[update] EIS Mini vt mode add

.gitignore

@@ -1,5 +1,7 @@
 .DS_Store
 *.cpython-37.opt-2.pyc
+*.cpython-39-arm-linux-gnueabihf.so
+*.
 *.pyc
 */__pycache__
 /.vscode

python/biopro/controller.py

@@ -1585,6 +1585,15 @@ class ControlAPI(metaclass=Router):
     
     def stop_project(self, project) -> bool:
         raise NotImplementedError()
+    
+    def set_project(self, project, content) -> bool:
+        raise NotImplementedError()
+    
+    def set_project_cycle(self, project, index, content) -> bool:
+        raise NotImplementedError()
+    
+    def show_device_data(self, device) -> bool:
+        raise NotImplementedError()
 
 # noinspection PyAbstractClass
 class ControlClient(SocketClient, ControlAPI, metaclass=SocketClientMacro(ControlAPI)):

python/biopro/data.py

@@ -130,6 +130,14 @@ class DataAPI(metaclass=abc.ABCMeta):
     def hardware_test(self) -> JSON_OBJECT:
         """"""
         pass
+    
+    @abc.abstractmethod
+    def show_data(self, device: Union[int, Device]):
+        """show device data
+
+        :param device: device ID
+        """
+        pass
 
 
 # noinspection PyAbstractClass
@@ -191,6 +199,9 @@ class DataClient(SocketClient, DataAPI, metaclass=SocketClientMacro(DataAPI)):
 
     def stop_sync(self, *device: Union[int, Device]):
         self.send_command('stop_sync', *self._to_device_id(*device))
+    
+    def show_data(self, device: int):
+        self.send_command('show_data', device)
 
     @staticmethod
     def _to_device_id(*device: Union[int, Device]) -> Tuple[int, ...]:

python/biopro/device/device_cc2650.py

@@ -662,7 +662,7 @@ class CC2650Device(Device):
         elif device_type == 'EISZeroOne':
             i = 0
             request_times = 0
-            while i < 7:
+            while i < 13:
                 try:
                     # send
                     code = self._encode_instruction(DeviceInstruction.TYP_CIS, DeviceInstruction.CIS_CALI, i)

python/biopro/devlib/data.py

@@ -1,6 +1,7 @@
 import abc
 import struct
 import math
+import numpy
 from typing import Optional, TypeVar, Generic, Tuple, Dict, List, AnyStr
 from datetime import datetime
 
@@ -853,7 +854,7 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
 
     __slots__ = ('_message', '_cycle_number', '_start_return_data', '_time_stamp',
                  '_total_time_stamp', '_mode', '_cycle_start_time',
-                 '_mode_stop')
+                 '_mode_stop', '_show_data')
 
     def __init__(self):
         super().__init__()
@@ -868,6 +869,8 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
         self._mode = 0
         self._cycle_start_time = []
 
+        self._show_data = False
+
     @property
     def name(self) -> str:
         return self.NAME
@@ -881,19 +884,21 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
     def decode(self, data: bytes) -> Optional[RecordingData]:
         if len(data) < 18:
             return None
-
+        voltage = 0
         mem_cnt = data[1]
         time_stamp: float = struct.unpack('<I', data[4:8])[0]  # unit: ms 0x18030000
         current = struct.unpack('<i', data[8:12])[0]  # unit: nA
         voltage = struct.unpack('<i', data[12:16])[0]  # unit: uV
         impedance = struct.unpack('<i', data[16:20])[0]  # unit: mOm
-        if self._mode == 16:
-            voltage = impedance - voltage
 
         cycle_number = struct.unpack('<H', data[20:22])[0]
         finish_mode_falg = data[22]
         battery = struct.unpack('<i', data[23:27])[0]
         elite_notify_times = data[27]
+        notify_one = struct.unpack('<i', data[28:32])[0]
+        notify_two = struct.unpack('<i', data[32:36])[0]
+        notify_three = struct.unpack('<i', data[36:40])[0]
+        # self._show_data = True
 
         mem_wrong_information = struct.unpack('<i', data[43:47])[0] # mem_wrong_information = green retry, green wrong, red retry, red wrong
         ram_num = data[47]
@@ -917,9 +922,11 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
                 print("error timeStamp full data:", list(data), datetime.now(), '\n')
                 return None
             else:
-                # print('|', time_stamp, '|', delta, '|', int(time_stamp * 1000 / 2),
-                #       '|', current, '|', voltage, '|', impedance,
-                #       '|', cycle_number, '|', finishMode, '@', str(self.device))
+                if self._show_data:
+                    print('|', time_stamp, '|', delta, '|', int(time_stamp * 1000 / 2),
+                        '|', current, '|', voltage, '|', impedance, '|', cycle_number, 
+                        '|', notify_one, '|', notify_two, '|', notify_three, 
+                        '|', finishMode, '@', str(self.device))
 
                 # print('|', '{:10}'.format(time_stamp),
                 #       '|', '{:4}'.format(delta),
@@ -948,18 +955,21 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
         ret.append_data(1, voltage)
         ret.append_data(2, impedance)
         ret.append_data(3, cycle_number)
-        ret.append_data(4, battery)
-        ret.append_data(5, elite_notify_times)
-        ret.append_data(6, mem_cnt)
+        ret.append_data(4, notify_one)
+        ret.append_data(5, notify_two)
+        ret.append_data(6, notify_three)
+        # ret.append_data(4, battery)
+        # ret.append_data(5, elite_notify_times)
+        # ret.append_data(6, mem_cnt)
 
-        # memoryboard information
-        ret.append_data(7, ram_num)
-        ret.append_data(8, broken_flag)
-        try:
-            ret.append_data(9, mem_wrong_information)
-            # print('append_data success, mem_wrong_information:', mem_wrong_information, hex(mem_wrong_information))
-        except:
-            print('append_data fail, mem_wrong_information:', mem_wrong_information, hex(mem_wrong_information))
+        # # memoryboard information
+        # ret.append_data(7, ram_num)
+        # ret.append_data(8, broken_flag)
+        # try:
+        #     ret.append_data(9, mem_wrong_information)
+        #     # print('append_data success, mem_wrong_information:', mem_wrong_information, hex(mem_wrong_information))
+        # except:
+        #     print('append_data fail, mem_wrong_information:', mem_wrong_information, hex(mem_wrong_information))
 
 
     
@@ -1337,7 +1347,7 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                  '_total_time_stamp', '_mode', '_cycle_start_time',
                  '_mode_stop', '_last_time_stamp', '_last_delta', '_cali_coeff',
                  'cali_coeff', '_ac_amp', '_mode', '_freq_start', '_freq_stop',
-                 '_freq_direction', '_last_phase', '_first_phase_flag')
+                 '_freq_direction', '_last_phase', '_first_phase_flag', '_show_data')
 
     def __init__(self, cali_coeff: bytes = None):
         super().__init__()
@@ -1361,6 +1371,8 @@ class EISZeroOneDataDecoder(RecDataDecoder):
         self._cali_coeff: Optional[bytes] = None
         self.cali_coeff: Optional[List[Tuple[int, int]]] = None
 
+        self._show_data = False
+
         if cali_coeff is not None:
             self._cali_coeff = cali_coeff
             self.cali_coeff = self._decode_cali_coeff(cali_coeff)
@@ -1369,12 +1381,27 @@ class EISZeroOneDataDecoder(RecDataDecoder):
     def _decode_cali_coeff(cali_coeff: bytes) -> Optional[List[Tuple[int, int]]]:
         if cali_coeff != b'':
             cali_table = []
-            phase_para_a = []
-            phase_para_b = []
             hsrtia_a = []
             hsrtia_b = []
             hsrtia_c = []
             hsrtia_d = []
+            phase_coeff = []
+            phase_offset = []
+            
+            # phase_coeff = [[0]*4 for i in range(4)]
+            # phase_offset = [[0]*4 for i in range(4)]
+
+            phase_coeff = numpy.zeros([4, 4], dtype = int)
+            phase_offset = numpy.zeros([4, 4], dtype = int)  
+
+            ########################################
+            # phase_coeff
+            # [[gain0, g1, g2, g3] ----->最高頻
+            #  [gain0, g1, g2, g3] ----->中頻
+            #  [gain0, g1, g2, g3] ----->低頻
+            #  [gain0, g1, g2, g3] ----->最低頻
+            # ]
+            #######################################
 
             # print('cali_coeff', cali_coeff)
             cutoff_freq = struct.unpack('>I', cali_coeff[1:5])[0] * 100     #4
@@ -1385,57 +1412,95 @@ class EISZeroOneDataDecoder(RecDataDecoder):
             # hsrtia_160k = struct.unpack('>I', cali_coeff[8:12])[0]         #4
 
             index = 20
-            for i in range(index, index+16, 8):
-                phase_para_a.append(struct.unpack('>i', cali_coeff[i+1:i+5])[0])
-                phase_para_b.append(struct.unpack('>i', cali_coeff[i+5:i+9])[0])
-
+            g = 0
+            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
             index = 40
-            for i in range(index, index+16, 8):
-                phase_para_a.append(struct.unpack('>i', cali_coeff[i+1:i+5])[0])
-                phase_para_b.append(struct.unpack('>i', cali_coeff[i+5:i+9])[0]) 
-
+            g = 0
+            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
             #Lv[0] 160k
             index = 60
             hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
             hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
             hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0]/1e4)
-            hsrtia_d.append(struct.unpack('>B', cali_coeff[index+13:index+14])[0])
 
             #Lv[1] 20k
             index = 80
             hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
             hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
             hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0]/1e4)
-            hsrtia_d.append(struct.unpack('>B', cali_coeff[index+13:index+14])[0])
 
             #Lv[2] 5k
             index = 100
             hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
             hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
             hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0]/1e4)
-            hsrtia_d.append(struct.unpack('>B', cali_coeff[index+13:index+14])[0])
 
             #Lv[3] 200R
             index = 120
             hsrtia_a.append(struct.unpack('>i', cali_coeff[index+1:index+5])[0]/1e8)
             hsrtia_b.append(struct.unpack('>i', cali_coeff[index+5:index+9])[0]/1e8)
             hsrtia_c.append(struct.unpack('>i', cali_coeff[index+9:index+13])[0]/1e4)
-            hsrtia_d.append(struct.unpack('>B', cali_coeff[index+13:index+14])[0])
 
-            # hsrtia_a.append(struct.unpack('>I', cali_coeff[index+1:index+5])[0])
-            # hsrtia_b.append(struct.unpack('>I', cali_coeff[index+5:index+9])[0]/1e6)
-            # hsrtia_c.append(struct.unpack('>I', cali_coeff[index+9:index+13])[0]/1e5)
-            # hsrtia_d.append(struct.unpack('>I', cali_coeff[index+13:index+17])[0]/1e6)
+            index = 140
+            g = 1
+            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            index = 160
+            g = 1
+            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            index = 180
+            g = 2
+            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            index = 200
+            g = 2
+            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            index = 220
+            g = 3
+            phase_coeff[0][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[0][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[1][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[1][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
+            
+            index = 240
+            g = 3
+            phase_coeff[2][g] = struct.unpack('>i', cali_coeff[index+1:index+5])[0]
+            phase_offset[2][g] = struct.unpack('>i', cali_coeff[index+5:index+9])[0]
+            phase_coeff[3][g] = struct.unpack('>i', cali_coeff[index+9:index+13])[0]
+            phase_offset[3][g] = struct.unpack('>i', cali_coeff[index+13:index+17])[0]
 
             # print('cutoff_freq', cutoff_freq)
             # print('hsrtia_a', hsrtia_a)
             # print('hsrtia_b', hsrtia_b)
             # print('hsrtia_c', hsrtia_c)
-            # print('hsrtia_d', hsrtia_d)
-            # print('phase_para_a', phase_para_a)
-            # print('phase_para_b', phase_para_b)
+            # print('phase_coeff')
+            # print(phase_coeff)
+            # print('phase_offset')
+            # print(phase_offset)
 
-            cali_table.append((cutoff_freq, phase_para_a, phase_para_b, hsrtia_a, hsrtia_b, hsrtia_c, hsrtia_d))
+            cali_table.append((cutoff_freq, phase_coeff, phase_offset, hsrtia_a, hsrtia_b, hsrtia_c, hsrtia_d))
 
             return cali_table
         else:
@@ -1485,13 +1550,12 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                 return None
             else:
                 if self.cali_coeff is not None and self._mode == 0:
-                    phase_para_a = []
-                    phase_para_b = []
                     hsrtia_a = []
                     hsrtia_b = []
                     hsrtia_c = []
                     hsrtia_d = []
-                    cutoff_freq, phase_para_a, phase_para_b, hsrtia_a, hsrtia_b, hsrtia_c, hsrtia_d = self.cali_coeff[0]
+                    cutoff_freq, phase_coeff, phase_offset, hsrtia_a, hsrtia_b, hsrtia_c, hsrtia_d = self.cali_coeff[0]
+
                     voltage_amp = round(self._ac_amp * 800 / 2047) # use UI value
                     if (self._freq_start > self._freq_stop):
                         self._freq_direction = 0
@@ -1502,6 +1566,7 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                     img = ch1
                     real = ch2
                     freq = ch3
+                    fre_idx = 0
 
                     voltage_mag = math.sqrt(img ** 2 + real ** 2) * (1 + freq ** 2 / cutoff_freq ** 2)
 
@@ -1529,56 +1594,56 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                         raw_phase = math.atan(img / real) * 180 / math.pi + 180
 
                     if (freq >= 1000000): # 10000 Hz
-                        i = 0
+                        fre_idx = 0
                     elif (freq >= 10000): # 100 Hz
-                        i = 1
+                        fre_idx = 1
                     elif (freq >= 1000): # 10 Hz
-                        i = 2
+                        fre_idx = 2
                     elif (freq >= 1): # 0.01 Hz
-                        i = 3
+                        fre_idx = 3
                     
-                    ideal_raw_phase = phase_para_a[i] /1e10 * freq + phase_para_b[i] / 1e6
+                    ideal_raw_phase = phase_coeff[fre_idx][gain] /1e10 * freq + phase_offset[fre_idx][gain] / 1e6
 
                     phase = raw_phase - ideal_raw_phase
 
                     if (self._first_phase_flag):
                         self._last_phase = phase
                         self._first_phase_flag = 0
-                    elif (abs(phase - self._last_phase) >= 200):
+                    elif (abs(phase - self._last_phase) >= 90):
                         phase -= 360
                         self._last_phase = phase
 
                     imag_after_cal = impedance * math.sin(round(phase) * math.pi / 180)
                     real_after_cal = impedance * math.cos(round(phase) * math.pi / 180)
 
