[update] fix hstia gain

python/biopro/device/device_cc2650.py

@@ -662,7 +662,7 @@ class CC2650Device(Device):
         elif device_type == 'EISZeroOne':
             i = 0
             request_times = 0
-            while i < 7:
+            while i < 13:
                 try:
                     # send
                     code = self._encode_instruction(DeviceInstruction.TYP_CIS, DeviceInstruction.CIS_CALI, i)

python/biopro/devlib/data.py

@@ -1,6 +1,7 @@
 import abc
 import struct
 import math
+import numpy
 from typing import Optional, TypeVar, Generic, Tuple, Dict, List, AnyStr
 from datetime import datetime
 
@@ -1345,8 +1346,8 @@ class EISZeroOneDataDecoder(RecDataDecoder):
     __slots__ = ('_message', '_cycle_number', '_start_return_data', '_time_stamp',
                  '_total_time_stamp', '_mode', '_cycle_start_time',
                  '_mode_stop', '_last_time_stamp', '_last_delta', '_cali_coeff',
-                 'cali_coeff', '_ac_amp', '_mode', '_freq_start', '_freq_stop',
-                 '_freq_direction', '_last_phase', '_first_phase_flag', '_show_data')
+                 'cali_coeff', '_ac_amp', '_mode',
+                 '_last_phase', '_first_phase_flag', '_show_data')
 
     def __init__(self, cali_coeff: bytes = None):
         super().__init__()
@@ -1361,9 +1362,6 @@ class EISZeroOneDataDecoder(RecDataDecoder):
         self._cycle_start_time = []
         self._ac_amp: int = 0
         self._mode: int = 0
-        self._freq_start: int = 0
-        self._freq_stop: int = 0
-        self._freq_direction = 0
         self._last_phase = 0
         self._first_phase_flag = 1
 
@@ -1380,12 +1378,27 @@ class EISZeroOneDataDecoder(RecDataDecoder):
     def _decode_cali_coeff(cali_coeff: bytes) -> Optional[List[Tuple[int, int]]]:
         if cali_coeff != b'':
             cali_table = []
-            phase_para_a = []
-            phase_para_b = []
             hsrtia_a = []
             hsrtia_b = []
             hsrtia_c = []
             hsrtia_d = []
+            phase_coeff = []
+            phase_offset = []
+            
+            # phase_coeff = [[0]*4 for i in range(4)]
+            # phase_offset = [[0]*4 for i in range(4)]
+
+            phase_coeff = numpy.zeros([4, 4], dtype = int)
+            phase_offset = numpy.zeros([4, 4], dtype = int)  
+
+            ########################################
+            # phase_coeff
+            # [[gain0, g1, g2, g3] ----->最高頻
+            #  [gain0, g1, g2, g3] ----->中頻
+            #  [gain0, g1, g2, g3] ----->低頻
+            #  [gain0, g1, g2, g3] ----->最低頻
+            # ]
+            #######################################
 
             # print('cali_coeff', cali_coeff)
             cutoff_freq = struct.unpack('>I', cali_coeff[1:5])[0] * 100     #4
@@ -1396,51 +1409,95 @@ class EISZeroOneDataDecoder(RecDataDecoder):
             # hsrtia_160k = struct.unpack('>I', cali_coeff[8:12])[0]         #4
 
             index = 20
-            for i in range(index, index+16, 8):
-                phase_para_a.append(struct.unpack('>i', cali_coeff[i+1:i+5])[0])
-                phase_para_b.append(struct.unpack('>i', cali_coeff[i+5:i+9])[0])
-
+            g = 0
+            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
             index = 40
-            for i in range(index, index+16, 8):
-                phase_para_a.append(struct.unpack('>i', cali_coeff[i+1:i+5])[0])
-                phase_para_b.append(struct.unpack('>i', cali_coeff[i+5:i+9])[0]) 
-
+            g = 0
+            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
             #Lv[0] 160k
             index = 60
             hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
             hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
-            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0]/1e4)
+            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0])
 
             #Lv[1] 20k
             index = 80
             hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
             hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
-            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0]/1e4)
+            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0])
 
             #Lv[2] 5k
             index = 100
             hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
             hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
-            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0]/1e4)
+            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0])
 
             #Lv[3] 200R
             index = 120
             hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
             hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
-            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0]/1e4)
+            hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0])
 
-            # hsrtia_a.append(struct.unpack('>I', cali_coeff[index+1:index+5])[0])
-            # hsrtia_b.append(struct.unpack('>I', cali_coeff[index+5:index+9])[0]/1e6)
-            # hsrtia_c.append(struct.unpack('>I', cali_coeff[index+9:index+13])[0]/1e5)
+            index = 140
+            g = 1
+            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            index = 160
+            g = 1
+            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            index = 180
+            g = 2
+            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            index = 200
+            g = 2
+            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            index = 220
+            g = 3
+            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            index = 240
+            g = 3
+            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
 
             # print('cutoff_freq', cutoff_freq)
             # print('hsrtia_a', hsrtia_a)
             # print('hsrtia_b', hsrtia_b)
             # print('hsrtia_c', hsrtia_c)
-            # print('phase_para_a', phase_para_a)
-            # print('phase_para_b', phase_para_b)
+            # print('phase_coeff')
+            # print(phase_coeff)
+            # print('phase_offset')
+            # print(phase_offset)
 
