Modify(#2): remove Display code

simplelink/ble_sdk_2_02_02_25/src/boards/BOOSTXL_CC2650MA/BOOSTXL_CC2650MA.c

@@ -193,49 +193,63 @@ const UDMACC26XX_Config UDMACC26XX_config[] = {
  *  ========================== SPI DMA begin ===================================
  */
 /* Place into subsections to allow the TI linker to remove items properly */
-// #if defined(__TI_COMPILER_VERSION__)
-// #pragma DATA_SECTION(SPI_config, ".const:SPI_config")
-// #pragma DATA_SECTION(spiCC26XXDMAHWAttrs, ".const:spiCC26XXDMAHWAttrs")
-// #endif
+#if defined(__TI_COMPILER_VERSION__)
+#pragma DATA_SECTION(SPI_config, ".const:SPI_config")
+#pragma DATA_SECTION(spiCC26XXDMAHWAttrs, ".const:spiCC26XXDMAHWAttrs")
+#endif
 
-// /* Include drivers */
-// #include <ti/drivers/spi/SPICC26XXDMA.h>
+/* Include drivers */
+#include <ti/drivers/spi/SPICC26XXDMA.h>
 
-// /* SPI objects */
-// SPICC26XXDMA_Object spiCC26XXDMAObjects[BOOSTXL_CC2650MA_SPICOUNT];
+/* SPI objects */
+SPICC26XXDMA_Object spiCC26XXDMAObjects[BOOSTXL_CC2650MA_SPICOUNT];
 
-// /* SPI configuration structure, describing which pins are to be used */
-// const SPICC26XXDMA_HWAttrsV1 spiCC26XXDMAHWAttrs[BOOSTXL_CC2650MA_UDMACOUNT] = {
-//     {
-//         .baseAddr           = SSI0_BASE,
-//         .intNum             = INT_SSI0_COMB,
-//         .intPriority        = ~0,
-//         .swiPriority        = 0,
-//         .powerMngrId        = PowerCC26XX_PERIPH_SSI0,
-//         .defaultTxBufValue  = 0,
-//         .rxChannelBitMask   = 1<<UDMA_CHAN_SSI0_RX,
-//         .txChannelBitMask   = 1<<UDMA_CHAN_SSI0_TX,
-//         .mosiPin            = Board_SPI0_MOSI,
-//         .misoPin            = Board_SPI0_MISO,
-//         .clkPin             = Board_SPI0_CLK,
-//         .csnPin             = Board_SPI0_CS
-//     },
-// };
+/* SPI configuration structure, describing which pins are to be used */
+const SPICC26XXDMA_HWAttrsV1 spiCC26XXDMAHWAttrs[BOOSTXL_CC2650MA_SPICOUNT] = {
+    {
+        .baseAddr           = SSI0_BASE,
+        .intNum             = INT_SSI0_COMB,
+        .intPriority        = ~0,
+        .swiPriority        = 0,
+        .powerMngrId        = PowerCC26XX_PERIPH_SSI0,
+        .defaultTxBufValue  = 0,
+        .rxChannelBitMask   = 1<<UDMA_CHAN_SSI0_RX,
+        .txChannelBitMask   = 1<<UDMA_CHAN_SSI0_TX,
+        .mosiPin            = Board_SPI0_MOSI,
+        .misoPin            = Board_SPI0_MISO,
+        .clkPin             = Board_SPI0_CLK,
+        .csnPin             = Board_SPI0_CS
+    },
+    {
+        .baseAddr           = SSI1_BASE,
+        .intNum             = INT_SSI1_COMB,
+        .intPriority        = ~0,
+        .swiPriority        = 0,
+        .powerMngrId        = PowerCC26XX_PERIPH_SSI1,
+        .defaultTxBufValue  = 0,
+        .rxChannelBitMask   = 1<<UDMA_CHAN_SSI1_RX,
+        .txChannelBitMask   = 1<<UDMA_CHAN_SSI1_TX,
+        .mosiPin            = Board_SPI1_MOSI,
+        .misoPin            = Board_SPI1_MISO,
+        .clkPin             = Board_SPI1_CLK,
+        .csnPin             = Board_SPI1_CS
+    },  
+};
 
-// /* SPI configuration structure */
-// const SPI_Config SPI_config[] = {
-//     {
-//          .fxnTablePtr = &SPICC26XXDMA_fxnTable,
-//          .object      = &spiCC26XXDMAObjects[0],
-//          .hwAttrs     = &spiCC26XXDMAHWAttrs[0]
-//     },
-//     {
-//          .fxnTablePtr = &SPICC26XXDMA_fxnTable,
-//          .object      = &spiCC26XXDMAObjects[1],
-//          .hwAttrs     = &spiCC26XXDMAHWAttrs[1]
-//     },
-//     {NULL, NULL, NULL}
-// };
+/* SPI configuration structure */
+const SPI_Config SPI_config[] = {
+    {
+         .fxnTablePtr = &SPICC26XXDMA_fxnTable,
+         .object      = &spiCC26XXDMAObjects[0],
+         .hwAttrs     = &spiCC26XXDMAHWAttrs[0]
+    },
+    {
+         .fxnTablePtr = &SPICC26XXDMA_fxnTable,
+         .object      = &spiCC26XXDMAObjects[1],
+         .hwAttrs     = &spiCC26XXDMAHWAttrs[1]
+    },
+    {NULL, NULL, NULL}
+};
 /*
  *  ========================== SPI DMA end =====================================
 */
@@ -423,3 +437,44 @@ const PWM_Config PWM_config[BOOSTXL_CC2650MA_PWMCOUNT + 1] = {
 /*
  *  ============================= PWM end ======================================
  */
+
+/*
+ *  ============================= I2C Begin=====================================
+*/
+/* Place into subsections to allow the TI linker to remove items properly */
+#if defined(__TI_COMPILER_VERSION__)
+#pragma DATA_SECTION(I2C_config, ".const:I2C_config")
+#pragma DATA_SECTION(i2cCC26xxHWAttrs, ".const:i2cCC26xxHWAttrs")
+#endif
+
+/* Include drivers */
+#include <ti/drivers/i2c/I2CCC26XX.h>
+
+/* I2C objects */
+I2CCC26XX_Object i2cCC26xxObjects[BOOSTXL_CC2650MA_I2CCOUNT];
+
+/* I2C configuration structure, describing which pins are to be used */
+const I2CCC26XX_HWAttrsV1 i2cCC26xxHWAttrs[BOOSTXL_CC2650MA_I2CCOUNT] = {
+    {
+        .baseAddr = I2C0_BASE,
+        .powerMngrId = PowerCC26XX_PERIPH_I2C0,
+        .intNum = INT_I2C_IRQ,
+        .intPriority = ~0,
+        .swiPriority = 0,
+        .sdaPin = Board_I2C0_SDA0,
+        .sclPin = Board_I2C0_SCL0,
+    }
+};
+
+/* I2C configuration structure */
+const I2C_Config I2C_config[] = {
+    {
+        .fxnTablePtr = &I2CCC26XX_fxnTable,
+        .object = &i2cCC26xxObjects[0],
+        .hwAttrs = &i2cCC26xxHWAttrs[0]
+    },
+    {NULL, NULL, NULL}
+};
+/*
+ *  ========================== I2C end =========================================
+ */

simplelink/ble_sdk_2_02_02_25/src/boards/BOOSTXL_CC2650MA/BOOSTXL_CC2650MA.h

@@ -50,6 +50,7 @@ extern "C" {
  *  ==========================================================================*/
 #include <ti/drivers/PIN.h>
 #include <driverlib/ioc.h>
+// #include "application_config/application_config.h"
 
 /** ============================================================================
  *  Externs
@@ -145,12 +146,6 @@ extern const PIN_Config BoardGpioInitTable[];
 #define Board_UART_TX                  Board_BP_UART_Rx          /* RXD */
 #define Board_UART_RX                  Board_BP_UART_Tx          /* TXD */
 
-// /* SPI Board */
-// #define Board_SPI0_MISO                Board_BP_SPI_MISO
-// #define Board_SPI0_MOSI                Board_BP_SPI_MOSI
-// #define Board_SPI0_CLK                 Board_BP_SPI_CLK
-// #define Board_SPI0_CS                  Board_BP_SPI_CS_Wireless
-
 /* Power Management Board */
 #define Board_SRDY                     Board_BP_Pin_J2_19
 #define Board_MRDY                     Board_BP_Pin_J1_2
@@ -165,12 +160,43 @@ extern const PIN_Config BoardGpioInitTable[];
 #define Board_PWMPIN6                  PIN_UNASSIGNED
 #define Board_PWMPIN7                  PIN_UNASSIGNED
 
+/* SPI & I2C Board */
+#ifndef DEF_ELITE_MODEL
+#define Board_SPI0_MISO                Board_BP_SPI_MISO
+#define Board_SPI0_MOSI                Board_BP_SPI_MOSI
+#define Board_SPI0_CLK                 Board_BP_SPI_CLK
+#define Board_SPI0_CS                  Board_BP_SPI_CS_Wireless
+
+#define Board_SPI1_MISO                PIN_UNASSIGNED
+#define Board_SPI1_MOSI                PIN_UNASSIGNED
+#define Board_SPI1_CLK                 PIN_UNASSIGNED
+#define Board_SPI1_CS                  PIN_UNASSIGNED
+
+#define Board_I2C0_SCL0                PIN_UNASSIGNED 
+#define Board_I2C0_SDA0                PIN_UNASSIGNED
+#else
+#define Board_SPI0_MISO                E_SPI0_MISO
+#define Board_SPI0_MOSI                E_SPI0_MOSI
+#define Board_SPI0_CLK                 E_SPI0_CLK
+#define Board_SPI0_CS                  E_SPI0_CS
+
+#define Board_SPI1_MISO                E_SPI1_MISO
+#define Board_SPI1_MOSI                E_SPI1_MOSI
+#define Board_SPI1_CLK                 E_SPI1_CLK
+#define Board_SPI1_CS                  E_SPI1_CS
+
+#define Board_I2C0_SCL0                E_I2C0_SCL0 
+#define Board_I2C0_SDA0                E_I2C0_SDA0
+#endif
+
 /** ============================================================================
  *  Instance identifiers
  *  ==========================================================================*/
 /* Generic SPI instance identifiers */
 #define Board_SPI0                  BOOSTXL_CC2650MA_SPI0
 #define Board_SPI1                  BOOSTXL_CC2650MA_SPI1
+/* Generic I2C instance identifiers */
+#define Board_I2C0                  BOOSTXL_CC2650MA_I2C0
 /* Generic UART instance identifiers */
 #define Board_UART                  BOOSTXL_CC2650MA_UART0
 /* Generic TRNG instance identiifer */
@@ -209,15 +235,16 @@ typedef enum BOOSTXL_CC2650MA_CryptoName {
 } BOOSTXL_CC2650MA_CryptoName;
 
 
-// /*!
-//  *  @def    BOOSTXL_CC2650MA_SPIName
-//  *  @brief  Enum of SPI names on the CC2650 Booster Pack
-//  */
-// typedef enum BOOSTXL_CC2650MA_SPIName {
-//     BOOSTXL_CC2650MA_SPI0 = 0,
+/*!
+ *  @def    BOOSTXL_CC2650MA_SPIName
+ *  @brief  Enum of SPI names on the CC2650 Booster Pack
+ */
+typedef enum BOOSTXL_CC2650MA_SPIName {
+    BOOSTXL_CC2650MA_SPI0 = 0,
+    BOOSTXL_CC2650MA_SPI1 = 1,
 
-//     BOOSTXL_CC2650MA_SPICOUNT
-// } BOOSTXL_CC2650MA_SPIName;
+    BOOSTXL_CC2650MA_SPICOUNT
+} BOOSTXL_CC2650MA_SPIName;
 
 /*!
  *  @def    BOOSTXL_CC2650MA_TRNGName
@@ -295,6 +322,16 @@ typedef enum BOOSTXL_CC2650MA_PWM
     BOOSTXL_CC2650MA_PWMCOUNT
 } BOOSTXL_CC2650MA_PWM;
 
+/*!
+ *  @def    BOOSTXL_CC2650MA_I2CName
+ *  @brief  Enum of I2C names on the CC2650 Booster Pack
+ */
+typedef enum BOOSTXL_CC2650MA_I2CName {
+    BOOSTXL_CC2650MA_I2C0 = 0,
+
+    BOOSTXL_CC2650MA_I2CCOUNT
+} BOOSTXL_CC2650MA_I2CName;
+
 #ifdef __cplusplus
 }
 #endif

simplelink/ble_sdk_2_02_02_25/src/boards/BOOSTXL_CC2650MA/Board.h

@@ -60,6 +60,7 @@ extern "C" {
 #define     Board_initGPIO()
 #define     Board_initPWM()         PWM_init()
 #define     Board_initSPI()         SPI_init()
+#define     Board_initI2C()         I2C_init()
 #define     Board_initUART()        UART_init()
 #define     Board_initWatchdog()    Watchdog_init()
 #define     GPIO_toggle(n)

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite.json

@@ -1,179 +0,0 @@
-{
-  "name": "Elite-ZM",
-  "version": "1.2.30",
-  "match_rule": {
-    "local_name_pattern": "Elite-ZM.+",
-    "major_product_number": 0,
-    "minor_product_number": 2,
-    "major_version_number": 1,
-    "minor_version_number": 2
-  },
-  "constant": {
-    "ADC_CHANNEL_NUMBER": [
-      12,
-      13,
-      14,
-      15
-    ],
-    "VOLT_MAX": 4095
-  },
-  "parameters": {
-    "CHANNEL": {
-      "description": "record channels",
-      "record_meta": true,
-      "domain": "property",
-      "value": [
-        0,
-        1,
-        2
-      ]
-    },
-    "SAMPLE_RATE": {
-      "description": "data sampling rate",
-      "record_meta": true,
-      "domain": "constant",
-      "value": 1
-    },
-    "AMP_GAIN": {
-      "description": "amp gain",
-      "record_meta": true,
-      "domain": "constant",
-      "value": 1
-    },
-    "MODE": {
-      "description": "working mode",
-      "value": [
-        "I-V Curve",
-        "Cyclic Voltammetry",
-        "Function Generator",
-        "Z-T Curve",
-        "V-T Curve",
-        "I-T Curve",
-        "ADC test"
-      ]
-    },
-    "VOLT_ORIGIN": {
-      "description": "Origin Voltage of Scan",
-      "domain": [
-        "VOLT_MAX"
-      ]
-    },
-    "VOLT_FINAL": {
-      "description": "The last Voltage of Scan",
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": "1365 * VALUE"
-    },
-    "VOLT_STEP": {
-      "description": "Voltage Step",
-      "domain": [
-        5
-      ]
-    },
-    "STEP_TIME": {
-      "description": "How much time between two step",
-      "domain": [
-        4
-      ]
-    },
-    "DAC_VOLT": {
-      "description": "DAC output Voltage",
-      "domain": [
-        "VOLT_MAX"
-      ]
-    },
-    "ADC_CHANNEL": {
-      "description": "read ADC data",
-      "value": [
-        "ANA0",
-        "ANA1",
-        "ANA2",
-        "ANA3"
-      ]
-    }
-  },
-  "instruction": {
-    "start": [
-      {
-        "expression": "MODE",
-        "when": {
-          "0": "curve_iv",
-          "1": "curve_cv",
-          "2": "func_gen",
-          "6": "adc_test"
-        }
-      }
-    ],
-    "data_format": [
-      "_data_format('TDC4VAF2')"
-    ],
-    "curve_iv": [
-      "data_format",
-      "_notify(True)",
-      "curve_iv0",
-      "_sync(True)",
-      "VIS_STI"
-    ],
-    "curve_iv0": {
-      "type": "RIS",
-      "parameter": {
-        "va": "(VOLT_ORIGIN + 1) * 0x0010",
-        "vb": "(VOLT_FINAL + 1) * 0x0010",
-        "dv": "VOLT_STEP * 0x40",
-        "dt": "STEP_TIME * 0x12"
-      },
-      "data": [
-        "1X10;2B>va;2B>vb;B>dv;B>dt"
-      ]
-    },
-    "curve_cv": [
-      "data_format",
-      "_notify(True)",
-      "curve_cv0",
-      "_sync(True)",
-      "VIS_STI"
-    ],
-    "curve_cv0": {
-      "type": "RIS",
-      "parameter": {
-        "va": "(VOLT_ORIGIN + 1) * 0x0010",
-        "vb": "(VOLT_FINAL + 1) * 0x0010",
-        "dv": "VOLT_STEP * 0x40",
-        "dt": "STEP_TIME * 0x12"
-      },
-      "data": [
-        "1X20;2B>va;2B>vb;B>dv;B>dt"
-      ]
-    },
-    "func_gen": [
-      "data_format",
-      "func_gen0",
-      "VIS_STI"
-    ],
-    "func_gen0": {
-      "type": "RIS",
-      "parameter": {
-        "v": "(DAC_VOLT + 1) * 0x0010"
-      },
-      "data": [
-        "X30;X30;2B>v"
-      ]
-    },
-    "adc_test": [
-      "data_format",
-      "_notify(True)",
-      "adc_test0",
-      "_sync(True)",
-      "VIS_STI"
-    ],
-    "adc_test0": {
-      "type": "RIS",
-      "data": [
-        "X90;B>ADC_CHANNEL"
-      ]
-    }
-  }
-}
-
-

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite15_PIN.h

@@ -1,246 +0,0 @@
-
-#ifndef Elite15_PIN
-#define Elite_15PIN
-
-#include "Elite_PIN.h"
-
-static void update_latch_status (uint32_t latch_num, uint32_t elite_pin, bool highlow) {
-    switch (latch_num) {
-        case LOAD0: {
-            switch (elite_pin) {
-                case D0: {
-                    LH.LATCH0[0] = highlow;
-                    break;
-                }
-                case D1: {
-                    LH.LATCH0[1] = highlow;
-                    break;
-                }
-                case D2: {
-                    LH.LATCH0[2] = highlow;
-                    break;
-                }
-                case D3: {
-                    LH.LATCH0[3] = highlow;
-                    break;
-                }
-                case D4: {
-                    LH.LATCH0[4] = highlow;
-                    break;
-                }
-                case D5: {
-                    LH.LATCH0[5] = highlow;
-                    break;
-                }
-                case D6: {
-                    LH.LATCH0[6] = highlow;
-                    break;
-                }
-                case D7: {
-                    LH.LATCH0[7] = highlow;
-                    break;
-                }
-                default: {
-                    break;
-                }
-            }
-            break;
-        }
-        case LOAD1: {
-            switch (elite_pin) {
-                case D0: {
-                    LH.LATCH1[0] = highlow;
-                    break;
-                }
-                case D1: {
-                    LH.LATCH1[1] = highlow;
-                    break;
-                }
-                case D2: {
-                    LH.LATCH1[2] = highlow;
-                    break;
-                }
-                case D3: {
-                    LH.LATCH1[3] = highlow;
-                    break;
-                }
-                case D4: {
-                    LH.LATCH1[4] = highlow;
-                    break;
-                }
-                case D5: {
-                    LH.LATCH1[5] = highlow;
-                    break;
-                }
-                case D6: {
-                    LH.LATCH1[6] = highlow;
-                    break;
-                }
-                case D7: {
-                    LH.LATCH1[7] = highlow;
-                    break;
-                }
-                default: {
-                    break;
-                }
-            }
-            break;
-        }
-        case LOAD2: {
-            switch (elite_pin) {
-                case D0: {
-                    LH.LATCH2[0] = highlow;
-                    break;
-                }
-                case D1: {
-                    LH.LATCH2[1] = highlow;
-                    break;
-                }
-                case D2: {
-                    LH.LATCH2[2] = highlow;
-                    break;
-                }
-                case D3: {
-                    LH.LATCH2[3] = highlow;
-                    break;
-                }
-                case D4: {
-                    LH.LATCH2[4] = highlow;
-                    break;
-                }
-                case D5: {
-                    LH.LATCH2[5] = highlow;
-                    break;
-                }
-                case D6: {
-                    LH.LATCH2[6] = highlow;
-                    break;
-                }
-                case D7: {
-                    LH.LATCH2[7] = highlow;
-                    break;
-                }
-                default: {
-                    break;
-                }
-            }
-             break;
-        }
-        default: {
-            break;
-        }
-    }
-}
-
-static void PIN15_setOutputValue (uint32_t latch_num, uint32_t pin_num, bool highlow) {
-    ELITE15_SPI_CLOSE();
-    add_elite_pin();
-    update_latch_status (latch_num, pin_num, highlow);
-//    PIN_setOutputValue(&ZM_rst, latch_num, 1);               // Turn on latch
-
-    switch (latch_num) {
-        case LOAD0: {
-//            PIN_setOutputValue(&ZM_rst, D0, LH.LATCH0[0]);
-//            PIN_setOutputValue(&ZM_rst, D1, LH.LATCH0[1]);
-//            PIN_setOutputValue(&ZM_rst, D2, LH.LATCH0[2]);
-//            PIN_setOutputValue(&ZM_rst, D3, LH.LATCH0[3]);
-            PIN_setOutputValue(pin_handle, D4, LH.LATCH0[4]);
-            PIN_setOutputValue(pin_handle, D5, LH.LATCH0[5]);
-            PIN_setOutputValue(pin_handle, D6, LH.LATCH0[6]);
-            PIN_setOutputValue(pin_handle, D7, LH.LATCH0[7]);
-            break;
-        }
-        case LOAD1: {
-            PIN_setOutputValue(pin_handle, D0, LH.LATCH1[0]);
-            PIN_setOutputValue(pin_handle, D1, LH.LATCH1[1]);
-            PIN_setOutputValue(pin_handle, D2, LH.LATCH1[2]);
-            PIN_setOutputValue(pin_handle, D3, LH.LATCH1[3]);
-            PIN_setOutputValue(pin_handle, D4, LH.LATCH1[4]);
-            PIN_setOutputValue(pin_handle, D5, LH.LATCH1[5]);
-            PIN_setOutputValue(pin_handle, D6, LH.LATCH1[6]);
-            PIN_setOutputValue(pin_handle, D7, LH.LATCH1[7]);
-            break;
-        }
-        case LOAD2: {
-            PIN_setOutputValue(pin_handle, D0, LH.LATCH2[0]);
-            PIN_setOutputValue(pin_handle, D1, LH.LATCH2[1]);
-            PIN_setOutputValue(pin_handle, D2, LH.LATCH2[2]);
-            PIN_setOutputValue(pin_handle, D3, LH.LATCH2[3]);
-            PIN_setOutputValue(pin_handle, D4, LH.LATCH2[4]);
-            PIN_setOutputValue(pin_handle, D5, LH.LATCH2[5]);
-            PIN_setOutputValue(pin_handle, D6, LH.LATCH2[6]);
-            PIN_setOutputValue(pin_handle, D7, LH.LATCH2[7]);
-            break;
-        }
-        default: {
-            break;
-        }
-    }
-    PIN_setOutputValue(&ZM_rst, latch_num, 1);               // Turn on latch
-//    CPUdelay(10);
-    PIN_setOutputValue(&ZM_rst, latch_num, 0);               // Turn off latch
-    remove_elite_pin();
-    ELITE15_SPI_HOLD();
-}
-
-static void Init_Elite15_PIN () {
-    InitLH();
-    add_elite_pin();
-
-    PIN_setOutputValue(pin_handle, D0, 0);
-    PIN_setOutputValue(pin_handle, D1, 0);
-    PIN_setOutputValue(pin_handle, D2, 0);
-    PIN_setOutputValue(pin_handle, D3, 0);
-    PIN_setOutputValue(pin_handle, D4, 0);
-    PIN_setOutputValue(pin_handle, D5, 0);
-    PIN_setOutputValue(pin_handle, D6, 0);
-    PIN_setOutputValue(pin_handle, D7, 0);
-    PIN_setOutputValue(pin_handle, LOAD0, 0);
-    PIN_setOutputValue(pin_handle, LOAD1, 1);
-    PIN_setOutputValue(pin_handle, LOAD2, 1);
-    CPUdelay(10);
-    PIN_setOutputValue(pin_handle, LOAD1, 0);
-    PIN_setOutputValue(pin_handle, LOAD2, 0);
-
-
-    PIN_setOutputValue(pin_handle, D0, 0);
-    PIN_setOutputValue(pin_handle, D1, 0);
-    PIN_setOutputValue(pin_handle, D2, 0);
-    PIN_setOutputValue(pin_handle, D3, 0);
-    PIN_setOutputValue(pin_handle, D4, 1);
-    PIN_setOutputValue(pin_handle, D5, 1);
-    PIN_setOutputValue(pin_handle, D6, 1);
-    PIN_setOutputValue(pin_handle, D7, 1);
-    CPUdelay(10);
-    PIN_setOutputValue(pin_handle, LOAD0, 1);
-    PIN_setOutputValue(pin_handle, LOAD0, 0);
-
-    remove_elite_pin();
-
-//    InitLH();
-//    add_elite_pin();
-//
-//    PIN_setOutputValue(pin_handle, LOAD0, 1);
-//    PIN_setOutputValue(pin_handle, LOAD1, 1);
-//    PIN_setOutputValue(pin_handle, LOAD2, 1);
-//    CPUdelay(10);
-//    PIN_setOutputValue(pin_handle, D0, 0);
-//    PIN_setOutputValue(pin_handle, D1, 0);
-//    PIN_setOutputValue(pin_handle, D2, 0);
-//    PIN_setOutputValue(pin_handle, D3, 0);
-//    PIN_setOutputValue(pin_handle, D4, 0);
-//    PIN_setOutputValue(pin_handle, D5, 0);
-//    PIN_setOutputValue(pin_handle, D6, 0);
-//    PIN_setOutputValue(pin_handle, D7, 0);
-//    CPUdelay(10);
-//    PIN_setOutputValue(pin_handle, LOAD0, 0);
-//    PIN_setOutputValue(pin_handle, LOAD1, 0);
-//    PIN_setOutputValue(pin_handle, LOAD2, 0);
-//
-//    remove_elite_pin();
-}
-
-
-
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteADC.h

