[update] hide print

python/biopro/device/device_cc2650.py

@@ -536,7 +536,7 @@ class CC2650Device(Device):
             self._master.log_warn('device', self.device_id, 'update_battery_info no response')
 
         else:
-            if data is not None and len(data) == 4 :
+            if data is not None and len(data) > 2 :
                 battery = struct.unpack('<H', data[1:3])[0]
                 if battery is not None:
                     self._battery = battery
@@ -2035,6 +2035,7 @@ class CC2650SingleMasterCentralDevice(CC2650MasterDevice, Synchronized):
         # print("local_name = ", local_name)
 
         # addr type is don't care in BMD380
+        print('scan_response:', list(scan_response))
         local_addr_type = int(scan_response[index:index + 1][0])
         # local_addr_type = 0xFF
         index = index + 1

python/biopro/devlib/data.py

@@ -882,15 +882,18 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
         if len(data) < 18:
             return None
 
-        time_stamp: float = struct.unpack('<I', data[1:5])[0]  # unit: ms 0x18030000
-        current = struct.unpack('<i', data[5:9])[0]  # unit: nA
-        voltage = struct.unpack('<i', data[9:13])[0]  # unit: uV
-        impedance = struct.unpack('<i', data[13:17])[0]  # unit: mOm
-        cycle_number = struct.unpack('<H', data[17:19])[0]
-        finish_mode_falg = data[19]
+        mem_cnt = data[1]
+        time_stamp: float = struct.unpack('<I', data[4:8])[0]  # unit: ms 0x18030000
+        current = struct.unpack('<i', data[8:12])[0]  # unit: nA
+        voltage = struct.unpack('<i', data[12:16])[0]  # unit: uV
+        impedance = struct.unpack('<i', data[16:20])[0]  # unit: mOm
+        cycle_number = struct.unpack('<H', data[20:22])[0]
+        finish_mode_falg = data[22]
+        battery = struct.unpack('<i', data[23:27])[0]
+        elite_notify_times = data[27]
 
-        mem_wrong_information = struct.unpack('<i', data[40:40+4])[0] # mem_wrong_information = green retry, green wrong, red retry, red wrong
-        ram_num = data[44]
+        mem_wrong_information = struct.unpack('<i', data[43:47])[0] # mem_wrong_information = green retry, green wrong, red retry, red wrong
+        ram_num = data[47]
         broken_flag = data[-1]
 
         if (finish_mode_falg & 0b11110000 == 0b10100000):
@@ -942,12 +945,15 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
         ret.append_data(1, voltage)
         ret.append_data(2, impedance)
         ret.append_data(3, cycle_number)
+        ret.append_data(4, battery)
+        ret.append_data(5, elite_notify_times)
+        ret.append_data(6, mem_cnt)
 
         # memoryboard information
-        ret.append_data(4, ram_num)
-        ret.append_data(5, broken_flag)
+        ret.append_data(7, ram_num)
+        ret.append_data(8, broken_flag)
         try:
-            ret.append_data(6, mem_wrong_information)
+            ret.append_data(9, mem_wrong_information)
             # print('append_data success, mem_wrong_information:', mem_wrong_information, hex(mem_wrong_information))
         except:
             print('append_data fail, mem_wrong_information:', mem_wrong_information, hex(mem_wrong_information))
@@ -1450,12 +1456,12 @@ class EISZeroOneDataDecoder(RecDataDecoder):
         if len(data) < 18:
             return None
 
-        ch1 = struct.unpack('>i', data[1:5])[0]  # unit: 1/1000 nA
-        ch2 = struct.unpack('>i', data[5:9])[0]  # unit: mV
-        ch3 = struct.unpack('>i', data[9:13])[0]  # unit: kOm
-        time_stamp: float = struct.unpack('<I', data[13:17])[0]  # unit: ms
-        cycle_number = struct.unpack('>H', data[17:19])[0]
-        d19 = data[19]
+        ch1 = struct.unpack('>i', data[1+3:5+3])[0]  # unit: 1/1000 nA
+        ch2 = struct.unpack('>i', data[5+3:9+3])[0]  # unit: mV
+        ch3 = struct.unpack('>i', data[9+3:13+3])[0]  # unit: kOm
+        time_stamp: float = struct.unpack('<I', data[13+3:17+3])[0]  # unit: ms
+        cycle_number = struct.unpack('>H', data[17+3:19+3])[0]
+        d19 = data[19+3]
         gain = (d19 & 0x0F)
         finishMode = (d19 & 0x80) >> 7        
         

python/biopro/impl/ext_mem.py

@@ -46,7 +46,7 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
 
         self._elite_data_len = 40
         self._mem_header_len = 3
-        self._mem_tailer_len = 8
+        self._mem_tailer_len = 6
         self._single_data_len = self._elite_data_len + self._mem_header_len + self._mem_tailer_len
 