-
-                if (self._mode == 0):
-                    # print('|', '{:10}'.format(time_stamp),
-                    #     '|', '{:5}'.format(delta),
-                    #     '|', '{:6}'.format(ch1),
-                    #     '|', '{:6}'.format(ch2),
-                    #     '|', '{:8}'.format(ch3 / 100),
-                    #     '|', '{:6}'.format(round(voltage_mag)),
-                    #     '|', '{:5}'.format(int(imag_after_cal)),
-                    #     '|', '{:5}'.format(int(real_after_cal)),
-                    #     '|', '{:5}'.format(round(impedance)),
-                    #     '|', '{:5}'.format(round(phase, 1)),
-                    #     '|', '{:5}'.format(round(current, 3)),
-                    #     '|', '{:1}'.format(gain),
-                    #     '|', '{:1}'.format(finishMode),
-                    #     '@', str(self.device), '|')
-                    pass
-                else:
-                    # print('|', '{:10}'.format(time_stamp),
-                    #     '|', '{:5}'.format(delta),
-                    #     '|', '{:5}'.format(ch1),
-                    #     '|', '{:5}'.format(ch2),
-                    #     '|', '{:5}'.format(ch3),
-                    #     '|', '{:5}'.format(cycle_number),
-                    #     '|', '{:1}'.format(gain),
-                    #     '|', '{:1}'.format(finishMode),
-                    #     '@', str(self.device), '|')
-                    pass
+                if self._show_data:
+                    if (self._mode == 0):
+                        print('|', '{:10}'.format(time_stamp),
+                            '|', '{:5}'.format(delta),
+                            '|', '{:6}'.format(ch1),
+                            '|', '{:6}'.format(ch2),
+                            '|', '{:8}'.format(ch3 / 100),
+                            '|', '{:6}'.format(round(voltage_mag)),
+                            '|', '{:5}'.format(int(imag_after_cal)),
+                            '|', '{:5}'.format(int(real_after_cal)),
+                            '|', '{:5}'.format(round(impedance)),
+                            '|', '{:5}'.format(round(phase, 1)),
+                            '|', '{:5}'.format(round(current, 3)),
+                            '|', '{:1}'.format(gain),
+                            '|', '{:1}'.format(finishMode),
+                            '@', str(self.device), '|')
+                        pass
+                    else:
+                        print('|', '{:10}'.format(time_stamp),
+                            '|', '{:5}'.format(delta),
+                            '|', '{:5}'.format(ch1),
+                            '|', '{:5}'.format(ch2),
+                            '|', '{:5}'.format(ch3),
+                            '|', '{:5}'.format(cycle_number),
+                            '|', '{:1}'.format(gain),
+                            '|', '{:1}'.format(finishMode),
+                            '@', str(self.device), '|')
+                        pass
 
         if finishMode == True:
             print("finishMode full data:", list(data), datetime.now())
@@ -1588,10 +1653,10 @@ class EISZeroOneDataDecoder(RecDataDecoder):
 
         ret = RecordingData(self.device, int(time_stamp * 1000 / 2), 0)
         if (self._mode == 0):                           #EIS Mode
-            ret.append_data(3, cycle_number)
             ret.append_data(0, ch1)                     #Raw Imag  
             ret.append_data(1, ch2)                     #Raw Real
             ret.append_data(2, ch3 * 10)                #Frequency [mHz]
+            ret.append_data(3, cycle_number)
             ret.append_data(4, round(imag_after_cal))   #Z_imag [Ohm]
             ret.append_data(5, round(real_after_cal))   #Z_real [Ohm]
             ret.append_data(6, round(impedance))        #Impedance [Ohm]
@@ -1600,10 +1665,10 @@ class EISZeroOneDataDecoder(RecDataDecoder):
             ret.append_data(9, gain)                    #Gain Level
 
         else:                                           #CV Mode
-            ret.append_data(3, cycle_number)
             ret.append_data(0, ch1)                     #Iin     [nA]
             ret.append_data(1, ch2)                     #Vset    [nV]
             ret.append_data(2, ch3)                     #Vout    [nV]
+            ret.append_data(3, cycle_number)
 
         if cycle_number != self._cycle_number:
             # notify cycle_number change

python/biopro/devlib/device.py

@@ -651,17 +651,9 @@ class DeviceInstruction:
     VIS_DEVICE_DONE = 0x20
     """identify device done"""
 
-    VIS_CC_ZERO = 0x40
-
-    VIS_ASK = 0x30
-    """ask in virtual instruction"""
-
     VIS_STI = 0xC0
     """stimulation on virtual instruction"""
 
-    VIS_FUH = 0x90
-    """flush virtual instruction"""
-
     VIS_INT = 0x60
     """interrupt virtual instruction"""
 
@@ -732,7 +724,6 @@ class DeviceCommonInstruction:
     STOP_STIMULATE = "stop_stimulate"
     VIS_DEVICE_DETECT = 'VIS_DEVICE_DETECT'
     VIS_DEVICE_DONE = 'VIS_DEVICE_DONE'
-    VIS_CC_ZERO = 'VIS_CC_ZERO'
     CIS_VOLT = 'CIS_VOLT'
     CIS_VERSION = 'CIS_VERSION'
 
@@ -750,16 +741,12 @@ class DeviceCommonInstruction:
             return '_sync(False)', '_notify(False)', 'VIS_INT'
         elif instruction == cls.CLOSE:
             return '_sync(False)', '_notify(False)', 'VIS_INT'
-        elif instruction == cls.FLUSH:
-            return 'VIS_FUH',
         elif instruction == cls.CALL:
             return 'VIS_CAL',
         elif instruction == cls.VIS_DEVICE_DETECT:
             return 'VIS_DEVICE_DETECT',
         elif instruction == cls.VIS_DEVICE_DONE:
             return 'VIS_DEVICE_DONE',
-        elif instruction == cls.VIS_CC_ZERO:
-            return 'VIS_CC_ZERO',
         elif instruction == cls.RECORD:
             return 'VIS_STARTR',
         elif instruction == cls.RECORD_ALL:

python/biopro/devlib/domain.py

@@ -4,6 +4,7 @@ from biopro.util.text import part_suffix
 from . import *
 from .expression import *
 
+import json
 
 class DeviceParameterError(RuntimeError):
     __slots__ = ()
@@ -309,6 +310,8 @@ class ParameterValueDomain(ParameterDomain, metaclass=abc.ABCMeta):
                 return f
 
     def valid_para(self, value: Any) -> bool:
+        if isinstance(value, list):
+            return True
         f, t = self.range
         return f <= float(value) < t
 
@@ -489,8 +492,12 @@ class ParameterCollectionValueOperator(metaclass=abc.ABCMeta):
 
     @classmethod
     def parse(cls, expr: Union[int, str]) -> 'ParameterCollectionValueOperator':
+        # parse epression then create value_operator
         if isinstance(expr, int):
             return SingleValueOperator(None, expr)
+        
+        elif isinstance(expr, list):
+            return CollectValueOperator((0, len(expr)), expr)
 
         elif expr == '*':
             return AddAllValueOperator
@@ -498,6 +505,10 @@ class ParameterCollectionValueOperator(metaclass=abc.ABCMeta):
         elif expr == ':=':
             return CollectValueOperator((None, None), [])
 
+        elif '[' in expr and ']' in expr:
+            v = json.loads(expr)
+            return CollectValueOperator((0, len(v)), v)
+
         elif '=' in expr:
             a, v = part_suffix(expr, '=')
 
@@ -508,6 +519,7 @@ class ParameterCollectionValueOperator(metaclass=abc.ABCMeta):
                     return CollectValueOperator((None, None), v)
 
                 else:
+                    # get list length (old way)
                     a, b = part_suffix(a, ':')
                     a = int(a) if len(a) else None
                     b = int(b) if len(b) else None
@@ -602,8 +614,8 @@ class ParameterCollectionDomain(ParameterDomain, metaclass=abc.ABCMeta):
     def __init__(self, domain: ParameterDomain):
         super().__init__()
 
-        if isinstance(domain, ParameterCollectionDomain):
-            raise RuntimeError('cannot compose with parameter collection domain')
+        # if isinstance(domain, ParameterCollectionDomain):
+        #     raise RuntimeError('cannot compose with parameter collection domain')
 
         self._domain = domain
 
@@ -725,6 +737,7 @@ class ParameterListDomain(ParameterCollectionDomain):
         if oper == AddAllValueOperator:
             raise ValueError("list parameter cannot accept '*' (all) value")
 
+        # d: domain, sz: lsit length, i: slice(a, b), v: list value
         d = self.element_domain
         sz = len(target)
         i = oper.index(sz)

python/biopro/devlib/encoder.py

@@ -119,7 +119,10 @@ class DeviceConfigurationEncoder:
                 e.write(b'L\0')
 
             else:
-                parameter_type = cls._value_type(value[0])
+                parameter_type = cls._value_type(max(value))
+                for v in value:
+                    if isinstance(v, int) and v < 0:
+                        parameter_type = parameter_type.lower()
                 e.write(b'L')
                 e.write(parameter_type.encode())
                 e.u8(sz)
@@ -153,7 +156,8 @@ class DeviceConfigurationEncoder:
         if isinstance(value, bool):
             e.u8(1 if value else 0)
 
-        elif isinstance(value, str):
+        elif isinstance(value, str) or isinstance(value, list):
+            value = str(value)
             e.encode_string(value)
 
         elif isinstance(value, int):
@@ -170,7 +174,7 @@ class DeviceConfigurationEncoder:
         if isinstance(value, bool):
             return '?'
 
-        elif isinstance(value, str):
+        elif isinstance(value, str) or isinstance(value, list):
             return 'p'
 
         elif isinstance(value, int):

python/biopro/devlib/library.py

@@ -510,9 +510,10 @@ class DeviceParameter(JsonSerialize):
         :param para: parameter name
         :param oper: operator expression
         """
+        # parse operator return CollectValueOperator instance
         if not isinstance(oper, ParameterCollectionValueOperator):
             oper = ParameterCollectionValueOperator.parse(oper)
-
+        
         table = self._library.parameter_table
         info = table[para]
         domain = info.domain
@@ -528,6 +529,7 @@ class DeviceParameter(JsonSerialize):
             old = list(target)
 
         try:
+            # replace target with new oper
             domain.oper_para(target, oper, self._context)
         except RuntimeError as e:
             raise IllegalParameterValueError(para, str(oper)) from e
@@ -1012,6 +1014,10 @@ class CompletedDevice(Device):
     def device_id(self) -> int:
         return self._device_id
 
+    @property
+    def memory_board(self) -> int:
+        return self._device_id
+
     @property
     def device_name(self) -> str:
         return self._device.device_name
@@ -1099,6 +1105,8 @@ class CompletedDevice(Device):
         return self._configuration.get_parameter(name, False)
     
     def set_multi_parameters(self, parameter):
+        if len(parameter) == 0:
+            return
         for (name, value) in parameter[0].items():
             if name != 'target':
                 self.set_parameter(name, value)
@@ -1122,6 +1130,11 @@ class CompletedDevice(Device):
                 self._parameter.set_parameter(name, value)
                 # raise RuntimeError('illegal parameter value : ' + value) from e
             else:
+                if name == 'MODE':
+                    if self.library_name.startswith('Elite_EDC'):
+                        self.set_parameter('CTRL_HIGH_Z_15', self.get_parameter('HIGHZ_TABLE')[value])
+                        self.set_parameter('TIME_DURATION', 0)
+
                 self._parameter.set_parameter(name, value)
 
         on_change = info.on_change
@@ -1274,15 +1287,20 @@ class CompletedDevice(Device):
 
     def as_json(self) -> JSON_OBJECT:
         return {
+            'id': self.device_id,
+            'name': self.device_name,
+            'status': self._status,
             'device_id':       self.device_id,
             'device_name':     self.device_name,
             'device_address':  list(self.mac_address),
             'device_status': self._status,
+            'mac_address': self.mac_address_in_str,
+            'memory_board': self.memory_board,
+            'serial_number':   self.serial_number.as_json(),
+            'version':  self.device_version,
             'battery':         self.battery,
             'parent':          self.parent,
             'recording_file_name':      self.recording_file_name,
-            'device_version':  self.device_version,
-            'serial_number':   self.serial_number.as_json(),
             'library_name':    self._library.name,
             'library_version': str(self._library.version),
             'configuration':   self.configuration.as_json(list_hide=True),

python/biopro/impl/ext_mem.py

@@ -35,7 +35,7 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
                  '_pin_ram_sel_value', '_pin_mem_sel_value', '_pin_mem_req_value',
                  '_read_green_times','_read_red_times',
                  '_elite_data_len', '_mem_header_len', '_mem_tailer_len', '_single_data_len',
-                 '_head_wrong_cnt')
+                 '_head_wrong_cnt', '_pin_busy_value')
 
     def __init__(self,
                  select: Selector,
@@ -50,11 +50,11 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
         self._single_data_len = self._elite_data_len + self._mem_header_len + self._mem_tailer_len
 
         # buffer
-        self._tx_buffer_header = [0] * 19
+        self._tx_buffer_header = [0] * 64
         self._tx_buffer_data = [0] * (self._single_data_len * 10 + 3)
 
         # memory control pin
-        self.pin_busy = OutputPin.get_used(P3Pin.MEM_BZY, True)
+        self.pin_busy: Optional[InputPin] = InputPin.get_used(P3Pin.MEM_BZY)
         self.pin_mem_req = OutputPin.get_used(P3Pin.MEM_REQ, False)
         self.pin_mem_sel = OutputPin.get_used(P3Pin.MEM_RST, True) # MEM_RST -> actually which memory board is assign
         self.pin_ram_sel: Optional[InputPin] = InputPin.get_used(P3Pin.MEM_SEL) # MEM_SEL -> actually is RAM_SEL, which RAM is assign
@@ -62,6 +62,7 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
         self._pin_ram_sel_value = [bool(self.pin_ram_sel) for _ in range(Selector.SIZE)]
         self._pin_mem_sel_value = [bool(self.pin_mem_sel) for _ in range(Selector.SIZE)]
         self._pin_mem_req_value = [bool(self.pin_mem_req) for _ in range(Selector.SIZE)]
+        self._pin_busy_value = [bool(self.pin_busy) for _ in range(Selector.SIZE)]
 
         self._read_green_times = 0
         self._read_red_times = 0
@@ -76,6 +77,8 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
 
     def set_pin_mem_req(self, value: bool):
         channel = self.select
+        # if self._pin_mem_req_value[channel] == value:
+        #     print('last_req_sig[channel] == value', channel, self._pin_mem_req_value[channel], value, datetime.now())
         self.pin_mem_req.output(value)
         self._pin_mem_req_value[channel] = value
 
@@ -96,6 +99,14 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
             self._pin_ram_sel_value[channel] = True
         return self._pin_ram_sel_value[channel]
 
+    def get_pin_busy(self):
+        channel = self.select
+        if self.pin_busy.input() == 0:
+            self._pin_busy_value[channel] = False
+        else:
+            self._pin_busy_value[channel] = True
+        return self._pin_busy_value[channel]
+
     @property
     def select(self) -> int:
         return self._selector.channel
@@ -214,7 +225,9 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
         return
 
     def recv_memory(self, device: int) -> Optional[bytes]:
-        self.pin_busy.output(False)
+        # self.pin_busy.output(False)
+
+        print('mem_req==ram_sel,[', self._pin_mem_req_value[device], ',', self._pin_ram_sel_value[device], ']')
 
         rx = []
 
@@ -298,6 +311,9 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
                 print("green data print:", data, device, datetime.now())
                 return None
 
+            # print('data=', list(data))
+            print('Ram:', data[62])
+
             if (length >= 4000):
                 flag_print = True
                 print("green data: big length:", length)
@@ -413,9 +429,9 @@ class MultiExtMemSpiInterface(LowLevelHardwareInterface):
         except BaseException as e:
             print(e)
 
-        finally:
-            # print("\n")
-            self.pin_busy.output(True)
+        # finally:
+        #     # print("\n")
+        #     self.pin_busy.output(True)
 
         return bytes(rx)
 

python/biopro/impl/interface_uart.py

@@ -28,7 +28,7 @@ class UARTInterface(LowLevelHardwareInterface):
         self._serial = serial.Serial(self._port,
                                      baudrate=self._baudrate,
                                      timeout=0,
-                                     writeTimeout=0.01)
+                                     writeTimeout=1)
         # deprecate function name which change at version 3.0
         self._serial.flushInput()
         self._serial.flushOutput()

python/biopro/impl/selector.py

@@ -118,13 +118,13 @@ class Selector:
         self._p2.output(p[2])
 
         # if (value == 4 and self._last_sel != 6):
-        #     print('mem_sel is not use gray code, value:', value, ', last value:', self._last_sel)
+        #     print('mem_sel is not use gray code, value:', value, ', last value:', self._last_sel, datetime.now())
         # elif (value == 5 and self._last_sel != 4):
-        #     print('mem_sel is not use gray code, value:', value, ', last value:', self._last_sel)
+        #     print('mem_sel is not use gray code, value:', value, ', last value:', self._last_sel, datetime.now())
         # elif (value == 7 and self._last_sel != 5):
-        #     print('mem_sel is not use gray code, value:', value, ', last value:', self._last_sel)
+        #     print('mem_sel is not use gray code, value:', value, ', last value:', self._last_sel, datetime.now())
         # elif (value == 6 and self._last_sel != 7):
-        #     print('mem_sel is not use gray code, value:', value, ', last value:', self._last_sel)
+        #     print('mem_sel is not use gray code, value:', value, ', last value:', self._last_sel, datetime.now())
             
         self._last_sel = value
 

python/biopro/project/action.py

@@ -24,3 +24,11 @@ class Action():
     @property
     def condition(self):
         return self._condition
+    
+    def as_json(self):
+        return {
+            'id': self._id,
+            'type': self._type,
+            'target': self._target,
+            'condition': self._condition
+        }

python/biopro/project/condition.py

@@ -45,8 +45,8 @@ class Condition():
         # print(operator, x, y)
         cases = {
             "equal": lambda a, b: a == b,
-            "bigger": lambda a, b: a > b,
-            "smaller": lambda a, b: a < b,
+            "bigger": lambda a, b: a >= b,
+            "smaller": lambda a, b: a <= b,
         }
 
         return cases[operator](x, y)
@@ -56,7 +56,8 @@ class Condition():
         return getattr(self, self.type)(**kwargs)
        
     def absolute_time(self, **kwargs):
-        now = int(time())
+        # now = int(time())
+        now = round(time(), 1)
         time_condition = round(self.datetime_to_timestamp(self.str_to_datetime(self._value)))
 
         return self.compareWith(self.comparsion, now, time_condition)
@@ -65,32 +66,80 @@ class Condition():
         project_start_time = kwargs['project_start_time']
         delay_time = kwargs['delay_time']
 