@@ -1,692 +0,0 @@
-/*=============================================================================
- =                          EliteADC.h                                        =
- =============================================================================*/
-#ifndef EliteADC
-#define EliteADC
-
-#include "Elite_PIN.h"
-#include "EliteSPI.h"
-
-// ADC command, Elite will use these cmd to control ADC
-#define CMD_CURRENT_MEASURE 0xC5
-#define CMD_VOLT_MEASURE    0xD5
-#define CMD_DAC_MEASURE     0xE5
-#define CMD_BATTERY_MEASURE 0xF1
-
-// controller command, these are command from control box
-#define ADC_CH_CURR         0x00
-#define ADC_CH_VIN          0x01
-#define ADC_CH_VOUT         0x02
-#define ADC_CH_BAT          0x03
-
-/* for Elite1.5-re */
-// Iin theoretical boundary <2.67, 1.89~80, 63~2600, >1900 (uA)
-#define I_GAIN_SMALL_BOUNDARY     4000  // 4    uA =     4,000,000 pA
-#define I_GAIN_MID1_BOUNDARY1     2500  // 2.5  uA =     2,500,000 pA
-#define I_GAIN_MID1_BOUNDARY2   100000  // 100  uA =   100,000,000 pA
-#define I_GAIN_MID2_BOUNDARY1    85000  // 85   uA =    85,000,000 pA
-#define I_GAIN_MID2_BOUNDARY2  2050000  // 2050 uA =     2,050,000 nA
-#define I_GAIN_LARGE_BOUNDARY  1800000  // 1800 uA =     1,800,000 nA
-
-// Vin theoretical boundary <7, 5~200, >100 (mV)
-#define VIN_GAIN_SMALL_BOUNDARY   7000  // 7    mV =     7,000,000 nV
-#define VIN_GAIN_MID1_BOUNDARY1   5000  // 5    mV =     5,000,000 nV
-#define VIN_GAIN_MID1_BOUNDARY2 300000  // 300  mV =   300,000,000 nV
-#define VIN_GAIN_LARGE_BOUNDARY 250000  // 250  mV =   250,000,000 nV
-
-/*
- * define how long damping time for automatic current stalls, to skip damping time
- * high level switch to low level has 80ms damping time (CE request that skipping 50ms)
- * 0 level switch to 1 level has 5ms damping time
- *
- */
-#define CNT_H2L_IIN_VIN_VOUT_PLOT   5   // need skip 5 * 12ms = 60ms notify data
-#define CNT_L2H_IIN_VIN_VOUT_PLOT   1   // need skip 1 * 12ms = 12ms notify data
-#define CNT_H2L_IIN_VIN_PLOT        7   // 7 * 8ms = 56ms
-#define CNT_L2H_IIN_VIN_PLOT        1   // 1 * 8ms = 8ms
-#define CNT_H2L_IT_PLOT             13  // 13 * 4ms = 52ms
-#define CNT_L2H_IT_PLOT             2   // 2 * 4ms = 8ms
-
-void IinADCGainCtrl(uint8_t IinADCLevel);
-void VinADCGainCtrl(uint8_t VinADCLevel);
-void read_adc_raw_data(uint8_t AdcChannel, uint8_t *rxbuf, uint8_t *txbuf);
-void AutoGainChangeIin(int32_t RealCurrent, uint16_t plot_type, uint16_t *no_rec_time);
-void AutoGainChangeVin(int32_t RealVin);
-
-/*=============================================================================
- =                          EliteADC.c                                        =
- =============================================================================*/
-
-static void __ADC_write(uint8_t ADCin, uint8_t *rxbuf, uint8_t *txbuf)
-{
-   /*
-    *   write SPI to get ADC value
-    *   This function can only define [15]~[8] through ADCin
-    *   [7]~[0] should always be 0b11101011
-    *
-    *   [15]        : SS, 0 = no effect, 1 = start work, default 0b0
-    *   [14]~[12]   : MUX[2:0], default 0b000
-    *   [11]~[9]    : PGA[2:0], default 0b010 = FSR is ±2.048
-    *   [8]         : mode, 0 = continuous, 1 = one shot, default 0b1 (Power-down and single-shot mode )
-    *
-    *   [7]~[5]     : data rate, default 0b100 = 128 SPS
-    *   [4]         : Temperature? default 0b0 = ADC mode
-    *   [3]         : Pullup enable, default 0b1 = Pullup resistor enabled
-    *   [2]~[1]     : NOP, default 0b01
-    *   [0]         : reserved, default 0b1
-    *
-    */
-    uint8_t *rx = rxbuf;
-    uint8_t *tx = txbuf;
-
-//    tx[0] = 0b00000101;
-    for (int i=0; i<SPI_ADC_SIZE; i++) {
-        tx[i] = 0;
-        rx[i] = 0;
-
-    }
-
-    tx[0] = ADCin;
-    tx[1] = 0b11101011;
-
-    ADC_SPI(2, tx, rx);
-
-    return;
-}
-
-static void __ADC_read(uint8_t *rxbuf, uint8_t *txbuf)
-{
-    /*
-     *  read SPI to get ADC value
-     */
-    uint8_t *rx = rxbuf;
-    uint8_t *tx = txbuf;
-
-    for (int i=0; i<SPI_ADC_SIZE; i++) {
-        tx[i] = 0;
-        rx[i] = 0;
-
-    }
-
-    ADC_SPI(2, tx, rx);
-
-    return;
-}
-
-static void __ADC_ch_sel(uint8_t AdcChannel, uint8_t *rxbuf, uint8_t *txbuf)
-{
-    /*
-     *  choise ADC channel to write
-     *
-     *  set ADC parameter
-     *  0xC1~F1 = reading AIN0~AIN3. Using FSR+-6V, resolution = 187.5uV
-     *  0xC5~F5 = reading AIN0~AIN3. Using FSR+-2V, resolution = 62.5 uV
-     *
-     *  ADCChannel == ADC_CH_CURR: - AINp is AIN0; AINn is GND
-     *                             - measure AIN0, which is a current measure
-     *             == ADC_CH_VIN:  - AINp is AIN1; AINn is GND
-     *                             - AIN1, which is a volt measure
-     *             == ADC_CH_VOUT: - AINp is AIN2; AINn is GND
-     *                             - AIN2, measure DAC voltage (Note that this is NOT DAC real output value!!)
-     *             == ADC_CH_BAT:  - measure battery volt
-     *
-     */
-
-    uint8_t ch = AdcChannel;
-    uint8_t *rx = rxbuf;
-    uint8_t *tx = txbuf;
-
-    switch (ch) {
-        case ADC_CH_CURR:
-            __ADC_write(CMD_CURRENT_MEASURE, rx, tx);
-            break;
-
-        case ADC_CH_VIN:
-            __ADC_write(CMD_VOLT_MEASURE, rx, tx);
-            break;
-
-
-        case ADC_CH_VOUT:
-            __ADC_write(CMD_DAC_MEASURE, rx, tx);
-            break;
-
-        case ADC_CH_BAT:
-            __ADC_write(CMD_BATTERY_MEASURE, rx, tx);
-            break;
-
-        default:
-            break;
-    }
-
-    return;
-}
-
-static void __read_ADC_value(uint8_t AdcChannel, uint8_t *rxbuf, uint8_t *txbuf)
-{
-    uint8_t ch = AdcChannel;
-    uint8_t *rx = rxbuf;
-    uint8_t *tx = txbuf;
-
-    // Read data twice since the first data we get is previous data
-    __ADC_ch_sel(ch, rx, tx);
-    __ADC_read(rx, tx);
-
-    __ADC_ch_sel(ch, rx, tx);
-    __ADC_read(rx, tx);
-
-    return;
-}
-
-static void __reset_i_gain_cnt(int16_t *I_100R_cnt, int16_t *I_3K_cnt, int16_t *I_100K_cnt, int16_t *I_3M_cnt)
-{
-    *I_3M_cnt   = 0;
-    *I_100K_cnt = 0;
-    *I_3K_cnt   = 0;
-    *I_100R_cnt = 0;
-
-    return;
-}
-
-static void __switch_lv0(uint8_t gain0_en, uint16_t plot, int16_t *I_GAIN_3M_counter, uint16_t *no_rec_cnt)
-{
-    int16_t  *gain_cnt = I_GAIN_3M_counter;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain0_en;
-    uint16_t  pt = plot;
-
-    if (gain_en) {
-        *gain_cnt += 1;
-
-        if (*gain_cnt > 2) {
-            instru.IinADCGainLv = I_GAIN_3M;
-            IinADCGainCtrl(instru.IinADCGainLv);
-            *gain_cnt = 0;
-
-            if (pt == IIN_VIN_VOUT_PLOT) {
-                *no_rec = CNT_H2L_IIN_VIN_VOUT_PLOT;
-
-            } else if (pt == IIN_VIN_PLOT) {
-                *no_rec = CNT_H2L_IIN_VIN_PLOT;
-
-            } else if (pt == IT_PLOT) {
-                *no_rec = CNT_H2L_IT_PLOT;
-
-            }
-        }
-    }
-
-    return;
-}
-
-static void __switch_lv3(uint8_t gain3_en, uint16_t plot, int16_t *I_GAIN_100R_counter, uint16_t *no_rec_cnt)
-{
-    int16_t  *gain_cnt = I_GAIN_100R_counter;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain3_en;
-
-    if (gain_en) {
-        *gain_cnt += 1;
-
-        if (*gain_cnt > 2) {
-            instru.IinADCGainLv = I_GAIN_100R;
-            IinADCGainCtrl(instru.IinADCGainLv);
-            *gain_cnt = 0;
-            *no_rec = 0;
-
-        }
-    }
-
-    return;
-}
-
-static void __large_switch_lv1(uint8_t gain1_en, uint16_t plot, int16_t *I_GAIN_100K_counter, uint16_t *no_rec_cnt)
-{
-    int16_t  *gain_cnt = I_GAIN_100K_counter;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain1_en;
-    uint16_t  pt = plot;
-
-    if (gain_en) {
-        *gain_cnt += 1;
-
-        if (*gain_cnt > 2) {
-            instru.IinADCGainLv = I_GAIN_100K;
-            IinADCGainCtrl(instru.IinADCGainLv);
-            *gain_cnt = 0;
-            *no_rec = 0;
-
-            if (pt == IIN_VIN_VOUT_PLOT) {
-                *no_rec = CNT_H2L_IIN_VIN_VOUT_PLOT;
-
-            } else if (pt == IIN_VIN_PLOT) {
-                *no_rec = CNT_H2L_IIN_VIN_PLOT;
-
-            } else if (pt == IT_PLOT) {
-                *no_rec = CNT_H2L_IT_PLOT;
-
-            }
-
-        }
-    }
-
-    return;
-}
-
-static void __small_switch_lv1(uint8_t gain1_en, uint16_t plot, int16_t *I_GAIN_100K_counter, uint16_t *no_rec_cnt)
-{
-    int16_t  *gain_cnt = I_GAIN_100K_counter;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain1_en;
-    uint16_t  pt = plot;
-
-    if (gain_en) {
-        *gain_cnt += 1;
-
-        if (*gain_cnt > 2) {
-            instru.IinADCGainLv = I_GAIN_100K;
-            IinADCGainCtrl(instru.IinADCGainLv);
-            *gain_cnt = 0;
-
-            if (pt == IIN_VIN_VOUT_PLOT) {
-                *no_rec = CNT_L2H_IIN_VIN_VOUT_PLOT;
-
-            } else if (pt == IIN_VIN_PLOT) {
-                *no_rec = CNT_L2H_IIN_VIN_PLOT;
-
-            } else if (pt == IT_PLOT) {
-                *no_rec = CNT_L2H_IT_PLOT;
-
-            }
-        }
-    }
-
-    return;
-}
-
-static void __large_switch_lv2(uint8_t gain2_en, uint16_t plot, int16_t *I_GAIN_3K_counter, uint16_t *no_rec_cnt)
-{
-    int16_t  *gain_cnt = I_GAIN_3K_counter;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain2_en;
-    uint16_t  pt = plot;
-
-    if (gain_en) {
-        *gain_cnt += 1;
-
-        if (*gain_cnt > 2) {
-            instru.IinADCGainLv = I_GAIN_3K;
-            IinADCGainCtrl(instru.IinADCGainLv);
-            *gain_cnt = 0;
-            *no_rec = 0;
-
-            if (pt == IIN_VIN_VOUT_PLOT) {
-                *no_rec = CNT_H2L_IIN_VIN_VOUT_PLOT;
-
-            } else if (pt == IIN_VIN_PLOT) {
-                *no_rec = CNT_H2L_IIN_VIN_PLOT;
-
-            } else if (pt == IT_PLOT) {
-                *no_rec = CNT_H2L_IT_PLOT;
-
-            }
-        }
-    }
-
-    return;
-}
-
-static void __small_switch_lv2(uint8_t gain2_en, uint16_t plot, int16_t *I_GAIN_3K_counter, uint16_t *no_rec_cnt)
-{
-    int16_t  *gain_cnt = I_GAIN_3K_counter;
-    uint16_t *no_rec = no_rec_cnt;
-    uint8_t   gain_en = gain2_en;
-
-    if (gain_en) {
-        *gain_cnt += 1;
-
-        if (*gain_cnt > 2) {
-            instru.IinADCGainLv = I_GAIN_3K;
-            IinADCGainCtrl(instru.IinADCGainLv);
-            *gain_cnt = 0;
-            *no_rec = 0;
-
-        }
-    }
-
-    return;
-}
-
-void IinADCGainCtrl(uint8_t IinADCLevel)
-{
-    /* hardware need open before close, so don't change position*/
-    if (IinADCLevel == 0) {
-        // ADC gain level = 0, using 3M resister
-        PIN15_setOutputValue(Turnon_I_LARGE, 0);
-        PIN15_setOutputValue(Turnon_I_MID, 0);
-        PIN15_setOutputValue(Turnon_I_SMALL, 0);
-
-    } else if (IinADCLevel == 1) {
-        // ADC gain level = 1, using 100K resister
-        PIN15_setOutputValue(Turnon_I_SMALL, 1); /* need open first */
-        PIN15_setOutputValue(Turnon_I_LARGE, 0);
-        PIN15_setOutputValue(Turnon_I_MID, 0);
-
-    } else if (IinADCLevel == 2) {
-        // ADC gain level = 2, using 3K resister
-        PIN15_setOutputValue(Turnon_I_MID, 1); /* need open first */
-        PIN15_setOutputValue(Turnon_I_LARGE, 0);
-        PIN15_setOutputValue(Turnon_I_SMALL, 0);
-
-    } else if (IinADCLevel == 3) {
-        // ADC gain level = 3, using 100R resistor
-        PIN15_setOutputValue(Turnon_I_LARGE, 1); /* need open first */
-        PIN15_setOutputValue(Turnon_I_MID, 0);
-        PIN15_setOutputValue(Turnon_I_SMALL, 0);
-
-    } else if (IinADCLevel == 4) {
-        // ADC gain level = 3, auto gain (using 100R resister)
-        PIN15_setOutputValue(Turnon_I_LARGE, 1); /* need open first */
-        PIN15_setOutputValue(Turnon_I_MID, 0);
-        PIN15_setOutputValue(Turnon_I_SMALL, 0);
-
-    } else {
-        // default using 100R resister
-        PIN15_setOutputValue(Turnon_I_LARGE, 1);  /* need open first */
-        PIN15_setOutputValue(Turnon_I_MID, 0);
-        PIN15_setOutputValue(Turnon_I_SMALL, 0);
-
-    }
-
-    if (IinADCLevel == 0 || IinADCLevel == 1 || IinADCLevel == 2 || IinADCLevel == 3) {
-        lastIinADCGainLevel = IinADCLevel;
-
-    } else {
-        lastIinADCGainLevel = 3;
-
-    }
-
-    curr_rec_en = false;
-
-    return;
-}
-
-void VinADCGainCtrl(uint8_t VinADCLevel)
-{
-    /* hardware need open before close, so don't change position*/
-    if (VinADCLevel == 0) {
-        // Vin ADC gain level = 0, using 1M resister
-        PIN15_setOutputValue(Turnon_V_SMALL, 0);
-        PIN15_setOutputValue(Turnon_V_MID, 0);
-
-    } else if (VinADCLevel == 1) {
-        // Vin ADC gain level = 1, using 30K resister
-        PIN15_setOutputValue(Turnon_V_MID, 1); /* need open first */
-        PIN15_setOutputValue(Turnon_V_SMALL, 0);
-
-    } else if (VinADCLevel == 2) {
-        // Vin ADC gain level = 2, using 1K resister
-        PIN15_setOutputValue(Turnon_V_SMALL, 1); /* need open first */
-        PIN15_setOutputValue(Turnon_V_MID, 0);
-
-    } else if (VinADCLevel == 3) {
-        // Vin ADC gain level = 3, auto gain (using 1K resister)
-        PIN15_setOutputValue(Turnon_V_SMALL, 1); /* need open first */
-        PIN15_setOutputValue(Turnon_V_MID, 0);
-
-    } else {
-        // default using 1K resister
-        PIN15_setOutputValue(Turnon_V_SMALL, 1); /* need open first */
-        PIN15_setOutputValue(Turnon_V_MID, 0);
-
-    }
-
-    if (VinADCLevel == 0 || VinADCLevel == 1 || VinADCLevel == 2) {
-        lastVinADCGainLv = VinADCLevel;
-    } else {
-        lastVinADCGainLv = 2;
-    }
-
-    volt_rec_en = false;
-
-    return;
-}
-
-void read_adc_raw_data(uint8_t AdcChannel, uint8_t *rxbuf, uint8_t *txbuf)
-{
-    uint8_t ch = AdcChannel;
-    uint8_t *rx = rxbuf;
-    uint8_t *tx = txbuf;
-
-    if (ch == RIS_ADC_IIN) {
-        __read_ADC_value(ADC_CH_CURR, rx, tx);
-
-        return;
-    }
-
-    if (ch == RIS_ADC_VIN) {
-        __read_ADC_value(ADC_CH_VIN, rx, tx);
-
-        return;
-    }
-
-    if (ch == RIS_ADC_VOUT) {
-        __read_ADC_value(ADC_CH_VOUT, rx, tx);
-
-        return;
-    }
-
-    if (ch == RIS_ADC_BAT) {
-        __read_ADC_value(ADC_CH_BAT, rx, tx);
-
-        return;
-    }
-
-    return;
-}
-
-void AutoGainChangeIin(int32_t RealCurrent, uint16_t plot_type, uint16_t *no_rec_time)
-{
-    /*
-     * instru.IinADCGainLv == I_GAIN_100R: 3 level current(large)
-     *                     == I_GAIN_3K:   2 level current
-     *                     == I_GAIN_100K: 1 level current
-     *                     == I_GAIN_3M:   0 level current(small)
-     * no_rec_time: skip hardware damping
-     */
-
-    int32_t  curr = RealCurrent;
-    uint16_t plot = plot_type;
-    uint16_t *skip_time = no_rec_time;
-
-    static int16_t  I_100R_cnt = 0;
-    static int16_t  I_3K_cnt   = 0;
-    static int16_t  I_100K_cnt = 0;
-    static int16_t  I_3M_cnt   = 0;
-
-    int64_t small_gain = I_GAIN_SMALL_BOUNDARY;
-    int64_t mid1_gain1 = I_GAIN_MID1_BOUNDARY1;
-    int64_t mid1_gain2 = I_GAIN_MID1_BOUNDARY2;
-    int64_t mid2_gain1 = I_GAIN_MID2_BOUNDARY1;
-    int64_t mid2_gain2 = I_GAIN_MID2_BOUNDARY2;
-    int64_t large_gain = I_GAIN_LARGE_BOUNDARY;
-
-    uint8_t gain0_en = (instru.gain_switch_on & 0b10000000) >> 7;
-    uint8_t gain1_en = (instru.gain_switch_on & 0b01000000) >> 6;
-    uint8_t gain2_en = (instru.gain_switch_on & 0b00100000) >> 5;
-    uint8_t gain3_en = (instru.gain_switch_on & 0b00010000) >> 4;
-
-    if (instru.IinADCGainLv == I_GAIN_100R) {
-        if (curr < large_gain && curr > -1 * large_gain) {
-            if (curr < mid1_gain1 && curr > -1 * mid1_gain1) {
-                __switch_lv0(gain0_en, plot, &I_3M_cnt, skip_time);
-
-            } else if (curr < mid2_gain1 && curr > -1 * mid2_gain1) {
-                __large_switch_lv1(gain1_en, plot, &I_100K_cnt, skip_time);
-
-            } else {
-                __large_switch_lv2(gain2_en, plot, &I_3K_cnt, skip_time);
-
-            }
-        } else {
-            __reset_i_gain_cnt(&I_100R_cnt, &I_3K_cnt, &I_100K_cnt, &I_3M_cnt);
-
-        }
-
-        return;
-    }
-
-    if (instru.IinADCGainLv == I_GAIN_3K) {
-        if (curr > mid2_gain2 || curr < -1 * mid2_gain2) {
-            __switch_lv3(gain3_en, plot, &I_100R_cnt, skip_time);
-
-        } else if (curr < mid2_gain1 && curr > -1 * mid2_gain1) {
-            if (curr < mid1_gain1 && curr > -1 * mid1_gain1) {
-                __switch_lv0(gain0_en, plot, &I_3M_cnt, skip_time);
-
-            } else {
-                __large_switch_lv1(gain1_en, plot, &I_100K_cnt, skip_time);
-
-            }
-        } else {
-            __reset_i_gain_cnt(&I_100R_cnt, &I_3K_cnt, &I_100K_cnt, &I_3M_cnt);
-
-        }
-
-        return;
-    }
-
-    if (instru.IinADCGainLv == I_GAIN_100K) {
-        if (curr < mid1_gain1 && curr > -1 * mid1_gain1) {
-            __switch_lv0(gain0_en, plot, &I_3M_cnt, skip_time);
-
-        } else if (curr > mid1_gain2 || curr < -1 * mid1_gain2) {
-            if (curr > mid2_gain2 || curr < -1 * mid2_gain2) {
-                __switch_lv3(gain3_en, plot, &I_100R_cnt, skip_time);
-
-            } else {
-                __small_switch_lv2(gain2_en, plot, &I_3K_cnt, skip_time);
-
-            }
-        } else {
-            __reset_i_gain_cnt(&I_100R_cnt, &I_3K_cnt, &I_100K_cnt, &I_3M_cnt);
-
-        }
-
-        return;
-    }
-
-    if (instru.IinADCGainLv == I_GAIN_3M) {
-        if (curr > small_gain || curr < -1 * small_gain) {
-            if (curr > mid2_gain2 || curr < -1 * mid2_gain2) {
-                __switch_lv3(gain3_en, plot, &I_100R_cnt, skip_time);
-
-            } else if (curr > mid1_gain2 || curr < -1 * mid1_gain2) {
-                __small_switch_lv2(gain2_en, plot, &I_3K_cnt, skip_time);
-
-            } else {
-                __small_switch_lv1(gain1_en, plot, &I_100K_cnt, skip_time);
-
-            }
-        } else {
-            __reset_i_gain_cnt(&I_100R_cnt, &I_3K_cnt, &I_100K_cnt, &I_3M_cnt);
-
-        }
-
-        return;
-    }
-
-    return;
-}
-
-void AutoGainChangeVin(int32_t RealVin)
-{
-    /*
-     * instru.IinADCGainLv == VIN_GAIN_1K:   2 level volt(large)
-     *                     == VIN_GAIN_30K:  1 level volt
-     *                     == VIN_GAIN_1M:   0 level volt(small)
-     *
-     */
-
-    static int16_t  VIN_GAIN_1M_counter = 0;
-    static int16_t  VIN_GAIN_30K_counter = 0;
-    static int16_t  VIN_GAIN_1K_counter = 0;
-
-    if(instru.VinADCGainLv == VIN_GAIN_1M){
-        if(RealVin > VIN_GAIN_SMALL_BOUNDARY || RealVin < -1*VIN_GAIN_SMALL_BOUNDARY){
-            // switch to 2 level volt(large)
-            if (RealVin > VIN_GAIN_MID1_BOUNDARY2 || RealVin < -1*VIN_GAIN_MID1_BOUNDARY2){
-                VIN_GAIN_1K_counter++;
-                if(VIN_GAIN_1K_counter > 2){
-                    instru.VinADCGainLv = VIN_GAIN_1K;
-                    VinADCGainCtrl(instru.VinADCGainLv);
-                    VIN_GAIN_1K_counter = 0;
-                }
-            }
-            // switch to 1 level volt
-            else{
-                VIN_GAIN_30K_counter++;
-                if(VIN_GAIN_30K_counter > 2){
-                    instru.VinADCGainLv = VIN_GAIN_30K;
-                    VinADCGainCtrl(instru.VinADCGainLv);
-                    VIN_GAIN_30K_counter = 0;
-                }
-            }
-        }else{
-            VIN_GAIN_1M_counter = 0;
-            VIN_GAIN_30K_counter = 0;
-            VIN_GAIN_1K_counter = 0;
-        }
-    }
-    else if(instru.VinADCGainLv == VIN_GAIN_30K){
-        // switch to 0 level volt(small)
-        if(RealVin < VIN_GAIN_MID1_BOUNDARY1 && RealVin > -1*VIN_GAIN_MID1_BOUNDARY1){
-            VIN_GAIN_1M_counter++;
-            if(VIN_GAIN_1M_counter > 2){
-                instru.VinADCGainLv = VIN_GAIN_1M;
-                VinADCGainCtrl(instru.VinADCGainLv);
-                VIN_GAIN_1M_counter = 0;
-            }
-        }
-        else if (RealVin > VIN_GAIN_MID1_BOUNDARY2 || RealVin < -1*VIN_GAIN_MID1_BOUNDARY2){
-            // switch to 2 level volt
-            VIN_GAIN_1K_counter++;
-            if(VIN_GAIN_1K_counter > 2){
-                instru.VinADCGainLv = VIN_GAIN_1K;
-                VinADCGainCtrl(instru.VinADCGainLv);
-                VIN_GAIN_1K_counter = 0;
-            }
-        }else{
-            VIN_GAIN_1M_counter = 0;
-            VIN_GAIN_30K_counter = 0;
-            VIN_GAIN_1K_counter = 0;
-        }
-    }
-    else if(instru.VinADCGainLv == VIN_GAIN_1K){
-        if(RealVin < VIN_GAIN_LARGE_BOUNDARY && RealVin > -1*VIN_GAIN_LARGE_BOUNDARY){
-            // switch to 0 level volt(small)
-            if (RealVin < VIN_GAIN_MID1_BOUNDARY1 && RealVin > -1*VIN_GAIN_MID1_BOUNDARY1){
-                VIN_GAIN_1M_counter++;
-                if(VIN_GAIN_1M_counter > 2){
-                    instru.VinADCGainLv = VIN_GAIN_1M;
-                    VinADCGainCtrl(instru.VinADCGainLv);
-                    VIN_GAIN_1M_counter = 0;
-                }
-            }
-            // switch to 1 level volt
-            else{
-                VIN_GAIN_30K_counter++;
-                if(VIN_GAIN_30K_counter > 2){
-                    instru.VinADCGainLv = VIN_GAIN_30K;
-                    VinADCGainCtrl(instru.VinADCGainLv);
-                    VIN_GAIN_30K_counter = 0;
-                }
-            }
-        }else{
-            VIN_GAIN_1M_counter = 0;
-            VIN_GAIN_30K_counter = 0;
-            VIN_GAIN_1K_counter = 0;
-        }
-    }
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteDAC.h

@@ -1,94 +0,0 @@
-
-#ifndef EliteDAC
-#define EliteDAC
-
-static bool DACReset;
-
-#ifdef ELITE_VERSION_1_4
-#define DACCLS 0x02
-#define DACOUT 0x31
-
-static uint16_t DAC_outputV(uint16_t voltLV) {
-    // C = command, X = don't care, D = data
-    // CCCC CCCC = command
-    // DDDD DDDD = v1
-    // DDDD DDDD = v2
-
-    // command
-    // 0x02 = clear
-    // 0x31 = output voltage
-
-    uint8_t v1, v2 = 0;
-    v1 = (uint8_t) ((voltLV & 0xFF00) >> 8);
-    v2 = (uint8_t) (voltLV & 0x00FF);
-
-    spi_DACtxbuf[0] = DACOUT;
-    spi_DACtxbuf[1] = v1;
-    spi_DACtxbuf[2] = v2;
-
-    DAC_SPI(SPI_DAC_SIZE, spi_DACtxbuf, spi_rxbuf);
-
-    return voltLV;
-}
-
-static void VoutGainControl(uint8_t VOUTLevel){
-    if(VOUTLevel == 0){
-        // VOUT gain level = 0, using 240K resister
-        PIN15_setOutputValue(Turnon_VOUT_SMALL, 0);
-    }
-    else if(VOUTLevel == 1){
-        // VOUT gain level = 1, using 15K resister
-        PIN15_setOutputValue(Turnon_VOUT_SMALL, 1);
-    }
-    else if(VOUTLevel == 2){
-        // VOUT gain level = 2, using 15K resister
-        PIN15_setOutputValue(Turnon_VOUT_SMALL, 1);
-    }
-    else{
-        // default using 15K resister
-        PIN15_setOutputValue(Turnon_VOUT_SMALL, 1);
-    }
-    volt_rec_en = false;
-}
-
-#endif
-
-static int32_t User2Real(uint16_t UserCode){
-    /* transfer usercode to real voltage value (mV) */
-    return (int32_t)((UserCode - 25000) / 5);
-}
-
-
-// DAC Vout theoretical boundary <300, 100~ (mV)
-#define DAC_VOUT_GAIN_SMALL_BOUNDARY           100000  // 25500(usercode) = 100 mV
-#define DAC_VOUT_GAIN_LARGE_BOUNDARY           300000  // 26500(usercode) = 300 mV
-#define DAC_VOUT_GAIN_LARGE_BOUNDARY_USERCODE   26500  // 26500(usercode) = 300 mV
-#define DAC_VOUT_GAIN_LARGE_BOUNDARY1_USERCODE  23500  // 23500(usercode) = -300 mV
-
-static void AutoGainChangeVout(int32_t userCode){
-    int32_t RealVolt = (userCode - 25000) * 200; // (userCode - 25000) / 5 * 1000  [1uV]
-    // switch to 1 level volt(small)   15K
-    // switch to 2 level volt(large)   240K
-
-    if(instru.VoutGainLv == VOUT_GAIN_AUTO){
-        instru.VoutGainLv = VOUT_GAIN_15K;
-        VoutGainControl(instru.VoutGainLv);
-    }
-
-    if(instru.VoutGainLv == VOUT_GAIN_15K){
-        if(RealVolt > DAC_VOUT_GAIN_LARGE_BOUNDARY || RealVolt < -1 * DAC_VOUT_GAIN_LARGE_BOUNDARY){
-            // switch to 2 level volt(large)
-            instru.VoutGainLv = VOUT_GAIN_240K;
-            VoutGainControl(instru.VoutGainLv);
-        }
-    }
-    else if(instru.VoutGainLv == VOUT_GAIN_240K){
-        if(RealVolt < DAC_VOUT_GAIN_SMALL_BOUNDARY && RealVolt > -1 * DAC_VOUT_GAIN_SMALL_BOUNDARY ){
-            // switch to 1 level volt(small)
-            instru.VoutGainLv = VOUT_GAIN_15K;
-            VoutGainControl(instru.VoutGainLv);
-        }
-    }
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteFlagCTInit.h

@@ -1,32 +0,0 @@
-
-#ifndef ELITE_FLAG_CT_INIT
-#define ELITE_FLAG_CT_INIT
-
-// GPT counter
-struct _GPT{
-    uint32_t GptimerCounter;
-    uint32_t GptimerCounter0;
-    uint8_t  DeltaGptimerCounter;
-    uint32_t SampleRateCounter;
-    uint32_t NotifyCounter;
-    uint32_t VscanRateCounter;
-    uint32_t LeadTimeCounter;
-    uint32_t BatteryADCCounter;
-    uint32_t BatteryCheckCounter;
-    uint32_t GptimerMultiple;
-    uint32_t StiCounter;
-}GPT = {0};
-
-static void InitGPT(){
-    GPT.GptimerCounter      = 0;
-    GPT.GptimerCounter0     = 0;
-    GPT.DeltaGptimerCounter = 0;
-    GPT.SampleRateCounter   = 0;
-    GPT.NotifyCounter       = 0;
-    GPT.VscanRateCounter    = 0;
-    GPT.LeadTimeCounter     = 0;
-    GPT.BatteryADCCounter   = 0;
-    GPT.BatteryCheckCounter = 0;
-    GPT.StiCounter          = 0;
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteGPTimer.h

@@ -1,38 +0,0 @@
-/* Copyright (c) 2019. BioPro. Scientific.
- */
-#ifndef HEADSTAGE_GPTIMER_H
-#define HEADSTAGE_GPTIMER_H
-
-#include <Board.h>
-#include <ti/drivers/timer/GPTimerCC26XX.h>
-#include <ti/sysbios/BIOS.h>
-#include <xdc/runtime/Types.h>
-
-#define EVT_PERIODIC_GPTIMER EVT_PERIODIC_0
-
-static GPTimerCC26XX_Handle gptimer_handle;
-
-static void elite_gptimer_callback(GPTimerCC26XX_Handle handle, GPTimerCC26XX_IntMask interruptMask);
-
-#define elite_gptimer_start() GPTimerCC26XX_start(gptimer_handle)
-#define elite_gptimer_stop() GPTimerCC26XX_stop(gptimer_handle)
-#define elite_gptimer_close() GPTimerCC26XX_close(gptimer_handle)
-#define CLOCK_FREQ 4769  // clock freq = 0.1 ms(4800), Measured(4769)
-
-#define elite_gptimer_open()                                                                          \
-    do {                                                                                              \
-        GPTimerCC26XX_Params params;                                                                  \
-        GPTimerCC26XX_Params_init(&params);                                                           \
-        params.width          = GPT_CONFIG_16BIT;                                                     \
-        params.mode           = GPT_MODE_PERIODIC_DOWN;                                               \
-        params.debugStallMode = GPTimerCC26XX_DEBUG_STALL_OFF;                                        \
-        gptimer_handle        = GPTimerCC26XX_open(Board_GPTIMER0A, &params);                         \
-        Types_FreqHz  freq;                                                                           \
-        BIOS_getCpuFreq(&freq);                                                                       \
-        GPTimerCC26XX_Value loadVal = freq.lo / 1000 - 1; /*47999*/                                   \
-        GPTimerCC26XX_setLoadValue(gptimer_handle, loadVal);                                          \
-        GPTimerCC26XX_setLoadValue(gptimer_handle, CLOCK_FREQ); /* 0.1 ms*/                           \
-        GPTimerCC26XX_registerInterrupt(gptimer_handle, elite_gptimer_callback, GPT_INT_TIMEOUT);     \
-    } while (0)
-
-#endif  // HEADSTAGE_GPTIMER_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteI2C.h

@@ -1,95 +0,0 @@
-
-#ifndef ELITE_I2C
-#define ELITE_I2C
-
-/*
-* Read I2C example in
-* http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/tirtos/2_14_02_22/
-*        exports/tirtos_full_2_14_02_22/docs/doxygen/html/_i2_c_c_c26_x_x_8h.html
-*
-*/
-
-#include <ti/drivers/I2C.h>
-#include <ti/drivers/Power.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <stddef.h>
-
-// I2C
-static I2C_Handle I2Chandle;
-static I2C_Params I2Cparams;
-static I2C_Transaction i2cTrans;
-
-#define I2CBufSize 4
-static uint8_t I2CtxBuf[I2CBufSize];      // Transmit buffer
-static uint8_t I2CrxBuf[I2CBufSize];      // Receive buffer
-bool transferDone = false;
-
-static void I2CCallbackFunction(I2C_Handle handle, I2C_Transaction *msg, bool transfer) {
-    if(transfer){
-        transferDone = true;
-    }
-}
-
-static void I2Cinit(){
-    I2C_init();
-
-    // Configure I2C parameters.
-    I2C_Params_init(&I2Cparams);
-
-    I2Cparams.transferMode  = I2C_MODE_CALLBACK;
-    I2Cparams.transferCallbackFxn = I2CCallbackFunction;
-    I2Cparams.bitRate  = I2C_100kHz;
-
-    // Initialize master I2C transaction structure
-    i2cTrans.writeCount   = I2CBufSize;
-    i2cTrans.writeBuf     = I2CtxBuf;
-    i2cTrans.readCount    = I2CBufSize;
-    i2cTrans.readBuf      = I2CrxBuf;
-    i2cTrans.slaveAddress = 0xA0;
-
-    for(int i=0 ; i<10 ; i++){
-        I2CtxBuf[i] = 0;
-        I2CrxBuf[i] = 0;
-    }
-
-    // Open I2C
-    I2Chandle = I2C_open(Board_I2C, &I2Cparams);
-
-}
-#define WriteMem 0b10100001
-#define ReadMem  0b10100000
-
-static void I2CWrite(uint8_t addr, uint8_t data){
-    for(int i=0 ; i<I2CBufSize ; i++){
-        I2CtxBuf[i] = 0;
-        I2CrxBuf[i] = 0;
-    }
-
-    I2CtxBuf[0] = WriteMem;
-    I2CtxBuf[1] = addr;
-    I2CtxBuf[2] = data;
-
-//    I2Chandle = I2C_open(Board_I2C, &I2Cparams);
-    I2C_transfer(I2Chandle, &i2cTrans);
-//    I2C_close(I2Chandle);
-}
-
-
-static void I2CRead(uint8_t addr){
-    for(int i=0 ; i<I2CBufSize ; i++){
-        I2CtxBuf[i] = 0;
-        I2CrxBuf[i] = 0;
-    }
-
-    I2CtxBuf[0] = ReadMem;
-    I2CtxBuf[1] = addr;
-
-//    I2Chandle = I2C_open(Board_I2C, &I2Cparams);
-    I2C_transfer(I2Chandle, &i2cTrans);
-//    I2C_close(I2Chandle);
-}
-
-
-#endif  // ELITE_I2C
-

