- change calibration column type bytea

- save calibration info into db compare with cali version

.gitignore

@@ -7,3 +7,4 @@
 /.vscode
 /media
 python/biopro/sever/_identify.py
+*.log

README.md

@@ -78,6 +78,8 @@ add ssh.txt in boot folder
 
 ###### Install dependencies
     sudo apt-get install vim git wiringpi build-essential libi2c-dev i2c-tools python-dev libffi-dev python3-pip postgresql npm
+    sudo apt-get install libatlas-base-dev
+    sudo apt-get install python3-numpy
 
 ###### wiringpi conflict
 need to install wiringpi:  https://github.com/WiringPi/WiringPi
@@ -94,6 +96,7 @@ git clone https://gitlab.com/wisetop/controller/wisetopdataserver.git
 ```
  cd ~/wisetopdataserver
 pip3 install -r requirements.txt
+pip3 install SQLAlchemy
 ```
 ##### Packages version
 ```
@@ -155,8 +158,8 @@ reboot
 
 ###### Set pi password
 ```
-$cd ~
-$passwd
+cd ~
+passwd
 Current password:raspberry
 New password:5k6zj454778225
 Retype new password:5k6zj454778225
@@ -195,11 +198,11 @@ exit 0
 ### MQTT broker install
 
 ###### 1.Install mosquitto
-$sudo apt-get install mosquitto mosquitto-clients
+sudo apt-get install mosquitto mosquitto-clients
 
 
 ###### 2.Enable Remote Access
-$sudo vim /etc/mosquitto/conf.d/default.conf
+sudo vim /etc/mosquitto/conf.d/default.conf
 
 add the code following as:
 ```
@@ -210,13 +213,13 @@ protocol websockets
 allow_anonymous true
 ```
 ###### 3.restart mqtt broker
-$sudo systemctl restart mosquitto
+sudo systemctl restart mosquitto
 
 ###### 4.Robust MQTT
 create mosquitto_restart.sh
 
-$cd ~
-$sudo vim mosquitto_restart.sh
+cd ~
+sudo vim mosquitto_restart.sh
 
 
 add the code following as:
@@ -233,16 +236,16 @@ echo "$SERVICE is currently running" >> /home/ubuntu/cron.log
 exit 0
 ```
 ###### 5.add mosquitto_restart.sh to root routing
-$sudo chmod +x mosquitto_restart.sh
-$sudo  -i
-$crontab -e
+sudo chmod +x mosquitto_restart.sh
+sudo  -i
+crontab -e
 
 add the code following as:
 ```
 */5 * * * * /home/pi/mosquitto_restart.sh
 ```
 ###### 6.Auto run MQTT broker when when pi-start
-$sudo vim /etc/rc.local
+sudo vim /etc/rc.local
 
 add the code following as:
 ```
@@ -251,31 +254,31 @@ sudo nohup systemctl restart mosquitto
 
 ### Setting up a Routed Wireless Access Point
 ###### 1.Install AP and Management Software
-$sudo apt install hostapd
-$sudo systemctl unmask hostapd
-$sudo systemctl enable hostapd
-$sudo apt install dnsmasq
-$sudo DEBIAN_FRONTEND=noninteractive apt install -y netfilter-persistent iptables-persistent
+sudo apt install hostapd
+sudo systemctl unmask hostapd
+sudo systemctl enable hostapd
+sudo apt install dnsmasq
+sudo DEBIAN_FRONTEND=noninteractive apt install -y netfilter-persistent iptables-persistent
 
 ###### 2.Set up the Network Router
-$sudo nano /etc/dhcpcd.conf
+sudo nano /etc/dhcpcd.conf
 ```
 interface wlan0
     static ip_address=192.168.2.1/24
     nohook wpa_supplicant
 ```
-$sudo nano /etc/sysctl.d/routed-ap.conf
+sudo nano /etc/sysctl.d/routed-ap.conf
 ```
 # Enable IPv4 routing
 net.ipv4.ip_forward=1
 ```
 
-$sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
-$sudo netfilter-persistent save
-$sudo mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig
+sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
+sudo netfilter-persistent save
+sudo mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig
 
 
-$sudo nano /etc/dnsmasq.conf
+sudo nano /etc/dnsmasq.conf
 
 ```
 interface=wlan0 # Listening interface
@@ -286,10 +289,10 @@ address=/gw.wlan/192.168.2.1
                 # Alias for this router
 ```
 ###### 3.Ensure Wireless Operation
-$sudo rfkill unblock wlan
+sudo rfkill unblock wlan
 
 ###### 4.Configure the AP Software
-$sudo nano /etc/hostapd/hostapd.conf
+sudo nano /etc/hostapd/hostapd.conf
 
 ```
 country_code=TW
@@ -314,11 +317,13 @@ wme_enabled=1
 ht_capab=[HT40+][SHORT-GI-40]
 ```
 ###### 5.Running the new Wireless AP
-$sudo systemctl reboot
+sudo systemctl reboot
 