-        time_diff = int(time() - project_start_time - delay_time)
-        return self.compareWith(self.comparsion, time_diff, int(self._value))
+        # time_diff = int(time() - project_start_time - delay_time)
+        time_diff = round(time() - project_start_time - delay_time, 1)
+        return self.compareWith(self.comparsion, time_diff, round(int(self._value), 1))
     
     def after_task_run(self, **kwargs):
-        # print('relative_time_from_task', kwargs,kwargs['task_start_time'],kwargs['delay_time'])
+        # print('relative_time_from_task', kwargs['task_start_time'],kwargs['delay_time'])
         if len(kwargs['task_start_time']) == 0:
             return False
+        task = kwargs['self_task']
+        running_task = kwargs['running_task']
         task_start_time = kwargs['task_start_time'][-1]
         delay_time = kwargs['delay_time']
-
-        time_diff = int(time() - task_start_time - delay_time)
-        # print('time_diff',  time_diff)
-        return self.compareWith(self.comparsion, time_diff, int(self._value))
+        
+        time_diff = round(time() - task_start_time - delay_time, 1)
+        # print('real_diff', time() - task_start_time - delay_time)
+        # print(task.name, task.uuid, time_diff, round(int(self._value), 1), running_task.name, running_task.uuid)
+        # if round(int(self._value), 1) == 0 and time_diff == 0.1:
+        #     return True
+        if task.uuid != running_task.uuid:
+            return False
+        return self.compareWith('bigger', time_diff, round(int(self._value), 1))
+        # return self.compareWith(self.comparsion, time_diff, round(int(self._value), 1))
     
     def device(self, **kwargs):
         print('device')
     
-    def previous_task_done(self, **kwargs):
+    """ def previous_task_done(self, **kwargs):
         running_task = kwargs['running_task']
         if running_task.status == 2 and self._active == False:
             self._active = True
             return True
+        return False """
+
+    def previous_task_done(self, **kwargs):
+        running_task = kwargs['running_task']
+        self_task = kwargs['self_task']
+        # if running_task != None and self_task != None:
+        # print('\nprevious_task_done: ', running_task.status, ' ', self._active)
+        if running_task != self_task:
+            if running_task == None:
+                return True
+            if running_task.status == 2 and self._active == False:
+                # self._active = True
+                return True
         return False
 
+    def until_button_trigger(self, **kwargs):
+        running_task = kwargs['running_task']
+        if running_task != None:
+            if running_task.button_trigger == True:
+                running_task.button_trigger = False
+                return True
+        return False 
+    
+    """ def cycle(self, **kwargs):
+        running_task = kwargs['running_task']
+        self_task = kwargs['self_task']
+        if running_task != self_task:
+            if running_task.status == 2 and self._active == False:
+                # self._active = True
+                return True
+        return False """
+
     def str_to_datetime(self, time_str):
         return datetime.strptime(time_str,'%Y-%m-%dT%H:%M')
 
     def datetime_to_timestamp(self, date):
-        return datetime.timestamp(date)
+        return datetime.timestamp(date)
+
+    def as_json(self):
+        return {
+            'id': self._id,
+            'type': self._type,
+            'comparsion': self._comparsion,
+            'value': self._value,
+            'active': self._active
+        }

python/biopro/project/instruction.py

@@ -22,6 +22,7 @@ class Instruction():
     
         self._start_instruction = list(map(lambda ins: self._instruction_set[ins] ,['set_file_name', 'set_parent', 'set_parameter', 'call_instruction']))
         self._stop_instruction = list(map(lambda ins: self._instruction_set[ins] ,['call_instruction']))
+        self._idle_instruction = []
     
     @property
     def start(self) -> list:
@@ -29,4 +30,8 @@ class Instruction():
     
     @property
     def stop(self) -> list:
-        return self._stop_instruction
+        return self._stop_instruction
+
+    @property
+    def idle(self) -> list:
+        return self.idle_instruction

python/biopro/project/project.py

@@ -19,12 +19,12 @@ key_list = {
 }
 
 class Project(threading.Thread):
-  def __init__(self, project, device_manager: DeviceManager, mqttThread = None, name="project"):
+  def __init__(self, project, device_manager: DeviceManager, mqttThread = None, log_verbose = None, name="project"):
     super(Project, self).__init__(name = name)
     self._project = project
     self._device_manager = device_manager
     self._mqtt_thread = mqttThread
-    self._time_interval = 1
+    self._time_interval = 0.1
     self._start_time = None
     self._end_time = None
 
@@ -41,6 +41,12 @@ class Project(threading.Thread):
 
     self._task_manager = None
 
+    self._cycle = []
+
+    self._count = 1 #流水號
+
+    self.log_verbose = log_verbose
+
     self.setup_project(project)
     self.setup_device(self._device)
   
@@ -50,7 +56,7 @@ class Project(threading.Thread):
         key = key_list[key]
 
       if key == 'task':
-        self._task_manager = TaskManager(project['task'])
+        self._task_manager = TaskManager(project['task'], project['cycle'])
       elif key == 'uuid':
         pass
       else:
@@ -84,6 +90,14 @@ class Project(threading.Thread):
   @name.setter
   def name(self, new_name):
     self._name = new_name
+  
+  @property
+  def cycle(self) -> list:
+    return self._cycle
+  
+  @cycle.setter
+  def cycle(self, new_cycle):
+    self._cycle = new_cycle
 
   @property
   def desc(self) -> str:
@@ -117,9 +131,14 @@ class Project(threading.Thread):
   def mqtt_thread(self):
     return self._mqtt_thread
 
+  @property
+  def running_task(self):
+    return self._task_manager.running_task
+
   def run(self):
       self._status = 1
       self._start_time = time()
+      self.log_verbose('Project ' + self.name + ' start')
       self.mqtt_thread.broadcast_command('project:' + self._name + ' start at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
       
       while not self._stop_flag :
@@ -130,41 +149,92 @@ class Project(threading.Thread):
         for task in check_list:
           if task != None:
             now = time()
-            # print('round task', task.name)
-            # print('running task', self._task_manager.running_task.name, self._task_manager.running_task.status)
-            # if self._task_manager.prev_task != None:
-            #   print('previous_task', self._task_manager.prev_task.name, self._task_manager.prev_task.status)
 
             match_condition_list = task.check_condition(
               project_start_time = self._start_time,
               delay_time = delay_time,
               running_task= self._task_manager.running_task,
-              previous_task =  self._task_manager.prev_task
+              previous_task =  self._task_manager.prev_task,
+              self_task = task
             )
-            # print('match_condition_list', match_condition_list)
+
             for condition in match_condition_list:
               match_action_list = task.get_match_action(condition.id)
               for action in match_action_list:
-                # print('match_action', action.type, action.target)
-                if action.type == 'start' and task.status != 1:
-                  self._task_manager.set_running_task(task)
+                if action.type == 'cycle' and condition.type == 'previous_task_done':
                   self.mqtt_thread.broadcast_command('project:task ' + task.name + ' start at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
+                  self._task_manager.set_running_task(task)
+                if action.type == 'cycle' and condition.type == 'until_button_trigger':
+                  self._task_manager.running_task.stop()
 
-                device = self._complete_device[action.target]
-                task_info = task.get_task_info(action)
-                instruction_set = getattr(self._instruction_set, action.type, None)
-                # print('instruction_set',instruction_set)
-                
-                if instruction_set != None:
-                  for instruction in instruction_set:
-                    args = list(map(lambda arg: task_info[arg], instruction['arguments']))
-                    threading.Thread(target=getattr(device, instruction['method'])(*args))
+                if self._task_manager.running_task != None:
+                  if self._task_manager.running_task.uuid == task.uuid and action.type == 'cycle' and condition.type == 'after_task_run':
+                    self._task_manager.running_task.stop()
+
+                if action.type == 'start':
+                  if task.status != 1:
+                    self._task_manager.set_running_task(task)
+                    self.mqtt_thread.broadcast_command('project:task ' + task.name + ' start at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
+                # elif action.type == 'stop':
+                  # self.mqtt_thread.broadcast_command('project:task ' + str(self._task_manager.running_task.name) + ' stop at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
+                  # self._count += 1
+                  # if self.check_running_task_not_run() == True:
+                  #   self._task_manager.running_task.stop()
+
+                elif action.type == 'idle':
+                  self._task_manager.running_task.stop()
+
+                instruction_set = None
+
+                if action.target is not None:
+                  device = self._complete_device[action.target]
+                  if ((action.type == 'start' and device.status == 0) or (action.type == 'stop' and device.status == 1)):
+                    self.log_verbose('Project' + self.name + 'Task ' + task.name + ' match_condition ' + condition.type + ' trigger_action ' + action.type + ' ' + str(action.target))
+                    task_info = task.get_task_info(action)
+                    instruction_set = getattr(self._instruction_set, action.type, None)
+                    
+                    # 檔名修正
+                    # device
+                    task_info['file_name'] += '#' + device.mac_address_in_str[12:].upper()
+                    # 流水號
+                    task_info['file_name'] += '#' + str(self._count)
+
+                    # 添加cycle資訊
+                    if len(self.cycle) > 0:
+                      index = self._task_manager.get_index_by_task(task)
+                      # get list of cycle determine by index of task
+                      filtered = list(filter(lambda info: self._task_manager.get_index_by_uuid(info['range'][0]) < index and self._task_manager.get_index_by_uuid(info['range'][1]) > index, self.cycle))
+                      
+                      if len(filtered) == 0:
+                        pass
+                      elif len(filtered) == 1:
+                        if filtered[0]['useID'] == True:
+                          task_info['file_name'] += '#' + str(filtered[0]['id'])
+                        else:
+                          task_info['file_name'] += '#' + str(filtered[0]['name']) + '-' + str(filtered[0]['count'])
+                      else:
+                        # if multi cycle, then sort by range from task index to cycle start index, then loop concat filename
+                        filtered.sort(key=lambda info: abs(self._task_manager.get_index_by_uuid(info['range'][0]) - index))
+                        for cycle_info in filtered:
+                          if cycle_info['useID'] == True:
+                            task_info['file_name'] += '#' + str(cycle_info['id'])
+                          else:
+                            task_info['file_name'] += '#' + str(cycle_info['name']) + '-' + str(cycle_info['count'])
+                    self.log_verbose('file name ' + task_info['file_name'])
+                    
+                  if instruction_set != None and len(task.parameter_set) > 0:
+                    if action.type == 'start':
+                      self._count += 1
+                    for instruction in instruction_set:
+                      args = list(map(lambda arg: task_info[arg], instruction['arguments']))
+                      target=getattr(device, instruction['method'])(*args)
             
             delay_time += (time() - now)
 
         # check task not running then stop
         if self.check_running_task_not_run() == True:
-          self.mqtt_thread.broadcast_command('project:task ' + str(self._task_manager.running_task.name) + ' stop at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
+          if self._task_manager.running_task.type == '':
+            self.mqtt_thread.broadcast_command('project:task ' + str(self._task_manager.running_task.name) + ' stop at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
           self._task_manager.running_task.stop()
         
         # check project done then close project
@@ -200,17 +270,43 @@ class Project(threading.Thread):
         return False
     return True
   
+  def set_content(self, content):
+    self.running_task.button_trigger = True
+  
+  def set_cycle(self, index, content):
+    # change cycle name
+    for key in content:
+      self.cycle[index][key] = content[key]
+
+    # change task name
+    # self._task_manager.get_task_by_uuid(self.cycle[index]['range'][0]).name = content['name']
+    # self._task_manager.get_task_by_uuid(self.cycle[index]['range'][1]).name = content['name']
+  
   def check_running_task_not_run(self):
     # if no running task
     if self._task_manager.running_task == None:
       return False
-
+    
+    # if running is cycle then no need to stop by device
+    if self._task_manager.running_task.type == 'cycle':
+      return False
+    
+    for key in self._task_manager.running_task.action:
+      # print('action key', key, self._task_manager.running_task, self._task_manager.running_task.action[key])
+      if len(self._task_manager.running_task.parameter_set) == 0 and self._task_manager.running_task.action[key]['type'] == 'stop':
+        return False
+      if len(self._task_manager.running_task.parameter_set) == 0 and self._task_manager.running_task.action[key]['type'] == 'idle':
+        return False
+      
     for device in self._task_manager.running_task.device:
       if self._complete_device[device].status == 1:
         return False
     return True
   
   def as_json(self):
+    running_task = None
+    if self._task_manager.running_task is not None:
+      running_task = self._task_manager.running_task.as_json()
     data = {
       'id': self._id,
       'name': self._name,
@@ -219,6 +315,7 @@ class Project(threading.Thread):
       'status': self._status,
       'device': self._device,
       'task': self.task_list,
-      'running_task': self._task_manager.running_task.as_json()
+      'running_task': running_task,
+      'cycle': self._cycle
     }
     return data

python/biopro/project/project_manager.py

@@ -9,13 +9,14 @@ def json_stringify(o: Any) -> str:
     return _json_stringify(o, separators=(',', ':'))
 
 class ProjectManager():
-    def __init__(self, device_manager: DeviceManager, mqtt_thread=None) :
+    def __init__(self, device_manager: DeviceManager, mqtt_thread=None, log_verbose = None) :
         self._project_list = []
         self._mqtt_thread =  mqtt_thread
         self._device_manager = device_manager
+        self.log_verbose = log_verbose
     
     def create(self, project):
-      new_project = Project(project, self._device_manager, self._mqtt_thread)
+      new_project = Project(project, self._device_manager, self._mqtt_thread, self.log_verbose)
       self._project_list.append(new_project)
       return new_project
 
@@ -37,3 +38,11 @@ class ProjectManager():
     def stop_project(self, project):
       _project = self.get(project)
       _project.stop()
+    
+    def set_project(self, project_uuid, content):
+      _project = self.get(project_uuid)
+      _project.set_content(content)
+    
+    def set_project_cycle(self, project_uuid, index, content):
+      _project = self.get(project_uuid)
+      _project.set_cycle(index, content)

python/biopro/project/task.py

@@ -12,29 +12,39 @@ key_list = {
 class Task:
   def __init__(self, task):
     self._id = None
+    self._uuid = None
+    self._type = None
     self._name = None
     self._parent = None
     self._cycle = None
+    self._cycle_count = 0
+    self._cycle_next = None
+    self._cycle_next_uuid = None
     self._device = None
     self._event = None
     self._trigger = None
     self._parameter_set = None
     self._condition = None
     self._action = None
-    # -1: initial 0: start(idle), 1: running, 2: close(idle)
+    # -1: init 0: start(idle), 1: run, 2: close(idle)
     self._status = 0
     self._next = None
 
+    # action & condition info
     self._condition_list: List[Condition] = []
     self._action_list: List[Action] = []
     self._instruction_list = []
     self._record_list = []
 
+    # time info
     self._start_time = []
     self._idle_time = []
     self._end_time = []
     self._period = None
 
+    # trigger info
+    self._button_trigger = False
+
     self.load_task(task)
   
   def load_task(self, task) -> None:
@@ -74,6 +84,14 @@ class Task:
   @uuid.setter
   def uuid(self, new_uuid):
     self._uuid = new_uuid
+
+  @property
+  def type(self):
+    return self._type
+  
+  @type.setter
+  def type(self, new_type):
+    self._type = new_type
   
