret->_MeasureData = 0;
+//    ret->SetMeasureData = &_SetMeasureData;
+//    ret->GetMeasureData = &_GetMeasureData;
+    ret->ReferenceVolt = 0;
+    ret->_MeasureVolt = INSTRUCTION.VoltOrigin;
+
+    ret->_VoltOut = DAC_ZERO;  // 25000 is DAC_ZERO
+    ret->_VOrigin = INSTRUCTION.VoltOrigin;
+    ret->_VStop = INSTRUCTION.VoltFinal;
+    ret->_Step  = INSTRUCTION.Step;
+    ret->_StepTime = INSTRUCTION.StepTime; // STEPTIME_ONE_SEC
+    ret->_CycleNumber = INSTRUCTION.CycleNumber;
+    return ret;
+}
+
+/** End of Potential State Mode **/
+
+typedef union _WorkMode{
+    // Measure only
+    ITMode *IT;
+    VTMode *VT;
+
+    // Output Only
+    VoltOutMode *VO;
+
+    // Measure + Output
+    IVMode *IV;
+    CVMode *CV;
+    RTMode *RT;
+    CCMode *CC;
+//    CCCMode *CCC;
+    PSMode *PS;
+
+    //test mode
+    RVoutMode *RVout;
+}WorkMode;
+
+WorkMode *CreateWorkMode(){
+    WorkMode *ret = malloc(sizeof(WorkMode));
+    return ret;
+}
+
+void InitWorkMode(WorkMode *WM){
+    switch(INSTRUCTION.eliteFxn){
+        case IV_CURVE:
+            WM->IV = InitIVMode();
+            break;
+        case CV_CURVE:
+            WM->CV = InitCVMode();
+            break;
+        case VOLT_OUTPUT:
+            WM->VO = InitVoltOutMode();
+            break;
+        case ZT_CURVE:
+            WM->RT = InitRTMode();
+            break;
+        case VT_CURVE:
+            WM->VT = InitVTMode();
+            break;
+        case IT_CURVE:
+            WM->IT = InitITMode();
+            break;
+        case CONSTANT_CURRENT:
+            WM->CC = InitCCMode();
+            break;
+//        case CYCLE_CONSTANT_CURRENT:
+//            WM->CCC = InitCCCMode();
+//            break;
+        case READ_VOUT_VALUE:
+            WM->RVout = InitRVoutMode();
+            break;
+        default:
+            WM->VT = InitVTMode();
+            break;
+    }
+}
+
+void FreeWorkMode(WorkMode *WM){
+    switch(INSTRUCTION.eliteFxn){
+        case IV_CURVE:
+            if(WM->IV != NULL){
+                free(WM->IV);
+                WM->IV = NULL;
+            }
+            break;
+        case CV_CURVE:
+            if(WM->CV != NULL){
+                free(WM->CV);
+                WM->CV = NULL;
+            }
+            break;
+        case VOLT_OUTPUT:
+            if(WM->VO != NULL){
+                free(WM->VO);
+                WM->VO = NULL;
+            }
+            break;
+        case ZT_CURVE:
+            if(WM->RT != NULL){
+                free(WM->RT);
+                WM->RT = NULL;
+            }
+            break;
+        case VT_CURVE:
+            if(WM->VT != NULL){
+                free(WM->VT);
+                WM->VT = NULL;
+            }
+            break;
+        case IT_CURVE:
+            if(WM->IT != NULL){
+                free(WM->IT);
+                WM->IT = NULL;
+            }
+            break;
+        case CONSTANT_CURRENT:
+            if(WM->CC != NULL){
+                free(WM->CC);
+                WM->CC = NULL;
+            }
+            break;
+        case READ_VOUT_VALUE:
+            if(WM->RVout != NULL){
+                free(WM->RVout);
+                WM->RVout = NULL;
+            }
+            break;
+
+
+//        case CYCLE_CONSTANT_CURRENT:
+//            if(WM->CCC != NULL){
+//                free(WM->CCC);
+//                WM->CCC = NULL;
+//            }
+//            break;
+        default:
+            if(WM->IV != NULL){
+                free(WM->IV);
+                WM->IV = NULL;
+            }
+            break;
+    }
+//    free(WM);
+}
+
+#endif
@@ -0,0 +1,109 @@
+
+#ifndef ELITEZT
+#define ELITEZT
+
+static void ZT_notify(int32_t impedance);
+
+// output a certain voltage e.g. 2v
+// and measure the input voltage
+// => calculate the resister
+// change the output voltage step
+// => get a R-T curve (with resolution = 1 sample/volt step )
+static void ZT_Plot(RTMode *RT) {
+//    int32_t Real_Resister = 0;
+//    static uint16_t CurrentMeasure=0, VoltMeasure=0;
+//    uint8_t SPICurrent[SPI_ADC_SIZE]={0}, SPIVolt[SPI_ADC_SIZE]={0};
+//    static uint8_t VoltCurrentSwitch = 0;
+
+    int32_t volt_32 = 0;
+    int32_t current_32 = 0;
+    int32_t resister_32 = 0;
+
+    if(INSTRUCTION.AutoGainEnable){
+        current_32 = AutoGainReadCurrent(spi_ADC_rxbuf);
+    }
+    else{
+        ReadCurrent(spi_ADC_rxbuf);
+        current_32 = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+    }
+
+
+    volt_32 = User2Real(INSTRUCTION.VoltConstant)*1e5;
+//    ReadVolt(SPIVolt);
+//    VoltMeasure = (uint16_t) (SPIVolt[0] << 8) | (uint16_t) (SPIVolt[1]);
+//    volt_32 = DecodeADCVolt(VoltMeasure)*1e4;
+    resister_32 = volt_32 / current_32;
+    volt_32 = volt_32 / 1e2; //uV
+
+    NotifyVolt[0] = (uint8_t) (volt_32 >> 24);
+    NotifyVolt[1] = (uint8_t) ((volt_32 & 0x00FF0000) >> 16);
+    NotifyVolt[2] = (uint8_t) ((volt_32 & 0x0000FF00) >> 8);
+    NotifyVolt[3] = (uint8_t) (volt_32 & 0x000000FF);
+
+    NotifyCurrent[0] = (uint8_t) (current_32 >> 24);
+    NotifyCurrent[1] = (uint8_t) ((current_32 & 0x00FF0000) >> 16);
+    NotifyCurrent[2] = (uint8_t) ((current_32 & 0x0000FF00) >> 8);
+    NotifyCurrent[3] = (uint8_t) (current_32 & 0x000000FF);
+
+    NotifyImpedance[0] = (uint8_t) (resister_32 >> 24);
+    NotifyImpedance[1] = (uint8_t) ((resister_32 & 0x00FF0000) >> 16);
+    NotifyImpedance[2] = (uint8_t) ((resister_32 & 0x0000FF00) >> 8);
+    NotifyImpedance[3] = (uint8_t) (resister_32 & 0x000000FF);
+
+    // set ADC GAIN
+//    if(INSTRUCTION.ResisterMeter == RESISTER_METER_LARGE){
+//        INSTRUCTION.ADCGainLevel = GAIN_200R;
+//    }
+//    else if(INSTRUCTION.ResisterMeter == RESISTER_METER_MIDDLE2){
+//        INSTRUCTION.ADCGainLevel = GAIN_200R;
+//    }
+//    else if(INSTRUCTION.ResisterMeter == RESISTER_METER_MIDDLE1){
+//        INSTRUCTION.ADCGainLevel = GAIN_10K;
+//    }
+//    else{
+//        INSTRUCTION.ADCGainLevel = GAIN_200K;
+//    }
+//    ADCGainControl(INSTRUCTION.ADCGainLevel);
+
+    // Use 9-th measure value as real-measure value
+    // because some value in the begin are garbage
+//    if(VoltCurrentSwitch < 9){
+//        ADCChannelSelect(ADC_CH_CURRENT);
+//        CPUdelay(10);
+//        ADC_read(SPICurrent);
+//        VoltCurrentSwitch ++;
+//    }
+//    else if(VoltCurrentSwitch == 9){
+//        // read current
+//        ADCChannelSelect(ADC_CH_CURRENT);
+//        CPUdelay(10);
+//        ADC_read(SPICurrent);
+//        CurrentMeasure = (uint16_t) (SPICurrent[0] << 8) | (uint16_t) (SPICurrent[1]);
+//        VoltCurrentSwitch ++;
+//    }
+//    else if(VoltCurrentSwitch <18){
+//        // read volt
+//        ADCChannelSelect(ADC_CH_VOLT);
+//        CPUdelay(10);
+//        ADC_read(SPIVolt);
+//        VoltCurrentSwitch++;
+//    }
+//    else if(VoltCurrentSwitch == 18){
+//        // read volt
+//        ADCChannelSelect(ADC_CH_VOLT);
+//        CPUdelay(10);
+//        ADC_read(SPIVolt);
+//        VoltMeasure = (uint16_t) (SPIVolt[0] << 8) | (uint16_t) (SPIVolt[1]);
+//        VoltCurrentSwitch++;
+//    }
+//    else{
+//        VoltCurrentSwitch = 0;
+//    }
+
+    // decode ADC value and put it into notify buffer
+//    DecodeResister(INSTRUCTION.ADCGainLevel, CurrentMeasure, VoltMeasure);
+//    Real_Resister = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
+}
+
+
+#endif
@@ -20,7 +20,7 @@
 #define ADC_CS                          IOID_8
 #define DAC_CS                          IOID_9