+### Install Apache2
+sudo apt install apache2
 
-### Set web site
-$sudo vim ./sites-available/000-default.conf
+### Deploy web site
+sudo vim /etc/apache2/sites-available/000-default.conf
 ```
 <VirtualHost *:8080> #80------>8080
         # The ServerName directive sets the request scheme, hostname and port that
@@ -358,3 +363,27 @@ $sudo vim ./sites-available/000-default.conf
 
 ##### raspberry website document:
 > https://www.raspberrypi.org/documentation/configuration/wireless/access-point-routed.md
+
+# ChangeLog
+[2022.12.28]
+change meta_project_info to project_metas
+change project_report to project_reports
+alter table project_meta column cycle type string to jsonb
+
+[2022.11.16]
+add python package SQLAlchemy
+add new column project(int4) in postgresSQL table recording_meta_datas
+add new postgresSQL table project_report
+add new postgresSQL table meta_project_info
+
+[2022.10.18]
+socektTimeout from 1s -> 5s
+socketListen from 3 -> 20
+
+[2022.09.30]
+add new column cycle(jsonb) in postgresSQL table projects
+
+[2022.9.28]
+add python package numpy
+
+

python/biopro/data.py

@@ -87,7 +87,8 @@ class DataAPI(metaclass=abc.ABCMeta):
     def update_device_configuration(self,
                                     device: Union[int, Device],
                                     meta_file: Union[str, Path, RecordingMetaFile],
-                                    data_format: Union[AnyStr, DataDecodeFormat]):
+                                    data_format: Union[AnyStr, DataDecodeFormat],
+                                    project_info: str):
         """set device configuration.
 
         :param device: device ID
@@ -154,7 +155,8 @@ class DataClient(SocketClient, DataAPI, metaclass=SocketClientMacro(DataAPI)):
     def update_device_configuration(self,
                                     device: Union[int, Device],
                                     meta_file: Union[str, Path, RecordingMetaFile],
-                                    data_format: Union[AnyStr, DataDecodeFormat]):
+                                    data_format: Union[AnyStr, DataDecodeFormat],
+                                    project_info: str):
 
         # meta file
         if isinstance(meta_file, str):
@@ -186,7 +188,7 @@ class DataClient(SocketClient, DataAPI, metaclass=SocketClientMacro(DataAPI)):
             raise TypeError('not a data decode format : ' + data_format.__class__.__name__)
 
         # send
-        self.send_command('update_device_configuration', device, meta_file, data_format)
+        self.send_command('update_device_configuration', device, meta_file, data_format, project_info)
 
     def is_sync(self, device: Union[None, int, Device] = None) -> bool:
         if isinstance(device, Device):

python/biopro/db/base.py

@@ -0,0 +1,10 @@
+from sqlalchemy import create_engine
+# from sqlalchemy.ext.declarative import declarative_base
+from sqlalchemy.orm import sessionmaker, declarative_base
+
+SQLALCHEMY_DATABASE_URL = "postgresql://biopro:BioProControlBox@127.0.0.1:5432/postgres"
+
+engine = create_engine(SQLALCHEMY_DATABASE_URL)
+Session = sessionmaker(bind=engine)
+
+Base = declarative_base()

python/biopro/db/collection.py

@@ -0,0 +1,60 @@
+from sqlalchemy import Table, Column, String, MetaData, ForeignKey, JSON
+from sqlalchemy.sql import select, func
+from sqlalchemy.types import Integer, BigInteger, String, Boolean, TIMESTAMP, Numeric
+from sqlalchemy.dialects.postgresql import JSONB
+from biopro.db.base import Session
+
+from .base import Base
+
+class Collection(Base):
+    __tablename__ = "collections"
+
+    id = Column(Integer, primary_key=True)
+    name = Column(String(255))
+    parent = Column(JSONB)
+    controller_id = Column(Integer)
+    type = Column(String(255))
+    description = Column(String(255))
+    deleted = Column(Boolean)
+    created_at = Column(TIMESTAMP(timezone=True), server_default=func.now())
+    updated_at = Column(TIMESTAMP(timezone=True), onupdate=func.now())
+
+    @classmethod
+    def create_collection(cls, collection_name, parent):
+        with Session() as session:
+            name = cls.check_name_duplicate(collection_name, parent, 0)
+            collection = Collection(
+                name = name,
+                parent = parent,
+                type= "folder",
+            )
+            session.add(collection)
+            session.commit()
+            print('a', collection.id)
+            return collection
+
+    @classmethod
+    def check_name_duplicate(cls, collection_name, parent, n):
+        with Session() as session:
+            result = session.query(Collection).filter(Collection.name == cls.generate_name(collection_name, n), Collection.parent == parent).first()
+            if result is None:
+                return cls.generate_name(collection_name, n)
+            else:
+                new_num = n + 1
+                # new_name =  f"{collection_name}({new_num})" 
+                return cls.check_name_duplicate(collection_name, parent, new_num)
+
+    @classmethod
+    def generate_name(cls, collection_name, n):
+        if n==0:
+            return collection_name
+        else:
+            return f"{collection_name}({n})" 
+    
+    @classmethod
+    def find_collection(cls, collection_name, parent):
+        with Session() as session:
+            result = session.query(Collection).filter(Collection.name == collection_name, Collection.parent == parent).first()
+            return result
+    
+        

python/biopro/db/device.py

@@ -0,0 +1,51 @@
+from sqlalchemy import Table, Column, String, MetaData, ForeignKey, JSON
+from sqlalchemy.sql import select, func
+from sqlalchemy.types import Integer, BigInteger, String, Boolean, TIMESTAMP, Numeric, Float, BINARY, LargeBinary
+from sqlalchemy.dialects.postgresql import JSONB
+
+from .base import Base, Session
+
+class Device(Base):
+    __tablename__ = "devices"
+
+    id = Column(Integer, primary_key=True)
+    name = Column(String(255))
+    mac_address = Column(String(255))
+    serial_number = Column(String(255))
+    configuration = Column(JSONB)
+    library = Column(String(255))
+    library_version = Column(String(255))
+    device_version = Column(String(255))
+    type = Column(String(255))
+    battery = Column(Integer)
+    temperature = Column(Float)
+    auto_connect = Column(Boolean)
+    connect_priority = Column(Integer)
+    connect_time = Column(BigInteger)
+    parameter_set = Column(JSONB)
+    running = Column(Boolean)
+    calibration = Column(LargeBinary)
+    calibration_version = Column(Integer, default=-1)
+    user_auth = Column(JSONB)
+    deleted = Column(Boolean)
+    created_at = Column(TIMESTAMP(timezone=True), server_default=func.now())
+    updated_at = Column(TIMESTAMP(timezone=True), onupdate=func.now())
+
+    @classmethod
+    def update_device(cls, device, options):
+        with Session() as session:
+            result = session.query(Device).filter(Device.mac_address == device['mac_address']).first()
+            for key, value in options.items():
+                setattr(result, key, value)
+            session.commit()
+    
+    @classmethod
+    def get_device(cls, device):
+        with Session() as session:
+            result = session.query(Device).filter(Device.mac_address == device['mac_address']).first()
+            return result
+            
+
+
+    # def __repr__(self):
+    #     return f"User(id={self.id!r}, name={self.name!r}, fullname={self.task!r})"

python/biopro/db/project.py

@@ -0,0 +1,24 @@
+from sqlalchemy import Table, Column, String, MetaData, ForeignKey, JSON
+from sqlalchemy.sql import select, func
+from sqlalchemy.types import Integer, BigInteger, String, Boolean, TIMESTAMP, Numeric
+from sqlalchemy.dialects.postgresql import JSONB
+
+from .base import Base
+
+class Project(Base):
+    __tablename__ = "project"
+
+    id = Column(Integer, primary_key=True)
+    name = Column(String)
+    desc = Column(String)
+    task = Column(JSONB)
+    cycle = Column(JSONB)
+    device = Column(JSONB)
+    uuid = Column(String(36))
+    user_auth = Column(JSONB)
+    deleted = Column(Boolean, default = False)
+    created_at = Column(TIMESTAMP(timezone=True), server_default=func.now())
+    updated_at = Column(TIMESTAMP(timezone=True), onupdate=func.now())
+
+    # def __repr__(self):
+    #     return f"User(id={self.id!r}, name={self.name!r}, fullname={self.task!r})"

python/biopro/db/project_meta.py

@@ -0,0 +1,29 @@
+from sqlalchemy import Table, Column, String, MetaData, ForeignKey, JSON
+from sqlalchemy.sql import select, func
+from sqlalchemy.types import Integer, BigInteger, String, Boolean, TIMESTAMP, Numeric
+from sqlalchemy.dialects.postgresql import JSONB
+
+from .base import Base, Session
+
+class MetaProjectInfo(Base):
+    __tablename__ = "project_metas"
+
+    id = Column(Integer, primary_key=True)
+    project = Column(String(36))
+    cycle = Column(JSONB)
+    task = Column(JSONB)
+    serial_number = Column(Integer)
+    deleted = Column(Boolean, default = False)
+    created_at = Column(TIMESTAMP(timezone=True), server_default=func.now())
+    updated_at = Column(TIMESTAMP(timezone=True), onupdate=func.now())
+
+    @classmethod
+    def create_project_meta(cls, project):
+        with Session() as session:
+            project_meta = MetaProjectInfo(project = project['project'], cycle= project['cycle'], task=project['task'], serial_number=int(project['serial_number']))
+            session.add(project_meta)
+            session.commit()
+            return project_meta.id
+
+    # def __repr__(self):
+    #     return f"User(id={self.id!r}, name={self.name!r}, fullname={self.task!r})"

python/biopro/db/project_report.py

@@ -0,0 +1,24 @@
+from sqlalchemy import Table, Column, String, MetaData, ForeignKey, JSON
+from sqlalchemy.sql import select, func
+from sqlalchemy.types import Integer, BigInteger, String, Boolean, TIMESTAMP, Numeric
+from sqlalchemy.dialects.postgresql import JSONB
+
+from .base import Base
+
+class ProjectReport(Base):
+    __tablename__ = "project_reports"
+
+    id = Column(Integer, primary_key=True)
+    name = Column(String)
+    desc = Column(String)
+    task = Column(JSONB)
+    cycle = Column(JSONB)
+    device = Column(JSONB)
+    uuid = Column(String(36))
+    user_auth = Column(JSONB)
+    deleted = Column(Boolean, default = False)
+    created_at = Column(TIMESTAMP(timezone=True), server_default=func.now())
+    updated_at = Column(TIMESTAMP(timezone=True), onupdate=func.now())
+
+    # def __repr__(self):
+    #     return f"User(id={self.id!r}, name={self.name!r}, fullname={self.task!r})"

python/biopro/device/device_cc2650.py

@@ -350,6 +350,7 @@ class CC2650Device(Device):
         self._recording_file_name: str = 'recording_data'
         self._coeff: bytes = b''
         self._device_version = ""
+        self._cali_version = -1
 
     @property
     def device_id(self) -> int:
@@ -549,6 +550,24 @@ class CC2650Device(Device):
             self.update_calibration_info(device_type)
 
         return self._coeff
+    
+    def update_cali_version(self) -> bool:
+        try:
+            code = self._encode_instruction(DeviceInstruction.TYP_CIS, DeviceInstruction.CIS_CALI, 0)
+            self._master.write_characteristic(self.device_id, CC2650MasterDevice.COMMAND_HANDLE, code)
+        except SendInstructionTimeoutError:
+            self._master.log_warn('device', self.device_id, 'update cali version error')
+            return False
+        except RuntimeError:
+            self._master.log_warn('device', self.device_id, 'update cali version error')
+            return False
+        else:
+            sleep(0.1)
+            # receive
+            version = self._master.read_characteristic(self.device_id,CC2650MasterDevice.RETURN_HANDLE)
+            self._cali_version = struct.unpack('<H', version[2:4])[0]
+            return True
+
 
     def update_calibration_info(self, device_type: str):
         """ get device calibration info """
@@ -660,9 +679,9 @@ class CC2650Device(Device):
                             break
 
         elif device_type == 'EISZeroOne':
-            i = 0
+            i = 1
             request_times = 0
-            while i < 13:
+            while i <= 24:
                 try:
                     # send
                     code = self._encode_instruction(DeviceInstruction.TYP_CIS, DeviceInstruction.CIS_CALI, i)
@@ -1995,6 +2014,9 @@ class CC2650SingleMasterCentralDevice(CC2650MasterDevice, Synchronized):
             # self._interface.flush()
             return False
 
+        if len(scan_response) <= 1:
+            print('len(scan) <= 1, scan_response:', list(scan_response))
+            return False
         # instruction format:
         # ins[0]: get_scan_response = 0x04
         #  ins[1]: number of scanned device=0; a certain device = device_id (could be 1~8)
@@ -2177,23 +2199,12 @@ class CC2650SingleMasterCentralDevice(CC2650MasterDevice, Synchronized):
         else:
             for dev in self._found:
                 if dev.mac_address == address:
-
-                    # send device mac and addrType
-                    try:
-                        # print('send_connect',bytes(connect_ins))
-                        self._cc2650.send("bytes", bytes(connect_ins))
-
-                    except SerialTimeoutException as e:
-                        raise RecvTimeout('device CC2650 connect fail') from e
-
-                    else:
-                        sleep(2)
-
                     # connection establish done?
                     for retry_recv_ack in range(5):
-                        self._cc2650.send("bytes", bytes((0, 0, 0, 0)))
-
                         try:
+                            # send device mac and addrType
+                            self._cc2650.send("bytes", bytes(connect_ins))
+                            sleep(1.5)
                             con_done = self._cc2650.recv_uart(timeout = 0.1)
 
                         except RecvTimeout:
@@ -2202,6 +2213,7 @@ class CC2650SingleMasterCentralDevice(CC2650MasterDevice, Synchronized):
 
                         # is the ack valid?
                         if con_done is None:
+                            self.log_info("recv connection timeout, retry... ")
                             continue
 
                         elif con_done[0] is 46 and \

python/biopro/device/manager.py

@@ -574,20 +574,23 @@ class DeviceManager(MasterDevice, Synchronized):
         :param device: device ID or response info
         :return: CompletedDevice, None if not found.
         """
-        if isinstance(device, int):
-            for slave in self._device:
-                if slave.device_id == device:
-                    return slave
+        try:
+            if isinstance(device, int):
+                for slave in self._device:
+                    if slave.device_id == device:
+                        return slave
 
-        elif isinstance(device, str):
-            for slave in self._device:
-                if ':'.join('{:02x}'.format(b) for b in slave.mac_address) == device.lower():
-                    return slave
+            elif isinstance(device, str):
+                for slave in self._device:
+                    if ':'.join('{:02x}'.format(b) for b in slave.mac_address) == device.lower():
+                        return slave
 
-        elif isinstance(device, DeviceInfo):
-            for slave in self._device:
-                if device.match(slave):
-                    return slave
+            elif isinstance(device, DeviceInfo):
+                for slave in self._device:
+                    if device.match(slave):
+                        return slave
+        except BaseException as e:
+            self.log_error('device not found', str(device))
 
         return None
 
@@ -829,6 +832,9 @@ class DeviceManager(MasterDevice, Synchronized):
 
         elif func == InternalInstruction.PREDEFINED_DISABLE_CACHE:
             self._device_disable_cache(device, *para)
+        
+        elif func == InternalInstruction.PREDEFINED_IDLE:
+            self._idle(device, *para)
 
         elif isinstance(device, DebugDevice):
             if func == InternalInstruction.PREDEFINED_NOTIFY:
@@ -848,6 +854,11 @@ class DeviceManager(MasterDevice, Synchronized):
                                               InternalInstruction.PREDEFINED_DATA_FORMAT,
                                               f)
 
+    def _idle(self, device: Device, expr: AnyStr):
+        self._handler.device_internal_command(device.device_id,
+                                                InternalInstruction.PREDEFINED_IDLE,
+                                                None)
+
     def _device_data_format_cali(self, device: Device, expr: str, cali: bytes = None):
         if cali is None:
             cali = device.calibration_info(expr)

python/biopro/devlib/data.py

@@ -884,20 +884,54 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
     def decode(self, data: bytes) -> Optional[RecordingData]:
         if len(data) < 18:
             return None
-        voltage = 0
-        mem_cnt = data[1]
-        time_stamp: float = struct.unpack('<I', data[4:8])[0]  # unit: ms 0x18030000
-        current = struct.unpack('<i', data[8:12])[0]  # unit: nA
-        voltage = struct.unpack('<i', data[12:16])[0]  # unit: uV
-        impedance = struct.unpack('<i', data[16:20])[0]  # unit: mOm
+        
+        #/* Elite Notify data:
+        # * +--------+----------+---------+---------+---------+-----------+-----------------+
+        # * | id(1B) | time(4B) | ch1(4B) | ch2(4B) | ch3(4B) | cycle(2B) | finish_flag(1B) |
+        # * | bat(4B) | notify#(1B) | ch4(4B) | ch5(4B) | ch6(4B) | __(3B) |
+        # * +---------+-------------+---------+---------+---------+--------+
+        # */
+        #/*
+        # * EliteADCControl(): use ADC plot, and send what data to controller
+        # * +---------------------------+-----------+-----------+-----------+-----------+-----------+
+        # * |           MODE            |    ch1    |    ch2    |    ch3    |   cycle   |    ch4    |
