Compare commits

..

37 Commits

Author SHA1 Message Date
Roy b4d2e96c1b [update] gas1 is true when run done 2020-12-11 17:20:34 +08:00
Roy 4e46602753 [update] gas1 default lastSwitch is true 2020-12-11 16:22:28 +08:00
Roy ba49c70af7 [update] MEGA_VAL_1 always open when elite on 2020-12-11 15:03:44 +08:00
Benny Liu 7a80f99106 Merge remote-tracking branch 'origin/Elite1.5_developement_magafly' into Elite1.5_developement_magafly 2020-12-10 15:51:19 +08:00
Benny Liu 59a3dfedf5 cali_count_max = 5000 for smallest Vin and Iin gain 2020-12-10 15:50:03 +08:00
Roy af1613e43a [update] add t6 & t7 of every func of pulse mode 2020-12-10 14:23:06 +08:00
Roy ef61452bbf [update] every board adjust vout 2020-12-07 18:28:45 +08:00
Roy 6c4c5a6e8e [update] open elite when connect power 2020-12-07 15:34:11 +08:00
Roy 1f656f6be3 [update] every board adjust vout 2020-12-07 13:44:03 +08:00
Roy 3dea49aaa3 [update] vout of stim of pulse mode is 3.281v(megafly = 15v) 2020-12-04 18:33:30 +08:00
Roy 8ad154f4e4 [cali] add BOARD_C724 & BOARD_C874 calibration data. 2020-12-04 18:28:29 +08:00
Benny Liu 19c85c0fb5 Don't care 2020-12-03 18:12:47 +08:00
Roy 6807a787d9 [update] vout of stim of pulse mode is 3.281v(megafly = 15v) & record trigger 2020-12-03 15:40:14 +08:00
Roy 557953aedc [update] only stim of pulse mode send data & reset when no func of pulse mode 2020-12-03 11:16:09 +08:00
Roy d17a54d7f8 [update] update pulsemode's gas2 & ledR & ledG 2020-12-03 09:47:06 +08:00
Roy 31a7e9b5f2 [update] set sti_v5 = 0V 2020-12-02 11:49:08 +08:00
Roy ec69da3b6d [update] open highz when reset 2020-12-02 11:33:13 +08:00
Roy b9aff38268 [update] controller send gas0's instruction 2020-12-02 09:21:45 +08:00
Roy 627ca7dde0 [update] comment out 2020-11-30 11:20:08 +08:00
Roy ae143d2d7b [update] if E.stim volt = 0V, open highz 2020-11-27 18:49:15 +08:00
Roy 900c9c4706 [update] update pulsemode's gas1 2020-11-27 18:22:18 +08:00
Roy b712c99487 [update] update pulsemode's gas0 2020-11-27 17:59:13 +08:00
Roy 9664e9ab6d [update] update pulsemode's ledR 2020-11-27 17:28:05 +08:00
Roy f43341fc0c [update] update pulsemode's ledG 2020-11-27 17:17:08 +08:00
Roy aa572db220 [update] update pulsemode's ledG 2020-11-27 11:38:09 +08:00
Roy 47c10d5e73 Merge branch 'Elite1.5_developement_magafly_1119_2' into Elite1.5_developement_magafly_1119_1
# Conflicts:
#	simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage/headstage.h
2020-11-27 10:58:57 +08:00
Roy b743a552ee [update] align notify and update pulsemode's ledG 2020-11-26 22:42:20 +08:00
Roy e2bb110d15 [update] Change 1.5 Iin measurement range. 2020-11-26 18:27:34 +08:00
Benny Liu 2723304b4c ADC_test for output control. 2020-11-26 17:45:14 +08:00
Roy d1c324acde [update] add Vout boundary (usc) 2020-11-26 16:20:15 +08:00
Roy afa28c9781 [update] run pulsemode's ledG 2020-11-26 10:08:23 +08:00
Roy 9cc51a14c6 [update] run pulsemode's ledG 2020-11-25 13:55:11 +08:00
Roy d305b8a948 not ok 2020-11-25 09:41:31 +08:00
Roy 1b0acb5bad [update] run pulsemode when receive trigger.[ok] 2020-11-24 18:04:30 +08:00
Roy 1d4330b903 [update] run pulsemode when receive trigger.[ok] 2020-11-24 17:37:16 +08:00
Roy ec1782b6f8 [update] run pulsemode when receive trigger. 2020-11-23 17:31:14 +08:00
Roy f2b52f34a9 [cali] update BOARD_C7A1 calibration data. 2020-11-23 13:54:40 +08:00
40 changed files with 3921 additions and 2656 deletions
@@ -34,17 +34,17 @@
<listOptionValue builtIn="false" value="LINK_ORDER=TOOLS/ccs_linker_defines.cmd;TOOLS/cc26xx_app.cmd;"/>
<listOptionValue builtIn="false" value="RTSC_MBS_VERSION=2.2.0"/>
</option>
<option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.277675815" name="Compiler version" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="18.1.4.LTS" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION.277675815" superClass="com.ti.ccstudio.buildDefinitions.core.OPT_CODEGEN_VERSION" value="18.1.4.LTS" valueType="string"/>
<targetPlatform id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.targetPlatformDebug.1593934674" name="Platform" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.targetPlatformDebug"/>
<builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.builderDebug.632414212" keepEnvironmentInBuildfile="false" name="GNU Make" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.builderDebug"/>
<builder buildPath="${BuildDirectory}" id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.builderDebug.632414212" name="GNU Make.FlashROM" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.builderDebug"/>
<tool id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.compilerDebug.154623462" name="ARM Compiler" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.compilerDebug">
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION.974280107" name="Target processor version (--silicon_version, -mv)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION.7M3" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE.1783826131" name="Designate code state, 16-bit (thumb) or 32-bit (--code_state)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE.16" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI.1536570599" name="Application binary interface. (--abi)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI.eabi" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.LITTLE_ENDIAN.1895413316" name="Little endian code [See 'General' page to edit] (--little_endian, -me)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL.322983319" name="Optimization level (--opt_level, -O)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL.4" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED.1305400753" name="Speed vs. size trade-offs (--opt_for_speed, -mf)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED.0" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.INCLUDE_PATH.1468985930" name="Add dir to #include search path (--include_path, -I)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.INCLUDE_PATH" valueType="includePath">
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION.974280107" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.SILICON_VERSION.7M3" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE.1783826131" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CODE_STATE.16" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI.1536570599" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.ABI.eabi" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.LITTLE_ENDIAN.1895413316" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.LITTLE_ENDIAN" value="true" valueType="boolean"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL.322983319" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_LEVEL.4" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED.1305400753" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.OPT_FOR_SPEED.0" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.INCLUDE_PATH.1468985930" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.INCLUDE_PATH" valueType="includePath">
<listOptionValue builtIn="false" value="${CG_TOOL_ROOT}/include"/>
<listOptionValue builtIn="false" value="C:\ti\simplelink\ble_sdk_2_02_02_25\src\examples\simple_peripheral\cc26xx\app\headstage"/>
<listOptionValue builtIn="false" value="${SRC_EX}/examples/simple_peripheral/cc26xx/app"/>
@@ -70,7 +70,7 @@
<listOptionValue builtIn="false" value="${SRC_BLE_CORE}/rom"/>
<listOptionValue builtIn="false" value="${CC26XXWARE}"/>
</option>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEFINE.1897088" name="Pre-define NAME (--define, -D)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEFINE" valueType="definedSymbols">
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEFINE.1897088" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEFINE" valueType="definedSymbols">
<listOptionValue builtIn="false" value="BOARD_DISPLAY_EXCLUDE_UART"/>
<listOptionValue builtIn="false" value="POWER_SAVING"/>
<listOptionValue builtIn="false" value="BOOSTXL_CC2650MA"/>
@@ -86,19 +86,19 @@
<listOptionValue builtIn="false" value="xdc_runtime_Assert_DISABLE_ALL"/>
<listOptionValue builtIn="false" value="xdc_runtime_Log_DISABLE_ALL"/>
</option>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEBUGGING_MODEL.871011287" name="Debugging model" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT.863089168" name="C Dialect" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT.C99" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.GCC.1454248503" name="Enable support for GCC extensions (DEPRECATED) (--gcc)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.GCC" value="true" valueType="boolean"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_SUPPRESS.1965115059" name="Suppress diagnostic &lt;id&gt; (--diag_suppress, -pds)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_SUPPRESS" valueType="stringList">
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEBUGGING_MODEL.871011287" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEBUGGING_MODEL" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DEBUGGING_MODEL.SYMDEBUG__DWARF" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT.863089168" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.C_DIALECT.C99" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.GCC.1454248503" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.GCC" value="true" valueType="boolean"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_SUPPRESS.1965115059" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_SUPPRESS" valueType="stringList">
<listOptionValue builtIn="false" value="48"/>
</option>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WARNING.1638011093" name="Treat diagnostic &lt;id&gt; as warning (--diag_warning, -pdsw)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WARNING" valueType="stringList">
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WARNING.1638011093" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WARNING" valueType="stringList">
<listOptionValue builtIn="false" value="225"/>
</option>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP.1920170652" name="Wrap diagnostic messages (--diag_wrap)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DISPLAY_ERROR_NUMBER.2038786257" name="Emit diagnostic identifier numbers (--display_error_number, -pden)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.GEN_FUNC_SUBSECTIONS.811478344" name="Place each function in a separate subsection (--gen_func_subsections, -ms)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CMD_FILE.1229809338" name="Read options from specified file (--cmd_file, -@)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CMD_FILE" valueType="stringList">
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP.1920170652" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DIAG_WRAP.off" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DISPLAY_ERROR_NUMBER.2038786257" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.GEN_FUNC_SUBSECTIONS.811478344" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.GEN_FUNC_SUBSECTIONS" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.GEN_FUNC_SUBSECTIONS.on" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CMD_FILE.1229809338" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compilerID.CMD_FILE" valueType="stringList">
<listOptionValue builtIn="false" value="${SRC_EX}/config/build_components.opt"/>
<listOptionValue builtIn="false" value="${ORG_PROJ_DIR}/build_config.opt"/>
<listOptionValue builtIn="false" value="${ORG_PROJ_DIR}/../../ccs/config/ccs_compiler_defines.bcfg"/>
@@ -109,48 +109,48 @@
<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__ASM2_SRCS.463094612" name="Assembly Sources" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.compiler.inputType__ASM2_SRCS"/>
</tool>
<tool id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.linkerDebug.1351821865" name="ARM Linker" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exe.linkerDebug">
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.STACK_SIZE.174129193" name="Set C system stack size (--stack_size, -stack)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.STACK_SIZE" value="256" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.HEAP_SIZE.567300083" name="Heap size for C/C++ dynamic memory allocation (--heap_size, -heap)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.HEAP_SIZE" value="0" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.MAP_FILE.1800982811" name="Link information (map) listed into &lt;file&gt; (--map_file, -m)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.MAP_FILE" value="&quot;${ProjName}.map&quot;" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.OUTPUT_FILE.1091211742" name="Specify output file name (--output_file, -o)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.OUTPUT_FILE" value="${ProjName}.out" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.LIBRARY.1479599481" name="Include library file or command file as input (--library, -l)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.LIBRARY" valueType="libs">
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.STACK_SIZE.174129193" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.STACK_SIZE" value="256" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.HEAP_SIZE.567300083" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.HEAP_SIZE" value="0" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.MAP_FILE.1800982811" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.MAP_FILE" value="&quot;${ProjName}.map&quot;" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.OUTPUT_FILE.1091211742" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.OUTPUT_FILE" value="${ProjName}.out" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.LIBRARY.1479599481" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.LIBRARY" valueType="libs">
<listOptionValue builtIn="false" value="libc.a"/>
<listOptionValue builtIn="false" value="${CC26XXWARE}/driverlib/bin/ccs/driverlib.lib"/>
<listOptionValue builtIn="false" value="${ROM}/common_rom_releases/03282014/common_rom.symbols"/>
</option>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.SEARCH_PATH.672837228" name="Add &lt;dir&gt; to library search path (--search_path, -i)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.SEARCH_PATH" valueType="libPaths">
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.SEARCH_PATH.672837228" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.SEARCH_PATH" valueType="libPaths">
<listOptionValue builtIn="false" value="${CG_TOOL_ROOT}/lib"/>
<listOptionValue builtIn="false" value="${CG_TOOL_ROOT}/include"/>
</option>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_SUPPRESS.544523272" name="Suppress diagnostic &lt;id&gt; (--diag_suppress)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_SUPPRESS" valueType="stringList">
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_SUPPRESS.544523272" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_SUPPRESS" valueType="stringList">
<listOptionValue builtIn="false" value="10247-D"/>
<listOptionValue builtIn="false" value="16002-D"/>
</option>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP.1281207998" name="Wrap diagnostic messages (--diag_wrap)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DISPLAY_ERROR_NUMBER.468817864" name="Emit diagnostic identifier numbers (--display_error_number)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.XML_LINK_INFO.1679096029" name="Detailed link information data-base into &lt;file&gt; (--xml_link_info, -xml_link_info)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.XML_LINK_INFO" value="&quot;${ProjName}_linkInfo.xml&quot;" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF.254835397" name="Aggressively reduce size of the DWARF information (--compress_dwarf)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF.on" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION.1848192295" name="Eliminate sections not needed in the executable (--unused_section_elimination)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION.on" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP.1281207998" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DIAG_WRAP.off" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DISPLAY_ERROR_NUMBER.468817864" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.DISPLAY_ERROR_NUMBER" value="true" valueType="boolean"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.XML_LINK_INFO.1679096029" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.XML_LINK_INFO" value="&quot;${ProjName}_linkInfo.xml&quot;" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF.254835397" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.COMPRESS_DWARF.on" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION.1848192295" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.linkerID.UNUSED_SECTION_ELIMINATION.on" valueType="enumerated"/>
<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD_SRCS.1999849945" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD_SRCS"/>
<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD2_SRCS.25027104" name="Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__CMD2_SRCS"/>
<inputType id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__GEN_CMDS.888093741" name="Generated Linker Command Files" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.exeLinker.inputType__GEN_CMDS"/>
</tool>
<tool id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.19288898" name="ARM Hex Utility" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex">
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.ROMWIDTH.11734737" name="Specify rom width (--romwidth, -romwidth=width)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.ROMWIDTH" value="8" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.MEMWIDTH.466140455" name="Specify memory width (--memwidth, -memwidth=width)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.MEMWIDTH" value="8" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT.824070691" name="Output format" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT.INTEL" valueType="enumerated"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.ROMWIDTH.11734737" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.ROMWIDTH" value="8" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.MEMWIDTH.466140455" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.MEMWIDTH" value="8" valueType="string"/>