-#define Turnon100R                      IOID_5
+#define Turnon200R                      IOID_5
 #define Turnon10K                       IOID_6

 /* I2C */
@@ -45,7 +45,7 @@ const PIN_Config BLE_IO[] = {
    enable_10v | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX,     // 10V_enable
    enable_5v | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX,      // 5V_enable
    shutdown_6994 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX,  // turn off power
-    Turnon100R | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX,
+    Turnon200R | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX,
    Turnon10K | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL | PIN_DRVSTR_MAX,
    switch_on | PIN_INPUT_EN | PIN_PULLDOWN,

@@ -59,7 +59,7 @@ VIS_FUH         = 0b1001_0000       # 9x flush
 VIS_INT         = 0b0110_0000       # 6x interrupt
 VIS_SHIFT_200K  = 0b1010_0000       # Ax shift gear to 200K
 VIS_SHIFT_10K   = 0b1110_0000       # Ex shift gear to 10K
-VIS_SHIFT_100R  = 0b1000_0000       # 8x shift gear to 100R
+VIS_SHIFT_200R  = 0b1000_0000       # 8x shift gear to 100R


 =========================
@@ -190,14 +190,14 @@ MUX
 PGA
    programmable gain amplifier configuration
        (Full Scale Range = FSR)
-        000 = FSR is ��6.144 V
-        001 = FSR is ��4.096 V
-        010 = FSR is ��2.048 V (default)
-        011 = FSR is ��1.024 V
-        100 = FSR is ��0.512 V
-        101 = FSR is ��0.256 V
-        110 = FSR is ��0.256 V
-        111 = FSR is ��0.256 V
+        000 = FSR is  6.144 V
+        001 = FSR is  4.096 V
+        010 = FSR is  2.048 V (default)
+        011 = FSR is  1.024 V
+        100 = FSR is  0.512 V
+        101 = FSR is  0.256 V
+        110 = FSR is  0.256 V
+        111 = FSR is  0.256 V

 M
    ADC operating mode
@@ -375,10 +375,11 @@ characteristic change event

 // product information
 #define DEVICE_NAME "Elite-ZM-v1.4-re"
-#define MAJOR_PRODUCT_NUMBER 0
-#define MINOR_PRODUCT_NUMBER 2
-#define MAJOR_VERSION_NUMBER 1
-#define MINOR_VERSION_NUMBER 2
+#define MAJOR_PRODUCT_NUMBER 0 //0:Elite ,1:Neulive
+#define MINOR_PRODUCT_NUMBER 2 //1:Elite_legacy(Ori_Neulive)  2:Elite_zm  3:Elite_bat
+#define MAJOR_VERSION_NUMBER 1 //1
+#define MINOR_VERSION_NUMBER 2 //2 (1.2:support 1.2~1.4-re)
+//0310 //bat1.0

 #define ELITE_VERSION_1_4
 //#define ELITE_VERSION_1_3
@@ -402,21 +403,12 @@ characteristic change event
 #endif  // ICALL_EVENTS
 #include <ti/sysbios/hal/Hwi.h>
 #include <ti/sysbios/knl/Queue.h>
-#include "EliteADC.h"
-#include "EliteDAC.h"
-#include "EliteSPI.h"
-#include "Elite_PIN.h"
-

 #define DARKLED 0xE1
 #define LIGHTLED 0xE8
 static void LED_color(uint8_t bright, uint8_t red, uint8_t green, uint8_t blue);
 #define LEDPowerON() LED_color(DARKLED, 0x00, 0xFA, 0x00)