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteInstruction.h

@@ -1,240 +0,0 @@
-/*=============================================================================
- =                          instr.h                                              =
- =============================================================================*/
-#ifndef ELITE_INSTR_H
-#define ELITE_INSTR_H
-
-#ifdef __cpulsplus
-extern "C" {
-#endif
-
-/*==============================
- ==== headstage instruction ====
- =============================*/
-struct HEADSTAGE_INSTRUCTION {
-    uint8_t  chip_id;
-    uint8_t  eliteFxn;
-
-    // time relation
-    uint8_t  VsetRateIndex;
-    uint32_t VsetRate;
-    uint32_t sampleRate;
-    uint32_t notifyRate;
-    uint32_t period;
-
-    int32_t  Vset;
-    uint16_t VoltConstant;
-    uint8_t  directionInit;
-    uint32_t step;
-    uint16_t Ve1;
-    uint16_t Ve2;
-    int32_t  Vinit;
-    int32_t  Vmax;
-    int32_t  Vmin;
-
-    uint32_t steptime;
-
-    uint8_t  IinADCAutoGainEn;
-    uint8_t  VinADCAutoGainEn;
-    uint8_t  VoutAutoGainEn;
-    uint8_t  IinADCGainLv;
-    uint8_t  VinADCGainLv;
-    uint16_t VoutGainLv;
-    uint8_t  gain_switch_on;
-    uint8_t  AdcChannel;
-    bool     hign_z_en;
-
-    uint16_t cycleNumber;
-    uint8_t  charge;
-    int32_t  constantCurrent;
-
-    // uni pulse mode
-    int32_t  v0;
-    uint32_t t_pulse[4];
-    int32_t  v_initial[4];
-    int32_t  v_slope[4];
-    int32_t  v_step[4];
-    uint32_t t_pulse_min[4];
-    uint32_t t_pulse_max[4];
-    int32_t  v_stop;
-    int32_t  v_up;
-    int32_t  v_low;
-    bool     v_invert_option;
-    bool     v_stop_direction;
-    int32_t  v_1;
-    int32_t  v_2;
-
-
-    // pulse mode
-    int32_t  sti_v1;
-    int32_t  sti_v2;
-    int32_t  sti_v3;
-    int32_t  sti_v4;
-    int32_t  sti_v5;
-    int32_t  sti_v6;
-    int32_t  sti_v7;
-    int32_t  sti_t1;
-    int32_t  sti_t2;
-    int32_t  sti_t3;
-    int32_t  sti_t4;
-    int32_t  sti_t5;
-    int32_t  sti_t6;
-    int32_t  sti_t7;
-    uint16_t sti_cy;
-    uint16_t sti_loop;
-
-    int32_t Vout;
-
-    // not use
-    int32_t  Currentmax;
-    uint8_t  VoViSwitch;
-
-
-
-
-
-} instru = {0};
-
-/** Iin, Vin, Vout **/
-#define RIS_ADC_IIN         0x00
-#define RIS_ADC_VIN         0x01
-#define RIS_DAC_VOUT        0x02
-#define RIS_HIGH_Z          0x03
-#define RIS_ADC_VOUT        0x04
-#define RIS_ADC_BAT         0x05
-
-// ADC Iin gain level !!! move to ADC.h in future
-#define I_GAIN_3M       0x00    // lv0,largest gain
-#define I_GAIN_100K     0x01    // lv1
-#define I_GAIN_3K       0x02    // lv2
-#define I_GAIN_100R     0x03    // lv3,the least gain
-#define I_GAIN_AUTO     0x04
-
-// ADC Vin gain level !!! move to ADC.h in future
-#define VIN_GAIN_1M     0x00
-#define VIN_GAIN_30K    0x01
-#define VIN_GAIN_1K     0x02
-#define VIN_GAIN_AUTO   0x03
-
-// DAC Vout gain level !!! move to DAC.h in future
-#define VOUT_GAIN_240K  0x00
-#define VOUT_GAIN_15K   0x01
-#define VOUT_GAIN_AUTO  0x02
-
-/* DAC reset parameter */
-#define DAC_ZERO    25000 // DAC_ZERO is about 0V
-
-// Step time macro
-#define STEPTIME_HALF_SEC 5000
-#define STEPTIME_ONE_SEC 10000
-#define STEPTIME_TWO_SEC 20000
-
-/*********************************************************************
- * @fn      InitEliteInstruction
- *
- * @brief   Init all INSTRUCTION variable.
- *
- * @param   None.
- *
- * @return  None.
- */
-static void InitEliteInstruction(void)
-{
-    instru.chip_id         = 0;
-    instru.eliteFxn        = 0;         //default is a null event
-
-    instru.VsetRateIndex   = 0;         // vscan rate
-    instru.VsetRate        = 2;
-    instru.sampleRate      = 20;        // ADC's sample rate
-    instru.notifyRate      = CLOCK_ONE_SECOND;   // send data's rate
-    instru.period          = CLOCK_ONE_SECOND;
-
-    instru.Vset            = 0;         // vscan's volt[5nv]
-    instru.VoltConstant    = DAC_ZERO;  // DAC's volt[UC]
-    instru.directionInit   = 1;         // 0:reverse, 1:forward
-    instru.step            = 0;
-    instru.Ve1             = DAC_ZERO;  // user set volt[UC]
-    instru.Ve2             = DAC_ZERO;  // user set volt[UC]
-    instru.Vinit           = 0;         // user set init volt[5nv]
-    instru.Vmax            = 0;         // user set max volt[5nv]
-    instru.Vmin            = 0;         // user set min voit[5nv]
-
-    instru.IinADCAutoGainEn = 1;
-    instru.VinADCAutoGainEn = 1;
-    instru.VoutAutoGainEn   = 1;
-    instru.IinADCGainLv     = I_GAIN_AUTO;
-    instru.VinADCGainLv     = VIN_GAIN_AUTO;
-    instru.VoutGainLv       = VOUT_GAIN_AUTO;
-    instru.gain_switch_on   = 0b11110000;   // cur auto gain switch, |lv0|lv1|lv2|lv3|none|none|none|none|
-    instru.AdcChannel       = 0;         // RIS_ADC_IIN: 0x00, RIS_ADC_VIN: 0x01, RIS_DAC_VOUT: 0x02, RIS_HIGH_Z: 0x03
-    instru.hign_z_en        = 1;
-
-    instru.cycleNumber     = 1;
-    instru.charge          = 1;         // 0:discharge, 1:charge
-    instru.constantCurrent = 0;
-
-    // uni pulse mode
-    instru.v0              = DAC_ZERO;  // t < 0, volt is 0v
-    instru.v_stop          = 0;
-    instru.t_pulse[0]      = 0;
-    instru.t_pulse[1]      = 0;
-    instru.t_pulse[2]      = 0;
-    instru.t_pulse[3]      = 0;
-    instru.v_initial[0]    = 0;
-    instru.v_initial[1]    = 0;
-    instru.v_initial[2]    = 0;
-    instru.v_initial[3]    = 0;
-    instru.v_slope[0]      = 0;
-    instru.v_slope[1]      = 0;
-    instru.v_slope[2]      = 0;
-    instru.v_slope[3]      = 0;
-    instru.v_step[0]       = 0;
-    instru.v_step[1]       = 0;
-    instru.v_step[2]       = 0;
-    instru.v_step[3]       = 0;
-    instru.t_pulse_min[0]  = 0;
-    instru.t_pulse_min[1]  = 0;
-    instru.t_pulse_min[2]  = 0;
-    instru.t_pulse_min[3]  = 0;
-    instru.t_pulse_max[0]  = 0;
-    instru.t_pulse_max[1]  = 0;
-    instru.t_pulse_max[2]  = 0;
-    instru.t_pulse_max[3]  = 0;
-    instru.v_invert_option = false;
-    instru.v_stop_direction = true;
-    instru.v_1              = 0;
-    instru.v_2              = 0;
-
-    //pulse mode
-    instru.sti_t1          = 0;
-    instru.sti_t2          = 0;
-    instru.sti_t3          = 0;
-    instru.sti_t4          = 0;
-    instru.sti_t5          = 0;
-    instru.sti_t6          = 0;
-    instru.sti_t7          = 0;
-    instru.sti_v1          = DAC_ZERO;
-    instru.sti_v2          = DAC_ZERO;
-    instru.sti_v3          = DAC_ZERO;
-    instru.sti_v4          = DAC_ZERO;
-    instru.sti_v5          = DAC_ZERO;
-    instru.sti_v6          = DAC_ZERO;
-    instru.sti_v7          = DAC_ZERO;
-    instru.sti_loop        = 1;
-    instru.sti_cy          = 0;
-
-    instru.Vout            = 0;
-
-    // not use
-    instru.Currentmax      = 0;
-    instru.VoViSwitch      = 0x01;
-
-    return;
-}
-
-#ifdef __cpulsplus
-}
-#endif
-#endif
-
-

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteKeyDetect.h

@@ -1,74 +0,0 @@
-
-#ifndef ELITEKEYDETECT
-#define ELITEKEYDETECT
-
-static bool TurnOnElite(uint8_t key) {
-    static uint16_t TurnOnCounter = 0;
-
-    if (key == 0) {
-        // press 1 sec, power on LED, read bat power
-        if (TurnOnCounter >= CLOCK_ONE_SECOND) {
-            headstage_battery_volt();
-            uint16_t bat = NotifyVoltBat;
-            if( bat < 768 && bat > 20){
-                PIN15_setOutputValue(enable_5v, 0);
-                return false;
-            }else{
-                PIN15_setOutputValue(enable_5v, 1);  // enable 5V
-                TurnOn10V();
-                ModeLED(BT_WAIT);
-                return true;
-            }
-        } else {
-            TurnOnCounter++;
-            return false;
-        }
-    } else {
-        TurnOnCounter = 0;
-        PIN15_setOutputValue(enable_5v, 0);  // disable 5V
-        return false;
-    }
-}
-
-static void EliteKeyPress(uint8_t key) {
-    static uint16_t ShutDownCounter = 0;
-    static uint8_t OriginEliteFxn  = 0;
-
-    if (key == 0) {
-        // key = 0 if press
-        // press key => bight LED
-
-        if (ShutDownCounter == CLOCK_ONE_SECOND) {
-            KEYLED();
-        }
-
-        // press 3~4 sec, shutdown 2650
-        else if (ShutDownCounter > (CLOCK_ONE_SECOND*3) ) {
-            LED_color(DARKLED, 0xFF, 0xFF, 0x00);
-            PIN15_setOutputValue(enable_5v, 0);  // disable 5V
-        }
-        ShutDownCounter ++;
-    } else {
-        if (OriginEliteFxn == instru.eliteFxn) {  // old function == currunt instruction
-            if (ShutDownCounter != 0) {
-                // dark LED
-                checkFlafLED();
-                ShutDownCounter = 0;
-            }
-        } else {  // old function != currunt instruction
-            OriginEliteFxn = instru.eliteFxn;
-            if (ShutDownCounter != 0) {
-                ShutDownCounter = 0;
-            }
-            checkFlafLED();
-        }
-    }
-}
-
-static void TurnOn10V() {
-    If10Von = true;
-    PIN15_setOutputValue(enable_10v, 1);
-    CPUdelay(8000);
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteLED.h

@@ -1,201 +0,0 @@
-
-#ifndef ELITELED
-#define ELITELED
-
-#define DARKLED                  0xE1
-#define LIGHTLED                 0xE8
-
-static bool     btWaitLedFlag   = 0;
-static bool     noEventLedFlag  = 0;
-static bool     preWorkLedFlag  = 0;
-static bool     workingLedFlag  = 0;
-static bool     postWorkLedFlag = 0;
-
-static void WorkModeLED();
-
-static void LED_color(uint8_t bright, uint8_t red, uint8_t green, uint8_t blue) {
-    spi_LEDtxbuf[0] = 0x0000;
-    spi_LEDtxbuf[1] = 0x0000;
-    for (int i = 2; i < SPI_LED_SIZE - 2; i += 2) {
-        spi_LEDtxbuf[i]     = 0xE000 | ((uint16_t)bright << 8) | blue;
-        spi_LEDtxbuf[i + 1] = ((uint16_t)green << 8) | red;
-    }
-
-    spi_LEDtxbuf[SPI_LED_SIZE - 2] = 0xffff;
-    spi_LEDtxbuf[SPI_LED_SIZE - 1] = 0xffff;
-
-    LED_SPI(SPI_LED_SIZE, spi_LEDtxbuf, spi_LEDrxbuf);
-}
-
-static void Elite_led_color(uint16_t color){
-    switch (color) {
-        case COLOR_RED: {
-            LED_color(DARKLED, 0xFF, 0x00, 0x00);
-            break;
-        }
-        case COLOR_ORANGE: {
-            LED_color(DARKLED, 0xFF, 0x58, 0x09);
-            break;
-        }
-        case COLOR_YELLOW: {
-            LED_color(LIGHTLED, 0xFF, 0x80, 0x00);
-            break;
-        }
-        case COLOR_GREEN: {
-            LED_color(DARKLED, 0x00, 0xFA, 0x00);
-            break;
-        }
-        case COLOR_YELLOWGREEN: {
-            LED_color(DARKLED, 0x64, 0xA6, 0x00);
-            break;
-        }
-        case COLOR_BLUE: {
-            LED_color(DARKLED, 0x00, 0x00, 0xAA);
-            break;
-        }
-        case COLOR_CYAN: {
-            LED_color(DARKLED, 0x00, 0x40, 0x40);
-            break;
-        }
-        case COLOR_MAGENTA: {
-            LED_color(DARKLED, 0xFF, 0x00, 0x80);
-            break;
-        }
-        case COLOR_PURPLE: {
-            LED_color(DARKLED, 0xFF, 0x00, 0xFF);
-            break;
-        }
-        case COLOR_WHITE: {
-            LED_color(DARKLED, 0xCA, 0xFF, 0xFF);
-            break;
-        }
-        case COLOR_BLACK: {
-            LED_color(0x00, 0x00, 0x00, 0x00);
-            break;
-        }
-        //dark LED
-        case COLOR_YELLOW_DARK: {
-            LED_color(DARKLED, 0xFF, 0x80, 0x00);
-            break;
-        }
-        case COLOR_GREEN_DARK: {
-            LED_color(DARKLED, 0x00, 0x33, 0x00);
-            break;
-        }
-        case COLOR_BLUE_DARK: {
-            LED_color(DARKLED, 0x00, 0x00, 0x33);
-            break;
-        }
-        case COLOR_CYAN_DARK: {
-            LED_color(DARKLED, 0x00, 0x10, 0x10);
-            break;
-        }
-        case COLOR_PURPLE_DARK: {
-            LED_color(DARKLED, 0x55, 0x00, 0x55);
-            break;
-        }
-        default: {
-            break;
-        }
-    }
-}
-
-static void ModeLED(uint16_t modeStatus) {
-    btWaitLedFlag   = 0;
-    noEventLedFlag  = 0;
-    preWorkLedFlag  = 0;
-    workingLedFlag  = 0;
-    postWorkLedFlag = 0;
-
-    switch (modeStatus) {
-    case BT_WAIT: {
-        btWaitLedFlag = 1;
-        BT_WAIT_LED();
-        break;
-    }
-    case NO_EVENT: {
-        noEventLedFlag = 1;
-        LEDPowerON();
-        break;
-    }
-    case PRE_WORK: {
-        preWorkLedFlag = 1;
-        Elite_led_color(COLOR_BLUE);
-        break;
-    }
-    case WORKING: {
-        workingLedFlag = 1;
-        WorkModeLED();
-        break;
-    }
-    case POST_WORK: {
-        postWorkLedFlag = 1;
-        Elite_led_color(COLOR_BLUE);
-        break;
-    }
-    default: {
-        LEDPowerON();
-        break;
-    }
-    }
-}
-
-static void checkFlafLED()
-{
-    if(btWaitLedFlag == 1){
-        ModeLED(BT_WAIT);
-    }
-    else if(noEventLedFlag == 1){
-        ModeLED(NO_EVENT);
-    }
-    else if(preWorkLedFlag == 1){
-        ModeLED(PRE_WORK);
-    }
-    else if(workingLedFlag == 1){
-        ModeLED(WORKING);
-    }
-    else if(postWorkLedFlag == 1){
-        ModeLED(POST_WORK);
-    }
-}
-
-static void WorkModeLED()
-{
-    switch (instru.eliteFxn) {
-        case CURVE_IV:
-        case CURVE_VO:
-        case CURVE_RT:
-        case CURVE_VT:
-        case CURVE_IT:
-        case CURVE_CV:
-        case CURVE_CA:
-        case CURVE_CC:
-        case CURVE_OCP:
-        case CURVE_LSV:
-        case CURVE_IV_CY:
-        case CURVE_PULSE:
-        case CURVE_UNI_PULSE:
-        case CURVE_DPV:
-        case CURVE_DPV_SMPRATE:
-        case CURVE_DPV_ADVANCE:
-        case CURVE_DPV_ADVANCE_SMPRATE:
-            WORKLED();
-            break;
-
-        case CURVE_CALI_ADC:
-            if (instru.AdcChannel == RIS_ADC_IIN) {
-                Elite_led_color(COLOR_RED);
-            } else if (instru.AdcChannel == RIS_ADC_VIN) {
-                Elite_led_color(COLOR_ORANGE);
-            } else if (instru.AdcChannel == RIS_DAC_VOUT) {
-                Elite_led_color(COLOR_BLUE);
-            }
-            break;
-
-        default:
-            break;
-
-    }
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteLatchInit.h

@@ -1,16 +0,0 @@
-
-#ifndef ELITE_LATCH_INIT
-#define ELITE_LATCH_INIT
-
-static void InitLH() {
-    for (int i=0; i<LATCH_BUFF_SIZE; i++) {
-        LH.LATCH0[i]       = 0;
-        LH.LATCH1[i]       = 0;
-        LH.LATCH2[i]       = 0;
-    }
-    LH.LoadState    = 0;
-}
-
-
-#endif
-

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteNotify.h

@@ -1,151 +0,0 @@
-/**
- * notify data buffer.
- * the length equals to the characteristic 4 which value is 20 bytes.
- *
- */
-
-#ifndef ELITENOTIFY
-#define ELITENOTIFY
-
-#include "headstage.h"
-#include <string.h>
-
-/*notify's input type*/
-#define NOTIFY_CURRENT      0
-#define NOTIFY_VOLT         1
-#define NOTIFY_IMPEDANCE    2
-#define NOTIFY_VOLT_BAT     3
-#define NOTIFY_TEMPERATURE  4
-
-#define FINISH_MODE_INS 0b10100000
-
-static uint32_t not_time_stamp;
-static uint8_t  NotifyCurrent[4]   = {0};
-static uint8_t  NotifyVolt[4]      = {0};
-static uint8_t  NotifyImpedance[4] = {0};
-static uint16_t NotifyVoltBat      = 0;
-static uint16_t NotifyTemperature  = 0;
-static uint16_t NotifyCycleNumber  = 0;
-static bool  finishMode         = false;
-
-/*
- * Notify format
- *
- *
-         |               |   1           |       2       |           3   |
-         0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2
-         -----------------------------------------------------------------
-         |    header     |
-         |    current                                                    |
-         |    voltage                                                    |
-         |    impedance                                                  |
-         |    time stamp                                                 |
-         |  cycle number |
-
-     cycle number
-         for cyclic voltammetry use, we save it as channel number.
-         0xFF
-
-  * header = device ID
-  * I = current (nA),    V = voltage (uV),
-  * Z = impedance (ohm), T = time (ms)
-  *
-  *
-*/
-static void SendNotify() {
-    static uint8_t notify_times = 0;
-    uint32_t bat = NotifyVoltBat;
-
-    initDATBuf();
-
-    // 1 Timestamp = 32 usec;  31 Timestamp ~= 1 msec
-    not_time_stamp = (Timestamp_get32()) / 31;  // msec
-
-    not_buf[0] = instru.chip_id;
-
-    memcpy(not_buf+1, (uint8_t *)&not_time_stamp, sizeof(not_time_stamp));
-    memcpy(not_buf+5, NotifyCurrent, sizeof(NotifyCurrent));
-    memcpy(not_buf+9, NotifyVolt, sizeof(NotifyVolt));
-    memcpy(not_buf+13, NotifyImpedance, sizeof(NotifyImpedance));
-    memcpy(not_buf+17, (uint8_t *)&NotifyCycleNumber, sizeof(NotifyCycleNumber));
-
-    if (finishMode) {
-        not_buf[19] = (FINISH_MODE_INS) & 0b11110000;
-    } else {
-        not_buf[19] = 0 & 0b11110000;
-    }
-
-    memcpy(not_buf+20, (uint8_t *)&bat, sizeof(bat));
-    memcpy(not_buf+24, &notify_times, sizeof(notify_times));
-
-    for (int i = 25; i < BLE_DAT_BUFF_SIZE; i++){
-        not_buf[i] = 0;
-    }
-
-    SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
-    notify_times++;
-}
-
-static void initDATBuf(){
-    for (int i = 0; i < BLE_DAT_BUFF_SIZE; i++){
-        not_buf[i] = 0;
-    }
-}
-
-static void initINSBuf(){
-    for (int i = 0; i < BLE_INS_BUFF_SIZE; i++){
-        ins_buf[i] = 0;
-    }
-}
-
-static void initCISBuf(){
-    for (int i = 0; i < BLE_CIS_BUFF_SIZE; i++){
-        cis_buf[i] = 0;
-    }
-}
-
-static void initRawDataBuf(){
-    not_time_stamp    = 0;
-    NotifyCycleNumber = 0;
-    finishMode        = false;
-
-    for (int i = 0; i < 4; i++){
-        NotifyCurrent[i]   = 0;
-        NotifyVolt[i]      = 0;
-        NotifyImpedance[i] = 0;
-    }
-}
-
-static void FlushNotify(){
-    initRawDataBuf();
-    initDATBuf();
-
-    not_buf[0] = instru.chip_id;
-
-    SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
-}
-
-static void InputNotify(int NotifyType, int32_t Data){
-
-    switch (NotifyType) {
-        case NOTIFY_CURRENT:
-            memcpy(NotifyCurrent, (uint8_t *)&Data, sizeof(Data));
-            break;
-
-        case NOTIFY_IMPEDANCE:
-            memcpy(NotifyImpedance, (uint8_t *)&Data, sizeof(Data));
-            break;
-
-        case NOTIFY_VOLT :
-            memcpy(NotifyVolt, (uint8_t *)&Data, sizeof(Data));
-            break;
-
-        case NOTIFY_VOLT_BAT :
-            NotifyVoltBat = (uint16_t)Data;
-            break;
-        case NOTIFY_TEMPERATURE :
-            NotifyTemperature = (uint16_t)Data;
-            break;
-    }
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteReset.h

@@ -1,73 +0,0 @@
-
-#ifndef ELITERESET
-#define ELITERESET
-
-static void reset() {
-    megaStiEnable = false;
-    PeriodicEvent = false;     // is there an PeriodicEvent?
-    Free_Work_Mode = true;      // Free(WorkModeData)
-
-    initINSBuf();
-    initDATBuf();
-
-    PIN15_setOutputValue(HIGH_Z_MODE, 0); // HIGH Z MODE // 1: close; 0: open;
-
-    VinADCGainCtrl(VIN_GAIN_AUTO);
-    IinADCGainCtrl(I_GAIN_AUTO);
-
-    instru.VoutGainLv = VOUT_GAIN_15K;
-    VoutGainControl(instru.VoutGainLv);
-    DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLv, 25000));
-
-    for (int i = 0; i < SPI_LED_SIZE; i++) {
-        spi_LEDtxbuf[i] = 0;
-        spi_LEDrxbuf[i] = 0;
-    }
-
-    for (int i = 0; i < SPI_DAC_SIZE; i++) {
-        spi_DACtxbuf[i] = 0;
-        spi_rxbuf[i]    = 0;
-    }
-
-    for (int i = 0; i < SPI_ADC_SIZE; i++) {
-        spi_ADC_txbuf[i] = 0;
-        spi_ADC_rxbuf[i] = 0;
-    }
-
-    ModeLED(NO_EVENT);
-    CPUdelay(1600);
-}
-
-static void Eliteinterrupt() {
-    megaStiEnable = false;
-    PeriodicEvent = false;     // is there an PeriodicEvent?
-    Free_Work_Mode = true;      // Free(WorkModeData)
-
-    initINSBuf();
-    initDATBuf();
-
-    PIN15_setOutputValue(HIGH_Z_MODE, 0); // HIGH Z MODE // 1: close; 0: open;
-
-    instru.VoutGainLv = VOUT_GAIN_15K;
-    VoutGainControl(instru.VoutGainLv);
-    DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLv, 25000));
-
-    for (int i = 0; i < SPI_LED_SIZE; i++) {
-        spi_LEDtxbuf[i] = 0;
-        spi_LEDrxbuf[i] = 0;
-    }
-
-    for (int i = 0; i < SPI_DAC_SIZE; i++) {
-        spi_DACtxbuf[i] = 0;
-        spi_rxbuf[i]    = 0;
-    }
-
-    for (int i = 0; i < SPI_ADC_SIZE; i++) {
-        spi_ADC_txbuf[i] = 0;
-        spi_ADC_rxbuf[i] = 0;
-    }
-
-    ModeLED(NO_EVENT);
-    CPUdelay(8000);
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteSPI.h

@@ -1,137 +0,0 @@
-
-#ifndef ELITE_SPI
-#define ELITE_SPI
-
-/*
-* Read SPI example in
-* http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/tirtos/2_14_02_22/
-*        exports/tirtos_full_2_14_02_22/docs/doxygen/html/_s_p_i_c_c26_x_x_d_m_a_8h.html
-*/
-
-#include <Board.h>
-#include <ti/drivers/SPI.h>
-#include <ti/drivers/dma/UDMACC26XX.h>
-#include <ti/drivers/spi/SPICC26XXDMA.h>
-#include "Elite_PIN.h"
-
-/* application use SPI parameters and buffers */
-#define SPI_LED_SIZE 28
-#define SPI_DAC_SIZE 3
-#define SPI_ADC_SIZE 4
-
-static uint16_t spi_LEDtxbuf[SPI_LED_SIZE] = {0};
-static uint16_t spi_LEDrxbuf[SPI_LED_SIZE] = {0};
-
-static uint8_t spi_DACtxbuf[SPI_DAC_SIZE] = {0};
-static uint8_t spi_rxbuf[SPI_DAC_SIZE]    = {0};
-
-static uint8_t spi_ADC_txbuf[SPI_ADC_SIZE] = {0};
-static uint8_t spi_ADC_rxbuf[SPI_ADC_SIZE] = {0};
-
-/* system use SPI parameters */
-static SPI_Handle      spiHandle0 = NULL;  // SPI0  = LED
-static SPI_Handle      spiHandle1 = NULL;  // SPI1  = ADC +DAC
-static SPI_Params      spiParams0;
-static SPI_Params      spiParams1;
-static SPI_Transaction LED_transaction;
-static SPI_Transaction ADC_DAC_transaction;
-
-static void ELITE15_SPI_HOLD();
-static void ELITE15_SPI_CLOSE();
-
-static void Elite_SPI_init(){
-    SPI_init();
-    SPI_Params_init(&spiParams0);
-    spiParams0.bitRate     = 10000000;  // 10M
-    spiParams0.mode        = SPI_MASTER;
-    spiParams0.dataSize    = 16;
-    spiParams0.frameFormat = SPI_POL0_PHA1;
-    spiHandle0 = SPI_open(Board_SPI0, &spiParams0);  // LED SPI
-
-    SPI_Params_init(&spiParams1);
-    spiParams1.bitRate     = 10000000;  // 10M
-    spiParams1.mode        = SPI_MASTER;
-    spiParams1.dataSize    = 8;
-    spiParams1.frameFormat = SPI_POL0_PHA1;
-    spiHandle1 = SPI_open(Board_SPI1, &spiParams1);  // ADC DAC SPI
-}
-
-static void LED_SPI(uint8_t length, uint16_t *spi_txbuf, uint16_t *spi_rxbuf) {
-    LED_transaction.count = length;
-    LED_transaction.txBuf = spi_txbuf;
-    LED_transaction.rxBuf = spi_rxbuf;
-
-    SPI_transfer(spiHandle0, &LED_transaction);
-}
-
-static void ADC_SPI(uint8_t length, uint8_t *spi_txbuf, uint8_t *spi_rxbuf) {
-//    PIN15_setOutputValue(ADC_CS, 0);  // ADC_CS LOW
-    PIN_setOutputValue(pin_handle, LOAD0, 1);
-    PIN_setOutputValue(pin_handle, D6, 0); // ADC_CS LOW
-
-    ADC_DAC_transaction.count = length;
-    ADC_DAC_transaction.txBuf = spi_txbuf;
-    ADC_DAC_transaction.rxBuf = spi_rxbuf;
-
-    SPI_transfer(spiHandle1, &ADC_DAC_transaction);
-
-    PIN_setOutputValue(pin_handle, D6, 1); // ADC_CS HIGH
-    update_latch_status (ADC_CS, 1);
-//    PIN15_setOutputValue(ADC_CS, 1);  // ADC_CS HIGH
-}
-
-static void DAC_SPI(uint8_t length, uint8_t *spi_txbuf, uint8_t *spi_rxbuf) {
-//    PIN15_setOutputValue(DAC_CS, 0);            // DAC_CS LOW
-    PIN_setOutputValue(pin_handle, LOAD0, 1);
-    PIN_setOutputValue(pin_handle, D7, 0); // DAC_CS LOW
-
-    ADC_DAC_transaction.count = length;
-    ADC_DAC_transaction.txBuf = spi_txbuf;
-    ADC_DAC_transaction.rxBuf = spi_rxbuf;
-
-    SPI_transfer(spiHandle1, &ADC_DAC_transaction);
-
-    PIN_setOutputValue(pin_handle, D7, 1); // DAC_CS HIGH
-    update_latch_status (DAC_CS, 1);
-//    PIN15_setOutputValue(DAC_CS, 1);            // DAC_CS HIGH
-}
-
-static void ELITE15_SPI_HOLD() {
-    Elite_SPI_init();
-    #ifdef ELITE_PIN_1_5_RE
-    PIN_setOutputValue(pin_handle, D6, LH.LATCH0[6]);   // ADC_CS
-    PIN_setOutputValue(pin_handle, D7, LH.LATCH0[7]);   // DAC_CS
-    PIN_setOutputValue(pin_handle, D4, LH.LATCH0[4]);   // update HIGH_Z_MODE
-    #endif
-
-    PIN_setOutputValue(pin_handle, LOAD0, 1);
-    PIN_setOutputValue(pin_handle, LOAD1, 0);
-    PIN_setOutputValue(pin_handle, LOAD2, 0);
-}
-static void ELITE15_SPI_CLOSE() {
-    PIN_setOutputValue(pin_handle, LOAD0, 0);
-    PIN_setOutputValue(pin_handle, LOAD1, 0);
-    PIN_setOutputValue(pin_handle, LOAD2, 0);
-
-    SPI_close(spiHandle0);
-    SPI_close(spiHandle1);
-}
-
-/* Elite1.5 Calibration SPI */
-static void CAL_ADC_SPI(uint8_t length, uint8_t *spi_txbuf, uint8_t *spi_rxbuf) {
-//    PIN15_setOutputValue(ADC_CS, 0);  // ADC_CS LOW
-    PIN_setOutputValue(pin_handle, LOAD0, 1);
-    PIN_setOutputValue(pin_handle, D6, 0); // ADC_CS LOW
-
-    ADC_DAC_transaction.count = length;
-    ADC_DAC_transaction.txBuf = spi_txbuf;
-    ADC_DAC_transaction.rxBuf = spi_rxbuf;
-
-    SPI_transfer(spiHandle1, &ADC_DAC_transaction);
-
-    PIN_setOutputValue(pin_handle, D6, 1); // ADC_CS HOGH
-    update_latch_status (ADC_CS, 1);
-//    PIN15_setOutputValue(ADC_CS, 1);  // ADC_CS HIGH
-}
-
-#endif // ELITE_SPI