         # buffer
@@ -167,10 +167,33 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
         print("read red data times", self._read_red_times)
         return data
 
+    def _compare_green_data_addr_and_flag(self, data: Union[bytes, List[int]], device: int):
+
+        green_data_section1 = data[3:7]
+        green_data_section2 = data[7:11]
+        green_data_section3 = data[11:15]
+        green_data_section = []
+
+        if green_data_section1 == green_data_section2:
+            green_data_section = green_data_section1
+
+        elif(green_data_section2 == green_data_section3 or green_data_section1 == green_data_section3):
+            print("green data not equal: = ", data[3:15])
+            print("green data print:", data, device, datetime.now())
+            green_data_section = green_data_section3
+
+        else:
+            print("green data not equal: = ", data[3:15])
+            print("green data print:", data, device, datetime.now())
+            green_data_section = green_data_section3 # use last data
+
+
+        return green_data_section
+
     def _print_ram_all_data(self):
         addr = 0
         red_length = int(7000 / 2)
-        tx_temp = [0] * red_length
+        tx_temp = [0] * (red_length + 3)
 
         while True:
             tx_temp[0] = MEM_INS_READ
@@ -216,7 +239,7 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
                 self._head_wrong_cnt[device] = self._head_wrong_cnt[device] + 1
                 if (self._head_wrong_cnt[device] <= 5): # print 5 times
                     print('data_first[0:3] != [255, 255, 255], device:', device, ',', self._head_wrong_cnt[device], 'times')
-                    print(list(data[0:15]))
+                    print(list(data))
 
             data[0:3] = [255, 255, 255]
             # ----------------------------------------------------------------------------------------------
@@ -235,13 +258,13 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
             #     self._head_wrong_cnt[device] = self._head_wrong_cnt[device] + 1
             #     if (self._head_wrong_cnt[device] < 10):
             #         print('data_first[0:3] != [255, 255, 255], device:', device, ',', self._head_wrong_cnt[device], 'times')
-            #         print(list(data_first[0:7]))
+            #         print(list(data_first))
 
             # if (data_second[0] != 255 or data_second[1] != 255 or data_second[2] != 255):
             #     self._head_wrong_cnt[device] = self._head_wrong_cnt[device] + 1
             #     if (self._head_wrong_cnt[device] < 10):
             #         print('data_second[0:3] != [255, 255, 255], device:', device, ',', self._head_wrong_cnt[device], 'times')
-            #         print(list(data_second[0:7]))
+            #         print(list(data_second))
 
             # if (data_first[3:] == data_second[3:]):
             #     data = data_first
@@ -253,27 +276,7 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
             #     data = self.compare_green_data(data_first, data_second, data_third, len(tx_h))
             # ----------------------------------------------------------------------------------------------
 
-            # debug use
-            # green_data = []
-            # green_data = data
-            # print("_[Debug] @ spi green data = ", green_data)
-
-            green_data_section1 = data[3:7]
-            green_data_section2 = data[7:11]
-            green_data_section3 = data[11:15]
-
-            if green_data_section1 == green_data_section2:
-                green_data_section = green_data_section1
-
-            elif(green_data_section2 == green_data_section3 or green_data_section1 == green_data_section3):
-                print("green data not equal: = ", data[3:15])
-                print("green data print:", data, device, datetime.now())
-                green_data_section = green_data_section3
-
-            else:
-                print("green data not equal: = ", data[3:15])
-                print("green data print:", data, device, datetime.now())
-                green_data_section = green_data_section3 # use last data
+            green_data_section = self._compare_green_data_addr_and_flag(data, device)
 
             length = (green_data_section[0] << 8) | green_data_section[1]
             header = data[15]
@@ -284,8 +287,8 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
                     print("length < 12")
                     print("green data print:", data, device, datetime.now())
 
