config: switch project configuration to MMM v1.0

app_config.h

@@ -109,7 +109,8 @@ extern "C"
 #define DEF_ELITE_EDC_V2_0                          0x00020109
 #define DEF_ELITE_PEL_V2_0                          0x00070001
 #define DEF_ELITE_CPG_V1_1                          0x00080001
-#define DEF_ELITE_MODEL                             DEF_ELITE_DEV
+#define DEF_ELITE_MMM_V1_0                          0x00090001
+#define DEF_ELITE_MODEL                             DEF_ELITE_MMM_V1_0
 
 #define DEF_ELITE_DEMO_W_SOFTDEVICE                 0
 
@@ -148,6 +149,8 @@ extern "C"
 
 #define DEF_USBD_ENABLED        1
 
+#define DEF_UART_ENABLED        0
+
 #elif (DEF_ELITE_MODEL == DEF_ELITE_EDC_V2_0)
 #define ELITE_DEVICE_NAME       "Elite-EDC"
 #define ELITE_HW_NAME           "Elite-EDCv2.0"
@@ -183,6 +186,8 @@ extern "C"
 
 #define DEF_USBD_ENABLED        1
 
+#define DEF_UART_ENABLED        0
+
 #elif (DEF_ELITE_MODEL == DEF_ELITE_PEL_V2_0)
 #define BOARD_IOPH              1
 #define BOARD_IOPL              0
@@ -222,6 +227,8 @@ extern "C"
 
 #define DEF_USBD_ENABLED        1
 
+#define DEF_UART_ENABLED        0
+
 #elif (DEF_ELITE_MODEL == DEF_ELITE_CPG_V1_1)
 #define ELITE_DEVICE_NAME       "Elite-CPG"
 #define ELITE_HW_NAME           "Elite-CPGv1.1"
@@ -257,6 +264,45 @@ extern "C"
 
 #define DEF_USBD_ENABLED        1
 
+#define DEF_UARTE_ENABLED       0
+
+#elif (DEF_ELITE_MODEL == DEF_ELITE_MMM_V1_0)
+#define ELITE_DEVICE_NAME       "Elite-MMM"
+#define ELITE_HW_NAME           "Elite-MMM"
+#define MAJOR_PRODUCT_NUMBER    0
+#define MINOR_PRODUCT_NUMBER    9
+#define MAJOR_VERSION_NUMBER    0
+#define MINOR_VERSION_NUMBER    1
+
+#define DEF_TW1508_ENABLED      0
+
+#define DEF_LED_COUNT           0
+#define DEF_LED_DRV_ENABLED     0
+#define DEF_APA102_2020_ENABLED 0
+
+#define DEF_ADC_DRV_ENABLED     0
+#define DEF_ADS8691_ENABLED     0
+#define DEF_BULTIN_ADC_ENABED   0
+
+#define DEF_DAC_DRV_ENABLED     0
+#define DEF_MAX5136_ENABLED     0
+
+#define DEF_SW_DRV_ENABLED      0
+#define DEF_MAX14802_ENABLED    0
+#define DEF_ADGS1412_ENABLED    0
+
+#define DEF_FS_ENABLED          0
+#define DEF_FS_RTT_DIR          0
+#define DEF_GD25D10C_ENABLED    0
+
+#define DEF_BTN_ENABLED         0
+
+#define DEF_RTT_JSCOP_ENABLED   0
+
+#define DEF_USBD_ENABLED        1
+
+#define DEF_UARTE_ENABLED       1
+
 #endif
 
 #define BLE_ELITE_SRV_ENABLED   1
@@ -294,7 +340,6 @@ extern "C"
 #define BLE_UART_SRV_ENABLED                       1
 #define BLE_UART_OBSERVER_PRIO                     3
 #define NRF_UARTE_ENABLED                          1
-#define DEF_UARTE_ENABLED                          1
 
 // DFU
 #define NRF_DFU_TRANSPORT_BLE                      1

bmd380_peripheral.vcxproj

@@ -205,6 +205,7 @@
     <ClCompile Include="dac_drv.c" />
     <ClCompile Include="elite_dev.c" />
     <ClCompile Include="edc20_cycle_iv_mode.c" />
+    <ClCompile Include="elite_mmm.c" />
     <ClCompile Include="fs.c" />
     <ClCompile Include="gd25d10c.c" />
     <ClCompile Include="le_uart_srv.c" />
@@ -233,6 +234,7 @@
     <ClCompile Include="uart.drv.c" />
     <ClCompile Include="usbd.c" />
     <ClCompile Include="usbd_dfu_trigger.c" />
+    <ClInclude Include="elite_mmm.h" />
     <ClInclude Include="le_uart_srv.h" />
     <ClInclude Include="max14802.h" />
     <ClInclude Include="pel20_io.h" />