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/EliteWorkData.h

@@ -1,844 +0,0 @@
-/*=============================================================================
- =                          wm.h                                              =
- =============================================================================*/
-#ifndef ELITE_WORK_DATA_H
-#define ELITE_WORK_DATA_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#include "EliteInstruction.h"
-
-/***** Template of Measure and VoltOut parameter *****/
-#define VOUT_PARA                    \
-    int32_t  _Vinit;                 \
-    int32_t  _Vmax;                  \
-    int32_t  _Vmin;                  \
-    int32_t  _Vset;                  \
-    uint32_t _Vstep;                 \
-    bool     _direction_up;          \
-    bool     _current_direction_up;  \
-    uint16_t _cycleNumber
-
-#define MEAS_CURR(_m)      (((struct wm_meas_t *)(_m))->_measureCurrent)
-#define MEAS_VIN(_m)       (((struct wm_meas_t *)(_m))->_measureVin)
-#define MEAS_VOUT(_m)      (((struct wm_meas_t *)(_m))->_measureVout)
-#define MEAS_BAT(_m)       (((struct wm_meas_t *)(_m))->_measureBat)
-#define VOLT_SW(_m)        (((struct wm_meas_t *)(_m))->_VoViSwitch)
-
-struct wm_meas_t {
-    int32_t  _measureCurrent;
-    int32_t  _measureVin;
-    int32_t  _measureVout;
-    int32_t  _measureBat;
-    uint8_t  _VoViSwitch;
-};
-
-/* member of mode */
-struct wm_vo_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t _Vset;
-    int32_t _Vinit;
-};
-
-struct wm_it_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t _Vset;
-    int32_t _Vinit;
-};
-
-struct wm_vt_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-};
-
-struct wm_rt_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t _Vset;
-    int32_t _Vinit;
-};
-
-struct wm_iv_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    VOUT_PARA;
-};
-
-struct wm_iv_cy_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    VOUT_PARA;
-};
-
-struct wm_cc_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t _Vmax;
-    int32_t _Vmin;
-    int32_t _Vset;
-    int32_t _Iset;
-    uint8_t _charge;
-};
-
-struct wm_cv_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    VOUT_PARA;
-};
-
-struct wm_lsv_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    VOUT_PARA;
-};
-
-struct wm_ca_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t _Vinit;
-    int32_t _Vset;
-};
-
-struct wm_pulse_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t  _Vset;
-    int32_t  _sti_v1;
-    int32_t  _sti_v2;
-    int32_t  _sti_v3;
-    int32_t  _sti_v4;
-    int32_t  _sti_v5;
-    int32_t  _sti_v6;
-    int32_t  _sti_v7;
-    int32_t  _sti_t1;
-    int32_t  _sti_t2;
-    int32_t  _sti_t3;
-    int32_t  _sti_t4;
-    int32_t  _sti_t5;
-    int32_t  _sti_t6;
-    int32_t  _sti_t7;
-    int32_t  _sti_t;
-    int32_t  _sti_v;         //output voltage now
-    int32_t  _sti_t_flag;    //Where's the time stage turn
-    uint16_t _sti_cy;
-    uint16_t _sti_lp;
-};
-
-struct wm_uni_pulse_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t  _Vset;
-
-    int32_t _v0;
-    uint32_t _t_pulse[4];
-    int32_t _v_initial[4];
-    int32_t _v_slope[4];
-    int32_t _v_step[4];
-
-    uint32_t _t_period;
-    uint32_t _t_pa[4];
-
-    uint32_t _t_pulse_min[4];
-    uint32_t _t_pulse_max[4];
-};
-
-struct wm_dpv_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t  _Vset;
-
-    int32_t _v0;
-    uint32_t _t_pulse[4];
-    int32_t _v_initial[4];
-    int32_t _v_slope[4];
-    int32_t _v_step[4];
-
-    uint32_t _t_period;
-    uint32_t _t_pa[4];
-    int32_t _v_stop;
-    bool _v_curr_direc;
-    int32_t _v_amp;
-
-    uint32_t _t_pulse_min[4];
-    uint32_t _t_pulse_max[4];
-
-    bool _v_direc_init;
-};
-
-struct wm_dpv_advance_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-    int32_t  _Vset;
-
-    int32_t _v0;
-    uint32_t _t_pulse[4];
-    int32_t _v_initial[4];
-    int32_t _v_slope[4];
-    int32_t _v_step[4];
-
-    uint32_t _t_period;
-    uint32_t _t_pa[4];
-    int32_t _v_stop;
-    int32_t _v_up;
-    int32_t _v_low;
-    int32_t _v_amp;
-    int32_t _v_1;
-    int32_t _v_2;
-
-    uint32_t _t_pulse_min[4];
-    uint32_t _t_pulse_max[4];
-
-    uint16_t _cycleNumber;
-
-    bool _v_curr_direc;
-    bool _v_direc_init;
-    bool _v_invert_option;
-    bool _v_stop_direction;
-};
-
-struct wm_ocp_ctx_t {
-    /* WARNING: please keep MEASURE at first!! */
-    struct wm_meas_t measure;
-};
-
-int wm_init(void);
-int wm_deinit(void);
-void *wm_get(void);
-
-/*=============================================================================
- =                          wm.c                                              =
- =============================================================================*/
-
-static void *workMode_p = NULL;
-static bool Free_Work_Mode = false;
-
-/* init mode func */
-static int __vo_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_vo_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_vo_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __it_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_it_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_it_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __vt_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_vt_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_vt_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __rt_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_rt_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_rt_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __iv_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_iv_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_iv_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vmax           = (instru.Vmax  - 25000) * 4 * 10000; //[5nV]
-    p->_Vmin           = (instru.Vmin  - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-    p->_Vstep          = 0;
-    p->_direction_up   = true;
-    p->_current_direction_up = true;
-    p->_cycleNumber    = instru.cycleNumber;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __iv_cy_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_iv_cy_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_iv_cy_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vmax           = (instru.Vmax  - 25000) * 4 * 10000; //[5nV]
-    p->_Vmin           = (instru.Vmin  - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-    p->_Vstep          = 0;
-    p->_direction_up   = true;
-    p->_current_direction_up = true;
-    p->_cycleNumber    = instru.cycleNumber;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __cc_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_cc_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_cc_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vmax           = (instru.Vmax  - 25000) * 4 * 10000; //[5nV]
-    p->_Vmin           = (instru.Vmin  - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-    p->_charge         = instru.charge;
-    p->_Iset           = instru.constantCurrent * 200 ;
-    //[50pA] //controller UI 15000uA => Elite 1500000 => 1500000 * 10 * 1000 / 50 [50pA]
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __cv_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_cv_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_cv_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-	p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vmax           = (instru.Vmax  - 25000) * 4 * 10000; //[5nV]
-    p->_Vmin           = (instru.Vmin  - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-    p->_Vstep          = 0;
-    p->_direction_up   = true;
-    p->_current_direction_up = true;
-    p->_cycleNumber    = instru.cycleNumber;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __lsv_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_lsv_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_lsv_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-	p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vmax           = (instru.Vmax  - 25000) * 4 * 10000; //[5nV]
-    p->_Vmin           = (instru.Vmin  - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-    p->_Vstep          = 0;
-    p->_direction_up   = true;
-    p->_current_direction_up = true;
-    p->_cycleNumber    = instru.cycleNumber;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __ca_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_ca_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_ca_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vinit          = (instru.Vinit - 25000) * 4 * 10000; //[5nV]
-    p->_Vset           = 0;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __pulse_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_pulse_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_pulse_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vset           = 0;
-    p->_sti_v1         = instru.sti_v1;
-    p->_sti_v2         = instru.sti_v2;
-    p->_sti_v3         = instru.sti_v3;
-    p->_sti_v4         = instru.sti_v4;
-    p->_sti_v5         = instru.sti_v5;
-    p->_sti_v6         = instru.sti_v6;
-    p->_sti_v7         = instru.sti_v7;
-    p->_sti_t1         = instru.sti_t1;
-    p->_sti_t2         = instru.sti_t2;
-    p->_sti_t3         = instru.sti_t3;
-    p->_sti_t4         = instru.sti_t4;
-    p->_sti_t5         = instru.sti_t5;
-    p->_sti_t6         = instru.sti_t6;
-    p->_sti_t7         = instru.sti_t7;
-    p->_sti_t          = instru.sti_t1;
-    p->_sti_v          = instru.sti_v1;
-    p->_sti_t_flag     = 1;
-    p->_sti_cy         = instru.sti_cy;
-    p->_sti_lp         = instru.sti_loop;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __uni_pulse_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_uni_pulse_ctx_t *p;
-    void **wm = &workMode_p;
-    uint32_t pul_acc = 0;
-    int i;
-
-    p = malloc(sizeof(struct wm_uni_pulse_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vset           = 0;
-
-    p->_v0             = UC_TO_5NV(instru.v0); //[5nV]
-
-    p->_t_pulse[0]     = instru.t_pulse[0];
-    p->_t_pulse[1]     = instru.t_pulse[1];
-    p->_t_pulse[2]     = instru.t_pulse[2];
-    p->_t_pulse[3]     = instru.t_pulse[3];
-
-    p->_v_initial[0]   = UC_TO_5NV(instru.v_initial[0]); //[5nv]
-    p->_v_initial[1]   = UC_TO_5NV(instru.v_initial[1]); //[5nv]
-    p->_v_initial[2]   = UC_TO_5NV(instru.v_initial[2]); //[5nv]
-    p->_v_initial[3]   = UC_TO_5NV(instru.v_initial[3]); //[5nv]
-
-    p->_v_slope[0]     = instru.v_slope[0];
-    p->_v_slope[1]     = instru.v_slope[1];
-    p->_v_slope[2]     = instru.v_slope[2];
-    p->_v_slope[3]     = instru.v_slope[3];
-
-    p->_v_step[0]      = UC_TO_5NV(instru.v_step[0]); //[5nv]
-    p->_v_step[1]      = UC_TO_5NV(instru.v_step[1]); //[5nv]
-    p->_v_step[2]      = UC_TO_5NV(instru.v_step[2]); //[5nv]
-    p->_v_step[3]      = UC_TO_5NV(instru.v_step[3]); //[5nv]
-
-    p->_t_period = 0;
-
-    for (i=0; i<4; i++) {
-        p->_t_pa[i] = pul_acc + p->_t_pulse[i];
-        pul_acc = p->_t_pa[i];
-        p->_t_period += p->_t_pulse[i];
-    }
-
-    instru.period = p->_t_period;
-
-    p->_t_pulse_min[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_min[0] / 100 + 50;
-    p->_t_pulse_min[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_min[1] / 100 + 50;
-    p->_t_pulse_min[2]     = (instru.t_pulse[2] - 100) * instru.t_pulse_min[2] / 100 + 50;
-    p->_t_pulse_min[3]     = (instru.t_pulse[3] - 100) * instru.t_pulse_min[3] / 100 + 50;
-
-    p->_t_pulse_max[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_max[0] / 100 + 50;
-    p->_t_pulse_max[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_max[1] / 100 + 50;
-    p->_t_pulse_max[2]     = (instru.t_pulse[2] - 100) * instru.t_pulse_max[2] / 100 + 50;
-    p->_t_pulse_max[3]     = (instru.t_pulse[3] - 100) * instru.t_pulse_max[3] / 100 + 50;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __dpv_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_dpv_ctx_t *p;
-    void **wm = &workMode_p;
-    uint32_t pul_acc = 0;
-    int i;
-
-    p = malloc(sizeof(struct wm_dpv_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vset           = 0;
-
-    p->_v0             = instru.v0; //[5nV]
-    p->_v_stop         = instru.v_stop; //[5nV]
-
-    p->_t_pulse[0]     = instru.t_pulse[0];
-    p->_t_pulse[1]     = instru.t_pulse[1];
-
-    p->_v_initial[0]   = instru.v_initial[0]; //[5nv]
-    p->_v_initial[1]   = instru.v_initial[1]; //[5nv]
-
-    p->_v_slope[0]     = instru.v_slope[0];
-    p->_v_slope[1]     = instru.v_slope[1];
-
-    p->_v_step[0]      = instru.v_step[0]; //[5nv]
-    p->_v_step[1]      = instru.v_step[1]; //[5nv]
-
-    p->_t_period = 0;
-
-    for (i=0; i<4; i++) {
-        p->_t_pa[i] = pul_acc + p->_t_pulse[i];
-        pul_acc = p->_t_pa[i];
-        p->_t_period += p->_t_pulse[i];
-    }
-
-    instru.period = p->_t_period;
-
-    p->_v_direc_init   = instru.directionInit;
-    p->_v_curr_direc = instru.directionInit;
-    p->_v_amp = instru.v_initial[1] - instru.v_initial[0];
-
-    p->_t_pulse_min[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_min[0] / 100 + 50;
-    p->_t_pulse_min[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_min[1] / 100 + 50;
-
-    p->_t_pulse_max[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_max[0] / 100 + 50;
-    p->_t_pulse_max[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_max[1] / 100 + 50;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __dpv_advance_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_dpv_advance_ctx_t *p;
-    void **wm = &workMode_p;
-    uint32_t pul_acc = 0;
-    int i;
-
-    p = malloc(sizeof(struct wm_dpv_advance_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    p->_Vset           = 0;
-
-    p->_v0             = instru.v0; //[5nV]
-    p->_v_stop         = instru.v_stop; //[5nV]
-
-    p->_t_pulse[0]     = instru.t_pulse[0];
-    p->_t_pulse[1]     = instru.t_pulse[1];
-
-    p->_v_initial[0]   = instru.v_initial[0]; //[5nv]
-    p->_v_initial[1]   = instru.v_initial[1]; //[5nv]
-
-    p->_v_slope[0]     = instru.v_slope[0];
-    p->_v_slope[1]     = instru.v_slope[1];
-
-    p->_v_step[0]      = instru.v_step[0]; //[5nv]
-    p->_v_step[1]      = instru.v_step[1]; //[5nv]
-
-    p->_t_period = 0;
-
-    for (i=0; i<4; i++) {
-        p->_t_pa[i] = pul_acc + p->_t_pulse[i];
-        pul_acc = p->_t_pa[i];
-        p->_t_period += p->_t_pulse[i];
-    }
-
-    instru.period = p->_t_period;
-
-    p->_v_direc_init   = instru.directionInit;
-    p->_v_curr_direc = instru.directionInit;
-    p->_v_stop_direction = instru.v_stop_direction;
-    p->_v_up = instru.v_up;
-    p->_v_low = instru.v_low;
-    p->_v_amp = instru.v_initial[1] - instru.v_initial[0];
-    p->_v_1 = instru.v_1;
-    p->_v_2 = instru.v_2;
-
-    p->_t_pulse_min[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_min[0] / 100 + 50;
-    p->_t_pulse_min[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_min[1] / 100 + 50;
-
-    p->_t_pulse_max[0]     = (instru.t_pulse[0] - 100) * instru.t_pulse_max[0] / 100 + 50;
-    p->_t_pulse_max[1]     = (instru.t_pulse[1] - 100) * instru.t_pulse_max[1] / 100 + 50;
-
-    p->_cycleNumber = instru.cycleNumber;
-    p->_v_invert_option = instru.v_invert_option;
-
-    *wm = p;
-
-    return 0;
-}
-
-static int __ocp_create(void)
-{
-    struct wm_meas_t *m;
-    struct wm_ocp_ctx_t *p;
-    void **wm = &workMode_p;
-
-    p = malloc(sizeof(struct wm_ocp_ctx_t));
-    if (!p) return -1;
-
-    m = (struct wm_meas_t *)p;
-    m->_measureCurrent = 0;
-    m->_measureVin     = 0;
-    m->_measureVout    = 0;
-    m->_measureBat     = 0;
-    m->_VoViSwitch     = instru.VoViSwitch;
-
-    *wm = p;
-
-    return 0;
-}
-
-int wm_init(void)
-{
-    int mode = instru.eliteFxn;
-    void **wm = &workMode_p;
-
-    if (*wm) return -1;
-
-    switch (mode) {
-        case CURVE_VO:
-            if (__vo_create()) return -2;
-            break;
-
-        case CURVE_IT:
-            if (__it_create()) return -2;
-            break;
-
-        case CURVE_VT:
-            if (__vt_create()) return -2;
-            break;
-
-        case CURVE_RT:
-            if (__rt_create()) return -2;
-            break;
-
-        case CURVE_IV:
-            if (__iv_create()) return -2;
-            break;
-
-        case CURVE_IV_CY:
-            if (__iv_cy_create()) return -2;
-            break;
-
-        case CURVE_CC:
-            if (__cc_create()) return -2;
-            break;
-
-        case CURVE_CV:
-            if (__cv_create()) return -2;
-            break;
-
-        case CURVE_LSV:
-            if (__lsv_create()) return -2;
-            break;
-
-        case CURVE_CA:
-            if (__ca_create()) return -2;
-            break;
-
-        case CURVE_PULSE:
-            if (__pulse_create()) return -2;
-            break;
-
-        case CURVE_UNI_PULSE:
-            if (__uni_pulse_create()) return -2;
-            break;
-
-        case CURVE_OCP:
-            if (__ocp_create()) return -2;
-            break;
-
-        case CURVE_DPV:
-        case CURVE_DPV_SMPRATE:
-            if (__dpv_create()) return -2;
-            break;
-        case CURVE_DPV_ADVANCE:
-        case CURVE_DPV_ADVANCE_SMPRATE:
-            if (__dpv_advance_create()) return -2;
-            break;
-
-        default:
-            // printf("DO NOT support!!");
-            return -3;
-    }
-
-    return 0;
-}
-
-int wm_deinit(void)
-{
-    void **wm = &workMode_p;
-
-    if (*wm) {
-        free(*wm);
-        *wm = NULL;
-    } else {
-        return -1;
-    }
-
-    return 0;
-}
-
-void *wm_get(void)
-{
-    void *wm = workMode_p;
-
-    return wm;
-}
-
-#ifdef  __cplusplus
-}
-#endif
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_PIN.h

@@ -1,252 +0,0 @@
-
-#ifndef Elite_PIN
-#define Elite_PIN
-
-#include <ti/drivers/pin/PINCC26XX.h>
-#include <Board.h>
-#include <ti/drivers/PIN.h>
-
-//#define ELITE_PIN_1_5
-#define ELITE_PIN_1_5_RE
-
-/* SPI Board */
-#define Board_SPI0_MISO                 PIN_UNASSIGNED
-#define Board_SPI0_MOSI                 D1
-#define Board_SPI0_CLK                  D0
-#define Board_SPI0_CS                   PIN_UNASSIGNED
-
-#define Board_SPI1_MISO                 IOID_1
-#define Board_SPI1_MOSI                 D3
-#define Board_SPI1_CLK                  D2
-#define Board_SPI1_CS                   PIN_UNASSIGNED
-
-#define D0                              IOID_3
-#define D1                              IOID_4
-#define D2                              IOID_5
-#define D3                              IOID_6
-#define D4                              IOID_7
-#define D5                              IOID_8
-#define D6                              IOID_9
-#define D7                              IOID_10
-
-#define LOAD0                           IOID_13
-#define LOAD1                           IOID_12
-#define LOAD2                           IOID_11
-
-#define ADC_CS                          LOAD0, D6
-#define DAC_CS                          LOAD0, D7
-#define ADC_DAC_SPI_MOSI                LOAD0, D3
-#define ADC_DAC_SPI_CLK                 LOAD0, D2
-#define LED_MOSI                        LOAD0, D1
-#define LED_CLK                         LOAD0, D0
-#define MEM_CS                          LOAD0, D5
-
-#ifdef ELITE_PIN_1_5
-#define MEM_HOLD                        LOAD0, D4
-#define HIGH_Z_MODE                     LOAD2, D5
-#endif
-#ifdef ELITE_PIN_1_5_RE
-#define MEM_HOLD                        LOAD1, D0
-#define HIGH_Z_MODE                     LOAD0, D4
-#endif
-
-#define Turnon_I_MID                    LOAD2, D0
-#define Turnon_I_SMALL                  LOAD2, D4
-#define Turnon_I_LARGE                  LOAD2, D1
-#define Turnon_V_SMALL                  LOAD2, D2
-#define Turnon_V_MID                    LOAD2, D3
-#define Turnon_VOUT_SMALL                LOAD2, D7
-#define shutdown_6994                   LOAD2, D6
-
-//#define Turnon10K                       Turnon_I_MID
-//#define Turnon200R                      Turnon_I_LARGE
-
-/* I2C */
-#ifdef ELITE_VERSION_1_4
-#define Board_I2C0_SCL0                 PIN_UNASSIGNED
-#define Board_I2C0_SDA0                 PIN_UNASSIGNED
-#endif
-
-#define switch_on                       IOID_14
-#define enable_10v                      LOAD1, D5
-#define enable_5v                       LOAD1, D6
-
-PIN_Handle       pin_handle;
-static PIN_State ZM_rst;
-
-const PIN_Config BLE_IO[] = {
-//    D0 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-//    D1 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-//    D2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-//    D3 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    D4 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    D5 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    D6 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    D7 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-
-    LOAD0 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    LOAD1 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    LOAD2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-
-    switch_on | PIN_INPUT_EN | PIN_PULLDOWN,                                    // to sense switch
-
-    PIN_TERMINATE
-};
-
-static void add_elite_pin() {
-//    PIN_Status elite15_status;
-    PIN_add(pin_handle,
-    D0 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-    PIN_add(pin_handle,
-    D1 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-    PIN_add(pin_handle,
-    D2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-    PIN_add(pin_handle,
-    D3 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL);
-
-//    if(elite15_status != PIN_SUCCESS) {
-//        LED_color(DARKLED, 0x0F, 0x0F, 0x0F);
-//    }
-}
-
-static void remove_elite_pin() {
-    PIN_close(pin_handle);
-    pin_handle = PIN_open(&ZM_rst, BLE_IO);
-}
-
-/*!
- *  @def    BOOSTXL_CC2650MA_SPIName
- *  @brief  Enum of SPI names on the CC2650 Booster Pack
- */
-typedef enum BOOSTXL_CC2650MA_SPIName {
-    BOOSTXL_CC2650MA_SPI0 = 0,
-    BOOSTXL_CC2650MA_SPI1 = 1,
-
-    BOOSTXL_CC2650MA_SPICOUNT
-} BOOSTXL_CC2650MA_SPIName;
-
-/*
- *  ========================== SPI DMA begin ===================================
- */
-/* Place into subsections to allow the TI linker to remove items properly */
-#if defined(__TI_COMPILER_VERSION__)
-#pragma DATA_SECTION(SPI_config, ".const:SPI_config")
-#pragma DATA_SECTION(spiCC26XXDMAHWAttrs, ".const:spiCC26XXDMAHWAttrs")
-#endif
-
-/* Include drivers */
-#include <ti/drivers/spi/SPICC26XXDMA.h>
-
-/* SPI objects */
-SPICC26XXDMA_Object spiCC26XXDMAObjects[BOOSTXL_CC2650MA_SPICOUNT];
-
-/* SPI configuration structure, describing which pins are to be used */
-const SPICC26XXDMA_HWAttrsV1 spiCC26XXDMAHWAttrs[BOOSTXL_CC2650MA_SPICOUNT] = {
-    {
-        .baseAddr           = SSI0_BASE,
-        .intNum             = INT_SSI0_COMB,
-        .intPriority        = ~0,
-        .swiPriority        = 0,
-        .powerMngrId        = PowerCC26XX_PERIPH_SSI0,
-        .defaultTxBufValue  = 0,
-        .rxChannelBitMask   = 1<<UDMA_CHAN_SSI0_RX,
-        .txChannelBitMask   = 1<<UDMA_CHAN_SSI0_TX,
-        .mosiPin            = Board_SPI0_MOSI,
-        .misoPin            = Board_SPI0_MISO,
-        .clkPin             = Board_SPI0_CLK,
-        .csnPin             = Board_SPI0_CS
-    },
-    {
-        .baseAddr           = SSI1_BASE,
-        .intNum             = INT_SSI1_COMB,
-        .intPriority        = ~0,
-        .swiPriority        = 0,
-        .powerMngrId        = PowerCC26XX_PERIPH_SSI1,
-        .defaultTxBufValue  = 0,
-        .rxChannelBitMask   = 1<<UDMA_CHAN_SSI1_RX,
-        .txChannelBitMask   = 1<<UDMA_CHAN_SSI1_TX,
-        .mosiPin            = Board_SPI1_MOSI,
-        .misoPin            = Board_SPI1_MISO,
-        .clkPin             = Board_SPI1_CLK,
-        .csnPin             = Board_SPI1_CS
-    },
-};
-
-/* SPI configuration structure */
-const SPI_Config SPI_config[] = {
-    {
-         .fxnTablePtr = &SPICC26XXDMA_fxnTable,
-         .object      = &spiCC26XXDMAObjects[0],
-         .hwAttrs     = &spiCC26XXDMAHWAttrs[0]
-    },
-    {
-         .fxnTablePtr = &SPICC26XXDMA_fxnTable,
-         .object      = &spiCC26XXDMAObjects[1],
-         .hwAttrs     = &spiCC26XXDMAHWAttrs[1]
-    },
-    {NULL, NULL, NULL}
-};
-/*
- *  ========================== SPI DMA end =====================================
-*/
-
-
-/*
- *  ============================= I2C Begin=====================================
-*/
-
-#ifdef ELITE_VERSION_1_4
-
-/* Generic I2C instance identifiers */
-#define Board_I2C                   CC2650_MA_I2C0
-/*!
- *  @def    CC2650_LAUNCHXL_I2CName
- *  @brief  Enum of I2C names on the CC2650 dev board
- */
-typedef enum CC2650_MA_I2CName {
-    CC2650_MA_I2C0 = 0,
-
-    CC2650_MA_I2CCOUNT
-} CC2650_MA_I2CName;
-
-/* Place into subsections to allow the TI linker to remove items properly */
-#if defined(__TI_COMPILER_VERSION__)
-#pragma DATA_SECTION(I2C_config, ".const:I2C_config")
-#pragma DATA_SECTION(i2cCC26xxHWAttrs, ".const:i2cCC26xxHWAttrs")
-#endif
-
-/* Include drivers */
-#include <ti/drivers/i2c/I2CCC26XX.h>
-
-/* I2C objects */
-I2CCC26XX_Object i2cCC26xxObjects[CC2650_MA_I2CCOUNT];
-
-/* I2C configuration structure, describing which pins are to be used */
-const I2CCC26XX_HWAttrsV1 i2cCC26xxHWAttrs[CC2650_MA_I2CCOUNT] = {
-    {
-        .baseAddr = I2C0_BASE,
-        .powerMngrId = PowerCC26XX_PERIPH_I2C0,
-        .intNum = INT_I2C_IRQ,
-        .intPriority = ~0,
-        .swiPriority = 0,
-        .sdaPin = Board_I2C0_SDA0,
-        .sclPin = Board_I2C0_SCL0,
-    }
-};
-
-/* I2C configuration structure */
-const I2C_Config I2C_config[] = {
-    {
-        .fxnTablePtr = &I2CCC26XX_fxnTable,
-        .object = &i2cCC26xxObjects[0],
-        .hwAttrs = &i2cCC26xxHWAttrs[0]
-    },
-    {NULL, NULL, NULL}
-};
-/*
- *  ========================== I2C end =========================================
- */
-#endif
-
-#endif
-

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_batt.h

@@ -1,99 +0,0 @@
-/*
-***********************************************************
-    Read battery's method
-***********************************************************
-1.read_adc_raw_data(RIS_ADC_BAT, spi_ADC_rxbuf, spi_ADC_txbuf);
-  let "spi_ADC_rxbuf" be 8000
-  8000 * 187.5uV * 2 = 3000000uV = 3V ;
-2.AONBatMonBatteryVoltageGet()
-  let "AONBatMonBatteryVoltageGet()" be 768
-  768 * 125 / 320 / 100 = 768 / 256 = 3V ;
-
-if you want to use first method, and get value 768
-conversion: 8000 * 187.5 * 1e-6 * 2 / 125 * 320 * 100 = 768
-         => 8000 * 12 / 125 = 768
-*/
-
-#ifndef HEADSTAGE_BATT_H
-#define HEADSTAGE_BATT_H
-
-#include <driverlib/aon_batmon.h>
-#define MAX_BATTERY_CAPACITY 4200
-
-static uint8_t headstage_battery_percent() {
-    static uint8_t battery_percent = 100;
-    uint8_t  internal_battery_percent;
-    uint32_t internal_batt_sense = AONBatMonBatteryVoltageGet();
-    internal_batt_sense          = (internal_batt_sense * 125) >> 5;
-    internal_batt_sense          = (internal_batt_sense * 100) / MAX_BATTERY_CAPACITY;
-    internal_battery_percent     = internal_batt_sense & 0xFF;
-    if (internal_battery_percent < battery_percent) battery_percent = internal_battery_percent;
-    return battery_percent;
-}
-
-static void headstage_battery_volt(){
-    uint32_t bat_volt = 0;
-
-    read_adc_raw_data(RIS_ADC_BAT, spi_ADC_rxbuf, spi_ADC_txbuf);
-    bat_volt = (uint32_t) (spi_ADC_rxbuf[0] << 8) | (uint32_t) (spi_ADC_rxbuf[1]);
-    bat_volt = bat_volt * 12 / 125; //x  * 187.5 * 1e-6 * 2 / 125 * 320 * 100 ;
-//    bat_volt = (bat_volt - 1) * 187.5 * 2;
-
-    InputNotify(NOTIFY_VOLT_BAT, bat_volt);
-}
-
-static void headstage_temperature(void) {
-    int32_t curTemp = 0;
-
-    curTemp = AONBatMonTemperatureGetDegC();
-    InputNotify(NOTIFY_TEMPERATURE,curTemp);
-}
-
-static bool EliteADCBattery(){
-    static uint8_t ADCSwitch = 0;
-    bool read_adc_flag = false;
-    if(ADCSwitch == 0){ /**read V**/
-        read_adc_raw_data(RIS_ADC_BAT, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADCSwitch++;
-    }
-    else if(ADCSwitch == 1){ /**read V**/
-        read_adc_raw_data(RIS_ADC_BAT, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADCSwitch++;
-    }
-    else if(ADCSwitch == 2){ /**read V(buffer)**/
-        headstage_battery_volt();
-        headstage_temperature();
-        ADCSwitch++;
-        read_adc_flag = true;
-
-    }else if(ADCSwitch == 3){
-        batteryCheck_flag = false;
-        tempCheck_flag = false;
-        ADCSwitch = 0;
-    }
-
-    return read_adc_flag;
-}
-
-static void measureBat(){
-    if(GPT.BatteryCheckCounter >= 50000){//5min=3000000, 5s=50000
-        GPT.BatteryCheckCounter = 0;
-        batteryCheck_flag = true;
-    }
-
-    if(GPT.BatteryADCCounter >= 15 && batteryCheck_flag){
-        GPT.BatteryADCCounter = 0; //To get the data right, ADC must be delay 1.5ms
-        batteryADC_flag = true;
-        if(batteryADC_flag){
-            EliteADCBattery();
-            batteryADC_flag = false;
-        }
-    }
-
-    uint16_t bat = NotifyVoltBat;
-    if( bat < 768 && bat > 20){
-        PIN15_setOutputValue(enable_5v, 0);
-    }
-}
-
-#endif  // HEADSTAGE_BATT_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_def.h

@@ -1,116 +0,0 @@
-#ifndef ELITE_DEF
-#define ELITE_DEF
-
-// define BT instruction
-#define INS_TYPE_RIS                    0x30
-#define INS_TYPE_VIS                    0xC0
-#define INS_TYPE_CIS                    0x70
-
-// VIS (virtual instruction)
-#define VIS_RST                         0xF0
-#define VIS_ASK                         0x30
-#define VIS_STI                         0xC0
-#define VIS_FUH                         0x90
-#define VIS_INT                         0x60
-#define VIS_SHIFT_200K                  0xA0
-#define VIS_SHIFT_10K                   0xE0
-#define VIS_SHIFT_200R                  0x80
-#define VIS_DEVICE_SHINY                0x10
-#define VIS_SHINY_DIS                   0x20
-#define VIS_CC_ZERO                     0x40
-
-// RIS (real instruction)
-enum all_mode_e {
-    CURVE_IV                       =  0x01, // I-V Curve                       //0x10,
-    CURVE_IV_CY                    =  0x02, // Cycle I-V                       //0x20,
-    CURVE_VO                       =  0x03, // Function Generator              //0x30,
-    CURVE_RT                       =  0x04, // R-T Graph                       //0x40,
-    CURVE_VT                       =  0x05, // V-T Graph                       //0x50,
-    CURVE_IT                       =  0x06, // I-T Graph                       //0x60,
-    CURVE_CC                       =  0x07, // Constant Current (CC)           //0xD0,
-    CURVE_OCP                      =  0x08, // Open Circuit Potential (OCP)
-    CURVE_CV                       =  0x09, // Cyclic Voltammetry (CV)         //0xC0,
-    CURVE_LSV                      =  0x0A, // Linear Sweep Voltammetry (LSV)  //0x02,
-    CURVE_CA                       =  0x0B, // Chronoamperometric Graph (CA)   //0x03,
-    CURVE_PULSE                    =  0x0C,                                    //0x94,
-    CURVE_UNI_PULSE                =  0x0D, // universal pulse
-    CURVE_DPV                      =  0x0E,
-    CURVE_DPV_SMPRATE              =  0x0F,
-    CURVE_DPV_ADVANCE              =  0x10,
-    CURVE_DPV_ADVANCE_SMPRATE      =  0x11,
-
-    CURVE_CALI_ADC                 =  0xF1, // Cali ADC - test                 //0x92,
-
-
-    SET_SAMPLE_RATE                =  0xE0,                                    //0x70,
-    SET_ADC_DAC_GAIN               =  0xE1,                                    //0x80,
-    SET_PARA                       =  0xE2
-};
-
-enum set_para_e {
-    DAC_VOLT                        = 0x01,
-};
-
-enum dev_para_e {
-    VERSION_DEV_TEST                = 0x01,
-    BAT_DEV_TEST                    = 0x02,
-    TEMP_DEV_TEST                   = 0x03,
-    LED_DEV_TEST                    = 0x04,
-};
-
-
-// CIS (control instruction)
-#define CIS_VERSION                     0x40
-#define CIS_VOLT                        0x10
-#define CIS_TEMPERATURE                 0x80
-
-// mode parameter
-#define STEP_TO_VSETRATE(step)   step2VsetRate(step)
-#define VMAX(v1,v2)              ((v1 >= v2) ? v1 : v2)
-#define VMIN(v1,v2)              ((v1 < v2)  ? v1 : v2)
-#define VDIRECTION(v1,v2)        ((v1 > v2)  ?  0 : 1)
-#define AFTER_READ_I             0
-#define AFTER_READ_V             1
-
-//Elite LED
-#define COLOR_BLACK              0x00
-#define COLOR_RED                0x01
-#define COLOR_ORANGE             0x02
-#define COLOR_YELLOW             0x03
-#define COLOR_GREEN              0x04
-#define COLOR_BLUE               0x05
-#define COLOR_CYAN               0x06
-#define COLOR_MAGENTA            0x07
-#define COLOR_PURPLE             0x08
-#define COLOR_WHITE              0x09
-#define COLOR_YELLOWGREEN        0x0A
-#define COLOR_YELLOW_DARK        0xF3
-#define COLOR_GREEN_DARK         0xF4
-#define COLOR_BLUE_DARK          0xF5
-#define COLOR_CYAN_DARK          0xF6
-#define COLOR_PURPLE_DARK        0xF8
-
-#define LEDPowerON()             Elite_led_color(COLOR_GREEN)
-#define WORKLED()                Elite_led_color(COLOR_CYAN)
-#define KEYLED()                 Elite_led_color(COLOR_YELLOW)
-#define BT_WAIT_LED()            Elite_led_color(COLOR_YELLOWGREEN)
-
-
-#define BT_WAIT                  0x01
-#define NO_EVENT                 0x02
-#define PRE_WORK                 0x03
-#define WORKING                  0x04
-#define POST_WORK                0x05
-
-#define VALUE_ZERO_TO_ONE(_v)    (_v == 0) ? 1 : _v
-
-//plot_type
-#define IT_PLOT             1
-#define VT_PLOT             2
-#define VOUT_PLOT           3
-#define IIN_VIN_PLOT        4
-#define IIN_VIN_VOUT_PLOT   5
-
-#define CLOCK_ONE_SECOND 10000
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_mode_ADC_DAC.h