-            cali_table.append((cutoff_freq, phase_para_a, phase_para_b, hsrtia_a, hsrtia_b, hsrtia_c, hsrtia_d))
+            cali_table.append((cutoff_freq, phase_coeff, phase_offset, hsrtia_a, hsrtia_b, hsrtia_c, hsrtia_d))
 
             return cali_table
         else:
@@ -1470,7 +1527,7 @@ class EISZeroOneDataDecoder(RecDataDecoder):
         time_stamp: float = struct.unpack('<I', data[13+3:17+3])[0]  # unit: ms
         cycle_number = struct.unpack('>H', data[17+3:19+3])[0]
         d19 = data[19+3]
-        gain = (d19 & 0x0F)
+        gain = data[20+3]
         finishMode = (d19 & 0x80) >> 7        
         
         if time_stamp == 0:
@@ -1490,30 +1547,31 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                 return None
             else:
                 if self.cali_coeff is not None and self._mode == 0:
-                    phase_para_a = []
-                    phase_para_b = []
                     hsrtia_a = []
                     hsrtia_b = []
                     hsrtia_c = []
                     hsrtia_d = []
-                    cutoff_freq, phase_para_a, phase_para_b, hsrtia_a, hsrtia_b, hsrtia_c, hsrtia_d = self.cali_coeff[0]
+                    cutoff_freq, phase_coeff, phase_offset, hsrtia_a, hsrtia_b, hsrtia_c, hsrtia_d = self.cali_coeff[0]
+
                     voltage_amp = round(self._ac_amp * 800 / 2047) # use UI value
-                    if (self._freq_start > self._freq_stop):
-                        self._freq_direction = 0
-                    else:
-                        self._freq_direction = 1
 
                 if (self._mode == 0):
                     img = ch1
                     real = ch2
                     freq = ch3
+                    fre_idx = 0
 
-                    voltage_mag = math.sqrt(img ** 2 + real ** 2) * (1 + freq ** 2 / cutoff_freq ** 2)
+                    rolloff_cali = cutoff_freq/1e5
+                    voltage_mag = math.sqrt(img ** 2 + real ** 2) * (1 + freq ** 2 /  rolloff_cali ** 2 / 1e4)
 
                     # if (gain == 3):
                     #     current = hsrtia_a[gain] * math.exp(hsrtia_b[gain] * voltage_mag) + hsrtia_c[gain] * math.exp(hsrtia_d[gain] * voltage_mag)
                     # else:
-                    current = voltage_mag ** 2 * hsrtia_a[gain] + voltage_mag * hsrtia_b[gain] + hsrtia_c[gain]
+                    
+                    current = voltage_mag ** 2 * hsrtia_a[gain] + voltage_mag * hsrtia_b[gain]
+                    # current = voltage_mag ** 2 * hsrtia_a[gain] + voltage_mag * hsrtia_b[gain] + hsrtia_c[gain]
+                    
+
                     # print(current)
                     # print(voltage_mag)
                     # print(hsrtia_a[gain])
@@ -1529,13 +1587,13 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                     raw_phase = math.atan2(img , real) * 180 / math.pi
 
                     if (freq >= 1000000): # 10000 Hz
-                        i = 0
+                        fre_idx = 0
                     elif (freq >= 10000): # 100 Hz
-                        i = 1
+                        fre_idx = 1
                     elif (freq >= 1000): # 10 Hz
-                        i = 2
+                        fre_idx = 2
                     elif (freq >= 1): # 0.01 Hz
-                        i = 3
+                        fre_idx = 3
                     
                     ideal_raw_phase = phase_coeff[gain][fre_idx] /1e10 * freq + phase_offset[gain][fre_idx] / 1e6
                     phase = raw_phase - ideal_raw_phase
@@ -1571,7 +1629,7 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                             '|', '{:5}'.format(round(current, 3)),
                             '|', '{:1}'.format(gain),
                             '|', '{:1}'.format(finishMode),
-                            '@', str(self.device), '|')
+                            '@', str(self.device), '|', flush = True)
                         pass
                     else:
                         print('|', '{:10}'.format(time_stamp),
@@ -1582,7 +1640,7 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                             '|', '{:5}'.format(cycle_number),
                             '|', '{:1}'.format(gain),
                             '|', '{:1}'.format(finishMode),
-                            '@', str(self.device), '|')
+                            '@', str(self.device), '|', flush = True)
                         pass
 
         if finishMode == True:

python/biopro/impl/ext_mem.py

@@ -35,7 +35,7 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
                  '_pin_ram_sel_value', '_pin_mem_sel_value', '_pin_mem_req_value',
                  '_read_green_times','_read_red_times',
                  '_elite_data_len', '_mem_header_len', '_mem_tailer_len', '_single_data_len',
-                 '_head_wrong_cnt')
+                 '_head_wrong_cnt', '_pin_busy_value')
 
     def __init__(self,
                  select: Selector,
@@ -50,11 +50,11 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
         self._single_data_len = self._elite_data_len + self._mem_header_len + self._mem_tailer_len
 
         # buffer
-        self._tx_buffer_header = [0] * 19
+        self._tx_buffer_header = [0] * 64
         self._tx_buffer_data = [0] * (self._single_data_len * 10 + 3)
 
         # memory control pin
-        self.pin_busy = OutputPin.get_used(P3Pin.MEM_BZY, True)
+        self.pin_busy: Optional[InputPin] = InputPin.get_used(P3Pin.MEM_BZY)
         self.pin_mem_req = OutputPin.get_used(P3Pin.MEM_REQ, False)
         self.pin_mem_sel = OutputPin.get_used(P3Pin.MEM_RST, True) # MEM_RST -> actually which memory board is assign
         self.pin_ram_sel: Optional[InputPin] = InputPin.get_used(P3Pin.MEM_SEL) # MEM_SEL -> actually is RAM_SEL, which RAM is assign
@@ -62,6 +62,7 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
         self._pin_ram_sel_value = [bool(self.pin_ram_sel) for _ in range(Selector.SIZE)]
         self._pin_mem_sel_value = [bool(self.pin_mem_sel) for _ in range(Selector.SIZE)]
         self._pin_mem_req_value = [bool(self.pin_mem_req) for _ in range(Selector.SIZE)]
+        self._pin_busy_value = [bool(self.pin_busy) for _ in range(Selector.SIZE)]
 
         self._read_green_times = 0
         self._read_red_times = 0
@@ -98,6 +99,14 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
             self._pin_ram_sel_value[channel] = True
         return self._pin_ram_sel_value[channel]
 