-                if length == 0:
-                    self._print_ram_all_data()
+                # if length == 0:
+                #     self._print_ram_all_data()
 
                 return None
 
@@ -302,7 +305,7 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
             if (header != 255):
                 flag_print = True
                 print("green data: header is not 255: ", header)
-                self._print_ram_all_data()
+                # self._print_ram_all_data()
 
             if (elite_data_len != self._elite_data_len):
                 flag_print = True
@@ -311,18 +314,9 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
             if (flag_print):
                 print("green data print:", data, device, datetime.now(), '\n')
 
-            # neulive
-            # address += len(data) - 11
-            # tx_d = self._tx_buffer_data
-            # red_length = len(tx_d)
-
             address = 12
             red_length = int(length / 2)
-            tx_d = [0] * red_length
-
-            # elite read len(_tx_buffer_data) byte
-            # address = 12
-            # tx_d = self._tx_buffer_data
+            tx_d = [0] * (red_length + 3)
 
             while True:
                 tx_d[0] = MEM_INS_READ
@@ -377,11 +371,40 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
             #  * red data formate:
             #  * ramHdr, ramHdr, ramHdr,                                   (3B)
             #  * 255, #, data_length,                                      (3B)
-            #  * data,                                                     (20B)
+            #  * data,                                                     (40B)
             #  * red_wrong, red_retry_cnt, green_wrong, green_retry_cnt,   (4B)
-            #  * 255, #, data_length,                                      (3B) 
+            #  * check_num,                                                (1B)
             #  *                                                                  */
 
+            # read again if check num is wrong
+            index = 0
+            check_number_print = False
+            for i in range(0, len(rx), self._single_data_len):
+                check_sum = sum(rx[i : i + self._single_data_len - 1]) & 0b11111111
+                # print(check_sum, rx[i + self._single_data_len - 1])
+
+                if (check_sum != rx[i + self._single_data_len - 1]):
+                    # print('check_sum wrong, origin value:', 'check_sum =', check_sum, rx[i : i + self._single_data_len])
+                    tx_d = [0] * (self._single_data_len + 3)
+                    address = 12 + self._single_data_len * index
+                    tx_d[0] = MEM_INS_READ
+                    tx_d[1] = ((address >> 8) & 0xFF)
+                    tx_d[2] = (address & 0xFF)
+
+                    data = []
+                    data = self._spi.send_byte(tx_d)
+                    data[0:3] = [255, 255, 255]
+                    rx[i : i + self._single_data_len] = data[3:]
+                    print('check_sum wrong, read again:', 'check_sum =', check_sum, rx[i : i + self._single_data_len])
+                    check_number_print = True
+                index = index + 1
+
+            if check_number_print:
+                print('check_sum wrong:', device, datetime.now())
+                for i in range(0, len(rx), self._single_data_len):
+                    print(rx[i:i+self._single_data_len])
+                print()
+
             # mark read
             self._spi.send_byte(self.MEM_INS_MARKED1)
             self._spi.send_byte(self.MEM_INS_MARKED2)

python/biopro/project/action.py

@@ -9,7 +9,6 @@ class Action():
         self._duration = action.get('duration', None)
         self._goto = action.get('goto', None)
         self._cycle = action.get('cycle', None)
-        
         self._instruction = None
 
         self.update_instruction()
@@ -19,12 +18,16 @@ class Action():
         return self._type
 
     def update_instruction(self):
+        instruction_type = self._type
+        if instruction_type == 'stop':
+            instruction_type = 'interrupt'
+
         self._instruction = {
             "device_instruction": {
                 "header": "call_instruction",
                 "device": self._target,
                 "arguments": {
-                    "instruction": self._type,
+                    "instruction": instruction_type,
                 }
             },
             "device_parameter": {

python/biopro/project/condition.py

@@ -3,7 +3,6 @@ from time import time
 
 class Condition():
     def __init__(self, id, condition):
-        print('condition', id, condition)
         self._id = id
         self._type = condition['type']
         self._comparsion = condition['comparsion']
@@ -12,12 +11,15 @@ class Condition():
     @property
     def id(self):
         return self._id
+
     @property
     def type(self):
         return self._type
+
     @property
     def comparsion(self):
         return self._comparsion
+
     @property
     def value(self):
         return self._value
@@ -38,11 +40,11 @@ class Condition():
             "smaller": lambda a, b: a < b,
         }
 