<option id="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT.824070691" superClass="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT" value="com.ti.ccstudio.buildDefinitions.TMS470_18.1.hex.OUTPUT_FORMAT.INTEL" valueType="enumerated"/>
</tool>
<tool id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.1392704063" name="XDCtools" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool">
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.XDC_PATH.225737408" name="Package repositories (--xdcpath)" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.XDC_PATH" valueType="stringList">
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.XDC_PATH.225737408" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.XDC_PATH" valueType="stringList">
<listOptionValue builtIn="false" value="${COM_TI_RTSC_TIRTOSCC13XX_CC26XX_REPOS}"/>
<listOptionValue builtIn="false" value="${TARGET_CONTENT_BASE}"/>
</option>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.TARGET.571281110" name="Target (-t)" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.TARGET" value="ti.targets.arm.elf.M3" valueType="string"/>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.PLATFORM.205178830" name="Platform (-p)" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.PLATFORM" value="ti.platforms.simplelink:CC2640F128" valueType="string"/>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.PLATFORM_RAW.1097777495" name="Platform (-p)" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.PLATFORM_RAW" value="ti.platforms.simplelink:CC2640F128" valueType="string"/>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.BUILD_PROFILE.744121344" name="Build-profile (-r)" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.BUILD_PROFILE" value="release" valueType="string"/>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.CODEGEN_TOOL_DIR.165807018" name="Compiler tools directory (-c)" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.CODEGEN_TOOL_DIR" value="${CG_TOOL_ROOT}" valueType="string"/>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.COMPILE_OPTIONS.391961861" name="Additional compiler options (--compileOptions)" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.COMPILE_OPTIONS" value="&quot;${COMPILER_FLAGS}&quot;" valueType="string"/>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.TARGET.571281110" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.TARGET" value="ti.targets.arm.elf.M3" valueType="string"/>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.PLATFORM.205178830" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.PLATFORM" value="ti.platforms.simplelink:CC2640F128" valueType="string"/>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.PLATFORM_RAW.1097777495" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.PLATFORM_RAW" value="ti.platforms.simplelink:CC2640F128" valueType="string"/>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.BUILD_PROFILE.744121344" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.BUILD_PROFILE" value="release" valueType="string"/>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.CODEGEN_TOOL_DIR.165807018" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.CODEGEN_TOOL_DIR" value="${CG_TOOL_ROOT}" valueType="string"/>
<option id="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.COMPILE_OPTIONS.391961861" superClass="com.ti.rtsc.buildDefinitions.XDC_3.16.tool.COMPILE_OPTIONS" value="&quot;${COMPILER_FLAGS}&quot;" valueType="string"/>
</tool>
</toolChain>
</folderInfo>
@@ -16,7 +16,7 @@
# sources were generated) is:
# C:\ti\simplelink\ble_sdk_2_02_02_25\examples\cc2650em\simple_peripheral\ccs\config\src
#
GEN_SRC_DIR ?= ../../config/src
GEN_SRC_DIR ?= ../../../../../ti/simplelink/ble_sdk_2_02_02_25/examples/cc2650em/simple_peripheral/ccs/config/src
ifeq (,$(wildcard $(GEN_SRC_DIR)))
$(error "ERROR: GEN_SRC_DIR must be set to the directory containing the generated sources")
@@ -1,12 +1,12 @@
XOPTS = -I"C:/ti/xdctools_3_32_02_25_core/packages/" -Dxdc_target_types__=C:/ti/tirtos_cc13xx_cc26xx_2_21_01_08/products/bios_6_46_01_38/packages/ti/targets/arm/elf/std.h -Dxdc_target_name__=M3
XOPTS = -I"C:/ti/xdctools_3_32_00_06_core/packages/" -Dxdc_target_types__=C:/ti/tirtos_cc13xx_cc26xx_2_21_01_08/products/bios_6_46_01_38/packages/ti/targets/arm/elf/std.h -Dxdc_target_name__=M3
vpath % C:/ti/tirtos_cc13xx_cc26xx_2_21_01_08/products/bios_6_46_01_38/packages/ti/sysbios/
vpath %.c C:/ti/xdctools_3_32_02_25_core/packages/
vpath %.c C:/ti/xdctools_3_32_00_06_core/packages/
CCOPTS = --endian=little -mv7M3 --abi=eabi -q -ms --opt_for_speed=0 --program_level_compile -o3 -g --optimize_with_debug -Dti_sysbios_knl_Task_minimizeLatency__D=FALSE -Dti_sysbios_family_arm_cc26xx_Boot_driverlibVersion=2 -Dti_sysbios_knl_Clock_stopCheckNext__D=TRUE -Dti_sysbios_family_arm_m3_Hwi_enableException__D=TRUE -Dti_sysbios_family_arm_m3_Hwi_disablePriority__D=32U -Dti_sysbios_family_arm_m3_Hwi_numSparseInterrupts__D=0U
XDC_ROOT = C:/ti/xdctools_3_32_02_25_core/packages/
XDC_ROOT = C:/ti/xdctools_3_32_00_06_core/packages/
BIOS_ROOT = C:/ti/tirtos_cc13xx_cc26xx_2_21_01_08/products/bios_6_46_01_38/packages/ti/sysbios/
@@ -16,14 +16,14 @@ BIOS_INC = -I"C:/ti/tirtos_cc13xx_cc26xx_2_21_01_08/products/bios_6_46_01_38/pa
TARGET_INC = -I"C:/ti/tirtos_cc13xx_cc26xx_2_21_01_08/products/bios_6_46_01_38/packages/"
INCS = $(BIOS_INC) $(TARGET_INC) --include_path="C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.3.LTS/include" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/icall/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/profiles/roles/cc26xx" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/profiles/roles" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/profiles/dev_info" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/profiles/simple_profile/cc26xx" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/profiles/simple_profile" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/common/cc26xx" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/heapmgr" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/controller/cc26xx/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/hal/src/target/_common" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/target" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/hal/src/target/_common/cc26xx" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/hal/src/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/osal/src/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/services/src/sdata" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/services/src/saddr" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/icall/src/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/rom" --include_path="C:/ti/tirtos_cc13xx_cc26xx_2_21_01_08/products/cc26xxware_2_24_03_17272" -IC:/ti/tirtos_cc13xx_cc26xx_2_21_01_08/products/bios_6_46_01_38/packages/
INCS = $(BIOS_INC) $(TARGET_INC) --include_path="C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.4.LTS/include" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app/headstage" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/examples/simple_peripheral/cc26xx/app" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/icall/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/profiles/roles/cc26xx" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/profiles/roles" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/profiles/dev_info" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/profiles/simple_profile/cc26xx" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/profiles/simple_profile" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/common/cc26xx" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/heapmgr" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/controller/cc26xx/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/hal/src/target/_common" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/target" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/hal/src/target/_common/cc26xx" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/hal/src/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/osal/src/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/services/src/sdata" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/services/src/saddr" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/components/icall/src/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/inc" --include_path="C:/ti/simplelink/ble_sdk_2_02_02_25/src/rom" --include_path="C:/ti/tirtos_cc13xx_cc26xx_2_21_01_08/products/cc26xxware_2_24_03_17272" -IC:/ti/tirtos_cc13xx_cc26xx_2_21_01_08/products/bios_6_46_01_38/packages/
CC = C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.3.LTS/bin/armcl -c $(CCOPTS) -I C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.3.LTS/include
ASM = C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.3.LTS/bin/armcl -c $(CCOPTS) -I C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.3.LTS/include
AR = C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.3.LTS/bin/armar rq
CC = C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.4.LTS/bin/armcl -c $(CCOPTS) -I C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.4.LTS/include
ASM = C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.4.LTS/bin/armcl -c $(CCOPTS) -I C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.4.LTS/include
AR = C:/ti/ccsv8/tools/compiler/ti-cgt-arm_18.1.4.LTS/bin/armar rq
DEL = C:/ti/xdctools_3_32_02_25_core/packages/../bin/rm -f
CP = C:/ti/xdctools_3_32_02_25_core/packages/../bin/cp -f
DEL = C:/ti/xdctools_3_32_00_06_core/packages/../bin/rm -f
CP = C:/ti/xdctools_3_32_00_06_core/packages/../bin/cp -f
define RM
$(if $(wildcard $1),$(DEL) $1,:)
@@ -177,7 +177,7 @@ static void PIN15_setOutputValue (uint32_t latch_num, uint32_t pin_num, bool hig
}
}
PIN_setOutputValue(&ZM_rst, latch_num, 1); // Turn on latch
// CPUdelay(10);
CPUdelay(10);
PIN_setOutputValue(&ZM_rst, latch_num, 0); // Turn off latch
remove_elite_pin();
ELITE15_SPI_HOLD();
@@ -199,7 +199,7 @@ static void ADCChannelSelect(uint8_t ADCChannel){
static void ReadADCIin(uint8_t *buf){
// Read data twice since the first data we get is previous data
// IinADCGainControl(instru.ADCGainLevel);
// IinADCGainControl(INSTRUCTION.ADCGainLevel);
ADCChannelSelect(ADC_CH_CURRENT);
ADC_read(buf);
@@ -210,7 +210,7 @@ static void ReadADCIin(uint8_t *buf){
static void ReadADCVin(uint8_t *buf){
// Read data twice since the first data we get is previous data
// VinADCGainControl(instru.VinADCGainLevel);
// VinADCGainControl(INSTRUCTION.VinADCGainLevel);
ADCChannelSelect(ADC_CH_VOLT);
ADC_read(buf);
@@ -263,7 +263,7 @@ static int32_t AutoGainReadIin(uint8_t *buf){
int32_t RealCurrent = 0;
ReadADCIin(spi_ADC_rxbuf);
RealCurrent = DecodeADCValue(instru.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
RealCurrent = DecodeADCValue(INSTRUCTION.ADCGainLevel, ADC_CH_CURRENT, spi_ADC_rxbuf);
return RealCurrent;
}
@@ -272,7 +272,7 @@ static int32_t AutoGainReadVin(uint8_t *buf){
int32_t RealVolt = 0;
ReadADCVin(spi_ADC_rxbuf);
RealVolt = DecodeADCValue(instru.VinADCGainLevel, ADC_CH_VOLT, spi_ADC_rxbuf);
RealVolt = DecodeADCValue(INSTRUCTION.VinADCGainLevel, ADC_CH_VOLT, spi_ADC_rxbuf);
return RealVolt;
}
@@ -282,14 +282,14 @@ static void AutoGainChangeIin(int32_t RealCurrent){
// switch to 2 level current 100K
// switch to 3 level current 3K
// switch to 4 level current(large) 100R
if(instru.ADCGainLevel == I_GAIN_100R){
if(INSTRUCTION.ADCGainLevel == I_GAIN_100R){
if(RealCurrent < I_GAIN_LARGE_BOUNDARY && RealCurrent > -1*I_GAIN_LARGE_BOUNDARY){
// switch to 1 level current(small)
if (RealCurrent < I_GAIN_MID1_BOUNDARY1 && RealCurrent > -1*I_GAIN_MID1_BOUNDARY1){
I_GAIN_3M_counter++;
if(I_GAIN_3M_counter > 2){
instru.ADCGainLevel = I_GAIN_3M;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_3M;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_3M_counter = 0;
record_flag = false;
}
@@ -298,8 +298,8 @@ static void AutoGainChangeIin(int32_t RealCurrent){
else if (RealCurrent < I_GAIN_MID2_BOUNDARY1 && RealCurrent > -1*I_GAIN_MID2_BOUNDARY1){
I_GAIN_100K_counter++;
if(I_GAIN_100K_counter > 2){
instru.ADCGainLevel = I_GAIN_100K;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_100K;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_100K_counter = 0;
record_flag = false;
}
@@ -308,8 +308,8 @@ static void AutoGainChangeIin(int32_t RealCurrent){
else{
I_GAIN_3K_counter++;
if(I_GAIN_3K_counter > 2){
instru.ADCGainLevel = I_GAIN_3K;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_3K;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_3K_counter = 0;
record_flag = false;
}
@@ -326,13 +326,13 @@ static void AutoGainChangeIin(int32_t RealCurrent){
}
}
}
else if(instru.ADCGainLevel == I_GAIN_3K){
else if(INSTRUCTION.ADCGainLevel == I_GAIN_3K){
// switch to 4 level current(large)
if(RealCurrent > I_GAIN_MID2_BOUNDARY2 || RealCurrent < -1*I_GAIN_MID2_BOUNDARY2){
I_GAIN_100R_counter++;
if(I_GAIN_100R_counter > 2){
instru.ADCGainLevel = I_GAIN_100R;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_100R;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_100R_counter = 0;
record_flag = false;
}
@@ -342,8 +342,8 @@ static void AutoGainChangeIin(int32_t RealCurrent){
if(RealCurrent < I_GAIN_MID1_BOUNDARY1 && RealCurrent > -1*I_GAIN_MID1_BOUNDARY1){
I_GAIN_3M_counter++;
if(I_GAIN_3M_counter > 2){
instru.ADCGainLevel = I_GAIN_3M;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_3M;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_3M_counter = 0;
record_flag = false;
}
@@ -352,8 +352,8 @@ static void AutoGainChangeIin(int32_t RealCurrent){
else{
I_GAIN_100K_counter++;
if(I_GAIN_100K_counter > 2){
instru.ADCGainLevel = I_GAIN_100K;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_100K;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_100K_counter = 0;
record_flag = false;
}
@@ -370,13 +370,13 @@ static void AutoGainChangeIin(int32_t RealCurrent){
}
}
}
else if(instru.ADCGainLevel == I_GAIN_100K){
else if(INSTRUCTION.ADCGainLevel == I_GAIN_100K){
// switch to 1 level current(small)
if(RealCurrent < I_GAIN_MID1_BOUNDARY1 && RealCurrent > -1*I_GAIN_MID1_BOUNDARY1){
I_GAIN_3M_counter++;
if(I_GAIN_3M_counter > 2){
instru.ADCGainLevel = I_GAIN_3M;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_3M;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_3M_counter = 0;
record_flag = false;
}
@@ -386,8 +386,8 @@ static void AutoGainChangeIin(int32_t RealCurrent){
if(RealCurrent > I_GAIN_MID2_BOUNDARY2 || RealCurrent < -1*I_GAIN_MID2_BOUNDARY2){
I_GAIN_100R_counter++;
if(I_GAIN_100R_counter > 2){
instru.ADCGainLevel = I_GAIN_100R;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_100R;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_100R_counter = 0;
record_flag = false;
}
@@ -396,8 +396,8 @@ static void AutoGainChangeIin(int32_t RealCurrent){
else{
I_GAIN_3K_counter++;
if(I_GAIN_3K_counter > 2){
instru.ADCGainLevel = I_GAIN_3K;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_3K;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_3K_counter = 0;
record_flag = false;
}
@@ -414,14 +414,14 @@ static void AutoGainChangeIin(int32_t RealCurrent){
}
}
}
else if(instru.ADCGainLevel == I_GAIN_3M){
else if(INSTRUCTION.ADCGainLevel == I_GAIN_3M){
if(RealCurrent > I_GAIN_SMALL_BOUNDARY || RealCurrent < -1*I_GAIN_SMALL_BOUNDARY){
// switch to 4 level current(large)
if(RealCurrent > I_GAIN_MID2_BOUNDARY2 || RealCurrent < -1*I_GAIN_MID2_BOUNDARY2){
I_GAIN_100R_counter++;
if(I_GAIN_100R_counter > 2){
instru.ADCGainLevel = I_GAIN_100R;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_100R;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_100R_counter = 0;
record_flag = false;
}
@@ -430,8 +430,8 @@ static void AutoGainChangeIin(int32_t RealCurrent){
else if(RealCurrent > I_GAIN_MID1_BOUNDARY2 || RealCurrent < -1*I_GAIN_MID1_BOUNDARY2){
I_GAIN_3K_counter++;
if(I_GAIN_3K_counter > 2){
instru.ADCGainLevel = I_GAIN_3K;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_3K;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_3K_counter = 0;
record_flag = false;
}
@@ -440,8 +440,8 @@ static void AutoGainChangeIin(int32_t RealCurrent){
else{
I_GAIN_100K_counter++;
if(I_GAIN_100K_counter > 2){
instru.ADCGainLevel = I_GAIN_100K;
IinADCGainControl(instru.ADCGainLevel);
INSTRUCTION.ADCGainLevel = I_GAIN_100K;
IinADCGainControl(INSTRUCTION.ADCGainLevel);
I_GAIN_100K_counter = 0;
record_flag = false;
}
@@ -465,14 +465,14 @@ static void AutoGainChangeVin(int32_t RealVin){
// switch to 1 level volt(small) 1M
// switch to 2 level volt 30K
// switch to 3 level volt(large) 1K
if(instru.VinADCGainLevel == VIN_GAIN_1M){
if(INSTRUCTION.VinADCGainLevel == VIN_GAIN_1M){
if(RealVin > VIN_GAIN_SMALL_BOUNDARY || RealVin < -1*VIN_GAIN_SMALL_BOUNDARY){
// switch to 3 level volt(large)
if (RealVin > VIN_GAIN_MID1_BOUNDARY2 || RealVin < -1*VIN_GAIN_MID1_BOUNDARY2){
VIN_GAIN_1K_counter++;
if(VIN_GAIN_1K_counter > 2){
instru.VinADCGainLevel = VIN_GAIN_1K;
VinADCGainControl(instru.VinADCGainLevel);
INSTRUCTION.VinADCGainLevel = VIN_GAIN_1K;
VinADCGainControl(INSTRUCTION.VinADCGainLevel);
VIN_GAIN_1K_counter = 0;
record_flag = false;
}
@@ -481,8 +481,8 @@ static void AutoGainChangeVin(int32_t RealVin){
else{
VIN_GAIN_30K_counter++;
if(VIN_GAIN_30K_counter > 2){
instru.VinADCGainLevel = VIN_GAIN_30K;
VinADCGainControl(instru.VinADCGainLevel);
INSTRUCTION.VinADCGainLevel = VIN_GAIN_30K;
VinADCGainControl(INSTRUCTION.VinADCGainLevel);
VIN_GAIN_30K_counter = 0;
record_flag = false;
}
@@ -496,13 +496,13 @@ static void AutoGainChangeVin(int32_t RealVin){
}
}
}
else if(instru.VinADCGainLevel == VIN_GAIN_30K){
else if(INSTRUCTION.VinADCGainLevel == VIN_GAIN_30K){
// switch to 1 level volt(small)
if(RealVin < VIN_GAIN_MID1_BOUNDARY1 && RealVin > -1*VIN_GAIN_MID1_BOUNDARY1){
VIN_GAIN_1M_counter++;
if(VIN_GAIN_1M_counter > 2){
instru.VinADCGainLevel = VIN_GAIN_1M;
VinADCGainControl(instru.VinADCGainLevel);
INSTRUCTION.VinADCGainLevel = VIN_GAIN_1M;
VinADCGainControl(INSTRUCTION.VinADCGainLevel);
VIN_GAIN_1M_counter = 0;
record_flag = false;
}
@@ -511,8 +511,8 @@ static void AutoGainChangeVin(int32_t RealVin){
// switch to 3 level volt
VIN_GAIN_1K_counter++;
if(VIN_GAIN_1K_counter > 2){