-#ifdef ELITE_VERSION_1_4
-#include "EliteI2C.h"
-#endif
-
 #ifdef USE_ICALL
 #include <icall.h>
 #else
@@ -426,11 +418,11 @@ static void LED_color(uint8_t bright, uint8_t red, uint8_t green, uint8_t blue);
 // Internal Events for RTOS application
 #ifndef RTOSPARA
 #define RTOSPARA
-#define SBP_STATE_CHANGE_EVT    0x0001
-#define SBP_CHAR_CHANGE_EVT     0x0002
-#define SBP_PERIODIC_EVT        0x0004
-#define SBP_CONN_EVT_END_EVT    0x0008
-#define SBP_KEY_CHANGE_EVT      0x0010
+#define SBP_STATE_CHANGE_EVT 0x0001
+#define SBP_CHAR_CHANGE_EVT 0x0002
+#define SBP_PERIODIC_EVT 0x0004
+#define SBP_CONN_EVT_END_EVT 0x0008
+#define SBP_KEY_CHANGE_EVT 0x0010
 #endif

 static Clock_Struct periodicClock;
@@ -440,6 +432,7 @@ static Clock_Struct periodicClock;
 #include "simple_gatt_profile.h"

 static bool            PeriodicEvent = false;
+static bool InitPeriodicEvent = true;
 static ICall_Semaphore semaphore;
 static uint16_t        events;

@@ -500,60 +493,7 @@ static uint8 channel_table[CHANNEL_COUNT] = {0};
 */
 static int8    channel_pointer            = -1;
 static uint8_t not_buf[BLE_DAT_BUFF_SIZE] = {0};
-/*==============================
- ==== headstage instruction ====
- =============================*/
-struct HEADSTAGE_INSTRUCTION {
-    /** chip ID */
-    uint8_t chip_id;
-
-    /** RATE. ADC clock/sampling rate value*/
-    uint32_t adc_clock_rate;
-
-    /** CS **/
-    uint8_t chip_select;
-
-    // ADC
-
-    /** SS **/
-    uint8_t single_short;
-
-    /** MUX **/
-    uint8_t multi_config;
-
-    /** PGA **/
-    uint8_t gain_amp_config;
-
-    /** M **/
-    uint8_t operating_mode;
-
-    /** DR **/
-    uint8_t adc_data_rate;
-
-    uint8_t temp_sensor;
-
-    uint8_t pullup_R_enable;
-
-    uint8_t no_operation;
-
-    uint8_t reserved;
-
-    // LED
-
-    uint8_t global;
-
-    uint8_t blue;
-
-    uint8_t green;
-
-    uint8_t red;
-
-    // elite function
-    uint8_t eliteFxn;
-
-    uint8_t CycleNumber;
-
-} INSTRUCTION = {0};
+static uint8_t cis_buf[BLE_CIS_BUFF_SIZE] = {0};

 /*=====================================
 ==== headstage function prototype ====
@@ -598,9 +538,11 @@ static void ADC_test_read(uint8_t *ADCdata);  // for auto shifting
 static void    ADCGainControl(uint8_t ADCLevel);
 static void    ADCChannelSelect(uint8_t ADCChannel);
 static int32_t DecodeADCVolt(uint16_t ADC_measure);
+static int32_t DecodeADCVoutVolt(uint16_t ADC_measure);
 static int32_t DecodeADCCurrent(uint8_t ADCGain, uint16_t ADC_measure);
+static void Impedance_Calculate(uint16_t Voltage, int32_t Current);
 static int32_t DecodeADCValue(uint8_t ADCGain, uint8_t ADCChannel, uint8_t *ADC_raw);
-static void ADC_overflow(uint8_t gain, uint8_t *rawdata);
+static void    ADC_overflow(uint8_t gain, uint8_t *rawdata);

 // DAC function
 static uint16_t Usercode_Correction_to_DAC(uint16_t usercode);
@@ -637,50 +579,50 @@ static void set_update_instruction_callback(update_instruction_callback_type cal
 #define VIS_INT 0b01100000
 #define VIS_SHIFT_200K 0b10100000
 #define VIS_SHIFT_10K 0b11100000
-#define VIS_SHIFT_100R 0b10000000
+#define VIS_SHIFT_200R 0b10000000
+#define VIS_DEVICE_SHINY 0b00010000
+#define VIS_SHINY_DIS 0b00100000

 // real instruction
-#define IVCurve 0b00010000
-#define CyclicVoltammetry 0b00100000
-#define fxnGen 0b00110000
-#define ZTCurve 0b01000000
-#define VTCurve 0b01010000
-#define ITCurve 0b01100000
-#define SetSampleRate 0b01110000
-#define SetADCGain 0b10000000
-#define DifferentialPulseVoltammetry 0b10100000
-#define SquareWaveVoltammetry 0b10110000
-#define PotentialState 0b11000000
+#define IV_CURVE 0b00010000
+#define CV_CURVE 0b00100000
+#define VOLT_OUTPUT 0b00110000
+#define ZT_CURVE 0b01000000
+#define VT_CURVE 0b01010000
+#define IT_CURVE 0b01100000
+#define SET_SAMPLE_RATE 0b01110000
+#define SET_ADC_GAIN 0b10000000
+#define DIFFERENTIAL_PULSE_VOLTAMMETRY 0b10100000
+#define SQUARE_WAVE_VOLTAMMETRY 0b10110000
+#define POTENTIAL_STATE 0b11000000
+#define CONSTANT_CURRENT 0b11010000
+#define READ_VOUT_VALUE 0b11100000
+#define CYCLE_CONSTANT_CURRENT 0b11110000

 // CIS instruction
+#define CIS_VERSION 0x40

 // test instruction
-
-#define ADCTEST 0b10010000
+#define ADC_TEST 0b10010000

 // DAC and ADC function
-static void    DAC_outputV(uint16_t voltLV);
+static uint16_t DAC_outputV(uint16_t voltLV);
 static int32_t DAC_to_realV(uint16_t DACcode);

-// input parameter
-static uint16_t VoltOrigin = DACzero;
-static uint16_t VoltFinal  = DACposMax;
-static uint16_t Step       = 0x009E;  // 10 => 0xA0 ~= 30.5 mv
+static uint16_t DACUserCode = 0x0000;

-static uint16_t SampleRateTable[6] = {1, 10, 100, 500, 1000, 10000};  // 1 =>100 Hz, 10000=>0.01 Hz
-static uint16_t SampleRate         = 1;
-static uint16_t SampleRate_counter = 1;
+static uint32_t SampleRateTable[6] = {100, 1000, 10000, 50000, 100000, 1000000};  // 100 =>100 Hz, 1000000=>0.01 Hz

 // record value for IV curve to calculate average current
-static int16_t avg_number = 1;
-static int32_t ADCRealCurrent = 0;
-static int32_t ADCRealCurrent_avg = 0;
+static uint8_t DiscardIVFirstData = 1;
+static uint16_t   avg_number          = 0;
+static long long ADCRealCurrent_long = 0;

-#define GAIN_200K 0x00
-#define GAIN_10K  0x01
-#define GAIN_200R 0x02
-#define GAIN_AUTO 0x03
-static uint8_t ADCGainLevel = GAIN_200K;
+// Constant Current Mode function
+static uint8_t CCModeDACEnable = 0;
+static int32_t CCModeReadCurrent();
+static int32_t CCModeVoltOut();
+static void CCCurrent2IUC();