elite.c

@@ -8,6 +8,8 @@
 #include "pel.h"
 #elif (DEF_ELITE_MODEL == DEF_ELITE_CPG_V1_1)
 #include "cpg.h"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_MMM_V1_0)
+#include "elite_mmm.h"
 #else
 #error "Unknown DEF_ELITE_MODEL"
 #endif
@@ -109,6 +111,8 @@ void elite_init(void)
     p_instance = pel_init();
 #elif (DEF_ELITE_MODEL == DEF_ELITE_CPG_V1_1)
     p_instance = cpg_init();
+#elif (DEF_ELITE_MODEL == DEF_ELITE_MMM_V1_0)
+    p_instance = mmm_init();
 #else
 #error "Unknown DEF_ELITE_MODEL"
 #endif

elite_board.h

@@ -23,6 +23,7 @@ extern "C"
 #include "pel20_io.h"
 #elif (DEF_ELITE_MODEL == DEF_ELITE_CPG_V1_1)
 #include "cpg11_io.h"
+#elif (DEF_ELITE_MODEL == DEF_ELITE_MMM_V1_0)
 #else
 #error "Not implemented xxx_io.h"
 #endif

elite_mmm.c

@@ -0,0 +1,256 @@
+#include "elite_mmm.h"
+
+#include "nrf_gpio.h"
+#include "nrf_log.h"
+
+#if (DEF_ELITE_MODEL == DEF_ELITE_MMM_V1_0)
+
+#define VERSION_DATE_YEAR   25
+#define VERSION_DATE_MONTH  6
+#define VERSION_DATE_DAY    4
+#define VERSION_DATE_HOUR   16
+#define VERSION_DATE_MINUTE 44
+static void cis_version(uint8_t *ins, uint16_t size)
+{
+    NRF_LOG_INFO("%s", __FUNCTION__);
+    uint8_t cis_ver[] = {
+        CIS_VERSION,
+        VERSION_DATE_YEAR,
+        VERSION_DATE_MONTH,
+        VERSION_DATE_DAY,
+        VERSION_DATE_HOUR,
+        VERSION_DATE_MINUTE,
+    };
+    extern ret_code_t le_data_update(uint8_t * p_value, uint16_t len);
+    le_data_update((void *)cis_ver, sizeof(cis_ver));
+}
+
+static void vis_rst(uint8_t *ins, uint16_t size)
+{
+    NRF_LOG_INFO("%s", __FUNCTION__);
+}
+
+#define UNDEF_GPIO 0xFFFFFFFF
+
+// The GPIO corresponding to the pin
+const uint32_t pin_to_gpio_table[] = {
+    [6]  = NRF_GPIO_PIN_MAP(0, 22),
+    [8]  = NRF_GPIO_PIN_MAP(0, 25),
+    [9]  = NRF_GPIO_PIN_MAP(0, 19),
+    [10] = NRF_GPIO_PIN_MAP(0, 21),
+    [11] = NRF_GPIO_PIN_MAP(1, 00),
+    [12] = NRF_GPIO_PIN_MAP(0, 18),
+    [13] = NRF_GPIO_PIN_MAP(0, 17),
+    [14] = NRF_GPIO_PIN_MAP(0, 20),
+    [16] = NRF_GPIO_PIN_MAP(0, 14),
+    [17] = NRF_GPIO_PIN_MAP(0, 13),
+    [18] = NRF_GPIO_PIN_MAP(0, 11),
+    [20] = NRF_GPIO_PIN_MAP(0, 15),
+    [25] = NRF_GPIO_PIN_MAP(1, 8),
+    [26] = NRF_GPIO_PIN_MAP(0, 12),
+    [27] = NRF_GPIO_PIN_MAP(0, 7),
+    [28] = NRF_GPIO_PIN_MAP(1, 9),
+    [29] = NRF_GPIO_PIN_MAP(0, 8),
+    [30] = NRF_GPIO_PIN_MAP(0, 6),
+    [31] = NRF_GPIO_PIN_MAP(0, 5),
+    [32] = NRF_GPIO_PIN_MAP(0, 27),
+    [33] = NRF_GPIO_PIN_MAP(0, 26),
+    [34] = NRF_GPIO_PIN_MAP(0, 4),
+    [36] = NRF_GPIO_PIN_MAP(0, 1),
+    [37] = NRF_GPIO_PIN_MAP(0, 29),
+    [38] = NRF_GPIO_PIN_MAP(0, 0),
+    [39] = NRF_GPIO_PIN_MAP(0, 31),
+    [40] = NRF_GPIO_PIN_MAP(1, 15),
+    [41] = NRF_GPIO_PIN_MAP(0, 2),
+    [42] = NRF_GPIO_PIN_MAP(0, 30),
+    [43] = NRF_GPIO_PIN_MAP(0, 28),
+    [44] = NRF_GPIO_PIN_MAP(1, 12),
+    [45] = NRF_GPIO_PIN_MAP(1, 14),
+    [46] = NRF_GPIO_PIN_MAP(0, 3),
+    [47] = NRF_GPIO_PIN_MAP(1, 13),
+    [48] = NRF_GPIO_PIN_MAP(1, 3),
+    [49] = NRF_GPIO_PIN_MAP(1, 10),
+    [50] = NRF_GPIO_PIN_MAP(1, 6),
+    [51] = NRF_GPIO_PIN_MAP(1, 11),
+    [52] = NRF_GPIO_PIN_MAP(0, 10),
+    [53] = NRF_GPIO_PIN_MAP(0, 9),
+    [59] = NRF_GPIO_PIN_MAP(1, 2),
+    [60] = NRF_GPIO_PIN_MAP(0, 24),
+    [61] = NRF_GPIO_PIN_MAP(0, 23),
+    [62] = NRF_GPIO_PIN_MAP(0, 16),
+};
+
+static uint32_t bmd380pins_convert_to_gpio(uint32_t pin)
+{
+    uint32_t gpio;
+
+    switch (pin)
+    {
+        case 6:
+        case 8:
+        case 9:
+        case 10:
+        case 11:
+        case 12:
+        case 13:
+        case 14:
+        case 16:
+        case 17:
+        case 18:
+        case 20:
+        case 25:
+        case 26:
+        case 27:
+        case 28:
+        case 29:
+        case 30:
+        case 31:
+        case 32:
+        case 33:
+        case 34:
+        case 36:
+        case 37:
+        case 38:
+        case 39:
+        case 40:
+        case 41:
+        case 42:
+        case 43:
+        case 44:
+        case 45:
+        case 46:
+        case 47:
+        case 48:
+        case 49:
+        case 50:
+        case 51:
+        case 52:
+        case 53:
+        case 59:
+        case 60:
+        case 61:
+        case 62:
+            gpio = pin_to_gpio_table[pin];
+            break;
+        default:
+            gpio = UNDEF_GPIO;
+            NRF_LOG_INFO("UNDEF_GPIO: pin %d can't convert to gpio number", pin);
+            break;
+    }
+
+    return gpio;
+}
+
+static void set_bmd380_pin_signal(uint32_t pin, uint32_t high_low)
+{
+    uint32_t gpio = bmd380pins_convert_to_gpio(pin);
+
+    if (gpio != UNDEF_GPIO)
+    {
+        nrf_gpio_cfg_output(gpio);
+        nrf_gpio_pin_write(gpio, high_low);
+        NRF_LOG_INFO("set pin %d (gpio %d) = %d", pin, gpio, high_low);
+    }
+}
+
+/*
+    dev_mode_gpio_function
+    (1)0x3000FFA000ppss
+            -func: set_bmd380_pin_signal
+            -pp: pin number     06h-3Fh
+                06h: P0.22_GPIO
+                08h: P0.25_GPIO
+                ......
+                3Eh: P0.16_GPIO
+            -ss: signal         00h-01h
+                00h: low
+                01h: high
+
+    (2)0x3000FFA001ss
+        -func: set_bmd380 all pin signal high/low
+        -ss: signal         00h-01h
+            00h: low
+            01h: high
+*/
+void dev_mode_gpio_function(uint8_t *ins)
+{
+    struct __PACKED
+    {
+        uint8_t id     : 4;
+        uint8_t        : 4;
+        uint16_t magic : 16;
+        uint8_t dev_opcode;
+        uint8_t gpio_function_opcode;
+        uint8_t param[];
+    } *p_ins = (void *)ins;
+
+    switch (p_ins->gpio_function_opcode)
+    {
+        case 0x00: {
+            uint32_t pin      = p_ins->param[0];
+            uint32_t high_low = p_ins->param[1];
+            set_bmd380_pin_signal(pin, high_low);
+            break;
+        }
+
+        case 0x01: {
+            uint32_t high_low    = p_ins->param[0];
+            uint32_t set_pin[44] = { 6, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 20, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 59, 60, 61, 62 };
+
+            for (int i = 0; i < sizeof(set_pin) / sizeof(set_pin[0]); i++)
+            {
+                set_bmd380_pin_signal(set_pin[i], high_low);
+            }
+            break;
+        }
+    }
+}
+
+#define MAGIC_NUM 0xFF00
+static void dev_mode(uint8_t *ins, uint16_t size)
+{
+    NRF_LOG_INFO("%s", __FUNCTION__);
+    struct __PACKED
+    {
+        uint8_t id     : 4;
+        uint8_t        : 4;
+        uint16_t magic : 16;
+        uint8_t opcode;
+        uint8_t param[];
+    } *p_ins = (void *)ins;
+
+    if (p_ins->magic != MAGIC_NUM)
+    {
+        return;
+    }
+
+    // TODO...
+    switch (p_ins->opcode)
+    {
+        case 0xA0:
+            dev_mode_gpio_function(ins);
+            break;
+
+        default:
+            break;
+    }
+}
+
+const elite_instance_t mmm_elite_instance = {
+    .cis_func = {
+                 [CIS_VERSION] = cis_version,
+                 },
+    .vis_func = {
+                 [VIS_RST] = vis_rst,
+                 },
+    .ris_func = {
+                 [DEV_MODE] = dev_mode,
+                 }
+};
+
+const elite_instance_t *mmm_init(void)
+{
+    return &mmm_elite_instance;
+}
+
+#endif /* !DEF_ELITE_MODEL */

