a96cc2feb2
feat: update pattern_tab
2025-03-28 16:04:22 +08:00
a0245e4e46
config: switch project configuration to pel v2.0
2025-03-28 16:01:46 +08:00
55b86b8d8e
Merge branch 'dev/CPGv1.1/update_dev_mode' into develp
2025-03-28 15:55:48 +08:00
e2bfd77ffb
config: switch project configuration to DEF_ELITE_DEV
2025-03-28 15:55:06 +08:00
1ca945f900
style: organize code
2025-03-28 15:35:02 +08:00
0f3048ba31
refactor: refactor dev_mode_ctrl_electrodes_task
2025-03-28 15:24:21 +08:00
b561b86f3b
feat: 1. add a 1ms delay before and after controlling the ADPT GPIO in max14802_write
...
2. dev mode commands (except those already available to users) start with 3xxxFFFF
2025-03-28 09:45:14 +08:00
d62fc6dfc1
feat: update the gpio instruction in dev_mode
2025-03-25 16:36:06 +08:00
b976d5e21e
feat: update the electrode_switch instruction in dev_mode
2025-03-25 14:07:18 +08:00
872138137a
refactor: merge cpg.c and cpg11_dev_mode.c
2025-03-25 13:15:44 +08:00
832a5fc35b
fix: fix the error in exclude_io
2025-03-21 17:42:09 +08:00
d374045c8f
fix: fix error head file
2025-03-21 14:34:04 +08:00
c81bfcf250
config: switch project configuration to cpg v1.1
2025-03-21 14:32:45 +08:00
e9f0418f01
Merge branch 'dev/pel20/mode_done_flag' into develp
2025-03-18 15:38:58 +08:00
8c3cbd738f
config: switch project configuration to DEF_ELITE_DEV
2025-03-18 15:38:47 +08:00
ee99ff121b
feat: add mode_complete to allow mode to stop automatically for controller
2025-03-18 11:41:05 +08:00
92859cd662
feat: update scan_mode_notify_packet_t data
2025-03-17 16:36:13 +08:00
689c76acf5
config: switch project configuration to pel v2.0
2025-03-14 11:54:24 +08:00
7025f4973e
Merge branch 'dev/pel2.0/cali_mode_v2' into develp
2025-03-13 13:04:21 +08:00
efafe2b0ad
config: switch project configuration to DEF_ELITE_DEV
2025-03-13 13:04:11 +08:00
9cb18c7cea
feat: auto_scan_mode updated to scan based on pattern_id in descending order
2025-03-13 13:00:14 +08:00
a37f3b3dd7
config: switch project configuration to pel v2.0
2025-03-13 12:59:10 +08:00
31f3d051ca
Merge branch 'dev/pel2.0/cali_mode_v2' into develp
2025-03-13 10:00:55 +08:00
cb3e92b8c0
config: switch project configuration to DEF_ELITE_DEV
2025-03-13 10:00:38 +08:00
9f1f933b97
feat: updated all mode instruction
2025-03-13 10:00:12 +08:00
10d2cb6058
feat: new implementation for R_external_calibration_mode
2025-03-12 13:45:11 +08:00
0a690e5fe5
feat: update data transmission for auto scan mode and manual scan mode
...
packet_buf->val_1_f = 0
packet_buf->val_2_f = resistor_conductance
packet_buf->val_3_f = OUT value (V)
packet_buf->val_4_f = VCC value (V)
packet_buf->val_5_f = VEE value (V)
2025-03-11 17:22:01 +08:00
d96689fe2a
feat: modify the value of input_pin_tab
2025-03-11 17:03:02 +08:00
87b3e3a5a8
config: switch project configuration to pel v2.0
2025-03-10 10:55:13 +08:00
a18b58dd6f
Merge branch 'pel2.0/auto-scan-mode' into develop
2025-03-06 01:09:10 +08:00
5b3ef452e1
config: switch project configuration to DEF_ELITE_DEV
2025-03-06 01:08:50 +08:00
f3a746a6f4
update: optimize pel procedure
2025-03-06 01:08:39 +08:00
a8b4cb30af
update: refactor Auto-Scan mode and Manual-Scan mode.
2025-03-05 07:51:07 +08:00
f5789d10ce
feat: add asynchronous BLE event notification feature.
2025-03-05 07:00:14 +08:00
80d53d31df
fix: use pel_adc_convt_new_arrival() in auto_scan_mode_task() to control notification timing.
2025-03-05 07:00:13 +08:00
692635c37e
feat: add convt_new_arrival to pel_hw_t to indicate ADC conversion update
2025-03-05 07:00:13 +08:00
8fef7db9cd
config: switch project configuration to pel v2.0
2025-03-05 07:00:13 +08:00
7c10a0657d
Merge branch 'bsp' into develop
2025-03-05 06:59:40 +08:00
0c938f1f31
fix: Set DEBUG_NRF = 1 to enable additional debug information.
2025-03-05 06:59:27 +08:00
05d31476ba
feat: GCC GDB 14.2.1/15.2/r2
2025-03-05 06:59:22 +08:00
35c6d81c08
Merge branch 'pel2.0/auto-scan-mode' into develp
2025-02-21 17:49:00 +08:00
027fd4684f
config: switch project configuration to DEF_ELITE_DEV
2025-02-21 17:48:41 +08:00
52e6b57dd9
updated: PELv2.0 manual_scan_mode and auto_scan_mode instruction
2025-02-21 10:19:02 +08:00
ac392bf9f9
update: 1. update auto scan mode code
...
2. remove unnecessary dev_mode
2025-02-14 19:12:13 +08:00
fe799794bf
pel: 先暫存 auto scan mode 小程式
2025-02-13 17:59:38 +08:00
628ba0aef1
new implementation for auto scan mode
2025-02-07 17:36:49 +08:00
0c2ae5fa2a
note: update some log information of device
2025-02-06 15:44:40 +08:00
bf32c1fb1c
demo: 快速demo版本 v1.0 [IOPH]
2025-02-05 13:40:45 +08:00
21a332a93f
Merge branch 'pel2.0/demo_pattern_id_scan' into dev/pel2.0
2025-02-05 10:24:05 +08:00
fc6f783145
fix: 使用 SAADC 中斷, 修正 pulse 沒結束就被停止造成的波型異常
...
1. 當 SAADC EVENTS_STARTED 觸發中斷時代表 pulse 已輸出完成並開始 ADC 轉換
2. 當 SAADC EVENTS_RESULTDONE 觸發中斷時代表 ADC 已轉換完成並寫入ram, 同時進入 pulse idle 的狀態.
2025-02-04 23:44:27 +08:00
Roy_01