 // for DPVCurve SWVCurve
 static uint16_t Amplitude;
@@ -689,32 +631,42 @@ static uint16_t PulseWidth_16;
 static uint8_t  PulsePeriod;
 static uint16_t PulsePeriod_16;

-static uint8_t  StepTime        = 20;  // 0x30 = 2'd48 ~= 2 second, 24 = 0x18 = 1 sec
-static uint16_t StepTime_16     = 0;
-static uint8_t  StepTimeCounter = 1;
+// counter
+struct _CT{
+    uint32_t SampleRate_counter;
+    uint16_t StepTimeCounter;
+    uint16_t NotifyCounter;
+    uint32_t StandByCounter;
+}CT = {0};

+//static bool NotifyReady = false;
+static void InitFlag();
+static void InitCT();
+
+#include "EliteWorkData.h"
 // real instruction fxn
-static uint16_t VoltScan();                   // used in I-V and cyclic
-static void     Notify_IV(uint16_t Voltage);  // send notify voltage after VoltScan()
+static uint16_t VoltScan(WorkMode *WorkModeData);       // used in I-V and cyclic
+static void     DACCode2Real2Notify(uint16_t DACcode);  // send notify voltage after VoltScan()

-static void fxn_Gen();
-static void ZT_plot(uint16_t outV, uint16_t inV);
-static void VT_Plot();
-static int32_t IT_Plot();
+//static void    VOLT_OUTPUT();
+static void    ZT_Plot(RTMode *RT);
+static void    VT_Plot(VTMode *VT);
+static int32_t IT_PlotIT_Plot(WorkMode *WorkModeData);
+static void    RVout_Plot(RVoutMode *RVout);

 // the following fxn do the same thing
 // IVCurve_T is called if Vorigin > Vfinal, vice versa
 static uint16_t OldDAC2UserCode(uint16_t OldDAC);
+static uint16_t StepCode2DACcode(uint16_t StepCode);
 static uint8_t  OldStep2NewStep(uint8_t OldStep);
-static uint8_t  OldStep2NewStepTime(uint8_t StepTime);
+static uint16_t OldStep2NewStepTime(uint8_t StepTime);
 static uint8_t  IVdone = 0;

-static uint16_t IVCurve_T();
-static uint16_t IVCurve_T2();
+static uint16_t OneWayVoltScan(IVMode *IV);
 static void     ramp_test();
-static uint16_t DPVCurve();
-static uint16_t CVCurve();
-static uint16_t SWVCurve();
+static uint16_t DPVCurve(WorkMode *WorkModeData);
+static uint16_t CVCurve(CVMode *CV);
+static uint16_t SWVCurve(WorkMode *WorkModeData);

 static void reset();
 static void Eliteinterrupt();
@@ -725,6 +677,34 @@ static void SendNotify();
 static bool If10Von = false;
 static void TurnOn10V();

+
+#include "EliteInstruction.h"
+#include "EliteADC.h"
+#include "EliteDAC.h"
+#include "EliteSPI.h"
+#include "Elite_PIN.h"
+
+#ifdef ELITE_VERSION_1_4
+#include "EliteI2C.h"
+#endif
+
+#include "EliteDeviceCorrection.h"
+#include "EliteNotify.h"
+#include "EliteFlagCTInit.h"
+#include "EliteReset.h"
+#include "EliteLED.h"
+#include "EliteKeyDetect.h"
+#include "EliteCCMode.h"
+#include "EliteIVCurve.h"
+#include "EliteCVCurve.h"
+#include "EliteITCurve.h"
+#include "EliteVTCurve.h"
+#include "EliteZTCurve.h"
+#include "EliteCCCMode.h"
+#include "impedance_meter.h"
+#include "EliteReadVout.h"
+#include "headstage_version.h"
+
 // update instruction for Z meter
 static void update_ZM_instruction(uint8 *ins) {
    uint8_t ins_type    = ins[0] & 0b11110000;
@@ -732,9 +712,7 @@ static void update_ZM_instruction(uint8 *ins) {
    INSTRUCTION.chip_id = chip_ID;

    uint8_t oper        = ins[1] & 0xF0;  // this is don't care in RIS
-    uint8_t data_length = ins[1] & 0x0F;
-
-    DACreset = true;
+//    uint8_t data_length = ins[1] & 0x0F;

    if (!If10Von) {
        // TurnOn10V();
@@ -744,52 +722,59 @@ static void update_ZM_instruction(uint8 *ins) {
    /***  These are real instruction  ***/
    case INS_TYPE_RIS: {
        switch (ins[2]) {
-        case IVCurve: {
-            CleanBuffer();
-            INSTRUCTION.eliteFxn = IVCurve;
-            DACreset             = true;
+        case IV_CURVE: {
+//            CleanBuffer();
+            INSTRUCTION.eliteFxn = IV_CURVE;
+            DACReset = true;
+            INSTRUCTION.SampleRate = 100;

-            if (ins[3] | ins[4]) {
-                VoltOrigin = ((uint16_t)(ins[3]) << 8) | (uint16_t)(ins[4]);
-                VoltOrigin = Usercode_Correction_to_DAC(VoltOrigin);
-            }
-            if (ins[5] | ins[6]) {
-                VoltFinal = ((uint16_t)(ins[5]) << 8) | (uint16_t)(ins[6]);
-                VoltFinal = Usercode_Correction_to_DAC(VoltFinal);
-            }
+//            if (ins[3] | ins[4]) {
+                INSTRUCTION.VoltOrigin = ((uint16_t)(ins[3]) << 8) | (uint16_t)(ins[4]);
+//                INSTRUCTION.VoltOrigin = Usercode_Correction_to_DAC(INSTRUCTION.VoltOrigin);
+//            }
+//            if (ins[5] | ins[6]) {
+                INSTRUCTION.VoltFinal = ((uint16_t)(ins[5]) << 8) | (uint16_t)(ins[6]);
+//                INSTRUCTION.VoltFinal = Usercode_Correction_to_DAC(INSTRUCTION.VoltFinal);
+//            }

            if (ins[7] | ins[8]) {
-                Step = ((uint16_t)(ins[7]) << 8) | (uint16_t)(ins[8]);
-                Step = Usercode_Correction_to_DAC(Step);
-            }
-            if (ins[9]) {
-                StepTime = ins[9];
-                StepTime = OldStep2NewStepTime(StepTime);
+                INSTRUCTION.Step = ((uint16_t)(ins[7]) << 8) | (uint16_t)(ins[8]);
+//                NotifyImpedance[2] = (uint8_t)((INSTRUCTION.Step & 0xFF00)>>8);
+//                NotifyImpedance[3] = (uint8_t)(INSTRUCTION.Step & 0x00FF);
+                INSTRUCTION.Step = StepCode2DACcode(INSTRUCTION.Step);
            }
+//            if (ins[9]) {
+                INSTRUCTION.StepTime = ins[9];
+                INSTRUCTION.StepTime = OldStep2NewStepTime(INSTRUCTION.StepTime);
+//            }
+//            if(ins[10]) {
+                //INSTRUCTION.VoVi_Switch = ins[10];
+                INSTRUCTION.VoVi_Switch = 0x01;
+//            }
            break;
        }