elite_mmm.h

@@ -0,0 +1,18 @@
+#ifndef __ELITE_MMM_H__
+#define __ELITE_MMM_H__
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#include "app_config.h"
+#include "elite.h"
+
+    const elite_instance_t *mmm_init(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ! __ELITE_MMM_H__ */

le_uart_srv.c

@@ -27,10 +27,10 @@ extern "C"
 
 #if NRF_MODULE_ENABLED(BLE_UART_SRV)
 
-#define BLE_UUID_UART_SERVICE   0x0001 /**< The UUID of the Service. */
-#define BLE_UUID_UART_RX_CHAR   0x0002 /**< The UUID of the RX Characteristic. */
-#define BLE_UUID_UART_TX_CHAR   0x0003 /**< The UUID of the TX Characteristic. */
-#define BLE_UUID_UART_BAUD_CHAR 0x0004 /**< The UUID of the Baud Characteristic. */
+#define BLE_UUID_UART_SERVICE   0xFFF8 /**< The UUID of the Service. */
+#define BLE_UUID_UART_RX_CHAR   0xFFF9 /**< The UUID of the RX Characteristic. */
+#define BLE_UUID_UART_TX_CHAR   0xFFFA /**< The UUID of the TX Characteristic. */
+#define BLE_UUID_UART_BAUD_CHAR 0xFFFB /**< The UUID of the Baud Characteristic. */
 
 #define BLE_UART_BASE_UUID                                                                                 \
     {                                                                                                      \
@@ -197,20 +197,17 @@ static ret_code_t add_baud_characteristic(uint16_t uuid, uint8_t uuid_type, ble_
 void le_uart_srv_init(void)
 {
     ret_code_t err_code;
-    ble_uuid128_t nus_base_uuid = BLE_UART_BASE_UUID;
-    uint8_t uuid_type           = 0;
-    ble_uuid_t ble_uuid;
+    uint8_t uuid_type = 0;
 
     /**@snippet [Adding proprietary Service to the SoftDevice] */
 
-    // Add a custom base UUID.
-    err_code = sd_ble_uuid_vs_add(&nus_base_uuid, &uuid_type);
-    APP_ERROR_CHECK(err_code);
+    ble_uuid_t ble_uuid = {
+        .type = BLE_UUID_TYPE_BLE,
+        .uuid = BLE_UUID_UART_SERVICE,
+    };
 
     // Add the service.
-    ble_uuid.type = uuid_type;
-    ble_uuid.uuid = BLE_UUID_UART_SERVICE;
-    err_code      = sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY,
+    err_code = sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY,
                                         &ble_uuid,
                                         &ble_uart_context.service_handle);
     APP_ERROR_CHECK(err_code);

uart.drv.c

@@ -207,7 +207,7 @@ void uart_init(void)
     NRF_UARTE0->PSEL.RXD = UART_RX_PIN | (UARTE_PSEL_RXD_CONNECT_Connected << UARTE_PSEL_RXD_CONNECT_Pos);
     NRF_UARTE0->PSEL.CTS = 0;
     NRF_UARTE0->PSEL.RTS = 0;
-    NRF_UARTE0->CONFIG   = UARTE_CONFIG_STOP_Msk;
+    NRF_UARTE0->CONFIG   = 0;
     NRF_UARTE0->BAUDRATE = UARTE_BAUDRATE_BAUDRATE_Baud115200;
     NRF_UARTE0->ENABLE   = UARTE_ENABLE_ENABLE_Enabled;
 

uart_drv.h

@@ -16,9 +16,10 @@ extern "C"
     int uart_recv(void *p_data, uint32_t max_size);
     ret_code_t uart_set_baud(uint32_t baudrate);
 #else
-    #define uart_init()
-    #define uart_send(...) ;
-    #define uart_recv(...) ;
+#define uart_init()
+#define uart_send(...) ;
+#define uart_recv(...) ;
+#define uart_set_baud(...)
 #endif /* ! DEF_UARTE_ENABLED */
 
 #ifdef __cplusplus