-        # print('x','y',x, y,type(x),type(y))
         return cases[operator](x, y)
 
     def match_or_not(self, **kwargs):
-       return self.method_mapping(self.type)()
+        # print(self._type, self._comparsion, self._value)
+        return getattr(self, self.type)(**kwargs)
        
     def absolute_time(self, **kwargs):
         now = time()
@@ -51,7 +53,13 @@ class Condition():
         return self.compareWith(self.comparsion, int(now), int(time_condition))
 
     def relative_time(self, **kwargs):
+        project_start_time = kwargs['project_start_time']
+        task_start_time = kwargs['task_start_time']
+        delay_time = kwargs['delay_time']
         now = time()
+
+        time_diff = int(now - project_start_time - delay_time)
+        return self.compareWith(self.comparsion, time_diff, int(self._value))
     
     def device(self, **kwargs):
         print('device')

python/biopro/project/project.py

@@ -8,6 +8,7 @@ from datetime import datetime
 from collections import deque
 from biopro.device.manager import DeviceManager
 from biopro.text import *
+from copy import copy
 
 class Project(threading.Thread):
   def __init__(self, project, device_manager: DeviceManager, mqttThread = None, name="project"):
@@ -19,9 +20,8 @@ class Project(threading.Thread):
     self._start_time = None
 
     self._task_manager = TaskManager(self._project['taskList'])
+    self._stop = False
 
-    self._start_time = None
-    
   @property
   def desc(self) -> str:
     return self._project['desc']
@@ -45,34 +45,38 @@ class Project(threading.Thread):
   def run(self):
       self._start_time = time.time()
 
-      while True:
+      while not self._stop:
         # current task
-        for task in self._task_manager.get_check_task_list():
+        task_check_list = copy(self._task_manager.get_check_task_list())
+        delay_time = 0
+        for task in task_check_list:
           # [<match_condition>, ...]
-          match_condition_list = task.check_condition('time')
+          match_condition_list = task.check_condition(project_start_time = self._start_time, delay_time = delay_time)
           # [[<match_action>, ...], ...]
           match_action_list = task.get_match_action_list(match_condition_list)
           
           for action_list in match_action_list:
             for action in action_list:
               if action.type == 'start':
+                task.reset_start_time()
                 self._task_manager.set_current_task(task)
               task.do_action(action)
-              
+          
+          now = time.time()
           while len(task.instruction_list) > 0:
-            instruction = task.instruction_list.pop(0)
-            if instruction.get('device', None) != None:
-              device = self._device_manager.get_device(self.device[instruction['device']]['connectDevice']['device_address'])
+              instruction = task.instruction_list.pop(0)
+              if instruction.get('device', None) != None:
+                device = self._device_manager.get_device(self.device[instruction['device']]['connectDevice']['device_address'])
 
-              if device is None:
-                  raise RuntimeError(DEVICE_NOT_FOUND, device)
-                
-              # print(instruction['header'], *instruction['arguments'].values())
-              getattr(device, instruction['header'])(*instruction['arguments'].values()) 
+                if device is None:
+                    raise RuntimeError(DEVICE_NOT_FOUND, device)
 
+                getattr(device, instruction['header'])(*instruction['arguments'].values()) 
+          delay_time += (time.time() - now)
         time.sleep(self._time_interval)
+
   def stop(self):
-    return
+    self._stop = True
 
   def close(self):
-    return
+    self._stop = True

python/biopro/project/task.py

@@ -1,3 +1,4 @@
+from typing import List
 from .condition import Condition
 from .action import Action
 from time import time
@@ -6,8 +7,8 @@ class Task:
   def __init__(self, task):
     self._task = task
 
-    self._condition_list = []
-    self._action_list = []
+    self._condition_list:List[Condition] = []
+    self._action_list:List[Action] = []
 
     self._start_time = time()
     self._idle_time = []
@@ -16,7 +17,6 @@ class Task:
     self._last_time = None
 
     self._instruction_list = []
-
     self.setup()
   
   def setup(self) -> None:
@@ -105,6 +105,9 @@ class Task:
   @property
   def next(self) -> str:
     return self._task['next']
+  
+  def reset_start_time(self):
+    self._start_time = time()
     
   def get_parameter_set_by_device(self, device):
      return [parameter_set for parameter_set in self.parameter_set.values() if device == parameter_set['target']]
@@ -151,9 +154,6 @@ class Task:
     return map(lambda condition: [x for x in self._action_list if condition.id in x.get_condition_list()], match_condition_list)
 
   def do_action(self, action): 
-    # # match_action = [x for x in self._action_list if condition_id in x.get_condition_list()]
-
-    # for action in match_action:
     for instruction in action.get_instruction_list():
       self._instruction_list.append(instruction)
 