instru.VinADCGainLevel = VIN_GAIN_1K;
VinADCGainControl(instru.VinADCGainLevel);
INSTRUCTION.VinADCGainLevel = VIN_GAIN_1K;
VinADCGainControl(INSTRUCTION.VinADCGainLevel);
VIN_GAIN_1K_counter = 0;
record_flag = false;
}
@@ -525,14 +525,14 @@ static void AutoGainChangeVin(int32_t RealVin){
}
}
}
else if(instru.VinADCGainLevel == VIN_GAIN_1K){
else if(INSTRUCTION.VinADCGainLevel == VIN_GAIN_1K){
if(RealVin < VIN_GAIN_LARGE_BOUNDARY && RealVin > -1*VIN_GAIN_LARGE_BOUNDARY){
// switch to 1 level volt(small)
if (RealVin < VIN_GAIN_MID1_BOUNDARY1 && RealVin > -1*VIN_GAIN_MID1_BOUNDARY1){
VIN_GAIN_1M_counter++;
if(VIN_GAIN_1M_counter > 2){
instru.VinADCGainLevel = VIN_GAIN_1M;
VinADCGainControl(instru.VinADCGainLevel);
INSTRUCTION.VinADCGainLevel = VIN_GAIN_1M;
VinADCGainControl(INSTRUCTION.VinADCGainLevel);
VIN_GAIN_1M_counter = 0;
record_flag = false;
}
@@ -541,8 +541,8 @@ static void AutoGainChangeVin(int32_t RealVin){
else{
VIN_GAIN_30K_counter++;
if(VIN_GAIN_30K_counter > 2){
instru.VinADCGainLevel = VIN_GAIN_30K;
VinADCGainControl(instru.VinADCGainLevel);
INSTRUCTION.VinADCGainLevel = VIN_GAIN_30K;
VinADCGainControl(INSTRUCTION.VinADCGainLevel);
VIN_GAIN_30K_counter = 0;
record_flag = false;
}
@@ -0,0 +1,32 @@
#ifndef ELITECCC
#define ELITECCC
#include "EliteCCMode.h"
// XXX : should we reset DAC output after STOP?
static void CCModeReverseCurrent(CCCMode *CCC){
if(CCC->StandBy){
if(CT.StandByCounter == CCC->StandByTime){
CCC->StandBy = false;
CT.StandByCounter = 0;
}
else{
CT.StandByCounter ++;
}
}
else{
// reverse charge/discharge
if(CCC->BatteryV == CCC->VMax){
CCC->StandBy = true;
CCC->value = CCC->DischargeCurrent;
}
else if(CCC->BatteryV == CCC->VMin){
CCC->StandBy = true;
CCC->value = CCC->ChargeCurrent;
}
}
}
#endif
@@ -2,8 +2,8 @@
#ifndef ELITECCMODE
#define ELITECCMODE
#define Vset instru.Vset
#define DELTAVOLTMAX 2000000 //2000000 = 10mV
#define Vset INSTRUCTION.Vset
#define DELTAVOLTMAX 100000
/* Transform setting CC into IUC
*
@@ -11,67 +11,73 @@
* Real current value : -15.00000 ~ 15.00000 mA
* => user code = 1500000 mapping to 0.00000 mA
*/
static void cc_vscan(void)
{
struct wm_cc_ctx_t *cc = (struct wm_cc_ctx_t *)wm_get();
struct wm_meas_t *m = &cc->measure;
static void CC_Vscan(CCMode *CC){
static int32_t Iin = 0;
static int32_t deltaI = 0;
static int32_t deltaV = 0;
uint16_t divisionRate;
int32_t deltaI;
int32_t deltaV;
int32_t Iin;
int32_t Vin;
if (vscanReset) {
if(vscanReset){
Vset = 0;
if (cc->_charge == 0) {
cc->_Iset = instru.constantCurrent * 200 * (-1);
//[50pA] //controller UI 15000uA => Elite 1500000 => 1500000 * 10 * 1000 / 50 [50pA];
if(CC->_charge == 0){
CC->_Iset *= -1;
}
Iin = m->_measureCurrent * 20; //[50pA] nA => 50pA
Vin = m->_measureVin * 200; //[5nV]
Iin = CC->_measureCurrent * 20; //[50pA] nA => 50pA
deltaI = Iin - CC->_Iset;
Vset = Vin + cc->_Iset / 20 ; //[5nV]
if (Vset >= 1100000000) { // 5.5V
Vset = 1100000000;
} else if (Vset <= -1000000000) { //-5V
Vset = -1000000000;
}
}
if (!vscanReset) {
Iin = m->_measureCurrent * 20; //[50pA] nA => 50pA
deltaI = Iin - cc->_Iset;
if (deltaI > 2000000 || deltaI < -2000000) { //100uA
divisionRate = 1;
} else {
divisionRate = 20;
if(deltaI > 20000000 || deltaI < -20000000){ //1mA
divisionRate = 1000;
}else{
divisionRate = 10;
}
deltaV = -1 * (deltaI / divisionRate); //-5 * deltaI / 5000 //pV=> 5nV
if (deltaV > DELTAVOLTMAX) { //2000000 = 10mV
if(deltaV > DELTAVOLTMAX){ //100000 = 500uV
deltaV = DELTAVOLTMAX;
} else if (deltaV < (-DELTAVOLTMAX)) {
}else if(deltaV < (-DELTAVOLTMAX)){
deltaV = (-DELTAVOLTMAX);
}
Vset = Vset + deltaV; //[5nV]
if (Vset >= 1100000000) { // 5.5V
Vset = 1100000000;
} else if (Vset <= -1000000000) { //-5V
Vset = -1000000000;
}
if (Vset <= cc->_Vmin) {
Vset = cc->_Vmin;
} else if (Vset >= cc->_Vmax) {
Vset = cc->_Vmax;
if(Vset <= CC->_Vmin){
Vset = CC->_Vmin;
}else if(Vset >= CC->_Vmax){
Vset = CC->_Vmax;
}
}
if(!vscanReset){
Iin = CC->_measureCurrent * 20; //[50pA] nA => 50pA
deltaI = Iin - CC->_Iset;
if(deltaI > 20000000 || deltaI < -20000000){ //1mA
divisionRate = 1000;
}else{
divisionRate = 10;
}
deltaV = -1 * (deltaI / divisionRate); //-5 * deltaI / 5000 //pV=> 5nV
if(deltaV > DELTAVOLTMAX){ //100000 = 500uV
deltaV = DELTAVOLTMAX;
}else if(deltaV < (-DELTAVOLTMAX)){
deltaV = (-DELTAVOLTMAX);
}
Vset = Vset + deltaV; //[5nV]
if(Vset <= CC->_Vmin){
Vset = CC->_Vmin;
}else if(Vset >= CC->_Vmax){
Vset = CC->_Vmax;
}
}
// int32_t RealV;
// RealV = (int32_t)(deltaV);
// InputNotify(NOTIFY_IMPEDANCE, RealV);
}
#endif
@@ -1,27 +1,25 @@
#ifndef ELITECV3
#define ELITECV3
#define Vset instru.Vset
#define Vset INSTRUCTION.Vset
static void cv_volt_out(void)
{
struct wm_cv_ctx_t *cv = (struct wm_cv_ctx_t *)wm_get();
struct wm_meas_t *m = &cv->measure;
uint16_t DACOutCode;
int32_t Vin;
int32_t Vout;
int32_t DeltaVout;
static uint16_t CV3Curve(CV3Mode *CV3){
static uint16_t DACOutCode;
static int32_t Vin;
static int32_t Vout;
static int32_t DeltaVout;
Vin = m->_measureVin * 200;//[5nV]
if (DACReset) {
Vin = CV3->_measureVin * 200;//[5nV]
if(DACReset){
Vout = Vset + Vin;
} else {
DACReset = false;
}else{
DeltaVout = Vset - (Vout - Vin);
Vout = Vout + DeltaVout;
}
instru.VoltConstant = Vout / 40000 + 25000;//5nV=>usercode
DACOutCode = Usercode_Correction_to_DAC(instru.VoutGainLevel, instru.VoltConstant);
INSTRUCTION.VoltConstant = Vout / 40000 + 25000;//5nV=>usercode
DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, INSTRUCTION.VoltConstant);
int32_t RealV2;
RealV2 = (int32_t)((Vout - Vin) / 200);//[1uV]
@@ -33,110 +31,126 @@ static void cv_volt_out(void)
DAC_outputV(DACOutCode);
return;
return DACOutCode;
}
static void cv_vscan(void)
{
struct wm_cv_ctx_t *cv = (struct wm_cv_ctx_t *)wm_get();
static bool VminCounter;
static bool VmaxCounter;
static void CV3_Vscan(CV3Mode *CV3){
static int16_t VminCounter;
static int16_t VmaxCounter;
static uint16_t CycleCounter;
NotifyCycleNumber = (instru.cycleNumber - cv->_cycleNumber + 1);
NotifyCycleNumber = (INSTRUCTION.cycleNumber - CV3->_cycleNumber + 1);
if (vscanReset) {
VmaxCounter = false;
VminCounter = false;
if(vscanReset){
VmaxCounter = 0;
VminCounter = 0;
CycleCounter = 0;
if (instru.directionInit == 1) {
cv->_direction_up = true;
cv->_current_direction_up = true;
} else {
cv->_direction_up = false;
cv->_current_direction_up = false;
if(INSTRUCTION.directionInit == 1){
CV3->_direction_up = true;
CV3->_current_direction_up = true;
}else{
CV3->_direction_up = false;
CV3->_current_direction_up = false;
}
//Vsetp = x * 20 * N, x=xmV ; N=VscanRate
if (instru.step <= 10) {
cv->_Vstep = instru.step * instru.VsetRate / 5;
} else {
cv->_Vstep = instru.step / 5 * instru.VsetRate;
if(INSTRUCTION.step <= 10){
CV3->_Vstep = INSTRUCTION.step * INSTRUCTION.VsetRate / 5;
}else{
CV3->_Vstep = INSTRUCTION.step / 5 * INSTRUCTION.VsetRate;
}
if (cv->_Vmin == cv->_Vinit) {
VminCounter = true;
if(CV3->_Vmin == CV3->_Vinit){
VminCounter = -1;
}
if (cv->_Vmax == cv->_Vinit) {
VmaxCounter = true;
if(CV3->_Vmax == CV3->_Vinit){
VmaxCounter = -1;
}
Vset = cv->_Vinit;
Vset = CV3->_Vinit;
}
if (!vscanReset) {
if ((instru.Vinit < instru.Ve1 && instru.Vinit < instru.Ve2) ||
(instru.Vinit > instru.Ve1 && instru.Vinit > instru.Ve2)
) {
if (cv->_current_direction_up) {
Vset = Vset + cv->_Vstep * GPT.GptimerMultiple;
} else {
Vset = Vset - cv->_Vstep * GPT.GptimerMultiple;
if(!vscanReset){
if((INSTRUCTION.Vinit < INSTRUCTION.Ve1 && INSTRUCTION.Vinit < INSTRUCTION.Ve2) ||
(INSTRUCTION.Vinit > INSTRUCTION.Ve1 && INSTRUCTION.Vinit > INSTRUCTION.Ve2)
){
if (CV3->_current_direction_up){
Vset = Vset + CV3->_Vstep;
}else{
Vset = Vset - CV3->_Vstep;
}
if (instru.Vinit < instru.Ve1 && instru.Vinit < instru.Ve2) {
if (Vset == cv->_Vmin) {
VminCounter = true;
instru.Vinit = instru.Vmin;
cv->_Vinit = cv->_Vmin;
if(INSTRUCTION.Vinit < INSTRUCTION.Ve1 && INSTRUCTION.Vinit < INSTRUCTION.Ve2){
if(Vset == CV3->_Vmin){
VminCounter = -1;
INSTRUCTION.Vinit = INSTRUCTION.Vmin;
CV3->_Vinit = CV3->_Vmin;
}
} else if (instru.Vinit > instru.Ve1 && instru.Vinit > instru.Ve2) {
if (Vset == cv->_Vmax) {
VmaxCounter = true;
instru.Vinit = instru.Vmax;
cv->_Vinit = cv->_Vmax;
}else if(INSTRUCTION.Vinit > INSTRUCTION.Ve1 && INSTRUCTION.Vinit > INSTRUCTION.Ve2){
if(Vset == CV3->_Vmax){
VmaxCounter = -1;
INSTRUCTION.Vinit = INSTRUCTION.Vmax;
CV3->_Vinit = CV3->_Vmax;
}
}
} else {
if (Vset >= cv->_Vmax) {
VmaxCounter = true;
} else if (Vset <= cv->_Vmin) {
VminCounter = true;
}else{
if (Vset >= CV3->_Vmax){
VmaxCounter++;
}else if (Vset <= CV3->_Vmin){
VminCounter++;
}
if (cv->_current_direction_up) {
Vset = Vset + cv->_Vstep * GPT.GptimerMultiple;
} else {
Vset = Vset - cv->_Vstep * GPT.GptimerMultiple;
if (CV3->_current_direction_up){
Vset = Vset + CV3->_Vstep * GPT.GptimerMultiple;
}else{
Vset = Vset - CV3->_Vstep * GPT.GptimerMultiple;
}
if (VmaxCounter && VminCounter) {
if (cv->_direction_up && cv->_current_direction_up) {
if (Vset >= cv->_Vinit) {
cv->_cycleNumber--;
VminCounter = false;
VmaxCounter = false;
if(VmaxCounter != 0 && VminCounter != 0){
if(VmaxCounter == VminCounter && CV3->_direction_up && CV3->_current_direction_up){
if(CycleCounter != VmaxCounter){
if(Vset >= CV3->_Vinit){
CV3->_cycleNumber--;
CycleCounter = VmaxCounter; //VmaxCounter = VminCounter = CycleCounter
}
}
}
if (!cv->_direction_up && !cv->_current_direction_up) {
if (Vset <= cv->_Vinit) {
cv->_cycleNumber--;
VminCounter = false;
VmaxCounter = false;
if(VmaxCounter == VminCounter && !CV3->_direction_up && !CV3->_current_direction_up){
if(CycleCounter != VmaxCounter){
if(Vset <= CV3->_Vinit){
CV3->_cycleNumber--;
CycleCounter = VmaxCounter; //VmaxCounter = VminCounter = CycleCounter
}
}
}
}
if (Vset >= cv->_Vmax) {
cv->_current_direction_up = false;
} else if (Vset <= cv->_Vmin) {
cv->_current_direction_up = true;
if (Vset >= CV3->_Vmax){
CV3->_current_direction_up = false;
}else if (Vset <= CV3->_Vmin){
CV3->_current_direction_up = true;
}
/*stop condition*/
if (cv->_cycleNumber == 0) {
PeriodicEvent = false;
if(CV3->_cycleNumber == 0){
// PeriodicEvent = false;
ModeLED(POST_WORK);
InitEliteFlag();
INSTRUCTION.eliteFxn = CONSTANT_CURRENT;
INSTRUCTION.sampleRate = 15;
INSTRUCTION.charge = 0x01;
INSTRUCTION.constantCurrent = 0x00;
INSTRUCTION.Vmax = 0xC350;
INSTRUCTION.Vmin = 0x0000;
INSTRUCTION.notifyRate = 500;
INSTRUCTION.VoViSwitch = 0x02;//read Vscan = Vout - Vin
}
}
}
// int32_t RealV;
// RealV = (int32_t)(Vset / 500);//[1uV]
// InputNotify(NOTIFY_VOLT, RealV);
}
#endif
@@ -2,82 +2,215 @@
#ifndef ELITECV
#define ELITECV
static void iv_cy_vscan(void)
{
struct wm_iv_cy_ctx_t *iv_cy = (struct wm_iv_cy_ctx_t *)wm_get();
static bool VminCounter;
static bool VmaxCounter;
static uint16_t SWVCurve(WorkMode *WorkModeData) {
static uint8_t counter;
static uint16_t outputV;
static uint16_t Volt;
static bool direction_up;
NotifyCycleNumber = (instru.cycleNumber - iv_cy->_cycleNumber + 1);
// reset origin volt at the begin
if (DACReset) {
Volt = INSTRUCTION.Ve1;
outputV = INSTRUCTION.Ve1;
if (INSTRUCTION.Ve1 < INSTRUCTION.Ve2)
direction_up = true;
else
direction_up = false;
counter = 1;
DACReset = false;
}
if (counter == 2 * PulseWidth)
counter = 1;
else
counter++;
// output a certain volt
outputV = Volt;
DAC_outputV(outputV);
// VoltValue = (ramp1*16 + ramp0/16) * 3.05;
// check if we reach the final volt
if ((outputV >= INSTRUCTION.Ve2 && direction_up) || (outputV <= INSTRUCTION.Ve2 && !direction_up)) {
PeriodicEvent = false;
DACReset = true;
}
// prepare the next output volt
if (direction_up) {
if (counter == PulseWidth)
Volt = Volt + Amplitude;
else if (counter == 2 * PulseWidth)
Volt = Volt - (Amplitude - INSTRUCTION.step);
else
Volt = Volt;
} else {
if (counter == PulseWidth)
Volt = Volt - Amplitude;
else if (counter == 2 * PulseWidth)
Volt = Volt + (Amplitude - INSTRUCTION.step);
else
Volt = Volt;
}
return outputV;
}
static uint16_t DPVCurve(WorkMode *WorkModeData) {
static uint8_t counter;
static uint16_t Volt1;
static uint16_t Volt2;
static uint16_t outputV;
static bool direction_up;
// reset origin volt at the begin
if (DACReset) {
if (INSTRUCTION.Ve1 < INSTRUCTION.Ve2)
direction_up = true;
else
direction_up = false;
Volt1 = INSTRUCTION.Ve1;
if (direction_up)
Volt2 = INSTRUCTION.Ve1 + Amplitude;
else
Volt2 = INSTRUCTION.Ve1 - Amplitude;
counter = 1;
DACReset = false;
}
if (counter == PulsePeriod)
counter = 1;
else
counter++;
// output a certain volt
if (counter <= (PulsePeriod - PulseWidth)) {
outputV = Volt1;
DAC_outputV(Volt1);
} else {
outputV = Volt2;
DAC_outputV(Volt2);
}
// VoltValue = (ramp1*16 + ramp0/16) * 3.05;
// check if we reach the final volt
if (((outputV >= INSTRUCTION.Ve2) && direction_up) || ((outputV <= INSTRUCTION.Ve2) && !direction_up)) {
PeriodicEvent = false;
DACReset = true;
}
// check overflow/underflow and prepare for next output
if (direction_up) {
if (Volt1 + INSTRUCTION.step < Volt1)
Volt1 = 0xffff;
else
Volt1 = Volt1 + INSTRUCTION.step;
if (Volt2 + INSTRUCTION.step < Volt2)
Volt2 = 0xffff;
else
Volt2 = Volt2 + INSTRUCTION.step;
} else {
if (Volt1 - INSTRUCTION.step > Volt1)
Volt1 = 0x0000;
else
Volt1 = Volt1 - INSTRUCTION.step;
if (Volt2 - INSTRUCTION.step > Volt2)
Volt2 = 0x0000;
else
Volt2 = Volt2 - INSTRUCTION.step;
}
if (counter + 1 <= (PulsePeriod - PulseWidth)) {
return Volt1;
} else {
return Volt2;
}
}
static void CV_Vscan(CVMode *CV){
static int16_t VminCounter;
static int16_t VmaxCounter;
static uint16_t CycleCounter;
NotifyCycleNumber = (INSTRUCTION.cycleNumber - CV->_cycleNumber + 1);
if(vscanReset){
VmaxCounter = false;
VminCounter = false;
VmaxCounter = 0;
VminCounter = 0;
CycleCounter = 0;
if(instru.directionInit == 1){
iv_cy->_direction_up = true;
iv_cy->_current_direction_up = true;
}else if(instru.directionInit == 0){
iv_cy->_direction_up = false;
iv_cy->_current_direction_up = false;
if(INSTRUCTION.directionInit == 1){
CV->_direction_up = true;
CV->_current_direction_up = true;
}else if(INSTRUCTION.directionInit == 0){
CV->_direction_up = false;
CV->_current_direction_up = false;
}
//Vsetp = x * 20 * N, x=xmV ; N=VscanRate
if(instru.step <= 10){
iv_cy->_Vstep = instru.step * instru.VsetRate / 5;
if(INSTRUCTION.step <= 10){
CV->_Vstep = INSTRUCTION.step * INSTRUCTION.VsetRate / 5;
}else{
iv_cy->_Vstep = instru.step / 5 * instru.VsetRate;
CV->_Vstep = INSTRUCTION.step / 5 * INSTRUCTION.VsetRate;
}
if(iv_cy->_Vmin == iv_cy->_Vinit){
VminCounter = true;
if(CV->_Vmin == CV->_Vinit){
VminCounter = -1;
}
if(iv_cy->_Vmax == iv_cy->_Vinit){
VmaxCounter = true;
if(CV->_Vmax == CV->_Vinit){
VmaxCounter = -1;
}
Vset = iv_cy->_Vinit;
Vset = CV->_Vinit;
}
if(!vscanReset){
if (Vset >= iv_cy->_Vmax){
VmaxCounter = true;
}else if (Vset <= iv_cy->_Vmin){
VminCounter = true;
if (Vset >= CV->_Vmax){
VmaxCounter++;
}else if (Vset <= CV->_Vmin){
VminCounter++;
}
if (iv_cy->_current_direction_up){
Vset = Vset + iv_cy->_Vstep * GPT.GptimerMultiple;
if (CV->_current_direction_up){
Vset = Vset + CV->_Vstep * GPT.GptimerMultiple;
}else{
Vset = Vset - iv_cy->_Vstep * GPT.GptimerMultiple;
Vset = Vset - CV->_Vstep * GPT.GptimerMultiple;
}
if(VmaxCounter && VminCounter){
if(iv_cy->_direction_up && iv_cy->_current_direction_up){
if(Vset >= iv_cy->_Vinit){
iv_cy->_cycleNumber--;
VminCounter = false;
VmaxCounter = false;
if(VmaxCounter != 0 && VminCounter != 0){
if(VmaxCounter == VminCounter && CV->_direction_up && CV->_current_direction_up){
if(CycleCounter != VmaxCounter){
if(Vset >= CV->_Vinit){
CV->_cycleNumber--;
CycleCounter = VmaxCounter; //VmaxCounter = VminCounter = CycleCounter
}
}
}
if(!iv_cy->_direction_up && !iv_cy->_current_direction_up){
if(Vset <= iv_cy->_Vinit){
iv_cy->_cycleNumber--;
VminCounter = false;
VmaxCounter = false;
if(VmaxCounter == VminCounter && !CV->_direction_up && !CV->_current_direction_up){
if(CycleCounter != VmaxCounter){
if(Vset <= CV->_Vinit){
CV->_cycleNumber--;
CycleCounter = VmaxCounter; //VmaxCounter = VminCounter = CycleCounter
}
}
}
}
if (Vset >= iv_cy->_Vmax){
iv_cy->_current_direction_up = false;
}else if (Vset <= iv_cy->_Vmin){
iv_cy->_current_direction_up = true;
if (Vset >= CV->_Vmax){
CV->_current_direction_up = false;
}else if (Vset <= CV->_Vmin){
CV->_current_direction_up = true;
}
/*stop condition*/
if(iv_cy->_cycleNumber == 0){
if(CV->_cycleNumber == 0){
PeriodicEvent = false;
ModeLED(NO_EVENT);
}
}
}
@@ -1,27 +1,25 @@
#ifndef ELITECVSCAN
#define ELITECVSCAN
#define Vset instru.Vset
#define Vset INSTRUCTION.Vset
static void ca_volt_out(void)
{
struct wm_ca_ctx_t *ca = (struct wm_ca_ctx_t *)wm_get();
struct wm_meas_t *m = &ca->measure;
uint16_t DACOutCode;
int32_t Vin;
int32_t Vout;
int32_t DeltaVout;
static uint16_t CVSCANCurve(CVSCANMode *CVSCAN){
static uint16_t DACOutCode;
static int32_t Vin;
static int32_t Vout;
static int32_t DeltaVout;
Vin = m->_measureVin * 200;//[5nV]
if (DACReset) {
Vin = CVSCAN->_measureVin * 200;//[5nV]
if(DACReset){
Vout = Vset + Vin;
} else {
DACReset = false;
}else{
DeltaVout = Vset - (Vout - Vin);
Vout = Vout + DeltaVout;
}
instru.VoltConstant = Vout / 40000 + 25000;//5nV=>usercode
DACOutCode = Usercode_Correction_to_DAC(instru.VoutGainLevel, instru.VoltConstant);
INSTRUCTION.VoltConstant = Vout / 40000 + 25000;//5nV=>usercode
DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, INSTRUCTION.VoltConstant);
int32_t RealV2;
RealV2 = (int32_t)((Vout - Vin) / 200);//[1uV]
@@ -33,19 +31,17 @@ static void ca_volt_out(void)
DAC_outputV(DACOutCode);
return;
return DACOutCode;
}
static void ca_vscan(void)
{
struct wm_ca_ctx_t *ca = (struct wm_ca_ctx_t *)wm_get();
static void CVSCAN_Vscan(CVSCANMode *CVSCAN){
if(vscanReset){
Vset = ca->_Vinit;
Vset = CVSCAN->_Vinit;
}
if(!vscanReset){
Vset = ca->_Vinit;
Vset = CVSCAN->_Vinit;
}
}
#endif
@@ -94,25 +94,25 @@ static void AutoGainChangeVout(int32_t userCode){
// switch to 1 level volt(small) 15K
// switch to 2 level volt(large) 240K
if(instru.VoutGainLevel == VOUT_GAIN_AUTO){
instru.VoutGainLevel = VOUT_GAIN_15K;
VoutGainControl(instru.VoutGainLevel);
if(INSTRUCTION.VoutGainLevel == VOUT_GAIN_AUTO){
INSTRUCTION.VoutGainLevel = VOUT_GAIN_15K;
VoutGainControl(INSTRUCTION.VoutGainLevel);
record_flag = false;
}
if(instru.VoutGainLevel == VOUT_GAIN_15K){
if(INSTRUCTION.VoutGainLevel == VOUT_GAIN_15K){
if(RealVolt > DAC_VOUT_GAIN_LARGE_BOUNDARY || RealVolt < -1 * DAC_VOUT_GAIN_LARGE_BOUNDARY){
// switch to 2 level volt(large)
instru.VoutGainLevel = VOUT_GAIN_240K;
VoutGainControl(instru.VoutGainLevel);