+        # * +---------------------------+-----------+-----------+-----------+-----------+-----------+
+        # * | CURVE_IV                  |    Iin    |    Vout   |    Vin    |           |    Vmon   |
+        # * | CURVE_IV_CY               |    Iin    |    Vout   |    Vin    |     v     |    Vmon   |
+        # * | CURVE_VO                  |    Iin    |    Vout   |    Vin    |           |    Vmon   |
+        # * | CURVE_RT                  |    Iin    |    Vout   |     R     |           |    Vmon   |
+        # * | CURVE_VT                  |    Iin    |    Vin    |           |           |           |
+        # * | CURVE_IT                  |    Iin    |    Vin    |    Vout   |           |    Vmon   |
+        # * | CURVE_CC                  |    Iin    |    Vin    |    Vout   |           |    Vmon   |
+        # * | CURVE_CP                  |    Iin    | Vout-Vin  |    Vout   |           |    Vmon   |
+        # * | CURVE_CV                  |    Iin    | Vout-Vin  |    Vout   |     v     |    Vmon   |
+        # * | CURVE_LSV                 |    Iin    | Vout-Vin  |    Vout   |           |    Vmon   |
+        # * | CURVE_CA                  |    Iin    | Vout-Vin  |    Vout   |           |    Vmon   |
+        # * | CURVE_OCP                 |    Iin    | Vmon-Vin  |    Vin    |           |    Vmon   |
+        # * | CURVE_UNI_PULSE           |  pul1_Iin | pul2_Iin  |           |           |           |
+        # * | CURVE_DPV                 | c1&c2_avg | Vout-Vin  |    Vout   |           |    Vmon   |
+        # * | CURVE_DPV_SMPRATE         |    Iin    | Vout-Vin  |    Vout   |           |    Vmon   |
+        # * | CURVE_DPV_ADVANCE         | c1&c2_avg | Vout-Vin  |    Vout   |           |    Vmon   |
+        # * | CURVE_DPV_ADVANCE_SMPRATE |    Iin    | Vout-Vin  |    Vout   |           |    Vmon   |
+        # * +---------------------------+-----------+-----------+-----------+-----------+-----------+
+        # * 
+        # * ps. c1_avg = pul1_Iin
+        # * ps. c2_avg = pul2_Iin
+        # */
 
-        cycle_number = struct.unpack('<H', data[20:22])[0]
-        finish_mode_falg = data[22]
-        battery = struct.unpack('<i', data[23:27])[0]
-        elite_notify_times = data[27]
-        notify_one = struct.unpack('<i', data[28:32])[0]
-        notify_two = struct.unpack('<i', data[32:36])[0]
-        notify_three = struct.unpack('<i', data[36:40])[0]
+        mem_cnt = data[1]
+        time_stamp: float = struct.unpack('<I', data[1+3:5+3])[0]
+        ch1 = struct.unpack('<i', data[5+3:9+3])[0]  # unit: nA
+        ch2 = struct.unpack('<i', data[9+3:13+3])[0]  # unit: uV
+        ch3 = struct.unpack('<i', data[13+3:17+3])[0]  # unit: mOm
+
+        cycle_number = struct.unpack('<H', data[17+3:19+3])[0]
+        finish_mode_falg = data[19+3]
+        battery = struct.unpack('<i', data[20+3:24+3])[0]
+        elite_notify_times = data[24+3]
+        ch4 = struct.unpack('<i', data[25+3:29+3])[0]
+        ch5 = struct.unpack('<i', data[29+3:33+3])[0]
+        ch6 = struct.unpack('<i', data[33+3:37+3])[0]
         # self._show_data = True
 
         mem_wrong_information = struct.unpack('<i', data[43:47])[0] # mem_wrong_information = green retry, green wrong, red retry, red wrong
@@ -924,25 +958,29 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
             else:
                 if self._show_data:
                     print('|', time_stamp, '|', delta, '|', int(time_stamp * 1000 / 2),
-                        '|', current, '|', voltage, '|', impedance, '|', cycle_number, 
-                        '|', notify_one, '|', notify_two, '|', notify_three, 
-                        '|', finishMode, '@', str(self.device))
+                        '|', ch1, '|', ch2, '|', ch3, '|', cycle_number, 
+                        '|', ch4, '|', ch5, '|', ch6, 
+                        '|', finishMode, '@', str(self.device), flush = True)
 
-                # print('|', '{:10}'.format(time_stamp),
-                #       '|', '{:4}'.format(delta),
-                #       '|', '{:10}'.format(int(time_stamp * 1000 / 2)),
-                #       '|', '{:10}'.format(current),
-                #       '|', '{:10}'.format(voltage),
-                #       '|', '{:10}'.format(impedance),
-                #       '|', '{:5}'.format(cycle_number),
-                #       '|', '{:1}'.format(finishMode),
-                #       '@', str(self.device), '|')
+                    # print('|', '{:10}'.format(time_stamp),
+                    #     '|', '{:4}'.format(delta),
+                    #     '|', '{:10}'.format(int(time_stamp * 1000 / 2)),    #[usec]
+                    #     '|', '{:10}'.format(ch1),                           #[nA]
+                    #     '|', '{:10}'.format(ch2),                           #[uV]
+                    #     '|', '{:10}'.format(ch3),                     
+                    #     '|', '{:5}'.format(cycle_number),
+                    #     '|', '{:10}'.format(ch4),                           #Voutin[uV]
+                    #     '|', '{:10}'.format(ch5),
+                    #     '|', '{:10}'.format(ch6),
+                    #     '|', '{:5}'.format(battery),                        #[mV]
+                    #     '|', '{:4}'.format(elite_notify_times),
+                    #     '|', '{:1}'.format(finishMode),
+                    #     '@', str(self.device), '|', flush = True)
 
-                # print('|', '{:5}'.format(mem_wrong_information),
-                #       '|', '{:2}'.format(ram_num),
-                #       '|', '{:2}'.format(broken_flag),
-                #       '@', str(self.device), '|')
-                pass
+                    # print('|', '{:5}'.format(mem_wrong_information),
+                    #       '|', '{:2}'.format(ram_num),
+                    #       '|', '{:2}'.format(broken_flag),
+                    #       '@', str(self.device), '|')
 
         if finishMode == True:
             print("finishMode full data:", list(data), datetime.now())
@@ -951,13 +989,13 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
             self._mode_stop = 0
 
         ret = RecordingData(self.device, int(time_stamp * 1000 / 2), 0)
-        ret.append_data(0, current)
-        ret.append_data(1, voltage)
-        ret.append_data(2, impedance)
+        ret.append_data(0, ch1)
+        ret.append_data(1, ch2)
+        ret.append_data(2, ch3)
         ret.append_data(3, cycle_number)
-        ret.append_data(4, notify_one)
-        ret.append_data(5, notify_two)
-        ret.append_data(6, notify_three)
+        ret.append_data(4, ch4)
+        ret.append_data(5, ch5)
+        ret.append_data(6, ch6)
         # ret.append_data(4, battery)
         # ret.append_data(5, elite_notify_times)
         # ret.append_data(6, mem_cnt)
@@ -1345,8 +1383,8 @@ class EISZeroOneDataDecoder(RecDataDecoder):
 
     __slots__ = ('_message', '_cycle_number', '_start_return_data', '_time_stamp',
                  '_total_time_stamp', '_mode', '_cycle_start_time',
-                 '_mode_stop', '_last_time_stamp', '_last_delta', '_cali_coeff',
-                 'cali_coeff', '_ac_amp', '_mode',
+                 '_mode_stop', '_last_time_stamp', '_last_delta', 
+                 '_cali_package', 'cali_coeff', '_ac_amp', '_mode',
                  '_last_phase', '_first_phase_flag', '_show_data')
 
     def __init__(self, cali_coeff: bytes = None):
@@ -1360,144 +1398,234 @@ class EISZeroOneDataDecoder(RecDataDecoder):
         self._mode_stop = 0
 
         self._cycle_start_time = []
-        self._ac_amp: int = 0
         self._mode: int = 0
         self._last_phase = 0
         self._first_phase_flag = 1
 
-        self._cali_coeff: Optional[bytes] = None
+        self._cali_package: Optional[bytes] = None
         self.cali_coeff: Optional[List[Tuple[int, int]]] = None
 
         self._show_data = False
 
-        if cali_coeff is not None:
-            self._cali_coeff = cali_coeff
-            self.cali_coeff = self._decode_cali_coeff(cali_coeff)
+        if self._cali_package is None:
+            self._cali_package = cali_coeff
+            self.cali_coeff = self._decode_cali_coeff(self._cali_package)
             
     @staticmethod
     def _decode_cali_coeff(cali_coeff: bytes) -> Optional[List[Tuple[int, int]]]:
         if cali_coeff != b'':
+            cis_data_len = 20
             cali_table = []
             hsrtia_a = []
             hsrtia_b = []
-            hsrtia_c = []
-            hsrtia_d = []
+            rolloff = []
             phase_coeff = []
             phase_offset = []
-            
-            # phase_coeff = [[0]*4 for i in range(4)]
-            # phase_offset = [[0]*4 for i in range(4)]
 
-            phase_coeff = numpy.zeros([4, 4], dtype = int)
-            phase_offset = numpy.zeros([4, 4], dtype = int)  
+            phase_coeff = numpy.zeros([8, 4], dtype = int)
+            phase_offset = numpy.zeros([8, 4], dtype = int)  
 
             ########################################
             # phase_coeff
-            # [[gain0, g1, g2, g3] ----->最高頻
-            #  [gain0, g1, g2, g3] ----->中頻
-            #  [gain0, g1, g2, g3] ----->低頻
-            #  [gain0, g1, g2, g3] ----->最低頻
+            # [[freq0, freq1, freq2, freq3] ----->gain0
+            #  [freq0, freq1, freq2, freq3] ----->gain1
+            #  [freq0, freq1, freq2, freq3] ----->gain2
+            #  [freq0, freq1, freq2, freq3] ----->gain3
             # ]
             #######################################
 
-            # print('cali_coeff', cali_coeff)
-            cutoff_freq = struct.unpack('>I', cali_coeff[1:5])[0] * 100     #4
-            # temp = struct.unpack('>B', cali_coeff[5:6])[0]                 #1
-            # hsrtia_200r = struct.unpack('>B', cali_coeff[6:7])[0]           #1
-            # hsrtia_5k = struct.unpack('>H', cali_coeff[7:9])[0]             #2
-            # hsrtia_20k = struct.unpack('>H', cali_coeff[6:8])[0]           #2
-            # hsrtia_160k = struct.unpack('>I', cali_coeff[8:12])[0]         #4
+            #hstia=0
+            cis_cali_packet = 1
+            index = (cis_cali_packet - 1) * cis_data_len
+            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0])
+            hsrtia_b.append(struct.unpack('>q', cali_coeff[index+5:index+13])[0])
+            rolloff.append(struct.unpack('>i', cali_coeff[index+13:index+17])[0])
 
-            index = 20
+            cis_cali_packet = 2
+            index = (cis_cali_packet - 1) * cis_data_len
             g = 0
-            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
-            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
-            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
-            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            phase_coeff[g][0] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][0] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][1] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][1] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
             
-            index = 40
+            cis_cali_packet = 3
+            index = (cis_cali_packet - 1) * cis_data_len
             g = 0
-            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
-            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
-            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
-            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            phase_coeff[g][2] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][2] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][3] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][3] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
             
-            #Lv[0] 160k
-            index = 60
-            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
-            hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
-            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0])
+            #hstia=1
+            cis_cali_packet = 4
+            index = (cis_cali_packet - 1) * cis_data_len
+            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0])
+            hsrtia_b.append(struct.unpack('>q', cali_coeff[index+5:index+13])[0])
+            rolloff.append(struct.unpack('>i', cali_coeff[index+13:index+17])[0])
 
-            #Lv[1] 20k
-            index = 80
-            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
-            hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
-            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0])
-
-            #Lv[2] 5k
-            index = 100
-            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
-            hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
-            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0])
-
-            #Lv[3] 200R
-            index = 120
-            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
-            hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
-            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0])
-
-            index = 140
+            cis_cali_packet = 5
+            index = (cis_cali_packet - 1) * cis_data_len
             g = 1
-            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
-            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
-            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
-            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            phase_coeff[g][0] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][0] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][1] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][1] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
             
-            index = 160
+            cis_cali_packet = 6
+            index = (cis_cali_packet - 1) * cis_data_len
             g = 1
-            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
-            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
-            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
-            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
-            
-            index = 180
-            g = 2
-            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
-            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
-            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
-            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
-            
-            index = 200
-            g = 2
-            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
-            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
-            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
-            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
-            
-            index = 220
-            g = 3
-            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
-            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
-            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
-            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
-            
-            index = 240
-            g = 3
-            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
-            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
-            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
-            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            phase_coeff[g][2] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][2] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][3] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][3] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
 
-            # print('cutoff_freq', cutoff_freq)
-            # print('hsrtia_a', hsrtia_a)
-            # print('hsrtia_b', hsrtia_b)
-            # print('hsrtia_c', hsrtia_c)
-            # print('phase_coeff')
-            # print(phase_coeff)
-            # print('phase_offset')
-            # print(phase_offset)
+            #hstia=2
+            cis_cali_packet = 7
+            index = (cis_cali_packet - 1) * cis_data_len
+            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0])
+            hsrtia_b.append(struct.unpack('>q', cali_coeff[index+5:index+13])[0])
+            rolloff.append(struct.unpack('>i', cali_coeff[index+13:index+17])[0])
 
-            cali_table.append((cutoff_freq, phase_coeff, phase_offset, hsrtia_a, hsrtia_b, hsrtia_c, hsrtia_d))
+            cis_cali_packet = 8
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 2
+            phase_coeff[g][0] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][0] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][1] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][1] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            cis_cali_packet = 9
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 2
+            phase_coeff[g][2] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][2] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][3] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][3] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+
+            #hstia=3
+            cis_cali_packet = 10
+            index = (cis_cali_packet - 1) * cis_data_len
+            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0])
+            hsrtia_b.append(struct.unpack('>q', cali_coeff[index+5:index+13])[0])
+            rolloff.append(struct.unpack('>i', cali_coeff[index+13:index+17])[0])
+
+            cis_cali_packet = 11
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 3
+            phase_coeff[g][0] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][0] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][1] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][1] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            cis_cali_packet = 12
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 3
+            phase_coeff[g][2] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][2] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][3] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][3] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+