-        case DifferentialPulseVoltammetry: {
-            CleanBuffer();
-            INSTRUCTION.eliteFxn = DifferentialPulseVoltammetry;
-            DACreset             = true;
+        case DIFFERENTIAL_PULSE_VOLTAMMETRY: {
+//            CleanBuffer();
+            INSTRUCTION.eliteFxn = DIFFERENTIAL_PULSE_VOLTAMMETRY;
+            DACReset             = true;

            if (ins[3] | ins[4]) {
-                VoltOrigin = ((uint16_t)(ins[3]) << 8) | (uint16_t)(ins[4]);
-                VoltOrigin = Usercode_Correction_to_DAC(VoltOrigin);
+                INSTRUCTION.VoltOrigin = ((uint16_t)(ins[3]) << 8) | (uint16_t)(ins[4]);
+                INSTRUCTION.VoltOrigin = Usercode_Correction_to_DAC(INSTRUCTION.VoltOrigin);
            }
            if (ins[5] | ins[6]) {
-                VoltFinal = ((uint16_t)(ins[5]) << 8) | (uint16_t)(ins[6]);
-                VoltFinal = Usercode_Correction_to_DAC(VoltFinal);
+                INSTRUCTION.VoltFinal = ((uint16_t)(ins[5]) << 8) | (uint16_t)(ins[6]);
+                INSTRUCTION.VoltFinal = Usercode_Correction_to_DAC(INSTRUCTION.VoltFinal);
            }

            if (ins[7] | ins[8]) {
-                Step = ((uint16_t)(ins[7]) << 8) | (uint16_t)(ins[8]);
-                Step = Usercode_Correction_to_DAC(Step);
+                INSTRUCTION.Step = ((uint16_t)(ins[7]) << 8) | (uint16_t)(ins[8]);
+                INSTRUCTION.Step = StepCode2DACcode(INSTRUCTION.Step);
            }
            if (ins[9]) {
-                StepTime = ins[9];
-                StepTime = OldStep2NewStepTime(StepTime);
+                INSTRUCTION.StepTime = ins[9];
+                INSTRUCTION.StepTime = OldStep2NewStepTime(INSTRUCTION.StepTime);
            }
            if (ins[10] | ins[11]) {
                Amplitude = ((uint16_t)(ins[10]) << 8) | (uint16_t)(ins[11]);
@@ -801,29 +786,32 @@ static void update_ZM_instruction(uint8 *ins) {
            if (ins[13]) {
                PulseWidth = ins[13];
            }
+            if(ins[14]) {
+                INSTRUCTION.VoVi_Switch = ins[14];
+            }            
            break;
        }

-        case SquareWaveVoltammetry: {
-            CleanBuffer();
-            INSTRUCTION.eliteFxn = SquareWaveVoltammetry;
-            DACreset             = true;
+        case SQUARE_WAVE_VOLTAMMETRY: {
+//            CleanBuffer();
+            INSTRUCTION.eliteFxn = SQUARE_WAVE_VOLTAMMETRY;
+            DACReset             = true;

            if (ins[3] | ins[4]) {
-                VoltOrigin = ((uint16_t)(ins[3]) << 8) | (uint16_t)(ins[4]);
-                VoltOrigin = Usercode_Correction_to_DAC(VoltOrigin);
+                INSTRUCTION.VoltOrigin = ((uint16_t)(ins[3]) << 8) | (uint16_t)(ins[4]);
+                INSTRUCTION.VoltOrigin = Usercode_Correction_to_DAC(INSTRUCTION.VoltOrigin);
            }
            if (ins[5] | ins[6]) {
-                VoltFinal = ((uint16_t)(ins[5]) << 8) | (uint16_t)(ins[6]);
-                VoltFinal = Usercode_Correction_to_DAC(VoltFinal);
+                INSTRUCTION.VoltFinal = ((uint16_t)(ins[5]) << 8) | (uint16_t)(ins[6]);
+                INSTRUCTION.VoltFinal = Usercode_Correction_to_DAC(INSTRUCTION.VoltFinal);
            }
            if (ins[7] | ins[8]) {
-                Step = ((uint16_t)(ins[7]) << 8) | (uint16_t)(ins[8]);
-                Step = Usercode_Correction_to_DAC(Step);
+                INSTRUCTION.Step = ((uint16_t)(ins[7]) << 8) | (uint16_t)(ins[8]);
+                INSTRUCTION.Step = StepCode2DACcode(INSTRUCTION.Step);
            }
            if (ins[9]) {
-                StepTime = ins[9];
-                StepTime = OldStep2NewStepTime(StepTime);
+                INSTRUCTION.StepTime = ins[9];
+                INSTRUCTION.StepTime = OldStep2NewStepTime(INSTRUCTION.StepTime);
            }
            if (ins[10] | ins[11]) {
                Amplitude = ((uint16_t)(ins[10]) << 8) | (uint16_t)(ins[11]);
@@ -832,116 +820,169 @@ static void update_ZM_instruction(uint8 *ins) {
            if (ins[12]) {
                PulseWidth = ins[12];
            }
+            if ( ins[13]) {
+                INSTRUCTION.VoVi_Switch = ins[13];
+            }
            break;
        }

-        case CyclicVoltammetry: {
-            CleanBuffer();
-            INSTRUCTION.eliteFxn = CyclicVoltammetry;
-            DACreset             = true;
+        case CV_CURVE: {
+//            CleanBuffer();
+            INSTRUCTION.eliteFxn = CV_CURVE;
+            DACReset             = true;
+            INSTRUCTION.SampleRate = 100;