INSTRUCTION.VoutGainLevel = VOUT_GAIN_240K;
VoutGainControl(INSTRUCTION.VoutGainLevel);
record_flag = false;
}
}
else if(instru.VoutGainLevel == VOUT_GAIN_240K){
else if(INSTRUCTION.VoutGainLevel == VOUT_GAIN_240K){
if(RealVolt < DAC_VOUT_GAIN_SMALL_BOUNDARY && RealVolt > -1 * DAC_VOUT_GAIN_SMALL_BOUNDARY ){
// switch to 1 level volt(small)
instru.VoutGainLevel = VOUT_GAIN_15K;
VoutGainControl(instru.VoutGainLevel);
INSTRUCTION.VoutGainLevel = VOUT_GAIN_15K;
VoutGainControl(INSTRUCTION.VoutGainLevel);
record_flag = false;
}
}
@@ -29,7 +29,7 @@
*/
#define BOARD_C903
#define BOARD_C7A1
typedef struct _formula{
@@ -46,10 +46,44 @@ struct _correction{
uint16_t Gain0Boundary[2];
uint16_t Gain1Boundary[4];
uint16_t Gain2Boundary[2];
uint16_t Usercode2DAC15v;
} Correction =
#ifdef BOARD_C7A1 //megafly
#ifdef BOARD_C6E1 //not well
{
.ADC_volt[0].coeff = (-6251051),
.ADC_volt[0].offset = 102081366120,
.ADC_volt[1].coeff = (-6251051),
.ADC_volt[1].offset = 102081366120,
.ADC_volt[2].coeff = (-6251051),
.ADC_volt[2].offset = 102081366120,
.ADC_current[0].coeff = 2079230,
.ADC_current[0].offset = (-34256067906),
.ADC_current[1].coeff = 64550018,
.ADC_current[1].offset = (-1063052554820),
.ADC_current[2].coeff = 2096336928,
.ADC_current[2].offset = (-34514344284104),
.ADC_current[3].coeff = 60200953965,
.ADC_current[3].offset = (-991270580672004),
.Usercode2DAC[0].coeff = (-10511469),
.Usercode2DAC[0].offset = 563770560100,
.Usercode2DAC[1].coeff = (-10511469),
.Usercode2DAC[1].offset = 563770560100,
.Usercode2DAC15v = MEGA_15V,
};
#endif
#ifdef BOARD_C7A1
{
.ADC_volt[0].coeff = (6256),
.ADC_volt[0].offset = -101532028,
@@ -78,11 +112,77 @@ struct _correction{
.Usercode2DAC[1].coeff = (-178077711),
.Usercode2DAC[1].offset = 4777894559527,
//.Usercode2DAC15v = 41485,
.Usercode2DAC15v = 41485,
};
#endif
#ifdef BOARD_C724 //megafly
#ifdef BOARD_C6D4 //not well
{
.ADC_volt[0].coeff = (6226),
.ADC_volt[0].offset = -100075170,
.ADC_volt[1].coeff = (215972),
.ADC_volt[1].offset = -3484380085,
.ADC_volt[2].coeff = (6223818),
.ADC_volt[2].offset = -100571214617,
.ADC_current[0].coeff = 3136256,
.ADC_current[0].offset = (-50747854551),
.ADC_current[1].coeff = 72219340,
.ADC_current[1].offset = (-1168719058378),
.ADC_current[2].coeff = 1450319129,
.ADC_current[2].offset = (-23465744053517),
.ADC_current[3].coeff = 30710734735,
.ADC_current[3].offset = (-496978137538345),
.Usercode2DAC[0].coeff = (-10543212),
.Usercode2DAC[0].offset = 582976692942,
.Usercode2DAC[1].coeff = (-178746005),
.Usercode2DAC[1].offset = 4789272862069,
.Usercode2DAC15v = MEGA_15V,
};
#endif
#ifdef BOARD_C771 //not well
{
.ADC_volt[0].coeff = (6301),
.ADC_volt[0].offset = -102184705,
.ADC_volt[1].coeff = (216877),
.ADC_volt[1].offset = -3519583281,
.ADC_volt[2].coeff = (6298448),
.ADC_volt[2].offset = -102304286091,
.ADC_current[0].coeff = 3115431,
.ADC_current[0].offset = (-50586460394),
.ADC_current[1].coeff = 71203612,
.ADC_current[1].offset = (-1156022105141),
.ADC_current[2].coeff = 1451318434,
.ADC_current[2].offset = (-23560731221983),
.ADC_current[3].coeff = 30518004246,
.ADC_current[3].offset = (-495456618814855),
.Usercode2DAC[0].coeff = (-10568719),
.Usercode2DAC[0].offset = 585036272447,
.Usercode2DAC[1].coeff = (-179441058),
.Usercode2DAC[1].offset = 4807380622351,
.Usercode2DAC15v = MEGA_15V,
};
#endif
#ifdef BOARD_C724
{
.ADC_volt[0].coeff = (6251),
.ADC_volt[0].offset = -99750397,
@@ -111,11 +211,11 @@ struct _correction{
.Usercode2DAC[1].coeff = (-179175265),
.Usercode2DAC[1].offset = 4801179734836,
//.Usercode2DAC15v = MEGA_15V,
.Usercode2DAC15v = MEGA_15V,
};
#endif
#ifdef BOARD_C874 //megafly
#ifdef BOARD_C874
{
.ADC_volt[0].coeff = (6260),
.ADC_volt[0].offset = -99787811,
@@ -144,381 +244,10 @@ struct _correction{
.Usercode2DAC[1].coeff = (-178920333),
.Usercode2DAC[1].offset = 4794801719146,
//.Usercode2DAC15v = 41355,
.Usercode2DAC15v = 41355,
};
#endif
#ifdef BOARD_C604
{
.ADC_volt[0].coeff = (6194),
.ADC_volt[0].offset = -100974071,
.ADC_volt[1].coeff = (215506),
.ADC_volt[1].offset = -3517864544,
.ADC_volt[2].coeff = (6243728),
.ADC_volt[2].offset = -102012564806,
.ADC_current[0].coeff = 3139436,
.ADC_current[0].offset = (-51217085818),
.ADC_current[1].coeff = 71622830,
.ADC_current[1].offset = (-1168462302473),
.ADC_current[2].coeff = 1462344785,
.ADC_current[2].offset = (-23855062972762),
.ADC_current[3].coeff = 30689232716,
.ADC_current[3].offset = (-500670762245868),
.Usercode2DAC[0].coeff = (-10507403),
.Usercode2DAC[0].offset = 582940058695,
.Usercode2DAC[1].coeff = (-178479878),
.Usercode2DAC[1].offset = 4782895510276,
};
#endif
#ifdef BOARD_C69F
{
.ADC_volt[0].coeff = (6118),
.ADC_volt[0].offset = -99518615,
.ADC_volt[1].coeff = (209748),
.ADC_volt[1].offset = -3417768725,
.ADC_volt[2].coeff = (6131501),
.ADC_volt[2].offset = -99999128933,
.ADC_current[0].coeff = 3148514,
.ADC_current[0].offset = (-50485662786),
.ADC_current[1].coeff = 71804564,
.ADC_current[1].offset = (-1151299062516),
.ADC_current[2].coeff = 1463584080,
.ADC_current[2].offset = (-23465643586165),
.ADC_current[3].coeff = 30747070723,
.ADC_current[3].offset = (-492979538892707),
.Usercode2DAC[0].coeff = (-10534427),
.Usercode2DAC[0].offset = 577647889649,
.Usercode2DAC[1].coeff = (-178317702),
.Usercode2DAC[1].offset = 4773350420707,
};
#endif
#ifdef BOARD_C903
{
.ADC_volt[0].coeff = (6268),
.ADC_volt[0].offset = -103687047,
.ADC_volt[1].coeff = (216289),
.ADC_volt[1].offset = -3581110600,
.ADC_volt[2].coeff = (6255165),
.ADC_volt[2].offset = -103653080405,
.ADC_current[0].coeff = 3136844,
.ADC_current[0].offset = (-51057548335),
.ADC_current[1].coeff = 71729828,
.ADC_current[1].offset = (-1167474302377),
.ADC_current[2].coeff = 1457587112,
.ADC_current[2].offset = (-23722230272507),
.ADC_current[3].coeff = 30688020320,
.ADC_current[3].offset = (-499567626613052),
.Usercode2DAC[0].coeff = (-10538549),
.Usercode2DAC[0].offset = 582561125327,
.Usercode2DAC[1].coeff = (-179443367),
.Usercode2DAC[1].offset = 4806000714268,
};
#endif
#ifdef BOARD_C60C
{
.ADC_volt[0].coeff = (6232),
.ADC_volt[0].offset = -100384012,
.ADC_volt[1].coeff = (216642),
.ADC_volt[1].offset = -3529452462,
.ADC_volt[2].coeff = (6233108),
.ADC_volt[2].offset = -100604531870,
.ADC_current[0].coeff = 3145651,
.ADC_current[0].offset = (-51102123184),
.ADC_current[1].coeff = 71727284,
.ADC_current[1].offset = (-1165169041311),
.ADC_current[2].coeff = 1463455403,
.ADC_current[2].offset = (-23772125686630),
.ADC_current[3].coeff = 30773610135,
.ADC_current[3].offset = (-499913505030514),
.Usercode2DAC[0].coeff = (-10570464),
.Usercode2DAC[0].offset = 583479916773,
.Usercode2DAC[1].coeff = (-178725281),
.Usercode2DAC[1].offset = 4787957689974,
};
#endif
#ifdef BOARD_C78B
{
.ADC_volt[0].coeff = (6242),
.ADC_volt[0].offset = -101356025,
.ADC_volt[1].coeff = (215624),
.ADC_volt[1].offset = -3503045312,
.ADC_volt[2].coeff = (6243816),
.ADC_volt[2].offset = -101524034738,
.ADC_current[0].coeff = 3131950,
.ADC_current[0].offset = (-50953509336),
.ADC_current[1].coeff = 71591803,
.ADC_current[1].offset = (-1164676104750),
.ADC_current[2].coeff = 1457994881,
.ADC_current[2].offset = (-23717445756897),
.ADC_current[3].coeff = 30731877501,
.ADC_current[3].offset = (-499947688305697),
.Usercode2DAC[0].coeff = (-10509141),
.Usercode2DAC[0].offset = 581313489845,
.Usercode2DAC[1].coeff = (-177847688),
.Usercode2DAC[1].offset = 4765751343445,
};
#endif
#ifdef BOARD_C615
{
.ADC_volt[0].coeff = (6213),
.ADC_volt[0].offset = -100904734,
.ADC_volt[1].coeff = (213486),
.ADC_volt[1].offset = -3475774161,
.ADC_volt[2].coeff = (6220838),
.ADC_volt[2].offset = -101367452805,
.ADC_current[0].coeff = 3133669,
.ADC_current[0].offset = (-50985338691),
.ADC_current[1].coeff = 71848701,
.ADC_current[1].offset = (-1168930549263),
.ADC_current[2].coeff = 1465220422,
.ADC_current[2].offset = (-23836711044239),
.ADC_current[3].coeff = 30753809644,
.ADC_current[3].offset = (-500364315274466),
.Usercode2DAC[0].coeff = (-10519306),
.Usercode2DAC[0].offset = 583547544303,
.Usercode2DAC[1].coeff = (-179481859),
.Usercode2DAC[1].offset = 4808633144378,
};
#endif
#ifdef BOARD_C797
{
.ADC_volt[0].coeff = (6285),
.ADC_volt[0].offset = -102399765,
.ADC_volt[1].coeff = (217179),
.ADC_volt[1].offset = -3541219740,
.ADC_volt[2].coeff = (6293290),
.ADC_volt[2].offset = -102701705789,
.ADC_current[0].coeff = 3124793,
.ADC_current[0].offset = (-50785593516),
.ADC_current[1].coeff = 71661923,
.ADC_current[1].offset = (-1164632411724),
.ADC_current[2].coeff = 1459117290,
.ADC_current[2].offset = (-23712400276764),
.ADC_current[3].coeff = 30624856407,
.ADC_current[3].offset = (-497729976849926),
.Usercode2DAC[0].coeff = (-10517402),
.Usercode2DAC[0].offset = 581255473226,
.Usercode2DAC[1].coeff = (-178353177),
.Usercode2DAC[1].offset = 4777407394955,
};
#endif
#ifdef BOARD_C639
{
.ADC_volt[0].coeff = (6208),
.ADC_volt[0].offset = -100729867,
.ADC_volt[1].coeff = (214500),
.ADC_volt[1].offset = -3488858165,
.ADC_volt[2].coeff = (6228268),
.ADC_volt[2].offset = -101395718164,
.ADC_current[0].coeff = 3139511,
.ADC_current[0].offset = (-51174954874),
.ADC_current[1].coeff = 71851912,
.ADC_current[1].offset = (-1171152880960),
.ADC_current[2].coeff = 1461965017,
.ADC_current[2].offset = (-23828340962540),
.ADC_current[3].coeff = 30773724865,
.ADC_current[3].offset = (-501611882239925),
.Usercode2DAC[0].coeff = (-10520659),
.Usercode2DAC[0].offset = 581192312483,
.Usercode2DAC[1].coeff = (-177973792),
.Usercode2DAC[1].offset = 4768259045109,
};
#endif
#ifdef BOARD_C5CD
{
.ADC_volt[0].coeff = (6279),
.ADC_volt[0].offset = -100548659,
.ADC_volt[1].coeff = (216253),
.ADC_volt[1].offset = -3471891549,
.ADC_volt[2].coeff = (6277392),
.ADC_volt[2].offset = -100862395596,
.ADC_current[0].coeff = 3136805,
.ADC_current[0].offset = (-50213343000),
.ADC_current[1].coeff = 72032077,
.ADC_current[1].offset = (-1153034516566),
.ADC_current[2].coeff = 1465628098,
.ADC_current[2].offset = (-23459820455868),
.ADC_current[3].coeff = 30833759075,
.ADC_current[3].offset = (-493561287778940),
.Usercode2DAC[0].coeff = (-10522269),
.Usercode2DAC[0].offset = 578531626885,
.Usercode2DAC[1].coeff = (-177684018),
.Usercode2DAC[1].offset = 4759051659585,
};
#endif
#ifdef BOARD_C771 //die
{
.ADC_volt[0].coeff = (6301),
.ADC_volt[0].offset = -102184705,
.ADC_volt[1].coeff = (216877),
.ADC_volt[1].offset = -3519583281,
.ADC_volt[2].coeff = (6298448),
.ADC_volt[2].offset = -102304286091,
.ADC_current[0].coeff = 3115431,
.ADC_current[0].offset = (-50586460394),
.ADC_current[1].coeff = 71203612,
.ADC_current[1].offset = (-1156022105141),
.ADC_current[2].coeff = 1451318434,
.ADC_current[2].offset = (-23560731221983),
.ADC_current[3].coeff = 30518004246,
.ADC_current[3].offset = (-495456618814855),
.Usercode2DAC[0].coeff = (-10568719),
.Usercode2DAC[0].offset = 585036272447,
.Usercode2DAC[1].coeff = (-179441058),
.Usercode2DAC[1].offset = 4807380622351,
};
#endif
#ifdef BOARD_C6E1 // not well
{
.ADC_volt[0].coeff = (-6251051),
.ADC_volt[0].offset = 102081366120,
.ADC_volt[1].coeff = (-6251051),
.ADC_volt[1].offset = 102081366120,
.ADC_volt[2].coeff = (-6251051),
.ADC_volt[2].offset = 102081366120,
.ADC_current[0].coeff = 2079230,
.ADC_current[0].offset = (-34256067906),
.ADC_current[1].coeff = 64550018,
.ADC_current[1].offset = (-1063052554820),
.ADC_current[2].coeff = 2096336928,
.ADC_current[2].offset = (-34514344284104),
.ADC_current[3].coeff = 60200953965,
.ADC_current[3].offset = (-991270580672004),
.Usercode2DAC[0].coeff = (-10511469),
.Usercode2DAC[0].offset = 563770560100,
.Usercode2DAC[1].coeff = (-10511469),
.Usercode2DAC[1].offset = 563770560100,
};
#endif
#ifdef BOARD_C6D4 // not well
{
.ADC_volt[0].coeff = (6226),
.ADC_volt[0].offset = -100075170,
.ADC_volt[1].coeff = (215972),
.ADC_volt[1].offset = -3484380085,
.ADC_volt[2].coeff = (6223818),
.ADC_volt[2].offset = -100571214617,
.ADC_current[0].coeff = 3136256,
.ADC_current[0].offset = (-50747854551),
.ADC_current[1].coeff = 72219340,
.ADC_current[1].offset = (-1168719058378),
.ADC_current[2].coeff = 1450319129,
.ADC_current[2].offset = (-23465744053517),
.ADC_current[3].coeff = 30710734735,
.ADC_current[3].offset = (-496978137538345),
.Usercode2DAC[0].coeff = (-10543212),
.Usercode2DAC[0].offset = 582976692942,
.Usercode2DAC[1].coeff = (-178746005),
.Usercode2DAC[1].offset = 4789272862069,
};
#endif
// this function turn ADC measure value (0xXXXX) into real voltage
// unit should be uV
static int32_t DecodeADCVolt(uint8_t ADCGain, uint16_t ADC_measure){
@@ -7,6 +7,7 @@ struct _CT{
uint32_t SampleRate_counter;
uint16_t StepTimeCounter;
uint16_t NotifyCounter;
uint32_t StandByCounter;
}CT = {0};
// GPT counter
@@ -22,8 +23,19 @@ struct _GPT{
uint32_t BatteryCheckCounter;
uint32_t GptimerMultiple;
uint32_t StiCounter;
uint32_t LedGCounter;
uint32_t LedRCounter;
uint32_t Gas0Counter;
uint32_t Gas1Counter;
}GPT = {0};
static void InitCT(){
CT.SampleRate_counter = 1;
CT.StepTimeCounter = 1;
CT.NotifyCounter = 1;
CT.StandByCounter = 0;
}
static void InitGPT(){
GPT.GptimerCounter = 0;
GPT.GptimerCounter0 = 0;
@@ -35,5 +47,9 @@ static void InitGPT(){
GPT.BatteryADCCounter = 0;
GPT.BatteryCheckCounter = 0;
GPT.StiCounter = 0;
GPT.LedGCounter = 0;
GPT.LedRCounter = 0;
GPT.Gas0Counter = 0;
GPT.Gas1Counter = 0;
}
#endif
@@ -2,61 +2,47 @@
#ifndef ELITEIV
#define ELITEIV
#define Vset instru.Vset
#define Vset INSTRUCTION.Vset
static void iv_vscan(void)
{
struct wm_iv_ctx_t *iv = (struct wm_iv_ctx_t *)wm_get();
if (vscanReset) {
if (instru.directionInit == 1) {
iv->_direction_up = true;
iv->_current_direction_up = true;
} else if (instru.directionInit == 0) {
iv->_direction_up = false;
iv->_current_direction_up = false;
static void IV_Vscan(IVMode *IV){
if(vscanReset){
if(INSTRUCTION.directionInit == 1){
IV->_direction_up = true;
IV->_current_direction_up = true;
}else if(INSTRUCTION.directionInit == 0){
IV->_direction_up = false;
IV->_current_direction_up = false;
}
//Vsetp = x * 20 * N, x=xmV ; N=VscanRate
if (instru.step <= 10) {
iv->_Vstep = instru.step * instru.VsetRate / 5;
} else {
iv->_Vstep = instru.step / 5 * instru.VsetRate;
if(INSTRUCTION.step <= 10){
IV->_Vstep = INSTRUCTION.step * INSTRUCTION.VsetRate / 5;
}else{
IV->_Vstep = INSTRUCTION.step / 5 * INSTRUCTION.VsetRate;
}
Vset = iv->_Vinit;
Vset = IV->_Vinit;
}
if (!vscanReset) {
if (iv->_current_direction_up) {
if (Vset >= iv->_Vmax) {
if(!vscanReset){
if(IV->_current_direction_up){
if(Vset >= IV->_Vmax){
PeriodicEvent = false;
ModeLED(NO_EVENT);
}
} else {
if (Vset <= iv->_Vmin) {
}else{
if(Vset <= IV->_Vmin){
PeriodicEvent = false;
ModeLED(NO_EVENT);
}
}
if (iv->_current_direction_up) {
Vset = Vset + iv->_Vstep * GPT.GptimerMultiple;
} else {
Vset = Vset - iv->_Vstep * GPT.GptimerMultiple;
if (IV->_current_direction_up){
Vset = Vset + IV->_Vstep * GPT.GptimerMultiple;
}else{
Vset = Vset - IV->_Vstep * GPT.GptimerMultiple;
}
}
}
static void vo_vscan(void)
{
struct wm_vo_ctx_t *vo = (struct wm_vo_ctx_t *)wm_get();
if (vscanReset) {
Vset = vo->_Vinit;
}
if(!vscanReset) {
Vset = vo->_Vinit;
}
}
#endif
@@ -1,14 +1,44 @@
#ifndef __INSTR_H__
#define __INSTR_H__
#ifdef __cpulsplus
extern "C" {
#endif
#ifndef ELITEINSTRUCTION
#define ELITEINSTRUCTION
/** Iin, Vin, Vout **/
#define IIN_ADC 0x00
#define VIN_ADC 0x01
#define VOUT_DAC 0x02
#define HIGH_Z 0x03
/** ADC Iin gain level **/
#define I_GAIN_3M 0x00 // largest gain
#define I_GAIN_100K 0x01
#define I_GAIN_3K 0x02
#define I_GAIN_100R 0x03 // the least gain
#define I_GAIN_AUTO 0x04
/** ADC Vin gain level **/
#define VIN_GAIN_1M 0x00
#define VIN_GAIN_30K 0x01
#define VIN_GAIN_1K 0x02
#define VIN_GAIN_AUTO 0x03
/** Vout gain level **/
#define VOUT_GAIN_240K 0x00
#define VOUT_GAIN_15K 0x01
#define VOUT_GAIN_AUTO 0x02
/* DAC reset parameter */
#define DAC_ZERO 25000
// Step time macro
#define STEPTIME_HALF_SEC 5000
#define STEPTIME_ONE_SEC 10000
#define STEPTIME_TWO_SEC 20000
/*==============================
==== headstage instruction ====
=============================*/
struct HEADSTAGE_INSTRUCTION {
uint8_t chip_id;
uint8_t eliteFxn;
@@ -26,7 +56,7 @@ struct HEADSTAGE_INSTRUCTION {
int32_t Vmin;
/** ADC parameter **/
uint8_t notifyRateIndex;
uint8_t sampleRateIndex;
uint32_t sampleRate;
uint8_t VoViSwitch;
uint8_t AutoGainEnable;
@@ -62,43 +92,79 @@ struct HEADSTAGE_INSTRUCTION {
uint16_t sti_cy;
uint16_t sti_loop;
uint8_t ledG_sw1;
uint8_t ledG_sw2;
uint8_t ledG_sw3;
uint8_t ledG_sw4;
uint8_t ledG_sw5;
uint8_t ledG_sw6;
uint8_t ledG_sw7;
int32_t ledG_t1;
int32_t ledG_t2;
int32_t ledG_t3;
int32_t ledG_t4;
int32_t ledG_t5;
int32_t ledG_t6;
int32_t ledG_t7;
uint16_t ledG_cy;
uint16_t ledG_loop;
uint8_t ledR_sw1;
uint8_t ledR_sw2;
uint8_t ledR_sw3;
uint8_t ledR_sw4;
uint8_t ledR_sw5;
uint8_t ledR_sw6;
uint8_t ledR_sw7;
int32_t ledR_t1;
int32_t ledR_t2;
int32_t ledR_t3;
int32_t ledR_t4;
int32_t ledR_t5;
int32_t ledR_t6;
int32_t ledR_t7;
uint16_t ledR_cy;
uint16_t ledR_loop;
uint8_t gas0_sw1;
uint8_t gas0_sw2;
uint8_t gas0_sw3;
uint8_t gas0_sw4;
uint8_t gas0_sw5;
uint8_t gas0_sw6;
uint8_t gas0_sw7;
int32_t gas0_t1;
int32_t gas0_t2;
int32_t gas0_t3;
int32_t gas0_t4;
int32_t gas0_t5;
int32_t gas0_t6;
int32_t gas0_t7;
uint16_t gas0_cy;
uint16_t gas0_loop;
uint8_t gas1_sw1;
uint8_t gas1_sw2;
uint8_t gas1_sw3;
uint8_t gas1_sw4;
uint8_t gas1_sw5;
uint8_t gas1_sw6;
uint8_t gas1_sw7;
int32_t gas1_t1;
int32_t gas1_t2;
int32_t gas1_t3;
int32_t gas1_t4;
int32_t gas1_t5;
int32_t gas1_t6;
int32_t gas1_t7;
uint16_t gas1_cy;
uint16_t gas1_loop;
uint16_t StepTime;
uint8_t AdcChannel;
} instru = {0};
/** Iin, Vin, Vout **/
#define IIN_ADC 0x00
#define VIN_ADC 0x01
#define VOUT_DAC 0x02
#define HIGH_Z 0x03
/** ADC Iin gain level **/
#define I_GAIN_3M 0x00 // largest gain
#define I_GAIN_100K 0x01
#define I_GAIN_3K 0x02
#define I_GAIN_100R 0x03 // the least gain
#define I_GAIN_AUTO 0x04
/** ADC Vin gain level **/
#define VIN_GAIN_1M 0x00
#define VIN_GAIN_30K 0x01
#define VIN_GAIN_1K 0x02
#define VIN_GAIN_AUTO 0x03
/** Vout gain level **/
#define VOUT_GAIN_240K 0x00
#define VOUT_GAIN_15K 0x01
#define VOUT_GAIN_AUTO 0x02
/* DAC reset parameter */
#define DAC_ZERO 25000
// Step time macro
#define STEPTIME_HALF_SEC 5000
#define STEPTIME_ONE_SEC 10000
#define STEPTIME_TWO_SEC 20000
} INSTRUCTION = {0};
/*********************************************************************
* @fn InitEliteInstruction
@@ -110,58 +176,120 @@ struct HEADSTAGE_INSTRUCTION {
* @return None.