@@ -164,5 +164,6 @@ class Task:
     }
     return statuses[status]
 
-  def check_condition(self, type):
-    return [condition for condition in self._condition_list if  condition.match_or_not()]
+  def check_condition(self, **kwargs):
+    kwargs['task_start_time'] = self._start_time
+    return [condition for condition in self._condition_list if  condition.match_or_not(**kwargs)]

python/biopro/project/task_manager.py

@@ -1,5 +1,5 @@
 from json import loads as json_parse, dumps as _json_stringify
-from typing import Dict, Optional, Any
+from typing import Dict, List, Optional, Any
 from xml.dom.expatbuilder import parseString
 import paho.mqtt.client as mqtt
 from biopro.text import *
@@ -29,7 +29,7 @@ class TaskManager():
     def get_task(self, task_id):
       return self._task_list[task_id]
 
-    def get_check_task_list(self):
+    def get_check_task_list(self) -> List[Task]:
       return self._need_to_check_task_list
 
     def get_current_task(self) -> Task:

python/biopro/recording/file.py

@@ -1315,7 +1315,7 @@ class RecordingFileWriter:
                     self._time_now = int(t)
         return
     
-    @calculate_time(1)
+    # @calculate_time(1)
     def write(self, data: Union[bytes, RecordingData, List[bytes], List[RecordingData]], mqtt_thread) -> int:
         # check size
         ths = self.splitting_threshold_size

python/biopro/server/database.py

@@ -160,7 +160,7 @@ class DataBaseProcess(Process):
             getattr(self, do)(*args)
         return None
 
-    @calculate_time(1)
+    # @calculate_time(1)
     def data_meta_write(self, _data: JSON_OBJECT, device_id, _uuid = None, _id = None):
         if _id > 0:
             sql_str = 'UPDATE "public"."recording_data_metas" SET '
@@ -376,7 +376,7 @@ class DataBaseProcess(Process):
             print('recording error', e)
         return None
     
-    @calculate_time(1)
+    # @calculate_time(1)
     def data_raw_recording_new(self, _id_dict, _channel_list, _data_dict, _end_time_dict, _size_dict):
         try:
             para_list = []
@@ -446,7 +446,7 @@ class DataBaseProcess(Process):
 
         return True
     
-    @calculate_time(1)
+    # @calculate_time(1)
     def data_mini_recording_new(self, _id_dict, _channel_list, _data_mean_dict):
         try:
             para_list = []

python/biopro/server/recording.py

@@ -98,6 +98,11 @@ class RecordingProcess(Process):
         self._last_cnt = [-1, -1, -1, -1, -1, -1, -1, -1]
         self._wrong_cnt = 0
 
+        # elite data length
+        self._elite_data_len = 40
+        self._mem_header_len = 3
+        self._mem_tailer_len = 6
+        self._single_data_len = self._elite_data_len + self._mem_header_len + self._mem_tailer_len
 
     def ensure_data_format(self) -> DataDecodeFormat:
         if isinstance(self._data_format, (str, bytes)):
@@ -160,11 +165,11 @@ class RecordingProcess(Process):
         """
         q = None
         try:
-            now = time()
+            # now = time()
             q = self._queue_rec.get()
-            get_queue_time_cost = time() - now
-            if get_queue_time_cost > 1:
-                print('get queue cost time', get_queue_time_cost)
+            # get_queue_time_cost = time() - now
+            # if get_queue_time_cost > 2:
+            #     print('get queue cost time', get_queue_time_cost)
         except:
             return False
         finally:
@@ -190,7 +195,7 @@ class RecordingProcess(Process):
         current_time = time()
         if self._timer is not None:
             if current_time - self._timer > 1.5:
-                print('time, sync_data routine_time', current_time, current_time - self._timer)
+                print('time, sync_data routine_time', 'device:', self._device, datetime.now(), current_time, current_time - self._timer)
                 self._isTimeOut = True
         self._timer = current_time
 
@@ -290,6 +295,7 @@ class RecordingProcess(Process):
                     self._last_cnt[7] = head_counter - 1
                 last_data_cnt = self._last_cnt[7]
 