-            if (ins[3] | ins[4]) {
-                VoltOrigin = ((uint16_t)(ins[3]) << 8) | (uint16_t)(ins[4]);
-                VoltOrigin = Usercode_Correction_to_DAC(VoltOrigin);
-            }
-            if (ins[5] | ins[6]) {
-                VoltFinal = ((uint16_t)(ins[5]) << 8) | (uint16_t)(ins[6]);
-                VoltFinal = Usercode_Correction_to_DAC(VoltFinal);
-            }
+//            if (ins[3] | ins[4]) {
+                INSTRUCTION.VoltOrigin = ((uint16_t)(ins[3]) << 8) | (uint16_t)(ins[4]);
+    //                INSTRUCTION.VoltOrigin = Usercode_Correction_to_DAC(INSTRUCTION.VoltOrigin);
+//            }
+//            if (ins[5] | ins[6]) {
+                INSTRUCTION.VoltFinal = ((uint16_t)(ins[5]) << 8) | (uint16_t)(ins[6]);
+    //                INSTRUCTION.VoltFinal = Usercode_Correction_to_DAC(INSTRUCTION.VoltFinal);
+//            }

            if (ins[7] | ins[8]) {
-                Step = ((uint16_t)(ins[7]) << 8) | (uint16_t)(ins[8]);
-                Step = Usercode_Correction_to_DAC(Step);
-            }
-            if (ins[9]) {
-                StepTime = ins[9];
-                StepTime = OldStep2NewStepTime(StepTime);
+                INSTRUCTION.Step = ((uint16_t)(ins[7]) << 8) | (uint16_t)(ins[8]);
+                INSTRUCTION.Step = StepCode2DACcode(INSTRUCTION.Step);
            }
+//            if (ins[9]) {
+                INSTRUCTION.StepTime = ins[9];
+                INSTRUCTION.StepTime = OldStep2NewStepTime(INSTRUCTION.StepTime);
+//            }
            if (ins[10]) {
                INSTRUCTION.CycleNumber = ins[10];
            }
+//            if(ins[11]) {
+                //INSTRUCTION.VoVi_Switch = ins[11];
+                INSTRUCTION.VoVi_Switch = 0x01;
+//            }

            break;
        }

-        case fxnGen: {
-            INSTRUCTION.eliteFxn = fxnGen;
-            uint16_t volt        = 0;
-            int32_t  RealV       = 0;
-            volt                 = ((uint16_t)(ins[3]) << 8) | (uint16_t)(ins[4]);
-            // DAC_outputV(DACOUT, volt); //delete 'command' parameter
-            volt = Usercode_Correction_to_DAC(volt);
-            DAC_outputV(volt);
-            //                    RealV = DAC_to_realV(volt);
-
+        case VOLT_OUTPUT: {
+            INSTRUCTION.eliteFxn = VOLT_OUTPUT;
+            INSTRUCTION.VoltConstant = ( ((uint16_t)(ins[3])) << 8) | (uint16_t)(ins[4]);
            break;
        }

        // impedance test
-        case ZTCurve: {
-            CleanBuffer();
-            INSTRUCTION.eliteFxn = ZTCurve;
+        case ZT_CURVE: {
+//            CleanBuffer();
+            INSTRUCTION.eliteFxn = ZT_CURVE;
+//            INSTRUCTION.VoltConstant = ( ((uint16_t)(ins[3])) << 8) | (uint16_t)(ins[4]);
            break;
        }

-        case VTCurve: {
-            CleanBuffer();
-            INSTRUCTION.eliteFxn = VTCurve;
-            StepTime             = 0x01;
-
+        case VT_CURVE: {
+//            CleanBuffer();
+            INSTRUCTION.eliteFxn = VT_CURVE;
            //                    SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
            //                    VT_Plot(); // enable 10v = 0
            break;
        }

-        case ITCurve: {
-            CleanBuffer();
-            INSTRUCTION.eliteFxn = ITCurve;
-            StepTime             = 0x01;
-//            IT_Plot(); // enable 10v = 1
-
-
+        case IT_CURVE: {
+//            CleanBuffer();
+            INSTRUCTION.eliteFxn = IT_CURVE;
+            //            IT_Plot(); // enable 10v = 1
            break;
        }
-        case SetSampleRate: {
-            uint8_t index      = 0;
-            index              = ins[3];
-            SampleRate         = SampleRateTable[index];
-            SampleRate_counter = 1;
+        case SET_SAMPLE_RATE: {
+            INSTRUCTION.SampleRateIndex = ins[3];
+            INSTRUCTION.SampleRate = SampleRateTable[INSTRUCTION.SampleRateIndex];
+            CT.SampleRate_counter = 1;
            break;
        }
-        case PotentialState: {
-            INSTRUCTION.eliteFxn = PotentialState;
+        case POTENTIAL_STATE: {
+            INSTRUCTION.eliteFxn = POTENTIAL_STATE;

            // test
            not_buf[0] = ins[3];
            not_buf[1] = ins[4];
            not_buf[2] = ins[5];
            not_buf[3] = ins[6];
-            //                    SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
-
+//            SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
            break;
        }

-        case SetADCGain: {
-            ADCGainLevel = ins[3];
+        case CONSTANT_CURRENT:{
+            INSTRUCTION.eliteFxn = CONSTANT_CURRENT;
+            INSTRUCTION.SampleRate = 2;
+            INSTRUCTION.Charge = ins[3];
+            INSTRUCTION.VoltLimit = ((uint16_t) ins[4] << 8) | ((uint16_t) ins[5]);
+            INSTRUCTION.ConstantCurrent = ( (uint32_t) (ins[6])<<24 | (uint32_t) (ins[7])<<16 | (uint32_t) (ins[8])<<8 | (uint32_t) (ins[9]) );
+            INSTRUCTION.NotifyRate = 1000;
+
+//            if(!INSTRUCTION.Charge){
+//                INSTRUCTION.VoltConstant = 50000;
+//            }
+//            GetInstructionParameter(ins+2);
+//            CCCurrent2IUC();
            break;
        }

-        case ADCTEST: {
-            INSTRUCTION.eliteFxn = ADCTEST;
+        case CYCLE_CONSTANT_CURRENT:{
+
+            break;
+        }
+        case SET_ADC_GAIN: {
+            INSTRUCTION.ADCGainLevel = ins[3];
+            if(INSTRUCTION.ADCGainLevel != GAIN_AUTO){
+                INSTRUCTION.AutoGainEnable = 0;
+            }
+            else{
+                INSTRUCTION.AutoGainEnable = 1;
+            }
+//            if(INSTRUCTION.ADCGainLevel == GAIN_200R){
+//                LED_color(DARKLED, 0x0F, 0x00, 0x00);
+//            }
+//            else if(INSTRUCTION.ADCGainLevel == GAIN_10K){
+//                LED_color(DARKLED, 0x0F, 0x00, 0x0F);
+//            }
+//            else if(INSTRUCTION.ADCGainLevel == GAIN_200K){
+//                LED_color(DARKLED, 0x0F, 0x02, 0xFF);
+//            }
+            break;
+        }
+
+        case READ_VOUT_VALUE:{
+//            INSTRUCTION.ResisterMeter = ins[3];
+            INSTRUCTION.eliteFxn = READ_VOUT_VALUE;
+            /*uint8_t ReadVoutBuf[2] = {0};
+
+            ADC_write(0xA4);
+            ADC_read(ReadVoutBuf);
+            SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, 2, ReadVoutBuf);*/
+            break;
+        }
+
+        case ADC_TEST: {
+            INSTRUCTION.eliteFxn = ADC_TEST;
            int32_t ADCRealValue = 0;
            uint8_t CIS_buf[9]   = {0};