*/
static void InitEliteInstruction(){
instru.chip_id = 0;
instru.eliteFxn = 0; //default is a null event
instru.VsetRateIndex = 0;
instru.VsetRate = 2;
instru.Vset = 0;
instru.VoltConstant = DAC_ZERO; //DAC_ZERO is about 0V
instru.directionInit = 1; //0:reverse 1:forward
instru.step = 0;
instru.Ve1 = DAC_ZERO;
instru.Ve2 = DAC_ZERO;
instru.Vinit = 0;
instru.Vmax = 0;
instru.Vmin = 0;
instru.notifyRateIndex = 100;
instru.sampleRate = 15;
instru.VoViSwitch = 0x01; //0:user see Vo 1: user see Vi
instru.AutoGainEnable = 1;
instru.VinAutoGainEnable = 1;
instru.VoutAutoGainEnable = 1;
instru.ADCGainLevel = I_GAIN_AUTO;
instru.VoutGainLevel = VOUT_GAIN_AUTO;
instru.VinADCGainLevel = VIN_GAIN_AUTO;
instru.notifyRate = STEPTIME_ONE_SEC;
instru.cycleNumber = 1;
instru.charge = 1; //0:discharge 1:charge
instru.constantCurrent = 0;
instru.Currentmax = 0;
instru.StepTime = STEPTIME_ONE_SEC;
instru.AdcChannel = 0;
INSTRUCTION.chip_id = 0;
INSTRUCTION.eliteFxn = 0; //default is a null event
INSTRUCTION.VsetRateIndex = 0;
INSTRUCTION.VsetRate = 2;
INSTRUCTION.Vset = 0;
INSTRUCTION.VoltConstant = DAC_ZERO; //DAC_ZERO is about 0V
INSTRUCTION.directionInit = 1; //0:reverse 1:forward
INSTRUCTION.step = 0;
INSTRUCTION.Ve1 = DAC_ZERO;
INSTRUCTION.Ve2 = DAC_ZERO;
INSTRUCTION.Vinit = 0;
INSTRUCTION.Vmax = 0;
INSTRUCTION.Vmin = 0;
INSTRUCTION.sampleRateIndex = 1;
INSTRUCTION.sampleRate = 100;
INSTRUCTION.VoViSwitch = 0x01; //0:user see Vo 1: user see Vi
INSTRUCTION.AutoGainEnable = 1;
INSTRUCTION.VinAutoGainEnable = 1;
INSTRUCTION.VoutAutoGainEnable = 1;
INSTRUCTION.ADCGainLevel = I_GAIN_AUTO;
INSTRUCTION.VoutGainLevel = VOUT_GAIN_AUTO;
INSTRUCTION.VinADCGainLevel = VIN_GAIN_AUTO;
INSTRUCTION.notifyRate = STEPTIME_ONE_SEC;
INSTRUCTION.cycleNumber = 1;
INSTRUCTION.charge = 1; //0:discharge 1:charge
INSTRUCTION.constantCurrent = 0;
INSTRUCTION.Currentmax = 0;
INSTRUCTION.StepTime = STEPTIME_ONE_SEC;
INSTRUCTION.AdcChannel = 0;
//pulse mode
instru.sti_t1 = 0;
instru.sti_t2 = 0;
instru.sti_t3 = 0;
instru.sti_t4 = 0;
instru.sti_t5 = 0;
instru.sti_t6 = 0;
instru.sti_t7 = 0;
instru.sti_v1 = DAC_ZERO;
instru.sti_v2 = DAC_ZERO;
instru.sti_v3 = DAC_ZERO;
instru.sti_v4 = DAC_ZERO;
instru.sti_v5 = DAC_ZERO;
instru.sti_v6 = DAC_ZERO;
instru.sti_v7 = DAC_ZERO;
instru.sti_loop = 1;
instru.sti_cy = 0;
}
INSTRUCTION.sti_t1 = 0;
INSTRUCTION.sti_t2 = 0;
INSTRUCTION.sti_t3 = 0;
INSTRUCTION.sti_t4 = 0;
INSTRUCTION.sti_t5 = 0;
INSTRUCTION.sti_t6 = 0;
INSTRUCTION.sti_t7 = 0;
INSTRUCTION.sti_v1 = DAC_ZERO;
INSTRUCTION.sti_v2 = DAC_ZERO;
INSTRUCTION.sti_v3 = DAC_ZERO;
INSTRUCTION.sti_v4 = DAC_ZERO;
INSTRUCTION.sti_v5 = DAC_ZERO;
INSTRUCTION.sti_v6 = DAC_ZERO;
INSTRUCTION.sti_v7 = DAC_ZERO;
INSTRUCTION.sti_loop = 1;
INSTRUCTION.sti_cy = 0;
#ifdef __cpulsplus
INSTRUCTION.ledG_sw1 = false;
INSTRUCTION.ledG_sw2 = false;
INSTRUCTION.ledG_sw3 = false;
INSTRUCTION.ledG_sw4 = false;
INSTRUCTION.ledG_sw5 = false;
INSTRUCTION.ledG_sw6 = false;
INSTRUCTION.ledG_sw7 = false;
INSTRUCTION.ledG_t1 = 0;
INSTRUCTION.ledG_t2 = 0;
INSTRUCTION.ledG_t3 = 0;
INSTRUCTION.ledG_t4 = 0;
INSTRUCTION.ledG_t5 = 0;
INSTRUCTION.ledG_t6 = 0;
INSTRUCTION.ledG_t7 = 0;
INSTRUCTION.ledG_cy = 0;
INSTRUCTION.ledG_loop = 0;
INSTRUCTION.ledR_sw1 = false;
INSTRUCTION.ledR_sw2 = false;
INSTRUCTION.ledR_sw3 = false;
INSTRUCTION.ledR_sw4 = false;
INSTRUCTION.ledR_sw5 = false;
INSTRUCTION.ledR_sw6 = false;
INSTRUCTION.ledR_sw7 = false;
INSTRUCTION.ledR_t1 = 0;
INSTRUCTION.ledR_t2 = 0;
INSTRUCTION.ledR_t3 = 0;
INSTRUCTION.ledR_t4 = 0;
INSTRUCTION.ledR_t5 = 0;
INSTRUCTION.ledR_t6 = 0;
INSTRUCTION.ledR_t7 = 0;
INSTRUCTION.ledR_cy = 0;
INSTRUCTION.ledR_loop = 0;
INSTRUCTION.gas0_sw1 = false;
INSTRUCTION.gas0_sw2 = false;
INSTRUCTION.gas0_sw3 = false;
INSTRUCTION.gas0_sw4 = false;
INSTRUCTION.gas0_sw5 = false;
INSTRUCTION.gas0_sw6 = false;
INSTRUCTION.gas0_sw7 = false;
INSTRUCTION.gas0_t1 = 0;
INSTRUCTION.gas0_t2 = 0;
INSTRUCTION.gas0_t3 = 0;
INSTRUCTION.gas0_t4 = 0;
INSTRUCTION.gas0_t5 = 0;
INSTRUCTION.gas0_t6 = 0;
INSTRUCTION.gas0_t7 = 0;
INSTRUCTION.gas0_cy = 0;
INSTRUCTION.gas0_loop = 0;
INSTRUCTION.gas1_sw1 = false;
INSTRUCTION.gas1_sw2 = false;
INSTRUCTION.gas1_sw3 = false;
INSTRUCTION.gas1_sw4 = false;
INSTRUCTION.gas1_sw5 = false;
INSTRUCTION.gas1_sw6 = false;
INSTRUCTION.gas1_sw7 = false;
INSTRUCTION.gas1_t1 = 0;
INSTRUCTION.gas1_t2 = 0;
INSTRUCTION.gas1_t3 = 0;
INSTRUCTION.gas1_t4 = 0;
INSTRUCTION.gas1_t5 = 0;
INSTRUCTION.gas1_t6 = 0;
INSTRUCTION.gas1_t7 = 0;
INSTRUCTION.gas1_cy = 0;
INSTRUCTION.gas1_loop = 0;
}
#endif
#endif
@@ -50,14 +50,14 @@ static void EliteKeyPress(uint8_t key) {
}
ShutDownCounter ++;
} else {
if (OriginEliteFxn == instru.eliteFxn) { // old function == currunt instruction
if (OriginEliteFxn == INSTRUCTION.eliteFxn) { // old function == currunt instruction
if (ShutDownCounter != 0) {
// dark LED
checkFlafLED();
ShutDownCounter = 0;
}
} else { // old function != currunt instruction
OriginEliteFxn = instru.eliteFxn;
OriginEliteFxn = INSTRUCTION.eliteFxn;
if (ShutDownCounter != 0) {
ShutDownCounter = 0;
}
@@ -19,20 +19,21 @@ static void LED_color(uint8_t bright, uint8_t red, uint8_t green, uint8_t blue)
spi_LEDtxbuf[SPI_LED_SIZE - 1] = 0xffff;
LED_SPI(SPI_LED_SIZE, spi_LEDtxbuf, spi_LEDrxbuf);
}
static void Elite_led_color(uint16_t color){
switch (color) {
case COLOR_RED: {
LED_color(DARKLED, 0xFF, 0x00, 0x00);
LED_color(DARKLED, 0x50, 0x00, 0x00);
break;
}
case COLOR_ORANGE: {
LED_color(DARKLED, 0xFF, 0x58, 0x09);
LED_color(DARKLED, 0x50, 0x58, 0x09);
break;
}
case COLOR_YELLOW: {
LED_color(LIGHTLED, 0xFF, 0x80, 0x00);
LED_color(LIGHTLED, 0x50, 0x80, 0x00);
break;
}
case COLOR_GREEN: {
@@ -52,42 +53,21 @@ static void Elite_led_color(uint16_t color){
break;
}
case COLOR_MAGENTA: {
LED_color(DARKLED, 0xFF, 0x00, 0x80);
LED_color(DARKLED, 0x50, 0x00, 0x80);
break;
}
case COLOR_PURPLE: {
LED_color(DARKLED, 0xFF, 0x00, 0xFF);
LED_color(DARKLED, 0x50, 0x00, 0xFF);
break;
}
case COLOR_WHITE: {
LED_color(DARKLED, 0xCA, 0xFF, 0xFF);
LED_color(DARKLED, 0x50, 0xFF, 0xFF);
break;
}
case COLOR_BLACK: {
LED_color(0x00, 0x00, 0x00, 0x00);
break;
}
//dark LED
case COLOR_YELLOW_DARK: {
LED_color(DARKLED, 0xFF, 0x80, 0x00);
break;
}
case COLOR_GREEN_DARK: {
LED_color(DARKLED, 0x00, 0x33, 0x00);
break;
}
case COLOR_BLUE_DARK: {
LED_color(DARKLED, 0x00, 0x00, 0x33);
break;
}
case COLOR_CYAN_DARK: {
LED_color(DARKLED, 0x00, 0x10, 0x10);
break;
}
case COLOR_PURPLE_DARK: {
LED_color(DARKLED, 0x55, 0x00, 0x55);
break;
}
default: {
break;
}
@@ -153,35 +133,35 @@ static void checkFlafLED() {
}
static void WorkModeLED() {
switch (instru.eliteFxn) {
case CURVE_IV:
case CURVE_IV_CY:
switch (INSTRUCTION.eliteFxn) {
case IV_CURVE:
case CV_CURVE:
case DIFFERENTIAL_PULSE_VOLTAMMETRY:
case SQUARE_WAVE_VOLTAMMETRY:
case CURVE_VO:
case CURVE_RT:
case CURVE_VT:
case CURVE_IT:
case CURVE_CALI_ADCTEST:
case CURVE_CV:
case CURVE_LSV:
case CURVE_CA:{
case VOLT_OUTPUT:
case ZT_CURVE:
case VT_CURVE:
case IT_CURVE:
case ADC_TEST:
case CYCLIC_VOLTAMMETRY:
case LINEAR_SWEEP_VOLTAMMETRY:
case CONSTANT_VSCAN:{
WORKLED();
break;
}
case CURVE_PULSE:{
case PULSE_MODE:{
// Elite_led_color(COLOR_YELLOW);
WORKLED();
break;
}
case CURVE_CC:{
case CONSTANT_CURRENT:{
WORKLED();
break;
}
case CURVE_CALI_ADC:{
if(instru.AdcChannel == IIN_ADC){
case CALI_ADC_MODE:{
if(INSTRUCTION.AdcChannel == IIN_ADC){
Elite_led_color(COLOR_RED);
}else if(instru.AdcChannel == VIN_ADC){
}else if(INSTRUCTION.AdcChannel == VIN_ADC){
Elite_led_color(COLOR_ORANGE);
}
@@ -1,79 +1,97 @@
#ifndef ELITELSV
#define ELITELSV
#define Vset instru.Vset
#define Vset INSTRUCTION.Vset
static void lsv_volt_out(void)
{
struct wm_lsv_ctx_t *lsv = (struct wm_lsv_ctx_t *)wm_get();
struct wm_meas_t *m = &lsv->measure;
uint16_t DACOutCode;
int32_t Vin;
int32_t Vout;
int32_t DeltaVout;
static uint16_t LSVCurve(LSVMode *LSV){
static uint16_t DACOutCode;
static int32_t Vin;
static int32_t Vout;
static int32_t DeltaVout;
Vin = m->_measureVin * 200;//[5nV]
if (DACReset) {
Vin = LSV->_measureVin * 200;//[5nV]
if(DACReset){
Vout = Vset + Vin;
} else {
DACReset = false;
}else{
DeltaVout = Vset - (Vout - Vin);
Vout = Vout + DeltaVout;
}
instru.VoltConstant = Vout / 40000 + 25000;//5nV=>usercode
DACOutCode = Usercode_Correction_to_DAC(instru.VoutGainLevel, instru.VoltConstant);
INSTRUCTION.VoltConstant = Vout / 40000 + 25000;//5nV=>usercode
DACOutCode = Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, INSTRUCTION.VoltConstant);
int32_t RealV2;
RealV2 = (int32_t)((Vout - Vin) / 200);//[1uV]
InputNotify(NOTIFY_VOLT, RealV2);
// int32_t RealV;
// RealV = (int32_t)(Vout / 200);//[1uV]
// InputNotify(NOTIFY_IMPEDANCE, RealV);
int32_t RealV;
RealV = (int32_t)(Vout / 200);//[1uV]
InputNotify(NOTIFY_IMPEDANCE, RealV);
DAC_outputV(DACOutCode);
return;
//
return DACOutCode;
}
static void lsv_vscan(void)
{
struct wm_lsv_ctx_t *lsv = (struct wm_lsv_ctx_t *)wm_get();
static void LSV_Vscan(LSVMode *LSV){
NotifyCycleNumber = (instru.cycleNumber - lsv->_cycleNumber + 1);
NotifyCycleNumber = (INSTRUCTION.cycleNumber - LSV->_cycleNumber + 1);
if (vscanReset) {
if (instru.directionInit == 1) {
lsv->_direction_up = true;
lsv->_current_direction_up = true;
} else {
lsv->_direction_up = false;
lsv->_current_direction_up = false;
if(vscanReset){
if(INSTRUCTION.directionInit == 1){
LSV->_direction_up = true;
LSV->_current_direction_up = true;
}else{
LSV->_direction_up = false;
LSV->_current_direction_up = false;
}
//Vsetp = x * 20 * N, x=xmV ; N=VscanRate
if (instru.step <= 10) {
lsv->_Vstep = instru.step * instru.VsetRate / 5;
} else {
lsv->_Vstep = instru.step / 5 * instru.VsetRate;
if(INSTRUCTION.step <= 10){
LSV->_Vstep = INSTRUCTION.step * INSTRUCTION.VsetRate / 5;
}else{
LSV->_Vstep = INSTRUCTION.step / 5 * INSTRUCTION.VsetRate;
}
Vset = lsv->_Vinit;
Vset = LSV->_Vinit;
}
if (!vscanReset) {
if(!vscanReset){
if (lsv->_current_direction_up) {
Vset = Vset + lsv->_Vstep * GPT.GptimerMultiple;
} else {
Vset = Vset - lsv->_Vstep * GPT.GptimerMultiple;
if (LSV->_current_direction_up){
Vset = Vset + LSV->_Vstep * GPT.GptimerMultiple;
}else{
Vset = Vset - LSV->_Vstep * GPT.GptimerMultiple;
}
/*stop condition*/
if (Vset >= lsv->_Vmax) {
PeriodicEvent = false;
} else if (Vset <= lsv->_Vmin) {
PeriodicEvent = false;
if (Vset >= LSV->_Vmax){
ModeLED(POST_WORK);
// PeriodicEvent = false;
Vset = LSV->_Vmin;
InitEliteFlag();
INSTRUCTION.eliteFxn = CONSTANT_CURRENT;
INSTRUCTION.sampleRate = 15;
INSTRUCTION.charge = 0x01;
INSTRUCTION.constantCurrent = 0x00;
INSTRUCTION.Vmax = 0xC350;
INSTRUCTION.Vmin = 0x0000;
INSTRUCTION.notifyRate = 500;
INSTRUCTION.VoViSwitch = 0x02;//read Vscan = Vout - Vin
}else if (Vset <= LSV->_Vmin){
ModeLED(POST_WORK);
// PeriodicEvent = false;
Vset = LSV->_Vmax;
InitEliteFlag();
INSTRUCTION.eliteFxn = CONSTANT_CURRENT;
INSTRUCTION.sampleRate = 15;
INSTRUCTION.charge = 0x01;
INSTRUCTION.constantCurrent = 0x00;
INSTRUCTION.Vmax = 0xC350;
INSTRUCTION.Vmin = 0x0000;
INSTRUCTION.notifyRate = 500;
INSTRUCTION.VoViSwitch = 0x02;//read Vscan = Vout - Vin
}
}
}
@@ -29,7 +29,6 @@ static uint8_t NotifyVolt[4] = {0};
static uint8_t NotifyImpedance[4] = {0};
static uint8_t NotifyVoltBat[4] = {0};
static uint16_t NotifyCycleNumber = 0;
static uint8_t finishMode = 0;
// ****************** New Notify Format ******************************** //
/*
@@ -90,7 +89,7 @@ static uint8_t finishMode = 0;
static void SendNotify() {
initDATBuf();
not_buf[0] = instru.chip_id;
not_buf[0] = INSTRUCTION.chip_id;
for (int i = 0; i < 4; i++) {
not_buf[i + 1] = NotifyCurrent[i];
@@ -109,9 +108,7 @@ static void SendNotify() {
not_buf[17] = (NotifyCycleNumber >> 8) & 0xff;
not_buf[18] = NotifyCycleNumber & 0xff;
not_buf[19] = (finishMode << 7) & 0x80;
for (int i = 20; i < BLE_DAT_BUFF_SIZE; i++){
for (int i = 19; i < BLE_DAT_BUFF_SIZE; i++){
not_buf[i] = 0;
}
@@ -139,7 +136,6 @@ static void initCISBuf(){
static void initRawDataBuf(){
not_time_stamp = 0;
NotifyCycleNumber = 0;
finishMode = 0;
for (int i = 0; i < 4; i++){
NotifyCurrent[i] = 0;
@@ -152,7 +148,7 @@ static void FlushNotify(){
initRawDataBuf();
initDATBuf();
not_buf[0] = instru.chip_id;
not_buf[0] = INSTRUCTION.chip_id;
SimpleProfile_SetParameter(BLE_DAT_BUFF_CHAR, BLE_DAT_BUFF_SIZE, not_buf);
}
@@ -1,115 +1,528 @@
#ifndef ELITEPULSE
#define ELITEPULSE
#define Vset instru.Vset
#define Vset INSTRUCTION.Vset
static void pulse_vscan(void)
static void PULSE_Vscan(PULSEMode *PULSE)
{
struct wm_pulse_ctx_t *pulse = (struct wm_pulse_ctx_t *)wm_get();
static uint16_t lastVolt;
static uint16_t testV;
if (stiFirstTime) {
stiFirstTime = false;
lastVolt = 25000;
pulse->_sti_t_flag = 1;
pulse->_sti_v = pulse->_sti_v1;
pulse->_sti_t = pulse->_sti_t1;
if (pulse->_sti_t == 1) {
pulse->_sti_v = lastVolt;
PULSE->_sti_t_flag = 1;
PULSE->_sti_v = PULSE->_sti_v1;
PULSE->_sti_t = PULSE->_sti_t1;
if (PULSE->_sti_t == 1) {
PULSE->_sti_v = lastVolt;
}
} else if(!stiFirstTime) {
if (GPT.StiCounter >= pulse->_sti_t) {
GPT.StiCounter -= pulse->_sti_t; //to get right time
if (GPT.StiCounter >= PULSE->_sti_t) {
GPT.StiCounter -= PULSE->_sti_t; //to get right time
if (pulse->_sti_lp > 0) {
if (pulse->_sti_cy > 0) {
if (pulse->_sti_t_flag == 1) {
pulse->_sti_t_flag = 2;
pulse->_sti_v = pulse->_sti_v2;
pulse->_sti_t = pulse->_sti_t2;
if (pulse->_sti_t == 1) {
pulse->_sti_v = lastVolt;
if (PULSE->_sti_lp > 0) {
if (PULSE->_sti_cy > 0) {
if (PULSE->_sti_t_flag == 1) {
PULSE->_sti_t_flag = 2;
PULSE->_sti_v = PULSE->_sti_v2;
PULSE->_sti_t = PULSE->_sti_t2;
if (PULSE->_sti_t == 1) {
PULSE->_sti_v = lastVolt;
}
} else if (pulse->_sti_t_flag == 2) {
pulse->_sti_t_flag = 3;
pulse->_sti_v = pulse->_sti_v3;
pulse->_sti_t = pulse->_sti_t3;
if (pulse->_sti_t == 1) {
pulse->_sti_v = lastVolt;
} else if (PULSE->_sti_t_flag == 2) {
PULSE->_sti_t_flag = 3;
PULSE->_sti_v = PULSE->_sti_v3;
PULSE->_sti_t = PULSE->_sti_t3;
if (PULSE->_sti_t == 1) {
PULSE->_sti_v = lastVolt;
}
} else if (pulse->_sti_t_flag == 3) {
pulse->_sti_cy -- ;
if (pulse->_sti_cy == 0) {
pulse->_sti_t_flag = 4;
pulse->_sti_v = pulse->_sti_v4;
pulse->_sti_t = pulse->_sti_t4;
if (pulse->_sti_t == 1) {
pulse->_sti_v = lastVolt;
} else if (PULSE->_sti_t_flag == 3) {
PULSE->_sti_cy -- ;
if (PULSE->_sti_cy == 0) {
PULSE->_sti_t_flag = 4;
PULSE->_sti_v = PULSE->_sti_v4;