   @property
   def name(self):
@@ -100,6 +118,31 @@ class Task:
   @cycle.setter
   def cycle(self, new_cycle):
     self._cycle = new_cycle
+
+  # TODO: not sure needed?
+  @property
+  def cycle_count(self) -> int:
+    return self._cycle_count
+  
+  @cycle_count.setter
+  def cycle_count(self, new_cycle_count):
+    self._cycle_count = new_cycle_count
+    
+  @property
+  def cycle_next(self) -> str:
+    return self._cycle_next
+  
+  @cycle_next.setter
+  def cycle_next(self, new_cycle_next):
+    self._cycle_next = new_cycle_next
+
+  @property
+  def cycle_next_uuid(self) -> str:
+    return self._cycle_next_uuid
+  
+  @cycle_next_uuid.setter
+  def cycle_next_uuid(self, new_cycle_next_uuid):
+    self._cycle_next_uuid = new_cycle_next_uuid
   
   @property
   def device(self) -> dict:
@@ -177,6 +220,14 @@ class Task:
   def end_time(self) -> List:
     return self._end_time
   
+  @property
+  def button_trigger(self) -> List:
+    return self._button_trigger
+  
+  @button_trigger.setter
+  def button_trigger(self, button_trigger):
+    self._button_trigger = button_trigger
+  
   def new_start_time(self):
     self._start_time.append(time())
   
@@ -207,6 +258,10 @@ class Task:
   
   def stop(self):
     self.status = 2
+  
+  def reset(self):
+    self.status = -1
+    # self.status = 0
 
   def get_match_action_list(self, match_condition_list):
     return map(lambda condition: [x for x in self._action_list if condition.id in x.get_condition_list()], match_condition_list)
@@ -230,7 +285,7 @@ class Task:
     return {
       'device': action.target,
       'parameter': self.get_parameter_set_by_device(action.target),
-      'file_name': self._name + '-' + str(action.target),
+      'file_name': self._name,
       'parent': self.parent,
       'instruction': _type
     }
@@ -240,7 +295,12 @@ class Task:
       'id': self.id,
       'name': self.name,
       'parent': self.parent,
+      'type': self.type,
+      'uuid': self.uuid,  
       'cycle': self.cycle,
+      'cycle_count': self.cycle_count,
+      'cycle_next': self.cycle_next,
+      'cycle_next_uuid': self.cycle_next_uuid,
       'device': self.device,
       'event': self.event,
       'trigger': self.trigger,

python/biopro/project/task_manager.py

@@ -12,11 +12,12 @@ def json_stringify(o: Any) -> str:
     return _json_stringify(o, separators=(',', ':'))
 
 class TaskManager():
-    def __init__(self, task_list):
+    def __init__(self, task_list, cycle_list):
       self._task_list = []
       self._next_task = []
       self._prev_task = None
       self._running_task = None
+      self._cycle_list = cycle_list
       
       self.load_task_list(task_list)
 
@@ -44,6 +45,23 @@ class TaskManager():
     def next_task(self):
       return self._next_task
 
+    def get_task_by_index(self, index):
+      return self._task_list[index]
+
+    def get_task_by_uuid(self, uuid):
+      return next((x for x in self.task_list if x.uuid == uuid), None)
+    
+    def get_index_by_task(self, task):
+      return next((i for i, x in enumerate(self.task_list) if x.uuid == task.uuid), None)
+    
+    def get_index_by_uuid(self, uuid):
+      return next((i for i, x in enumerate(self.task_list) if x.uuid == uuid), None)
+
+    def check_task_is_cycle_end(self, task):
+      for index, cycle in enumerate(self._cycle_list):
+        if cycle['range'][1] == task.uuid:
+          return index
+
     @property
     def check_list(self):
       return [self._running_task, *self._next_task]
@@ -57,7 +75,8 @@ class TaskManager():
         task = Task(task) 
         self._task_list.append(task)
     
-    def set_running_task(self, task):
+    # original version
+    """ def set_running_task(self, task):
       try:
         # if there is task running & same task active ,then reject
         if self._running_task != None and self._running_task.uuid == task.uuid:
@@ -80,6 +99,51 @@ class TaskManager():
           _task = next((task for task in self._task_list if task.uuid == task_uuid), None)
           if _task != None:
             self._next_task.append(_task)
+      except RuntimeError as e:
+        print(e) """
+      
+    def set_running_task(self, task):
+      try:
+        # if there is task running & same task active ,then reject
+        if self._running_task != None and self._running_task.uuid == task.uuid:
+          return False
+
+        # save task
+        self._prev_task = self._running_task
+        # clear next task list
+        self._next_task.clear()
+        # set task to running_task
+        self._running_task = task
+        self._running_task.run()
+
+        # if previous task is still running, then need to close
+        if self._prev_task != None:
+          if self._prev_task.status == 1:
+            self._prev_task.stop()
+        # if reach cycle end, count < max, then go to cycle start
+        cycle_index = self.check_task_is_cycle_end(task)
+        if cycle_index is None:
+          # print('next', self._running_task.name, self._running_task.next)
+          for task_uuid in self._running_task.next:
+            _task = next((task for task in self._task_list if task.uuid == task_uuid), None)
+            if _task != None:
+              _task.reset()
+              self._next_task.append(_task)
+          # print('self._next_task', self._next_task)
+        else:
+          # print('cycle', self._cycle_list[cycle_index])
+          cycle = self._cycle_list[cycle_index]
+          if int(cycle['count']) < int(cycle['max']):
+            self._next_task.append(self.get_task_by_uuid(cycle['range'][0]))
+            cycle['count'] += 1
+          else:
+            for task_uuid in self._running_task.next:
+              _task = next((task for task in self._task_list if task.uuid == task_uuid), None)
+              if _task != None:
+                _task.reset()
+                self._next_task.append(_task)
+            cycle['count'] = 1
+
       except RuntimeError as e:
         print(e)
 

python/biopro/recording/file.py

@@ -1131,14 +1131,17 @@ class RecordingFileWriter:
         self._splitting_size = 0
         return None
 
-    def close(self):
-        # if self._recording_file is not None:
-        #     self._recording_file.close()
-        #     self._recording_file = None
-        print('close1')
+    def close(self, mqtt_thread):
         self._close = True
         if len(self._recording_file_dict) > 0:
             for ch in self._data_db.keys():
+                if len(self._data_rl[ch]) > 0:
+                    self._data_rl[ch].append(str(int(self._time_now)))
+                    mes = ' '.join(self._data_rl[ch])
+                    mqtt_thread[ch].on_message(mes)
+                    self._data_rl[ch].clear()
+                    self._send_data[ch] = False
+
                 if self._recording_file_dict[ch]._status:
                     _data = ' '.join(self._data_db[ch])
                     self._raw_save['data'][ch] = _data

python/biopro/server/data.py

@@ -65,7 +65,7 @@ class DataServer(SocketServer, DataAPI):
         """
         global _FLAG_DATA_LOST_STATS_
 
-        super().__init__(DataAPI, 'DataServer', self.ADDR, socket_listen=3)
+        super().__init__(DataAPI, 'DataServer', self.ADDR, socket_listen=20)
 
         data_options = DataServerOptions.get_options(*options)
 
@@ -117,6 +117,9 @@ class DataServer(SocketServer, DataAPI):
         self.database_process = DataBaseProcess('data_server', self.log_verbose, self._queue_db, self._queue_ds_dict, self._queue_msg)
         self.database_process.start()
 
+        # self._no_data_total_duration = 0
+        # self._recv_memory_cost_time = 0
+
     @logging_info
     def setup(self):
         self._available_channel.clear()
@@ -643,6 +646,7 @@ class DataServer(SocketServer, DataAPI):
     def whether_to_record(self, device):
         # if user click "start", return True; if user click "stop", return False;
         if device in self._configurations.keys() and self._configurations[device] is not None:
+            # print(self._configurations.keys(), ',', device, datetime.now())
             return True
         else:
             return False
@@ -651,6 +655,9 @@ class DataServer(SocketServer, DataAPI):
         ret = False
         sync = self.get_spi_obj()
 
+        busy = sync.get_pin_busy()
+        print('pin_busy=', busy, device, datetime.now())
+
         if sync.get_pin_mem_req() == sync.get_pin_ram_sel():
             spi_data = sync.recv_memory(device)
             signal = sync.get_pin_mem_req()
@@ -659,14 +666,27 @@ class DataServer(SocketServer, DataAPI):
 
         else:
             data = None
+            print('data=None, mem_req!=ram_sel, [', sync.get_pin_mem_req(), ', ', sync.get_pin_ram_sel(), ']', device, datetime.now())
 
         if data is not None:
-            if self._configurations[device].queue_flag:
-                self._configurations[device].queue_flag = False
-                print("q size= ", self._configurations[device]._queue_rec.qsize())
-
-            self._configurations[device].put_rec_queue(data)
-            ret = True
+            if self._configurations.get(device, None) != None:
+                if self._configurations[device].queue_flag:
+                    self._configurations[device].queue_flag = False
+                    print("q size= ", self._configurations[device]._queue_rec.qsize())
+            
+            if self._configurations.get(device, None) != None:
+                self._configurations[device].put_rec_queue(data)
+                # self._no_data_total_duration = 0
+                ret = True
+        # else:
+        #     time_diff = time() - self._recv_memory_cost_time
+        #     self._no_data_total_duration += time_diff
+        #     if self._no_data_total_duration > 1:
+        #         print('data is None', device, datetime.now(), self._no_data_total_duration)
+        #         print("sync.get_pin_mem_req() != sync.get_pin_ram_sel()")
+        #         print("no~", sync.select, sync.get_pin_mem_req(), sync.get_pin_ram_sel(), datetime.now())
+        #         print()
+        # self._recv_memory_cost_time = time()
 
         return ret
 
@@ -686,6 +706,9 @@ class DataServer(SocketServer, DataAPI):
                 self.mqtt_thread.publish('device_instruction', json_stringify(content), inter = True)
 
         return True
+    
+    def show_data(self, device):
+        self._configurations[device].put_rec_queue('show_data')
 
 class DataRuntime(metaclass=abc.ABCMeta):
     __slots__ = ('_server', '_device', '_meta_file', '_data_format',

python/biopro/server/main.py

@@ -105,7 +105,7 @@ class ControlServer(SocketServer, ControlServerAPI):
         # device detect
         self._detect_device_thread = RoutineConnectDeviceThread(self._device_manager, self.mqtt_thread, self.led_thread, 3)
 
-        self._project_manager = ProjectManager(self.device_manager, self.mqtt_thread)
+        self._project_manager = ProjectManager(self.device_manager, self.mqtt_thread, self.log_verbose)
 
         if not c.flag_disable_led_control:
             self.led_thread.set_state(LED.COLOR_RED)
@@ -819,12 +819,18 @@ class ControlServer(SocketServer, ControlServerAPI):
         return True
 
     @logging_info
-    def device_battery(self) -> List[int]:
-        device_list = self.device_manager.list_device()
-        if len(device_list) > 0:
-            battery_list = list(map(lambda x: self.device_manager.get_device(x).battery, device_list))
-
-        return battery_list
+    def device_battery(self, device:int) -> List[int]:
+        battery = {}
+        if device == 'all':
+            device_list = self.device_manager.list_device()
+            if len(device_list) > 0:
+                battery = list(map(lambda x: {"device": x.memory_board, "battery":self.device_manager.get_device(x).battery}, device_list))
+        else:
+            battery = {
+                "device": device,
+                "battery": self.device_manager.get_device(device).battery
+            }
+        return battery
 
     @logging_info
     def device_parent(self, device: int, content: Optional[str] = None) -> List[int]:
@@ -1015,6 +1021,7 @@ class ControlServer(SocketServer, ControlServerAPI):
     @logging_info
     def run_project(self, project) -> bool:
         if project is not None:
+            # print(project)
             project = self._project_manager.create(project)
             self._project_manager.run_project(project)
         return  project.as_json()
@@ -1024,6 +1031,18 @@ class ControlServer(SocketServer, ControlServerAPI):
         if project is not None:
             self._project_manager.stop_project(project)
         return True
+    
+    @logging_info
+    def set_project(self, project, content) -> bool:
+        if project is not None:
+            self._project_manager.set_project(project, content)
+        return True
+    
+    @logging_info
+    def set_project_cycle(self, project, index, content) -> bool:
+        if project is not None:
+            self._project_manager.set_project_cycle(project, index, content)
+        return True
 
     @logging_info
     def get_running_project(self) -> bool:
@@ -1339,6 +1358,13 @@ class ControlServer(SocketServer, ControlServerAPI):
         def _hardware_send_test_set(self, options: Dict[str, str]) -> bool:
             # TODO write options files
             return False
+        
+        @logging_info
+        def show_device_data(self, device: int):
+            client = self.data_server.client()
+            if client is not None:
+                with client:
+                    client.show_data(device)
 
 class _RandomCrashThread(ServerThread):
     def __init__(self):

python/biopro/server/recording.py

@@ -105,6 +105,9 @@ class RecordingProcess(Process):
         self._mem_tailer_len = 6
         self._single_data_len = self._elite_data_len + self._mem_header_len + self._mem_tailer_len
 
+        self._decoder = self.data_format()
+        self._start_time = time()
+
     def ensure_data_format(self) -> DataDecodeFormat:
         if isinstance(self._data_format, (str, bytes)):
             self._data_format = DataDecodeFormat.parse(self._data_format)
@@ -133,9 +136,9 @@ class RecordingProcess(Process):
             decoder._prev_data = self._prev_data
             decoder._prev_delta_time = self._prev_delta_time
             decoder._prev_time_stamp = self._prev_time_stamp
-        # elif isinstance(decoder, I4V4Z4T4DataDecoder):
+        elif isinstance(decoder, I4V4Z4T4DataDecoder):
             # get cycle_time from meta file
-            # decoder._mode = self._meta_file.configuration.MODE
+            decoder._mode = self._meta_file.configuration.get_parameter('MODE')
             # decoder._cycle_start_time = self._cycle_start_time
         elif isinstance(decoder, NeuliveThreeOneDataDecoder):
             # get amp_gain from meta file
@@ -151,9 +154,8 @@ class RecordingProcess(Process):
             decoder._prev_time_stamp = self._prev_time_stamp
         elif isinstance(decoder, EISZeroOneDataDecoder):
             # get amp_gain from meta file
-
-            decoder._ac_amp = self._meta_file.configuration.get_parameter('AC_AMP')
             decoder._mode = self._meta_file.configuration.get_parameter('MODE')
+            decoder._ac_amp = self._meta_file.configuration.get_parameter('AC_AMP')
             decoder._freq_start = self._meta_file.configuration.get_parameter('FREQ_START')
             decoder._freq_stop = self._meta_file.configuration.get_parameter('FREQ_STOP')
 
@@ -183,6 +185,8 @@ class RecordingProcess(Process):
                 self.final_write()
                 self.is_closed = True
                 return False
+            elif q == 'show_data':
+                self._decoder._show_data = not self._decoder._show_data
             else:
                 self.rec_update()
                 self.sync_data(q)
@@ -200,14 +204,13 @@ class RecordingProcess(Process):
                 self._isTimeOut = True
         self._timer = current_time
 
-        decoder = self.data_format()
         # print('sync_data')
         # print('data',data)
 
         # print('server/data', self._prev_delta_time,self._prev_time_stamp, self._prev_data)
 
         if data is None or len(data) == 0:
-            result = decoder.decode(b'')
+            result = self._decoder.decode(b'')
             if result is not None:
                 ret = result
 
@@ -221,26 +224,13 @@ class RecordingProcess(Process):
             for offset, section in self._foreach_data_section(data):
             # for section in self._neu_foreach_data_section(data):
 
-                result = decoder.decode(section)
+                result = self._decoder.decode(section)
                 # if self._isTimeOut:
                 #     try:
                 #         print('result: ', result.data_size)
                 #     except:
                 #         pass
 