+            #hstia=4
+            cis_cali_packet = 13
+            index = (cis_cali_packet - 1) * cis_data_len
+            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0])
+            hsrtia_b.append(struct.unpack('>q', cali_coeff[index+5:index+13])[0])
+            rolloff.append(struct.unpack('>i', cali_coeff[index+13:index+17])[0])
+
+            cis_cali_packet = 14
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 4
+            phase_coeff[g][0] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][0] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][1] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][1] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            cis_cali_packet = 15
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 4
+            phase_coeff[g][2] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][2] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][3] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][3] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+
+            #hstia=5
+            cis_cali_packet = 16
+            index = (cis_cali_packet - 1) * cis_data_len
+            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0])
+            hsrtia_b.append(struct.unpack('>q', cali_coeff[index+5:index+13])[0])
+            rolloff.append(struct.unpack('>i', cali_coeff[index+13:index+17])[0])
+
+            cis_cali_packet = 17
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 5
+            phase_coeff[g][0] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][0] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][1] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][1] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            cis_cali_packet = 18
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 5
+            phase_coeff[g][2] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][2] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][3] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][3] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+
+            #hstia=6
+            cis_cali_packet = 19
+            index = (cis_cali_packet - 1) * cis_data_len
+            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0])
+            hsrtia_b.append(struct.unpack('>q', cali_coeff[index+5:index+13])[0])
+            rolloff.append(struct.unpack('>i', cali_coeff[index+13:index+17])[0])
+
+            cis_cali_packet = 20
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 6
+            phase_coeff[g][0] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][0] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][1] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][1] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            cis_cali_packet = 21
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 6
+            phase_coeff[g][2] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][2] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][3] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][3] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+
+            #hstia=7
+            cis_cali_packet = 22
+            index = (cis_cali_packet - 1) * cis_data_len
+            hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0])
+            hsrtia_b.append(struct.unpack('>q', cali_coeff[index+5:index+13])[0])
+            rolloff.append(struct.unpack('>i', cali_coeff[index+13:index+17])[0])
+
+            cis_cali_packet = 23
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 7
+            phase_coeff[g][0] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][0] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][1] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][1] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            cis_cali_packet = 24
+            index = (cis_cali_packet - 1) * cis_data_len
+            g = 7
+            phase_coeff[g][2] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[g][2] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[g][3] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[g][3] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            print('hsrtia_a', hsrtia_a)
+            print('hsrtia_b', hsrtia_b)
+            print('rolloff', rolloff)
+            print('phase_coeff')
+            print(phase_coeff)
+            print('phase_offset')
+            print(phase_offset)
+
+            cali_table.append((phase_coeff, phase_offset, hsrtia_a, hsrtia_b, rolloff))
 
             return cali_table
         else:
@@ -1506,10 +1634,10 @@ class EISZeroOneDataDecoder(RecDataDecoder):
 
     @property
     def name(self) -> AnyStr:
-        if self._cali_coeff is None:
+        if self._cali_package is None:
             return self.NAME
         else:
-            return self.NAME.encode() + b':' + self._cali_coeff
+            return self.NAME.encode() + b':' + self._cali_package
 
     def message(self) -> Optional[str]:
         ret = self._message
@@ -1528,8 +1656,13 @@ class EISZeroOneDataDecoder(RecDataDecoder):
         cycle_number = struct.unpack('>H', data[17+3:19+3])[0]
         d19 = data[19+3]
         gain = data[20+3]
-        finishMode = (d19 & 0x80) >> 7        
+        finishMode = (d19 & 0x80) >> 7  
+        ch4 = struct.unpack('<i', data[21+3:25+3])[0] # Amp[uV]
         
+        notify_one = struct.unpack('<i', data[25+3:29+3])[0]
+        notify_two = struct.unpack('<i', data[29+3:33+3])[0]
+        notify_three = struct.unpack('<i', data[33+3:37+3])[0]
+
         if time_stamp == 0:
             self._start_return_data = True
 
@@ -1537,7 +1670,7 @@ class EISZeroOneDataDecoder(RecDataDecoder):
             return None
 
         if time_stamp != 0 and self._start_return_data == True:
-            if (self._mode == 0):
+            if (self._mode == 0 or self._mode == 5):
                 time_stamp, delta, ret_get_time_stamp = self.eis_get_time_stamp(time_stamp)
             else:
                 time_stamp, delta, ret_get_time_stamp = self.get_time_stamp(time_stamp)
@@ -1546,41 +1679,26 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                 print("error timeStamp full data:", list(data), datetime.now(), '\n')
                 return None
             else:
-                if self.cali_coeff is not None and self._mode == 0:
+                if self.cali_coeff is not None and (self._mode == 0 or self._mode == 5):
                     hsrtia_a = []
                     hsrtia_b = []
-                    hsrtia_c = []
-                    hsrtia_d = []
-                    cutoff_freq, phase_coeff, phase_offset, hsrtia_a, hsrtia_b, hsrtia_c, hsrtia_d = self.cali_coeff[0]
+                    rolloff = []
+                    phase_coeff, phase_offset, hsrtia_a, hsrtia_b, rolloff = self.cali_coeff[0]
 
-                    voltage_amp = round(self._ac_amp * 800 / 2047) # use UI value
-
-                if (self._mode == 0):
+                if (self._mode == 0 or self._mode == 5):
                     img = ch1
                     real = ch2
                     freq = ch3
                     fre_idx = 0
+                    voltage_amp = round(ch4 / 1000) # Amp[mV]
+                    rolloff_cali = rolloff[gain]
 
-                    rolloff_cali = cutoff_freq/1e5
                     voltage_mag = math.sqrt(img ** 2 + real ** 2) * (1 + freq ** 2 /  rolloff_cali ** 2 / 1e4)
-
-                    # if (gain == 3):
-                    #     current = hsrtia_a[gain] * math.exp(hsrtia_b[gain] * voltage_mag) + hsrtia_c[gain] * math.exp(hsrtia_d[gain] * voltage_mag)
-                    # else:
+                    current = (voltage_mag ** 2 * hsrtia_a[gain] + voltage_mag * hsrtia_b[gain]) / 1e8 #[nA]
                     
-                    current = voltage_mag ** 2 * hsrtia_a[gain] + voltage_mag * hsrtia_b[gain]
-                    # current = voltage_mag ** 2 * hsrtia_a[gain] + voltage_mag * hsrtia_b[gain] + hsrtia_c[gain]
-                    
-
-                    # print(current)
-                    # print(voltage_mag)
-                    # print(hsrtia_a[gain])
-                    # print(hsrtia_b[gain])
-                    # print(hsrtia_c[gain])
-
                     if (current != 0):
-                        # impedance = voltage_amp * 1000_000 / 1.414213 / current 
-                        impedance = voltage_amp * 707106.78 / current 
+                        # impedance[mOhm] = voltage_amp[mv] * 1000000 / 1.414213 / current[nA]       #RMS=amp*SQRT(2), SQRT(2)=1.414213
+                        impedance = voltage_amp * 707106.78 / current
                     else:
                         impedance = 0
 
@@ -1599,37 +1717,33 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                     phase = raw_phase - ideal_raw_phase
                     phase = phase % 180 if phase % 180<=90 else phase % 180-180
 
-                    # last_phase_to90 = self._last_phase % 180 if self._last_phase % 180<=90 else self._last_phase % 180-180
-                    # diff = phase - last_phase_to90
-
-                    # if (self._first_phase_flag):
-                    #     # self._last_phase = phase
-                    #     self._first_phase_flag = 0
-                    # elif (abs(diff) >= 90):
-                    #     phase = self._last_phase + diff + (180 if diff<0 else-180)
-                    # else:
-                    #     phase = self._last_phase + diff
-                    # self._last_phase = phase
-
-                    imag_after_cal = impedance * math.sin(round(phase) * math.pi / 180)
-                    real_after_cal = impedance * math.cos(round(phase) * math.pi / 180)
+                    imag_after_cal = round(impedance * math.sin(phase * math.pi / 180))
+                    real_after_cal = round(impedance * math.cos(phase * math.pi / 180))
 
                 if self._show_data:
-                    if (self._mode == 0):
+                    if (self._mode == 0 or self._mode == 5):
                         print('|', '{:10}'.format(time_stamp),
-                            '|', '{:5}'.format(delta),
-                            '|', '{:6}'.format(ch1),
-                            '|', '{:6}'.format(ch2),
-                            '|', '{:8}'.format(ch3 / 100),
-                            '|', '{:6}'.format(round(voltage_mag)),
-                            '|', '{:5}'.format(int(imag_after_cal)),
-                            '|', '{:5}'.format(int(real_after_cal)),
-                            '|', '{:5}'.format(round(impedance)),
-                            '|', '{:5}'.format(round(phase, 1)),
-                            '|', '{:5}'.format(round(current, 3)),
-                            '|', '{:1}'.format(gain),
-                            '|', '{:1}'.format(finishMode),
-                            '@', str(self.device), '|', flush = True)
+                              '|', '{:5}'.format(delta),
+                              '|', '{:5}'.format(ch1),                            #raw_img
+                              '|', '{:5}'.format(ch2),                            #raw_real
+                              '|', '{:8}'.format(ch3 * 10), '[mHz]',              #Frequency [mHz]
+                              '|', '{:5}'.format(cycle_number),                   #cycle
+                              '|', '{:5}'.format(round(imag_after_cal)), '[Ohm]', #Z_imag [Ohm]
+                              '|', '{:5}'.format(round(real_after_cal)), '[Ohm]', #Z_real [Ohm]
+                              '|', '{:5}'.format(round(impedance)), '[Ohm]',      #Impedance [Ohm]
+                              '|', '{:5}'.format(round(phase*1000)), '[mdegree]', #Phase [millidegree]
+                              '|', '{:5}'.format(round(current)), '[nA]',         #Current [nA]
+                              '|', '{:1}'.format(gain),                           #gain
+                              '|', '{:1}'.format(finishMode),                     #finishMode
+                              '@', str(self.device), '|', flush = True)
+
+                        print('|', '{:10}'.format(time_stamp),
+                              '|', '{:5}'.format(delta),
+                              '|', '{:5}'.format(notify_one),
+                              '|', '{:5}'.format(notify_two),
+                              '|', '{:5}'.format(notify_three),
+                              '|', '{:5}'.format(voltage_amp),                    #amp[mV]
+                              '|', flush = True)
                         pass
                     else:
                         print('|', '{:10}'.format(time_stamp),
@@ -1650,17 +1764,23 @@ class EISZeroOneDataDecoder(RecDataDecoder):
             self._mode_stop = 0
 
         ret = RecordingData(self.device, int(time_stamp * 1000 / 2), 0)
-        if (self._mode == 0):                           #EIS Mode
-            ret.append_data(0, ch1)                     #Raw Imag  
-            ret.append_data(1, ch2)                     #Raw Real
+        if self._mode == 0 or self._mode == 5:
+            ret.append_data(0, ch1)                     #raw_img
+            ret.append_data(1, ch2)                     #raw_real
             ret.append_data(2, ch3 * 10)                #Frequency [mHz]
-            ret.append_data(3, cycle_number)
-            ret.append_data(4, round(imag_after_cal))   #Z_imag [Ohm]
-            ret.append_data(5, round(real_after_cal))   #Z_real [Ohm]
+            ret.append_data(3, cycle_number)            #cycle
+            ret.append_data(4, imag_after_cal)          #Z_imag [Ohm]
+            ret.append_data(5, real_after_cal)          #Z_real [Ohm]
             ret.append_data(6, round(impedance))        #Impedance [Ohm]
-            ret.append_data(7, round(phase))            #Phase [degree]
+            ret.append_data(7, round(phase*1000))       #Phase [millidegree]
             ret.append_data(8, round(current))          #Current [nA]
-            ret.append_data(9, gain)                    #Gain Level
+            ret.append_data(9, gain)                    #gain
+            
+            #debug data
+            ret.append_data(10, notify_one)
+            ret.append_data(11, notify_two)
+            ret.append_data(12, notify_three)
+            ret.append_data(13, voltage_amp)            #amp[mV]
 
         else:                                           #CV Mode
             ret.append_data(0, ch1)                     #Iin     [nA]

python/biopro/devlib/device.py

@@ -738,7 +738,7 @@ class DeviceCommonInstruction:
         elif instruction == cls.START:
             return '_data_format("TDC4VAF2")', '_notify(True)', 'VIS_STI', '_sync(True)'
         elif instruction == cls.INTERRUPT:
-            return '_sync(False)', '_notify(False)', 'VIS_INT'
+            return '_notify(False)', 'VIS_INT', '_sync(False)'
         elif instruction == cls.CLOSE:
             return '_sync(False)', '_notify(False)', 'VIS_INT'
         elif instruction == cls.CALL:

python/biopro/devlib/instruction.py

@@ -283,6 +283,7 @@ class InternalInstruction(SingleInstruction):
     PREDEFINED_SET = '_set'
     PREDEFINED_CDR = '_cdr'
     PREDEFINED_DISABLE_CACHE = '_disable_cache'
+    PREDEFINED_IDLE = '_idle'
 
     PREDEFINED = (
         PREDEFINED_SLEEP,
@@ -294,6 +295,7 @@ class InternalInstruction(SingleInstruction):
         PREDEFINED_SET,
         PREDEFINED_CDR,
         PREDEFINED_DISABLE_CACHE,
+        PREDEFINED_IDLE,
     )
 
     __slots__ = ('_expr', '_para')

python/biopro/devlib/library.py

@@ -968,7 +968,7 @@ class CompletedDevice(Device):
     """
     __slots__ = ('_master', '_device_id', '_device', '_library', '_context',
                  '_parameter', '_configuration', '_lock', '_feature_mask',
-                 '_cache_battery', '_cache_battery_timestamp', '_coeff', '_status')
+                 '_cache_battery', '_cache_battery_timestamp', '_coeff', '_status', '_occupied_by_project')
 
     def __init__(self, master: MasterDevice, library: DeviceLibrary, device_id: int, device: Device):
         """
@@ -986,6 +986,8 @@ class CompletedDevice(Device):
 
         # device status ( 0: idle, 1: working, 2: error, 3: power off)
         self._status = 0
+        # device be occupied by project
+        self._occupied_by_project = None
 
         # context
         s1 = library.constant
@@ -1082,6 +1084,14 @@ class CompletedDevice(Device):
     def status(self, new_status):
         self._status = new_status
 
+    @property
+    def occupied_by_project(self) -> str:
+        return self._occupied_by_project
+    
+    @occupied_by_project.setter
+    def occupied_by_project(self, new_occupied_by_project):
+        self._occupied_by_project = new_occupied_by_project
+
     # device parameter getter/setter
 
     def parameters(self) -> List[str]:
@@ -1131,7 +1141,7 @@ class CompletedDevice(Device):
                 # raise RuntimeError('illegal parameter value : ' + value) from e
             else:
                 if name == 'MODE':
-                    if self.library_name.startswith('Elite_EDC'):
+                    if self.library_name.startswith('Elite_EDC') or 'EIS' in self.library_name:
                         self.set_parameter('CTRL_HIGH_Z_15', self.get_parameter('HIGHZ_TABLE')[value])
                         self.set_parameter('TIME_DURATION', 0)
 
@@ -1303,6 +1313,7 @@ class CompletedDevice(Device):
             'recording_file_name':      self.recording_file_name,
             'library_name':    self._library.name,
             'library_version': str(self._library.version),
+            'occupied_by_project': self._occupied_by_project,
             'configuration':   self.configuration.as_json(list_hide=True),
         }
 

python/biopro/project/project.py

@@ -1,6 +1,7 @@
 import sys
 import json
 import threading
+import logging
 
 from time import time, sleep
 from datetime import datetime
@@ -14,6 +15,9 @@ from .instruction import Instruction
 from biopro.device.manager import DeviceManager
 from biopro.text import *
 
+from biopro.db.base import Session