PULSE->_sti_t = PULSE->_sti_t4;
if (PULSE->_sti_t == 1) {
PULSE->_sti_v = lastVolt;
}
} else {
pulse->_sti_t_flag = 2;
pulse->_sti_v = pulse->_sti_v2;
pulse->_sti_t = pulse->_sti_t2;
if (pulse->_sti_t == 1) {
pulse->_sti_v = lastVolt;
PULSE->_sti_t_flag = 2;
PULSE->_sti_v = PULSE->_sti_v2;
PULSE->_sti_t = PULSE->_sti_t2;
if (PULSE->_sti_t == 1) {
PULSE->_sti_v = lastVolt;
}
}
}
} else if (pulse->_sti_cy <= 0){
if (pulse->_sti_t_flag == 4) {
pulse->_sti_lp -- ;
if (pulse->_sti_lp > 0) {
pulse->_sti_cy = instru.sti_cy;
pulse->_sti_t_flag = 2;
pulse->_sti_v = pulse->_sti_v2;
pulse->_sti_t = pulse->_sti_t2;
if (pulse->_sti_t == 1) {
pulse->_sti_v = lastVolt;
} else if (PULSE->_sti_cy <= 0){
if (PULSE->_sti_t_flag == 4) {
PULSE->_sti_lp -- ;
if (PULSE->_sti_lp > 0) {
PULSE->_sti_cy = INSTRUCTION.sti_cy;
PULSE->_sti_t_flag = 2;
PULSE->_sti_v = PULSE->_sti_v2;
PULSE->_sti_t = PULSE->_sti_t2;
if (PULSE->_sti_t == 1) {
PULSE->_sti_v = lastVolt;
}
} else {
pulse->_sti_t_flag = 5;
pulse->_sti_v = pulse->_sti_v5;
pulse->_sti_t = pulse->_sti_t5;
if (pulse->_sti_t == 1) {
pulse->_sti_v = lastVolt;
PULSE->_sti_t_flag = 5;
PULSE->_sti_v = PULSE->_sti_v5;
PULSE->_sti_t = PULSE->_sti_t5;
if (PULSE->_sti_t == 1) {
PULSE->_sti_v = lastVolt;
}
}
}
}
} else if (pulse->_sti_lp <= 0) {
if (pulse->_sti_t_flag == 5) {
pulse->_sti_t_flag = 6;
pulse->_sti_v = pulse->_sti_v6;
pulse->_sti_t = pulse->_sti_t6;
if (pulse->_sti_t == 1) {
pulse->_sti_v = lastVolt;
} else if (PULSE->_sti_lp <= 0) {
if (PULSE->_sti_t_flag == 5) {
PULSE->_sti_t_flag = 6;
PULSE->_sti_v = PULSE->_sti_v6;
PULSE->_sti_t = PULSE->_sti_t6;
if (PULSE->_sti_t == 1) {
PULSE->_sti_v = lastVolt;
}
} else if (pulse->_sti_t_flag == 6) {
pulse->_sti_t_flag = 7;
pulse->_sti_v = pulse->_sti_v7;
pulse->_sti_t = pulse->_sti_t7;
if (pulse->_sti_t == 1) {
pulse->_sti_v = lastVolt;
} else if (PULSE->_sti_t_flag == 6) {
PULSE->_sti_t_flag = 7;
PULSE->_sti_v = PULSE->_sti_v7;
PULSE->_sti_t = PULSE->_sti_t7;
if (PULSE->_sti_t == 1) {
PULSE->_sti_v = lastVolt;
}
} else if (pulse->_sti_t_flag == 7) {
pulse->_sti_v = 25000;
} else if (PULSE->_sti_t_flag == 7) {
PULSE->_sti_v = 25000;
PeriodicEvent = false;
PIN15_setOutputValue(HIGH_Z_MODE, 0); // 0: open highz;
megaTrigEnable = false;
ModeLED(NO_EVENT);
}
}
}
}
if (lastVolt != pulse->_sti_v) {
lastVolt = pulse->_sti_v;
//if (pulse->_sti_v == 25000) {
//InputNotify(NOTIFY_IMPEDANCE, testV);
if (lastVolt != PULSE->_sti_v) {
lastVolt = PULSE->_sti_v;
//if (PULSE->_sti_v == 25000) {
// PIN15_setOutputValue(HIGH_Z_MODE, 0); // 1 => close high_z mode
//} else {
// PIN15_setOutputValue(HIGH_Z_MODE, 1); // 1 => close high_z mode
//}
DAC_outputV(Usercode_Correction_to_DAC(VOUT_GAIN_240K, pulse->_sti_v));
DAC_outputV(Usercode_Correction_to_DAC(VOUT_GAIN_240K, pulse->_sti_v));
DAC_outputV(Usercode_Correction_to_DAC(VOUT_GAIN_240K, PULSE->_sti_v));
DAC_outputV(Usercode_Correction_to_DAC(VOUT_GAIN_240K, PULSE->_sti_v));
}
}
static void PULSE_ledG(PULSEMode *PULSE)
{
static bool lastSwitch;
if (ledGFirstTime) {
ledGFirstTime = false;
lastSwitch = false;
PULSE->_ledG_t_flag = 1;
PULSE->_ledG_sw = PULSE->_ledG_sw1;
PULSE->_ledG_t = PULSE->_ledG_t1;
if (PULSE->_ledG_t == 1) {
PULSE->_ledG_sw = lastSwitch;
}
} else if(!ledGFirstTime) {
if (GPT.LedGCounter >= PULSE->_ledG_t) {
GPT.LedGCounter -= PULSE->_ledG_t; //to get right time
if (PULSE->_ledG_lp > 0) {
if (PULSE->_ledG_cy > 0) {
if (PULSE->_ledG_t_flag == 1) {
PULSE->_ledG_t_flag = 2;
PULSE->_ledG_sw = PULSE->_ledG_sw2;
PULSE->_ledG_t = PULSE->_ledG_t2;
if (PULSE->_ledG_t == 1) {
PULSE->_ledG_sw = lastSwitch;
}
} else if (PULSE->_ledG_t_flag == 2) {
PULSE->_ledG_t_flag = 3;
PULSE->_ledG_sw = PULSE->_ledG_sw3;
PULSE->_ledG_t = PULSE->_ledG_t3;
if (PULSE->_ledG_t == 1) {
PULSE->_ledG_sw = lastSwitch;
}
} else if (PULSE->_ledG_t_flag == 3) {
PULSE->_ledG_cy -- ;
if (PULSE->_ledG_cy == 0) {
PULSE->_ledG_t_flag = 4;
PULSE->_ledG_sw = PULSE->_ledG_sw4;
PULSE->_ledG_t = PULSE->_ledG_t4;
if (PULSE->_ledG_t == 1) {
PULSE->_ledG_sw = lastSwitch;
}
} else {
PULSE->_ledG_t_flag = 2;
PULSE->_ledG_sw = PULSE->_ledG_sw2;
PULSE->_ledG_t = PULSE->_ledG_t2;
if (PULSE->_ledG_t == 1) {
PULSE->_ledG_sw = lastSwitch;
}
}
}
} else if (PULSE->_ledG_cy <= 0){
if (PULSE->_ledG_t_flag == 4) {
PULSE->_ledG_lp -- ;
if (PULSE->_ledG_lp > 0) {
PULSE->_ledG_cy = INSTRUCTION.ledG_cy;
PULSE->_ledG_t_flag = 2;
PULSE->_ledG_sw = PULSE->_ledG_sw2;
PULSE->_ledG_t = PULSE->_ledG_t2;
if (PULSE->_ledG_t == 1) {
PULSE->_ledG_sw = lastSwitch;
}
} else {
PULSE->_ledG_t_flag = 5;
PULSE->_ledG_sw = PULSE->_ledG_sw5;
PULSE->_ledG_t = PULSE->_ledG_t5;
if (PULSE->_ledG_t == 1) {
PULSE->_ledG_sw = lastSwitch;
}
}
}
}
} else if (PULSE->_ledG_lp <= 0) {
if (PULSE->_ledG_t_flag == 5) {
PULSE->_ledG_t_flag = 6;
PULSE->_ledG_sw = PULSE->_ledG_sw6;
PULSE->_ledG_t = PULSE->_ledG_t6;
if (PULSE->_ledG_t == 1) {
PULSE->_ledG_sw = lastSwitch;
}
} else if (PULSE->_ledG_t_flag == 6) {
PULSE->_ledG_t_flag = 7;
PULSE->_ledG_sw = PULSE->_ledG_sw7;
PULSE->_ledG_t = PULSE->_ledG_t7;
if (PULSE->_ledG_t == 1) {
PULSE->_ledG_sw = lastSwitch;
}
} else if (PULSE->_ledG_t_flag == 7) {
PULSE->_ledG_sw = false;
//PeriodicEvent = false;
//megaTrigEnable = false;
//ModeLED(NO_EVENT);
}
}
}
}
if (lastSwitch != PULSE->_ledG_sw) {
lastSwitch = PULSE->_ledG_sw;
PIN15_setOutputValue(MEGA_G_LED, PULSE->_ledG_sw);
}
}
static void PULSE_ledR(PULSEMode *PULSE)
{
static bool lastSwitch;
if (ledRFirstTime) {
ledRFirstTime = false;
lastSwitch = false;
PULSE->_ledR_t_flag = 1;
PULSE->_ledR_sw = PULSE->_ledR_sw1;
PULSE->_ledR_t = PULSE->_ledR_t1;
if (PULSE->_ledR_t == 1) {
PULSE->_ledR_sw = lastSwitch;
}
} else if(!ledRFirstTime) {
if (GPT.LedRCounter >= PULSE->_ledR_t) {
GPT.LedRCounter -= PULSE->_ledR_t; //to get right time
if (PULSE->_ledR_lp > 0) {
if (PULSE->_ledR_cy > 0) {
if (PULSE->_ledR_t_flag == 1) {
PULSE->_ledR_t_flag = 2;
PULSE->_ledR_sw = PULSE->_ledR_sw2;
PULSE->_ledR_t = PULSE->_ledR_t2;
if (PULSE->_ledR_t == 1) {
PULSE->_ledR_sw = lastSwitch;
}
} else if (PULSE->_ledR_t_flag == 2) {
PULSE->_ledR_t_flag = 3;
PULSE->_ledR_sw = PULSE->_ledR_sw3;
PULSE->_ledR_t = PULSE->_ledR_t3;
if (PULSE->_ledR_t == 1) {
PULSE->_ledR_sw = lastSwitch;
}
} else if (PULSE->_ledR_t_flag == 3) {
PULSE->_ledR_cy -- ;
if (PULSE->_ledR_cy == 0) {
PULSE->_ledR_t_flag = 4;
PULSE->_ledR_sw = PULSE->_ledR_sw4;
PULSE->_ledR_t = PULSE->_ledR_t4;
if (PULSE->_ledR_t == 1) {
PULSE->_ledR_sw = lastSwitch;
}
} else {
PULSE->_ledR_t_flag = 2;
PULSE->_ledR_sw = PULSE->_ledR_sw2;
PULSE->_ledR_t = PULSE->_ledR_t2;
if (PULSE->_ledR_t == 1) {
PULSE->_ledR_sw = lastSwitch;
}
}
}
} else if (PULSE->_ledR_cy <= 0){
if (PULSE->_ledR_t_flag == 4) {
PULSE->_ledR_lp -- ;
if (PULSE->_ledR_lp > 0) {
PULSE->_ledR_cy = INSTRUCTION.ledR_cy;
PULSE->_ledR_t_flag = 2;
PULSE->_ledR_sw = PULSE->_ledR_sw2;
PULSE->_ledR_t = PULSE->_ledR_t2;
if (PULSE->_ledR_t == 1) {
PULSE->_ledR_sw = lastSwitch;
}
} else {
PULSE->_ledR_t_flag = 5;
PULSE->_ledR_sw = PULSE->_ledR_sw5;
PULSE->_ledR_t = PULSE->_ledR_t5;
if (PULSE->_ledR_t == 1) {
PULSE->_ledR_sw = lastSwitch;
}
}
}
}
} else if (PULSE->_ledR_lp <= 0) {
if (PULSE->_ledR_t_flag == 5) {
PULSE->_ledR_t_flag = 6;
PULSE->_ledR_sw = PULSE->_ledR_sw6;
PULSE->_ledR_t = PULSE->_ledR_t6;
if (PULSE->_ledR_t == 1) {
PULSE->_ledR_sw = lastSwitch;
}
} else if (PULSE->_ledR_t_flag == 6) {
PULSE->_ledR_t_flag = 7;
PULSE->_ledR_sw = PULSE->_ledR_sw7;
PULSE->_ledR_t = PULSE->_ledR_t7;
if (PULSE->_ledR_t == 1) {
PULSE->_ledR_sw = lastSwitch;
}
} else if (PULSE->_ledR_t_flag == 7) {
PULSE->_ledR_sw = false;
//PeriodicEvent = false;
//megaTrigEnable = false;
//ModeLED(NO_EVENT);
}
}
}
}
if (lastSwitch != PULSE->_ledR_sw) {
lastSwitch = PULSE->_ledR_sw;
PIN15_setOutputValue(MEGA_R_LED, PULSE->_ledR_sw);
}
}
static void PULSE_gas0(PULSEMode *PULSE)
{
static bool lastSwitch;
if (gas0FirstTime) {
gas0FirstTime = false;
lastSwitch = false;
PULSE->_gas0_t_flag = 1;
PULSE->_gas0_sw = PULSE->_gas0_sw1;
PULSE->_gas0_t = PULSE->_gas0_t1;
if (PULSE->_gas0_t == 1) {
PULSE->_gas0_sw = lastSwitch;
}
} else if(!gas0FirstTime) {
if (GPT.Gas0Counter >= PULSE->_gas0_t) {
GPT.Gas0Counter -= PULSE->_gas0_t; //to get right time
if (PULSE->_gas0_lp > 0) {
if (PULSE->_gas0_cy > 0) {
if (PULSE->_gas0_t_flag == 1) {
PULSE->_gas0_t_flag = 2;
PULSE->_gas0_sw = PULSE->_gas0_sw2;
PULSE->_gas0_t = PULSE->_gas0_t2;
if (PULSE->_gas0_t == 1) {
PULSE->_gas0_sw = lastSwitch;
}
} else if (PULSE->_gas0_t_flag == 2) {
PULSE->_gas0_t_flag = 3;
PULSE->_gas0_sw = PULSE->_gas0_sw3;
PULSE->_gas0_t = PULSE->_gas0_t3;
if (PULSE->_gas0_t == 1) {
PULSE->_gas0_sw = lastSwitch;
}
} else if (PULSE->_gas0_t_flag == 3) {
PULSE->_gas0_cy -- ;
if (PULSE->_gas0_cy == 0) {
PULSE->_gas0_t_flag = 4;
PULSE->_gas0_sw = PULSE->_gas0_sw4;
PULSE->_gas0_t = PULSE->_gas0_t4;
if (PULSE->_gas0_t == 1) {
PULSE->_gas0_sw = lastSwitch;
}
} else {
PULSE->_gas0_t_flag = 2;
PULSE->_gas0_sw = PULSE->_gas0_sw2;
PULSE->_gas0_t = PULSE->_gas0_t2;
if (PULSE->_gas0_t == 1) {
PULSE->_gas0_sw = lastSwitch;
}
}
}
} else if (PULSE->_gas0_cy <= 0){
if (PULSE->_gas0_t_flag == 4) {
PULSE->_gas0_lp -- ;
if (PULSE->_gas0_lp > 0) {
PULSE->_gas0_cy = INSTRUCTION.gas0_cy;
PULSE->_gas0_t_flag = 2;
PULSE->_gas0_sw = PULSE->_gas0_sw2;
PULSE->_gas0_t = PULSE->_gas0_t2;
if (PULSE->_gas0_t == 1) {
PULSE->_gas0_sw = lastSwitch;
}
} else {
PULSE->_gas0_t_flag = 5;
PULSE->_gas0_sw = PULSE->_gas0_sw5;
PULSE->_gas0_t = PULSE->_gas0_t5;
if (PULSE->_gas0_t == 1) {
PULSE->_gas0_sw = lastSwitch;
}
}
}
}
} else if (PULSE->_gas0_lp <= 0) {
if (PULSE->_gas0_t_flag == 5) {
PULSE->_gas0_t_flag = 6;
PULSE->_gas0_sw = PULSE->_gas0_sw6;
PULSE->_gas0_t = PULSE->_gas0_t6;
if (PULSE->_gas0_t == 1) {
PULSE->_gas0_sw = lastSwitch;
}
} else if (PULSE->_gas0_t_flag == 6) {
PULSE->_gas0_t_flag = 7;
PULSE->_gas0_sw = PULSE->_gas0_sw7;
PULSE->_gas0_t = PULSE->_gas0_t7;
if (PULSE->_gas0_t == 1) {
PULSE->_gas0_sw = lastSwitch;
}
} else if (PULSE->_gas0_t_flag == 7) {
PULSE->_gas0_sw = false;
//PeriodicEvent = false;
//megaTrigEnable = false;
//ModeLED(NO_EVENT);
}
}
}
}
if (lastSwitch != PULSE->_gas0_sw) {
lastSwitch = PULSE->_gas0_sw;
PIN15_setOutputValue(MEGA_VAL_0, PULSE->_gas0_sw);
}
}
static void PULSE_gas1(PULSEMode *PULSE)
{
static bool lastSwitch;
if (gas1FirstTime) {
gas1FirstTime = false;
lastSwitch = true;
PULSE->_gas1_t_flag = 1;
PULSE->_gas1_sw = PULSE->_gas1_sw1;
PULSE->_gas1_t = PULSE->_gas1_t1;
if (PULSE->_gas1_t == 1) {
PULSE->_gas1_sw = lastSwitch;
}
} else if(!gas1FirstTime) {
if (GPT.Gas1Counter >= PULSE->_gas1_t) {
GPT.Gas1Counter -= PULSE->_gas1_t; //to get right time
if (PULSE->_gas1_lp > 0) {
if (PULSE->_gas1_cy > 0) {
if (PULSE->_gas1_t_flag == 1) {
PULSE->_gas1_t_flag = 2;
PULSE->_gas1_sw = PULSE->_gas1_sw2;
PULSE->_gas1_t = PULSE->_gas1_t2;
if (PULSE->_gas1_t == 1) {
PULSE->_gas1_sw = lastSwitch;
}
} else if (PULSE->_gas1_t_flag == 2) {
PULSE->_gas1_t_flag = 3;
PULSE->_gas1_sw = PULSE->_gas1_sw3;
PULSE->_gas1_t = PULSE->_gas1_t3;
if (PULSE->_gas1_t == 1) {
PULSE->_gas1_sw = lastSwitch;
}
} else if (PULSE->_gas1_t_flag == 3) {
PULSE->_gas1_cy -- ;
if (PULSE->_gas1_cy == 0) {
PULSE->_gas1_t_flag = 4;
PULSE->_gas1_sw = PULSE->_gas1_sw4;
PULSE->_gas1_t = PULSE->_gas1_t4;
if (PULSE->_gas1_t == 1) {
PULSE->_gas1_sw = lastSwitch;
}
} else {
PULSE->_gas1_t_flag = 2;
PULSE->_gas1_sw = PULSE->_gas1_sw2;
PULSE->_gas1_t = PULSE->_gas1_t2;
if (PULSE->_gas1_t == 1) {
PULSE->_gas1_sw = lastSwitch;
}
}
}
} else if (PULSE->_gas1_cy <= 0){
if (PULSE->_gas1_t_flag == 4) {
PULSE->_gas1_lp -- ;
if (PULSE->_gas1_lp > 0) {
PULSE->_gas1_cy = INSTRUCTION.gas1_cy;
PULSE->_gas1_t_flag = 2;
PULSE->_gas1_sw = PULSE->_gas1_sw2;
PULSE->_gas1_t = PULSE->_gas1_t2;
if (PULSE->_gas1_t == 1) {
PULSE->_gas1_sw = lastSwitch;
}
} else {
PULSE->_gas1_t_flag = 5;
PULSE->_gas1_sw = PULSE->_gas1_sw5;
PULSE->_gas1_t = PULSE->_gas1_t5;
if (PULSE->_gas1_t == 1) {
PULSE->_gas1_sw = lastSwitch;
}
}
}
}
} else if (PULSE->_gas1_lp <= 0) {
if (PULSE->_gas1_t_flag == 5) {
PULSE->_gas1_t_flag = 6;
PULSE->_gas1_sw = PULSE->_gas1_sw6;
PULSE->_gas1_t = PULSE->_gas1_t6;
if (PULSE->_gas1_t == 1) {
PULSE->_gas1_sw = lastSwitch;
}
} else if (PULSE->_gas1_t_flag == 6) {
PULSE->_gas1_t_flag = 7;
PULSE->_gas1_sw = PULSE->_gas1_sw7;
PULSE->_gas1_t = PULSE->_gas1_t7;
if (PULSE->_gas1_t == 1) {
PULSE->_gas1_sw = lastSwitch;
}
} else if (PULSE->_gas1_t_flag == 7) {
PULSE->_gas1_sw = true;
//PeriodicEvent = false;
//megaTrigEnable = false;
//ModeLED(NO_EVENT);
}
}
}
}
if (lastSwitch != PULSE->_gas1_sw) {
lastSwitch = PULSE->_gas1_sw;
PIN15_setOutputValue(MEGA_VAL_1, PULSE->_gas1_sw);
}
}
#endif
@@ -3,24 +3,35 @@
#define ELITERESET
static void reset() {
mode_init = true;
megaStiEnable = false;
PeriodicEvent = false; // is there an PeriodicEvent?
Free_Work_Mode = true; // Free(WorkModeData)
InitPeriodicEvent = true; // need to create a WorkModeData?
Mega_PeriodicEvent = false;
megaTrigEnable = false;
Mega_Trig_receive = false;
megaStiEnable = false;
megaLedGEnable = false;
megaLedREnable = false;
megaGas0Enable = false;
megaGas1Enable = false;
PIN15_setOutputValue(MEGA_G_LED, 0);
PIN15_setOutputValue(MEGA_R_LED, 0);
PIN15_setOutputValue(MEGA_VAL_0, 0);
PIN15_setOutputValue(MEGA_VAL_1, 1);
ModeLED(NO_EVENT);
InitEliteFlag();
InitFlag();
InitCT();
InitGPT();
initINSBuf();
initDATBuf();
PIN15_setOutputValue(HIGH_Z_MODE, 0); // HIGH Z MODE // 1: close; 0: open;
PIN15_setOutputValue(HIGH_Z_MODE, 0); // 0 => open high_z mode
VinADCGainControl(VIN_GAIN_AUTO);
IinADCGainControl(I_GAIN_AUTO);
instru.VoutGainLevel = VOUT_GAIN_15K;
VoutGainControl(instru.VoutGainLevel);
DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLevel, 25000));
INSTRUCTION.VoutGainLevel = VOUT_GAIN_15K;
VoutGainControl(INSTRUCTION.VoutGainLevel);
DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, 25000));
initINSBuf();
initDATBuf();
for (int i = 0; i < SPI_LED_SIZE; i++) {
spi_LEDtxbuf[i] = 0;
@@ -37,27 +48,37 @@ static void reset() {
spi_ADC_rxbuf[i] = 0;
}
ModeLED(NO_EVENT);
CPUdelay(1600);
}
static void Eliteinterrupt() {
mode_init = true;
megaStiEnable = false;
PeriodicEvent = false; // is there an PeriodicEvent?
Free_Work_Mode = true; // Free(WorkModeData)
InitPeriodicEvent = true; // need to create a WorkModeData?