-                try:
-                    if isinstance(decoder, I4V4Z4T4DataDecoder) or isinstance(decoder, EISZeroOneDataDecoder):
-                        if decoder.isFinishMode is not None and decoder.isFinishMode() == 1:
-                            self._queue_msg.put(['ds', self._device, 'interrupt'])
-                            # content = {}
-                            # content['header'] = 'device_instruction/0'
-                            # content['device'] = result.device
-                            # content['instruction'] = 'interrupt'
-                            # self._mqtt_thread.publish('device_instruction',json_stringify(content), True)
-                            # self.server.stop_sync(self.device)
-                except RuntimeError as e:
-                    print(e)
-
                 if result is not None:
                     ##
                     if len(self._mqtt_send_data_ch_level) == 0:
@@ -257,9 +247,27 @@ class RecordingProcess(Process):
                 self._writer.channels_update(ret[0].channels())
             self._writer.write(ret, self._mqtt_send_data_ch_level)
         # print('write time: ', time() - ctime1)
-
         # print(ret)
 
+        try:
+            time_duration = self._meta_file.configuration.get_parameter('TIME_DURATION')
+            if time_duration and time_duration is not 0 and time() - self._start_time >= time_duration:
+                self._queue_msg.put(['ds', self._device, 'interrupt'])
+                return None
+
+            if isinstance(self._decoder, I4V4Z4T4DataDecoder) or isinstance(self._decoder, EISZeroOneDataDecoder):
+                if self._decoder.isFinishMode is not None and self._decoder.isFinishMode() == 1:
+                    self._queue_msg.put(['ds', self._device, 'interrupt'])
+                    return None
+                    # content = {}
+                    # content['header'] = 'device_instruction/0'
+                    # content['device'] = result.device
+                    # content['instruction'] = 'interrupt'
+                    # self._mqtt_thread.publish('device_instruction',json_stringify(content), True)
+                    # self.server.stop_sync(self.device)
+        except RuntimeError as e:
+            print(e)
+
         del ret
         del data
         return 
@@ -350,7 +358,8 @@ class RecordingProcess(Process):
         if colum_total == 1:
             print('this ram data < 3 records, colum_total = ', colum_total)
             print('raw_data[0]', list(raw_data[0]))
-            return save
+            save = True
+            # return save
 
         elif colum_total == 2:
             print('this ram data < 3 records, colum_total = ', colum_total)
@@ -599,7 +608,7 @@ class RecordingProcess(Process):
 
     def final_write(self):
         if self._writer is not None:
-            return self._writer.close()
+            return self._writer.close(self._mqtt_send_data_ch_level)
         else:
             return False
     

python/biopro/util/socket.py

@@ -93,13 +93,15 @@ class SocketClient(metaclass=abc.ABCMeta):
         if self._socket is None:
             try:
                 self._socket = Socket(AF_UNIX, SOCK_STREAM)
-                self._socket.settimeout(1)
+                self._socket.settimeout(3)
                 self._socket.connect(self._socket_file)
-            except FileNotFoundError as e:
-                raise RuntimeError('server not available') from e
+            except Exception as e:
+                print('open_socket error:', e)
+            # except FileNotFoundError as e:
+            #     raise RuntimeError('server not available') from e
 
-            except ConnectionRefusedError as e:
-                raise RuntimeError('server crash') from e
+            # except ConnectionRefusedError as e:
+            #     raise RuntimeError('server crash') from e
 
     def close_socket(self):
         if self._socket is not None:

python/res/devlib/json/Elite_BAT_1.0.devlib.json

@@ -1,14 +1,15 @@
 {
-  "name": "EliteZM15",
+  "name": "Elite_BAT_1.0",
   "version": "1.2.30",
   "match_rule": {
     "local_name_pattern": "Elite.*",
     "major_product_number": 0,
-    "minor_product_number": 2,
+    "minor_product_number": 3,
     "major_version_number": 1,
-    "minor_version_number": 6
+    "minor_version_number": 0
   },
   "constant": {
+    "TIME_MAX": 100000,
     "VOLT_MAX": 65536,
     "Const_Current_Range": 1500001,
     "BLE_WRITE_MAX": 255
@@ -113,6 +114,20 @@
         "expression": "VALUE"
       }
     },
+    "DPV_curr_rec": {
+      "description": "DPV current recording period start",
+      "record_meta": true,
+      "initial": [
+        25,
+        100
+      ],
+      "domain": {
+        "list": [
+          101
+        ]
+      },
+      "value": "VALUE"
+    },
     "DPV_curr_rec_min": {
       "description": "DPV current recording period start",
       "record_meta": true,
@@ -138,11 +153,8 @@
     "DPV_pulse_option": {
       "description": "Invert of pulse option",
       "record_meta": true,
-      "initial": 0,
-      "value": [
-        0,
-        1
-      ]
+      "domain": "bool",
+      "initial": false
     },
     "DPV_mode": {
       "description": "AUTO: 0 / ADVANCED: 1/ ENGINEERING: 2",
@@ -157,11 +169,24 @@
     "DPV_engineering_enable": {
       "description": "Engineering mode switch",
       "record_meta": true,
-      "initial": 0,
-      "value": [
-        0,
-        1
-      ]
+      "domain": "bool",
+      "initial": false
+    },
+    "V_initial": {
+      "description": "Pulse Mode Segment Voltage",
+      "record_meta": true,
+      "initial": [
+        50000,
+        25000,
+        25000,
+        25000
+      ],
+      "domain": {
+        "list": [
+          50001
+        ]
+      },
+      "value": "VALUE"
     },
     "V_initial_0": {
       "description": "Pulse Mode Segment Voltage 0",
@@ -207,6 +232,22 @@
         "expression": "VALUE"
       }
     },
+    "t_pulse": {
+      "description": "Pulse Mode Segment Duration",
+      "record_meta": true,
+      "initial": [
+        750,
+        9250,
+        1000,
+        1000
+      ],
+      "domain": {
+        "list": [
+          1000001
+        ]
+      },
+      "value": "VALUE"
+    },
     "t_pulse_0": {
       "description": "Pulse Mode Segment Duration 0",
       "record_meta": true,
@@ -251,6 +292,36 @@
         "expression": "VALUE"
       }
     },
+    "CURR_REC": {
+      "description": "Pulse Mode Current Recording Period",
+      "record_meta": true,
+      "initial": [
+        [
+          35,
+          90
+        ],
+        [
+          35,
+          99
+        ],
+        [
+          35,
+          95
+        ],
+        [
+          35,
+          95
+        ]
+      ],
+      "domain": {
+        "list": {
+          "list": [
+            100
+          ]
+        }
+      },
+      "value": "VALUE"
+    },
     "CURR_REC_START_0": {
       "description": "Pulse Mode Current Recording Period Start",
       "record_meta": true,
@@ -339,6 +410,40 @@
         "expression": "VALUE"
       }
     },
+    "segment_ui_order": {
+      "description": "Pulse Mode Segment Order",
+      "record_meta": true,
+      "initial": [
+        0,
+        1,
+        -1,
+        -1
+      ],
+      "domain": {
+        "list": [
+          -1,
+          6
+        ]
+      },
+      "value": "VALUE"
+    },
+    "segment_order": {
+      "description": "Pulse Mode Segment Order",
+      "record_meta": true,
+      "initial": [
+        0,
+        1,
+        -1,
+        -1
+      ],
+      "domain": {
+        "list": [
+          -1,
+          6
+        ]
+      },
+      "value": "VALUE"
+    },
     "segment_ui_order_0": {
       "description": "Pulse Mode Segment UI Order 0, value: segment ID + 1",
       "record_meta": true,
@@ -686,6 +791,15 @@
         "expression": "VALUE"
       }
     },
+    "CC_CP_SPEED": {
+      "description": "charge speed for CC and CP mode",
+      "initial": 1,
+      "value": [
+        "low",
+        "normal",
+        "high"
+      ]
+    },
     "ADC_LEVEL_I_15": {
       "description": "ADC level",
       "record_meta": true,
@@ -763,6 +877,17 @@
         "s",
         "ms"
       ]
+    },
+    "TIME_DURATION": {
+      "description": "Run duration",
+      "record_meta": true,
+      "initial": 0,
+      "domain": [
+        "TIME_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
     }
   },
   "instruction": {
@@ -849,7 +974,7 @@
           "13": "curve_ocp",
           "14": "curve_pulse_sensing",
           "15": "curve_dpv",
-          "16": "curve_const_vscan"
+          "16": "curve_cp"
         }
       },
       {
@@ -1047,6 +1172,7 @@
         "vb": "Const_Current_value",
         "vc": "VOLTSTOP_MAX",
         "vd": "VOLTSTOP_MIN",
+        "ve": "CC_CP_SPEED",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",
@@ -1058,7 +1184,31 @@
         "B>va;4B>vb;2B>vc;2B>vd;",
         "4b>pa;4b>pb;",
         "4b>pc;4b>pd;",
-        "2B>pe"
+        "2B>pe;",
+        "4b>0b0001;4b>ve"
+      ]
+    },
+    "curve_cp": {
+      "type": "RIS",
+      "parameter": {
+        "va": "Charge",
+        "vb": "Const_Current_value",
+        "vc": "VOLTSTOP_MAX",
+        "vd": "VOLTSTOP_MIN",
+        "ve": "CC_CP_SPEED",
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pc": "DAC_LEVEL_V_OUT_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE"
+      },
+      "data": [
+        "X0C;",
+        "B>va;4B>vb;2B>vc;2B>vd;",
+        "4b>pa;4b>pb;",
+        "4b>pc;4b>pd;",
+        "2B>pe;",
+        "4b>0b0000;4b>ve"
       ]
     },
     "curve_cv3": {
@@ -1184,39 +1334,39 @@
     },
     "curve_pulse_sensing": [
       {
-        "expression": "segment_ui_order_0",
+        "expression": "segment_ui_order[0]",
         "when": {
-          "1": "pul_sen_segment_0",
-          "2": "pul_sen_segment_1",
-          "3": "pul_sen_segment_2",
-          "4": "pul_sen_segment_3"
+          "0": "pul_sen_segment_0",
+          "1": "pul_sen_segment_1",
+          "2": "pul_sen_segment_2",
+          "3": "pul_sen_segment_3"
         }
       },
       {
-        "expression": "segment_ui_order_1",
+        "expression": "segment_ui_order[1]",
         "when": {
-          "1": "pul_sen_segment_0",
-          "2": "pul_sen_segment_1",
-          "3": "pul_sen_segment_2",
-          "4": "pul_sen_segment_3"
+          "0": "pul_sen_segment_0",
+          "1": "pul_sen_segment_1",
+          "2": "pul_sen_segment_2",
+          "3": "pul_sen_segment_3"
         }
       },
       {
-        "expression": "segment_ui_order_2",
+        "expression": "segment_ui_order[2]",
         "when": {
-          "1": "pul_sen_segment_0",
-          "2": "pul_sen_segment_1",
-          "3": "pul_sen_segment_2",
-          "4": "pul_sen_segment_3"
+          "0": "pul_sen_segment_0",
+          "1": "pul_sen_segment_1",
+          "2": "pul_sen_segment_2",
+          "3": "pul_sen_segment_3"
         }
       },
       {
-        "expression": "segment_ui_order_3",
+        "expression": "segment_ui_order[3]",
         "when": {
-          "1": "pul_sen_segment_0",
-          "2": "pul_sen_segment_1",
-          "3": "pul_sen_segment_2",
-          "4": "pul_sen_segment_3"
+          "0": "pul_sen_segment_0",
+          "1": "pul_sen_segment_1",
+          "2": "pul_sen_segment_2",
+          "3": "pul_sen_segment_3"
         }
       },
       "pul_sen_start"
@@ -1240,11 +1390,11 @@
     "pul_sen_segment_0": {
       "type": "RIS",
       "parameter": {
-        "va": "V_initial_0",
-        "vb": "t_pulse_0",
-        "vc": "CURR_REC_START_0",
-        "vd": "CURR_REC_END_0",
-        "ve": "segment_order_0 - 1",
+        "va": "V_initial[0]",
+        "vb": "t_pulse[0]",
+        "vc": "CURR_REC[0][0]",
+        "vd": "CURR_REC[0][1]",
+        "ve": "segment_order.index(segment_order[0])",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",
@@ -1260,11 +1410,11 @@
     "pul_sen_segment_1": {
       "type": "RIS",
       "parameter": {
-        "va": "V_initial_1",
-        "vb": "t_pulse_1",
-        "vc": "CURR_REC_START_1",
-        "vd": "CURR_REC_END_1",
-        "ve": "segment_order_1 - 1",
+        "va": "V_initial[1]",
+        "vb": "t_pulse[1]",
+        "vc": "CURR_REC[1][0]",
+        "vd": "CURR_REC[1][1]",
+        "ve": "segment_order.index(segment_order[1])",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",
@@ -1280,11 +1430,11 @@
     "pul_sen_segment_2": {
       "type": "RIS",
       "parameter": {
-        "va": "V_initial_2",
-        "vb": "t_pulse_2",
-        "vc": "CURR_REC_START_2",
-        "vd": "CURR_REC_END_2",
-        "ve": "segment_order_2 - 1",
+        "va": "V_initial[2]",
+        "vb": "t_pulse[2]",
+        "vc": "CURR_REC[2][0]",
+        "vd": "CURR_REC[2][1]",
+        "ve": "segment_order.index(segment_order[2])",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",
@@ -1300,11 +1450,11 @@
     "pul_sen_segment_3": {
       "type": "RIS",
       "parameter": {
-        "va": "V_initial_3",
-        "vb": "t_pulse_3",
-        "vc": "CURR_REC_START_3",
-        "vd": "CURR_REC_END_3",
-        "ve": "segment_order_3 - 1",
+        "va": "V_initial[3]",
+        "vb": "t_pulse[3]",
+        "vc": "CURR_REC[3][0]",
+        "vd": "CURR_REC[3][1]",
+        "ve": "segment_order.index(segment_order[3])",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",
@@ -1365,8 +1515,8 @@
       "parameter": {
         "va": "DPV_step_time",
         "vb": "DPV_notify_rate",
-        "vc": "DPV_curr_rec_min",
-        "vd": "DPV_curr_rec_max"
+        "vc": "DPV_curr_rec[0]",
+        "vd": "DPV_curr_rec[1]"
       },
       "data": [
         "1X0E;",
@@ -1429,8 +1579,8 @@
       "parameter": {
         "va": "DPV_step_time",
         "vb": "DPV_notify_rate",
-        "vc": "DPV_curr_rec_min",
-        "vd": "DPV_curr_rec_max"
+        "vc": "DPV_curr_rec[0]",
+        "vd": "DPV_curr_rec[1]"
       },
       "data": [
         "1X10;",
@@ -1483,16 +1633,6 @@
     "dpv_engineering_mode_advanced": [
       "dpv_advanced_mode"
     ],
-    "VIS_CC_ZERO": [
-      "_data_format('I4V4Z4T4')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "set_adc_gain_I",
-      "set_adc_gain_Vin",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"

python/res/devlib/json/Elite_EDC_1.4.devlib.json

@@ -1,5 +1,5 @@
 {
-  "name": "EliteZM02",
+  "name": "Elite_EDC_1.4",
   "version": "1.2.30",
   "match_rule": {
     "local_name_pattern": "Elite.*",
@@ -492,14 +492,6 @@
         "1XC0;1X02;4B>ve;2B>vf;4B>vg;B>cn"
       ]
     },
-    "VIS_CC_ZERO": [
-      "_data_format('I4V4Z4T4')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
     "curve_cv3_high_cycle": {
       "type": "RIS",
       "parameter": {