+from biopro.db.collection import Collection
+
 key_list = {
   'deviceList': 'device',
 }
@@ -46,10 +50,28 @@ class Project(threading.Thread):
     self._count = 1 #流水號
 
     self.log_verbose = log_verbose
+    self._logger = logging.getLogger('project')
+    self._logger.setLevel('DEBUG')
+
+    self._formatter = logging.Formatter('[%(asctime)s.%(msecs)03d] %(message)s', datefmt='%Y-%m-%d %H:%M:%S')
+    self._formatter_with_nothing = logging.Formatter('%(message)s')
 
     self.setup_project(project)
     self.setup_device(self._device)
-  
+
+    # create log file handler
+    fh = logging.FileHandler(f'/home/pi/logger/project/{self.uuid}.log', mode="w")
+    fh.setFormatter(self._formatter)
+    self._logger.addHandler(fh)
+
+    default_name = 'admin'
+    default_parent = {"folder": [1]}
+    collection = Collection.find_collection(default_name, default_parent)
+    parent = {"folder": [collection.id]}
+    # create project folder
+    collection = Collection.create_collection(self.name, parent)
+    self.setup_collection(collection)
+    
   def setup_project(self, project):
     for (key, value) in project.items():
       if key in key_list.keys():
@@ -66,7 +88,11 @@ class Project(threading.Thread):
     for device in device_list:
       mac_address = device_list[device]['pair']
       complete_device = self._device_manager.get_device(mac_address)
+      complete_device.occupied_by_project = self._uuid
       self._complete_device[device] = complete_device
+    
+  def setup_collection(self, collection):
+    self._task_manager.create_collection(collection)
 
   @property
   def id(self) -> int:
@@ -136,9 +162,23 @@ class Project(threading.Thread):
   def running_task(self):
     return self._task_manager.running_task
 
+  def get_device_parameter_set(self, device_address):
+    parameter_set = self._task_manager.running_task.parameter_set
+    return next((x for x in parameter_set if parameter_set[x]['target'] == device_address), None)
+
+  def get_cycle(self, task):
+      for index, _cycle in enumerate(self.cycle):
+        if task.uuid in _cycle['range']:
+          return _cycle
+
   def run(self):
+      # project status change running (1)
       self._status = 1
+      # save start time
       self._start_time = time()
+
+      # saving & broadcast message
+      self._logger.info('Project ' + self.name + ' start')
       self.log_verbose('Project ' + self.name + ' start')
       self.mqtt_thread.broadcast_command('project:' + self._name + ' start at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
       
@@ -161,12 +201,17 @@ class Project(threading.Thread):
 
             for condition in match_condition_list:
               match_action_list = task.get_match_action(condition.id)
+              print('match_action_list', match_action_list, match_action_list)
               for action in match_action_list:
                 if action.type == 'cycle' and condition.type == 'previous_task_done':
                   self.mqtt_thread.broadcast_command('project:task ' + task.name + ' start at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
                   self._task_manager.set_running_task(task)
+                  cycle_info = self.get_cycle(task)
+                  if cycle_info['useID'] == False:
+                    self._logger.info(f'---------- Cycle {task.name} Round {cycle_info["count"]} -----------')
                 if action.type == 'cycle' and condition.type == 'until_button_trigger':
                   self._task_manager.running_task.stop()
+                  self._logger.info(f'---------- Cycle {cycle_info["id"]} Round {cycle_info["count"]} -----------')
 
                 if self._task_manager.running_task != None:
                   if self._task_manager.running_task.uuid == task.uuid and action.type == 'cycle' and condition.type == 'after_task_run':
@@ -175,6 +220,7 @@ class Project(threading.Thread):
                 if action.type == 'start':
                   if task.status != 1:
                     self._task_manager.set_running_task(task)
+                    self._logger.info(f'Task {str(self._task_manager.running_task.name)} start')
                     self.mqtt_thread.broadcast_command('project:task ' + task.name + ' start at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
                 # elif action.type == 'stop':
                   # self.mqtt_thread.broadcast_command('project:task ' + str(self._task_manager.running_task.name) + ' stop at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
@@ -184,12 +230,15 @@ class Project(threading.Thread):
 
                 elif action.type == 'idle':
                   self._task_manager.running_task.stop()
+                # elif action.type == 'stop':
+                #   self._task_manager.running_task.stop()
 
                 instruction_set = None
 
                 if action.target is not None:
                   device = self._complete_device[action.target]
                   if ((action.type == 'start' and device.status == 0) or (action.type == 'stop' and device.status == 1)):
+                    self._logger.info(f'Device {device.mac_address_in_str} {action.type}')
                     self.log_verbose('Project' + self.name + 'Task ' + task.name + ' match_condition ' + condition.type + ' trigger_action ' + action.type + ' ' + str(action.target))
                     task_info = task.get_task_info(action)
                     instruction_set = getattr(self._instruction_set, action.type, None)
@@ -223,27 +272,29 @@ class Project(threading.Thread):
                             task_info['file_name'] += '#' + str(cycle_info['name']) + '-' + str(cycle_info['count'])
                     self.log_verbose('file name ' + task_info['file_name'])
                     
-                  if instruction_set != None and len(task.parameter_set) > 0:
-                    if action.type == 'start':
-                      self._count += 1
+                  if instruction_set != None and self.get_device_parameter_set(action.target) != None:
                     for instruction in instruction_set:
                       print('instruction 1', device, instruction, datetime.now())
                       args = list(map(lambda arg: task_info[arg], instruction['arguments']))
                       target=getattr(device, instruction['method'])(*args)
                       print('instruction 2', device, instruction, datetime.now())
+                    if action.type == 'start':
+                      self._count += 1
             
             delay_time += (time() - now)
 
         # check task not running then stop
         if self.check_running_task_not_run() == True:
+          # self._logger.info(f'taskType {self._task_manager.running_task.name} {self._task_manager.running_task.type}')
           if self._task_manager.running_task.type == '':
+            self._logger.info(f'Task {self._task_manager.running_task.name} stop')
             self.mqtt_thread.broadcast_command('project:task ' + str(self._task_manager.running_task.name) + ' stop at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
           self._task_manager.running_task.stop()
         
         # check project done then close project
         if self.check_project_done() == True:
           print('project stop at', datetime.now())
-          self.close()
+          self.stop()
         
         if self._time_interval - delay_time > 0:
           sleep(self._time_interval - delay_time)
@@ -253,14 +304,19 @@ class Project(threading.Thread):
     pass
 
   def stop(self):
+    for device in self._complete_device:
+      self._complete_device[device].occupied_by_project = None
     self._task_manager.running_task.stop()
     self.mqtt_thread.broadcast_command('project:task ' + str(self._task_manager.running_task.name) + ' stop at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
     self._status = 2
     self._end_time = time()
     self._stop_flag  = True
+    self._logger.info('Project ' + self.name + ' stop')
     self.mqtt_thread.broadcast_command('project:project ' + str(self._name) + ' stop at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
 
   def close(self):
+    for device in self._complete_device:
+      self._complete_device[device].occupied_by_project = None
     self._status = 2
     self._end_time = time()
     self._stop_flag  = True
@@ -319,6 +375,18 @@ class Project(threading.Thread):
       'device': self._device,
       'task': self.task_list,
       'running_task': running_task,
-      'cycle': self._cycle
+      'cycle': self._cycle,
+      'count': self._count,
+    }
+    return data
+  
+  def info_pass_data_server(self):
+    if self._task_manager.running_task is not None:
+      running_task = self._task_manager.running_task.as_json()
+    data = {
+      'project': self._uuid,
+      'task': running_task,
+      'cycle': self._cycle,
+      'serial_number': self._count,
     }
     return data

python/biopro/project/task_manager.py

@@ -5,6 +5,7 @@ from xml.dom.expatbuilder import parseString
 import paho.mqtt.client as mqtt
 from biopro.text import *
 from .task import Task
+from biopro.db.collection import Collection
 
 _RUNTIME_COMPILE = False
 
@@ -56,12 +57,24 @@ class TaskManager():
     
     def get_index_by_uuid(self, uuid):
       return next((i for i, x in enumerate(self.task_list) if x.uuid == uuid), None)
+    
+    def check_task_is_cycle_start(self, task):
+      for index, cycle in enumerate(self._cycle_list):
+        if cycle['range'][0] == task.uuid:
+          return index
 
     def check_task_is_cycle_end(self, task):
       for index, cycle in enumerate(self._cycle_list):
         if cycle['range'][1] == task.uuid:
           return index
 
+    def check_task_in_cycle(self, task_index):
+      for index, cycle in enumerate(self._cycle_list):
+        if self.get_index_by_uuid(cycle['range'][0]) <= task_index:
+          if self.get_index_by_uuid(cycle['range'][1]) >= task_index:
+            return True
+      return False
+
     @property
     def check_list(self):
       return [self._running_task, *self._next_task]
@@ -121,6 +134,7 @@ class TaskManager():
           if self._prev_task.status == 1:
             self._prev_task.stop()
         # if reach cycle end, count < max, then go to cycle start
+        cycle_start_index = self.check_task_is_cycle_start(task)
         cycle_index = self.check_task_is_cycle_end(task)
         if cycle_index is None:
           # print('next', self._running_task.name, self._running_task.next)
@@ -135,18 +149,33 @@ class TaskManager():
           cycle = self._cycle_list[cycle_index]
           if int(cycle['count']) < int(cycle['max']):
             self._next_task.append(self.get_task_by_uuid(cycle['range'][0]))
-            cycle['count'] += 1
+            # cycle['count'] += 1
           else:
             for task_uuid in self._running_task.next:
               _task = next((task for task in self._task_list if task.uuid == task_uuid), None)
               if _task != None:
                 _task.reset()
                 self._next_task.append(_task)
-            cycle['count'] = 1
+            # cycle['count'] = 1
+
+        if cycle_start_index != None:
+            cycle = self._cycle_list[cycle_start_index]
+            if int(cycle['count']) < int(cycle['max']):
+              cycle['count'] += 1
+            else:
+              cycle['count'] = 1
 
       except RuntimeError as e:
         print(e)
 
     def get_task(self, task_id):
       return self._task_list[task_id]
-  
+  
+    def create_collection(self, parent):
+      for index, task in enumerate(self._task_list):
+        if self.check_task_in_cycle(index) == True:
+          if task.type == '':
+            collection = Collection.create_collection(task.name, {"folder": [parent.id]})
+            task.parent = {"folder": [collection.id]}
+        else:
+          task.parent = {"folder": [parent.id]}

python/biopro/recording/file.py

@@ -118,7 +118,7 @@ class RecordingMetaFile(JsonSerialize):
                  '_dirty', '_last_modify_time', '_file_size_cache',
                  '_recording_file_ch', '_recording_sub_file', '_size',
                  '_parameter', '_parent', '_recording_file_name', '_recording_sub_mini', '_recording_mini_ch',
-                 '_raw_serial_number', '_mini_serial_number', '_device_id')
+                 '_raw_serial_number', '_mini_serial_number', '_device_id', '_project_id')
 
     def __init__(self, filepath: Union[str, Path], data_format: bytes = None, id_db = 0, database = None):
         if isinstance(filepath, str):
@@ -153,6 +153,7 @@ class RecordingMetaFile(JsonSerialize):
         self._parent = ''
         self._recording_file_name = ''
         self._device_id = -1
+        self._project_id = None
 
         # recording parameter
         self._configuration = None
@@ -297,6 +298,7 @@ class RecordingMetaFile(JsonSerialize):
             'uuid': str(self._file_uuid),
             'data_format': 'rec',
             'device': self._device,
+            'project': self._project_id,
         }
 
         if len(self._parent) > 0:
@@ -462,7 +464,7 @@ class RecordingMetaFile(JsonSerialize):
     def parameter(self) -> str:
         return self._parameter
 
-    @device.setter
+    @parameter.setter
     def parameter(self, parameter):
         self._parameter = parameter
         return None
@@ -471,7 +473,7 @@ class RecordingMetaFile(JsonSerialize):
     def parent(self) -> str:
         return self._parent
 
-    @device.setter
+    @parent.setter
     def parent(self, parent):
         self._parent = parent
 
@@ -479,7 +481,7 @@ class RecordingMetaFile(JsonSerialize):
     def recording_file_name(self) -> str:
         return self._recording_file_name
 
-    @device.setter
+    @recording_file_name.setter
     def recording_file_name(self, recording_file_name):
         self._recording_file_name = recording_file_name
 
@@ -492,6 +494,15 @@ class RecordingMetaFile(JsonSerialize):
         self._configuration = conf
         self._dirty = True
         return None
+    
+    @property
+    def project_id(self) -> int:
+        return self._project_id
+
+    @project_id.setter
+    def project_id(self, project: int):
+        self._project_id = project
+        return None
 
     @property
     def channels(self) -> List[int]:

python/biopro/server/data.py

@@ -4,7 +4,6 @@ from time import time, sleep
 from typing import Iterable
 from datetime import datetime
 import gc
-
 import base64
 
 from biopro.data import *
@@ -27,7 +26,6 @@ from .mqtt import MqttDataMessageHandler, MqttThread
 from .database import DataBaseProcess
 from .recording import RecordingProcess
 from multiprocessing import Queue
-import queue
 
 from json import loads as json_parse, dumps as _json_stringify
 import json
@@ -317,7 +315,8 @@ class DataServer(SocketServer, DataAPI):
     def update_device_configuration(self,
                                     device: str,
                                     meta_file: Union[str, Path, RecordingMetaFile],
-                                    data_format: Union[AnyStr, DataDecodeFormat]):
+                                    data_format: Union[AnyStr, DataDecodeFormat],
+                                    project_info: str):
         # meta file
 
         device_id = -1
@@ -345,6 +344,8 @@ class DataServer(SocketServer, DataAPI):
         _parent = json_stringify(_device['parent'])
         _recording_file_name = _device['recording_file_name']
         mac_address = json.loads(device)['device_address']
+        device_id = _device['device_id']
+
         del _device['configuration']
         del _device['parent']
         del _device['recording_file_name']
@@ -354,13 +355,22 @@ class DataServer(SocketServer, DataAPI):
         # meta_file.parameter = _parameter
         # meta_file.parent = _parent
         # meta_file.recording_file_name = _recording_file_name
-        device_id = int(json.loads(device)['device_id'])
 
         if device_id < 0:
             raise ValueError('illegal device ID : ' + str(device_id))
 
         self.log_verbose('device ID', device_id)
 
+        # project binding meta file
+        # project_id = None
+        # _project = None
+        # if project_info != None:
+        #     _project = json.loads(project_info)
+        #     self.database_process.put_queue(['project_insert', device_id, _project])
+        #     result = self._queue_ds_dict[int(device_id)].get()
+        #     if result[0] == 'project_id':
+        project_id =  project_info
+
         # while len(self._configurations) <= device_id:
         #     self._configurationsappend(None)
 
@@ -380,8 +390,6 @@ class DataServer(SocketServer, DataAPI):
         else:
             data_format = data_format.name
 
-        # self.log_verbose('device data format', data_format)
-
         self.log_verbose('device meta file', meta_file)
 
         # data runtime
@@ -406,15 +414,15 @@ class DataServer(SocketServer, DataAPI):
                 c.shutdown()
                 c.join()
                 self._spi.set_wait_flag(c._device, True)
+
             data_runtime_process = RecordingProcess('data_server', self.log_verbose, device_id, 
                                                     Queue(), self._queue_ds_dict[int(device_id)], self._queue_msg, meta_file,
                                                     json_stringify(_device), _parameter, _parent, _recording_file_name,
-                                                    data_format, self.socket_mqtt_ip, self.socket_mqtt_port,
-                                                    database = self.database_process )
-            # data_runtime_process.start()
+                                                    data_format, self.socket_mqtt_ip, self.socket_mqtt_port, 
+                                                    project_id = project_id,
+                                                    database = self.database_process)
 
         # check channel
-
         if isinstance(data_runtime_process, RecordingProcess) and device_id not in self._available_channel:
             raise RuntimeError('set device configuration on un-available channel', device_id)
 