+            # dont save to section when head or id is wrong
             if (head != 255 or device_id != device):
                 save = False
                 last_data_cnt = last_data_cnt + 1
@@ -332,60 +338,57 @@ class RecordingProcess(Process):
 
         return save
 
-    def _check_jump_ram(self, raw_data: bytes, colum_now: int, colum_total: int, save: bool, device: int):
-        i = colum_now
+    def _check_jump_ram(self, raw_data: bytes, colum_now: int, colum_total: int, save: bool, device: int, data_len: int):
+        col = colum_now
+        save = False
 
-        if (raw_data[i][0] == 255 and raw_data[i][3] == device):
-            if colum_total < 3: 
-                print('this ram data < 3 records, need to fix, colum_total = ', colum_total)
-                if colum_total == 1:
-                    print('raw_data[0]', raw_data[0])
+        if raw_data[col][0] != 255 or raw_data[col][3] != device:
+            return save
 
-                elif colum_total == 2:
-                    print('raw_data[0]', raw_data[0])
-                    print('raw_data[1]', raw_data[1])
+        if colum_total == 1:
+            print('this ram data < 3 records, colum_total = ', colum_total)
+            print('raw_data[0]', raw_data[0])
+            return save
 
-            else:
+        elif colum_total == 2:
+            print('this ram data < 3 records, colum_total = ', colum_total)
+            print('raw_data[0]', raw_data[0])
+            print('raw_data[1]', raw_data[1])
+            if (raw_data[col + 1][1] - raw_data[col][1] == 1) or (raw_data[col][1] == 255 and raw_data[col + 1][1] == 0):
+                save = True
 
-                if((raw_data[i + 1][1] - raw_data[i][1] == 1 and raw_data[i + 2][1] - raw_data[i + 1][1] == 1) or
-                    (raw_data[i][1] == 255 and raw_data[i + 1][1] == 0 and raw_data[i + 2][1] == 1) or
-                    (raw_data[i][1] == 254 and raw_data[i + 1][1] == 255 and raw_data[i + 2][1] == 0)):
+        elif colum_total >= 3:
+            if (raw_data[col + 1][1] - raw_data[col][1] == 1 and raw_data[col + 2][1] - raw_data[col + 1][1] == 1) or\
+                (raw_data[col][1] == 255 and raw_data[col + 1][1] == 0 and raw_data[col + 2][1] == 1) or\
+                (raw_data[col][1] == 254 and raw_data[col + 1][1] == 255 and raw_data[col + 2][1] == 0):
+                save = True
 
-                    if ((raw_data[i][1] == 255 and raw_data[i + 1][1] == 0 and raw_data[i + 2][1] == 1) or
-                        (raw_data[i][1] == 254 and raw_data[i + 1][1] == 255 and raw_data[i + 2][1] == 0)):
-                        print('cnt = [254, 255, 0] or [255, 0, 1]')
+        if save == True:
+            self._skip_ram_cnt += 1
+            last_data_cnt = raw_data[col][1]
+            if (device == 4):
+                print('self._last_cnt[4]:', self._last_cnt[4], ', last_data_cnt:', last_data_cnt)
+            if (device == 5):
+                print('self._last_cnt[5]:', self._last_cnt[5], ', last_data_cnt:', last_data_cnt)
+            if (device == 6):
+                print('self._last_cnt[6]:', self._last_cnt[6], ', last_data_cnt:', last_data_cnt)
+            if (device == 7):
+                print('self._last_cnt[7]:', self._last_cnt[7], ', last_data_cnt:', last_data_cnt)
+                
+            print('skip RAM, but data is right, solve data', list(raw_data[col][0:3]),'|', list(raw_data[colum_total-1][0:3]), 'skip Ram', self._skip_ram_cnt, 'times \n')
 
-                    save = True
-                    self._skip_ram_cnt += 1
-                    last_data_cnt = raw_data[i][1]
-                    if (device == 4):
-                        print('self._last_cnt[4]:', self._last_cnt[4], ', last_data_cnt:', last_data_cnt)
-                    if (device == 5):
-                        print('self._last_cnt[5]:', self._last_cnt[5], ', last_data_cnt:', last_data_cnt)
-                    if (device == 6):
-                        print('self._last_cnt[6]:', self._last_cnt[6], ', last_data_cnt:', last_data_cnt)
-                    if (device == 7):
-                        print('self._last_cnt[7]:', self._last_cnt[7], ', last_data_cnt:', last_data_cnt)
-                        
-                    print('skip RAM, but data is right, solve data', list(raw_data[i][0:3]),'|', list(raw_data[colum_total-1][0:3]), 'skip Ram', self._skip_ram_cnt, 'times \n')
-                    # print('data:')
-                    # print('|', list(raw_data[0]))
-                    # print('|', list(raw_data[1]))
-                    # print('| ... ... ...')
-                    # print('| ... ... ...')
-                    # print('|', list(raw_data[colum_total-1]))
+            if (device == 4):
+                self._last_cnt[4] = last_data_cnt
 