python/res/devlib/json/Elite_EIS_1.0.devlib.json

@@ -1,5 +1,5 @@
 {
-  "name": "EliteEIS",
+  "name": "Elite_EIS_1.0",
   "version": "1.2.30",
   "match_rule": {
     "local_name_pattern": "Elite.*",
@@ -11,9 +11,21 @@
   "constant": {
     "FREQ_MAX": 4294967296,
     "VOLT_MAX": 65536,
-    "BLE_WRITE_MAX": 255
+    "BLE_WRITE_MAX": 255,
+    "TIME_MAX": 100000
   },
   "parameters": {
+    "TIME_DURATION": {
+      "description": "Run duration",
+      "record_meta": true,
+      "initial": 0,
+      "domain": [
+        "TIME_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
     "CHANNEL": {
       "derzteription": "record channels",
       "record_meta": true,
@@ -48,20 +60,35 @@
       "description": "working mode",
       "record_meta": true,
       "value": [
-          "EIS CURVE",
-          "Cyclic Voltammetry",
-          "Dev Mode"
+        "EIS CURVE",
+        "Cyclic Voltammetry",
+        "Chronoamperometric",
+        "Dev Mode"
       ]
     },
+    "FREQ": {
+      "description": "DPV current recording period start",
+      "record_meta": true,
+      "initial": [
+        13333333,
+        7
+      ],
+      "domain": {
+        "list": [
+          "FREQ_MAX"
+        ]
+      },
+      "value": "VALUE"
+    },
     "FREQ_START": {
       "description": "Start of Freq Scan",
       "record_meta": true,
       "initial": 13422819,
       "domain": [
-          "FREQ_MAX"
+        "FREQ_MAX"
       ],
       "value": {
-          "expression": "VALUE"
+        "expression": "VALUE"
       }
     },
     "FREQ_STOP": {
@@ -69,10 +96,10 @@
       "record_meta": true,
       "initial": 7,
       "domain": [
-          "FREQ_MAX"
+        "FREQ_MAX"
       ],
       "value": {
-          "expression": "VALUE"
+        "expression": "VALUE"
       }
     },
     "DELAY": {
@@ -91,21 +118,21 @@
       "record_meta": true,
       "initial": 8,
       "value": [
-          2,
-          4,
-          8,
-          16
+        2,
+        4,
+        8,
+        16
       ]
     },
     "DC_BIAS": {
       "description": "DC voltage bias in mV",
       "record_meta": true,
-      "initial": 15000,
+      "initial": 25000,
       "domain": [
-          35001
+        "VOLT_MAX"
       ],
       "value": {
-          "expression": "VALUE"
+        "expression": "VALUE"
       }
     },
     "AC_AMP": {
@@ -113,7 +140,7 @@
       "record_meta": true,
       "initial": 25,
       "domain": [
-          2048
+        2048
       ]
     },
     "SCALE": {
@@ -121,8 +148,8 @@
       "record_meta": true,
       "initial": 0,
       "value": [
-          0,
-          1
+        0,
+        1
       ]
     },
     "PPD": {
@@ -130,7 +157,7 @@
       "record_meta": true,
       "initial": 10,
       "domain": [
-          11
+        11
       ]
     },
     "RTIA": {
@@ -138,11 +165,11 @@
       "record_meta": true,
       "initial": 4,
       "value": [
-          0,
-          1,
-          2,
-          3,
-          4
+        0,
+        1,
+        2,
+        3,
+        4
       ]
     },
     "ADC_VALUE_I": {
@@ -154,10 +181,10 @@
       "record_meta": true,
       "initial": 10000,
       "domain": [
-          100001
+        100001
       ],
       "value": {
-          "expression": "VALUE"
+        "expression": "VALUE"
       }
     },
     "CTRL_HIGH_Z_15": {
@@ -239,12 +266,23 @@
         "expression": "VALUE"
       }
     },
+    "VOLT_VSCAN": {
+      "description": "Voltage of VScan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
     "BLE_WRITE": {
       "description": "send msg to elite",
       "domain": {
-          "list": [
+        "list": [
           "BLE_WRITE_MAX"
-          ]
+        ]
       },
       "initial": "[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]",
       "value": "VALUE"
@@ -259,7 +297,7 @@
       {
         "expression": "MODE",
         "when": {
-        "*": "start_data"
+          "*": "start_data"
         }
       }
     ],
@@ -269,20 +307,23 @@
       {
         "expression": "MODE",
         "when": {
-          "1": "set_adc_gain_I"
+          "1": "set_adc_gain_I",
+          "2": "set_adc_gain_I"
         }
       },
       {
         "expression": "MODE",
         "when": {
-          "1": "set_adc_gain_Vin"
+          "1": "set_adc_gain_Vin",
+          "2": "set_adc_gain_Vin"
         }
       },
       {
         "expression": "MODE",
         "when": {
           "0": "curve_eis",
-          "1": "curve_cv3"
+          "1": "curve_cv3",
+          "2": "curve_const_vscan"
         }
       },
       {
@@ -339,8 +380,8 @@
     "curve_eis": {
       "type": "RIS",
       "parameter": {
-        "fa": "FREQ_START",
-        "fb": "FREQ_STOP",
+        "fa": "FREQ[0]",
+        "fb": "FREQ[1]",
         "dp": "DELAY",
         "dc": "DC_BIAS",
         "am": "AC_AMP",
@@ -356,8 +397,8 @@
     "curve_eis_para2": {
       "type": "RIS",
       "parameter": {
-        "fa": "FREQ_START",
-        "fb": "FREQ_STOP",
+        "fa": "FREQ[0]",
+        "fb": "FREQ[1]",
         "dp": "DELAY",
         "dc": "DC_BIAS",
         "am": "AC_AMP",
@@ -398,14 +439,23 @@
         "1XD2;1X02;4B>ve;2B>vf;2B>cn"
       ]
     },
-    "VIS_CC_ZERO": [
-      "_data_format('EISZeroOne')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
+    "curve_const_vscan": {
+      "type": "RIS",
+      "parameter": {
+        "va": "VOLT_VSCAN",
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE"
+      },
+      "data": [
+        "1XD3;",
+        "2B>va;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe"
+      ]
+    },
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"
@@ -430,4 +480,4 @@
       "_cdr('20X>ADC_VALUE_I')"
     ]
   }
-}
+}

python/res/devlib/json/Elite_EIS_1.1.devlib.json

@@ -0,0 +1,515 @@
+{
+  "name": "Elite_EIS_1.1",
+  "version": "1.2.30",
+  "match_rule": {
+    "local_name_pattern": "Elite.*",
+    "major_product_number": 0,
+    "minor_product_number": 4,
+    "major_version_number": 1,
+    "minor_version_number": 1
+  },
+  "constant": {
+    "FREQ_MAX": 4294967296,
+    "VOLT_MAX": 65536,
+    "BLE_WRITE_MAX": 255,
+    "TIME_MAX": 100000
+  },
+  "parameters": {
+    "TIME_DURATION": {
+      "description": "Run duration",
+      "record_meta": true,
+      "initial": 0,
+      "domain": [
+        "TIME_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CHANNEL": {
+      "derzteription": "record channels",
+      "record_meta": true,
+      "domain": "property",
+      "value": "[0, 1, 2]"
+    },
+    "CHANNEL_LABEL": {
+      "description": "channel label",
+      "record_meta": true,
+      "domain": "property",
+      "value": "['current', 'voltage', 'impedance']"
+    },
+    "SAMPLE_RATE": {
+      "description": "data sampling rate",
+      "record_meta": true,
+      "initial": 1000,
+      "domain": [
+        1001
+      ],
+      "value": {
+        "expression": "VALUE"
+      },
+      "on_change": "set_sample_rate"
+    },
+    "AMP_GAIN": {
+      "description": "amp gain",
+      "record_meta": true,
+      "domain": "constant",
+      "value": 1
+    },
+    "MODE": {
+      "description": "working mode",
+      "record_meta": true,
+      "value": [
+        "EIS CURVE",
+        "Cyclic Voltammetry",
+        "Chronoamperometric",
+        "V-T Graph",
+        "Dev Mode"
+      ]
+    },
+    "FREQ": {
+      "description": "DPV current recording period start",
+      "record_meta": true,
+      "initial": [
+        13333333,
+        7
+      ],
+      "domain": {
+        "list": [
+          "FREQ_MAX"
+        ]
+      },
+      "value": "VALUE"
+    },
+    "FREQ_START": {
+      "description": "Start of Freq Scan",
+      "record_meta": true,
+      "initial": 13422819,
+      "domain": [
+        "FREQ_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "FREQ_STOP": {
+      "description": "End of Freq Scan",
+      "record_meta": true,
+      "initial": 7,
+      "domain": [
+        "FREQ_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "DELAY": {
+      "description": "Wait x peroid before start taking measurements",
+      "record_meta": true,
+      "initial": 0,
+      "domain": [
+        101
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "AVERAGE_NUM": {
+      "description": "Number of sample used for average funciton",
+      "record_meta": true,
+      "initial": 8,
+      "value": [
+        2,
+        4,
+        8,
+        16
+      ]
+    },
+    "DC_BIAS": {
+      "description": "DC voltage bias in mV",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "AC_AMP": {
+      "description": "AC Amplitude in mV",
+      "record_meta": true,
+      "initial": 25,
+      "domain": [
+        2048
+      ]
+    },
+    "SCALE": {
+      "description": "Point spacing pattern",
+      "record_meta": true,
+      "initial": 0,
+      "value": [
+        0,
+        1
+      ]
+    },
+    "PPD": {
+      "description": "Point per decades",
+      "record_meta": true,
+      "initial": 10,
+      "domain": [
+        11
+      ]
+    },
+    "RTIA": {
+      "description": "High speed tia gain",
+      "record_meta": true,
+      "initial": 4,
+      "value": [
+        0,
+        1,
+        2,
+        3,
+        4
+      ]
+    },
+    "ADC_VALUE_I": {
+      "description": "ADC value current value",
+      "domain": "int"
+    },
+    "Scan_Rate": {
+      "description": "Voltage Scan Rate",
+      "record_meta": true,
+      "initial": 10000,
+      "domain": [
+        100001
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CTRL_HIGH_Z_15": {
+      "description": "ctrl highZ level",
+      "record_meta": true,
+      "initial": 1,
+      "value": [
+        "On",
+        "Off"
+      ],
+      "on_change": "set_ctrl_highZ"
+    },
+    "ADC_LEVEL_I_15": {
+      "description": "ADC level",
+      "record_meta": true,
+      "initial": 4,
+      "value": [
+        "0",
+        "1",
+        "2",
+        "3",
+        "auto"
+      ],
+      "on_change": "set_adc_gain_I"
+    },
+    "ADC_LEVEL_V_IN_15": {
+      "description": "ADC level",
+      "record_meta": true,
+      "initial": 3,
+      "value": [
+        "0",
+        "1",
+        "2",
+        "auto"
+      ],
+      "on_change": "set_adc_gain_Vin"
+    },
+    "VOLT_INITIAL": {
+      "description": "Initial Voltage of Scan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "VOLT_MAX": {
+      "description": "Max Voltage of Scan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "VOLT_MIN": {
+      "description": "Min Voltage of Scan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CYCLE_NUMBER": {
+      "description": "CV cycle number",
+      "record_meta": true,
+      "initial": 1,
+      "domain": [
+        65536
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "VOLT_VSCAN": {
+      "description": "Voltage of VScan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "MEASURE_VIN_RANGE": {
+      "description": "measure range of Vin",
+      "record_meta": true,
+      "initial": 0,
+      "value": [
+        "0",
+        "1",
+        "2",
+        "auto"
+      ]
+    },
+    "BLE_WRITE": {
+      "description": "send msg to elite",
+      "domain": {
+        "list": [
+          "BLE_WRITE_MAX"
+        ]
+      },
+      "initial": "[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]",
+      "value": "VALUE"
+    },
+    "BLE_READ": {
+      "description": "receive msg from elite",
+      "domain": "int"
+    }
+  },
+  "instruction": {
+    "start": [
+      {
+        "expression": "MODE",
+        "when": {
+          "*": "start_data"
+        }
+      }
+    ],
+    "start_data": [
+      "data_format_cali",
+      "_notify(True)",
+      {
+        "expression": "MODE",
+        "when": {
+          "1": "set_adc_gain_I",
+          "2": "set_adc_gain_I",
+          "3": "set_adc_gain_I"
+        }
+      },
+      {
+        "expression": "MODE",
+        "when": {
+          "1": "set_adc_gain_Vin",
+          "2": "set_adc_gain_Vin",
+          "3": "set_adc_gain_Vin"
+        }
+      },
+      {
+        "expression": "MODE",
+        "when": {
+          "0": "curve_eis",
+          "1": "curve_cv3",
+          "2": "curve_const_vscan",
+          "3": "curve_vt"
+        }
+      },
+      {
+        "expression": "MODE",
+        "when": {
+          "0": "curve_eis_para2",
+          "1": "curve_cv3_para2"
+        }
+      },
+      "_sync(True)",
+      "VIS_STI"
+    ],
+    "data_format": [
+      "_data_format('EISZeroOne')",
+      {
+        "expression": "MODE",
+        "when": {
+          "0": "_disable_cache(True)",
+          "1": "_disable_cache(True)",
+          "*": "_disable_cache(False)"
+        }
+      }
+    ],
+    "data_format_cali": [
+      "_data_format_cali('EISZeroOne')"
+    ],
+    "set_sample_rate": {
+      "type": "RIS",
+      "parameter": {
+        "va": "SAMPLE_RATE"
+      },
+      "data": [
+        "XE0;2B>va"
+      ]
+    },
+    "set_adc_gain_I": {
+      "type": "RIS",
+      "data": [
+        "XE1;X05;B>ADC_LEVEL_I_15"
+      ]
+    },
+    "set_adc_gain_Vin": {
+      "type": "RIS",
+      "data": [
+        "XE1;X06;B>ADC_LEVEL_V_IN_15"
+      ]
+    },
+    "set_ctrl_highZ": {
+      "type": "RIS",
+      "data": [
+        "XE1;X03;B>CTRL_HIGH_Z_15"
+      ]
+    },
+    "curve_eis": {
+      "type": "RIS",
+      "parameter": {
+        "fa": "FREQ[0]",
+        "fb": "FREQ[1]",
+        "dp": "DELAY",
+        "dc": "DC_BIAS",
+        "am": "AC_AMP",
+        "an": "AVERAGE_NUM",
+        "rt": "RTIA",
+        "pp": "PPD",
+        "sp": "SCALE"
+      },
+      "data": [
+        "1XD1;1X01;4B>fa;4B>fb;2B>dp"
+      ]
+    },
+    "curve_eis_para2": {
+      "type": "RIS",
+      "parameter": {
+        "fa": "FREQ[0]",
+        "fb": "FREQ[1]",
+        "dp": "DELAY",
+        "dc": "DC_BIAS",
+        "am": "AC_AMP",
+        "an": "AVERAGE_NUM",
+        "rt": "RTIA",
+        "pp": "PPD",
+        "sp": "SCALE"
+      },
+      "data": [
+        "1XD1;1X02;2B>dc;2B>am;B>an;B>rt;2B>pp;B>sp"
+      ]
+    },
+    "curve_cv3": {
+      "type": "RIS",
+      "parameter": {
+        "va": "VOLT_INITIAL",
+        "vb": "VOLT_MAX",
+        "vc": "VOLT_MIN",
+        "ve": "Scan_Rate",
+        "vf": "SAMPLE_RATE",
+        "cn": "CYCLE_NUMBER"
+      },
+      "data": [
+        "1XD2;1X01;2B>va;2B>vb;2B>vc;"
+      ]
+    },
+    "curve_cv3_para2": {
+      "type": "RIS",
+      "parameter": {
+        "va": "VOLT_INITIAL",
+        "vb": "VOLT_MAX",
+        "vc": "VOLT_MIN",
+        "ve": "Scan_Rate",
+        "vf": "SAMPLE_RATE",
+        "cn": "CYCLE_NUMBER"
+      },
+      "data": [
+        "1XD2;1X02;4B>ve;2B>vf;2B>cn"
+      ]
+    },
+    "curve_const_vscan": {
+      "type": "RIS",
+      "parameter": {
+        "va": "VOLT_VSCAN",
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE"
+      },
+      "data": [
+        "1XD3;",
+        "2B>va;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe"
+      ]
+    },
+    "curve_vt": {
+      "type": "RIS",
+      "parameter": {
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE",
+        "va": "MEASURE_VIN_RANGE"
+      },
+      "data": [
+        "X05;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe;",
+        "1B>va"
+      ]
+    },
+    "ble_instru_send": [
+      "ble_write",
+      "_cdr('20X>ADC_VALUE_I')"
+    ],
+    "ble_write": {
+      "type": "RIS",
+      "data": [
+        "XFF;",
+        "1B>BLE_WRITE[0];1B>BLE_WRITE[1];1B>BLE_WRITE[2];1B>BLE_WRITE[3];",
+        "1B>BLE_WRITE[4];1B>BLE_WRITE[5];1B>BLE_WRITE[6];1B>BLE_WRITE[7];",
+        "1B>BLE_WRITE[8];1B>BLE_WRITE[9];1B>BLE_WRITE[10];1B>BLE_WRITE[11];",
+        "1B>BLE_WRITE[12];1B>BLE_WRITE[13];1B>BLE_WRITE[14];1B>BLE_WRITE[15];",
+        "1B>BLE_WRITE[16];"
+      ]
+    },
+    "dev_version": [
+      "CIS_VERSION",
+      "_cdr('20X>ADC_VALUE_I')"
+    ],
+    "dev_battery": [
+      "CIS_VOLT",
+      "_cdr('20X>ADC_VALUE_I')"
+    ]
+  }
+}