-            ADCGainControl(ins[3]);
-            ADCChannelSelect(ins[4]);
-            CPUdelay(1600);
-            ADC_read(spi_ADC_rxbuf);
+//            for(int i=0 ; i<10 ; i++){
+                ADCGainControl(ins[3]);
+                ADCChannelSelect(ins[4]);
+                CPUdelay(10);
+                ADC_read(spi_ADC_rxbuf);
+//                CPUdelay(10);
+//
+//                ADCValueTemp = ( uint16_t) (spi_ADC_rxbuf[0]) << 8 | (uint16_t) (spi_ADC_rxbuf[1]);
+//                ADCValueAVG = ADCValueAVG + ADCValueTemp;
+//            }
+//            ADCValueAVG = ADCValueAVG / 10;
+//            ADCValueTemp = (uint16_t) (ADCValueAVG);

            CIS_buf[0] = chip_ID;
-            for (int i = 0; i < 4; i++) {
-                CIS_buf[i + 1] = spi_ADC_rxbuf[i];
+            for(int i=0; i<4 ; i++){
+                CIS_buf[i+1] = spi_ADC_rxbuf[i];
            }
+//            CIS_buf[1] = (uint8_t) ((ADCValueTemp & 0xFF00) >> 8);
+//            CIS_buf[2] = (uint8_t) (ADCValueTemp & 0x00FF);
+//            CIS_buf[3] = spi_ADC_rxbuf[2];
+//            CIS_buf[4] = spi_ADC_rxbuf[3];

            // decode ADC measure value
            ADCRealValue = DecodeADCValue(ins[3], ins[4], spi_ADC_rxbuf);
@@ -1002,6 +1043,9 @@ static void update_ZM_instruction(uint8 *ins) {
        }

        case VIS_STI: {
+            for(int i=0 ; i<12 ; i++){
+                FlushNotify();
+            }
            PeriodicEvent = true;
            break;
        }
@@ -1013,30 +1057,58 @@ static void update_ZM_instruction(uint8 *ins) {

        case VIS_INT: {
            Eliteinterrupt();
+            for(int i=0 ; i<12 ; i++){
+                FlushNotify();
+            }
            break;
        }

        case VIS_SHIFT_200K: {
            PIN_setOutputValue(pin_handle, Turnon10K, 0);
-            PIN_setOutputValue(pin_handle, Turnon100R, 0);
+            PIN_setOutputValue(pin_handle, Turnon200R, 0);
            LED_color(DARKLED, 0xFF, 0xB4, 0x00);
            break;
        }

        case VIS_SHIFT_10K: {
            PIN_setOutputValue(pin_handle, Turnon10K, 1);
-            PIN_setOutputValue(pin_handle, Turnon100R, 0);
+            PIN_setOutputValue(pin_handle, Turnon200R, 0);
            LED_color(DARKLED, 0x14, 0xC8, 0xFF);
            break;
        }

-        case VIS_SHIFT_100R: {
+        case VIS_SHIFT_200R: {
            PIN_setOutputValue(pin_handle, Turnon10K, 0);
-            PIN_setOutputValue(pin_handle, Turnon100R, 1);
+            PIN_setOutputValue(pin_handle, Turnon200R, 1);
            LED_color(DARKLED, 0xFF, 0xFF, 0xFF);
            break;
        }

+        case VIS_DEVICE_SHINY:{
+            LED_color(DARKLED, 0xFF, 0x00, 0xFF);
+//            uint8_t deviceShinySwitch = (ins[2] & 0b11110000) >> 4;//1:open 0:close
+//            if(deviceShinySwitch == 1){
+//                 LED_color(DARKLED, 0xFF, 0x00, 0xFF);
+//            }else if(deviceShinySwitch == 0){
+//                 if(PeriodicEvent){
+//                      WORKLED();
+//                 }else if(!PeriodicEvent){
+//                     LEDPowerON();
+//                 }
+//            }
+            break;
+        }
+
+        case VIS_SHINY_DIS:{
+             if(PeriodicEvent){
+                  WORKLED();
+             }else if(!PeriodicEvent){
+                 LEDPowerON();
+             }
+
+            break;
+        }
+
        default: {
            break;
        }
@@ -1050,6 +1122,19 @@ static void update_ZM_instruction(uint8 *ins) {
            I2CWrite(0x01, 0xAB);
            break;
        }
+
+        case CIS_VERSION:{
+            cis_buf[0] = VERSION_DATE_YEAR;
+            cis_buf[1] = VERSION_DATE_MONTH;
+            cis_buf[2] = VERSION_DATE_DAY;
+            cis_buf[3] = VERSION_DATE_HOUR;
+            cis_buf[4] = VERSION_DATE_MINUTE;
+
+            SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, BLE_CIS_BUFF_SIZE, cis_buf);
+            break;
+        }
+
+
        }
        break;
    }
@@ -1166,12 +1251,12 @@ static void headstage_gptimer_callback(GPTimerCC26XX_Handle handle, GPTimerCC26X
 /*=======================================
 ==== headstage specific declaration ====
 ======================================*/
-#include "EliteDeviceCorrection.h"
-#include "EliteNotify.h"
-#include "impedance_meter.h"

 /*========================
- ==== gap information ====
+
+
+
+p information ====
 =======================*/

 #ifndef DEVICE_NAME
@@ -0,0 +1,11 @@
+
+#ifndef VERSION_DATE
+#define VERSION_DATE
+
+#define VERSION_DATE_YEAR       20
+#define VERSION_DATE_MONTH      2
+#define VERSION_DATE_DAY        25
+#define VERSION_DATE_HOUR       18
+#define VERSION_DATE_MINUTE     32
+
+#endif
@@ -102,6 +102,7 @@

 #include "simple_peripheral.h"

+#include "EliteGPTimer.h"
 #include "headstage.h"

 #if defined(USE_FPGA) || defined(DEBUG_SW_TRACE)
@@ -527,6 +528,8 @@ static void SimpleBLEPeripheral_init(void) {
    HCI_LE_ReadMaxDataLenCmd();
 }

+
+#include "EliteWorkData.h"
 /*********************************************************************
 * @fn      SimpleBLEPeripheral_taskFxn
 *
@@ -540,20 +543,23 @@ static void SimpleBLEPeripheral_init(void) {
 // static void detectKey_clockHandler(UArg arg);

 static void SimpleBLEPeripheral_taskFxn(UArg a0, UArg a1) {
+
+#define CLOCK_ONE_SECOND 10000
    // Initialize application
    SimpleBLEPeripheral_init();
    headstage_init_device_info();
-    //    headstage_gptimer_init();

    ZM_init();
    Elite_SPI_init();
+    WorkMode *WorkModeData = CreateWorkMode();

    uint8_t key         = 0;
-    uint8_t counter6994 = 0;
+    uint16_t counter6994 = 0;
    bool    EliteOn     = 0;