-                    if (device == 4):
-                        self._last_cnt[4] = last_data_cnt
+            elif (device == 5):
+                self._last_cnt[5] = last_data_cnt
 
-                    elif (device == 5):
-                        self._last_cnt[5] = last_data_cnt
+            elif (device == 6):
+                self._last_cnt[6] = last_data_cnt
 
-                    elif (device == 6):
-                        self._last_cnt[6] = last_data_cnt
+            elif (device == 7):
+                self._last_cnt[7] = last_data_cnt
 
-                    elif (device == 7):
-                        self._last_cnt[7] = last_data_cnt
         return save
 
     def _neu_foreach_data_section(self, data: bytes):
@@ -500,54 +503,59 @@ class RecordingProcess(Process):
         :return:
         """
         raw_data = []
-        index = 0
-        elite_data_len = 40
-        mem_header_len = 3
-        mem_tailer_len = 8
-        single_data_len = elite_data_len + mem_header_len + mem_tailer_len
-        device = self._device
+        records = 0
         print_flag = False
+        device = self._device
+        single_data_len = self._single_data_len
+        mem_header_len = self._mem_header_len
 
         # packet section data use two microarray 
         for i in range(0, len(data), single_data_len):
-            index = index + 1
-            for j in range(index, index + 1):
-                raw_data.append(data[i : i + single_data_len])
-                
+            records = records + 1
+            raw_data.append(data[i : i + single_data_len])
+            if len(data[i : i + 10]) < 10:
+                print('data dont be package:', raw_data[records - 1], 'index:', records - 1)
+                del raw_data[records - 1]
+                records = records - 1
+
         # check cnt
-        for i in range(index):  
+        for i in range(records):
 
             # if jump cnt, don't save data      
             save = self._check_cnt(raw_data[i], device)
 
             # # if jump Ram, also can handle data
             if save == False:
-                save = self._check_jump_ram(raw_data, i, index, save, device)
+                save = self._check_jump_ram(raw_data, i, records, save, device, single_data_len)
                             
             if (save == True):
                 section = raw_data[i]
 
-                if (section[0 : mem_header_len] == section[single_data_len - 3: single_data_len]):
-                    section = section + b'\x00'
-                
-                else:
-                    section = section + b'\x01'
-                    print('header != tailer,', 
-                        list(section[0 : mem_header_len]), 
-                        list(section[single_data_len - 3: single_data_len]),
-                        'device:', device, ',', datetime.now())
+                check_sum = sum(section[0 : single_data_len - 1]) & 0b11111111
+
+                if (check_sum != section[single_data_len - 1]):
+                    print('check number not match,',
+                        list(section[0 : mem_header_len]), section[-1], '!=', check_sum, 'device:', device, ',', datetime.now())
                     if (i-1 >= 0):
-                        print('header != tailer', list(raw_data[i-1]), 'raw:', i-1)
-                    print('header != tailer', list(section), 'raw:', i)
-                    if (i+1 <= index):
-                        print('header != tailer', list(raw_data[i+1]), 'raw:', i+1, '\n')
-                
-                section = section[3:]
+                        print('check number not match', list(raw_data[i-1]), 'raw:', i-1)
+
+                    print('check number not match', list(raw_data[i]), 'raw:', i)
+                    
+                    if (i+1 <= records):
+                        print('check number not match', list(raw_data[i+1]), 'raw:', i+1, '\n')
+                    section = section + b'\x01'
+
+                    print('delete data:', list(raw_data[i][0:3]), 'raw:', i, '\n')
+                    continue
+                else:
+                    section = section + b'\x00'
+
+                # section = section[3:]
                 yield None, section
 
             else:
                 print_flag = True
-                print('delete data:', list(raw_data[i][0:3]), 'raw:', i+1, '\n')
+                print('delete data:', list(raw_data[i][0:3]), 'raw:', i, '\n')
 
         # if print_flag:
         #     print('delete data context:')