python/res/devlib/json/Elite_EIS_MINI_1.0.devlib.json

@@ -0,0 +1,515 @@
+{
+  "name": "Elite_EIS_MINI_1.0",
+  "version": "1.2.30",
+  "match_rule": {
+    "local_name_pattern": "Elite.*",
+    "major_product_number": 0,
+    "minor_product_number": 4,
+    "major_version_number": 1,
+    "minor_version_number": 2
+  },
+  "constant": {
+    "FREQ_MAX": 4294967296,
+    "VOLT_MAX": 65536,
+    "BLE_WRITE_MAX": 255,
+    "TIME_MAX": 100000
+  },
+  "parameters": {
+    "TIME_DURATION": {
+      "description": "Run duration",
+      "record_meta": true,
+      "initial": 0,
+      "domain": [
+        "TIME_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CHANNEL": {
+      "derzteription": "record channels",
+      "record_meta": true,
+      "domain": "property",
+      "value": "[0, 1, 2]"
+    },
+    "CHANNEL_LABEL": {
+      "description": "channel label",
+      "record_meta": true,
+      "domain": "property",
+      "value": "['current', 'voltage', 'impedance']"
+    },
+    "SAMPLE_RATE": {
+      "description": "data sampling rate",
+      "record_meta": true,
+      "initial": 1000,
+      "domain": [
+        1001
+      ],
+      "value": {
+        "expression": "VALUE"
+      },
+      "on_change": "set_sample_rate"
+    },
+    "AMP_GAIN": {
+      "description": "amp gain",
+      "record_meta": true,
+      "domain": "constant",
+      "value": 1
+    },
+    "MODE": {
+      "description": "working mode",
+      "record_meta": true,
+      "value": [
+        "EIS CURVE",
+        "Cyclic Voltammetry",
+        "Chronoamperometric",
+        "V-T Graph",
+        "Dev Mode"
+      ]
+    },
+    "FREQ": {
+      "description": "DPV current recording period start",
+      "record_meta": true,
+      "initial": [
+        13333333,
+        7
+      ],
+      "domain": {
+        "list": [
+          "FREQ_MAX"
+        ]
+      },
+      "value": "VALUE"
+    },
+    "FREQ_START": {
+      "description": "Start of Freq Scan",
+      "record_meta": true,
+      "initial": 13422819,
+      "domain": [
+        "FREQ_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "FREQ_STOP": {
+      "description": "End of Freq Scan",
+      "record_meta": true,
+      "initial": 7,
+      "domain": [
+        "FREQ_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "DELAY": {
+      "description": "Wait x peroid before start taking measurements",
+      "record_meta": true,
+      "initial": 0,
+      "domain": [
+        101
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "AVERAGE_NUM": {
+      "description": "Number of sample used for average funciton",
+      "record_meta": true,
+      "initial": 8,
+      "value": [
+        2,
+        4,
+        8,
+        16
+      ]
+    },
+    "DC_BIAS": {
+      "description": "DC voltage bias in mV",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "AC_AMP": {
+      "description": "AC Amplitude in mV",
+      "record_meta": true,
+      "initial": 25,
+      "domain": [
+        2048
+      ]
+    },
+    "SCALE": {
+      "description": "Point spacing pattern",
+      "record_meta": true,
+      "initial": 0,
+      "value": [
+        0,
+        1
+      ]
+    },
+    "PPD": {
+      "description": "Point per decades",
+      "record_meta": true,
+      "initial": 10,
+      "domain": [
+        11
+      ]
+    },
+    "RTIA": {
+      "description": "High speed tia gain",
+      "record_meta": true,
+      "initial": 4,
+      "value": [
+        0,
+        1,
+        2,
+        3,
+        4
+      ]
+    },
+    "ADC_VALUE_I": {
+      "description": "ADC value current value",
+      "domain": "int"
+    },
+    "Scan_Rate": {
+      "description": "Voltage Scan Rate",
+      "record_meta": true,
+      "initial": 10000,
+      "domain": [
+        100001
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CTRL_HIGH_Z_15": {
+      "description": "ctrl highZ level",
+      "record_meta": true,
+      "initial": 1,
+      "value": [
+        "On",
+        "Off"
+      ],
+      "on_change": "set_ctrl_highZ"
+    },
+    "ADC_LEVEL_I_15": {
+      "description": "ADC level",
+      "record_meta": true,
+      "initial": 4,
+      "value": [
+        "0",
+        "1",
+        "2",
+        "3",
+        "auto"
+      ],
+      "on_change": "set_adc_gain_I"
+    },
+    "ADC_LEVEL_V_IN_15": {
+      "description": "ADC level",
+      "record_meta": true,
+      "initial": 3,
+      "value": [
+        "0",
+        "1",
+        "2",
+        "auto"
+      ],
+      "on_change": "set_adc_gain_Vin"
+    },
+    "VOLT_INITIAL": {
+      "description": "Initial Voltage of Scan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "VOLT_MAX": {
+      "description": "Max Voltage of Scan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "VOLT_MIN": {
+      "description": "Min Voltage of Scan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "CYCLE_NUMBER": {
+      "description": "CV cycle number",
+      "record_meta": true,
+      "initial": 1,
+      "domain": [
+        65536
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "VOLT_VSCAN": {
+      "description": "Voltage of VScan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
+    "MEASURE_VIN_RANGE": {
+      "description": "measure range of Vin",
+      "record_meta": true,
+      "initial": 0,
+      "value": [
+        "0",
+        "1",
+        "2",
+        "auto"
+      ]
+    },
+    "BLE_WRITE": {
+      "description": "send msg to elite",
+      "domain": {
+        "list": [
+          "BLE_WRITE_MAX"
+        ]
+      },
+      "initial": "[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0]",
+      "value": "VALUE"
+    },
+    "BLE_READ": {
+      "description": "receive msg from elite",
+      "domain": "int"
+    }
+  },
+  "instruction": {
+    "start": [
+      {
+        "expression": "MODE",
+        "when": {
+          "*": "start_data"
+        }
+      }
+    ],
+    "start_data": [
+      "data_format_cali",
+      "_notify(True)",
+      {
+        "expression": "MODE",
+        "when": {
+          "1": "set_adc_gain_I",
+          "2": "set_adc_gain_I",
+          "3": "set_adc_gain_I"
+        }
+      },
+      {
+        "expression": "MODE",
+        "when": {
+          "1": "set_adc_gain_Vin",
+          "2": "set_adc_gain_Vin",
+          "3": "set_adc_gain_Vin"
+        }
+      },
+      {
+        "expression": "MODE",
+        "when": {
+          "0": "curve_eis",
+          "1": "curve_cv3",
+          "2": "curve_const_vscan",
+          "3": "curve_vt"
+        }
+      },
+      {
+        "expression": "MODE",
+        "when": {
+          "0": "curve_eis_para2",
+          "1": "curve_cv3_para2"
+        }
+      },
+      "_sync(True)",
+      "VIS_STI"
+    ],
+    "data_format": [
+      "_data_format('EISZeroOne')",
+      {
+        "expression": "MODE",
+        "when": {
+          "0": "_disable_cache(True)",
+          "1": "_disable_cache(True)",
+          "*": "_disable_cache(False)"
+        }
+      }
+    ],
+    "data_format_cali": [
+      "_data_format_cali('EISZeroOne')"
+    ],
+    "set_sample_rate": {
+      "type": "RIS",
+      "parameter": {
+        "va": "SAMPLE_RATE"
+      },
+      "data": [
+        "XE0;2B>va"
+      ]
+    },
+    "set_adc_gain_I": {
+      "type": "RIS",
+      "data": [
+        "XE1;X05;B>ADC_LEVEL_I_15"
+      ]
+    },
+    "set_adc_gain_Vin": {
+      "type": "RIS",
+      "data": [
+        "XE1;X06;B>ADC_LEVEL_V_IN_15"
+      ]
+    },
+    "set_ctrl_highZ": {
+      "type": "RIS",
+      "data": [
+        "XE1;X03;B>CTRL_HIGH_Z_15"
+      ]
+    },
+    "curve_eis": {
+      "type": "RIS",
+      "parameter": {
+        "fa": "FREQ[0]",
+        "fb": "FREQ[1]",
+        "dp": "DELAY",
+        "dc": "DC_BIAS",
+        "am": "AC_AMP",
+        "an": "AVERAGE_NUM",
+        "rt": "RTIA",
+        "pp": "PPD",
+        "sp": "SCALE"
+      },
+      "data": [
+        "1XD1;1X01;4B>fa;4B>fb;2B>dp"
+      ]
+    },
+    "curve_eis_para2": {
+      "type": "RIS",
+      "parameter": {
+        "fa": "FREQ[0]",
+        "fb": "FREQ[1]",
+        "dp": "DELAY",
+        "dc": "DC_BIAS",
+        "am": "AC_AMP",
+        "an": "AVERAGE_NUM",
+        "rt": "RTIA",
+        "pp": "PPD",
+        "sp": "SCALE"
+      },
+      "data": [
+        "1XD1;1X02;2B>dc;2B>am;B>an;B>rt;2B>pp;B>sp"
+      ]
+    },
+    "curve_cv3": {
+      "type": "RIS",
+      "parameter": {
+        "va": "VOLT_INITIAL",
+        "vb": "VOLT_MAX",
+        "vc": "VOLT_MIN",
+        "ve": "Scan_Rate",
+        "vf": "SAMPLE_RATE",
+        "cn": "CYCLE_NUMBER"
+      },
+      "data": [
+        "1XD2;1X01;2B>va;2B>vb;2B>vc;"
+      ]
+    },
+    "curve_cv3_para2": {
+      "type": "RIS",
+      "parameter": {
+        "va": "VOLT_INITIAL",
+        "vb": "VOLT_MAX",
+        "vc": "VOLT_MIN",
+        "ve": "Scan_Rate",
+        "vf": "SAMPLE_RATE",
+        "cn": "CYCLE_NUMBER"
+      },
+      "data": [
+        "1XD2;1X02;4B>ve;2B>vf;2B>cn"
+      ]
+    },
+    "curve_const_vscan": {
+      "type": "RIS",
+      "parameter": {
+        "va": "VOLT_VSCAN",
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE"
+      },
+      "data": [
+        "1XD3;",
+        "2B>va;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe"
+      ]
+    },
+    "curve_vt": {
+      "type": "RIS",
+      "parameter": {
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE",
+        "va": "MEASURE_VIN_RANGE"
+      },
+      "data": [
+        "X05;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe;",
+        "1B>va"
+      ]
+    },
+    "ble_instru_send": [
+      "ble_write",
+      "_cdr('20X>ADC_VALUE_I')"
+    ],
+    "ble_write": {
+      "type": "RIS",
+      "data": [
+        "XFF;",
+        "1B>BLE_WRITE[0];1B>BLE_WRITE[1];1B>BLE_WRITE[2];1B>BLE_WRITE[3];",
+        "1B>BLE_WRITE[4];1B>BLE_WRITE[5];1B>BLE_WRITE[6];1B>BLE_WRITE[7];",
+        "1B>BLE_WRITE[8];1B>BLE_WRITE[9];1B>BLE_WRITE[10];1B>BLE_WRITE[11];",
+        "1B>BLE_WRITE[12];1B>BLE_WRITE[13];1B>BLE_WRITE[14];1B>BLE_WRITE[15];",
+        "1B>BLE_WRITE[16];"
+      ]
+    },
+    "dev_version": [
+      "CIS_VERSION",
+      "_cdr('20X>ADC_VALUE_I')"
+    ],
+    "dev_battery": [
+      "CIS_VOLT",
+      "_cdr('20X>ADC_VALUE_I')"
+    ]
+  }
+}

python/res/devlib/json/Elite_MEGAFLY_0.1.devlib.json

@@ -1,12 +1,12 @@
 {
-  "name": "EliteZM_pulsefly",
+  "name": "Elite_MEGAFLY_0.1",
   "version": "1.2.30",
   "match_rule": {
     "local_name_pattern": "Elite.*",
     "major_product_number": 0,
-    "minor_product_number": 2,
+    "minor_product_number": 6,
     "major_version_number": 1,
-    "minor_version_number": 7
+    "minor_version_number": 0
   },
   "constant": {
     "ADC_CHANNEL_NUMBER": [
@@ -1426,14 +1426,6 @@
         "X80;X03;B>CTRL_HIGH_Z_15"
       ]
     },
-    "VIS_CC_ZERO": [
-      "_data_format('I4V4Z4T4')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
     "pulse_fly": [
       "sti_mode",
       "gas1_mode",

python/res/devlib/json/Elite_TRIG_0.1.devlib.json

@@ -1,5 +1,5 @@
 {
-  "name": "Elite_TRI",
+  "name": "Elite_TRIG_0.1",
   "version": "1.2.30",
   "match_rule": {
     "local_name_pattern": "Trigger.*",

python/res/devlib/json/elite.devlib.json

@@ -1,221 +0,0 @@
-{
-  "name": "Elite",
-  "version": "0.1",
-  "match_rule": {
-    "local_name_pattern": "Elite.*",
-    "major_product_number": 0,
-    "minor_product_number": 1,
-    "major_version_number": 0,
-    "minor_version_number": 1
-  },
-  "constant": {
-    "REC_CHANNEL_COUNT": 16,
-    "STI_CHANNEL_COUNT": 15,
-    "ADC_SAMPLE_RATE_LIST": [
-      15,
-      25,
-      40,
-      50,
-      100,
-      250,
-      500,
-      1000,
-      2500,
-      4000,
-      5000
-    ],
-    "STI_FREQ_LIST": [
-      15,
-      25,
-      40,
-      50,
-      100,
-      250,
-      500,
-      1000,
-      2500,
-      4000,
-      5000
-    ]
-  },
-  "parameters": {
-    "MODE": {
-      "description": "working mode",
-      "value": [
-        "Recording Mode",
-        "Stimulation Mode",
-        "Artifact Mode"
-      ]
-    },
-    "CHANNEL": {
-      "description": "record channels",
-      "record_meta": true,
-      "domain": {
-        "set": [
-          "REC_CHANNEL_COUNT"
-        ]
-      }
-    },
-    "SAMPLE_RATE": {
-      "alias": "ADC_RATE",
-      "description": "sampling rate",
-      "record_meta": true,
-      "domain": [
-        "len(ADC_SAMPLE_RATE_LIST)"
-      ],
-      "value": "ADC_SAMPLE_RATE_LIST[VALUE]"
-    },
-    "AMP_GAIN": {
-      "description": "",
-      "record_meta": true,
-      "value": [
-        400,
-        1000,
-        2000
-      ]
-    },
-    "LOW_FREQ_BAND": {
-      "description": "",
-      "record_meta": true,
-      "domain": [
-        7
-      ]
-    },
-    "STI_MODE": {
-      "description": "stimulation mode",
-      "value": [
-        "Positive Pulse",
-        "Negative Pulse",
-        "Pos to Neg Pulse",
-        "Neg to Pos Pulse",
-        "Arbitrary Waveform"
-      ]
-    },
-    "STI_VOLT": {
-      "description": "stimulation voltage",
-      "domain": [
-        32
-      ],
-      "value": "2 + 3 * VALUE / 31"
-    },
-    "STI_FREQ": {
-      "description": "stimulation frequency",
-      "domain": [
-        "len(STI_FREQ_LIST)"
-      ],
-      "value": "STI_FREQ_LIST[VALUE]"
-    },
-    "STI_PMOS": {
-      "description": "stimulation PMOS channel",
-      "initial": 0,
-      "domain": [
-        "STI_CHANNEL_COUNT"
-      ],
-      "guard": "STI_PMOS != STI_NMOS"
-    },
-    "STI_NMOS": {
-      "description": "stimulation NMOS channel",
-      "initial": "STI_CHANNEL_COUNT - 1",
-      "domain": [
-        "STI_CHANNEL_COUNT"
-      ],
-      "guard": "STI_PMOS != STI_NMOS"
-    },
-    "CHOPPER": {
-      "description": "",
-      "domain": "bool"
-    },
-    "FAST_SETTLE": {
-      "description": "",
-      "domain": "bool"
-    }
-  },
-  "instruction": {
-    "start": [
-      {
-        "expression": "MODE",
-        "when": {
-          "0": "start_recording",
-          "1": "start_stimulation",
-          "2": "start_artifact"
-        }
-      },
-      "VIS_STI"
-    ],
-    "start_recording": [
-      {
-        "expression": "len(CHANNEL) > 0",
-        "raise": "no recording channel"
-      },
-      "data_format",
-      "_notify(True)",
-      "start_recording0",
-      "_sync(True)"
-    ],
-    "start_artifact": [
-      {
-        "expression": "len(CHANNEL) > 0",
-        "raise": "no recording channel"
-      },
-      "data_format",
-      "_notify(True)",
-      "start_artifact0",
-      "_sync(True)"
-    ],
-    "data_format": [
-      "_data_format('TDC4VAF2')"
-    ],
-    "start_recording0": {
-      "type": "RIS",
-      "foreach-parameter": {
-        "parameter": "CHANNEL",
-        "variable": [
-          "a",
-          "b",
-          "c",
-          "d"
-        ]
-      },
-      "data": [
-        "3b110#recording header;2b<AMP_GAIN;3b<LOW_FREQ_BAND",
-        "4b>SAMPLE_RATE;1ba?;1bb?;1bc?;1bd?",
-        "4b<a?:0;4b<b?:0",
-        "4b<c?:0;4b<d?:0"
-      ]
-    },
-    "start_artifact0": {
-      "type": "RIS",
-      "foreach-parameter": {
-        "parameter": "CHANNEL",
-        "variable": [
-          "a",
-          "b",
-          "c",
-          "d"
-        ]
-      },
-      "data": [
-        "3b100#artifact mode header;2b0;3b001",
-        "4b>SAMPLE_RATE;1ba?;1bb?;1bc?;1bd?",
-        "4b<a?:0;4b<b?:0",
-        "4b<c?:0;4b<d?:0"
-      ]
-    },
-    "start_stimulation": [
-      "start_stimulation0"
-    ],
-    "start_stimulation0": {
-      "type": "RIS",
-      "guard": {
-        "expression": "STI_PMOS != STI_NMOS",
-        "raise": "same N/PMos channel"
-      },
-      "data": [
-        "3b111#stimulation header;2b0;3bSTI_MODE",
-        "4b>STI_FREQ;1bCHOPPER;1bFAST_SETTLE;2b0",
-        "4b<STI_PMOS;4b<STI_NMOS",
-        "5b<STI_VOLT;3b0"
-      ]
-    }
-  }
-}