Mega_PeriodicEvent = false;
Mega_Trig_receive = false;
megaTrigEnable = false;
megaStiEnable = false;
megaLedGEnable = false;
megaLedREnable = false;
megaGas0Enable = false;
megaGas1Enable = false;
PIN15_setOutputValue(MEGA_G_LED, 0);
PIN15_setOutputValue(MEGA_R_LED, 0);
PIN15_setOutputValue(MEGA_VAL_0, 0);
PIN15_setOutputValue(MEGA_VAL_1, 1);
ModeLED(NO_EVENT);
InitFlag();
InitEliteFlag();
InitCT();
InitGPT();
PIN15_setOutputValue(HIGH_Z_MODE, 0); // 0 => open high_z mode
INSTRUCTION.VoutGainLevel = VOUT_GAIN_15K;
VoutGainControl(INSTRUCTION.VoutGainLevel);
DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, 25000));
initINSBuf();
initDATBuf();
PIN15_setOutputValue(HIGH_Z_MODE, 0); // HIGH Z MODE // 1: close; 0: open;
instru.VoutGainLevel = VOUT_GAIN_15K;
VoutGainControl(instru.VoutGainLevel);
DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLevel, 25000));
for (int i = 0; i < SPI_LED_SIZE; i++) {
spi_LEDtxbuf[i] = 0;
spi_LEDrxbuf[i] = 0;
@@ -73,7 +94,6 @@ static void Eliteinterrupt() {
spi_ADC_rxbuf[i] = 0;
}
ModeLED(NO_EVENT);
CPUdelay(8000);
}
#endif
@@ -75,7 +75,7 @@ static void ADC_SPI(uint8_t length, uint8_t *spi_txbuf, uint8_t *spi_rxbuf) {
SPI_transfer(spiHandle1, &ADC_DAC_transaction);
PIN_setOutputValue(pin_handle, D6, 1); // ADC_CS HIGH
PIN_setOutputValue(pin_handle, D6, 1); // ADC_CS HOGH
update_latch_status (ADC_CS, 1);
// PIN15_setOutputValue(ADC_CS, 1); // ADC_CS HIGH
}
@@ -91,18 +91,13 @@ static void DAC_SPI(uint8_t length, uint8_t *spi_txbuf, uint8_t *spi_rxbuf) {
SPI_transfer(spiHandle1, &ADC_DAC_transaction);
PIN_setOutputValue(pin_handle, D7, 1); // DAC_CS HIGH
PIN_setOutputValue(pin_handle, D7, 1); // DAC_CS HOGH
update_latch_status (DAC_CS, 1);
// PIN15_setOutputValue(DAC_CS, 1); // DAC_CS HIGH
}
static void ELITE15_SPI_HOLD() {
Elite_SPI_init();
#ifdef ELITE_PIN_1_5_RE
PIN_setOutputValue(pin_handle, D6, LH.LATCH0[6]); // ADC_CS
PIN_setOutputValue(pin_handle, D7, LH.LATCH0[7]); // DAC_CS
PIN_setOutputValue(pin_handle, D4, LH.LATCH0[4]); // update HIGH_Z_MODE
#endif
PIN_setOutputValue(pin_handle, LOAD0, 1);
PIN_setOutputValue(pin_handle, LOAD1, 0);
@@ -8,16 +8,14 @@
// change the output voltage step
// => get a R-T curve (with resolution = 1 sample/volt step )
static void rt_vscan(void)
{
struct wm_rt_ctx_t *rt = (struct wm_rt_ctx_t *)wm_get();
if (vscanReset) {
Vset = rt->_Vinit;
static void ZT_Vscan(RTMode *RT){
if(vscanReset){
Vset = ((int32_t)(INSTRUCTION.VoltConstant) - 25000) * 4 * 10000; //[5nV]
OneWayVoltScan();
}
if(!vscanReset) {
Vset = rt->_Vinit;
if(!vscanReset){
}
}
#endif
@@ -6,8 +6,6 @@
#include <Board.h>
#include <ti/drivers/PIN.h>
#define ELITE_PIN_1_5
/* SPI Board */
#define Board_SPI0_MISO PIN_UNASSIGNED
#define Board_SPI0_MOSI D1
@@ -38,16 +36,8 @@
#define ADC_DAC_SPI_CLK LOAD0, D2
#define LED_MOSI LOAD0, D1
#define LED_CLK LOAD0, D0
#define MEM_CS LOAD0, D5
#ifdef ELITE_PIN_1_5
#define MEM_HOLD LOAD0, D4
#define HIGH_Z_MODE LOAD2, D5
#endif
#ifdef ELITE_PIN_1_5_RE
#define MEM_HOLD LOAD1, D0
#define HIGH_Z_MODE LOAD0, D4
#endif
#define MEM_CS LOAD0, D5
#define Turnon_I_MID LOAD2, D0
#define Turnon_I_SMALL LOAD2, D4
@@ -55,7 +45,6 @@
#define Turnon_V_SMALL LOAD2, D2
#define Turnon_V_MID LOAD2, D3
#define Turon_VOUT_SMALL LOAD2, D7
#define shutdown_6994 LOAD2, D6
//#define Turnon10K Turnon_I_MID
//#define Turnon200R Turnon_I_LARGE
@@ -66,10 +55,19 @@
#define Board_I2C0_SDA0 PIN_UNASSIGNED
#endif
#define shutdown_6994 LOAD2, D6
#define switch_on IOID_14
#define HIGH_Z_MODE LOAD2, D5
#define enable_10v LOAD1, D5
#define enable_5v LOAD1, D6
/* Megafly control */
#define MEGA_G_LED LOAD1, D0
#define MEGA_R_LED LOAD1, D1
#define MEGA_VAL_0 LOAD1, D2
#define MEGA_VAL_1 LOAD1, D3
#define MEGA_TRIG IOID_0
PIN_Handle pin_handle;
static PIN_State ZM_rst;
@@ -88,6 +86,7 @@ const PIN_Config BLE_IO[] = {
LOAD2 | PIN_GPIO_OUTPUT_EN | PIN_GPIO_LOW | PIN_PUSHPULL,
switch_on | PIN_INPUT_EN | PIN_PULLDOWN, // to sense switch
MEGA_TRIG | PIN_GPIO_OUTPUT_DIS | PIN_INPUT_EN | PIN_PULLDOWN,
PIN_TERMINATE
};
@@ -108,9 +107,13 @@ static void add_elite_pin() {
// }
}
static void megafly_trig_callback(PIN_Handle handle, PIN_Id pinId);
static void remove_elite_pin() {
PIN_close(pin_handle);
pin_handle = PIN_open(&ZM_rst, BLE_IO);
PIN_registerIntCb(pin_handle, megafly_trig_callback);
PIN_setInterrupt(pin_handle, MEGA_TRIG | PIN_IRQ_NEGEDGE);
}
/*!
@@ -42,7 +42,7 @@ static void headstage_battery_volt(){
static void EliteADCBattery(){
static uint8_t ADCSwitch = 0;
if(instru.eliteFxn == CURVE_CALI_ADCTEST){
if(INSTRUCTION.eliteFxn == ADC_TEST){
ADCSwitch = 0;
}else{
if(ADCSwitch == 0){ /**read V**/
@@ -20,37 +20,26 @@
#define VIS_CC_ZERO 0x40
// RIS (real instruction)
enum all_mode_e {
CURVE_IV = 0x01, // 01
CURVE_IV_CY = 0x02, // cycling iv // 02
CURVE_VO = 0x03, // 03
CURVE_RT = 0x04, // 04
CURVE_VT = 0x05, // 05
CURVE_IT = 0x06, // 06
CURVE_CC = 0x07, // constant current // 07
CURVE_CC_CY = 0x08, // doesn't exist // 08
CURVE_CV = 0x09, // cyclic voltammetry // 09
CURVE_CV_HIGH_CY = 0x0A, // cyclic voltammetry(high cycle) // 0A
CURVE_LSV = 0x0B, // linear sweep voltammetry // 0B
CURVE_CA = 0x0C, // chronoamperometric graph(CA) // 0C
CURVE_PULSE = 0x0D, // 0D
DIFFERENTIAL_PULSE_VOLTAMMETRY = 0x0E, // doesn't exist // 0E
SQUARE_WAVE_VOLTAMMETRY = 0x0F, // doesn't exist // 0F
SHORT_INSTR = 0xE0,
CURVE_CALI_ADCTEST = 0x91, // F0
CURVE_CALI_DAC = 0x93, // F1
CURVE_CALI_ADC = 0x92, // F2
DEV_MODE = 0xFF
};
enum all_short_instr_e {
SET_NOTIFY_RATE2 = 0x01, //01
SET_NOTIFY_RATE = 0x70, //01
SET_ADC_DAC_GAIN = 0x80, //02
};
#define IV_CURVE 0x10
#define CV_CURVE 0x20
#define VOLT_OUTPUT 0x30
#define ZT_CURVE 0x40
#define VT_CURVE 0x50
#define IT_CURVE 0x60
#define SET_SAMPLE_RATE 0x70
#define SET_ADC_DAC_GAIN 0x80
#define DIFFERENTIAL_PULSE_VOLTAMMETRY 0xA0
#define SQUARE_WAVE_VOLTAMMETRY 0xB0
#define CYCLIC_VOLTAMMETRY 0xC0
#define CONSTANT_CURRENT 0xD0
#define CYCLE_CONSTANT_CURRENT 0xF0
#define HIGH_CYCLE_CYCLIC_VOLTAMMETRY 0x01
#define LINEAR_SWEEP_VOLTAMMETRY 0x02
#define CONSTANT_VSCAN 0x03
#define ADC_TEST 0x91
#define CALI_DAC_MODE 0x93
#define CALI_ADC_MODE 0x92
#define PULSE_MODE 0x94
// CIS (control instruction)
#define CIS_VERSION 0x40
@@ -69,7 +58,19 @@ enum all_short_instr_e {
#define PARA_2 0x02
#define PARA_3 0x03
#define PARA_4 0x04
#define PARA_END 0x11
#define PARA_5 0x05
#define PARA_6 0x06
#define PARA_7 0x07
#define PARA_8 0x08
#define PARA_9 0x09
#define PARA_10 0x0A
#define PARA_11 0x0B
#define PARA_12 0x0C
#define PARA_13 0x0D
#define PARA_14 0x0E
#define PARA_15 0x0F
#define PARA_16 0x10
#define PARA_17 0x11
//Elite LED
#define COLOR_BLACK 0x00
@@ -83,12 +84,6 @@ enum all_short_instr_e {
#define COLOR_PURPLE 0x08
#define COLOR_WHITE 0x09
#define COLOR_YELLOWGREEN 0x0A
#define COLOR_YELLOW_DARK 0xF3
#define COLOR_GREEN_DARK 0xF4
#define COLOR_BLUE_DARK 0xF5
#define COLOR_CYAN_DARK 0xF6
#define COLOR_PURPLE_DARK 0xF8
#define LEDPowerON() Elite_led_color(COLOR_GREEN)
#define WORKLED() Elite_led_color(COLOR_CYAN)
#define KEYLED() Elite_led_color(COLOR_YELLOW)
@@ -101,5 +96,6 @@ enum all_short_instr_e {
#define WORKING 0x04
#define POST_WORK 0x05
#define MEGA_15V 41406
#define VALUE_ZERO_TO_ONE(_v) (_v == 0) ? 1 : _v
#endif
@@ -2,11 +2,11 @@
#ifndef VERSION_DATE
#define VERSION_DATE
#define VERSION_DATE_YEAR 21
#define VERSION_DATE_MONTH 4
#define VERSION_DATE_DAY 9
#define VERSION_DATE_HOUR 16
#define VERSION_DATE_MINUTE 23
#define VERSION_DATE_YEAR 20
#define VERSION_DATE_MONTH 12
#define VERSION_DATE_DAY 11
#define VERSION_DATE_HOUR 17
#define VERSION_DATE_MINUTE 20
// this is NOT the version hash !!
// it's the last version hash
@@ -129,16 +129,16 @@ static void update_ins_sti_channel(uint8_t *buf, uint8 sti_chp, uint8 sti_chn) {
static void update_ins_buffer() {
uint8 header = 0b10100000;
uint8 amp_gain = (instru.amp_gain & 0b11) << 3;
uint8 amp_lbf = instru.amp_low_band_freq & 0b111;
uint8 amp_gain = (INSTRUCTION.amp_gain & 0b11) << 3;
uint8 amp_lbf = INSTRUCTION.amp_low_band_freq & 0b111;
uint8 channel = 0; // should be call update_ins_channel to modify this value
uint8 chopper = (instru.chopper) ? 0b00001000 : 0;
uint8 fast_settle = (instru.fast_settle) ? 0b00000100 : 0;
uint8 sti_enable = (instru.work_mode != STI_MODE_DISABLE) ? 0b00000010 : 0;
uint8 sti_volt_l = (instru.sti_volt & 0b11111) >> 4;
uint8 sti_volt_h = (instru.sti_volt & 0b01111) << 4;
uint8 sti_chp = instru.sti_channel_pmos & 0b1111;
uint8 sti_chn = (instru.sti_channel_nmos & 0b1111) << 4;
uint8 chopper = (INSTRUCTION.chopper) ? 0b00001000 : 0;
uint8 fast_settle = (INSTRUCTION.fast_settle) ? 0b00000100 : 0;
uint8 sti_enable = (INSTRUCTION.work_mode != STI_MODE_DISABLE) ? 0b00000010 : 0;
uint8 sti_volt_l = (INSTRUCTION.sti_volt & 0b11111) >> 4;
uint8 sti_volt_h = (INSTRUCTION.sti_volt & 0b01111) << 4;
uint8 sti_chp = INSTRUCTION.sti_channel_pmos & 0b1111;
uint8 sti_chn = (INSTRUCTION.sti_channel_nmos & 0b1111) << 4;
uint8 clk_signal = 0; // should be call update_ins_clock to modify this value
spi_txbuf[0] = header | amp_gain | amp_lbf;
@@ -193,7 +193,7 @@ static bool update_ins_rec_buffer() {
* @param: buf: pointer of the SPI buffer.
*/
static void update_ins_sti_buffer() {
switch (instru.work_mode) {
switch (INSTRUCTION.work_mode) {
case STI_MODE_POS:
case STI_MODE_NEG:
// copy [4:7]
@@ -215,7 +215,7 @@ static void update_ins_sti_buffer() {
update_ins_sti_enable(spi_txbuf, TRUE);
// ins buf [4:7]
update_ins_sti_enable(spi_txbuf + 4, TRUE);
update_ins_sti_channel(spi_txbuf + 4, 0xF, instru.sti_channel_pmos);
update_ins_sti_channel(spi_txbuf + 4, 0xF, INSTRUCTION.sti_channel_pmos);
// ins buf [8:B]
update_ins_sti_enable(spi_txbuf + 8, FALSE);
break;
@@ -238,13 +238,13 @@ static void update_ins_sti_buffer() {
spi_txbuf[15] = spi_txbuf[3];
// change content
update_ins_sti_enable(spi_txbuf + 0, TRUE);
update_ins_sti_channel(spi_txbuf + 0, instru.sti_channel_pmos, instru.sti_channel_nmos);
update_ins_sti_channel(spi_txbuf + 0, INSTRUCTION.sti_channel_pmos, INSTRUCTION.sti_channel_nmos);
// ins buf [4:7]
update_ins_sti_enable(spi_txbuf + 4, TRUE);
update_ins_sti_channel(spi_txbuf + 4, instru.sti_channel_nmos, instru.sti_channel_pmos);
update_ins_sti_channel(spi_txbuf + 4, INSTRUCTION.sti_channel_nmos, INSTRUCTION.sti_channel_pmos);
// ins buf [8:B]
update_ins_sti_enable(spi_txbuf + 8, TRUE);
update_ins_sti_channel(spi_txbuf + 8, 0xF, instru.sti_channel_nmos);
update_ins_sti_channel(spi_txbuf + 8, 0xF, INSTRUCTION.sti_channel_nmos);
// ins buf [C:F]
update_ins_sti_enable(spi_txbuf + 12, FALSE);
break;
@@ -281,12 +281,12 @@ static void headstage_tni_update_instruction_callback(uint8_t ins_type, uint8_t
}
static uint8_t *spi_transact_rec_instruction() {
if (IS_REC_MODE(instru.work_mode)) {
if (IS_REC_MODE(INSTRUCTION.work_mode)) {
PIN_setOutputValue(pin_handle, IOID_13, 1); // DBS_P2S turn on
headstage_spi_transaction(SPI_BUFFER_SIZE, spi_txbuf, spi_rxbuf);
PIN_setOutputValue(pin_handle, IOID_13, 0); // DBS_P2S turn off
} else if (IS_ARM_MODE(instru.work_mode) && !adc_clock_signal) {
} else if (IS_ARM_MODE(INSTRUCTION.work_mode) && !adc_clock_signal) {
create_ramp(spi_rxbuf);
}
@@ -22,7 +22,7 @@
#include "EliteWorkData.h"
#include <driverlib/aon_batmon.h>
static void SimpleBLEPeripheral_performPeriodicTask(void);
static void SimpleBLEPeripheral_performPeriodicTask(WorkMode *WorkModeData);
static void SimpleBLEPeripheral_clockHandler(UArg arg) {
// Store the event.
@@ -38,6 +38,15 @@ static void elite_gptimer_callback(GPTimerCC26XX_Handle handle, GPTimerCC26XX_In
GPT.GptimerCounter++;
}
static void megafly_trig_callback(PIN_Handle handle, PIN_Id pinId) {
// bool trig = 1;
// trig = PIN_getInputValue(MEGA_TRIG);
if (INSTRUCTION.eliteFxn == PULSE_MODE && megaTrigEnable){
Mega_PeriodicEvent = true;
Mega_Trig_receive = true;
}
// PIN15_setOutputValue(MEGA_G_LED, 1);
}
static void ZM_update_instruction_callback(uint8_t ins_type, uint8_t chip_ID, uint8_t *ins);
@@ -46,26 +55,27 @@ static void ZM_init() {
// initialize
pin_handle = PIN_open(&ZM_rst, BLE_IO);
// PIN_registerIntCb(pin_handle, megafly_trig_callback);
// PIN_setInterrupt(pin_handle, MEGA_TRIG | PIN_IRQ_NEGEDGE);
Init_Elite15_PIN();
ELITE15_SPI_HOLD();
PIN15_setOutputValue(shutdown_6994, 1); // OFF = 1 => turn off 6994
PIN15_setOutputValue(enable_10v, 0); // enable 10V
PIN15_setOutputValue(HIGH_Z_MODE, 0); // HIGH Z MODE // 1: close; 0: open;
PIN15_setOutputValue(HIGH_Z_MODE, 0); // HIGH Z MODE // 1 => close high_z mode
/* Turn off Megafly output pin */
PIN15_setOutputValue(MEGA_G_LED, 0);
PIN15_setOutputValue(MEGA_R_LED, 0);
PIN15_setOutputValue(MEGA_VAL_0, 0);
PIN15_setOutputValue(MEGA_VAL_1, 1);
InitEliteInstruction();
// init DAC, set output ~= 0 V
instru.VoutGainLevel = VOUT_GAIN_15K;
VoutGainControl(instru.VoutGainLevel);
DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLevel, 25000));
/* when elite open, must change vin level,
measure battery value will be right */
VinADCGainControl(VIN_GAIN_AUTO);
IinADCGainControl(INSTRUCTION.ADCGainLevel);
VinADCGainControl(INSTRUCTION.VinADCGainLevel);
VoutGainControl(INSTRUCTION.VoutGainLevel);
elite_gptimer_open();
elite_gptimer_start();
// PIN_registerIntCb(pin_handle, switch_on_callback);
// PIN_setInterrupt(pin_handle, switch_on | PIN_IRQ_POSEDGE);
@@ -76,7 +86,7 @@ static void ZM_update_instruction_callback(uint8_t ins_type, uint8_t chip_ID, ui
static void DACCode2Real2Notify(uint16_t DACcode) {
int32_t RealV;
RealV = DAC_to_realV(instru.VoutGainLevel, DACcode);
RealV = DAC_to_realV(INSTRUCTION.VoutGainLevel, DACcode);
NotifyVolt[0] = (uint8_t)((RealV & 0xFF000000) >> 24);
NotifyVolt[1] = (uint8_t)((RealV & 0x00FF0000) >> 16);
@@ -85,24 +95,23 @@ static void DACCode2Real2Notify(uint16_t DACcode) {
}
#define IsPeriodicMode() ( \
(instru.eliteFxn == CURVE_IV) || \
(instru.eliteFxn == CURVE_IV_CY) || \
(instru.eliteFxn == CURVE_IT) || \
(instru.eliteFxn == CURVE_VT) || \
(instru.eliteFxn == CURVE_RT) || \
(instru.eliteFxn == CURVE_CC) || \
(instru.eliteFxn == CURVE_CV) || \
(instru.eliteFxn == CURVE_LSV) || \
(instru.eliteFxn == CURVE_CA) || \
(instru.eliteFxn == CURVE_VO) || \
(instru.eliteFxn == CURVE_CALI_ADC) \
(INSTRUCTION.eliteFxn == IV_CURVE) || \
(INSTRUCTION.eliteFxn == CV_CURVE) || \
(INSTRUCTION.eliteFxn == IT_CURVE) || \
(INSTRUCTION.eliteFxn == VT_CURVE) || \
(INSTRUCTION.eliteFxn == ZT_CURVE) || \
(INSTRUCTION.eliteFxn == CONSTANT_CURRENT) || \
(INSTRUCTION.eliteFxn == CYCLIC_VOLTAMMETRY) || \
(INSTRUCTION.eliteFxn == LINEAR_SWEEP_VOLTAMMETRY) || \
(INSTRUCTION.eliteFxn == CONSTANT_VSCAN) || \
(INSTRUCTION.eliteFxn == CALI_ADC_MODE) \
)
#define Ve1MatchVe2Mode() ( \
(instru.eliteFxn == CURVE_IV) || \
(instru.eliteFxn == CURVE_IV_CY) || \
(instru.eliteFxn == CURVE_CV) || \
(instru.eliteFxn == CURVE_LSV) \
(INSTRUCTION.eliteFxn == IV_CURVE) || \
(INSTRUCTION.eliteFxn == CV_CURVE) || \
(INSTRUCTION.eliteFxn == CYCLIC_VOLTAMMETRY) || \
(INSTRUCTION.eliteFxn == LINEAR_SWEEP_VOLTAMMETRY) \
)
/*********************************************************************
@@ -114,61 +123,39 @@ static void DACCode2Real2Notify(uint16_t DACcode) {
*
* @return None.