python/biopro/server/database.py

@@ -222,7 +222,8 @@ class DataBaseProcess(Process):
 
                 try:
                     sql_cursor.execute(sql_str, sql_set)
-                except:
+                except BaseException as e:
+                    print('meta create error', e)
                     self._psql_conn.commit()
                     sql_cursor.close()
                     self._queue_error.put(device_id)
@@ -249,7 +250,8 @@ class DataBaseProcess(Process):
 
                 try:
                     sql_cursor.execute(sql_str, sql_set)
-                except:
+                except BaseException as e:
+                    print('meta update error', e)
                     self._psql_conn.commit()
                     sql_cursor.close()
                     self._queue_error.put(device_id)
@@ -550,4 +552,33 @@ class DataBaseProcess(Process):
         except psycopg2.Error as e:
             print('e', e)
 
-        return True
+        return True
+    
+    def project_insert(self, device_id, _data):
+        sql_str = 'INSERT INTO "public"."project_metas" ('
+        sql_set = []
+        for item in _data.keys():
+            sql_str = sql_str + str(item) + ', '
+            if isinstance(_data[item], dict) or isinstance(_data[item], list):
+                sql_set.append(json_stringify(_data[item]))
+            else:
+                sql_set.append(_data[item])
+
+        sql_str = sql_str[0:-2] + ') VALUES ('
+        for item in _data.keys():
+            sql_str = sql_str + '%s, '
+
+        sql_str = sql_str[0:-2] + ') RETURNING id'
+        sql_cursor = self._psql_conn.cursor()
+
+        try:
+            sql_cursor.execute(sql_str, sql_set)
+        except BaseException as e:
+            print('insert error', e)
+            self._psql_conn.commit()
+            sql_cursor.close()
+            self._queue_error.put()
+        finally:
+            self._queue_ds[int(device_id)].put(['project_id', int(sql_cursor.fetchone()[0])])
+            self._psql_conn.commit()
+            sql_cursor.close()

python/biopro/server/main.py

@@ -1,6 +1,7 @@
 from time import sleep
 from typing import Iterable
 from datetime import datetime
+import json
 
 import biopro.impl.vcgencmd as vcg
 from biopro.data import DataServerOptions, DataAPI
@@ -31,8 +32,11 @@ from biopro.api.auth import AuthAPI
 from biopro.api.controller import ControllerAPI
 from biopro.api.device import DeviceAPI
 from biopro.project.project_manager import ProjectManager
-### do not import Websocket mode
-###from .websocket import WebsocketThread
+from biopro.db.base import Base, Session, engine
+from biopro.db.project_report import ProjectReport
+from biopro.db.project_meta import MetaProjectInfo
+from biopro.db.device import Device
+
 
 _RUNTIME_COMPILE = False
 
@@ -117,8 +121,8 @@ class ControlServer(SocketServer, ControlServerAPI):
             self.ups_thread = UPSDetectThread(self, c.flag_ups_wait_time)
 
         # user session
-        self._session = {}
-        self._user_session_expire = c.user_session_expire_days * 24 * 60 * 60  # sec
+        # self._session = {}
+        # self._user_session_expire = c.user_session_expire_days * 24 * 60 * 60  # sec
 
         # indicate those device together
         self._device_instruction_group = None
@@ -129,6 +133,10 @@ class ControlServer(SocketServer, ControlServerAPI):
         # _api request build
         self._api = ApiRequests()
 
+        # sqlalchemy
+        Base.metadata.create_all(engine)
+        self._session = Session()
+
     # init method
 
     def _init_file_manager(self, option: ControlServerOptions) -> FileManager:
@@ -820,16 +828,19 @@ class ControlServer(SocketServer, ControlServerAPI):
 
     @logging_info
     def device_battery(self, device:int) -> List[int]:
-        battery = {}
-        if device == 'all':
-            device_list = self.device_manager.list_device()
-            if len(device_list) > 0:
-                battery = list(map(lambda x: {"device": x.memory_board, "battery":self.device_manager.get_device(x).battery}, device_list))
-        else:
-            battery = {
-                "device": device,
-                "battery": self.device_manager.get_device(device).battery
-            }
+        try:
+            battery = {}
+            if device == 'all':
+                device_list = self.device_manager.list_device()
+                if len(device_list) > 0:
+                    battery = list(map(lambda x: {"device": x.memory_board, "battery":self.device_manager.get_device(x).battery}, device_list))
+            else:
+                battery = {
+                    "device": device,
+                    "battery": self.device_manager.get_device(device).battery
+                }
+        except AttributeError as e:
+            print('device_battery', device, 'not found', e) 
         return battery
 
     @logging_info
@@ -852,20 +863,32 @@ class ControlServer(SocketServer, ControlServerAPI):
     @logging_info
     def device_update_calibration(self, device: int) -> Union[bool, str]:
         connect_device = self.device_manager.get_device(device)
-        mac_address = connect_device.mac_address
-
+        if connect_device == None:
+            return
+        mac_address = address_str(connect_device.mac_address)
+        device = Device.get_device({"mac_address": mac_address})
         try:
-            if connect_device.library.name.startswith('Neulive3.'):
-                connect_device.calibration_info('NeuliveThreeOne')
-            elif connect_device.library.name.startswith('Neulive'):
-                connect_device.calibration_info('TDC4VC')
-            elif connect_device.library.name.startswith('EliteEIS'):
-                connect_device.calibration_info('EISZeroOne')           
-
+            if connect_device.library.name.startswith('Elite_EIS_1.1'):
+                # update calibration version
+                connect_device._device.update_cali_version()
+                # check if is first time or calibration version is different
+                if connect_device._device._cali_version == -1 or (device.calibration_version != connect_device._device._cali_version):
+                    # get calibration info from device
+                    connect_device.calibration_info('EISZeroOne')
+                    # update_calibration_info
+                    Device.update_device(
+                        { "mac_address": mac_address }, 
+                        {
+                            'calibration': connect_device.calibration ,
+                            'calibration_version': connect_device._device._cali_version
+                        }
+                    )
+                else:
+                    connect_device._device._coeff = device.calibration
         except BaseException as e:
             # reset device info in db
             DeviceAPI.updateByMac(
-                address_str(mac_address),
+                mac_address,
                 {   
                     'connect_id': -1,
                     'connect_status': 'idle',
@@ -877,14 +900,6 @@ class ControlServer(SocketServer, ControlServerAPI):
             print(e)
             return False
         else:
-            # update_calibration_info
-            DeviceAPI.updateByMac(
-                address_str(mac_address),
-                {   
-                    'calibration': str(connect_device.calibration)
-                }
-            )
-            # DeviceAPI.updateByAttrs('connect_status', 'update', {"connect_status": 'connect'})
             return True
 
     @logging_info
@@ -1021,8 +1036,17 @@ class ControlServer(SocketServer, ControlServerAPI):
     @logging_info
     def run_project(self, project) -> bool:
         if project is not None:
-            # print(project)
             project = self._project_manager.create(project)
+            with self._session as session:
+                    project_report = ProjectReport(
+                        name = project.name,
+                        uuid = project.uuid,
+                        cycle = project.cycle,
+                        task = project.task_list,
+                        device = project.device
+                    )
+                    session.add(project_report)
+                    session.commit()
             self._project_manager.run_project(project)
         return  project.as_json()
     
@@ -1064,6 +1088,10 @@ class ControlServer(SocketServer, ControlServerAPI):
 
         elif oper == InternalInstruction.PREDEFINED_DISABLE_CACHE:
             return True
+        
+        elif oper == InternalInstruction.PREDEFINED_IDLE:
+            device.status = 1
+            return True
 
         else:
             return False
@@ -1078,6 +1106,8 @@ class ControlServer(SocketServer, ControlServerAPI):
         self.log_verbose('update data format', value)
 
         client = self.data_server.client()
+        project = None
+        project_meta_id = None
         if client is not None:
             info = self.file_manager.use(device)
 
@@ -1088,9 +1118,13 @@ class ControlServer(SocketServer, ControlServerAPI):
                 filename = self._file_save_cache.get(device.device_id, self.TEMP_FILENAME_EXPR)
                 filename = format_filename(filename, device)
                 info = self.file_manager.save(device, filename)
-
+            
+            if device.occupied_by_project != None:
+                project = self.project_manager.get(device.occupied_by_project).info_pass_data_server()
+                project_meta_id = MetaProjectInfo.create_project_meta(project)      
+                
             with client:
-                client.update_device_configuration(device, info.meta_file, value)
+                client.update_device_configuration(device, info.meta_file, value, project_meta_id)
 
     def _device_set_disable_cache(self, device: CompletedDevice, disable):
         if disable:
@@ -1124,7 +1158,6 @@ class ControlServer(SocketServer, ControlServerAPI):
                         filename = format_filename(self.TEMP_FILENAME_EXPR, device)
                         info = self.file_manager.save(device, filename)
                         client.update_device_configuration(device, info.meta_file, RawDataDecoder())
-
                     if self._device_instruction_group is None:
                         client.start_sync(device)
                     

python/biopro/server/recording.py

@@ -44,7 +44,9 @@ class RecordingProcess(Process):
     def __init__(self, client_id: str, log_verbose, device_id, queue_rec, queue_ds, queue_msg, meta_path, 
                     device_info, parameter, parent, recording_file_name, data_format,
                     mqtt_ip, mqtt_port,
-                    name = 'Recording-Process', database = None):
+                    name = 'Recording-Process', 
+                    project_id = None,
+                    database = None):
         super(RecordingProcess, self).__init__(name = name)
 
         self._database = database
@@ -57,6 +59,7 @@ class RecordingProcess(Process):
         self._meta_file._parent = parent
         self._meta_file._recording_file_name = recording_file_name
         self._meta_file._device_id = device_id
+        self._meta_file._project_id = project_id
         print(self._meta_file._device, self._meta_file._parameter, self._meta_file._parent, self._meta_file._filepath)
         self._meta_file.write(self._database)
 
@@ -155,7 +158,6 @@ class RecordingProcess(Process):
         elif isinstance(decoder, EISZeroOneDataDecoder):
             # get amp_gain from meta file
             decoder._mode = self._meta_file.configuration.get_parameter('MODE')
-            decoder._ac_amp = self._meta_file.configuration.get_parameter('EIS_AC_AMP')
 
         return decoder
 

python/res/devlib/json/Elite_BAT_1.0.devlib.json

@@ -6,7 +6,7 @@
     "major_product_number": 0,
     "minor_product_number": 3,
     "major_version_number": 1,
-    "minor_version_number": 0
+    "minor_version_number": 1
   },
   "constant": {
     "TIME_MAX": 100000,
@@ -780,7 +780,7 @@
         "expression": "VALUE"
       }
     },
-    "VOLT_VSCAN": {
+    "CA_VOLT": {
       "description": "Voltage of VScan",
       "record_meta": true,
       "initial": 25000,
@@ -1301,7 +1301,7 @@
     "curve_const_vscan": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_VSCAN",
+        "va": "CA_VOLT",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",

python/res/devlib/json/Elite_EDC_1.5.devlib.json

@@ -33,6 +33,7 @@
         0,
         1,
         1,
+        1,
         1
       ],
       "domain": {
@@ -617,7 +618,8 @@
         "Open Circuit Potential",
         "Pulse Sensing",
         "Differential Pulse Voltammetry (DPV)",
-        "Chronopotentiometry"
+        "Chronopotentiometry",
+        "Idle"
       ]
     },
     "VOLT_ORIGIN": {
@@ -818,7 +820,7 @@
         "expression": "VALUE"
       }
     },
-    "VOLT_VSCAN": {
+    "CA_VOLT": {
       "description": "Voltage of VScan",
       "record_meta": true,
       "initial": 25000,
@@ -949,6 +951,7 @@
           "10": "cali_dac_test",
           "11": "cali_adc_test",
           "12": "",
+          "17": "idle",
           "*": "start_data"
         }
       }
@@ -976,6 +979,9 @@
       "VIS_STI",
       "_cdr('1X;4X>ADC_VALUE_I')"
     ],
+    "idle": [
+      "_idle()"
+    ],
     "start_data": [
       "data_format",
       "_notify(True)",
@@ -1023,7 +1029,7 @@
           "6": "const_current",
           "7": "curve_cv3",
           "8": "curve_lsv",
-          "9": "curve_const_vscan",
+          "9": "curve_ca",
           "13": "curve_ocp",
           "14": "curve_pulse_sensing",
           "15": "curve_dpv",
@@ -1360,10 +1366,10 @@
         "2B>pe"
       ]
     },
-    "curve_const_vscan": {
+    "curve_ca": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_VSCAN",
+        "va": "CA_VOLT",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",

python/res/devlib/json/Elite_EDC_1.5r2.devlib.json

@@ -1,12 +1,12 @@
 {
-  "name": "Elite_EDC_1.5r2",
+  "name": "Elite_EDC_1.5re",
   "version": "1.2.30",
   "match_rule": {
     "local_name_pattern": "Elite.*",
     "major_product_number": 0,
     "minor_product_number": 2,
     "major_version_number": 1,
-    "minor_version_number": 8
+    "minor_version_number": 7
   },
   "constant": {
     "TIME_MAX": 100000,
@@ -33,6 +33,7 @@
         0,
         1,
         1,
+        1,
         1
       ],
       "domain": {
@@ -617,7 +618,8 @@
         "Open Circuit Potential",
         "Pulse Sensing",
         "Differential Pulse Voltammetry (DPV)",
-        "Chronopotentiometry"
+        "Chronopotentiometry",
+        "Idle"
       ]
     },
     "VOLT_ORIGIN": {
@@ -818,7 +820,7 @@
         "expression": "VALUE"
       }
     },
-    "VOLT_VSCAN": {
+    "CA_VOLT": {
       "description": "Voltage of VScan",
       "record_meta": true,
       "initial": 25000,
@@ -949,6 +951,7 @@
           "10": "cali_dac_test",
           "11": "cali_adc_test",
           "12": "",
+          "17": "idle",
           "*": "start_data"
         }
       }
@@ -976,6 +979,9 @@
       "VIS_STI",
       "_cdr('1X;4X>ADC_VALUE_I')"
     ],
+    "idle": [
+      "_idle()"
+    ],
     "start_data": [
       "data_format",
       "_notify(True)",
@@ -1023,7 +1029,7 @@
           "6": "const_current",
           "7": "curve_cv3",
           "8": "curve_lsv",
-          "9": "curve_const_vscan",
+          "9": "curve_ca",
           "13": "curve_ocp",
           "14": "curve_pulse_sensing",
           "15": "curve_dpv",
@@ -1360,10 +1366,10 @@
         "2B>pe"
       ]
     },
-    "curve_const_vscan": {
+    "curve_ca": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_VSCAN",
+        "va": "CA_VOLT",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",

python/res/devlib/json/Elite_EDC_1.5re.devlib.json

@@ -33,6 +33,7 @@
         0,
         1,
         1,
+        1,
         1
       ],
       "domain": {
@@ -617,7 +618,8 @@
         "Open Circuit Potential",
         "Pulse Sensing",
         "Differential Pulse Voltammetry (DPV)",
-        "Chronopotentiometry"
+        "Chronopotentiometry",
+        "Idle"
       ]
     },
     "VOLT_ORIGIN": {
@@ -818,7 +820,7 @@
         "expression": "VALUE"
       }
     },
-    "VOLT_VSCAN": {
+    "CA_VOLT": {
       "description": "Voltage of VScan",
       "record_meta": true,
       "initial": 25000,
@@ -949,6 +951,7 @@
           "10": "cali_dac_test",
           "11": "cali_adc_test",
           "12": "",
+          "17": "idle",
           "*": "start_data"
         }
       }
@@ -976,6 +979,9 @@
       "VIS_STI",
       "_cdr('1X;4X>ADC_VALUE_I')"
     ],
+    "idle": [
+      "_idle()"
+    ],
     "start_data": [
       "data_format",
       "_notify(True)",
@@ -1023,7 +1029,7 @@
           "6": "const_current",
           "7": "curve_cv3",
           "8": "curve_lsv",
-          "9": "curve_const_vscan",
+          "9": "curve_ca",
           "13": "curve_ocp",
           "14": "curve_pulse_sensing",
           "15": "curve_dpv",
@@ -1360,10 +1366,10 @@
         "2B>pe"
       ]
     },
-    "curve_const_vscan": {
+    "curve_ca": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_VSCAN",
+        "va": "CA_VOLT",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",

python/res/devlib/json/Elite_EIS_1.0.devlib.json

@@ -26,11 +26,44 @@
         "expression": "VALUE"
       }
     },
-    "CHANNEL": {
-      "derzteription": "record channels",
+    "HIGHZ_TABLE": {
+      "initial": [
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1
+      ],
+      "domain": {
+        "list": [
+          100
+        ]
+      },
+      "value": "VALUE"
+    },
+    "CTRL_HIGH_Z_15": {
+      "description": "ctrl highZ level",
       "record_meta": true,
-      "domain": "property",
-      "value": "[0, 1, 2]"
+      "initial": 1,
+      "value": [
+        "On",
+        "Off"
+      ],
+      "on_change": "set_ctrl_highZ"
+    },
+    "CYCLE_NUMBER": {
+      "description": "CV cycle number",
+      "record_meta": true,
+      "initial": 1,
+      "domain": [