+    def get_pin_busy(self):
+        channel = self.select
+        if self.pin_busy.input() == 0:
+            self._pin_busy_value[channel] = False
+        else:
+            self._pin_busy_value[channel] = True
+        return self._pin_busy_value[channel]
+
     @property
     def select(self) -> int:
         return self._selector.channel
@@ -216,7 +225,9 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
         return
 
     def recv_memory(self, device: int) -> Optional[bytes]:
-        self.pin_busy.output(False)
+        # self.pin_busy.output(False)
+
+        # print('mem_req==ram_sel,[', self._pin_mem_req_value[device], ',', self._pin_ram_sel_value[device], ']')
 
         rx = []
 
@@ -300,6 +311,9 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
                 print("green data print:", data, device, datetime.now())
                 return None
 
+            # print('data=', list(data))
+            # print('Ram:', data[62])
+
             if (length >= 4000):
                 flag_print = True
                 print("green data: big length:", length)
@@ -415,9 +429,9 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
         except BaseException as e:
             print(e)
 
-        finally:
-            # print("\n")
-            self.pin_busy.output(True)
+        # finally:
+        #     # print("\n")
+        #     self.pin_busy.output(True)
 
         return bytes(rx)
 

python/biopro/project/project.py

@@ -227,8 +227,10 @@ class Project(threading.Thread):
                     if action.type == 'start':
                       self._count += 1
                     for instruction in instruction_set:
+                      print('instruction 1', device, instruction, datetime.now())
                       args = list(map(lambda arg: task_info[arg], instruction['arguments']))
                       target=getattr(device, instruction['method'])(*args)
+                      print('instruction 2', device, instruction, datetime.now())
             
             delay_time += (time() - now)
 

python/biopro/server/data.py

@@ -646,6 +646,7 @@ class DataServer(SocketServer, DataAPI):
     def whether_to_record(self, device):
         # if user click "start", return True; if user click "stop", return False;
         if device in self._configurations.keys() and self._configurations[device] is not None:
+            # print(self._configurations.keys(), ',', device, datetime.now())
             return True
         else:
             return False
@@ -654,6 +655,9 @@ class DataServer(SocketServer, DataAPI):
         ret = False
         sync = self.get_spi_obj()
 
+        busy = sync.get_pin_busy()
+        # print('pin_busy=', busy, device, datetime.now())
+
         if sync.get_pin_mem_req() == sync.get_pin_ram_sel():
             spi_data = sync.recv_memory(device)
             signal = sync.get_pin_mem_req()
@@ -662,6 +666,7 @@ class DataServer(SocketServer, DataAPI):
 
         else:
             data = None
+            print('data=None, mem_req!=ram_sel, [', sync.get_pin_mem_req(), ', ', sync.get_pin_ram_sel(), ']', device, datetime.now())
 
         if data is not None:
             if self._configurations.get(device, None) != None:

python/biopro/server/recording.py

@@ -155,9 +155,7 @@ class RecordingProcess(Process):
         elif isinstance(decoder, EISZeroOneDataDecoder):
             # get amp_gain from meta file
             decoder._mode = self._meta_file.configuration.get_parameter('MODE')
-            decoder._ac_amp = self._meta_file.configuration.get_parameter('AC_AMP')
-            decoder._freq_start = self._meta_file.configuration.get_parameter('FREQ_START')
-            decoder._freq_stop = self._meta_file.configuration.get_parameter('FREQ_STOP')
+            decoder._ac_amp = self._meta_file.configuration.get_parameter('EIS_AC_AMP')
 
         return decoder
 

python/biopro/util/socket.py

@@ -93,7 +93,7 @@ class SocketClient(metaclass=abc.ABCMeta):
         if self._socket is None:
             try:
                 self._socket = Socket(AF_UNIX, SOCK_STREAM)
-                self._socket.settimeout(3)
+                self._socket.settimeout(5)
                 self._socket.connect(self._socket_file)
             except Exception as e:
                 print('open_socket error:', e)