@@ -1,908 +0,0 @@
-#ifndef ELITE_MODE_ADC_DAC
-#define ELITE_MODE_ADC_DAC
-
-#define Vset instru.Vset
-
-static void volt_out() {
-    static uint16_t DACOutCode;
-    static int32_t DeltaVout;
-
-    if (DACReset) {
-        instru.Vout = Vset;
-    } else {
-        DeltaVout = Vset - (instru.Vout);
-        instru.Vout = instru.Vout + DeltaVout;
-    }
-
-
-    if (instru.Vout >= 1100000000) { //1100000000 = 5.5V
-        instru.Vout = 1100000000;
-    } else if (instru.Vout <= -1000000000) {  //-1000000000 = -5V
-        instru.Vout = -1000000000;
-    }
-
-    instru.VoltConstant = instru.Vout / 40000 + 25000; //5nV=>usercode
-    DACOutCode = Usercode_Correction_to_DAC(instru.VoutGainLv, instru.VoltConstant);
-    DAC_outputV(DACOutCode);
-
-    return;
-}
-
-static void vscan_volt_out(void)
-{
-    void *wm = wm_get();
-    uint16_t DACOutCode;
-    int32_t DeltaVout;
-    int32_t Vin;
-
-    Vin = MEAS_VIN(wm) * 200;//[5nV]
-
-    if (DACReset) {
-        instru.Vout = Vset + Vin;
-    } else {
-        DeltaVout = Vset - (instru.Vout - Vin);
-        instru.Vout = instru.Vout + DeltaVout;
-    }
-
-    instru.VoltConstant = instru.Vout / 40000 + 25000;//5nV=>usercode
-    DACOutCode = Usercode_Correction_to_DAC(instru.VoutGainLv, instru.VoltConstant);
-    DAC_outputV(DACOutCode);
-
-    return;
-}
-
-static void CalcuResistance()
-{
-    /* Elite 100000 = 100R
-       Elite 1000000 = 1KR
-       Elite 10000000 = 10KR
-       Elite 100000000 = 100KR
-       Elite 1000000000 = 1MR
-     */
-
-    struct wm_rt_ctx_t *rt = (struct wm_rt_ctx_t *)wm_get();
-    struct wm_meas_t *m = &rt->measure;
-    int64_t resist;
-    int64_t volt = instru.Vout / 200; // [uV]
-    int64_t current = (int64_t)(m->_measureCurrent);
-
-    resist = volt * 1000000 / current; //R = V / Iin; [mOhm]
-    InputNotify(NOTIFY_IMPEDANCE, resist);
-}
-
-static void DACenable(uint8_t afterRead){
-    void *wm = wm_get();
-
-    if (afterRead == AFTER_READ_I) {
-        switch (instru.eliteFxn) {
-            case CURVE_CC:
-                cc_vscan();
-                volt_out();
-                break;
-
-            case CURVE_UNI_PULSE:
-                volt_out();
-                break;
-
-            default:
-                break;
-        }
-    } else if (afterRead == AFTER_READ_V) {
-        switch (instru.eliteFxn) {
-            case CURVE_IV_CY:
-            case CURVE_IV:
-            case CURVE_IT:
-            case CURVE_VO:
-                volt_out();
-                break;
-
-            case CURVE_RT:
-                volt_out();
-                CalcuResistance();
-                break;
-
-            case CURVE_CV:
-            case CURVE_CA:
-            case CURVE_LSV:
-            case CURVE_DPV:
-            case CURVE_DPV_SMPRATE:
-            case CURVE_DPV_ADVANCE:
-            case CURVE_DPV_ADVANCE_SMPRATE:
-                vscan_volt_out();
-                break;
-
-            default:{
-                break;
-            }
-        }
-    }
-}
-
-/*
- * define how long damping time for manual current stalls, to skip damping time
- * any level switch to 0 level has 80ms damping time
- * any level switch to 1 level has 20ms damping time
- * any level switch to 2 level has 10ms damping time
- * any level switch to 3 level has 10ms damping time
- */
-#define CNT_TO_I_GAIN_3M_IIN_VIN_VOUT_PLOT      7   // 7 * 12ms = 84ms
-#define CNT_TO_I_GAIN_100K_IIN_VIN_VOUT_PLOT    2   // 2 * 12ms = 24ms
-#define CNT_TO_I_GAIN_3K_IIN_VIN_VOUT_PLOT      1   // 1 * 12ms = 12ms
-#define CNT_TO_I_GAIN_100R_IIN_VIN_VOUT_PLOT    1   // 1 * 12ms = 12ms
-
-#define CNT_TO_I_GAIN_3M_IIN_VIN_PLOT           10  // 10 * 8ms = 80ms
-#define CNT_TO_I_GAIN_100K_IIN_VIN_PLOT         3   // 3 * 8ms = 24ms
-#define CNT_TO_I_GAIN_3K_IIN_VIN_PLOT           2   // 2 * 8ms = 16ms
-#define CNT_TO_I_GAIN_100R_IIN_VIN_PLOT         2   // 2 * 8ms = 16ms
-
-#define CNT_TO_I_GAIN_3M_IT_PLOT                20  // 20 * 4ms = 80ms
-#define CNT_TO_I_GAIN_100K_IT_PLOT              5   // 5 * 4ms = 20ms
-#define CNT_TO_I_GAIN_3K_IT_PLOT                3   // 3 * 4ms = 12ms
-#define CNT_TO_I_GAIN_100R_IT_PLOT              3   // 3 * 4ms = 12ms
-
-static void read_Iin_change_gain(uint16_t plot_type)
-{
-    /*  read Iin and cali value save as MEAS_CURR(wm)
-     *  if auto gain:
-     *      do NOT record the Iin after changing gain, time is according to damping time
-     *  if static gain:
-     *      change gain if gain is different from last gain
-     */
-    uint16_t plot = plot_type;
-    static uint16_t no_rec_time = 0;
-    static uint8_t cnt = 0;
-    void *wm = wm_get();
-
-    if (instru.IinADCAutoGainEn > 1)
-        return;
-
-    read_adc_raw_data(RIS_ADC_IIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-    MEAS_CURR(wm) = DecodeADCValue(instru.IinADCGainLv, RIS_ADC_IIN, spi_ADC_rxbuf);
-
-    if (instru.IinADCAutoGainEn) {
-        AutoGainChangeIin(MEAS_CURR(wm), plot, &no_rec_time);
-
-    } else {
-        if (lastIinADCGainLevel != instru.IinADCGainLv) {
-            IinADCGainCtrl(instru.IinADCGainLv);
-
-            if (plot_type == IT_PLOT) {
-                if (instru.IinADCGainLv == I_GAIN_3K) {
-                    no_rec_time = CNT_TO_I_GAIN_3K_IT_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_100K) {
-                    no_rec_time = CNT_TO_I_GAIN_100K_IT_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_3M) {
-                    no_rec_time = CNT_TO_I_GAIN_3M_IT_PLOT;
-                } else {
-                    no_rec_time = CNT_TO_I_GAIN_100R_IT_PLOT;
-                }
-            }
-
-            if (plot_type == IIN_VIN_PLOT) {
-                if (instru.IinADCGainLv == I_GAIN_3K) {
-                    no_rec_time = CNT_TO_I_GAIN_3K_IIN_VIN_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_100K) {
-                    no_rec_time = CNT_TO_I_GAIN_100K_IIN_VIN_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_3M) {
-                    no_rec_time = CNT_TO_I_GAIN_3M_IIN_VIN_PLOT;
-                } else {
-                    no_rec_time = CNT_TO_I_GAIN_100R_IIN_VIN_PLOT;
-                }
-            }
-
-            if (plot_type == IIN_VIN_VOUT_PLOT) {
-                if (instru.IinADCGainLv == I_GAIN_3K) {
-                    no_rec_time = CNT_TO_I_GAIN_3K_IIN_VIN_VOUT_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_100K) {
-                    no_rec_time = CNT_TO_I_GAIN_100K_IIN_VIN_VOUT_PLOT;
-                } else if (instru.IinADCGainLv == I_GAIN_3M) {
-                    no_rec_time = CNT_TO_I_GAIN_3M_IIN_VIN_VOUT_PLOT;
-                } else {
-                    no_rec_time = CNT_TO_I_GAIN_100R_IIN_VIN_VOUT_PLOT;
-                }
-            }
-        }
-    }
-
-    if (curr_rec_en == false) {
-        cnt++;
-    }
-
-    if (cnt >= no_rec_time) {
-        curr_rec_en = true;
-        cnt = 0;
-    }
-
-    return;
-}
-
-static void read_Vin_change_gain(void)
-{
-    static uint8_t rec_cnt = 0;
-    void *wm = wm_get();
-
-    if (instru.IinADCAutoGainEn > 1)
-        return;
-
-    /* read Vin and do NOT record the Vin after changing gain twice */
-    read_adc_raw_data(RIS_ADC_VIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-    MEAS_VIN(wm) = DecodeADCValue(instru.VinADCGainLv, RIS_ADC_VIN, spi_ADC_rxbuf);
-    if (instru.VinADCAutoGainEn) {
-        AutoGainChangeVin(MEAS_VIN(wm));
-    } else {
-        if (lastVinADCGainLv != instru.VinADCGainLv) {
-            VinADCGainCtrl(instru.VinADCGainLv);
-        }
-    }
-
-    if (volt_rec_en == false) {
-        rec_cnt++;
-    }
-
-    if (rec_cnt == 2) {
-        volt_rec_en = true;
-        rec_cnt = 0;
-    }
-
-    return;
-}
-
-static void read_Vout_change_gain(void)
-{
-    static uint8_t rec_cnt = 0;
-    void *wm = wm_get();
-
-    /* read Vout and do NOT record the Vout after changing gain twice */
-    read_adc_raw_data(RIS_ADC_VOUT, spi_ADC_rxbuf, spi_ADC_txbuf);
-    MEAS_VOUT(wm) = DecodeADCValue(0, RIS_ADC_VOUT, spi_ADC_rxbuf);
-
-    if (volt_rec_en == false) {
-        rec_cnt++;
-    }
-
-    if (rec_cnt == 2) {
-        volt_rec_en = true;
-        rec_cnt = 0;
-    }
-
-    return;
-}
-
-void EliteCalcAvg(uint32_t time)
-{
-    struct wm_uni_pulse_ctx_t *p = (struct wm_uni_pulse_ctx_t *)wm_get();
-    struct wm_meas_t *meas = &p->measure;
-    static uint32_t cnt = 0;
-    static int64_t curr_sum = 0;
-    int64_t curr_avg = 0;
-    uint32_t m;
-    uint32_t t = time;
-
-    m = t % p->_t_period;
-
-    if (calc_avg_en) {
-        cnt++;
-        curr_sum = curr_sum + meas->_measureCurrent;
-
-    } else {
-        curr_avg = curr_sum / cnt;
-        if (cnt == 0) {
-
-            return;
-        }
-
-        if (m < p->_t_pa[0]) {
-            InputNotify(NOTIFY_CURRENT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[1]) {
-            InputNotify(NOTIFY_VOLT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[2]) {
-
-        } else if (m < p->_t_pa[3]) {
-
-        }
-
-        cnt = 0;
-        curr_sum = 0;
-        curr_avg = 0;
-    }
-
-
-    return;
-}
-
-void dpv_EliteCalcAvg(uint32_t time)
-{
-    struct wm_dpv_ctx_t *p = (struct wm_dpv_ctx_t *)wm_get();
-    struct wm_meas_t *meas = &p->measure;
-    static uint32_t cnt = 0;
-    static int64_t curr_sum = 0;
-    int64_t curr_avg = 0;
-    uint32_t m;
-    uint32_t t = time;
-
-    m = t % p->_t_period;
-    static bool first_v_rec = true;
-
-    if (calc_avg_en) {
-        cnt++;
-        curr_sum = curr_sum + meas->_measureCurrent;
-        if (first_v_rec) {
-            InputNotify(NOTIFY_VOLT, instru.Vout/200 - meas->_measureVin);
-            InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            first_v_rec = false;
-        }
-
-    } else {
-        first_v_rec = true;
-        curr_avg = curr_sum / cnt;
-        if (cnt == 0) {
-
-            return;
-        }
-
-        if (m < p->_t_pa[0]) {
-            InputNotify(NOTIFY_CURRENT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[1]) {
-            InputNotify(NOTIFY_CURRENT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[2]) {
-
-        } else if (m < p->_t_pa[3]) {
-
-        }
-
-        cnt = 0;
-        curr_sum = 0;
-        curr_avg = 0;
-    }
-
-
-    return;
-}
-
-void dpv_advance_EliteCalcAvg(uint32_t time)
-{
-    struct wm_dpv_advance_ctx_t *p = (struct wm_dpv_advance_ctx_t *)wm_get();
-    struct wm_meas_t *meas = &p->measure;
-    static uint32_t cnt = 0;
-    static int64_t curr_sum = 0;
-    int64_t curr_avg = 0;
-    uint32_t m;
-    uint32_t t = time;
-
-    m = t % p->_t_period;
-    static bool first_v_rec = true;
-
-    if (calc_avg_en) {
-        cnt++;
-        curr_sum = curr_sum + meas->_measureCurrent;
-        if (first_v_rec) {
-            InputNotify(NOTIFY_VOLT, instru.Vout/200 - meas->_measureVin);
-            InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            first_v_rec = false;
-        }
-
-    } else {
-        first_v_rec = true;
-        curr_avg = curr_sum / cnt;
-        if (cnt == 0) {
-
-            return;
-        }
-
-        if (m < p->_t_pa[0]) {
-            InputNotify(NOTIFY_CURRENT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[1]) {
-            InputNotify(NOTIFY_CURRENT, curr_avg);
-            SendNotify();
-
-        } else if (m < p->_t_pa[2]) {
-
-        } else if (m < p->_t_pa[3]) {
-
-        }
-
-        cnt = 0;
-        curr_sum = 0;
-        curr_avg = 0;
-    }
-
-
-    return;
-}
-
-static void Iin_Vin_Vout_Plot(uint32_t time)
-{
-    static uint8_t ADC_cnt = 0;
-    void *wm = wm_get();
-    uint32_t t = time;
-    bool read_adc_flag = false;
-
-    /* the time for measuring battery */
-    if (batteryCheck_flag && tempCheck_flag) {
-        read_adc_flag = EliteADCBattery();
-        if (!read_adc_flag) {
-             read_adc_raw_data(RIS_ADC_IIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-            ADC_cnt = 5;
-        }
-
-        return;
-    }
-
-    /* the time for Not measuring battery */
-    /* ADC_cnt:  0 - read Iin and do NOT buffer the Iin after changing gain twice,
-     *               and output DAC, and read Vin, and increase ADC_cnt
-     *           1 - read Vin and increase ADC_cnt
-     *           2 - read Vin and do NOT buffer the Vin after changing gain twice,
-     *               and output DAC, and read Vout, and increase ADC_cnt
-     *           3 - read Vout and increase ADC_cnt
-     *           4 - read Vout and do NOT buffer the Vout after changing gain twice,
-     *               and output DAC, and read Iin, and increase ADC_cnt
-     *           5 - read Iin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        read_Iin_change_gain(IIN_VIN_VOUT_PLOT);
-
-        if (instru.eliteFxn == CURVE_DPV && vscanReset == false) {
-            dpv_EliteCalcAvg(t);
-        }
-        else if (instru.eliteFxn == CURVE_DPV_ADVANCE && vscanReset == false) {
-            dpv_advance_EliteCalcAvg(t);
-        }
-
-        DACenable(AFTER_READ_I);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 1) {
-        read_adc_raw_data(RIS_ADC_VIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 2) {
-        read_Vin_change_gain();
-        DACenable(AFTER_READ_V);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 3) {
-        read_adc_raw_data(RIS_ADC_VOUT, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 4) {
-        read_Vout_change_gain();
-        DACenable(AFTER_READ_V);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 5) {
-        read_adc_raw_data(RIS_ADC_IIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt = 0;
-    }
-
-    return;
-}
-
-static void Iin_Vin_Plot(void)
-{
-    static uint8_t ADC_cnt = 0;
-    void *wm = wm_get();
-    bool read_adc_flag = false;
-
-    /* the time for measuring battery */
-    if (batteryCheck_flag && tempCheck_flag) {
-        read_adc_flag = EliteADCBattery();
-        if (!read_adc_flag) {
-            read_adc_raw_data(RIS_ADC_IIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-            ADC_cnt = 3;
-        }
-
-        return;
-    }
-
-    /* the time for Not measuring battery */
-    /* ADC_cnt:  0 - read Iin and do NOT buffer the Iin after changing gain twice,
-     *               and output DAC, and read Vin, and increase ADC_cnt
-     *           1 - read Vin and increase ADC_cnt
-     *           2 - read Vin and do NOT buffer the Vin after changing gain twice,
-     *               and output DAC, and read Iin, and increase ADC_cnt
-     *           3 - read Iin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        read_Iin_change_gain(IIN_VIN_PLOT);
-        DACenable(AFTER_READ_I);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 1) {
-        read_adc_raw_data(RIS_ADC_VIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 2) {
-        read_Vin_change_gain();
-        DACenable(AFTER_READ_V);
-        ADC_cnt++;
-
-    } else if (ADC_cnt == 3) {
-        read_adc_raw_data(RIS_ADC_IIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt = 0;
-    }
-
-    return;
-}
-
-static void IT_Plot(uint32_t time)
-{
-    static uint8_t ADC_cnt = 0;
-    void *wm = wm_get();
-    uint32_t t = time;
-    bool read_adc_flag = false;
-
-    /* measure battery if needs */
-    batteryCheck_flag = false;
-    tempCheck_flag = false;
-
-    if (batteryCheck_flag || tempCheck_flag) {
-        read_adc_flag = EliteADCBattery();
-        if (!read_adc_flag) {
-            read_adc_raw_data(RIS_ADC_IIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-            ADC_cnt = 1;
-        }
-
-        return;
-    }
-
-    /* ADC_cnt:  0 - read Iin and do NOT buffer the Iin after changing gain twice, read Iin and increase ADC_cnt
-     *           1 - read Iin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        read_adc_raw_data(RIS_ADC_IIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        read_Iin_change_gain(IT_PLOT);
-
-        if (instru.eliteFxn == CURVE_UNI_PULSE && vscanReset == false) {
-            EliteCalcAvg(t);
-        }
-
-        DACenable(AFTER_READ_I);
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-
-}
-
-static void VT_Plot(void)
-{
-    static uint8_t ADC_cnt = 0;
-    void *wm = wm_get();
-
-    /* measure battery if needs */
-    if (batteryCheck_flag && tempCheck_flag) {
-        EliteADCBattery();
-        if (!batteryCheck_flag) {
-            read_adc_raw_data(RIS_ADC_VIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-            ADC_cnt = 1;
-        }
-
-        return;
-    }
-
-    /* ADC_cnt:  0 - read Vin and do NOT buffer the Vin after changing gain twice, read Vin and increase ADC_cnt
-     *           1 - read Vin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        read_adc_raw_data(RIS_ADC_VIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        read_Vin_change_gain();
-        DACenable(AFTER_READ_V);
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-}
-
-static void Vout_Plot(void)
-{
-    static uint8_t ADC_cnt = 0;
-    void *wm = wm_get();
-
-    /* measure battery if needs */
-    if (batteryCheck_flag && tempCheck_flag) {
-        EliteADCBattery();
-        if (!batteryCheck_flag) {
-            read_adc_raw_data(RIS_ADC_VOUT, spi_ADC_rxbuf, spi_ADC_txbuf);
-            ADC_cnt = 1;
-        }
-
-        return;
-    }
-
-    /* ADC_cnt:  0 - read Vout and do NOT buffer the Vout after changing gain twice, read Vout and increase ADC_cnt
-     *           1 - read Vout and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        read_adc_raw_data(RIS_ADC_VOUT, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        read_Vout_change_gain();
-        DACenable(AFTER_READ_V);
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-}
-
-static void cali_IT_plot(void) {
-    void *wm = wm_get();
-
-    static int32_t ADCValueSUM = 0;
-    static uint16_t cali_count = 0;
-    static uint8_t ADC_cnt = 0;
-    static uint8_t rec_cnt = 0;
-    static uint16_t cali_count_max = 1000;
-    int32_t ADCValueAVG = 0;
-
-    /* ADC_cnt:  0 - read Iin and do NOT buffer the Iin after changing gain twice
-     *           1 - read Iin and increase ADC_cnt
-     *           2 - read Iin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        if (instru.IinADCAutoGainEn) {
-            MEAS_CURR(wm) = 0xFFFF;
-        } else {
-            read_adc_raw_data(RIS_ADC_IIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-            MEAS_CURR(wm) = (int32_t) (spi_ADC_rxbuf[0] << 8) | (int32_t) (spi_ADC_rxbuf[1]);
-            if (lastIinADCGainLevel != instru.IinADCGainLv) {
-                IinADCGainCtrl(instru.IinADCGainLv);
-            }
-        }
-
-        if (instru.IinADCGainLv == 0) {
-            cali_count_max = 5000;
-        } else {
-            cali_count_max = 1000;
-        }
-
-        if (curr_rec_en == false) {
-            rec_cnt++;
-        } else {
-            if (cali_count >= cali_count_max) {
-                ADCValueAVG = ADCValueSUM / cali_count;
-
-                InputNotify(NOTIFY_CURRENT, ADCValueAVG);
-                SendNotify();
-
-                uint8_t CIS_buf[9]   = {0};
-                CIS_buf[0] = 5; //data len
-                CIS_buf[1] = instru.chip_id;
-                CIS_buf[2] = (uint8_t) ((ADCValueAVG & 0xFF00) >> 8);
-                CIS_buf[3] = (uint8_t) (ADCValueAVG & 0x00FF);
-                CIS_buf[4] = 0x00;
-                CIS_buf[5] = instru.IinADCGainLv;
-                SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, 9, CIS_buf);
-
-                PeriodicEvent = false;
-                ADCValueSUM = 0;
-                cali_count = 0;
-                ModeLED(NO_EVENT);
-            } else {
-                cali_count++;
-                ADCValueSUM = ADCValueSUM + MEAS_CURR(wm);
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-                InputNotify(NOTIFY_VOLT, ADCValueSUM);
-                InputNotify(NOTIFY_IMPEDANCE, (int32_t)cali_count);
-            }
-        }
-
-        if (rec_cnt == 2) {
-            curr_rec_en = true;
-            rec_cnt = 0;
-        }
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        read_adc_raw_data(RIS_ADC_IIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 2) {
-        read_adc_raw_data(RIS_ADC_IIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-}
-
-static void cali_VT_plot(void) {
-    void *wm = wm_get();
-
-    static int32_t ADCValueSUM = 0;
-    static uint16_t cali_count = 0;
-    static uint8_t ADC_cnt = 0;
-    static uint8_t rec_cnt = 0;
-    uint16_t cali_count_max = 0;
-    int32_t ADCValueAVG = 0;
-
-    /* ADC_cnt:  0 - read Vin and do NOT buffer the Vin after changing gain twice
-     *           1 - read Vin and increase ADC_cnt
-     *           2 - read Vin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-        if (instru.VinADCAutoGainEn) {
-            MEAS_VIN(wm) = 0xFFFF;
-        } else {
-            read_adc_raw_data(RIS_ADC_VIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-            MEAS_VIN(wm) = (int32_t) (spi_ADC_rxbuf[0] << 8) | (int32_t) (spi_ADC_rxbuf[1]);
-            if (lastVinADCGainLv != instru.VinADCGainLv) VinADCGainCtrl(instru.VinADCGainLv);
-        }
-
-        if (instru.VinADCGainLv == 0) {
-            cali_count_max = 5000;
-        } else {
-            cali_count_max = 1000;
-        }
-
-        if (volt_rec_en == false) {
-           rec_cnt++;
-        } else {
-            if (cali_count >= cali_count_max) {
-                ADCValueAVG = ADCValueSUM / cali_count;
-
-                InputNotify(NOTIFY_VOLT, ADCValueAVG);
-                SendNotify();
-
-                uint8_t CIS_buf[9]   = {0};
-                CIS_buf[0] = 5; //data len
-                CIS_buf[1] = instru.chip_id;
-                CIS_buf[2] = (uint8_t) ((ADCValueAVG & 0xFF00) >> 8);
-                CIS_buf[3] = (uint8_t) (ADCValueAVG & 0x00FF);
-                CIS_buf[4] = 0x00;
-                CIS_buf[5] = instru.VinADCGainLv;
-                SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, 9, CIS_buf);
-
-                PeriodicEvent = false;
-                ADCValueSUM = 0;
-                cali_count = 0;
-                ModeLED(NO_EVENT);
-            } else {
-                cali_count++;
-                ADCValueSUM = ADCValueSUM + MEAS_VIN(wm);
-                InputNotify(NOTIFY_VOLT, MEAS_VIN(wm));
-                InputNotify(NOTIFY_CURRENT, ADCValueSUM);
-                InputNotify(NOTIFY_IMPEDANCE, (int32_t)cali_count);
-            }
-        }
-
-        if (rec_cnt == 2) {
-            volt_rec_en = true;
-            rec_cnt = 0;
-        }
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        read_adc_raw_data(RIS_ADC_VIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 2) {
-        read_adc_raw_data(RIS_ADC_VIN, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-}
-static void cali_Vout_plot(void) {
-    void *wm = wm_get();
-
-    static int32_t ADCValueSUM = 0;
-    static uint16_t cali_count = 0;
-    static uint8_t ADC_cnt = 0;
-    static uint8_t rec_cnt = 0;
-    uint16_t cali_count_max = 1000;
-    int32_t ADCValueAVG = 0;
-
-    /* ADC_cnt:  0 - read Vin and do NOT buffer the Vin after changing gain twice
-     *           1 - read Vin and increase ADC_cnt
-     *           2 - read Vin and reset ADC_cnt
-     */
-    if (ADC_cnt == 0) {
-
-        read_adc_raw_data(RIS_ADC_VOUT, spi_ADC_rxbuf, spi_ADC_txbuf);
-        MEAS_VOUT(wm) = (int32_t) (spi_ADC_rxbuf[0] << 8) | (int32_t) (spi_ADC_rxbuf[1]);
-
-        if (volt_rec_en == false) {
-           rec_cnt++;
-        } else {
-            if (cali_count >= cali_count_max) {
-                ADCValueAVG = ADCValueSUM / cali_count;
-
-                InputNotify(NOTIFY_VOLT, ADCValueAVG);
-                SendNotify();
-
-                uint8_t CIS_buf[9]   = {0};
-                CIS_buf[0] = 5; //data len
-                CIS_buf[1] = instru.chip_id;
-                CIS_buf[2] = (uint8_t) ((ADCValueAVG & 0xFF00) >> 8);
-                CIS_buf[3] = (uint8_t) (ADCValueAVG & 0x00FF);
-                CIS_buf[4] = 0x00;
-                CIS_buf[5] = instru.VinADCGainLv;
-                SimpleProfile_SetParameter(BLE_CIS_BUFF_CHAR, 9, CIS_buf);
-
-                PeriodicEvent = false;
-                ADCValueSUM = 0;
-                cali_count = 0;
-                ModeLED(NO_EVENT);
-            } else {
-                cali_count++;
-                ADCValueSUM = ADCValueSUM + MEAS_VOUT(wm);
-                InputNotify(NOTIFY_VOLT, MEAS_VOUT(wm));
-                InputNotify(NOTIFY_CURRENT, ADCValueSUM);
-                InputNotify(NOTIFY_IMPEDANCE, (int32_t)cali_count);
-            }
-        }
-
-        if (rec_cnt == 2) {
-            volt_rec_en = true;
-            rec_cnt = 0;
-        }
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 1) {
-        read_adc_raw_data(RIS_ADC_VOUT, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt++;
-
-        return;
-    }
-
-    if (ADC_cnt == 2) {
-        read_adc_raw_data(RIS_ADC_VOUT, spi_ADC_rxbuf, spi_ADC_txbuf);
-        ADC_cnt = 0;
-
-        return;
-    }
-
-    return;
-}
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_power.h

@@ -1,9 +0,0 @@
-#ifndef HEADSTAGE_POWER_H
-#define HEADSTAGE_POWER_H
-
-#include <ti/drivers/Power.h>
-#include <ti/drivers/power/PowerCC26XX.h>
-
-#define headstage_power_shutdown() Power_shutdown(NULL, 0)
-
-#endif // HEADSTAGE_POWER_H

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/Elite_version.h

@@ -1,15 +0,0 @@
-
-#ifndef VERSION_DATE
-#define VERSION_DATE
-
-#define VERSION_DATE_YEAR      22
-#define VERSION_DATE_MONTH     4
-#define VERSION_DATE_DAY       13
-#define VERSION_DATE_HOUR      14
-#define VERSION_DATE_MINUTE    16
-
-// this is NOT the version hash !!
-// it's the last version hash
-#define VERSION_HASH           8808490caa465cc94d14896de28763a5e5c4672b
-#define VERSION_GIT_BRANCH     Elite_OBJ_0.2mv
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/headstage_tni.h