-    Util_constructClock(&periodicClock, SimpleBLEPeripheral_clockHandler, SBP_PERIODIC_EVT_PERIOD, 0, false, SBP_PERIODIC_EVT);  // create a clock clockduration = 42(~=0.01 sec)
-    Util_startClock(&periodicClock);  // start the clock, timeup => call SimpleBLEPeripheral_clockHandler => wake up the device
+    // init DAC, set output ~= 0 V
+    DAC_outputV(Usercode_Correction_to_DAC(25000));
+    elite_gptimer_start();

    // Application main loops
    for (;;) {
@@ -602,16 +608,16 @@ static void SimpleBLEPeripheral_taskFxn(UArg a0, UArg a1) {
                    ICall_free(pMsg);
                }
            }
-
+        }
+        if(events & SBP_PERIODIC_EVT){
+            events &= ~SBP_PERIODIC_EVT;
            if (!PeriodicEvent) {                 // if there is no periodic event
-                Util_startClock(&periodicClock);  // manually restart the clock
                key = PIN_getInputValue(switch_on);
                if (EliteOn) {
-                    if (counter6994 < 175) {  // counter6994 enable a IC after 35 counts
+                    if (counter6994 < CLOCK_ONE_SECOND/2) {  // counter6994 enable a IC after 35 counts
                        counter6994++;
-                    } else if (counter6994 == 175) {
+                    } else if (counter6994 == CLOCK_ONE_SECOND/2) {
                        PIN_setOutputValue(pin_handle, shutdown_6994, 1);  // OFF = 1 => turn off 6994
-
                        //                        #ifdef ELITE_VERSION_1_4
                        //                        SPI_close(spiHandle0);
                        //                        I2Cinit();
@@ -621,26 +627,37 @@ static void SimpleBLEPeripheral_taskFxn(UArg a0, UArg a1) {
                        counter6994++;
                    }
                    EliteKeyPress(key);
+                    if(Free_Work_Mode){
+                        FreeWorkMode(WorkModeData);
+                        InitEliteInstruction();
+                        ADCGainControl(INSTRUCTION.ADCGainLevel);
+                        DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoltConstant));

+                        Free_Work_Mode = false;
+                    }
                } else {
                    EliteOn = TurnOnElite(key);
                }
-                // if(DAC_reset) DAC_outputV(0x0000); //set DAC to 0v when no periodic event
-            } else {                              // if there is periodic event
-                Util_startClock(&periodicClock);  // manually restart the clock
-                SimpleBLEPeripheral_performPeriodicTask();
+            }
+            // if there is periodic event
+            else {
+                if(InitPeriodicEvent){
+                    InitWorkMode(WorkModeData);
+                    InitPeriodicEvent = false;
+                }
+
+                // Perform periodic application task
+                SimpleBLEPeripheral_performPeriodicTask(WorkModeData);
+
+                // Turn off Elite if battery  voltage < 3V
+//                ReadBatVolt(spi_ADC_rxbuf);

                key = PIN_getInputValue(switch_on);
                EliteKeyPress(key);  // onPress=> key = 0; 1.lighten LED 2.long press shut down 2650
+
            }
        }
-//         if(events & SBP_PERIODIC_EVT){
-//             Util_startClock(&periodicClock);
-//             events &= ~SBP_PERIODIC_EVT;

-// //            Perform periodic application task
-//             SimpleBLEPeripheral_performPeriodicTask();
-//         }
        //        if (events & SBP_PERIODIC_EVT)
        //        {
        //          events &= ~SBP_PERIODIC_EVT;
@@ -0,0 +1,91 @@
+#!/bin/bash
+
+#input="./Elite_test.txt"
+input="D:/Elite/Calibration_data/$1.txt"
+output="./simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteDeviceCorrection.h"
+
+#variable
+declare -i current_line=79
+declare -i col_index=0
+declare -i row_index=0
+#declare -i coeff=1
+#declare -i offset=0
+
+declare -i current_gain=0
+#declare -i vin_gain=0
+#declare -i vout_gain=0
+MAC="MAC"
+
+#constant
+declare -i ADC_CURRENT_GAIN_NUMBER=3
+declare -i ADC_VOLTAGE_GAIN_NUMBER=1
+declare -i DAC_GAIN_NUMBER=1
+
+while read -r line; do
+    for word in $line; do
+        # get device MAC
+        if [ $row_index -eq 0 ] && [ $col_index -eq 1 ];then
+          MAC=$word
+          sed -i "${current_line} i  {" "$output"
+          sed -i "${current_line} i  \\\n#ifdef BOARD_${MAC}" "$output"
+          sed -i 's/:/_/g' "$output"
+          current_line=$current_line+3
+        fi
+
+        #get ADC current cali data
+        declare -i Iin_range=2+$ADC_CURRENT_GAIN_NUMBER
+        if [ $row_index -gt 1 ] && [ $row_index -lt $Iin_range ];then
+
+          if [ $col_index -eq 1 ];then
+            sed -i "${current_line} i \\\t.ADC_current[${current_gain}].coeff = ($word)," "$output"
+            current_line=$current_line+1
+
+          elif [ $col_index -eq 2 ];then
+            sed -i "${current_line} i \\\t.ADC_current[${current_gain}].offset = ($word)," "$output"
+            current_line=$current_line+1
+
+            if [ $current_gain -lt 2 ];then
+              current_gain=$current_gain+1
+            else
+              current_gain=0
+            fi
+          fi
+
+        #get DAC Vout cali data
+        declare -i Vout_range=$Iin_range+$DAC_GAIN_NUMBER
+        elif [ $row_index -gt 1 ] && [ $row_index -lt $Vout_range ];then
+          if [ $col_index -eq 1 ];then
+            sed -i "${current_line} i \\\t.Usercode2DAC.coeff = ($word)," "$output"
+            current_line=$current_line+1
+
+          elif [ $col_index -eq 2 ];then
+            sed -i "${current_line} i \\\t.Usercode2DAC.offset = ($word)," "$output"
+            current_line=$current_line+1
+          fi
+
+        #get ADC Vin cali data
+        declare -i Vin_range=$Vout_range+$ADC_VOLTAGE_GAIN_NUMBER
+        elif [ $row_index -gt 1 ] && [ $row_index -lt $Vin_range ];then
+          if [ $col_index -eq 1 ];then
+            sed -i "${current_line} i \\\t.ADC_volt.coeff = ($word)," "$output"
+            current_line=$current_line+1
+
+          elif [ $col_index -eq 2 ];then
+            sed -i "${current_line} i \\\t.ADC_volt.offset = ($word)," "$output"
+            current_line=$current_line+1
+          fi
+        fi
+
+        #update index
+        if [ $col_index -lt 2 ];then
+          col_index=$col_index+1
+        else
+          col_index=0
+          row_index=$row_index+1
+        fi
+    done
+done < $input
+
+sed -i "${current_line} i };" "$output"
+current_line=$current_line+1
+sed -i "${current_line} i #endif" "$output"