python/res/devlib/json/Elite_EIS_1.0.devlib.json

@@ -9,7 +9,7 @@
     "minor_version_number": 0
   },
   "constant": {
-    "FREQ_MAX": 4294967296,
+    "FREQ_MAX": 13333334,
     "VOLT_MAX": 65536,
     "BLE_WRITE_MAX": 255,
     "TIME_MAX": 100000
@@ -32,12 +32,6 @@
       "domain": "property",
       "value": "[0, 1, 2]"
     },
-    "CHANNEL_LABEL": {
-      "description": "channel label",
-      "record_meta": true,
-      "domain": "property",
-      "value": "['current', 'voltage', 'impedance']"
-    },
     "SAMPLE_RATE": {
       "description": "data sampling rate",
       "record_meta": true,
@@ -63,11 +57,45 @@
         "EIS CURVE",
         "Cyclic Voltammetry",
         "Chronoamperometric",
+        "V-T Graph",
+        "R-T Graph",
         "Dev Mode"
       ]
     },
-    "FREQ": {
-      "description": "DPV current recording period start",
+    "GENERAL_HS_RTIA": {
+      "description": "High speed rtia gain",
+      "record_meta": true,
+      "initial": 4,
+      "value": [
+        0,
+        1,
+        2,
+        3,
+        4
+      ],
+      "on_change": "set_general_hs_rtia"
+    },
+    "EIS_DC_BIAS": {
+      "description": "DC voltage bias",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "EIS_AC_AMP": {
+      "description": "AC Amplitude",
+      "record_meta": true,
+      "initial": 25,
+      "domain": [
+        2048
+      ]
+    },
+    "EIS_FREQ": {
+      "description": "[start, stop] of frequency scan",
       "record_meta": true,
       "initial": [
         13333333,
@@ -80,29 +108,24 @@
       },
       "value": "VALUE"
     },
-    "FREQ_START": {
-      "description": "Start of Freq Scan",
+    "EIS_PPD": {
+      "description": "Point per decades",
       "record_meta": true,
-      "initial": 13422819,
+      "initial": 10,
       "domain": [
-        "FREQ_MAX"
-      ],
-      "value": {
-        "expression": "VALUE"
-      }
+        11
+      ]
     },
-    "FREQ_STOP": {
-      "description": "End of Freq Scan",
+    "EIS_SCALE": {
+      "description": "Point spacing pattern",
       "record_meta": true,
-      "initial": 7,
-      "domain": [
-        "FREQ_MAX"
-      ],
-      "value": {
-        "expression": "VALUE"
-      }
+      "initial": 0,
+      "value": [
+        0,
+        1
+      ]
     },
-    "DELAY": {
+    "EIS_DELAY": {
       "description": "Wait x peroid before start taking measurements",
       "record_meta": true,
       "initial": 0,
@@ -113,65 +136,18 @@
         "expression": "VALUE"
       }
     },
-    "AVERAGE_NUM": {
+    "EIS_AVERAGE_NUM": {
       "description": "Number of sample used for average funciton",
       "record_meta": true,
       "initial": 8,
       "value": [
         2,
         4,
-        8,
-        16
-      ]
-    },
-    "DC_BIAS": {
-      "description": "DC voltage bias in mV",
-      "record_meta": true,
-      "initial": 25000,
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": {
-        "expression": "VALUE"
-      }
-    },
-    "AC_AMP": {
-      "description": "AC Amplitude in mV",
-      "record_meta": true,
-      "initial": 25,
-      "domain": [
-        2048
-      ]
-    },
-    "SCALE": {
-      "description": "Point spacing pattern",
-      "record_meta": true,
-      "initial": 0,
-      "value": [
-        0,
-        1
-      ]
-    },
-    "PPD": {
-      "description": "Point per decades",
-      "record_meta": true,
-      "initial": 10,
-      "domain": [
-        11
-      ]
-    },
-    "RTIA": {
-      "description": "High speed tia gain",
-      "record_meta": true,
-      "initial": 4,
-      "value": [
-        0,
-        1,
-        2,
-        3,
-        4
+        6,
+        8
       ]
     },
+
     "ADC_VALUE_I": {
       "description": "ADC value current value",
       "domain": "int"
@@ -219,8 +195,7 @@
         "1",
         "2",
         "auto"
-      ],
-      "on_change": "set_adc_gain_Vin"
+      ]
     },
     "VOLT_INITIAL": {
       "description": "Initial Voltage of Scan",
@@ -277,6 +252,29 @@
         "expression": "VALUE"
       }
     },
+    "MEASURE_VIN_RANGE": {
+      "description": "measure range of Vin",
+      "record_meta": true,
+      "initial": 0,
+      "value": [
+        "0",
+        "1",
+        "2",
+        "auto"
+      ]
+    },
+    "RT_VOLT_SET": {
+      "description": "DAC output Voltage",
+      "record_meta": true,
+      "initial": 37500,
+      "domain": [
+        65536
+      ],
+      "value": {
+        "expression": "VALUE"
+      },