@@ -1,311 +0,0 @@
-
-#ifndef HEADSTAGE_H
-#error "headstage.h not include"
-#endif
-
-#ifdef HEADSTAGE_H_H
-#error "headstage_*.h has be included"
-#endif
-
-#ifndef HEADSTAGE_TNI_H
-#define HEADSTAGE_H_H
-#define HEADSTAGE_TNI_H
-
-// product information
-#define DEVICE_NAME "Elite-v0.1"
-#define MAJOR_PRODUCT_NUMBER 0
-#define MINOR_PRODUCT_NUMBER 1
-#define MAJOR_VERSION_NUMBER 0
-#define MINOR_VERSION_NUMBER 1
-
-// header
-#include <ti/drivers/PIN.h>
-#include "board.h"
-
-/*============
- ==== SPI ====
- ===========*/
-
-/* application use SPI parameters and buffers */
-
-#define SPI_BUFFER_SIZE 16
-
-/**
-* the pointer to point which channel is used currently.
-* -1 for not beginning.
-*/
-static int8    channel_pointer            = -1;
-
-static uint8_t spi_txbuf[SPI_BUFFER_SIZE] = {0};
-static uint8_t spi_rxbuf[SPI_BUFFER_SIZE] = {0};
-
-/*=============================
- ==== headstage variable ====
- ============================*/
-
-PIN_Handle       pin_handle;
-static PIN_State DBS_rst;
-
-// DBS reset pin
-
-const PIN_Config BLE_IO[] = {
-    //
-    IOID_9 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    IOID_2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    IOID_3 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    IOID_13 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
-    PIN_TERMINATE  //
-};
-
-/**
- * ADC clock switch signal.
- */
-static bool adc_clock_signal = FALSE;
-
-/*=======================================
- ==== headstage function declaration ====
- ======================================*/
-
-static void headstage_tni_update_instruction_callback(uint8_t ins_type, uint8_t ins_op, uint8_t ins_len, uint8_t *ins);
-
-/*=============================
- ==== ramp data generating ====
- ============================*/
-
-static uint16_t ramp_data_counter = 0;
-
-static void create_ramp(uint8_t *buff) {
-    buff[0] = 0b10110000 | (0b00001111 & (uint8_t)(ramp_data_counter >> 6));
-    buff[1] = (uint8_t)(ramp_data_counter << 2);
-    ramp_data_counter += 1;
-}
-
-/*=======================================
- ==== headstage function implemented ====
- ======================================*/
-
-/**
- * change channel value to little endian
- */
-static uint8 encode_channel(uint8 channel) {
-    return 0x0F & (((channel & 0b1000) >> 3) |  //
-                   ((channel & 0b0100) >> 1) |  //
-                   ((channel & 0b0010) << 1) |  //
-                   ((channel & 0b0001) << 3));
-}
-
-static void headstage_init() {
-    set_update_instruction_callback(headstage_tni_update_instruction_callback);
-
-    // initialize the DBS reset pin
-    pin_handle = PIN_open(&DBS_rst, BLE_IO);
-    PIN_setOutputValue(pin_handle, IOID_9, 1);
-    PIN_setOutputValue(pin_handle, IOID_2, 0);
-    PIN_setOutputValue(pin_handle, IOID_3, 0);
-}
-
-/**
- * change the recording clock bit in the instruction buffer.
- */
-static void update_ins_rec_clock(uint8_t *buf, bool adc_clock_signal) {
-    buf[3] = (buf[3] & 0b11110000) | ((adc_clock_signal) ? 0b1000 : 0);
-}
-
-/**
- * change the recording channel bit in the instruction buffer.
- */
-static void update_ins_rec_channel(uint8_t *buf, uint8 channel) {
-    buf[1] = (buf[1] & 0b00001111) | (encode_channel(channel) << 4);
-}
-
-/**
- * change the stimulation enable bit in the instruction buffer.
- */
-static void update_ins_sti_enable(uint8_t *buf, bool enable) {
-    buf[1] = (buf[1] & 0b11111101) | ((enable) ? 0b10 : 0);
-}
-
-/**
- * change the stimulating channel bit in the instruction buffer.
- */
-static void update_ins_sti_channel(uint8_t *buf, uint8 sti_chp, uint8 sti_chn) {
-    buf[2] = (buf[2] & 0b11110000) | encode_channel(sti_chp);
-    buf[3] = (buf[3] & 0b00001111) | (encode_channel(sti_chn) << 4);
-}
-
-static void update_ins_buffer() {
-    uint8 header      = 0b10100000;
-    uint8 amp_gain    = (instru.amp_gain & 0b11) << 3;
-    uint8 amp_lbf     = instru.amp_low_band_freq & 0b111;
-    uint8 channel     = 0;  // should be call update_ins_channel to modify this value
-    uint8 chopper     = (instru.chopper) ? 0b00001000 : 0;
-    uint8 fast_settle = (instru.fast_settle) ? 0b00000100 : 0;
-    uint8 sti_enable  = (instru.work_mode != STI_MODE_DISABLE) ? 0b00000010 : 0;
-    uint8 sti_volt_l  = (instru.sti_volt & 0b11111) >> 4;
-    uint8 sti_volt_h  = (instru.sti_volt & 0b01111) << 4;
-    uint8 sti_chp     = instru.sti_channel_pmos & 0b1111;
-    uint8 sti_chn     = (instru.sti_channel_nmos & 0b1111) << 4;
-    uint8 clk_signal  = 0;  // should be call update_ins_clock to modify this value
-
-    spi_txbuf[0] = header | amp_gain | amp_lbf;
-    spi_txbuf[1] = channel | chopper | fast_settle | sti_enable | sti_volt_l;
-    spi_txbuf[2] = sti_volt_h | sti_chp;
-    spi_txbuf[3] = sti_chn | clk_signal;
-}
-
-static bool update_ins_rec_buffer() {
-    adc_clock_signal = (adc_clock_signal) ? FALSE : TRUE;  // switch adc_clock
-    update_ins_rec_clock(spi_txbuf, adc_clock_signal);
-
-    if (adc_clock_signal) {
-        // change to next channel
-
-        if (next_active_channel()) {
-            update_ins_rec_channel(spi_txbuf, channel_pointer);
-        } else {
-            // no channel active
-            return false;
-        }
-    }
-
-    return true;
-}
-
-/**
- * Change the instruction content for SPI buffer, which is depended on the
- * work_mode. Expend the remind instruction according to the base instruction
- * which allocated at the beginning 4 bytes of the SPI buffer.
- *
- * ========= ===========
- * work_mode ins pattern
- * ========= ===========
- * POS, NEG  4 F  D 0
- * P2N, N2P  4 4' F D
- * AWF       not impl
- * ========= ===========
- *
- * pattern *4*
- *     stimulation instruction.
- *
- * pattern *F*
- *     set pmos channel to 0xF, release the remain voltage in the capacitance.
- *
- * pattern *D*
- *     disable stimulation
- *
- * pattern *0*
- *     nop.
- *
- * @param: buf: pointer of the SPI buffer.
- */
-static void update_ins_sti_buffer() {
-    switch (instru.work_mode) {
-    case STI_MODE_POS:
-    case STI_MODE_NEG:
-        // copy [4:7]
-        spi_txbuf[4] = spi_txbuf[0];
-        spi_txbuf[5] = spi_txbuf[1];
-        spi_txbuf[6] = spi_txbuf[2];
-        spi_txbuf[7] = spi_txbuf[3];
-        // copy [8:B]
-        spi_txbuf[8]  = spi_txbuf[0];
-        spi_txbuf[9]  = spi_txbuf[1];
-        spi_txbuf[10] = spi_txbuf[2];
-        spi_txbuf[11] = spi_txbuf[3];
-        // reset [C:F]
-        spi_txbuf[12] = 0;
-        spi_txbuf[13] = 0;
-        spi_txbuf[14] = 0;
-        spi_txbuf[15] = 0;
-        // change content
-        update_ins_sti_enable(spi_txbuf, TRUE);
-        // ins buf [4:7]
-        update_ins_sti_enable(spi_txbuf + 4, TRUE);
-        update_ins_sti_channel(spi_txbuf + 4, 0xF, instru.sti_channel_pmos);
-        // ins buf [8:B]
-        update_ins_sti_enable(spi_txbuf + 8, FALSE);
-        break;
-    case STI_MODE_P2N:
-    case STI_MODE_N2P:
-        // copy [4:7]
-        spi_txbuf[4] = spi_txbuf[0];
-        spi_txbuf[5] = spi_txbuf[1];
-        spi_txbuf[6] = spi_txbuf[2];
-        spi_txbuf[7] = spi_txbuf[3];
-        // copy [8:B]
-        spi_txbuf[8]  = spi_txbuf[0];
-        spi_txbuf[9]  = spi_txbuf[1];
-        spi_txbuf[10] = spi_txbuf[2];
-        spi_txbuf[11] = spi_txbuf[3];
-        // copy [C:F]
-        spi_txbuf[12] = spi_txbuf[0];
-        spi_txbuf[13] = spi_txbuf[1];
-        spi_txbuf[14] = spi_txbuf[2];
-        spi_txbuf[15] = spi_txbuf[3];
-        // change content
-        update_ins_sti_enable(spi_txbuf + 0, TRUE);
-        update_ins_sti_channel(spi_txbuf + 0, instru.sti_channel_pmos, instru.sti_channel_nmos);
-        // ins buf [4:7]
-        update_ins_sti_enable(spi_txbuf + 4, TRUE);
-        update_ins_sti_channel(spi_txbuf + 4, instru.sti_channel_nmos, instru.sti_channel_pmos);
-        // ins buf [8:B]
-        update_ins_sti_enable(spi_txbuf + 8, TRUE);
-        update_ins_sti_channel(spi_txbuf + 8, 0xF, instru.sti_channel_nmos);
-        // ins buf [C:F]
-        update_ins_sti_enable(spi_txbuf + 12, FALSE);
-        break;
-    case STI_MODE_AWF:
-        // XXX define the voltage change
-        break;
-    default:
-        // do nothing
-        break;
-    }
-}
-
-static void headstage_tni_update_instruction_callback(uint8_t ins_type, uint8_t ins_op, uint8_t ins_len, uint8_t *ins) {
-    switch (ins_type) {
-    case INS_TYPE_VIS: {
-    // reset
-    case VIS_RST:
-        // reset. reset all variable
-        adc_clock_signal = FALSE;
-        memset(spi_txbuf, 0, SPI_BUFFER_SIZE);
-        break;
-
-    // interrupt
-    case VIS_INT:
-        // stop. reset channel table
-        ramp_data_counter = 0;
-        memset(spi_txbuf, 0, SPI_BUFFER_SIZE);
-        break;
-    }
-    case INS_TYPE_RIS:
-    default:
-        break;
-    }
-}
-
-static uint8_t *spi_transact_rec_instruction() {
-    if (IS_REC_MODE(instru.work_mode)) {
-        PIN_setOutputValue(pin_handle, IOID_13, 1);  // DBS_P2S turn on
-        headstage_spi_transaction(SPI_BUFFER_SIZE, spi_txbuf, spi_rxbuf);
-        PIN_setOutputValue(pin_handle, IOID_13, 0);  // DBS_P2S turn off
-
-    } else if (IS_ARM_MODE(instru.work_mode) && !adc_clock_signal) {
-        create_ramp(spi_rxbuf);
-    }
-
-    if (adc_clock_signal) {
-        return NULL;
-    } else {
-        return spi_rxbuf;
-    }
-}
-
-static uint8_t *spi_transact_sti_instruction() {
-    headstage_spi_transaction(16, spi_txbuf, NULL);
-    return NULL;
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/impedance_meter.h

@@ -1,853 +0,0 @@
-/*
- * impedance_meter.h
- *
- *  Created on: 2019/01/15
- *      Author: benny
- */
-#ifndef HEADSTAGE_H
-#error "headstage.h not include"
-#endif
-
-#ifdef HEADSTAGE_H_H
-#error "headstage_*.h has be included"
-#endif
-
-#ifndef IMPEDANCE_METER_H_
-#define HEADSTAGE_H_H
-#define IMPEDANCE_METER_H_
-
-// header
-#include <ti/drivers/PIN.h>
-#include "board.h"
-#include "EliteWorkData.h"
-#include <driverlib/aon_batmon.h>
-
-static void SimpleBLEPeripheral_performPeriodicTask(void);
-
-static void SimpleBLEPeripheral_clockHandler(UArg arg) {
-    // Store the event.
-//    events |= SBP_PERIODIC_EVT;
-
-    // Wake up the application.
-//    Semaphore_post(semaphore);  // send samaphore to jump out of infinite waiting(simple_peripheral.c line570)
-
-}
-static void elite_gptimer_callback(GPTimerCC26XX_Handle handle, GPTimerCC26XX_IntMask interruptMask) {
-    events |= SBP_PERIODIC_EVT;
-    Semaphore_post(semaphore);
-    GPT.GptimerCounter++;
-}
-
-
-static void ZM_update_instruction_callback(uint8_t ins_type, uint8_t chip_ID, uint8_t *ins);
-
-static void ZM_init() {
-    set_update_instruction_callback(ZM_update_instruction_callback);
-
-    // initialize
-    pin_handle = PIN_open(&ZM_rst, BLE_IO);
-    Init_Elite15_PIN();
-    ELITE15_SPI_HOLD();
-
-    PIN15_setOutputValue(shutdown_6994, 1);     // OFF = 1 => turn off 6994
-    PIN15_setOutputValue(enable_10v, 0);        // enable 10V
-    PIN15_setOutputValue(HIGH_Z_MODE, 0);       // HIGH Z MODE // 1: close; 0: open;
-
-    InitEliteInstruction();
-
-    // init DAC, set output ~= 0 V
-    instru.VoutGainLv = VOUT_GAIN_15K;
-    VoutGainControl(instru.VoutGainLv);
-    DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLv, 25000));
-
-    /* when elite open, must change vin level,
-    measure battery value will be right */
-    VinADCGainCtrl(VIN_GAIN_AUTO);
-
-    elite_gptimer_open();
-    elite_gptimer_start();
-
-    //    PIN_registerIntCb(pin_handle, switch_on_callback);
-    //    PIN_setInterrupt(pin_handle, switch_on | PIN_IRQ_POSEDGE);
-}
-
-static void ZM_update_instruction_callback(uint8_t ins_type, uint8_t chip_ID, uint8_t *ins) {}
-
-#define IsPeriodicMode() (                       \
-(instru.eliteFxn == CURVE_IV)                 || \
-(instru.eliteFxn == CURVE_IV_CY)              || \
-(instru.eliteFxn == CURVE_IT)                 || \
-(instru.eliteFxn == CURVE_VT)                 || \
-(instru.eliteFxn == CURVE_RT)                 || \
-(instru.eliteFxn == CURVE_CC)                 || \
-(instru.eliteFxn == CURVE_CV)                 || \
-(instru.eliteFxn == CURVE_LSV)                || \
-(instru.eliteFxn == CURVE_CA)                 || \
-(instru.eliteFxn == CURVE_VO)                 || \
-(instru.eliteFxn == CURVE_OCP)                || \
-(instru.eliteFxn == CURVE_CALI_ADC)              \
-)
-
-#define Ve1MatchVe2Mode() (                      \
-(instru.eliteFxn == CURVE_IV)                 || \
-(instru.eliteFxn == CURVE_IV_CY)              || \
-(instru.eliteFxn == CURVE_CV)                 || \
-(instru.eliteFxn == CURVE_LSV)                   \
-)
-
-static void pulse_mode(void)
-{
-     // Default working flow is vscan -> ADC read -> send notify
-     // We will need a flag to control vscan, ADC and notify
-
-     if(mode_init){
-        GPT.SampleRateCounter = instru.sampleRate - 10;
-        GPT.VscanRateCounter  = instru.VsetRate - 1;
-         mode_init       = false;
-         batteryADC_flag = false;
-         volt_rec_en     = true;
-         curr_rec_en     = true;
-         firstTimeReset  = true;
-         notifyFirst_flag = true;
-         //pulsemode variable
-         stiFirstTime  = true;
-         VinADCGainCtrl(instru.VinADCGainLv);
-         IinADCGainCtrl(instru.IinADCGainLv);
-         VoutGainControl(instru.VoutGainLv);
-         if (Ve1MatchVe2Mode()) {
-             if (instru.Ve1 == instru.Ve2) {
-                 DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLv, instru.Ve1));
-                 PeriodicEvent = false;
-                 PIN15_setOutputValue(HIGH_Z_MODE, 0); // 0: open highz;
-                 ModeLED(NO_EVENT);
-             }
-         } else if (instru.eliteFxn == CURVE_PULSE) {
-             if(!megaStiEnable){
-                  PeriodicEvent = false;
-                  PIN15_setOutputValue(HIGH_Z_MODE, 0); // 0: open highz;
-                  ModeLED(NO_EVENT);
-             }
-         }
-     }
-
-
-     GPT.LeadTimeCounter = GPT.LeadTimeCounter + GPT.DeltaGptimerCounter;
-     if(leadTimeReset && GPT.LeadTimeCounter <= 2000){
-         vscanReset = true;
-     }else{
-         if(notifyFirst_flag){
-             GPT.NotifyCounter = instru.notifyRate - 20;
-             notifyFirst_flag = false;
-         }
-         vscanReset = false;
-         leadTimeReset = false;
-     }
-
-    //vscan counter
-    GPT.VscanRateCounter = GPT.VscanRateCounter + GPT.DeltaGptimerCounter;
-    //pulse mode counter
-    GPT.StiCounter = GPT.StiCounter + GPT.DeltaGptimerCounter;
-    if (vscanReset) {
-        DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLv, 25000));
-        DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLv, 25000));
-        //vscanReset = false;
-    }else{
-        if (megaStiEnable) {
-            pulse_vscan();
-        }
-    }
-
-     //battery counter
-     GPT.BatteryADCCounter = GPT.BatteryADCCounter + GPT.DeltaGptimerCounter;
-     GPT.BatteryCheckCounter = GPT.BatteryCheckCounter + GPT.DeltaGptimerCounter;
-     if(GPT.BatteryCheckCounter >= 50000){
-         GPT.BatteryCheckCounter -= 50000; //To get right time
-         batteryCheck_flag = true;
-         tempCheck_flag = true;
-
-        if ((instru.eliteFxn == CURVE_IV) ||
-                (instru.eliteFxn == CURVE_IV_CY) ||
-                (instru.eliteFxn == CURVE_CC) ||
-                (instru.eliteFxn == CURVE_CV) ||
-                (instru.eliteFxn == CURVE_LSV) ||
-                (instru.eliteFxn == CURVE_CA) ||
-                (instru.eliteFxn == CURVE_OCP) ||
-                (instru.eliteFxn == CURVE_PULSE) ||
-                (instru.eliteFxn == CURVE_UNI_PULSE) ||
-                (instru.eliteFxn == CURVE_DPV) ||
-                (instru.eliteFxn == CURVE_DPV_SMPRATE) ||
-                (instru.eliteFxn == CURVE_DPV_ADVANCE) ||
-                (instru.eliteFxn == CURVE_DPV_ADVANCE_SMPRATE) ||
-                (instru.eliteFxn == CURVE_CALI_ADC)) {
-            batteryCheck_flag = false;
-            tempCheck_flag = false;
-
-        }
-     }
-
-     uint16_t bat = NotifyVoltBat;
-     if( bat < 768 && bat > 20){
-         PIN15_setOutputValue(enable_5v, 0);
-     }
-
-     //ADC counter
-     GPT.SampleRateCounter = GPT.SampleRateCounter + GPT.DeltaGptimerCounter;
-     if(GPT.SampleRateCounter >= instru.sampleRate){
-         GPT.SampleRateCounter = 0; //To get right data, ADC must be delay 1.5ms
-         EliteADCControl(0);
-     }
-
-     //Notify counter(Notify control, check if we need to send notify)
-     //please don't put Notify counter before ADC counter, maybe get wrong data
-     GPT.NotifyCounter = GPT.NotifyCounter + GPT.DeltaGptimerCounter;
-     if(GPT.NotifyCounter >= instru.notifyRate){
-         GPT.NotifyCounter -= instru.notifyRate; //To get right time
-         notify_flag = true;
-         if(vscanReset){
-             notify_flag = false;
-         }
-         if(notify_flag){
-             SendNotify();
-             notify_flag = false;
-         }
-     }
-
-     mode_done();
-
-}
-
-static void peri_mode(void)
-{
-
-
-    GPT.LeadTimeCounter = GPT.LeadTimeCounter + GPT.DeltaGptimerCounter;
-    if (leadTimeReset && GPT.LeadTimeCounter <= 2000) {
-        vscanReset = true;
-        if (first_highz_flag && GPT.LeadTimeCounter >= 1000) {
-            if (instru.eliteFxn == CURVE_OCP) {
-                PIN15_setOutputValue(HIGH_Z_MODE, 0);
-            } else {
-                PIN15_setOutputValue(HIGH_Z_MODE, 1); // HIGH Z MODE // 1: close; 0: open;
-            }
-            first_highz_flag = false;
-        }
-    } else {
-        if (notifyFirst_flag) {
-            GPT.NotifyCounter = instru.notifyRate - 20;
-            notifyFirst_flag = false;
-        }
-        vscanReset = false;
-        leadTimeReset = false;
-    }
-
-    //vscan counter
-    GPT.VscanRateCounter = GPT.VscanRateCounter + GPT.DeltaGptimerCounter;
-    if (GPT.VscanRateCounter >= instru.VsetRate) {
-        if (GPT.VscanRateCounter >= instru.VsetRate * 2) {
-            GPT.GptimerMultiple = GPT.VscanRateCounter / instru.VsetRate;
-        } else {
-            GPT.GptimerMultiple = 1;
-        }
-        GPT.VscanRateCounter -= instru.VsetRate * GPT.GptimerMultiple; //To get right time
-        vscan_ctrl(0);
-    }
-
-    //battery counter
-    GPT.BatteryADCCounter = GPT.BatteryADCCounter + GPT.DeltaGptimerCounter;
-    GPT.BatteryCheckCounter = GPT.BatteryCheckCounter + GPT.DeltaGptimerCounter;
-    if(GPT.BatteryCheckCounter >= 50000){
-        GPT.BatteryCheckCounter -= 50000; //To get right time
-        batteryCheck_flag = true;
-        tempCheck_flag = true;
-        if ((instru.eliteFxn == CURVE_IV) ||
-                (instru.eliteFxn == CURVE_IV_CY) ||
-                (instru.eliteFxn == CURVE_CC) ||
-                (instru.eliteFxn == CURVE_CV) ||
-                (instru.eliteFxn == CURVE_LSV) ||
-                (instru.eliteFxn == CURVE_CA) ||
-                (instru.eliteFxn == CURVE_OCP) ||
-                (instru.eliteFxn == CURVE_PULSE) ||
-                (instru.eliteFxn == CURVE_UNI_PULSE) ||
-                (instru.eliteFxn == CURVE_DPV) ||
-                (instru.eliteFxn == CURVE_DPV_SMPRATE) ||
-                (instru.eliteFxn == CURVE_DPV_ADVANCE) ||
-                (instru.eliteFxn == CURVE_DPV_ADVANCE_SMPRATE) ||
-                (instru.eliteFxn == CURVE_CALI_ADC)) {
-            batteryCheck_flag = false;
-            tempCheck_flag = false;
-
-        }
-    }
-
-    uint16_t bat = NotifyVoltBat;
-    if( bat < 768 && bat > 20){
-//            PIN15_setOutputValue(enable_5v, 0);
-    }
-
-    //ADC counter
-    GPT.SampleRateCounter = GPT.SampleRateCounter + GPT.DeltaGptimerCounter;
-    if(GPT.SampleRateCounter >= instru.sampleRate){
-        GPT.SampleRateCounter = 0; //To get right data, ADC must be delay 1.5ms
-        EliteADCControl(0);
-    }
-
-    // Over temperature protection
-    uint16_t CC2650temp = NotifyTemperature;
-    if(CC2650temp > 40) {
-        PIN15_setOutputValue(enable_5v, 0);
-    }
-
-    //Notify counter(Notify control, check if we need to send notify)
-    //please don't put Notify counter before ADC counter, maybe get wrong data
-    GPT.NotifyCounter = GPT.NotifyCounter + GPT.DeltaGptimerCounter;
-    if(GPT.NotifyCounter >= instru.notifyRate){
-        GPT.NotifyCounter -= instru.notifyRate; //To get right time
-        notify_flag = true;
-        if(vscanReset){
-            notify_flag = false;
-        }
-
-        if (!volt_rec_en || !curr_rec_en) {
-            notify_flag = false;
-        }
-
-        if(notify_flag){
-            SendNotify();
-            notify_flag = false;
-        }
-    }
-
-    mode_done();
-
-}
-
-static void uni_pulse_mode(void)
-{
-    // Default working flow is vscan -> ADC read -> send notify
-    // We will need a flag to control vscan, ADC and notify
-
-    GPT.LeadTimeCounter = GPT.LeadTimeCounter + GPT.DeltaGptimerCounter;
-    if (leadTimeReset && GPT.LeadTimeCounter <= 2000) {
-        vscanReset = true;
-        GPT.VscanRateCounter = 0xFFFFFFFF;
-        dpv_step_cnt = 0;
-        if (first_highz_flag && GPT.LeadTimeCounter >= 1000) {
-            PIN15_setOutputValue(HIGH_Z_MODE, instru.hign_z_en); // HIGH Z MODE // 1: close; 0: open;
-            first_highz_flag = false;
-        }
-    } else {
-        if (notifyFirst_flag) {
-            GPT.NotifyCounter = instru.notifyRate - 20;
-            notifyFirst_flag = false;
-        }
-        if (vscanReset) {
-            GPT.VscanRateCounter = 0xFFFFFFFF;
-            dpv_step_cnt = 0;
-        }
-        vscanReset = false;
-        leadTimeReset = false;
-    }
-
-    //vscan counter
-    GPT.VscanRateCounter = GPT.VscanRateCounter + GPT.DeltaGptimerCounter;
-    if (GPT.VscanRateCounter >= instru.period) {
-        GPT.VscanRateCounter -= instru.period; //To get right time
-        dpv_step_cnt +=1;
-    }
-    vscan_ctrl(GPT.VscanRateCounter);
-
-    //battery counter
-    GPT.BatteryADCCounter = GPT.BatteryADCCounter + GPT.DeltaGptimerCounter;
-    GPT.BatteryCheckCounter = GPT.BatteryCheckCounter + GPT.DeltaGptimerCounter;
-    if(GPT.BatteryCheckCounter >= 50000){
-        GPT.BatteryCheckCounter -= 50000; //To get right time
-        batteryCheck_flag = true;
-        tempCheck_flag = true;
-
-        if ((instru.eliteFxn == CURVE_IV) ||
-                (instru.eliteFxn == CURVE_IV_CY) ||
-                (instru.eliteFxn == CURVE_CC) ||
-                (instru.eliteFxn == CURVE_CV) ||
-                (instru.eliteFxn == CURVE_LSV) ||
-                (instru.eliteFxn == CURVE_CA) ||
-                (instru.eliteFxn == CURVE_OCP) ||
-                (instru.eliteFxn == CURVE_PULSE) ||
-                (instru.eliteFxn == CURVE_UNI_PULSE) ||
-                (instru.eliteFxn == CURVE_DPV) ||
-                (instru.eliteFxn == CURVE_DPV_SMPRATE) ||
-                (instru.eliteFxn == CURVE_DPV_ADVANCE) ||
-                (instru.eliteFxn == CURVE_DPV_ADVANCE_SMPRATE) ||
-                (instru.eliteFxn == CURVE_CALI_ADC)) {
-            batteryCheck_flag = false;
-            tempCheck_flag = false;
-
-        }
-    }
-
-    //ADC counter
-    GPT.SampleRateCounter = GPT.SampleRateCounter + GPT.DeltaGptimerCounter;
-    if(GPT.SampleRateCounter >= instru.sampleRate){
-        GPT.SampleRateCounter = 0; //To get right data, ADC must be delay 1.5ms
-        EliteADCControl(GPT.VscanRateCounter);
-    }
-
-    uint16_t bat = NotifyVoltBat;
-    if( bat < 768 && bat > 20){
-//            PIN15_setOutputValue(enable_5v, 0);
-    }
-
-    // Over temperature protection
-    uint16_t CC2650temp = NotifyTemperature;
-    if(CC2650temp > 40) {
-        PIN15_setOutputValue(enable_5v, 0);
-    }
-
-    if (instru.eliteFxn == CURVE_DPV || instru.eliteFxn == CURVE_DPV_ADVANCE) {
-
-    } else {
-        //Notify counter(Notify control, check if we need to send notify)
-        //please don't put Notify counter before ADC counter, maybe get wrong data
-        GPT.NotifyCounter = GPT.NotifyCounter + GPT.DeltaGptimerCounter;
-        if(GPT.NotifyCounter >= instru.notifyRate){
-            GPT.NotifyCounter -= instru.notifyRate; //To get right time
-            notify_flag = true;
-            if (instru.eliteFxn == CURVE_UNI_PULSE) {
-                notify_flag = false;
-            }
-            if(vscanReset){
-                notify_flag = false;
-            }
-
-            if (!volt_rec_en || !curr_rec_en) {
-                notify_flag = false;
-            }
-
-            if(notify_flag){
-                SendNotify();
-                notify_flag = false;
-            }
-        }
-    }
-
-
-    mode_done();
-
-}
-
-static void mode_init_set(void)
-{
-    batteryADC_flag = false;
-    volt_rec_en     = true;
-    curr_rec_en     = true;
-    firstTimeReset  = true;
-    notifyFirst_flag = true;
-    first_highz_flag = true;
-    DACReset          = true;
-    vscanReset        = true;
-    leadTimeReset     = true;
-
-    if (instru.notifyRate > 1000) {
-    // slow notify rate, < 10sps, auto gain changer only use ADC gain level = 1.2.3.4
-    // gain_switch_on: [1:4]: none
-    //                 [5]: ADC gain level = 4, if value = 1, gain 4 switch on
-    //                 [6]: ADC gain level = 3, if value = 1, gain 3 switch on
-    //                 [7]: ADC gain level = 2, if value = 1, gain 2 switch on
-    //                 [8]: ADC gain level = 1, if value = 1, gain 1 switch on
-        instru.gain_switch_on = 0b11110000;
-
-    } else {
-    // fast notify rate, >= 10sps, auto gain changer only use ADC gain level = 1.2.3
-        instru.gain_switch_on = 0b01110000;
-    }
-
-    if (instru.IinADCGainLv == I_GAIN_AUTO) {
-        instru.IinADCGainLv = I_GAIN_100R;
-    }
-
-    if (instru.VinADCAutoGainEn == VIN_GAIN_AUTO) {
-        instru.VinADCGainLv = VIN_GAIN_1K;
-    }
-
-    VinADCGainCtrl(instru.VinADCGainLv);
-    IinADCGainCtrl(instru.IinADCGainLv);
-    VoutGainControl(instru.VoutGainLv);
-
-    if (Ve1MatchVe2Mode()) {
-        if (instru.Ve1 == instru.Ve2) {
-            DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLv, instru.Ve1));
-            PeriodicEvent = false;
-            PIN15_setOutputValue(HIGH_Z_MODE, 0); // 0: open highz;
-            ModeLED(NO_EVENT);
-        }
-    }
-
-    return;
-}
-
-/*********************************************************************
- * @fn      SimpleBLEPeripheral_performPeriodicTask
- *
- * @brief   Control periodic event such as DAC out, ADC read, and send notify.
- *
- * @param   None.
- *
- * @return  None.
- */
-static void SimpleBLEPeripheral_performPeriodicTask(void)
-{
-    GPT.DeltaGptimerCounter = GPT.GptimerCounter - GPT.GptimerCounter0;
-    GPT.GptimerCounter0 = GPT.GptimerCounter;
-
-    if (IsPeriodicMode()) {
-        if (mode_init) {
-            GPT.SampleRateCounter = instru.sampleRate - 10;
-            GPT.VscanRateCounter  = instru.VsetRate - 1;
-            mode_init  = false;
-            mode_init_set();
-        }
-
-        peri_mode();
-
-        return;
-    }
-
-    if (instru.eliteFxn == CURVE_UNI_PULSE) {
-        if (mode_init) {
-            mode_init = false;
-            mode_init_set();
-            calc_avg_en = false;
-        }
-
-        uni_pulse_mode();
-
-        return;
-    }
-
-    if (instru.eliteFxn == CURVE_DPV || instru.eliteFxn == CURVE_DPV_ADVANCE) {
-        if (mode_init) {
-            mode_init = false;
-            mode_init_set();
-            calc_avg_en = false;
-        }
-
-        uni_pulse_mode();
-
-        return;
-    }
-
-    if (instru.eliteFxn == CURVE_DPV_SMPRATE || instru.eliteFxn == CURVE_DPV_ADVANCE_SMPRATE) {
-        if (mode_init) {
-            mode_init = false;
-            mode_init_set();
-        }
-
-        uni_pulse_mode();
-
-        return;
-    }
-
-
-    return;
-}
-
-
-
-/*
- * EliteADCControl(): use ADC plot, and send what data to controller
- * +-----------------+-----------+-----------+-----------+
- * |      MODE       |    ch1    |    ch2    |    ch3    |
- * +-----------------+-----------+-----------+-----------+
- * | CURVE_IV        |    Iin    |    Vout   |    Vin    |
- * | CURVE_IV_CY     |    Iin    |    Vout   |    Vin    |
- * | CURVE_VO        |    Iin    |    Vout   |    Vin    |
- * | CURVE_RT        |    Iin    |    Vout   |     R     |
- * | CURVE_VT        |    Iin    |    Vin    |           |
- * | CURVE_IT        |    Iin    |    Vin    |    Vout   |
- * | CURVE_CC        |    Iin    |    Vin    |    Vout   |
- * | CURVE_CV        |    Iin    | Vout-Vin  |    Vout   |
- * | CURVE_LSV       |    Iin    | Vout-Vin  |    Vout   |
- * | CURVE_CA        |    Iin    | Vout-Vin  |    Vout   |
- * | CURVE_OCP       |    Iin    | Vmon-Vin  |    Vin    |
- * | CURVE_UNI_PULSE |  pul1_Iin | pul2_Iin  |           |
- * +-----------------+-----------+-----------+-----------+
- */
-
-static void EliteADCControl(uint32_t time)
-{
-    void *wm = wm_get();
-    uint32_t t = time;
-
-    switch (instru.eliteFxn) {
-        case CURVE_IV:
-        case CURVE_IV_CY:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200);
-                InputNotify(NOTIFY_IMPEDANCE, MEAS_VIN(wm));
-            }
-            break;
-
-        case CURVE_RT:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200);
-            }
-            break;
-
-        case CURVE_CC:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            }
-            break;
-
-        case CURVE_CV:
-        case CURVE_CA:
-        case CURVE_LSV:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200 - MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            }
-            break;
-
-        case CURVE_PULSE:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, MEAS_VOUT(wm));
-            }
-            break;
-
-        case CURVE_IT:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if(volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            }
-            break;
-
-        case CURVE_VT:
-            Iin_Vin_Plot();
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, MEAS_VIN(wm));
-            }
-            break;
-
-        case CURVE_VO:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200);
-                InputNotify(NOTIFY_IMPEDANCE, MEAS_VIN(wm));
-            }
-            break;
-
-        case CURVE_OCP:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, MEAS_VOUT(wm) - MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, MEAS_VIN(wm));
-            }
-            break;
-
-        case CURVE_CALI_ADC:
-            if (instru.AdcChannel == RIS_ADC_IIN) {
-                cali_IT_plot();
-            } else if (instru.AdcChannel == RIS_ADC_VIN) {
-                cali_VT_plot();
-            } else if (instru.AdcChannel == RIS_DAC_VOUT) {
-                cali_Vout_plot();
-            }
-            break;
-
-        case CURVE_UNI_PULSE:
-            IT_Plot(t);
-            break;
-
-        case CURVE_DPV:
-            Iin_Vin_Vout_Plot(t);
-            break;
-
-        case CURVE_DPV_SMPRATE:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200 - MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            }
-            break;
-
-        case CURVE_DPV_ADVANCE:
-            Iin_Vin_Vout_Plot(t);
-            break;
-
-        case CURVE_DPV_ADVANCE_SMPRATE:
-            Iin_Vin_Vout_Plot(t);
-            if (curr_rec_en) {
-                InputNotify(NOTIFY_CURRENT, MEAS_CURR(wm));
-            }
-            if (volt_rec_en) {
-                InputNotify(NOTIFY_VOLT, instru.Vout/200 - MEAS_VIN(wm));
-                InputNotify(NOTIFY_IMPEDANCE, instru.Vout/200);
-            }
-            break;
-
-        default:
-            break;
-    }
-}
-
-static void mode_done(void)
-{
-    if ((instru.eliteFxn == CURVE_IV)  ||
-        (instru.eliteFxn == CURVE_CV)  ||
-        (instru.eliteFxn == CURVE_LSV) ||
-        (instru.eliteFxn == CURVE_IV_CY) ||
-        (instru.eliteFxn == CURVE_DPV) ||
-        (instru.eliteFxn == CURVE_DPV_SMPRATE) ||
-        (instru.eliteFxn == CURVE_DPV_ADVANCE) ||
-        (instru.eliteFxn == CURVE_DPV_ADVANCE_SMPRATE)) {
-        if (!PeriodicEvent) {
-            finishMode = true;
-            SendNotify();
-            Eliteinterrupt();
-        }
-    }
-}
-
-static void vscan_ctrl(uint32_t time)
-{
-    uint32_t t = time;
-
-    switch (instru.eliteFxn) {
-        case CURVE_IV:
-            iv_vscan();
-            break;
-
-        case CURVE_IV_CY:
-            iv_cy_vscan();
-            break;
-
-        case CURVE_VO:
-            vo_vscan();
-            break;
-
-        case CURVE_RT:
-            rt_vscan();
-            break;
-
-        case CURVE_IT:
-            it_vscan();
-            break;
-
-        case CURVE_CV:
-            cv_vscan();
-            break;
-
-        case CURVE_LSV:
-            lsv_vscan();
-            break;
-
-        case CURVE_CA:
-            ca_vscan();
-            break;
-
-        case CURVE_UNI_PULSE:
-            uni_pulse_vscan(t);
-            break;
-
-        case CURVE_DPV:
-        case CURVE_DPV_SMPRATE:
-            dpv_vscan(t);
-            break;
-
-        case CURVE_DPV_ADVANCE:
-        case CURVE_DPV_ADVANCE_SMPRATE:
-            dpv_advance_vscan(t);
-            break;
-
-
-        default:{
-            break;
-        }
-    }
-}
-
-static uint32_t OldStep2NewStepTime(uint32_t StepTime){
-    uint8_t StepTimeLevel = 0;
-    StepTimeLevel = StepTime / 0x12;
-
-    switch (StepTimeLevel) {
-        case 0: {  //0.5 sec
-            return STEPTIME_HALF_SEC;
-        }
-        case 1: {  //1 sec
-            return STEPTIME_ONE_SEC;
-        }
-        case 2: {  //2 sec
-            return STEPTIME_TWO_SEC;
-        }
-        default: {  //1 sec
-            return STEPTIME_ONE_SEC;
-        }
-    }
-}
-
-static void step2VsetRate(uint32_t step){
-    /*step = 100 mv, index = 0, n = 2
-             10  mv, index = 1, n = 10
-             1   mv, index = 2, n = 100
-             0.1 mv, index = 3, n = 1000
-             0.01mv, index = 4, n = 10000  */
-
-    if(step >= 10000){
-        instru.VsetRateIndex = 0;
-    }else if (step >= 1000){
-        instru.VsetRateIndex = 1;
-    }else if (step >= 100){
-        instru.VsetRateIndex = 2;
-    }else if (step >= 10){
-        instru.VsetRateIndex = 3;
-    }else if (step >= 1){
-        instru.VsetRateIndex = 4;
-    }
-}
-
-#endif /* IMPEDANCE_METER_H_ */