+        65536
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
     },
     "SAMPLE_RATE": {
       "description": "data sampling rate",
@@ -44,6 +77,12 @@
       },
       "on_change": "set_sample_rate"
     },
+    "CHANNEL": {
+      "derzteription": "record channels",
+      "record_meta": true,
+      "domain": "property",
+      "value": "[0, 1, 2]"
+    },
     "AMP_GAIN": {
       "description": "amp gain",
       "record_meta": true,
@@ -59,22 +98,41 @@
         "Chronoamperometric",
         "V-T Graph",
         "R-T Graph",
-        "Dev Mode"
+        "EIS constant frequency",
+        "Dev Mode",
+        "Idle"
       ]
     },
     "GENERAL_HS_RTIA": {
       "description": "High speed rtia gain",
       "record_meta": true,
-      "initial": 4,
+      "initial": 8,
       "value": [
         0,
         1,
         2,
         3,
-        4
+        4,
+        5,
+        6,
+        7,
+        8
       ],
       "on_change": "set_general_hs_rtia"
     },
+    "GENERAL_LP_RTIA": {
+      "description": "Low power rtia gain",
+      "record_meta": true,
+      "initial": 4,
+      "value": [
+        "0",
+        "1",
+        "2",
+        "3",
+        "auto"
+      ],
+      "on_change": "set_general_lp_rtia"
+    },
     "EIS_DC_BIAS": {
       "description": "DC voltage bias",
       "record_meta": true,
@@ -89,7 +147,7 @@
     "EIS_AC_AMP": {
       "description": "AC Amplitude",
       "record_meta": true,
-      "initial": 25,
+      "initial": 26,
       "domain": [
         2048
       ]
@@ -147,57 +205,76 @@
         8
       ]
     },
-
-    "ADC_VALUE_I": {
-      "description": "ADC value current value",
-      "domain": "int"
-    },
-    "Scan_Rate": {
-      "description": "Voltage Scan Rate",
+    "CF_DC_BIAS": {
+      "description": "DC voltage bias",
       "record_meta": true,
-      "initial": 10000,
+      "initial": 25000,
       "domain": [
-        100001
+        "VOLT_MAX"
       ],
       "value": {
         "expression": "VALUE"
       }
     },
-    "CTRL_HIGH_Z_15": {
-      "description": "ctrl highZ level",
+    "CF_AC_AMP": {
+      "description": "AC Amplitude",
       "record_meta": true,
-      "initial": 1,
-      "value": [
-        "On",
-        "Off"
-      ],
-      "on_change": "set_ctrl_highZ"
-    },
-    "ADC_LEVEL_I_15": {
-      "description": "ADC level",
-      "record_meta": true,
-      "initial": 4,
-      "value": [
-        "0",
-        "1",
-        "2",
-        "3",
-        "auto"
-      ],
-      "on_change": "set_adc_gain_I"
-    },
-    "ADC_LEVEL_V_IN_15": {
-      "description": "ADC level",
-      "record_meta": true,
-      "initial": 3,
-      "value": [
-        "0",
-        "1",
-        "2",
-        "auto"
+      "initial": 26,
+      "domain": [
+        2048
       ]
     },
-    "VOLT_INITIAL": {
+    "CF_FREQ": {
+      "description": "frequency of cf",
+      "record_meta": true,
+      "initial": 13333333,
+      "domain": [
+        "FREQ_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CF_PPD": {
+      "description": "Point per decades",
+      "record_meta": true,
+      "initial": 10,
+      "domain": [
+        11
+      ]
+    },
+    "CF_SCALE": {
+      "description": "Point spacing pattern",
+      "record_meta": true,
+      "initial": 0,
+      "value": [
+        0,
+        1
+      ]
+    },
+    "CF_DELAY": {
+      "description": "Wait x peroid before start taking measurements",
+      "record_meta": true,
+      "initial": 0,
+      "domain": [
+        101
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CF_AVERAGE_NUM": {
+      "description": "Number of sample used for average funciton",
+      "record_meta": true,
+      "initial": 8,
+      "value": [
+        2,
+        4,
+        6,
+        8
+      ]
+    },
+    "CV_E_INITIAL": {
       "description": "Initial Voltage of Scan",
       "record_meta": true,
       "initial": 25000,
@@ -208,8 +285,8 @@
         "expression": "VALUE"
       }
     },
-    "VOLT_MAX": {
-      "description": "Max Voltage of Scan",
+    "CV_E1": {
+      "description": "First voltage of Scan",
       "record_meta": true,
       "initial": 25000,
       "domain": [
@@ -219,8 +296,8 @@
         "expression": "VALUE"
       }
     },
-    "VOLT_MIN": {
-      "description": "Min Voltage of Scan",
+    "CV_E2": {
+      "description": "Second voltage of Scan",
       "record_meta": true,
       "initial": 25000,
       "domain": [
@@ -230,19 +307,19 @@
         "expression": "VALUE"
       }
     },
-    "CYCLE_NUMBER": {
-      "description": "CV cycle number",
+    "CV_SCAN_RATE": {
+      "description": "Voltage scan rate",
       "record_meta": true,
-      "initial": 1,
+      "initial": 10000,
       "domain": [
-        65536
+        100001
       ],
       "value": {
         "expression": "VALUE"
       }
     },
-    "VOLT_VSCAN": {
-      "description": "Voltage of VScan",
+    "CA_VOLT": {
+      "description": "Voltage of ca",
       "record_meta": true,
       "initial": 25000,
       "domain": [
@@ -252,7 +329,7 @@
         "expression": "VALUE"
       }
     },
-    "MEASURE_VIN_RANGE": {
+    "VT_MEASURE_VIN_RANGE": {
       "description": "measure range of Vin",
       "record_meta": true,
       "initial": 0,
@@ -275,6 +352,10 @@
       },
       "on_change": "set_para_RT_VOLT_SET"
     },
+    "ADC_VALUE_I": {
+      "description": "ADC value current value",
+      "domain": "int"
+    },
     "BLE_WRITE": {
       "description": "send msg to elite",
       "domain": {
@@ -295,20 +376,26 @@
       {
         "expression": "MODE",
         "when": {
+          "7": "idle",
           "*": "start_data"
         }
       }
     ],
+    "idle": [
+      "_idle()"
+    ],
     "start_data": [
       "data_format_cali",
       "_notify(True)",
       {
         "expression": "MODE",
         "when": {
-          "1": "set_general_hs_rtia",
-          "2": "set_adc_gain_I",
-          "3": "set_adc_gain_I",
-          "4": "set_adc_gain_I"
+          "0": "set_general_hs_rtia",
+          "1": "set_general_lp_rtia",
+          "2": "set_general_lp_rtia",
+          "3": "set_general_lp_rtia",
+          "4": "set_general_lp_rtia",
+          "5": "set_general_hs_rtia"
         }
       },
       {
@@ -316,22 +403,25 @@
         "when": {
           "0": "curve_eis",
           "1": "curve_cv3",
-          "2": "curve_const_vscan",
+          "2": "curve_ca",
           "3": "curve_vt",
-          "4": "curve_rt"
+          "4": "curve_rt",
+          "5": "curve_cf"
         }
       },
       {
         "expression": "MODE",
         "when": {
           "0": "curve_eis_para2",
-          "1": "curve_cv3_para2"
+          "1": "curve_cv3_para2",
+          "5": "curve_cf_para2"
         }
       },
       {
         "expression": "MODE",
         "when": {
-          "0": "curve_eis_mode"
+          "0": "curve_eis_mode",
+          "5": "curve_cf_mode"
         }
       },
       "_sync(True)",
@@ -357,6 +447,12 @@
         "1XFF;1X70;1B>GENERAL_HS_RTIA"
       ]
     },
+    "set_general_lp_rtia": {
+      "type": "RIS",
+      "data": [
+        "1XFF;1X71;1B>GENERAL_LP_RTIA"
+      ]
+    },
     "set_sample_rate": {
       "type": "RIS",
       "parameter": {
@@ -366,16 +462,10 @@
         "XE0;2B>va"
       ]
     },
-    "set_adc_gain_I": {
-      "type": "RIS",
-      "data": [
-        "XE1;X05;B>ADC_LEVEL_I_15"
-      ]
-    },
     "set_ctrl_highZ": {
       "type": "RIS",
       "data": [
-        "XE1;X03;B>CTRL_HIGH_Z_15"
+        "1XFF;1X72;1B>CTRL_HIGH_Z_15"
       ]
     },
     "curve_eis": {
@@ -418,13 +508,51 @@
         "1X12;1XFF"
       ]
     },
+    "curve_cf": {
+      "type": "RIS",
+      "parameter": {
+        "fa": "CF_FREQ",
+        "dp": "CF_DELAY",
+        "dc": "CF_DC_BIAS",
+        "am": "CF_AC_AMP",
+        "an": "CF_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "CF_PPD",
+        "sp": "CF_SCALE"
+      },
+      "data": [
+        "1X13;1X01;4B>fa;4B>0;2B>dp"
+      ]
+    },
+    "curve_cf_para2": {
+      "type": "RIS",
+      "parameter": {
+        "fa": "CF_FREQ",
+        "dp": "CF_DELAY",
+        "dc": "CF_DC_BIAS",
+        "am": "CF_AC_AMP",
+        "an": "CF_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "CF_PPD",
+        "sp": "CF_SCALE"
+      },
+      "data": [
+        "1X13;1X02;2B>dc;2B>am;B>an;B>rt;2B>pp;B>sp"
+      ]
+    },
+    "curve_cf_mode": {
+      "type": "RIS",
+      "data": [
+        "1X13;1XFF"
+      ]
+    },
     "curve_cv3": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_INITIAL",
-        "vb": "VOLT_MAX",
-        "vc": "VOLT_MIN",
-        "ve": "Scan_Rate",
+        "va": "CV_E_INITIAL",
+        "vb": "CV_E1",
+        "vc": "CV_E2",
+        "ve": "CV_SCAN_RATE",
         "vf": "SAMPLE_RATE",
         "cn": "CYCLE_NUMBER"
       },
@@ -435,10 +563,10 @@
     "curve_cv3_para2": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_INITIAL",
-        "vb": "VOLT_MAX",
-        "vc": "VOLT_MIN",
-        "ve": "Scan_Rate",
+        "va": "CV_E_INITIAL",
+        "vb": "CV_E1",
+        "vc": "CV_E2",
+        "ve": "CV_SCAN_RATE",
         "vf": "SAMPLE_RATE",
         "cn": "CYCLE_NUMBER"
       },
@@ -446,19 +574,18 @@
         "1X09;1X02;4B>ve;2B>vf;2B>cn"
       ]
     },
-    "curve_const_vscan": {
+    "curve_ca": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_VSCAN",
-        "pa": "ADC_LEVEL_I_15",
-        "pb": "ADC_LEVEL_V_IN_15",
+        "va": "CA_VOLT",
+        "pa": "GENERAL_LP_RTIA",
         "pd": "CTRL_HIGH_Z_15",
         "pe": "SAMPLE_RATE"
       },
       "data": [
         "1X0B;",
         "2B>va;",
-        "4b>pa;4b>pb;",
+        "4b>pa;4b>0;",
         "4b>0;4b>pd;",
         "2B>pe"
       ]
@@ -467,15 +594,14 @@
       "type": "RIS",
       "parameter": {
         "va": "RT_VOLT_SET",
-        "pa": "ADC_LEVEL_I_15",
-        "pb": "ADC_LEVEL_V_IN_15",
+        "pa": "GENERAL_LP_RTIA",
         "pd": "CTRL_HIGH_Z_15",
         "pe": "SAMPLE_RATE"
       },
       "data": [
         "X04;",
         "2B>va;",
-        "4b>pa;4b>pb;",
+        "4b>pa;4b>0;",
         "4b>0;4b>pd;",
         "2B>pe"
       ]
@@ -483,15 +609,14 @@
     "curve_vt": {
       "type": "RIS",
       "parameter": {
-        "pa": "ADC_LEVEL_I_15",
-        "pb": "ADC_LEVEL_V_IN_15",
+        "pa": "GENERAL_LP_RTIA",
         "pd": "CTRL_HIGH_Z_15",
         "pe": "SAMPLE_RATE",
-        "va": "MEASURE_VIN_RANGE"
+        "va": "VT_MEASURE_VIN_RANGE"
       },
       "data": [
         "X05;",
-        "4b>pa;4b>pb;",
+        "4b>pa;4b>0;",
         "4b>0;4b>pd;",
         "2B>pe;",
         "1B>va"

python/res/devlib/json/Elite_EIS_1.1.devlib.json

@@ -26,11 +26,44 @@
         "expression": "VALUE"
       }
     },
-    "CHANNEL": {
-      "derzteription": "record channels",
+    "HIGHZ_TABLE": {
+      "initial": [
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1
+      ],
+      "domain": {
+        "list": [
+          100
+        ]
+      },
+      "value": "VALUE"
+    },
+    "CTRL_HIGH_Z_15": {
+      "description": "ctrl highZ level",
       "record_meta": true,
-      "domain": "property",
-      "value": "[0, 1, 2]"
+      "initial": 1,
+      "value": [
+        "On",
+        "Off"
+      ],
+      "on_change": "set_ctrl_highZ"
+    },
+    "CYCLE_NUMBER": {
+      "description": "CV cycle number",
+      "record_meta": true,
+      "initial": 1,
+      "domain": [
+        65536
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
     },
     "SAMPLE_RATE": {
       "description": "data sampling rate",
@@ -44,6 +77,12 @@
       },
       "on_change": "set_sample_rate"
     },
+    "CHANNEL": {
+      "derzteription": "record channels",
+      "record_meta": true,
+      "domain": "property",
+      "value": "[0, 1, 2]"
+    },
     "AMP_GAIN": {
       "description": "amp gain",
       "record_meta": true,
@@ -59,22 +98,41 @@
         "Chronoamperometric",
         "V-T Graph",
         "R-T Graph",
-        "Dev Mode"
+        "EIS constant frequency",
+        "Dev Mode",
+        "Idle"
       ]
     },
     "GENERAL_HS_RTIA": {
       "description": "High speed rtia gain",
       "record_meta": true,
-      "initial": 4,
+      "initial": 8,
       "value": [
         0,
         1,
         2,
         3,
-        4
+        4,
+        5,
+        6,
+        7,
+        8
       ],
       "on_change": "set_general_hs_rtia"
     },
+    "GENERAL_LP_RTIA": {
+      "description": "Low power rtia gain",
+      "record_meta": true,
+      "initial": 4,
+      "value": [
+        "0",
+        "1",
+        "2",
+        "3",
+        "auto"
+      ],
+      "on_change": "set_general_lp_rtia"
+    },
     "EIS_DC_BIAS": {
       "description": "DC voltage bias",
       "record_meta": true,
@@ -89,7 +147,7 @@
     "EIS_AC_AMP": {
       "description": "AC Amplitude",
       "record_meta": true,
-      "initial": 25,
+      "initial": 26,
       "domain": [
         2048
       ]
@@ -147,57 +205,76 @@
         8
       ]
     },
-
-    "ADC_VALUE_I": {
-      "description": "ADC value current value",
-      "domain": "int"
-    },
-    "Scan_Rate": {
-      "description": "Voltage Scan Rate",
+    "CF_DC_BIAS": {
+      "description": "DC voltage bias",
       "record_meta": true,
-      "initial": 10000,
+      "initial": 25000,
       "domain": [
-        100001
+        "VOLT_MAX"
       ],
       "value": {
         "expression": "VALUE"
       }
     },
-    "CTRL_HIGH_Z_15": {
-      "description": "ctrl highZ level",
+    "CF_AC_AMP": {
+      "description": "AC Amplitude",
       "record_meta": true,
-      "initial": 1,
-      "value": [
-        "On",
-        "Off"
-      ],
-      "on_change": "set_ctrl_highZ"
-    },
-    "ADC_LEVEL_I_15": {
-      "description": "ADC level",
-      "record_meta": true,
-      "initial": 4,
-      "value": [
-        "0",
-        "1",
-        "2",
-        "3",
-        "auto"
-      ],
-      "on_change": "set_adc_gain_I"
-    },
-    "ADC_LEVEL_V_IN_15": {
-      "description": "ADC level",
-      "record_meta": true,
-      "initial": 3,
-      "value": [
-        "0",
-        "1",
-        "2",
-        "auto"
+      "initial": 26,
+      "domain": [
+        2048
       ]
     },
-    "VOLT_INITIAL": {
+    "CF_FREQ": {
+      "description": "frequency of cf",
+      "record_meta": true,
+      "initial": 13333333,
+      "domain": [
+        "FREQ_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CF_PPD": {
+      "description": "Point per decades",
+      "record_meta": true,
+      "initial": 10,
+      "domain": [
+        11
+      ]
+    },
+    "CF_SCALE": {
+      "description": "Point spacing pattern",
+      "record_meta": true,
+      "initial": 0,
+      "value": [
+        0,
+        1
+      ]
+    },
+    "CF_DELAY": {
+      "description": "Wait x peroid before start taking measurements",
+      "record_meta": true,
+      "initial": 0,
+      "domain": [
+        101
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CF_AVERAGE_NUM": {
+      "description": "Number of sample used for average funciton",
+      "record_meta": true,
+      "initial": 8,
+      "value": [
+        2,
+        4,
+        6,
+        8
+      ]
+    },
+    "CV_E_INITIAL": {
       "description": "Initial Voltage of Scan",
       "record_meta": true,
       "initial": 25000,
@@ -208,8 +285,8 @@
         "expression": "VALUE"
       }
     },
-    "VOLT_MAX": {
-      "description": "Max Voltage of Scan",
+    "CV_E1": {
+      "description": "First voltage of Scan",
       "record_meta": true,
       "initial": 25000,
       "domain": [
@@ -219,8 +296,8 @@
         "expression": "VALUE"
       }
     },
-    "VOLT_MIN": {
-      "description": "Min Voltage of Scan",
+    "CV_E2": {
+      "description": "Second voltage of Scan",
       "record_meta": true,
       "initial": 25000,
       "domain": [
@@ -230,19 +307,19 @@
         "expression": "VALUE"
       }
     },
-    "CYCLE_NUMBER": {
-      "description": "CV cycle number",
+    "CV_SCAN_RATE": {
+      "description": "Voltage scan rate",
       "record_meta": true,
-      "initial": 1,
+      "initial": 10000,
       "domain": [
-        65536
+        100001
       ],
       "value": {
         "expression": "VALUE"
       }
     },
-    "VOLT_VSCAN": {
-      "description": "Voltage of VScan",
+    "CA_VOLT": {
+      "description": "Voltage of ca",
       "record_meta": true,
       "initial": 25000,
       "domain": [
@@ -252,7 +329,7 @@
         "expression": "VALUE"
       }
     },
-    "MEASURE_VIN_RANGE": {
+    "VT_MEASURE_VIN_RANGE": {
       "description": "measure range of Vin",
       "record_meta": true,
       "initial": 0,
@@ -275,6 +352,10 @@
       },
       "on_change": "set_para_RT_VOLT_SET"
     },
+    "ADC_VALUE_I": {
+      "description": "ADC value current value",
+      "domain": "int"
+    },
     "BLE_WRITE": {
       "description": "send msg to elite",
       "domain": {
@@ -295,20 +376,26 @@
       {
         "expression": "MODE",
         "when": {
+          "7": "idle",
           "*": "start_data"
         }
       }
     ],
+    "idle": [
+      "_idle()"
+    ],
     "start_data": [
       "data_format_cali",
       "_notify(True)",
       {
         "expression": "MODE",
         "when": {
-          "1": "set_general_hs_rtia",
-          "2": "set_adc_gain_I",
-          "3": "set_adc_gain_I",
-          "4": "set_adc_gain_I"
+          "0": "set_general_hs_rtia",
+          "1": "set_general_lp_rtia",
+          "2": "set_general_lp_rtia",
+          "3": "set_general_lp_rtia",
+          "4": "set_general_lp_rtia",
+          "5": "set_general_hs_rtia"
         }
       },
       {
@@ -316,22 +403,25 @@
         "when": {
           "0": "curve_eis",
           "1": "curve_cv3",
-          "2": "curve_const_vscan",
+          "2": "curve_ca",
           "3": "curve_vt",
-          "4": "curve_rt"
+          "4": "curve_rt",
+          "5": "curve_cf"
         }
       },
       {
         "expression": "MODE",
         "when": {
           "0": "curve_eis_para2",
-          "1": "curve_cv3_para2"