+      "on_change": "set_para_RT_VOLT_SET"
+    },
     "BLE_WRITE": {
       "description": "send msg to elite",
       "domain": {
@@ -307,15 +305,11 @@
       {
         "expression": "MODE",
         "when": {
+          "0": "set_general_hs_rtia",
           "1": "set_adc_gain_I",
-          "2": "set_adc_gain_I"
-        }
-      },
-      {
-        "expression": "MODE",
-        "when": {
-          "1": "set_adc_gain_Vin",
-          "2": "set_adc_gain_Vin"
+          "2": "set_adc_gain_I",
+          "3": "set_adc_gain_I",
+          "4": "set_adc_gain_I"
         }
       },
       {
@@ -323,7 +317,9 @@
         "when": {
           "0": "curve_eis",
           "1": "curve_cv3",
-          "2": "curve_const_vscan"
+          "2": "curve_const_vscan",
+          "3": "curve_vt",
+          "4": "curve_rt"
         }
       },
       {
@@ -333,6 +329,12 @@
           "1": "curve_cv3_para2"
         }
       },
+      {
+        "expression": "MODE",
+        "when": {
+          "0": "curve_eis_mode"
+        }
+      },
       "_sync(True)",
       "VIS_STI"
     ],
@@ -350,6 +352,12 @@
     "data_format_cali": [
       "_data_format_cali('EISZeroOne')"
     ],
+    "set_general_hs_rtia": {
+      "type": "RIS",
+      "data": [
+        "1XFF;1X70;1B>GENERAL_HS_RTIA"
+      ]
+    },
     "set_sample_rate": {
       "type": "RIS",
       "parameter": {
@@ -365,12 +373,6 @@
         "XE1;X05;B>ADC_LEVEL_I_15"
       ]
     },
-    "set_adc_gain_Vin": {
-      "type": "RIS",
-      "data": [
-        "XE1;X06;B>ADC_LEVEL_V_IN_15"
-      ]
-    },
     "set_ctrl_highZ": {
       "type": "RIS",
       "data": [
@@ -380,35 +382,41 @@
     "curve_eis": {
       "type": "RIS",
       "parameter": {
-        "fa": "FREQ[0]",
-        "fb": "FREQ[1]",
-        "dp": "DELAY",
-        "dc": "DC_BIAS",
-        "am": "AC_AMP",
-        "an": "AVERAGE_NUM",
-        "rt": "RTIA",
-        "pp": "PPD",
-        "sp": "SCALE"
+        "fa": "EIS_FREQ[0]",
+        "fb": "EIS_FREQ[1]",
+        "dp": "EIS_DELAY",
+        "dc": "EIS_DC_BIAS",
+        "am": "EIS_AC_AMP",
+        "an": "EIS_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "EIS_PPD",
+        "sp": "EIS_SCALE"
       },
       "data": [
-        "1XD1;1X01;4B>fa;4B>fb;2B>dp"
+        "1X12;1X01;4B>fa;4B>fb;2B>dp"
       ]
     },
     "curve_eis_para2": {
       "type": "RIS",
       "parameter": {
-        "fa": "FREQ[0]",
-        "fb": "FREQ[1]",
-        "dp": "DELAY",
-        "dc": "DC_BIAS",
-        "am": "AC_AMP",
-        "an": "AVERAGE_NUM",
-        "rt": "RTIA",
-        "pp": "PPD",
-        "sp": "SCALE"
+        "fa": "EIS_FREQ[0]",
+        "fb": "EIS_FREQ[1]",
+        "dp": "EIS_DELAY",
+        "dc": "EIS_DC_BIAS",
+        "am": "EIS_AC_AMP",
+        "an": "EIS_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "EIS_PPD",
+        "sp": "EIS_SCALE"
       },
       "data": [
-        "1XD1;1X02;2B>dc;2B>am;B>an;B>rt;2B>pp;B>sp"
+        "1X12;1X02;2B>dc;2B>am;B>an;B>rt;2B>pp;B>sp"
+      ]
+    },
+    "curve_eis_mode": {
+      "type": "RIS",
+      "data": [
+        "1X12;1XFF"
       ]
     },
     "curve_cv3": {
@@ -422,7 +430,7 @@
         "cn": "CYCLE_NUMBER"
       },
       "data": [
-        "1XD2;1X01;2B>va;2B>vb;2B>vc;"
+        "1X09;1X01;2B>va;2B>vb;2B>vc;"
       ]
     },
     "curve_cv3_para2": {
@@ -436,7 +444,7 @@
         "cn": "CYCLE_NUMBER"
       },
       "data": [
-        "1XD2;1X02;4B>ve;2B>vf;2B>cn"
+        "1X09;1X02;4B>ve;2B>vf;2B>cn"
       ]
     },
     "curve_const_vscan": {
@@ -449,13 +457,53 @@
         "pe": "SAMPLE_RATE"
       },
       "data": [
-        "1XD3;",
+        "1X0B;",
         "2B>va;",
         "4b>pa;4b>pb;",
         "4b>0;4b>pd;",
         "2B>pe"
       ]
     },
+    "curve_rt": {
+      "type": "RIS",
+      "parameter": {
+        "va": "RT_VOLT_SET",
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE"
+      },
+      "data": [
+        "X04;",
+        "2B>va;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe"
+      ]
+    },
+    "curve_vt": {
+      "type": "RIS",
+      "parameter": {
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE",
+        "va": "MEASURE_VIN_RANGE"
+      },
+      "data": [
+        "X05;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe;",
+        "1B>va"
+      ]
+    },
+    "set_para_RT_VOLT_SET": {
+      "type": "RIS",
+      "data": [
+        "XE2;X01;2B>RT_VOLT_SET"
+      ]
+    },
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"