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/scan_volt.h

@@ -1,879 +0,0 @@
-#ifndef SCAN_VOLT_H
-#define SCAN_VOLT_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#define Vset instru.Vset
-
-static void iv_vscan(void)
-{
-    struct wm_iv_ctx_t *iv = (struct wm_iv_ctx_t *)wm_get();
-
-    if (vscanReset) {
-        if (instru.directionInit == 1) {
-            iv->_direction_up         = true;
-            iv->_current_direction_up = true;
-        } else if (instru.directionInit == 0) {
-            iv->_direction_up         = false;
-            iv->_current_direction_up = false;
-        }
-
-        //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if (instru.step <= 10) {
-            iv->_Vstep = instru.step * instru.VsetRate / 5;
-        } else {
-            iv->_Vstep = instru.step / 5 * instru.VsetRate;
-        }
-
-        Vset = iv->_Vinit;
-    }
-
-    if (!vscanReset) {
-        if (iv->_current_direction_up) {
-            if (Vset >= iv->_Vmax) {
-                PeriodicEvent = false;
-            }
-        } else {
-            if (Vset <= iv->_Vmin) {
-                PeriodicEvent = false;
-            }
-        }
-
-        if (iv->_current_direction_up) {
-            Vset = Vset + iv->_Vstep * GPT.GptimerMultiple;
-        } else {
-            Vset = Vset - iv->_Vstep * GPT.GptimerMultiple;
-        }
-    }
-
-    return;
-}
-
-static void iv_cy_vscan(void)
-{
-    struct wm_iv_cy_ctx_t *iv_cy = (struct wm_iv_cy_ctx_t *)wm_get();
-    static bool VminCounter;
-    static bool VmaxCounter;
-
-    NotifyCycleNumber = (instru.cycleNumber - iv_cy->_cycleNumber + 1);
-
-    if(vscanReset){
-        VmaxCounter = false;
-        VminCounter = false;
-
-        if(instru.directionInit == 1){
-            iv_cy->_direction_up         = true;
-            iv_cy->_current_direction_up = true;
-        }else if(instru.directionInit == 0){
-            iv_cy->_direction_up         = false;
-            iv_cy->_current_direction_up = false;
-        }
-
-        //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if(instru.step <= 10){
-            iv_cy->_Vstep = instru.step * instru.VsetRate / 5;
-        }else{
-            iv_cy->_Vstep = instru.step / 5 * instru.VsetRate;
-        }
-
-        if(iv_cy->_Vmin == iv_cy->_Vinit){
-            VminCounter = true;
-        }
-        if(iv_cy->_Vmax == iv_cy->_Vinit){
-            VmaxCounter = true;
-        }
-
-        Vset = iv_cy->_Vinit;
-    }
-
-    if(!vscanReset){
-        if (Vset >= iv_cy->_Vmax){
-            VmaxCounter = true;
-        }else if (Vset <= iv_cy->_Vmin){
-            VminCounter = true;
-        }
-
-        if (iv_cy->_current_direction_up){
-            Vset = Vset + iv_cy->_Vstep * GPT.GptimerMultiple;
-        }else{
-            Vset = Vset - iv_cy->_Vstep * GPT.GptimerMultiple;
-        }
-
-        if(VmaxCounter && VminCounter){
-            if(iv_cy->_direction_up && iv_cy->_current_direction_up){
-                if(Vset >= iv_cy->_Vinit){
-                    iv_cy->_cycleNumber--;
-                    VminCounter = false;
-                    VmaxCounter = false;
-                }
-            }
-            if(!iv_cy->_direction_up && !iv_cy->_current_direction_up){
-                if(Vset <= iv_cy->_Vinit){
-                    iv_cy->_cycleNumber--;
-                    VminCounter = false;
-                    VmaxCounter = false;
-                }
-            }
-        }
-
-        if (Vset >= iv_cy->_Vmax){
-            iv_cy->_current_direction_up = false;
-        }else if (Vset <= iv_cy->_Vmin){
-            iv_cy->_current_direction_up = true;
-        }
-
-        /*stop condition*/
-        if(iv_cy->_cycleNumber == 0){
-            PeriodicEvent = false;
-        }
-    }
-
-    return;
-}
-
-static void it_vscan(void)
-{
-    struct wm_it_ctx_t *it = (struct wm_it_ctx_t *)wm_get();
-
-    if (vscanReset) {
-        Vset = it->_Vinit;
-    }
-
-    if(!vscanReset) {
-        Vset = it->_Vinit;
-    }
-
-    return;
-}
-
-static void rt_vscan(void)
-{
-    struct wm_rt_ctx_t *rt = (struct wm_rt_ctx_t *)wm_get();
-
-    if (vscanReset) {
-        Vset = rt->_Vinit;
-    }
-
-    if(!vscanReset) {
-        Vset = rt->_Vinit;
-    }
-
-    return;
-}
-
-static void vo_vscan(void)
-{
-    struct wm_vo_ctx_t *vo = (struct wm_vo_ctx_t *)wm_get();
-
-    if (vscanReset) {
-        Vset = vo->_Vinit;
-    }
-
-    if(!vscanReset) {
-        Vset = vo->_Vinit;
-    }
-
-    return;
-}
-
-#define DELTAVOLTMAX 2000000 //2000000 = 10mV
-static void cc_vscan(void)
-{
-    /* Transform setting CC into IUC
-     *
-     * User code in CC mode : 0 ~ 3000000
-     * Real current value : -15.00000 ~ 15.00000 mA
-     *  => user code = 1500000 mapping to 0.00000 mA
-     */
-
-    struct wm_cc_ctx_t *cc = (struct wm_cc_ctx_t *)wm_get();
-    struct wm_meas_t *m = &cc->measure;
-    uint16_t divisionRate;
-    int32_t deltaI;
-    int32_t deltaV;
-    int32_t Iin;
-    int32_t Vin;
-
-    if (vscanReset) {
-        Vset = 0;
-
-        if (cc->_charge == 0) {
-            cc->_Iset = instru.constantCurrent * 200 * (-1);
-            //[50pA] //controller UI 15000uA => Elite 1500000 => 1500000 * 10 * 1000 / 50 [50pA];
-        }
-
-        Iin = m->_measureCurrent * 20; //[50pA]   nA => 50pA
-        Vin = m->_measureVin * 200; //[5nV]
-
-        Vset = Vin + cc->_Iset; //[5nV]
-
-        if (Vset >= 1100000000) { // 5.5V
-            Vset = 1100000000;
-        } else if (Vset <= -1000000000) { //-5V
-            Vset = -1000000000;
-        }
-    }
-
-    if (!vscanReset) {
-        Iin = m->_measureCurrent * 20; //[50pA]   nA => 50pA
-        deltaI = Iin - cc->_Iset;
-
-        if (deltaI > 2000000 || deltaI < -2000000) { //100uA
-            divisionRate = 1;
-        } else {
-            divisionRate = 20;
-        }
-
-        deltaV = -1 * (deltaI / divisionRate); //-5 * deltaI / 5000   //pV=> 5nV
-
-        if (deltaV > DELTAVOLTMAX) { //2000000 = 10mV
-            deltaV = DELTAVOLTMAX;
-        } else if (deltaV < (-DELTAVOLTMAX)) {
-            deltaV = (-DELTAVOLTMAX);
-        }
-
-        Vset = Vset + deltaV; //[5nV]
-
-        if (Vset >= 1100000000) { // 5.5V
-            Vset = 1100000000;
-        } else if (Vset <= -1000000000) { //-5V
-            Vset = -1000000000;
-        }
-
-        if (Vset <= cc->_Vmin) {
-            Vset = cc->_Vmin;
-        } else if (Vset >= cc->_Vmax) {
-            Vset = cc->_Vmax;
-        }
-    }
-
-    return;
-}
-
-static void cv_vscan(void)
-{
-    struct wm_cv_ctx_t *cv = (struct wm_cv_ctx_t *)wm_get();
-    static bool VminCounter;
-    static bool VmaxCounter;
-
-    NotifyCycleNumber = (instru.cycleNumber - cv->_cycleNumber + 1);
-
-
-    if (vscanReset) {
-        VmaxCounter = false;
-        VminCounter = false;
-
-        if (instru.directionInit == 1) {
-            cv->_direction_up         = true;
-            cv->_current_direction_up = true;
-        } else {
-            cv->_direction_up         = false;
-            cv->_current_direction_up = false;
-        }
-
-        //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if (instru.step <= 10) {
-            cv->_Vstep = instru.step *  instru.VsetRate / 5;
-        } else {
-            cv->_Vstep = instru.step / 5 *  instru.VsetRate;
-        }
-
-        if (cv->_Vmin == cv->_Vinit) {
-            VminCounter = true;
-        }
-        if (cv->_Vmax == cv->_Vinit) {
-            VmaxCounter = true;
-        }
-
-        Vset = cv->_Vinit;
-    }
-
-    if (!vscanReset) {
-        if ((instru.Vinit < instru.Ve1 && instru.Vinit < instru.Ve2) ||
-        (instru.Vinit > instru.Ve1 && instru.Vinit > instru.Ve2)
-        ) {
-            if (cv->_current_direction_up) {
-                Vset = Vset + cv->_Vstep * GPT.GptimerMultiple;
-            } else {
-                Vset = Vset - cv->_Vstep * GPT.GptimerMultiple;
-            }
-
-            if (instru.Vinit < instru.Ve1 && instru.Vinit < instru.Ve2) {
-                if (Vset == cv->_Vmin) {
-                    VminCounter = true;
-                    instru.Vinit = instru.Vmin;
-                    cv->_Vinit = cv->_Vmin;
-                }
-            } else if (instru.Vinit > instru.Ve1 && instru.Vinit > instru.Ve2) {
-                if (Vset == cv->_Vmax) {
-                    VmaxCounter = true;
-                    instru.Vinit = instru.Vmax;
-                    cv->_Vinit = cv->_Vmax;
-                }
-            }
-        } else {
-            if (Vset >= cv->_Vmax) {
-                VmaxCounter = true;
-            } else if (Vset <= cv->_Vmin) {
-                VminCounter = true;
-            }
-
-            if (cv->_current_direction_up) {
-                Vset = Vset + cv->_Vstep * GPT.GptimerMultiple;
-            } else {
-                Vset = Vset - cv->_Vstep * GPT.GptimerMultiple;
-            }
-
-            if (VmaxCounter && VminCounter) {
-                if (cv->_direction_up && cv->_current_direction_up) {
-                    if (Vset >= cv->_Vinit) {
-                        cv->_cycleNumber--;
-                        VminCounter = false;
-                        VmaxCounter = false;
-                    }
-                }
-                if (!cv->_direction_up && !cv->_current_direction_up) {
-                    if (Vset <= cv->_Vinit) {
-                        cv->_cycleNumber--;
-                        VminCounter = false;
-                        VmaxCounter = false;
-                    }
-                }
-            }
-
-            if (Vset >= cv->_Vmax) {
-                cv->_current_direction_up = false;
-            } else if (Vset <= cv->_Vmin) {
-                cv->_current_direction_up = true;
-            }
-
-            /*stop condition*/
-            if (cv->_cycleNumber == 0) {
-                PeriodicEvent = false;
-            }
-        }
-    }
-
-    return;
-}
-
-static void lsv_vscan(void)
-{
-    struct wm_lsv_ctx_t *lsv = (struct wm_lsv_ctx_t *)wm_get();
-
-    NotifyCycleNumber = (instru.cycleNumber - lsv->_cycleNumber + 1);
-
-    if (vscanReset) {
-        if (instru.directionInit == 1) {
-            lsv->_direction_up         = true;
-            lsv->_current_direction_up = true;
-        } else {
-            lsv->_direction_up         = false;
-            lsv->_current_direction_up = false;
-        }
-
-         //Vsetp = x * 20 * N, x=xmV ; N=VscanRate
-        if (instru.step <= 10) {
-            lsv->_Vstep = instru.step *  instru.VsetRate / 5;
-        } else {
-            lsv->_Vstep = instru.step / 5 *  instru.VsetRate;
-        }
-
-        Vset = lsv->_Vinit;
-    }
-
-    if (!vscanReset) {
-
-        if (lsv->_current_direction_up) {
-            Vset = Vset + lsv->_Vstep * GPT.GptimerMultiple;
-        } else {
-            Vset = Vset - lsv->_Vstep * GPT.GptimerMultiple;
-        }
-
-        /*stop condition*/
-        if (Vset >= lsv->_Vmax) {
-            PeriodicEvent = false;
-        } else if (Vset <= lsv->_Vmin) {
-            PeriodicEvent = false;
-        }
-    }
-
-    return;
-}
-
-static void ca_vscan(void)
-{
-    struct wm_ca_ctx_t *ca = (struct wm_ca_ctx_t *)wm_get();
-
-    if(vscanReset){
-        Vset = ca->_Vinit;
-    }
-
-    if(!vscanReset){
-        Vset = ca->_Vinit;
-    }
-
-    return;
-}
-
-
-static void uni_pulse_vscan(uint32_t time)
-{
-    uint32_t t = time;
-    struct wm_uni_pulse_ctx_t *p = (struct wm_uni_pulse_ctx_t *)wm_get();
-    uint32_t m;
-    uint32_t t_min;
-    uint32_t t_max;
-
-    if(vscanReset){
-        Vset = p->_v0;
-
-        return;
-    }
-
-    if(!vscanReset){
-
-        if (t == 0) {
-            m = 0;
-        } else {
-           m = t % p->_t_period;
-        }
-
-        if (m < p->_t_pa[0]) {
-            p->_Vset = p->_v_initial[0] + p->_v_slope[0] * t + p->_v_step[0] * (int32_t)(t / p->_t_period);
-            Vset = p->_Vset;
-
-            t_min = p->_t_pulse_min[0];
-            t_max = p->_t_pulse_max[0];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        if (m < p->_t_pa[1]) {
-            p->_Vset = p->_v_initial[1] + p->_v_slope[1] * t + p->_v_step[1] * (int32_t)(t / p->_t_period);
-            Vset = p->_Vset;
-
-            t_min = p->_t_pa[0] + p->_t_pulse_min[1];
-            t_max = p->_t_pa[0] + p->_t_pulse_max[1];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        if (m < p->_t_pa[2]) {
-            p->_Vset = p->_v_initial[2] + p->_v_slope[2] * t + p->_v_step[2] * (int32_t)(t / p->_t_period);
-            Vset = p->_Vset;
-
-            t_min = p->_t_pa[1] + p->_t_pulse_min[2];
-            t_max = p->_t_pa[1] + p->_t_pulse_max[2];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        if (m < p->_t_pa[3]) {
-            p->_Vset = p->_v_initial[3] + p->_v_slope[3] * t + p->_v_step[3] * (int32_t)(t / p->_t_period);
-            Vset = p->_Vset;
-
-            t_min = p->_t_pa[2] + p->_t_pulse_min[3];
-            t_max = p->_t_pa[2] + p->_t_pulse_max[3];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        return;
-    }
-
-    return;
-}
-
-static void dpv_vscan(uint32_t time)
-{
-    uint32_t t = time;
-    struct wm_dpv_ctx_t *p = (struct wm_dpv_ctx_t *)wm_get();
-    uint32_t m;
-    uint32_t t_min;
-    uint32_t t_max;
-
-    if(vscanReset){
-        Vset = p->_v0;
-
-        return;
-    }
-
-    if(!vscanReset){
-
-        if (t == 0) {
-            m = 0;
-        } else {
-           m = t % p->_t_period;
-        }
-
-        if (m < p->_t_pa[0]) {
-            p->_Vset = p->_v_initial[0] + p->_v_slope[0] * t / 1000 + p->_v_step[0] * (int32_t)dpv_step_cnt; // _v_slope/100 = slope
-            Vset = p->_Vset;
-
-            t_min = p->_t_pulse_min[0];
-            t_max = p->_t_pulse_max[0];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            if ((p->_v_curr_direc && Vset >= p->_v_stop) ||
-               (!p->_v_curr_direc && Vset <= p->_v_stop)) {
-                PeriodicEvent = false;
-            }
-
-            return;
-        }
-
-        if (m < p->_t_pa[1]) {
-            p->_Vset = p->_v_initial[1] + p->_v_slope[1] * t / 1000 + p->_v_step[1] * (int32_t)dpv_step_cnt;
-            Vset = p->_Vset;
-
-            t_min = p->_t_pa[0] + p->_t_pulse_min[1];
-            t_max = p->_t_pa[0] + p->_t_pulse_max[1];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        return;
-    }
-
-    return;
-}
-
-static void dpv_advance_vscan(uint32_t time)
-{
-    uint32_t t = time;
-    struct wm_dpv_advance_ctx_t *p = (struct wm_dpv_advance_ctx_t *)wm_get();
-    uint32_t m;
-    uint32_t t_min;
-    uint32_t t_max;
-    static bool VminCounter;
-    static bool VmaxCounter;
-
-    if(vscanReset){
-        if (p->_v_direc_init) {
-            if (p->_v0 <= p->_v_up && p->_v0 <= p->_v_low && p->_v_2 > p->_v_1) {
-                VminCounter = true;
-            }
-
-        } else {
-            if (p->_v0 >= p->_v_up && p->_v0 >= p->_v_low && p->_v_1 > p->_v_2) {
-                VmaxCounter = true;
-            }
-        }
-
-
-
-        p->_Vset = p->_v0;
-        Vset = p->_Vset;
-
-        return;
-    }
-
-    if(!vscanReset){
-
-        if (t == 0) {
-            m = 0;
-        } else {
-           m = t % p->_t_period;
-        }
-
-        if (m < p->_t_pa[0]) {
-
-            t_min = p->_t_pulse_min[0];
-            t_max = p->_t_pulse_max[0];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            p->_Vset = p->_v_initial[0] + p->_v_slope[0] * t / 1000 + p->_v_step[0] * (int32_t)dpv_step_cnt; // _v_slope/100 = slope
-            Vset = p->_Vset;
-
-            if (VminCounter == true && VmaxCounter == true) {
-                p->_cycleNumber--;
-                VminCounter = false;
-                VmaxCounter = false;
-
-            }
-
-            if (p->_cycleNumber <= 0) {
-                if (p->_v_stop_direction == true && p->_Vset >= p->_v_stop - p->_v_amp + p->_v_step[0]) {
-                    PeriodicEvent = false;
-                } else if (p->_v_stop_direction == false && p->_Vset <= p->_v_stop - p->_v_amp + p->_v_step[0]) {
-                    PeriodicEvent = false;
-                }
-            }
-
-            if (p->_v_curr_direc && p->_Vset >= p->_v_up - p->_v_amp + p->_v_step[0]) {
-                if (p->_v_invert_option) {
-                    p->_v_amp = p->_v_amp * (-1);
-                }
-                p->_v_initial[0] = p->_Vset;
-                p->_v_initial[1] = p->_v_initial[0] + p->_v_amp;
-                dpv_step_cnt = 0;
-                p->_v_step[0] = (-1) * p->_v_step[0];
-                p->_v_step[1] = (-1) * p->_v_step[1];
-                p->_v_curr_direc = false;
-                VmaxCounter = true;
-                p->_Vset = p->_v_initial[0] + p->_v_slope[0] * t / 1000 * (int32_t)dpv_step_cnt; // _v_slope/100 = slope
-                Vset = p->_Vset;
-
-            } else if (!p->_v_curr_direc && p->_Vset <= p->_v_low - p->_v_amp + p->_v_step[0]) {
-                if (p->_v_invert_option) {
-                    p->_v_amp = p->_v_amp * (-1);
-                }
-                p->_v_initial[0] = p->_Vset;
-                p->_v_initial[1] = p->_v_initial[0] + p->_v_amp;
-                dpv_step_cnt = 0;
-                p->_v_step[0] = (-1) * p->_v_step[0];
-                p->_v_step[1] = (-1) * p->_v_step[1];
-                p->_v_curr_direc = true;
-                VminCounter = true;
-                p->_Vset = p->_v_initial[0] + p->_v_slope[0] * t / 1000 * (int32_t)dpv_step_cnt; // _v_slope/100 = slope
-                Vset = p->_Vset;
-
-            }
-
-            return;
-        }
-
-        if (m < p->_t_pa[1]) {
-            p->_Vset = p->_v_initial[1] + p->_v_slope[1] * t / 1000 + p->_v_step[1] * (int32_t)dpv_step_cnt;
-            Vset = p->_Vset;
-
-            t_min = p->_t_pa[0] + p->_t_pulse_min[1];
-            t_max = p->_t_pa[0] + p->_t_pulse_max[1];
-
-            if (m > t_min && m < t_max) {
-                calc_avg_en = true;
-            } else {
-                calc_avg_en = false;
-            }
-
-            return;
-        }
-
-        return;
-    }
-
-    return;
-}
-
-static void pulse_vscan(void)
-{
-    struct wm_pulse_ctx_t *pulse = (struct wm_pulse_ctx_t *)wm_get();
-    static uint16_t lastVolt;
-
-    if (stiFirstTime) {
-        stiFirstTime = false;
-        lastVolt = 25000;
-        pulse->_sti_t_flag = 1;
-        pulse->_sti_v = pulse->_sti_v1;
-        pulse->_sti_t = pulse->_sti_t1;
-        if (pulse->_sti_t == 1) {
-            pulse->_sti_v = lastVolt;
-        }
-    } else if(!stiFirstTime) {
-        if (GPT.StiCounter >= pulse->_sti_t) {
-            GPT.StiCounter -= pulse->_sti_t; //to get right time
-
-            if (pulse->_sti_lp > 0) {
-                if (pulse->_sti_cy > 0) {
-                    if (pulse->_sti_t_flag == 1) {
-                        pulse->_sti_t_flag = 2;
-                        pulse->_sti_v = pulse->_sti_v2;
-                        pulse->_sti_t = pulse->_sti_t2;
-                        if (pulse->_sti_t == 1) {
-                            pulse->_sti_v = lastVolt;
-                        }
-                    } else if (pulse->_sti_t_flag == 2) {
-                        pulse->_sti_t_flag = 3;
-                        pulse->_sti_v = pulse->_sti_v3;
-                        pulse->_sti_t = pulse->_sti_t3;
-                        if (pulse->_sti_t == 1) {
-                            pulse->_sti_v = lastVolt;
-                        }
-                    } else if (pulse->_sti_t_flag == 3) {
-                        pulse->_sti_cy -- ;
-                        if (pulse->_sti_cy == 0) {
-                            pulse->_sti_t_flag = 4;
-                            pulse->_sti_v = pulse->_sti_v4;
-                            pulse->_sti_t = pulse->_sti_t4;
-                            if (pulse->_sti_t == 1) {
-                                pulse->_sti_v = lastVolt;
-                            }
-                        } else {
-                            pulse->_sti_t_flag = 2;
-                            pulse->_sti_v = pulse->_sti_v2;
-                            pulse->_sti_t = pulse->_sti_t2;
-                            if (pulse->_sti_t == 1) {
-                                pulse->_sti_v = lastVolt;
-                            }
-                        }
-                    }
-                } else if (pulse->_sti_cy <= 0){
-                    if (pulse->_sti_t_flag == 4) {
-                        pulse->_sti_lp -- ;
-                        if (pulse->_sti_lp > 0) {
-                            pulse->_sti_cy = instru.sti_cy;
-                            pulse->_sti_t_flag = 2;
-                            pulse->_sti_v = pulse->_sti_v2;
-                            pulse->_sti_t = pulse->_sti_t2;
-                            if (pulse->_sti_t == 1) {
-                                pulse->_sti_v = lastVolt;
-                            }
-                        } else {
-                            pulse->_sti_t_flag = 5;
-                            pulse->_sti_v = pulse->_sti_v5;
-                            pulse->_sti_t = pulse->_sti_t5;
-                            if (pulse->_sti_t == 1) {
-                                pulse->_sti_v = lastVolt;
-                            }
-                        }
-                    }
-                }
-            } else if (pulse->_sti_lp <= 0) {
-                if (pulse->_sti_t_flag == 5) {
-                    pulse->_sti_t_flag = 6;
-                    pulse->_sti_v = pulse->_sti_v6;
-                    pulse->_sti_t = pulse->_sti_t6;
-                    if (pulse->_sti_t == 1) {
-                        pulse->_sti_v = lastVolt;
-                    }
-                } else if (pulse->_sti_t_flag == 6) {
-                    pulse->_sti_t_flag = 7;
-                    pulse->_sti_v = pulse->_sti_v7;
-                    pulse->_sti_t = pulse->_sti_t7;
-                    if (pulse->_sti_t == 1) {
-                        pulse->_sti_v = lastVolt;
-                    }
-                } else if (pulse->_sti_t_flag == 7) {
-                    pulse->_sti_v = 25000;
-                    PeriodicEvent  = false;
-                    PIN15_setOutputValue(HIGH_Z_MODE, 0); // 0: open highz;
-                    ModeLED(NO_EVENT);
-                }
-            }
-        }
-    }
-
-    if (lastVolt != pulse->_sti_v) {
-        lastVolt = pulse->_sti_v;
-        //if (pulse->_sti_v == 25000) {
-        //    PIN15_setOutputValue(HIGH_Z_MODE, 0);   // 1 => close high_z mode
-        //} else {
-        //    PIN15_setOutputValue(HIGH_Z_MODE, 1);   // 1 => close high_z mode
-        //}
-        DAC_outputV(Usercode_Correction_to_DAC(VOUT_GAIN_240K, pulse->_sti_v));
-        DAC_outputV(Usercode_Correction_to_DAC(VOUT_GAIN_240K, pulse->_sti_v));
-    }
-
-    return;
-}
-
-static void chg_vo_para(uint16_t parameter, int32_t value)
-{
-    uint16_t pa = parameter;
-    int32_t val = value;
-    struct wm_vo_ctx_t *vo = (struct wm_vo_ctx_t *)wm_get();
-
-    if (pa == DAC_VOLT) {
-        vo->_Vinit = val;
-    }
-
-    return;
-}
-
-static void chg_it_para(uint16_t parameter, int32_t value)
-{
-    uint16_t pa = parameter;
-    int32_t val = value;
-    struct wm_it_ctx_t *it = (struct wm_it_ctx_t *)wm_get();
-
-    if (pa == DAC_VOLT) {
-        it->_Vinit = val;
-    }
-
-    return;
-}
-
-static void chg_rt_para(uint16_t parameter, int32_t value)
-{
-    uint16_t pa = parameter;
-    int32_t val = value;
-    struct wm_rt_ctx_t *rt = (struct wm_rt_ctx_t *)wm_get();
-
-    if (pa == DAC_VOLT) {
-        rt->_Vinit = val;
-    }
-
-    return;
-}
-
-static void set_para(uint8_t eliteFxn, uint16_t parameter, int32_t value)
-{
-    uint8_t mode = eliteFxn;
-    uint16_t pa = parameter;
-    int32_t val = value;
-
-    if (mode == CURVE_VO) {
-        chg_vo_para(pa, val);
-
-        return;
-    }
-
-    if (mode == CURVE_IT) {
-        chg_it_para(pa, val);
-
-        return;
-    }
-
-    if (mode == CURVE_RT) {
-        chg_rt_para(pa, val);
-
-        return;
-    }
-
-    return;
-}
-
-#endif

simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/main.c

@@ -50,13 +50,9 @@
 
 #include <xdc/runtime/Error.h>
 
-
 #include <ti/drivers/Power.h>
 #include <ti/drivers/power/PowerCC26XX.h>
 #include <ti/sysbios/BIOS.h>
-#include <ti/drivers/SPI.h>
-#include <ti/drivers/spi/SPICC26XXDMA.h>
-#include <ti/drivers/dma/UDMACC26XX.h>
 