*/
static void SimpleBLEPeripheral_performPeriodicTask(void) {
if (IsPeriodicMode()) {
static void SimpleBLEPeripheral_performPeriodicTask(WorkMode *WorkModeData) {
if ( IsPeriodicMode() ){
/** Periodic Event **/
// Default working flow is vscan -> ADC read -> send notify
// We will need a flag to control vscan, ADC and notify
static bool first_highz_flag = false;
GPT.DeltaGptimerCounter = GPT.GptimerCounter - GPT.GptimerCounter0;
GPT.GptimerCounter0 = GPT.GptimerCounter;
if (mode_init) {
GPT.SampleRateCounter = instru.sampleRate - 10;
GPT.VscanRateCounter = instru.VsetRate - 1;
mode_init = false;
if(EliteWorkReset){
InitEliteGPtimer();
EliteWorkReset = false;
batteryADC_flag = false;
record_flag = true;
firstTimeReset = true;
notifyFirst_flag = true;
first_highz_flag = true;
I_GAIN_100R_counter = 0;
I_GAIN_3K_counter = 0;
I_GAIN_100K_counter = 0;
I_GAIN_3M_counter = 0;
VIN_GAIN_1M_counter = 0;
VIN_GAIN_30K_counter = 0;
VIN_GAIN_1K_counter = 0;
VOUT_GAIN_240K_counter = 0;
VOUT_GAIN_15K_counter = 0;
DACReset = true;
vscanReset = true;
leadTimeReset = true;
VinADCGainControl(instru.VinADCGainLevel);
IinADCGainControl(instru.ADCGainLevel);
VoutGainControl(instru.VoutGainLevel);
if (Ve1MatchVe2Mode()) {
if (instru.Ve1 == instru.Ve2) {
DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLevel, instru.Ve1));
VinADCGainControl(INSTRUCTION.VinADCGainLevel);
IinADCGainControl(INSTRUCTION.ADCGainLevel);
VoutGainControl(INSTRUCTION.VoutGainLevel);
if( Ve1MatchVe2Mode() ){
if (INSTRUCTION.Ve1 == INSTRUCTION.Ve2) {
DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, INSTRUCTION.Ve1));
PeriodicEvent = false;
PIN15_setOutputValue(HIGH_Z_MODE, 0); // 0: open highz;
ModeLED(NO_EVENT);
}
}
}
GPT.LeadTimeCounter = GPT.LeadTimeCounter + GPT.DeltaGptimerCounter;
if (leadTimeReset && GPT.LeadTimeCounter <= 2000) {
if(leadTimeReset && GPT.LeadTimeCounter <= 2000){
vscanReset = true;
if (first_highz_flag && GPT.LeadTimeCounter >= 1000) {
PIN15_setOutputValue(HIGH_Z_MODE, 1); // HIGH Z MODE // 1: close; 0: open;
first_highz_flag = false;
}
} else {
if (notifyFirst_flag) {
GPT.NotifyCounter = instru.notifyRate - 20;
}else{
if(notifyFirst_flag){
GPT.NotifyCounter = INSTRUCTION.notifyRate - 20;
notifyFirst_flag = false;
}
vscanReset = false;
@@ -177,16 +164,16 @@ static void SimpleBLEPeripheral_performPeriodicTask(void) {
//vscan counter
GPT.VscanRateCounter = GPT.VscanRateCounter + GPT.DeltaGptimerCounter;
if (GPT.VscanRateCounter >= instru.VsetRate) {
if (GPT.VscanRateCounter >= instru.VsetRate * 2) {
GPT.GptimerMultiple = GPT.VscanRateCounter / instru.VsetRate;
} else {
if(GPT.VscanRateCounter >= INSTRUCTION.VsetRate){
if(GPT.VscanRateCounter >= INSTRUCTION.VsetRate * 2){
GPT.GptimerMultiple = GPT.VscanRateCounter / INSTRUCTION.VsetRate;
}else{
GPT.GptimerMultiple = 1;
}
GPT.VscanRateCounter -= instru.VsetRate * GPT.GptimerMultiple; //To get right time
GPT.VscanRateCounter -= INSTRUCTION.VsetRate * GPT.GptimerMultiple; //To get right time
vscan_flag = true;
if (vscan_flag) {
vscan_ctrl();
if(vscan_flag){
EliteVscanControl(WorkModeData);
vscan_flag = false;
}
}
@@ -206,11 +193,11 @@ static void SimpleBLEPeripheral_performPeriodicTask(void) {
//ADC counter
GPT.SampleRateCounter = GPT.SampleRateCounter + GPT.DeltaGptimerCounter;
if(GPT.SampleRateCounter >= instru.sampleRate){
if(GPT.SampleRateCounter >= INSTRUCTION.sampleRate){
GPT.SampleRateCounter = 0; //To get right data, ADC must be delay 1.5ms
ADC_flag = true;
if(ADC_flag){
EliteADCControl();
EliteADCControl(WorkModeData);
ADC_flag = false;
}
}
@@ -218,8 +205,8 @@ static void SimpleBLEPeripheral_performPeriodicTask(void) {
//Notify counter(Notify control, check if we need to send notify)
//please don't put Notify counter before ADC counter, maybe get wrong data
GPT.NotifyCounter = GPT.NotifyCounter + GPT.DeltaGptimerCounter;
if(GPT.NotifyCounter >= instru.notifyRate){
GPT.NotifyCounter -= instru.notifyRate; //To get right time
if(GPT.NotifyCounter >= INSTRUCTION.notifyRate){
GPT.NotifyCounter -= INSTRUCTION.notifyRate; //To get right time
notify_flag = true;
if(vscanReset){
notify_flag = false;
@@ -230,9 +217,9 @@ static void SimpleBLEPeripheral_performPeriodicTask(void) {
}
}
mode_done();
// EliteDone();
}
else if (instru.eliteFxn == CURVE_PULSE) {
else if (INSTRUCTION.eliteFxn == PULSE_MODE) {
/** Periodic Event **/
// Default working flow is vscan -> ADC read -> send notify
// We will need a flag to control vscan, ADC and notify
@@ -240,33 +227,33 @@ static void SimpleBLEPeripheral_performPeriodicTask(void) {
GPT.DeltaGptimerCounter = GPT.GptimerCounter - GPT.GptimerCounter0;
GPT.GptimerCounter0 = GPT.GptimerCounter;
if(mode_init){
GPT.SampleRateCounter = instru.sampleRate - 10;
GPT.VscanRateCounter = instru.VsetRate - 1;
mode_init = false;
if(EliteWorkReset){
InitEliteGPtimer();
EliteWorkReset = false;
batteryADC_flag = false;
record_flag = true;
firstTimeReset = true;
notifyFirst_flag = true;
//pulsemode variable
stiFirstTime = true;
VinADCGainControl(instru.VinADCGainLevel);
IinADCGainControl(instru.ADCGainLevel);
VoutGainControl(instru.VoutGainLevel);
ledGFirstTime = true; //green led
ledRFirstTime = true; //red led
gas0FirstTime = true; //gas0
gas1FirstTime = true; //gas1
VinADCGainControl(INSTRUCTION.VinADCGainLevel);
IinADCGainControl(INSTRUCTION.ADCGainLevel);
VoutGainControl(INSTRUCTION.VoutGainLevel);
if (Ve1MatchVe2Mode()) {
if (instru.Ve1 == instru.Ve2) {
DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLevel, instru.Ve1));
if (INSTRUCTION.Ve1 == INSTRUCTION.Ve2) {
DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, INSTRUCTION.Ve1));
PeriodicEvent = false;
PIN15_setOutputValue(HIGH_Z_MODE, 0); // 0: open highz;
ModeLED(NO_EVENT);
}
} else if (instru.eliteFxn == CURVE_PULSE) {
if(!megaStiEnable){
PeriodicEvent = false;
PIN15_setOutputValue(HIGH_Z_MODE, 0); // 0: open highz;
ModeLED(NO_EVENT);
}
} else if (INSTRUCTION.eliteFxn == PULSE_MODE) {
if(!megaStiEnable && !megaLedGEnable && !megaLedREnable && !megaGas0Enable && !megaGas1Enable){
PeriodicEvent = false;
ModeLED(NO_EVENT);
}
}
}
@@ -275,37 +262,56 @@ static void SimpleBLEPeripheral_performPeriodicTask(void) {
vscanReset = true;
}else{
if(notifyFirst_flag){
GPT.NotifyCounter = instru.notifyRate - 20;
GPT.NotifyCounter = INSTRUCTION.notifyRate - 20;
notifyFirst_flag = false;
}
vscanReset = false;
leadTimeReset = false;
}
//vscan counter
GPT.VscanRateCounter = GPT.VscanRateCounter + GPT.DeltaGptimerCounter;
//pulse mode counter
GPT.StiCounter = GPT.StiCounter + GPT.DeltaGptimerCounter;
GPT.LedGCounter = GPT.LedGCounter + GPT.DeltaGptimerCounter;
GPT.LedRCounter = GPT.LedRCounter + GPT.DeltaGptimerCounter;
GPT.Gas0Counter = GPT.Gas0Counter + GPT.DeltaGptimerCounter;
GPT.Gas1Counter = GPT.Gas1Counter + GPT.DeltaGptimerCounter;
if (vscanReset) {
DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLevel, 25000));
DAC_outputV(Usercode_Correction_to_DAC(instru.VoutGainLevel, 25000));
DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, 25000));
DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, 25000));
//vscanReset = false;
}else{
if (megaStiEnable) {
pulse_vscan();
PULSE_Vscan(WorkModeData->PULSE);
}
if (megaLedGEnable){
PULSE_ledG(WorkModeData->PULSE);
}
if (megaLedREnable){
PULSE_ledR(WorkModeData->PULSE);
}
if (megaGas0Enable){
PULSE_gas0(WorkModeData->PULSE);
}
if (megaGas1Enable){
PULSE_gas1(WorkModeData->PULSE);
}
}
// if(GPT.VscanRateCounter >= instru.VsetRate){
// if(GPT.VscanRateCounter >= instru.VsetRate * 2){
// GPT.GptimerMultiple = GPT.VscanRateCounter / instru.VsetRate;
// if(GPT.VscanRateCounter >= INSTRUCTION.VsetRate){
// if(GPT.VscanRateCounter >= INSTRUCTION.VsetRate * 2){
// GPT.GptimerMultiple = GPT.VscanRateCounter / INSTRUCTION.VsetRate;
// }else{
// GPT.GptimerMultiple = 1;
// }
// GPT.VscanRateCounter -= instru.VsetRate * GPT.GptimerMultiple; //To get right time
// GPT.VscanRateCounter -= INSTRUCTION.VsetRate * GPT.GptimerMultiple; //To get right time
// vscan_flag = true;
// if(vscan_flag){
// vscan_ctrl();
// EliteVscanControl(WorkModeData);
// vscan_flag = false;
// }
// }
@@ -320,16 +326,16 @@ static void SimpleBLEPeripheral_performPeriodicTask(void) {
uint16_t bat = ((uint16_t)(NotifyVoltBat[2]) << 8 & 0xFF00 ) | ((uint16_t)(NotifyVoltBat[3]) & 0x00FF);
if( bat < 768 && bat > 20){
PIN15_setOutputValue(enable_5v, 0);
// PIN15_setOutputValue(enable_5v, 0);
}
//ADC counter
GPT.SampleRateCounter = GPT.SampleRateCounter + GPT.DeltaGptimerCounter;
if(GPT.SampleRateCounter >= instru.sampleRate){
if(GPT.SampleRateCounter >= INSTRUCTION.sampleRate){
GPT.SampleRateCounter = 0; //To get right data, ADC must be delay 1.5ms
ADC_flag = true;
if(ADC_flag){
EliteADCControl();
EliteADCControl(WorkModeData);
ADC_flag = false;
}
}
@@ -337,107 +343,138 @@ static void SimpleBLEPeripheral_performPeriodicTask(void) {
//Notify counter(Notify control, check if we need to send notify)
//please don't put Notify counter before ADC counter, maybe get wrong data
GPT.NotifyCounter = GPT.NotifyCounter + GPT.DeltaGptimerCounter;
if(GPT.NotifyCounter >= instru.notifyRate){
GPT.NotifyCounter -= instru.notifyRate; //To get right time
if(GPT.NotifyCounter >= INSTRUCTION.notifyRate){
GPT.NotifyCounter -= INSTRUCTION.notifyRate; //To get right time
notify_flag = true;
if(vscanReset){
notify_flag = false;
}
if(notify_flag){
if(notify_flag && megaStiEnable){
InputNotify(NOTIFY_IMPEDANCE, Mega_Trig_receive);
SendNotify();
Mega_Trig_receive = false;
notify_flag = false;
}
}
mode_done();
}
else if (instru.eliteFxn == CURVE_CALI_DAC) {
DAC_outputV(instru.VoltConstant); //UserCode -> DAC code -> DAC out
wm_deinit();
// EliteDone();
}
else if(INSTRUCTION.eliteFxn == VOLT_OUTPUT){
WorkModeData->VO->_Vset = INSTRUCTION.VoltConstant;
DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, WorkModeData->VO->_Vset)); //UserCode -> DAC code -> DAC out
FreeWorkMode(WorkModeData);
PeriodicEvent = false;
} else {
}
else if(INSTRUCTION.eliteFxn == CALI_DAC_MODE){
DAC_outputV(INSTRUCTION.VoltConstant); //UserCode -> DAC code -> DAC out
FreeWorkMode(WorkModeData);
PeriodicEvent = false;
}
else{
// InitFlag();
}
}
static void EliteADCControl(void)
{
switch (instru.eliteFxn) {
case CURVE_IV:
case CURVE_RT:
case CURVE_CC:
case CURVE_CV:
case CURVE_CA:
case CURVE_VO:
case CURVE_LSV:
case CURVE_IV_CY:
case CURVE_PULSE:
CC_Plot();
static void EliteADCControl(WorkMode *WorkModeData) {
switch (INSTRUCTION.eliteFxn) {
case IV_CURVE:{
CC_Plot(WorkModeData);
break;
}
case CV_CURVE:{
CC_Plot(WorkModeData);
break;
}
case IT_CURVE:{
IT_Plot(WorkModeData);
break;
}
case VT_CURVE:{
VT_Plot(WorkModeData);
break;
}
case ZT_CURVE:{
CC_Plot(WorkModeData);
break;
}
case CONSTANT_CURRENT:{
CC_Plot(WorkModeData);
break;
}
case CYCLIC_VOLTAMMETRY:{
CC_Plot(WorkModeData);
break;
}
case LINEAR_SWEEP_VOLTAMMETRY:{
CC_Plot(WorkModeData);
break;
}
case CONSTANT_VSCAN:{
CC_Plot(WorkModeData);
break;
}
case CALI_ADC_MODE:{
if(INSTRUCTION.AdcChannel == IIN_ADC){
cali_IT_plot(WorkModeData);
}else if(INSTRUCTION.AdcChannel == VIN_ADC){
cali_VT_plot(WorkModeData);
}
case CURVE_IT:
IT_Plot();
break;
case CURVE_VT:
VT_Plot();
}
case PULSE_MODE:{
CC_Plot(WorkModeData);
break;
case CURVE_CALI_ADC:
if (instru.AdcChannel == IIN_ADC) cali_IT_plot();
else if (instru.AdcChannel == VIN_ADC) cali_VT_plot();
break;
default:
}
default:{
break;
}
}
}
static void mode_done(void)
{
if ((instru.eliteFxn == CURVE_IV) ||
(instru.eliteFxn == CURVE_CV) ||
(instru.eliteFxn == CURVE_LSV) ||
(instru.eliteFxn == CURVE_IV_CY)) {
static void EliteDone() {
if ((INSTRUCTION.eliteFxn == IV_CURVE) || (INSTRUCTION.eliteFxn == CV_CURVE) || (INSTRUCTION.eliteFxn == CYCLIC_VOLTAMMETRY)) {
if (!PeriodicEvent) {
finishMode = 1;
SendNotify();
Eliteinterrupt();
}
}
}
static void vscan_ctrl(void)
{
switch (instru.eliteFxn) {
case CURVE_IV:
iv_vscan();
static void EliteVscanControl(WorkMode *WorkModeData) {
switch (INSTRUCTION.eliteFxn) {
case IV_CURVE:{
IV_Vscan(WorkModeData->IV);
break;
case CURVE_IV_CY:
iv_cy_vscan();
}
case CV_CURVE:{
CV_Vscan(WorkModeData->CV);
break;
case CURVE_VO:
vo_vscan();
}
case ZT_CURVE:{
ZT_Vscan(WorkModeData->RT);
break;
case CURVE_RT:
rt_vscan();
}
case CYCLIC_VOLTAMMETRY:{
CV3_Vscan(WorkModeData->CV3);
break;
case CURVE_CV:
cv_vscan();
}
case CONSTANT_CURRENT:{
CC_Vscan(WorkModeData->CC);
break;
case CURVE_LSV:
lsv_vscan();
}
case LINEAR_SWEEP_VOLTAMMETRY:{
LSV_Vscan(WorkModeData->LSV);
break;
case CURVE_CA:
ca_vscan();
}
case CONSTANT_VSCAN:{
CVSCAN_Vscan(WorkModeData->CVSCAN);
break;
}
case PULSE_MODE:{
// PULSE_Vscan(WorkModeData->PULSE);
break;
}
default:{
break;
}
@@ -472,16 +509,38 @@ static void step2VsetRate(uint32_t step){
0.01mv, index = 4, n = 10000 */
if(step >= 10000){
instru.VsetRateIndex = 0;
INSTRUCTION.VsetRateIndex = 0;
}else if (step >= 1000){
instru.VsetRateIndex = 1;
INSTRUCTION.VsetRateIndex = 1;
}else if (step >= 100){
instru.VsetRateIndex = 2;
INSTRUCTION.VsetRateIndex = 2;
}else if (step >= 10){
instru.VsetRateIndex = 3;
INSTRUCTION.VsetRateIndex = 3;
}else if (step >= 1){
instru.VsetRateIndex = 4;
INSTRUCTION.VsetRateIndex = 4;
}
}
static void InitFlag(){
PeriodicEvent = false; // is there an PeriodicEvent?
Free_Work_Mode = true; // Free(WorkModeData)
}
static void InitEliteGPtimer() {
GPT.SampleRateCounter = INSTRUCTION.sampleRate - 10;
GPT.VscanRateCounter = INSTRUCTION.VsetRate - 1;
notifyFirst_flag = true;
}
static void InitEliteFlag() {
InitPeriodicEvent = true; // need to create a WorkModeData?
DACReset = true;
vscanReset = true;
EliteWorkReset = true;
leadTimeReset = true;
I_GAIN_100R_counter = 0;
I_GAIN_3K_counter = 0;
I_GAIN_100K_counter = 0;
I_GAIN_3M_counter = 0;
}
#endif /* IMPEDANCE_METER_H_ */
@@ -543,18 +543,26 @@ static void SimpleBLEPeripheral_init(void) {
// static void detectKey_clockHandler(UArg arg);
static void SimpleBLEPeripheral_taskFxn(UArg a0, UArg a1) {
uint8_t key= 0;
bool EliteOn = 0;
uint16_t counter6994 = 0;
batteryADC_flag = false;
// Initialize application
SimpleBLEPeripheral_init();
ZM_init();
WorkMode *WorkModeData = CreateWorkMode();
// init DAC, set output ~= 0 V
INSTRUCTION.VoutGainLevel = VOUT_GAIN_15K;
VoutGainControl(INSTRUCTION.VoutGainLevel);
DAC_outputV(Usercode_Correction_to_DAC(INSTRUCTION.VoutGainLevel, 25000));
uint8_t key = 0;
uint16_t counter6994 = 0;
bool EliteOn = 0;
elite_gptimer_start();
// Application main loops
GPT.GptimerCounter0 = GPT.GptimerCounter;
batteryADC_flag = false;
headstage_battery_volt();
headstage_init_device_info();
@@ -605,42 +613,57 @@ static void SimpleBLEPeripheral_taskFxn(UArg a0, UArg a1) {
}
}
}
if(events & SBP_PERIODIC_EVT){
events &= ~SBP_PERIODIC_EVT;
if (!PeriodicEvent) { // if there is no periodic event
key = PIN_getInputValue(switch_on);
if (EliteOn) {
if (counter6994 < CLOCK_ONE_SECOND*5) { // counter6994 enable a IC after 35 counts
if (counter6994 < CLOCK_ONE_SECOND/2) { // counter6994 enable a IC after 35 counts
counter6994++;
} else if (counter6994 == CLOCK_ONE_SECOND*5) {
PIN15_setOutputValue(shutdown_6994, 0); // OFF = 1 => turn off 6994
} else if (counter6994 == CLOCK_ONE_SECOND/2) {
PIN15_setOutputValue(shutdown_6994, 1); // OFF = 1 => turn off 6994
counter6994++;
} else if (counter6994 > CLOCK_ONE_SECOND*5) {
counter6994 = 0;
}
EliteKeyPress(key);
if(key != 0){ //detect Elite battery power when no periodic event
measureBat();
}
// if(key != 0){ //detect Elite battery power when no periodic event
// measureBat();
// }
if(Free_Work_Mode){
wm_deinit();
FreeWorkMode(WorkModeData);
InitEliteInstruction();
Free_Work_Mode = false;
}
/* Megafly trigger */
// trig = PIN_getInputValue(MEGA_TRIG); // trigger: 1 -> 0
if (Mega_PeriodicEvent) {
Mega_PeriodicEvent = false;
PeriodicEvent = true;
} else {
}
} else {
EliteOn = TurnOnElite(key);
// EliteOn = TurnOnElite(key);
headstage_battery_volt();
uint16_t bat = ((uint16_t)(NotifyVoltBat[2]) << 8 & 0xFF00 ) |
((uint16_t)(NotifyVoltBat[3]) & 0x00FF);
PIN15_setOutputValue(enable_5v, 1); // enable 5V
TurnOn10V();
ModeLED(BT_WAIT);
EliteOn = true;
}
}
else { // if there is periodic event
if(InitPeriodicEvent){
wm_init();
InitWorkMode(WorkModeData);
InitPeriodicEvent = false;
}
// Perform periodic application task
SimpleBLEPeripheral_performPeriodicTask();
SimpleBLEPeripheral_performPeriodicTask(WorkModeData);
key = PIN_getInputValue(switch_on);
EliteKeyPress(key); // onPress=> key = 0; 1.lighten LED 2.long press shut down 2650
}
@@ -919,16 +942,16 @@ static void SimpleBLEPeripheral_processStateChangeEvt(gaprole_States_t newState)
numActive = linkDB_NumActive();
uint16_t cxnHandle;
// requestedPDUSize = LL payload = L2CAP_header + ATT header + BLE_NOT_BUFF_SIZE = 7 + BLE_NOT_BUFF_SIZE //roy
uint16_t requestedPDUSize = 251; //251 roy
uint16_t requestTxTime = 2120; // (LL payload + 14) * 8 //2120 roy
GAPRole_GetParameter(GAPROLE_CONNHANDLE, &cxnHandle);
if (SUCCESS == HCI_LE_SetDataLenCmd(cxnHandle, requestedPDUSize, requestTxTime)) {
// LED_color(DARKLED, 0xFF, 0x00, 0xFF);
}
// uint16_t cxnHandle;
//
// // requestedPDUSize = LL payload = L2CAP_header + ATT header + BLE_NOT_BUFF_SIZE = 7 + BLE_NOT_BUFF_SIZE //roy
// uint16_t requestedPDUSize = 251; //251 roy
// uint16_t requestTxTime = 2120; // (LL payload + 14) * 8 //2120 roy
// GAPRole_GetParameter(GAPROLE_CONNHANDLE, &cxnHandle);
//
// if (SUCCESS == HCI_LE_SetDataLenCmd(cxnHandle, requestedPDUSize, requestTxTime)) {
//// LED_color(DARKLED, 0xFF, 0x00, 0xFF);
// }
// Use numActive to determine the connection handle of the last
// connection
@@ -969,7 +992,6 @@ static void SimpleBLEPeripheral_processStateChangeEvt(gaprole_States_t newState)
case GAPROLE_WAITING_AFTER_TIMEOUT:
SimpleBLEPeripheral_freeAttRsp(bleNotConnected);
ModeLED(BT_WAIT);
#ifdef PLUS_BROADCASTER
// Reset flag for next connection.
@@ -85,7 +85,7 @@ extern "C"
// Length of Characteristic 5 in bytes
#define SIMPLEPROFILE_CHAR5_LEN 5
#define SIMPLEPROFILE_CHAR4_LEN 60
#define SIMPLEPROFILE_CHAR4_LEN 20
#define SIMPLEPROFILE_CHAR3_LEN 20
#define SIMPLEPROFILE_CHAR2_LEN 20