python/res/devlib/json/Elite_EIS_1.1.devlib.json

@@ -9,7 +9,7 @@
     "minor_version_number": 1
   },
   "constant": {
-    "FREQ_MAX": 4294967296,
+    "FREQ_MAX": 13333334,
     "VOLT_MAX": 65536,
     "BLE_WRITE_MAX": 255,
     "TIME_MAX": 100000
@@ -32,12 +32,6 @@
       "domain": "property",
       "value": "[0, 1, 2]"
     },
-    "CHANNEL_LABEL": {
-      "description": "channel label",
-      "record_meta": true,
-      "domain": "property",
-      "value": "['current', 'voltage', 'impedance']"
-    },
     "SAMPLE_RATE": {
       "description": "data sampling rate",
       "record_meta": true,
@@ -64,14 +58,47 @@
         "Cyclic Voltammetry",
         "Chronoamperometric",
         "V-T Graph",
+        "R-T Graph",
         "Dev Mode"
       ]
     },
-    "FREQ": {
-      "description": "DPV current recording period start",
+    "GENERAL_HS_RTIA": {
+      "description": "High speed rtia gain",
+      "record_meta": true,
+      "initial": 4,
+      "value": [
+        0,
+        1,
+        2,
+        3,
+        4
+      ],
+      "on_change": "set_general_hs_rtia"
+    },
+    "EIS_DC_BIAS": {
+      "description": "DC voltage bias",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "EIS_AC_AMP": {
+      "description": "AC Amplitude",
+      "record_meta": true,
+      "initial": 25,
+      "domain": [
+        2048
+      ]
+    },
+    "EIS_FREQ": {
+      "description": "[start, stop] of frequency scan",
       "record_meta": true,
       "initial": [
-        13422819,
+        13333333,
         7
       ],
       "domain": {
@@ -81,29 +108,24 @@
       },
       "value": "VALUE"
     },
-    "FREQ_START": {
-      "description": "Start of Freq Scan",
+    "EIS_PPD": {
+      "description": "Point per decades",
       "record_meta": true,
-      "initial": 13422819,
+      "initial": 10,
       "domain": [
-        "FREQ_MAX"
-      ],
-      "value": {
-        "expression": "VALUE"
-      }
+        11
+      ]
     },
-    "FREQ_STOP": {
-      "description": "End of Freq Scan",
+    "EIS_SCALE": {
+      "description": "Point spacing pattern",
       "record_meta": true,
-      "initial": 7,
-      "domain": [
-        "FREQ_MAX"
-      ],
-      "value": {
-        "expression": "VALUE"
-      }
+      "initial": 0,
+      "value": [
+        0,
+        1
+      ]
     },
-    "DELAY": {
+    "EIS_DELAY": {
       "description": "Wait x peroid before start taking measurements",
       "record_meta": true,
       "initial": 0,
@@ -114,65 +136,18 @@
         "expression": "VALUE"
       }
     },
-    "AVERAGE_NUM": {
+    "EIS_AVERAGE_NUM": {
       "description": "Number of sample used for average funciton",
       "record_meta": true,
       "initial": 8,
       "value": [
         2,
         4,
-        8,
-        16
-      ]
-    },
-    "DC_BIAS": {
-      "description": "DC voltage bias in mV",
-      "record_meta": true,
-      "initial": 25000,
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": {
-        "expression": "VALUE"
-      }
-    },
-    "AC_AMP": {
-      "description": "AC Amplitude in mV",
-      "record_meta": true,
-      "initial": 25,
-      "domain": [
-        2048
-      ]
-    },
-    "SCALE": {
-      "description": "Point spacing pattern",
-      "record_meta": true,
-      "initial": 0,
-      "value": [
-        0,
-        1
-      ]
-    },
-    "PPD": {
-      "description": "Point per decades",
-      "record_meta": true,
-      "initial": 10,
-      "domain": [
-        11
-      ]
-    },
-    "RTIA": {
-      "description": "High speed tia gain",
-      "record_meta": true,
-      "initial": 4,
-      "value": [
-        0,
-        1,
-        2,
-        3,
-        4
+        6,
+        8
       ]
     },
+
     "ADC_VALUE_I": {
       "description": "ADC value current value",
       "domain": "int"
@@ -220,8 +195,7 @@
         "1",
         "2",
         "auto"
-      ],
-      "on_change": "set_adc_gain_Vin"
+      ]
     },
     "VOLT_INITIAL": {
       "description": "Initial Voltage of Scan",
@@ -289,6 +263,18 @@
         "auto"
       ]
     },
+    "RT_VOLT_SET": {
+      "description": "DAC output Voltage",
+      "record_meta": true,
+      "initial": 37500,
+      "domain": [
+        65536
+      ],
+      "value": {
+        "expression": "VALUE"
+      },
+      "on_change": "set_para_RT_VOLT_SET"
+    },
     "BLE_WRITE": {
       "description": "send msg to elite",
       "domain": {
@@ -319,17 +305,11 @@
       {
         "expression": "MODE",
         "when": {
+          "0": "set_general_hs_rtia",
           "1": "set_adc_gain_I",
           "2": "set_adc_gain_I",
-          "3": "set_adc_gain_I"
-        }
-      },
-      {
-        "expression": "MODE",
-        "when": {
-          "1": "set_adc_gain_Vin",
-          "2": "set_adc_gain_Vin",
-          "3": "set_adc_gain_Vin"
+          "3": "set_adc_gain_I",
+          "4": "set_adc_gain_I"
         }
       },
       {
@@ -338,7 +318,8 @@
           "0": "curve_eis",
           "1": "curve_cv3",
           "2": "curve_const_vscan",
-          "3": "curve_vt"
+          "3": "curve_vt",
+          "4": "curve_rt"
         }
       },
       {
@@ -348,6 +329,12 @@
           "1": "curve_cv3_para2"
         }
       },
+      {
+        "expression": "MODE",
+        "when": {
+          "0": "curve_eis_mode"
+        }
+      },
       "_sync(True)",
       "VIS_STI"
     ],
@@ -365,6 +352,12 @@
     "data_format_cali": [
       "_data_format_cali('EISZeroOne')"
     ],
+    "set_general_hs_rtia": {
+      "type": "RIS",
+      "data": [
+        "1XFF;1X70;1B>GENERAL_HS_RTIA"
+      ]
+    },
     "set_sample_rate": {
       "type": "RIS",
       "parameter": {
@@ -380,12 +373,6 @@
         "XE1;X05;B>ADC_LEVEL_I_15"
       ]
     },
-    "set_adc_gain_Vin": {
-      "type": "RIS",
-      "data": [
-        "XE1;X06;B>ADC_LEVEL_V_IN_15"
-      ]
-    },
     "set_ctrl_highZ": {
       "type": "RIS",
       "data": [
@@ -395,35 +382,41 @@
     "curve_eis": {
       "type": "RIS",
       "parameter": {
-        "fa": "FREQ[0]",
-        "fb": "FREQ[1]",
-        "dp": "DELAY",
-        "dc": "DC_BIAS",
-        "am": "AC_AMP",
-        "an": "AVERAGE_NUM",
-        "rt": "RTIA",
-        "pp": "PPD",
-        "sp": "SCALE"
+        "fa": "EIS_FREQ[0]",
+        "fb": "EIS_FREQ[1]",
+        "dp": "EIS_DELAY",
+        "dc": "EIS_DC_BIAS",
+        "am": "EIS_AC_AMP",
+        "an": "EIS_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "EIS_PPD",
+        "sp": "EIS_SCALE"
       },
       "data": [
-        "1XD1;1X01;4B>fa;4B>fb;2B>dp"
+        "1X12;1X01;4B>fa;4B>fb;2B>dp"
       ]
     },
     "curve_eis_para2": {
       "type": "RIS",
       "parameter": {
-        "fa": "FREQ[0]",
-        "fb": "FREQ[1]",
-        "dp": "DELAY",
-        "dc": "DC_BIAS",
-        "am": "AC_AMP",
-        "an": "AVERAGE_NUM",
-        "rt": "RTIA",
-        "pp": "PPD",
-        "sp": "SCALE"
+        "fa": "EIS_FREQ[0]",
+        "fb": "EIS_FREQ[1]",
+        "dp": "EIS_DELAY",
+        "dc": "EIS_DC_BIAS",
+        "am": "EIS_AC_AMP",
+        "an": "EIS_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "EIS_PPD",
+        "sp": "EIS_SCALE"
       },
       "data": [
-        "1XD1;1X02;2B>dc;2B>am;B>an;B>rt;2B>pp;B>sp"
+        "1X12;1X02;2B>dc;2B>am;B>an;B>rt;2B>pp;B>sp"
+      ]
+    },
+    "curve_eis_mode": {
+      "type": "RIS",
+      "data": [
+        "1X12;1XFF"
       ]
     },
     "curve_cv3": {
@@ -437,7 +430,7 @@
         "cn": "CYCLE_NUMBER"
       },
       "data": [
-        "1XD2;1X01;2B>va;2B>vb;2B>vc;"
+        "1X09;1X01;2B>va;2B>vb;2B>vc;"
       ]
     },
     "curve_cv3_para2": {
@@ -451,7 +444,7 @@
         "cn": "CYCLE_NUMBER"
       },
       "data": [
-        "1XD2;1X02;4B>ve;2B>vf;2B>cn"
+        "1X09;1X02;4B>ve;2B>vf;2B>cn"
       ]
     },
     "curve_const_vscan": {
@@ -464,7 +457,24 @@
         "pe": "SAMPLE_RATE"
       },
       "data": [
-        "1XD3;",
+        "1X0B;",
+        "2B>va;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe"
+      ]
+    },
+    "curve_rt": {
+      "type": "RIS",
+      "parameter": {
+        "va": "RT_VOLT_SET",
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE"
+      },
+      "data": [
+        "X04;",
         "2B>va;",
         "4b>pa;4b>pb;",
         "4b>0;4b>pd;",
@@ -488,6 +498,12 @@
         "1B>va"
       ]
     },
+    "set_para_RT_VOLT_SET": {
+      "type": "RIS",
+      "data": [
+        "XE2;X01;2B>RT_VOLT_SET"
+      ]
+    },
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"