 #include "icall.h"
 #include "hal_assert.h"
@@ -136,7 +132,7 @@ PIN_Handle radCtrlHandle;
 
 extern void AssertHandler(uint8 assertCause, uint8 assertSubcause);
 
-//extern Display_Handle dispHandle;
+// extern Display_Handle dispHandle;
 
 /*******************************************************************************
  * @fn          Main
@@ -251,48 +247,49 @@ int main()
  */
 void AssertHandler(uint8 assertCause, uint8 assertSubcause)
 {
+/*
   // Open the display if the app has not already done so
-//  if ( !dispHandle )
-//  {
-//    dispHandle = Display_open(Display_Type_LCD, NULL);
-//  }
+  if ( !dispHandle )
+  {
+    dispHandle = Display_open(Display_Type_LCD, NULL);
+  }
 
-
-//  Display_print0(dispHandle, 0, 0, ">>>STACK ASSERT");
+  Display_print0(dispHandle, 0, 0, ">>>STACK ASSERT");
 
   // check the assert cause
-//  switch (assertCause)
-//  {
-//    case HAL_ASSERT_CAUSE_OUT_OF_MEMORY:
-//      Display_print0(dispHandle, 0, 0, "***ERROR***");
-//      Display_print0(dispHandle, 2, 0, ">> OUT OF MEMORY!");
-//      break;
-//
-//    case HAL_ASSERT_CAUSE_INTERNAL_ERROR:
-//      // check the subcause
-//      if (assertSubcause == HAL_ASSERT_SUBCAUSE_FW_INERNAL_ERROR)
-//      {
-//        Display_print0(dispHandle, 0, 0, "***ERROR***");
-//        Display_print0(dispHandle, 2, 0, ">> INTERNAL FW ERROR!");
-//      }
-//      else
-//      {
-//        Display_print0(dispHandle, 0, 0, "***ERROR***");
-//        Display_print0(dispHandle, 2, 0, ">> INTERNAL ERROR!");
-//      }
-//      break;
-//
-//    case HAL_ASSERT_CAUSE_ICALL_ABORT:
-//      Display_print0(dispHandle, 0, 0, "***ERROR***");
-//      Display_print0(dispHandle, 2, 0, ">> ICALL ABORT!");
-//      HAL_ASSERT_SPINLOCK;
-//      break;
-//
-//    default:
-//      Display_print0(dispHandle, 0, 0, "***ERROR***");
-//      Display_print0(dispHandle, 2, 0, ">> DEFAULT SPINLOCK!");
-//      HAL_ASSERT_SPINLOCK;
-//  }
+  switch (assertCause)
+  {
+    case HAL_ASSERT_CAUSE_OUT_OF_MEMORY:
+      Display_print0(dispHandle, 0, 0, "***ERROR***");
+      Display_print0(dispHandle, 2, 0, ">> OUT OF MEMORY!");
+      break;
+
+    case HAL_ASSERT_CAUSE_INTERNAL_ERROR:
+      // check the subcause
+      if (assertSubcause == HAL_ASSERT_SUBCAUSE_FW_INERNAL_ERROR)
+      {
+        Display_print0(dispHandle, 0, 0, "***ERROR***");
+        Display_print0(dispHandle, 2, 0, ">> INTERNAL FW ERROR!");
+      }
+      else
+      {
+        Display_print0(dispHandle, 0, 0, "***ERROR***");
+        Display_print0(dispHandle, 2, 0, ">> INTERNAL ERROR!");
+      }
+      break;
+
+    case HAL_ASSERT_CAUSE_ICALL_ABORT:
+      Display_print0(dispHandle, 0, 0, "***ERROR***");
+      Display_print0(dispHandle, 2, 0, ">> ICALL ABORT!");
+      HAL_ASSERT_SPINLOCK;
+      break;
+
+    default:
+      Display_print0(dispHandle, 0, 0, "***ERROR***");
+      Display_print0(dispHandle, 2, 0, ">> DEFAULT SPINLOCK!");
+      HAL_ASSERT_SPINLOCK;
+  }
+*/
 
   return;
 }

simplelink/ble_sdk_2_02_02_25/src/profiles/simple_profile/cc26xx/simple_gatt_profile.c

@@ -9,7 +9,7 @@
  Target Device: CC2650, CC2640
 
  ******************************************************************************
-
+ 
  Copyright (c) 2010-2018, Texas Instruments Incorporated
  All rights reserved.
 
@@ -135,6 +135,7 @@ static simpleProfileCBs_t *simpleProfile_AppCBs = NULL;
 // Simple Profile Service attribute
 static CONST gattAttrType_t simpleProfileService = { ATT_BT_UUID_SIZE, simpleProfileServUUID };
 
+
 // Simple Profile Characteristic 1 Properties
 // static uint8 simpleProfileChar1Props = GATT_PROP_READ | GATT_PROP_WRITE;
 /*user insert*/
@@ -143,12 +144,13 @@ static uint8 simpleProfileChar1Props = GATT_PROP_READ;
 // Characteristic 1 Value
 // static uint8 simpleProfileChar1 = 0;
 /*user insert*/
-#define SIMPLEPROFILE_CHAR1_LEN 20
 static uint8 simpleProfileChar1[SIMPLEPROFILE_CHAR1_LEN] = {0};
 
+
 // Simple Profile Characteristic 1 User Description
 static uint8 simpleProfileChar1UserDesp[17] = "Characteristic 1";
 
+
 // Simple Profile Characteristic 2 Properties
 static uint8 simpleProfileChar2Props = GATT_PROP_READ;
 
@@ -157,9 +159,11 @@ static uint8 simpleProfileChar2Props = GATT_PROP_READ;
 /*user insert*/
 static uint8 simpleProfileChar2[SIMPLEPROFILE_CHAR2_LEN] = {0};
 
+
 // Simple Profile Characteristic 2 User Description
 static uint8 simpleProfileChar2UserDesp[17] = "Characteristic 2";
 
+
 // Simple Profile Characteristic 3 Properties
 static uint8 simpleProfileChar3Props = GATT_PROP_WRITE;
 
@@ -168,9 +172,11 @@ static uint8 simpleProfileChar3Props = GATT_PROP_WRITE;
 /*user insert*/
 static uint8 simpleProfileChar3[SIMPLEPROFILE_CHAR3_LEN] = {0};
 
+
 // Simple Profile Characteristic 3 User Description
 static uint8 simpleProfileChar3UserDesp[17] = "Characteristic 3";
 
+
 // Simple Profile Characteristic 4 Properties
 static uint8 simpleProfileChar4Props = GATT_PROP_NOTIFY;
 
@@ -179,6 +185,7 @@ static uint8 simpleProfileChar4Props = GATT_PROP_NOTIFY;
 /*user insert*/
 static uint8 simpleProfileChar4[SIMPLEPROFILE_CHAR4_LEN] = {0};
 
+
 // Simple Profile Characteristic 4 Configuration Each client has its own
 // instantiation of the Client Characteristic Configuration. Reads of the
 // Client Characteristic Configuration only shows the configuration for
@@ -188,6 +195,7 @@ static gattCharCfg_t *simpleProfileChar4Config;
 // Simple Profile Characteristic 4 User Description
 static uint8 simpleProfileChar4UserDesp[17] = "Characteristic 4";
 
+
 // Simple Profile Characteristic 5 Properties
 static uint8 simpleProfileChar5Props = GATT_PROP_READ;
 
@@ -222,17 +230,17 @@ static gattAttribute_t simpleProfileAttrTbl[SERVAPP_NUM_ATTR_SUPPORTED] =
       // Characteristic Value 1
       {
         { ATT_BT_UUID_SIZE, simpleProfilechar1UUID },
-      	GATT_PERMIT_READ,
-      	0,
-      	simpleProfileChar1
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar1
       },
 
       // Characteristic 1 User Description
       {
         { ATT_BT_UUID_SIZE, charUserDescUUID },
-    	GATT_PERMIT_READ,
-    	0,
-    	simpleProfileChar1UserDesp
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar1UserDesp
       },
 
     // Characteristic 2 Declaration
@@ -246,114 +254,112 @@ static gattAttribute_t simpleProfileAttrTbl[SERVAPP_NUM_ATTR_SUPPORTED] =
       // Characteristic Value 2
       {
         { ATT_BT_UUID_SIZE, simpleProfilechar2UUID },
-	    GATT_PERMIT_READ,
-	    0,
-	    simpleProfileChar2
-	  },
-	  
-	  // Characteristic 2 User Description
-	  {
-	    { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-	    GATT_PERMIT_READ, 
-	    0, 
-	    simpleProfileChar2UserDesp
-	  },
-
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar2
+      },
 
+      // Characteristic 2 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar2UserDesp
+      },
 
     // Characteristic 3 Declaration
     {
-      { ATT_BT_UUID_SIZE, characterUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
+      { ATT_BT_UUID_SIZE, characterUUID },
+      GATT_PERMIT_READ,
+      0,
       &simpleProfileChar3Props
     },
 
-    // Characteristic Value 3
-    {
-      { ATT_BT_UUID_SIZE, simpleProfilechar3UUID }, 
-      GATT_PERMIT_WRITE, 
-      0, 
-      simpleProfileChar3
-    },
+      // Characteristic Value 3
+      {
+        { ATT_BT_UUID_SIZE, simpleProfilechar3UUID },
+        GATT_PERMIT_WRITE,
+        0,
+        simpleProfileChar3
+      },
 
-    // Characteristic 3 User Description
-    {
-      { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
-      simpleProfileChar3UserDesp
-    },
+      // Characteristic 3 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar3UserDesp
+      },
 
     // Characteristic 4 Declaration
     {
-      { ATT_BT_UUID_SIZE, characterUUID }, 
-      GATT_PERMIT_READ, 
+      { ATT_BT_UUID_SIZE, characterUUID },
+      GATT_PERMIT_READ,
       0,
       &simpleProfileChar4Props
     },
 
-    // Characteristic Value 4
-    {
-      { ATT_BT_UUID_SIZE, simpleProfilechar4UUID }, 
-      0, 
-      0, 
-      simpleProfileChar4
-    },
+      // Characteristic Value 4
+      {
+        { ATT_BT_UUID_SIZE, simpleProfilechar4UUID },
+        0,
+        0,
+        simpleProfileChar4
+      },
 
-    // Characteristic 4 configuration
-    {
-      { ATT_BT_UUID_SIZE, clientCharCfgUUID }, 
-      GATT_PERMIT_READ | GATT_PERMIT_WRITE, 
-      0, 
-      (uint8 *)&simpleProfileChar4Config
-    },
+      // Characteristic 4 configuration
+      {
+        { ATT_BT_UUID_SIZE, clientCharCfgUUID },
+        GATT_PERMIT_READ | GATT_PERMIT_WRITE,
+        0,
+        (uint8 *)&simpleProfileChar4Config
+      },
 
-    // Characteristic 4 User Description
-    {
-      { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
-      simpleProfileChar4UserDesp
-    },
+      // Characteristic 4 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar4UserDesp
+      },
 
     // Characteristic 5 Declaration
     {
-      { ATT_BT_UUID_SIZE, characterUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
+      { ATT_BT_UUID_SIZE, characterUUID },
+      GATT_PERMIT_READ,
+      0,
       &simpleProfileChar5Props
     },
 
-    // Characteristic Value 5
-    {
-      { ATT_BT_UUID_SIZE, simpleProfilechar5UUID }, 
-      GATT_PERMIT_AUTHEN_READ, 
-      0, 
-      simpleProfileChar5
-    },
+      // Characteristic Value 5
+      {
+        { ATT_BT_UUID_SIZE, simpleProfilechar5UUID },
+        GATT_PERMIT_AUTHEN_READ,
+        0,
+        simpleProfileChar5
+      },
 
-    // Characteristic 5 User Description
-    {
-      { ATT_BT_UUID_SIZE, charUserDescUUID }, 
-      GATT_PERMIT_READ, 
-      0, 
-      simpleProfileChar5UserDesp
-    },
+      // Characteristic 5 User Description
+      {
+        { ATT_BT_UUID_SIZE, charUserDescUUID },
+        GATT_PERMIT_READ,
+        0,
+        simpleProfileChar5UserDesp
+      },
 };
 
 /*********************************************************************
  * LOCAL FUNCTIONS
  */
 static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle,
-										  gattAttribute_t *pAttr,
-										  uint8_t *pValue, uint16_t *pLen,
-										  uint16_t offset, uint16_t maxLen,
-										  uint8_t method);
+                                          gattAttribute_t *pAttr,
+                                          uint8_t *pValue, uint16_t *pLen,
+                                          uint16_t offset, uint16_t maxLen,
+                                          uint8_t method);
 static bStatus_t simpleProfile_WriteAttrCB(uint16_t connHandle,
-										   gattAttribute_t *pAttr,
-										   uint8_t *pValue, uint16_t len,
-										   uint16_t offset, uint8_t method);
+                                           gattAttribute_t *pAttr,
+                                           uint8_t *pValue, uint16_t len,
+                                           uint16_t offset, uint8_t method);
 
 /*********************************************************************
  * PROFILE CALLBACKS
@@ -395,7 +401,7 @@ bStatus_t SimpleProfile_AddService( uint32 services )
 
   // Allocate Client Characteristic Configuration table
   simpleProfileChar4Config = (gattCharCfg_t *)ICall_malloc( sizeof(gattCharCfg_t) *
-  														    linkDBNumConns );
+                                                            linkDBNumConns );
   if ( simpleProfileChar4Config == NULL )
   {
     return ( bleMemAllocError );
@@ -408,9 +414,9 @@ bStatus_t SimpleProfile_AddService( uint32 services )
   {
     // Register GATT attribute list and CBs with GATT Server App
     status = GATTServApp_RegisterService( simpleProfileAttrTbl,
-    									  GATT_NUM_ATTRS( simpleProfileAttrTbl ),
-    									  GATT_MAX_ENCRYPT_KEY_SIZE,
-    									  &simpleProfileCBs );
+                                          GATT_NUM_ATTRS( simpleProfileAttrTbl ),
+                                          GATT_MAX_ENCRYPT_KEY_SIZE,
+                                          &simpleProfileCBs );
   }
   else
   {
@@ -468,7 +474,7 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       {
         memcpy(simpleProfileChar1, value, len);
         // simpleProfileChar1 = *((uint8*)value);
-      } 
+      }
       else
       {
         ret = bleInvalidRange;
@@ -482,7 +488,7 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
         // simpleProfileChar2 = *((uint8*)value);
       }
       else
-	  {
+      {
         ret = bleInvalidRange;
       }
       break;
@@ -491,7 +497,8 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       if (len <= SIMPLEPROFILE_CHAR3_LEN) 
       {
         memcpy(simpleProfileChar3, value, len);
-      } 
+        // simpleProfileChar3 = *((uint8*)value);
+      }
       else
       {
         ret = bleInvalidRange;
@@ -502,9 +509,12 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       if (len <= SIMPLEPROFILE_CHAR4_LEN)
       {
         memcpy(simpleProfileChar4, value, len);
+        // simpleProfileChar4 = *((uint8*)value);
 
         // See if Notification has been enabled
-        GATTServApp_ProcessCharCfg(simpleProfileChar4Config, simpleProfileChar4, FALSE, simpleProfileAttrTbl, GATT_NUM_ATTRS(simpleProfileAttrTbl), INVALID_TASK_ID, simpleProfile_ReadAttrCB);
+        GATTServApp_ProcessCharCfg( simpleProfileChar4Config, simpleProfileChar4, FALSE,
+                                    simpleProfileAttrTbl, GATT_NUM_ATTRS( simpleProfileAttrTbl ),
+                                    INVALID_TASK_ID, simpleProfile_ReadAttrCB );
       }
       else
       {
@@ -513,8 +523,9 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
       break;
 
     case SIMPLEPROFILE_CHAR5:
-      if (len == SIMPLEPROFILE_CHAR5_LEN) {
-        VOID memcpy(simpleProfileChar5, value, SIMPLEPROFILE_CHAR5_LEN);
+      if ( len == SIMPLEPROFILE_CHAR5_LEN )
+      {
+        VOID memcpy( simpleProfileChar5, value, SIMPLEPROFILE_CHAR5_LEN );
       }
       else
       {
@@ -543,37 +554,41 @@ bStatus_t SimpleProfile_SetParameter( uint8 param, uint8 len, void *value )
  *
  * @return  bStatus_t
  */
-bStatus_t SimpleProfile_GetParameter(uint8 param, void *value) {
-    bStatus_t ret = SUCCESS;
-    switch (param) {
+bStatus_t SimpleProfile_GetParameter( uint8 param, void *value )
+{
+  bStatus_t ret = SUCCESS;
+  switch ( param )
+  {
     case SIMPLEPROFILE_CHAR1:
-        memcpy(value, simpleProfileChar1, SIMPLEPROFILE_CHAR1_LEN);
-        //      *((uint8*)value) = simpleProfileChar1;
-        break;
+      memcpy(value, simpleProfileChar1, SIMPLEPROFILE_CHAR1_LEN);
+      // *((uint8*)value) = simpleProfileChar1;
+      break;
 
     case SIMPLEPROFILE_CHAR2:
-        memcpy(value, simpleProfileChar2, SIMPLEPROFILE_CHAR2_LEN);
-        //      *((uint8*)value) = simpleProfileChar2;
-        break;
+      memcpy(value, simpleProfileChar2, SIMPLEPROFILE_CHAR2_LEN);
+      // *((uint8*)value) = simpleProfileChar2;
+      break;
 
     case SIMPLEPROFILE_CHAR3:
-        memcpy(value, simpleProfileChar3, SIMPLEPROFILE_CHAR3_LEN);
-        break;
+      memcpy(value, simpleProfileChar3, SIMPLEPROFILE_CHAR3_LEN);
+      // *((uint8*)value) = simpleProfileChar3;
+      break;
 
     case SIMPLEPROFILE_CHAR4:
-        memcpy(value, simpleProfileChar4, SIMPLEPROFILE_CHAR4_LEN);
-        break;
+      memcpy(value, simpleProfileChar4, SIMPLEPROFILE_CHAR4_LEN);
+      // *((uint8*)value) = simpleProfileChar4;
+      break;
 
     case SIMPLEPROFILE_CHAR5:
-        VOID memcpy(value, simpleProfileChar5, SIMPLEPROFILE_CHAR5_LEN);
-        break;
+      VOID memcpy( value, simpleProfileChar5, SIMPLEPROFILE_CHAR5_LEN );
+      break;
 
     default:
-        ret = INVALIDPARAMETER;
-        break;
-    }
+      ret = INVALIDPARAMETER;
+      break;
+  }
 
-    return (ret);
+  return ( ret );
 }
 
 /*********************************************************************
@@ -591,62 +606,65 @@ bStatus_t SimpleProfile_GetParameter(uint8 param, void *value) {
  *
  * @return      SUCCESS, blePending or Failure
  */
-static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle, gattAttribute_t *pAttr, uint8_t *pValue, uint16_t *pLen, uint16_t offset, uint16_t maxLen, uint8_t method) {
-    bStatus_t status = SUCCESS;
+static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle,
+                                          gattAttribute_t *pAttr,
+                                          uint8_t *pValue, uint16_t *pLen,
+                                          uint16_t offset, uint16_t maxLen,
+                                          uint8_t method)
+{
+  bStatus_t status = SUCCESS;
 
-    // Make sure it's not a blob operation (no attributes in the profile are long)
-    if (offset > 0) {
-        return (ATT_ERR_ATTR_NOT_LONG);
+  // Make sure it's not a blob operation (no attributes in the profile are long)
+  if ( offset > 0 )
+  {
+    return ( ATT_ERR_ATTR_NOT_LONG );
+  }
+
+  if ( pAttr->type.len == ATT_BT_UUID_SIZE )
+  {
+    // 16-bit UUID
+    uint16 uuid = BUILD_UINT16( pAttr->type.uuid[0], pAttr->type.uuid[1]);
+    switch ( uuid )
+    {
+      // No need for "GATT_SERVICE_UUID" or "GATT_CLIENT_CHAR_CFG_UUID" cases;
+      // gattserverapp handles those reads
+
+      // characteristics 1 and 2 have read permissions
+      // characteritisc 3 does not have read permissions; therefore it is not
+      //   included here
+      // characteristic 4 does not have read permissions, but because it
+      //   can be sent as a notification, it is included here
+      case SIMPLEPROFILE_CHAR1_UUID:
+        *pLen = SIMPLEPROFILE_CHAR1_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR1_LEN );
+      case SIMPLEPROFILE_CHAR2_UUID:
+              *pLen = SIMPLEPROFILE_CHAR2_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR2_LEN );
+      case SIMPLEPROFILE_CHAR4_UUID:
+        *pLen = SIMPLEPROFILE_CHAR4_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR4_LEN );
+        break;
+
+      case SIMPLEPROFILE_CHAR5_UUID:
+        *pLen = SIMPLEPROFILE_CHAR5_LEN;
+        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR5_LEN );
+        break;
+
+      default:
+        // Should never get here! (characteristics 3 and 4 do not have read permissions)
+        *pLen = 0;
+        status = ATT_ERR_ATTR_NOT_FOUND;
+        break;
     }
+  }
+  else
+  {
+    // 128-bit UUID
+    *pLen = 0;
+    status = ATT_ERR_INVALID_HANDLE;
+  }
 
-    if (pAttr->type.len == ATT_BT_UUID_SIZE) {
-        // 16-bit UUID
-        uint16 uuid = BUILD_UINT16(pAttr->type.uuid[0], pAttr->type.uuid[1]);
-        switch (uuid) {
-        // No need for "GATT_SERVICE_UUID" or "GATT_CLIENT_CHAR_CFG_UUID" cases;
-        // gattserverapp handles those reads
-
-        // characteristics 1 and 2 have read permissions
-        // characteritisc 3 does not have read permissions; therefore it is not
-        //   included here
-        // characteristic 4 does not have read permissions, but because it
-        //   can be sent as a notification, it is included here
-        case SIMPLEPROFILE_CHAR1_UUID:
-            *pLen = SIMPLEPROFILE_CHAR1_LEN;
-            VOID memcpy(pValue, pAttr->pValue, SIMPLEPROFILE_CHAR1_LEN);
-            break;
-
-        case SIMPLEPROFILE_CHAR2_UUID:
-            //        *pLen = 1;
-            //        pValue[0] = *pAttr->pValue;
-
-            *pLen = SIMPLEPROFILE_CHAR2_LEN;
-            VOID memcpy(pValue, pAttr->pValue, SIMPLEPROFILE_CHAR2_LEN);
-            break;
-
-        case SIMPLEPROFILE_CHAR4_UUID:
-            *pLen = SIMPLEPROFILE_CHAR4_LEN;
-            VOID memcpy(pValue, pAttr->pValue, SIMPLEPROFILE_CHAR4_LEN);
-            break;
-            //      case SIMPLEPROFILE_CHAR5_UUID:
-
-            //        *pLen = SIMPLEPROFILE_CHAR5_LEN;
-            //        VOID memcpy( pValue, pAttr->pValue, SIMPLEPROFILE_CHAR5_LEN );
-            //        break;
-
-        default:
-            // Should never get here! (characteristics 3 and 4 do not have read permissions)
-            *pLen  = 0;
-            status = ATT_ERR_ATTR_NOT_FOUND;
-            break;
-        }
-    } else {
-        // 128-bit UUID
-        *pLen  = 0;
-        status = ATT_ERR_INVALID_HANDLE;
-    }
-
-    return (status);
+  return ( status );
 }
 
 /*********************************************************************
@@ -663,83 +681,83 @@ static bStatus_t simpleProfile_ReadAttrCB(uint16_t connHandle, gattAttribute_t *
  *
  * @return  SUCCESS, blePending or Failure
  */
-static bStatus_t simpleProfile_WriteAttrCB(uint16_t connHandle, gattAttribute_t *pAttr, uint8_t *pValue, uint16_t len, uint16_t offset, uint8_t method) {
-    bStatus_t status    = SUCCESS;
-    uint8     notifyApp = 0xFF;
+static bStatus_t simpleProfile_WriteAttrCB(uint16_t connHandle,
+                                           gattAttribute_t *pAttr,
+                                           uint8_t *pValue, uint16_t len,
+                                           uint16_t offset, uint8_t method)
+{
+  bStatus_t status = SUCCESS;
+  uint8 notifyApp = 0xFF;
 
-    if (pAttr->type.len == ATT_BT_UUID_SIZE) {
-        // 16-bit UUID
-        uint16 uuid = BUILD_UINT16(pAttr->type.uuid[0], pAttr->type.uuid[1]);
-        switch (uuid) {
-            // Validate the value
-            // Make sure it's not a blob oper
-            /*
-            if ( offset == 0 )
-            {
-              if ( len != 1 )
-              {
-                status = ATT_ERR_INVALID_VALUE_SIZE;
-              }
-            }
-            else
-            {
-              status = ATT_ERR_ATTR_NOT_LONG;
-            }
+  if ( pAttr->type.len == ATT_BT_UUID_SIZE )
+  {
+    // 16-bit UUID
+    uint16 uuid = BUILD_UINT16( pAttr->type.uuid[0], pAttr->type.uuid[1]);
+    switch ( uuid )
+    {
+      case SIMPLEPROFILE_CHAR1_UUID:
+      case SIMPLEPROFILE_CHAR3_UUID:
 
-            //Write the value
-            if ( status == SUCCESS )
-            {
-              uint8 *pCurValue = (uint8 *)pAttr->pValue;
-              *pCurValue = pValue[0];
-
-              if( pAttr->pValue == &simpleProfileChar1 )
-              {
-                notifyApp = SIMPLEPROFILE_CHAR1;
-              }
-            }
-
-            break;
-            */
-        case SIMPLEPROFILE_CHAR3_UUID:
-            if (offset == 0) {
-                if (len > SIMPLEPROFILE_CHAR3_LEN) {
-                    status = ATT_ERR_INVALID_VALUE_SIZE;
-                }
-            } else {
-                status = ATT_ERR_ATTR_NOT_LONG;
-            }
-
-            // Write the value
-            if (status == SUCCESS) {
-                // Copy pValue into the variable we point to from the attribute table.
-                memcpy(pAttr->pValue + offset, pValue, len);
-                memset(pAttr->pValue + len, 0, SIMPLEPROFILE_CHAR3_LEN - len);
-
-                if (pAttr->pValue == simpleProfileChar3) {
-                    notifyApp = SIMPLEPROFILE_CHAR3;
-                }
-            }
-
-            break;
-        case GATT_CLIENT_CHAR_CFG_UUID:
-            status = GATTServApp_ProcessCCCWriteReq(connHandle, pAttr, pValue, len, offset, GATT_CLIENT_CFG_NOTIFY);
-            break;
-        default:
-            // Should never get here! (characteristics 2 and 4 do not have write permissions)
-            status = ATT_ERR_ATTR_NOT_FOUND;
-            break;
+        //Validate the value
+        // Make sure it's not a blob oper
+        if ( offset == 0 )
+        {
+          if ( len > SIMPLEPROFILE_CHAR3_LEN )
+          {
+            status = ATT_ERR_INVALID_VALUE_SIZE;
+          }
+        }
+        else
+        {
+          status = ATT_ERR_ATTR_NOT_LONG;
         }
-    } else {
-        // 128-bit UUID
-        status = ATT_ERR_INVALID_HANDLE;
-    }
 
-    // If a characteristic value changed then callback function to notify application of change
-    if ((notifyApp != 0xFF) && simpleProfile_AppCBs && simpleProfile_AppCBs->pfnSimpleProfileChange) {
-        simpleProfile_AppCBs->pfnSimpleProfileChange(notifyApp);
-    }
+        //Write the value
+        if ( status == SUCCESS )
+        {
+          uint8 *pCurValue = (uint8 *)pAttr->pValue;
+          *pCurValue = pValue[0];
 
-    return (status);
+          // Copy pValue into the variable we point to from the attribute table.
+          memcpy(pAttr->pValue + offset, pValue, len);
+          memset(pAttr->pValue + len, 0, SIMPLEPROFILE_CHAR3_LEN - len);
+
+          if( pAttr->pValue == simpleProfileChar1 )
+          {
+            notifyApp = SIMPLEPROFILE_CHAR1;
+          }
+          else
+          {
+            notifyApp = SIMPLEPROFILE_CHAR3;
+          }
+        }
+
+        break;
+
+      case GATT_CLIENT_CHAR_CFG_UUID:
+        status = GATTServApp_ProcessCCCWriteReq( connHandle, pAttr, pValue, len,
+                                                 offset, GATT_CLIENT_CFG_NOTIFY );
+        break;
+
+      default:
+        // Should never get here! (characteristics 2 and 4 do not have write permissions)
+        status = ATT_ERR_ATTR_NOT_FOUND;
+        break;
+    }
+  }
+  else
+  {
+    // 128-bit UUID
+    status = ATT_ERR_INVALID_HANDLE;
+  }
+
+  // If a characteristic value changed then callback function to notify application of change
+  if ( (notifyApp != 0xFF ) && simpleProfile_AppCBs && simpleProfile_AppCBs->pfnSimpleProfileChange )
+  {
+    simpleProfile_AppCBs->pfnSimpleProfileChange( notifyApp );
+  }
+
+  return ( status );
 }
 
 /*********************************************************************

simplelink/ble_sdk_2_02_02_25/src/profiles/simple_profile/simple_gatt_profile.h

@@ -56,7 +56,7 @@ extern "C"
 /*********************************************************************
  * INCLUDES
  */
-
+// #include "application_config/application_config.h"
 /*********************************************************************
  * CONSTANTS
  */
@@ -81,12 +81,24 @@ extern "C"
 // Simple Keys Profile Services bit fields
 #define SIMPLEPROFILE_SERVICE               0x00000001
 
+#ifndef CUSTOM_GATT_LENGTH
 // Length of Characteristic 5 in bytes
 #define SIMPLEPROFILE_CHAR5_LEN           5
-/*user insert*/
-#define SIMPLEPROFILE_CHAR4_LEN           40
+#define SIMPLEPROFILE_CHAR4_LEN           20
 #define SIMPLEPROFILE_CHAR3_LEN           20
 #define SIMPLEPROFILE_CHAR2_LEN           20
+#define SIMPLEPROFILE_CHAR1_LEN           20
+#else
+/*user insert*/
+#define SIMPLEPROFILE_CHAR5_LEN           5
+#define SIMPLEPROFILE_CHAR4_LEN           BLE_DAT_BUFF_SIZE
+#define SIMPLEPROFILE_CHAR3_LEN           BLE_INS_BUFF_SIZE
+#define SIMPLEPROFILE_CHAR2_LEN           BLE_CIS_BUFF_SIZE
+#define SIMPLEPROFILE_CHAR1_LEN           20
+#define BLE_CIS_BUFF_CHAR                 SIMPLEPROFILE_CHAR2
+#define BLE_INS_BUFF_CHAR                 SIMPLEPROFILE_CHAR3
+#define BLE_DAT_BUFF_CHAR                 SIMPLEPROFILE_CHAR4
+#endif
 /*********************************************************************
  * TYPEDEFS
  */