+          "1": "curve_cv3_para2",
+          "5": "curve_cf_para2"
         }
       },
       {
         "expression": "MODE",
         "when": {
-          "0": "curve_eis_mode"
+          "0": "curve_eis_mode",
+          "5": "curve_cf_mode"
         }
       },
       "_sync(True)",
@@ -357,6 +447,12 @@
         "1XFF;1X70;1B>GENERAL_HS_RTIA"
       ]
     },
+    "set_general_lp_rtia": {
+      "type": "RIS",
+      "data": [
+        "1XFF;1X71;1B>GENERAL_LP_RTIA"
+      ]
+    },
     "set_sample_rate": {
       "type": "RIS",
       "parameter": {
@@ -366,16 +462,10 @@
         "XE0;2B>va"
       ]
     },
-    "set_adc_gain_I": {
-      "type": "RIS",
-      "data": [
-        "XE1;X05;B>ADC_LEVEL_I_15"
-      ]
-    },
     "set_ctrl_highZ": {
       "type": "RIS",
       "data": [
-        "XE1;X03;B>CTRL_HIGH_Z_15"
+        "1XFF;1X72;1B>CTRL_HIGH_Z_15"
       ]
     },
     "curve_eis": {
@@ -418,13 +508,51 @@
         "1X12;1XFF"
       ]
     },
+    "curve_cf": {
+      "type": "RIS",
+      "parameter": {
+        "fa": "CF_FREQ",
+        "dp": "CF_DELAY",
+        "dc": "CF_DC_BIAS",
+        "am": "CF_AC_AMP",
+        "an": "CF_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "CF_PPD",
+        "sp": "CF_SCALE"
+      },
+      "data": [
+        "1X13;1X01;4B>fa;4B>0;2B>dp"
+      ]
+    },
+    "curve_cf_para2": {
+      "type": "RIS",
+      "parameter": {
+        "fa": "CF_FREQ",
+        "dp": "CF_DELAY",
+        "dc": "CF_DC_BIAS",
+        "am": "CF_AC_AMP",
+        "an": "CF_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "CF_PPD",
+        "sp": "CF_SCALE"
+      },
+      "data": [
+        "1X13;1X02;2B>dc;2B>am;B>an;B>rt;2B>pp;B>sp"
+      ]
+    },
+    "curve_cf_mode": {
+      "type": "RIS",
+      "data": [
+        "1X13;1XFF"
+      ]
+    },
     "curve_cv3": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_INITIAL",
-        "vb": "VOLT_MAX",
-        "vc": "VOLT_MIN",
-        "ve": "Scan_Rate",
+        "va": "CV_E_INITIAL",
+        "vb": "CV_E1",
+        "vc": "CV_E2",
+        "ve": "CV_SCAN_RATE",
         "vf": "SAMPLE_RATE",
         "cn": "CYCLE_NUMBER"
       },
@@ -435,10 +563,10 @@
     "curve_cv3_para2": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_INITIAL",
-        "vb": "VOLT_MAX",
-        "vc": "VOLT_MIN",
-        "ve": "Scan_Rate",
+        "va": "CV_E_INITIAL",
+        "vb": "CV_E1",
+        "vc": "CV_E2",
+        "ve": "CV_SCAN_RATE",
         "vf": "SAMPLE_RATE",
         "cn": "CYCLE_NUMBER"
       },
@@ -446,19 +574,18 @@
         "1X09;1X02;4B>ve;2B>vf;2B>cn"
       ]
     },
-    "curve_const_vscan": {
+    "curve_ca": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_VSCAN",
-        "pa": "ADC_LEVEL_I_15",
-        "pb": "ADC_LEVEL_V_IN_15",
+        "va": "CA_VOLT",
+        "pa": "GENERAL_LP_RTIA",
         "pd": "CTRL_HIGH_Z_15",
         "pe": "SAMPLE_RATE"
       },
       "data": [
         "1X0B;",
         "2B>va;",
-        "4b>pa;4b>pb;",
+        "4b>pa;4b>0;",
         "4b>0;4b>pd;",
         "2B>pe"
       ]
@@ -467,15 +594,14 @@
       "type": "RIS",
       "parameter": {
         "va": "RT_VOLT_SET",
-        "pa": "ADC_LEVEL_I_15",
-        "pb": "ADC_LEVEL_V_IN_15",
+        "pa": "GENERAL_LP_RTIA",
         "pd": "CTRL_HIGH_Z_15",
         "pe": "SAMPLE_RATE"
       },
       "data": [
         "X04;",
         "2B>va;",
-        "4b>pa;4b>pb;",
+        "4b>pa;4b>0;",
         "4b>0;4b>pd;",
         "2B>pe"
       ]
@@ -483,15 +609,14 @@
     "curve_vt": {
       "type": "RIS",
       "parameter": {
-        "pa": "ADC_LEVEL_I_15",
-        "pb": "ADC_LEVEL_V_IN_15",
+        "pa": "GENERAL_LP_RTIA",
         "pd": "CTRL_HIGH_Z_15",
         "pe": "SAMPLE_RATE",
-        "va": "MEASURE_VIN_RANGE"
+        "va": "VT_MEASURE_VIN_RANGE"
       },
       "data": [
         "X05;",
-        "4b>pa;4b>pb;",
+        "4b>pa;4b>0;",
         "4b>0;4b>pd;",
         "2B>pe;",
         "1B>va"

python/res/devlib/json/Elite_EIS_MINI_1.0.devlib.json

@@ -26,11 +26,44 @@
         "expression": "VALUE"
       }
     },
-    "CHANNEL": {
-      "derzteription": "record channels",
+    "HIGHZ_TABLE": {
+      "initial": [
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1
+      ],
+      "domain": {
+        "list": [
+          100
+        ]
+      },
+      "value": "VALUE"
+    },
+    "CTRL_HIGH_Z_15": {
+      "description": "ctrl highZ level",
       "record_meta": true,
-      "domain": "property",
-      "value": "[0, 1, 2]"
+      "initial": 1,
+      "value": [
+        "On",
+        "Off"
+      ],
+      "on_change": "set_ctrl_highZ"
+    },
+    "CYCLE_NUMBER": {
+      "description": "CV cycle number",
+      "record_meta": true,
+      "initial": 1,
+      "domain": [
+        65536
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
     },
     "SAMPLE_RATE": {
       "description": "data sampling rate",
@@ -44,6 +77,12 @@
       },
       "on_change": "set_sample_rate"
     },
+    "CHANNEL": {
+      "derzteription": "record channels",
+      "record_meta": true,
+      "domain": "property",
+      "value": "[0, 1, 2]"
+    },
     "AMP_GAIN": {
       "description": "amp gain",
       "record_meta": true,
@@ -59,22 +98,41 @@
         "Chronoamperometric",
         "V-T Graph",
         "R-T Graph",
-        "Dev Mode"
+        "EIS constant frequency",
+        "Dev Mode",
+        "Idle"
       ]
     },
     "GENERAL_HS_RTIA": {
       "description": "High speed rtia gain",
       "record_meta": true,
-      "initial": 4,
+      "initial": 8,
       "value": [
         0,
         1,
         2,
         3,
-        4
+        4,
+        5,
+        6,
+        7,
+        8
       ],
       "on_change": "set_general_hs_rtia"
     },
+    "GENERAL_LP_RTIA": {
+      "description": "Low power rtia gain",
+      "record_meta": true,
+      "initial": 4,
+      "value": [
+        "0",
+        "1",
+        "2",
+        "3",
+        "auto"
+      ],
+      "on_change": "set_general_lp_rtia"
+    },
     "EIS_DC_BIAS": {
       "description": "DC voltage bias",
       "record_meta": true,
@@ -89,7 +147,7 @@
     "EIS_AC_AMP": {
       "description": "AC Amplitude",
       "record_meta": true,
-      "initial": 25,
+      "initial": 26,
       "domain": [
         2048
       ]
@@ -147,57 +205,76 @@
         8
       ]
     },
-
-    "ADC_VALUE_I": {
-      "description": "ADC value current value",
-      "domain": "int"
-    },
-    "Scan_Rate": {
-      "description": "Voltage Scan Rate",
+    "CF_DC_BIAS": {
+      "description": "DC voltage bias",
       "record_meta": true,
-      "initial": 10000,
+      "initial": 25000,
       "domain": [
-        100001
+        "VOLT_MAX"
       ],
       "value": {
         "expression": "VALUE"
       }
     },
-    "CTRL_HIGH_Z_15": {
-      "description": "ctrl highZ level",
+    "CF_AC_AMP": {
+      "description": "AC Amplitude",
       "record_meta": true,
-      "initial": 1,
-      "value": [
-        "On",
-        "Off"
-      ],
-      "on_change": "set_ctrl_highZ"
-    },
-    "ADC_LEVEL_I_15": {
-      "description": "ADC level",
-      "record_meta": true,
-      "initial": 4,
-      "value": [
-        "0",
-        "1",
-        "2",
-        "3",
-        "auto"
-      ],
-      "on_change": "set_adc_gain_I"
-    },
-    "ADC_LEVEL_V_IN_15": {
-      "description": "ADC level",
-      "record_meta": true,
-      "initial": 3,
-      "value": [
-        "0",
-        "1",
-        "2",
-        "auto"
+      "initial": 26,
+      "domain": [
+        2048
       ]
     },
-    "VOLT_INITIAL": {
+    "CF_FREQ": {
+      "description": "frequency of cf",
+      "record_meta": true,
+      "initial": 13333333,
+      "domain": [
+        "FREQ_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CF_PPD": {
+      "description": "Point per decades",
+      "record_meta": true,
+      "initial": 10,
+      "domain": [
+        11
+      ]
+    },
+    "CF_SCALE": {
+      "description": "Point spacing pattern",
+      "record_meta": true,
+      "initial": 0,
+      "value": [
+        0,
+        1
+      ]
+    },
+    "CF_DELAY": {
+      "description": "Wait x peroid before start taking measurements",
+      "record_meta": true,
+      "initial": 0,
+      "domain": [
+        101
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CF_AVERAGE_NUM": {
+      "description": "Number of sample used for average funciton",
+      "record_meta": true,
+      "initial": 8,
+      "value": [
+        2,
+        4,
+        6,
+        8
+      ]
+    },
+    "CV_E_INITIAL": {
       "description": "Initial Voltage of Scan",
       "record_meta": true,
       "initial": 25000,
@@ -208,8 +285,8 @@
         "expression": "VALUE"
       }
     },
-    "VOLT_MAX": {
-      "description": "Max Voltage of Scan",
+    "CV_E1": {
+      "description": "First voltage of Scan",
       "record_meta": true,
       "initial": 25000,
       "domain": [
@@ -219,8 +296,8 @@
         "expression": "VALUE"
       }
     },
-    "VOLT_MIN": {
-      "description": "Min Voltage of Scan",
+    "CV_E2": {
+      "description": "Second voltage of Scan",
       "record_meta": true,
       "initial": 25000,
       "domain": [
@@ -230,19 +307,19 @@
         "expression": "VALUE"
       }
     },
-    "CYCLE_NUMBER": {
-      "description": "CV cycle number",
+    "CV_SCAN_RATE": {
+      "description": "Voltage scan rate",
       "record_meta": true,
-      "initial": 1,
+      "initial": 10000,
       "domain": [
-        65536
+        100001
       ],
       "value": {
         "expression": "VALUE"
       }
     },
-    "VOLT_VSCAN": {
-      "description": "Voltage of VScan",
+    "CA_VOLT": {
+      "description": "Voltage of ca",
       "record_meta": true,
       "initial": 25000,
       "domain": [
@@ -252,7 +329,7 @@
         "expression": "VALUE"
       }
     },
-    "MEASURE_VIN_RANGE": {
+    "VT_MEASURE_VIN_RANGE": {
       "description": "measure range of Vin",
       "record_meta": true,
       "initial": 0,
@@ -275,6 +352,10 @@
       },
       "on_change": "set_para_RT_VOLT_SET"
     },
+    "ADC_VALUE_I": {
+      "description": "ADC value current value",
+      "domain": "int"
+    },
     "BLE_WRITE": {
       "description": "send msg to elite",
       "domain": {
@@ -295,20 +376,26 @@
       {
         "expression": "MODE",
         "when": {
+          "7": "idle",
           "*": "start_data"
         }
       }
     ],
+    "idle": [
+      "_idle()"
+    ],
     "start_data": [
       "data_format_cali",
       "_notify(True)",
       {
         "expression": "MODE",
         "when": {
-          "1": "set_general_hs_rtia",
-          "2": "set_adc_gain_I",
-          "3": "set_adc_gain_I",
-          "4": "set_adc_gain_I"
+          "0": "set_general_hs_rtia",
+          "1": "set_general_lp_rtia",
+          "2": "set_general_lp_rtia",
+          "3": "set_general_lp_rtia",
+          "4": "set_general_lp_rtia",
+          "5": "set_general_hs_rtia"
         }
       },
       {
@@ -316,22 +403,25 @@
         "when": {
           "0": "curve_eis",
           "1": "curve_cv3",
-          "2": "curve_const_vscan",
+          "2": "curve_ca",
           "3": "curve_vt",
-          "4": "curve_rt"
+          "4": "curve_rt",
+          "5": "curve_cf"
         }
       },
       {
         "expression": "MODE",
         "when": {
           "0": "curve_eis_para2",
-          "1": "curve_cv3_para2"
+          "1": "curve_cv3_para2",
+          "5": "curve_cf_para2"
         }
       },
       {
         "expression": "MODE",
         "when": {
-          "0": "curve_eis_mode"
+          "0": "curve_eis_mode",
+          "5": "curve_cf_mode"
         }
       },
       "_sync(True)",
@@ -357,6 +447,12 @@
         "1XFF;1X70;1B>GENERAL_HS_RTIA"
       ]
     },
+    "set_general_lp_rtia": {
+      "type": "RIS",
+      "data": [
+        "1XFF;1X71;1B>GENERAL_LP_RTIA"
+      ]
+    },
     "set_sample_rate": {
       "type": "RIS",
       "parameter": {
@@ -366,16 +462,10 @@
         "XE0;2B>va"
       ]
     },
-    "set_adc_gain_I": {
-      "type": "RIS",
-      "data": [
-        "XE1;X05;B>ADC_LEVEL_I_15"
-      ]
-    },
     "set_ctrl_highZ": {
       "type": "RIS",
       "data": [
-        "XE1;X03;B>CTRL_HIGH_Z_15"
+        "1XFF;1X72;1B>CTRL_HIGH_Z_15"
       ]
     },
     "curve_eis": {
@@ -418,13 +508,51 @@
         "1X12;1XFF"
       ]
     },
+    "curve_cf": {
+      "type": "RIS",
+      "parameter": {
+        "fa": "CF_FREQ",
+        "dp": "CF_DELAY",
+        "dc": "CF_DC_BIAS",
+        "am": "CF_AC_AMP",
+        "an": "CF_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "CF_PPD",
+        "sp": "CF_SCALE"
+      },
+      "data": [
+        "1X13;1X01;4B>fa;4B>0;2B>dp"
+      ]
+    },
+    "curve_cf_para2": {
+      "type": "RIS",
+      "parameter": {
+        "fa": "CF_FREQ",
+        "dp": "CF_DELAY",
+        "dc": "CF_DC_BIAS",
+        "am": "CF_AC_AMP",
+        "an": "CF_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "CF_PPD",
+        "sp": "CF_SCALE"
+      },
+      "data": [
+        "1X13;1X02;2B>dc;2B>am;B>an;B>rt;2B>pp;B>sp"
+      ]
+    },
+    "curve_cf_mode": {
+      "type": "RIS",
+      "data": [
+        "1X13;1XFF"
+      ]
+    },
     "curve_cv3": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_INITIAL",
-        "vb": "VOLT_MAX",
-        "vc": "VOLT_MIN",
-        "ve": "Scan_Rate",
+        "va": "CV_E_INITIAL",
+        "vb": "CV_E1",
+        "vc": "CV_E2",
+        "ve": "CV_SCAN_RATE",
         "vf": "SAMPLE_RATE",
         "cn": "CYCLE_NUMBER"
       },
@@ -435,10 +563,10 @@
     "curve_cv3_para2": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_INITIAL",
-        "vb": "VOLT_MAX",
-        "vc": "VOLT_MIN",
-        "ve": "Scan_Rate",
+        "va": "CV_E_INITIAL",
+        "vb": "CV_E1",
+        "vc": "CV_E2",
+        "ve": "CV_SCAN_RATE",
         "vf": "SAMPLE_RATE",
         "cn": "CYCLE_NUMBER"
       },
@@ -446,19 +574,18 @@
         "1X09;1X02;4B>ve;2B>vf;2B>cn"
       ]
     },
-    "curve_const_vscan": {
+    "curve_ca": {
       "type": "RIS",
       "parameter": {
-        "va": "VOLT_VSCAN",
-        "pa": "ADC_LEVEL_I_15",
-        "pb": "ADC_LEVEL_V_IN_15",
+        "va": "CA_VOLT",
+        "pa": "GENERAL_LP_RTIA",
         "pd": "CTRL_HIGH_Z_15",
         "pe": "SAMPLE_RATE"
       },
       "data": [
         "1X0B;",
         "2B>va;",
-        "4b>pa;4b>pb;",
+        "4b>pa;4b>0;",
         "4b>0;4b>pd;",
         "2B>pe"
       ]
@@ -467,15 +594,14 @@
       "type": "RIS",
       "parameter": {
         "va": "RT_VOLT_SET",
-        "pa": "ADC_LEVEL_I_15",
-        "pb": "ADC_LEVEL_V_IN_15",
+        "pa": "GENERAL_LP_RTIA",
         "pd": "CTRL_HIGH_Z_15",
         "pe": "SAMPLE_RATE"
       },
       "data": [
         "X04;",
         "2B>va;",
-        "4b>pa;4b>pb;",
+        "4b>pa;4b>0;",
         "4b>0;4b>pd;",
         "2B>pe"
       ]
@@ -483,15 +609,14 @@
     "curve_vt": {
       "type": "RIS",
       "parameter": {
-        "pa": "ADC_LEVEL_I_15",
-        "pb": "ADC_LEVEL_V_IN_15",
+        "pa": "GENERAL_LP_RTIA",
         "pd": "CTRL_HIGH_Z_15",
         "pe": "SAMPLE_RATE",
-        "va": "MEASURE_VIN_RANGE"
+        "va": "VT_MEASURE_VIN_RANGE"
       },
       "data": [
         "X05;",
-        "4b>pa;4b>pb;",
+        "4b>pa;4b>0;",
         "4b>0;4b>pd;",
         "2B>pe;",
         "1B>va"

python/res/devlib/json/Elite_TRIG_0.1.devlib.json

@@ -2,16 +2,27 @@
   "name": "Elite_TRIG_0.1",
   "version": "1.2.30",
   "match_rule": {
-    "local_name_pattern": "Trigger.*",
+    "local_name_pattern": "Elite.*",
     "major_product_number": 0,
     "minor_product_number": 5,
     "major_version_number": 1,
     "minor_version_number": 0
   },
   "constant": {
-
+    "TIME_MAX": 100000
   },
   "parameters": {
+    "TIME_DURATION": {
+      "description": "timer",
+      "record_meta": true,
+      "initial": 0,
+      "domain": [
+        "TIME_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
     "ACC_a_out0": {
       "description": "Switch of analog current channel 1",
       "record_meta": true,
@@ -142,7 +153,8 @@
       "description": "working mode",
       "record_meta": true,
       "value": [
-        "Analog Current Control (ACC)"
+        "Analog Current Control (ACC)",
+        "Idle"
       ]
     },
 

update_db_package.sh

@@ -0,0 +1,38 @@
+#!/bin/bash
+
+# install python module numpy
+sudo apt-get install libatlas-base-dev
+sudo apt-get install python3-numpy
+
+# install python module SQLAlchemy
+pip3 install SQLAlchemy
+
+# create folder to save project logger
+mkdir -p /home/pi/logger/project
+
+# add column cycle in projects
+sudo su -c "psql -d postgres -c \"ALTER TABLE projects ADD COLUMN IF NOT EXISTS cycle JSONB;\"" postgres
+
+# add column project in recording_data_metas
+sudo su -c "psql -d postgres -c \"ALTER TABLE recording_data_metas ADD COLUMN IF NOT EXISTS project Int4;\"" postgres
+
+# remove default controller info
+sudo su -c "psql -d postgres -c \"DELETE FROM controllers WHERE name='WTP_NONE';\"" postgres
+
+# change table name from meta_project_info to project_metas
+sudo su -c "psql -d postgres -c \"ALTER TABLE IF EXISTS meta_project_info RENAME TO project_metas;\"" postgres
+
+# change table name from project_report to project_reports
+sudo su -c "psql -d postgres -c \"ALTER TABLE IF EXISTS project_report RENAME TO project_reports;\"" postgres
+
+# change table project_meta column cycle to type jsonb
+sudo su -c "psql -d postgres -c \"ALTER TABLE project_metas ALTER COLUMN cycle type jsonb USING (cycle::jsonb);\"" postgres
+
+# drop column calibration default
+sudo su -c "psql -d postgres -c \"ALTER TABLE devices ALTER COLUMN calibration DROP DEFAULT;\"" postgres
+
+# drop column calibration default
+sudo su -c "psql -d postgres -c \"ALTER TABLE devices ALTER COLUMN calibration TYPE bytea USING calibration::bytea;\"" postgres
+
+# add column project in recording_data_metas
+sudo su -c "psql -d postgres -c \"ALTER TABLE devices ADD COLUMN IF NOT EXISTS calibration_version Int4 DEFAULT -1;\"" postgres