python/res/devlib/json/Elite_EIS_MINI_1.0.devlib.json

@@ -9,7 +9,7 @@
     "minor_version_number": 2
   },
   "constant": {
-    "FREQ_MAX": 4294967296,
+    "FREQ_MAX": 13333334,
     "VOLT_MAX": 65536,
     "BLE_WRITE_MAX": 255,
     "TIME_MAX": 100000
@@ -32,12 +32,6 @@
       "domain": "property",
       "value": "[0, 1, 2]"
     },
-    "CHANNEL_LABEL": {
-      "description": "channel label",
-      "record_meta": true,
-      "domain": "property",
-      "value": "['current', 'voltage', 'impedance']"
-    },
     "SAMPLE_RATE": {
       "description": "data sampling rate",
       "record_meta": true,
@@ -64,11 +58,44 @@
         "Cyclic Voltammetry",
         "Chronoamperometric",
         "V-T Graph",
+        "R-T Graph",
         "Dev Mode"
       ]
     },
-    "FREQ": {
-      "description": "DPV current recording period start",
+    "GENERAL_HS_RTIA": {
+      "description": "High speed rtia gain",
+      "record_meta": true,
+      "initial": 4,
+      "value": [
+        0,
+        1,
+        2,
+        3,
+        4
+      ],
+      "on_change": "set_general_hs_rtia"
+    },
+    "EIS_DC_BIAS": {
+      "description": "DC voltage bias",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "EIS_AC_AMP": {
+      "description": "AC Amplitude",
+      "record_meta": true,
+      "initial": 25,
+      "domain": [
+        2048
+      ]
+    },
+    "EIS_FREQ": {
+      "description": "[start, stop] of frequency scan",
       "record_meta": true,
       "initial": [
         13333333,
@@ -81,29 +108,24 @@
       },
       "value": "VALUE"
     },
-    "FREQ_START": {
-      "description": "Start of Freq Scan",
+    "EIS_PPD": {
+      "description": "Point per decades",
       "record_meta": true,
-      "initial": 13422819,
+      "initial": 10,
       "domain": [
-        "FREQ_MAX"
-      ],
-      "value": {
-        "expression": "VALUE"
-      }
+        11
+      ]
     },
-    "FREQ_STOP": {
-      "description": "End of Freq Scan",
+    "EIS_SCALE": {
+      "description": "Point spacing pattern",
       "record_meta": true,
-      "initial": 7,
-      "domain": [
-        "FREQ_MAX"
-      ],
-      "value": {
-        "expression": "VALUE"
-      }
+      "initial": 0,
+      "value": [
+        0,
+        1
+      ]
     },
-    "DELAY": {
+    "EIS_DELAY": {
       "description": "Wait x peroid before start taking measurements",
       "record_meta": true,
       "initial": 0,
@@ -114,65 +136,18 @@
         "expression": "VALUE"
       }
     },
-    "AVERAGE_NUM": {
+    "EIS_AVERAGE_NUM": {
       "description": "Number of sample used for average funciton",
       "record_meta": true,
       "initial": 8,
       "value": [
         2,
         4,
-        8,
-        16
-      ]
-    },
-    "DC_BIAS": {
-      "description": "DC voltage bias in mV",
-      "record_meta": true,
-      "initial": 25000,
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": {
-        "expression": "VALUE"
-      }
-    },
-    "AC_AMP": {
-      "description": "AC Amplitude in mV",
-      "record_meta": true,
-      "initial": 25,
-      "domain": [
-        2048
-      ]
-    },
-    "SCALE": {
-      "description": "Point spacing pattern",
-      "record_meta": true,
-      "initial": 0,
-      "value": [
-        0,
-        1
-      ]
-    },
-    "PPD": {
-      "description": "Point per decades",
-      "record_meta": true,
-      "initial": 10,
-      "domain": [
-        11
-      ]
-    },
-    "RTIA": {
-      "description": "High speed tia gain",
-      "record_meta": true,
-      "initial": 4,
-      "value": [
-        0,
-        1,
-        2,
-        3,
-        4
+        6,
+        8
       ]
     },
+
     "ADC_VALUE_I": {
       "description": "ADC value current value",
       "domain": "int"
@@ -220,8 +195,7 @@
         "1",
         "2",
         "auto"
-      ],
-      "on_change": "set_adc_gain_Vin"
+      ]
     },
     "VOLT_INITIAL": {
       "description": "Initial Voltage of Scan",
@@ -289,6 +263,18 @@
         "auto"
       ]
     },
+    "RT_VOLT_SET": {
+      "description": "DAC output Voltage",
+      "record_meta": true,
+      "initial": 37500,
+      "domain": [
+        65536
+      ],
+      "value": {
+        "expression": "VALUE"
+      },
+      "on_change": "set_para_RT_VOLT_SET"
+    },
     "BLE_WRITE": {
       "description": "send msg to elite",
       "domain": {
@@ -319,17 +305,11 @@
       {
         "expression": "MODE",
         "when": {
+          "0": "set_general_hs_rtia",
           "1": "set_adc_gain_I",
           "2": "set_adc_gain_I",
-          "3": "set_adc_gain_I"
-        }
-      },
-      {
-        "expression": "MODE",
-        "when": {
-          "1": "set_adc_gain_Vin",
-          "2": "set_adc_gain_Vin",
-          "3": "set_adc_gain_Vin"
+          "3": "set_adc_gain_I",
+          "4": "set_adc_gain_I"
         }
       },
       {
@@ -338,7 +318,8 @@
           "0": "curve_eis",
           "1": "curve_cv3",
           "2": "curve_const_vscan",
-          "3": "curve_vt"
+          "3": "curve_vt",
+          "4": "curve_rt"
         }
       },
       {
@@ -348,6 +329,12 @@
           "1": "curve_cv3_para2"
         }
       },
+      {
+        "expression": "MODE",
+        "when": {
+          "0": "curve_eis_mode"
+        }
+      },
       "_sync(True)",
       "VIS_STI"
     ],
@@ -365,6 +352,12 @@
     "data_format_cali": [
       "_data_format_cali('EISZeroOne')"
     ],
+    "set_general_hs_rtia": {
+      "type": "RIS",
+      "data": [
+        "1XFF;1X70;1B>GENERAL_HS_RTIA"
+      ]
+    },
     "set_sample_rate": {
       "type": "RIS",
       "parameter": {
@@ -380,12 +373,6 @@
         "XE1;X05;B>ADC_LEVEL_I_15"
       ]
     },
-    "set_adc_gain_Vin": {
-      "type": "RIS",
-      "data": [
-        "XE1;X06;B>ADC_LEVEL_V_IN_15"
-      ]
-    },
     "set_ctrl_highZ": {
       "type": "RIS",
       "data": [
@@ -395,35 +382,41 @@
     "curve_eis": {
       "type": "RIS",
       "parameter": {
-        "fa": "FREQ[0]",
-        "fb": "FREQ[1]",
-        "dp": "DELAY",
-        "dc": "DC_BIAS",
-        "am": "AC_AMP",
-        "an": "AVERAGE_NUM",
-        "rt": "RTIA",
-        "pp": "PPD",
-        "sp": "SCALE"
+        "fa": "EIS_FREQ[0]",
+        "fb": "EIS_FREQ[1]",
+        "dp": "EIS_DELAY",
+        "dc": "EIS_DC_BIAS",
+        "am": "EIS_AC_AMP",
+        "an": "EIS_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "EIS_PPD",
+        "sp": "EIS_SCALE"
       },
       "data": [
-        "1XD1;1X01;4B>fa;4B>fb;2B>dp"
+        "1X12;1X01;4B>fa;4B>fb;2B>dp"
       ]
     },
     "curve_eis_para2": {
       "type": "RIS",
       "parameter": {
-        "fa": "FREQ[0]",
-        "fb": "FREQ[1]",
-        "dp": "DELAY",
-        "dc": "DC_BIAS",
-        "am": "AC_AMP",
-        "an": "AVERAGE_NUM",
-        "rt": "RTIA",
-        "pp": "PPD",
-        "sp": "SCALE"
+        "fa": "EIS_FREQ[0]",
+        "fb": "EIS_FREQ[1]",
+        "dp": "EIS_DELAY",
+        "dc": "EIS_DC_BIAS",
+        "am": "EIS_AC_AMP",
+        "an": "EIS_AVERAGE_NUM",
+        "rt": "GENERAL_HS_RTIA",
+        "pp": "EIS_PPD",
+        "sp": "EIS_SCALE"
       },
       "data": [
-        "1XD1;1X02;2B>dc;2B>am;B>an;B>rt;2B>pp;B>sp"
+        "1X12;1X02;2B>dc;2B>am;B>an;B>rt;2B>pp;B>sp"
+      ]
+    },
+    "curve_eis_mode": {
+      "type": "RIS",
+      "data": [
+        "1X12;1XFF"
       ]
     },
     "curve_cv3": {
@@ -437,7 +430,7 @@
         "cn": "CYCLE_NUMBER"
       },
       "data": [
-        "1XD2;1X01;2B>va;2B>vb;2B>vc;"
+        "1X09;1X01;2B>va;2B>vb;2B>vc;"
       ]
     },
     "curve_cv3_para2": {
@@ -451,7 +444,7 @@
         "cn": "CYCLE_NUMBER"
       },
       "data": [
-        "1XD2;1X02;4B>ve;2B>vf;2B>cn"
+        "1X09;1X02;4B>ve;2B>vf;2B>cn"
       ]
     },
     "curve_const_vscan": {
@@ -464,7 +457,24 @@
         "pe": "SAMPLE_RATE"
       },
       "data": [
-        "1XD3;",
+        "1X0B;",
+        "2B>va;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe"
+      ]
+    },
+    "curve_rt": {
+      "type": "RIS",
+      "parameter": {
+        "va": "RT_VOLT_SET",
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE"
+      },
+      "data": [
+        "X04;",
         "2B>va;",
         "4b>pa;4b>pb;",
         "4b>0;4b>pd;",
@@ -488,6 +498,12 @@
         "1B>va"
       ]
     },
+    "set_para_RT_VOLT_SET": {
+      "type": "RIS",
+      "data": [
+        "XE2;X01;2B>RT_VOLT_SET"
+      ]
+    },
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"