python/res/devlib/json/elite_legacy.devlib.json

@@ -1,220 +0,0 @@
-{
-  "name": "Elite_Legacy",
-  "version": "0.0.0",
-  "match_rule": {
-    "major_product_number": 0,
-    "minor_product_number": 0,
-    "major_version_number": 0,
-    "minor_version_number": 0
-  },
-  "constant": {
-    "REC_CHANNEL_COUNT": 16,
-    "STI_CHANNEL_COUNT": 15,
-    "ADC_SAMPLE_RATE_LIST": [
-      15,
-      25,
-      40,
-      50,
-      100,
-      250,
-      500,
-      1000,
-      2500,
-      4000,
-      5000
-    ],
-    "STI_FREQ_LIST": [
-      15,
-      25,
-      40,
-      50,
-      100,
-      250,
-      500,
-      1000,
-      2500,
-      4000,
-      5000
-    ]
-  },
-  "parameters": {
-    "MODE": {
-      "description": "working mode",
-      "value": [
-        "Recording Mode",
-        "Stimulation Mode",
-        "Artifact Mode"
-      ]
-    },
-    "CHANNEL": {
-      "description": "record channels",
-      "record_meta": true,
-      "domain": {
-        "set": [
-          "REC_CHANNEL_COUNT"
-        ]
-      }
-    },
-    "SAMPLE_RATE": {
-      "alias": "ADC_RATE",
-      "description": "sampling rate",
-      "record_meta": true,
-      "domain": [
-        "len(ADC_SAMPLE_RATE_LIST)"
-      ],
-      "value": "ADC_SAMPLE_RATE_LIST[VALUE]"
-    },
-    "AMP_GAIN": {
-      "description": "",
-      "record_meta": true,
-      "value": [
-        400,
-        1000,
-        2000
-      ]
-    },
-    "LOW_FREQ_BAND": {
-      "description": "",
-      "record_meta": true,
-      "domain": [
-        7
-      ]
-    },
-    "STI_MODE": {
-      "description": "stimulation mode",
-      "value": [
-        "Positive Pulse",
-        "Negative Pulse",
-        "Pos to Neg Pulse",
-        "Neg to Pos Pulse",
-        "Arbitrary Waveform"
-      ]
-    },
-    "STI_VOLT": {
-      "description": "stimulation voltage",
-      "domain": [
-        32
-      ],
-      "value": "2 + 3 * VALUE / 31"
-    },
-    "STI_FREQ": {
-      "description": "stimulation frequency",
-      "domain": [
-        "len(STI_FREQ_LIST)"
-      ],
-      "value": "STI_FREQ_LIST[VALUE]"
-    },
-    "STI_PMOS": {
-      "description": "stimulation PMOS channel",
-      "initial": 0,
-      "domain": [
-        "STI_CHANNEL_COUNT"
-      ],
-      "guard": "STI_PMOS != STI_NMOS"
-    },
-    "STI_NMOS": {
-      "description": "stimulation NMOS channel",
-      "initial": "STI_CHANNEL_COUNT - 1",
-      "domain": [
-        "STI_CHANNEL_COUNT"
-      ],
-      "guard": "STI_PMOS != STI_NMOS"
-    },
-    "CHOPPER": {
-      "description": "",
-      "domain": "bool"
-    },
-    "FAST_SETTLE": {
-      "description": "",
-      "domain": "bool"
-    }
-  },
-  "instruction": {
-    "start": [
-      {
-        "expression": "MODE",
-        "when": {
-          "0": "start_recording",
-          "1": "start_stimulation",
-          "2": "start_artifact"
-        }
-      },
-      "VIS_STI"
-    ],
-    "start_recording": [
-      {
-        "expression": "len(CHANNEL) > 0",
-        "raise": "no recording channel"
-      },
-      "data_format",
-      "_notify(True)",
-      "start_recording0",
-      "_sync(True)"
-    ],
-    "start_artifact": [
-      {
-        "expression": "len(CHANNEL) > 0",
-        "raise": "no recording channel"
-      },
-      "data_format",
-      "_notify(True)",
-      "start_artifact0",
-      "_sync(True)"
-    ],
-    "data_format": [
-      "_data_format('TC4VAF2')"
-    ],
-    "start_recording0": {
-      "type": "RIS",
-      "foreach-parameter": {
-        "parameter": "CHANNEL",
-        "variable": [
-          "a",
-          "b",
-          "c",
-          "d"
-        ]
-      },
-      "data": [
-        "3b110#recording header;2b<AMP_GAIN;3b<LOW_FREQ_BAND",
-        "4b>SAMPLE_RATE;1ba?;1bb?;1bc?;1bd?",
-        "4b<a?:0;4b<b?:0",
-        "4b<c?:0;4b<d?:0"
-      ]
-    },
-    "start_artifact0": {
-      "type": "RIS",
-      "foreach-parameter": {
-        "parameter": "CHANNEL",
-        "variable": [
-          "a",
-          "b",
-          "c",
-          "d"
-        ]
-      },
-      "data": [
-        "3b100#artifact mode header;2b0;3b001",
-        "4b>SAMPLE_RATE;1ba?;1bb?;1bc?;1bd?",
-        "4b<a?:0;4b<b?:0",
-        "4b<c?:0;4b<d?:0"
-      ]
-    },
-    "start_stimulation": [
-      "start_stimulation0"
-    ],
-    "start_stimulation0": {
-      "type": "RIS",
-      "guard": {
-        "expression": "STI_PMOS != STI_NMOS",
-        "raise": "same N/PMos channel"
-      },
-      "data": [
-        "3b111#stimulation header;2b0;3bSTI_MODE",
-        "4b>STI_FREQ;1bCHOPPER;1bFAST_SETTLE;2b0",
-        "4b<STI_PMOS;4b<STI_NMOS",
-        "5b<STI_VOLT;3b0"
-      ]
-    }
-  }
-}

python/res/devlib/json/elite_zm.devlib.json

@@ -1,343 +0,0 @@
-{
-  "name": "EliteZM",
-  "version": "1.2.30",
-  "match_rule": {
-    "local_name_pattern": "Elite-ZM.+",
-    "major_product_number": 0,
-    "minor_product_number": 2,
-    "major_version_number": 1,
-    "minor_version_number": 2
-  },
-  "constant": {
-    "ADC_CHANNEL_NUMBER": [
-      12,
-      13,
-      14,
-      15
-    ],
-    "VOLT_MAX": 65536,
-    "STEP_MAX": 100,
-    "Const_Current_Range": 1500001
-  },
-  "parameters": {
-    "CHANNEL": {
-      "description": "record channels",
-      "record_meta": true,
-      "domain": "property",
-      "value": "[0, 1, 2]"
-    },
-    "CHANNEL_LABEL": {
-      "description": "channel label",
-      "record_meta": true,
-      "domain": "property",
-      "value": "['current', 'voltage', 'impedance']"
-    },
-    "SAMPLE_RATE": {
-      "description": "data sampling rate",
-      "record_meta": true,
-      "value": [
-        100,
-        10,
-        5,
-        1,
-        0.1,
-        0.01
-      ],
-      "on_change": "set_sample_rate"
-    },
-    "AMP_GAIN": {
-      "description": "amp gain",
-      "record_meta": true,
-      "domain": "constant",
-      "value": 1
-    },
-    "MODE": {
-      "description": "working mode",
-      "record_meta": true,
-      "value": [
-        "I-V Curve",
-        "Cyclic Voltammetry",
-        "Function Generator",
-        "R-T Curve",
-        "V-T Curve",
-        "I-T Curve",
-        "ADC test",
-        "Constant Current"
-      ]
-    },
-    "VOLT_ORIGIN": {
-      "description": "Origin Voltage of Scan",
-      "record_meta": true,
-      "initial": 25000,
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": {
-        "expression": "(VALUE) * 0x0001"
-      }
-    },
-    "VOLT_FINAL": {
-      "description": "The last Voltage of Scan",
-      "record_meta": true,
-      "initial": 25000,
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": {
-        "expression": " (VALUE) * 0x0001"
-      }
-    },
-    "VOLT_STEP": {
-      "description": "Voltage Step",
-      "record_meta": true,
-      "initial": 0,
-      "domain": [
-        "STEP_MAX"
-      ],
-      "value": {
-        "expression": "(VALUE + 1) * 0x0001"
-      }
-    },
-    "STEP_TIME": {
-      "description": "How much time between two step",
-      "record_meta": true,
-      "initial": 1,
-      "value": [
-        0.5,
-        1.0,
-        2.0
-      ]
-    },
-    "CYCLE_NUMBER": {
-      "description": "CV cycle number",
-      "record_meta": true,
-      "initial": 0,
-      "domain": [
-        200
-      ],
-      "value": {
-        "expression": "VALUE + 1"
-      }
-    },
-    "DAC_VOLT": {
-      "description": "DAC output Voltage",
-      "record_meta": true,
-      "initial": 25000,
-      "domain": [
-        65536
-      ]
-    },
-    "ADC_CHANNEL": {
-      "description": "read ADC data",
-      "record_meta": true,
-      "value": [
-        "ANA0",
-        "ANA1",
-        "ANA2",
-        "ANA3"
-      ]
-    },
-    "ADC_LEVEL": {
-      "description": "ADC level",
-      "record_meta": true,
-      "initial": 3,
-      "value": [
-        "200k",
-        "10k",
-        "200R",
-        "auto"
-      ],
-      "on_change": "set_adc_gain"
-    },
-    "Resister_LEVEL": {
-      "description": "Resister_LEVEL",
-      "record_meta": true,
-      "initial": 3,
-      "value": [
-        "Small",
-        "Middle",
-        "Large",
-        "Auto"
-      ],
-      "on_change": "set_Resister_level"
-    },
-    "ADC_VALUE_V": {
-      "description": "ADC value voltage value",
-      "domain": "int"
-    },
-    "ADC_VALUE_I": {
-      "description": "ADC value current value",
-      "domain": "int"
-    },
-    "Const_Current_unit": {
-      "description": "Constant Current unit Setting",
-      "initial": 1,
-      "value": [
-        "uA",
-        "mA"
-      ]
-    },
-    "Const_Current_value": {
-      "description": "Constant Current value Setting",
-      "initial": 0,
-      "domain": [
-        "Const_Current_Range"
-      ],
-      "value": {
-        "expression": "(VALUE) * 0x00000001"
-      }
-    },
-    "Charge": {
-      "description": "Charge battery or not",
-      "initial": 0,
-      "value": [
-        "Charge",
-        "Discharge"
-      ]
-    },
-    "Const_Current_VStop": {
-      "description": "Constant Current Stopping Voltage",
-      "initial": 0,
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": {
-        "expression": "(VALUE) * 0x0001"
-      }
-    }
-  },
-  "instruction": {
-    "start": [
-      {
-        "expression": "MODE",
-        "when": {
-          "2": "start_fun_gen",
-          "6": "adc_test",
-          "*": "start_data"
-        }
-      }
-    ],
-    "start_fun_gen": [
-      "data_format",
-      "func_gen",
-      "VIS_STI"
-    ],
-    "adc_test": [
-      "adc_test0",
-      "_cdr('1X;4X>ADC_VALUE_I;4X>ADC_VALUE_V')"
-    ],
-    "start_data": [
-      "data_format",
-      "_notify(True)",
-      "set_sample_rate",
-      {
-        "expression": "MODE",
-        "when": {
-          "0": "curve_iv",
-          "1": "curve_cv",
-          "3": "curve_zt",
-          "4": "curve_vt",
-          "5": "curve_it",
-          "7": "const_current"
-        }
-      },
-      "_sync(True)",
-      "VIS_STI"
-    ],
-    "data_format": [
-      "_data_format('I4V4Z4T4')",
-      {
-        "expression": "MODE",
-        "when": {
-          "0": "_disable_cache(True)",
-          "1": "_disable_cache(True)",
-          "*": "_disable_cache(False)"
-        }
-      }
-    ],
-    "curve_iv": {
-      "type": "RIS",
-      "parameter": {
-        "va": "(VOLT_ORIGIN) * 0x0001",
-        "vb": "(VOLT_FINAL) * 0x0001",
-        "dv": "(VOLT_STEP + 1) * 0x0001",
-        "dt": "STEP_TIME * 0x12"
-      },
-      "data": [
-        "1X10;2B>va;2B>vb;2B>dv;B>dt"
-      ]
-    },
-    "curve_cv": {
-      "type": "RIS",
-      "parameter": {
-        "va": "(VOLT_ORIGIN) * 0x0001",
-        "vb": "(VOLT_FINAL) * 0x0001",
-        "dv": "(VOLT_STEP + 1) * 0x0001",
-        "dt": "STEP_TIME * 0x12",
-        "cn": "CYCLE_NUMBER+1"
-      },
-      "data": [
-        "1X20;2B>va;2B>vb;2B>dv;B>dt;B>cn"
-      ]
-    },
-    "func_gen": {
-      "type": "RIS",
-      "parameter": {
-        "v": "(DAC_VOLT) * 0x0001"
-      },
-      "data": [
-        "X30;2B>v"
-      ]
-    },
-    "curve_zt": {
-      "type": "RIS",
-      "data": [
-        "X40"
-      ]
-    },
-    "curve_vt": {
-      "type": "RIS",
-      "data": [
-        "X50"
-      ]
-    },
-    "curve_it": {
-      "type": "RIS",
-      "data": [
-        "X60"
-      ]
-    },
-    "adc_test0": {
-      "type": "RIS",
-      "data": [
-        "X90;B>ADC_LEVEL;B>ADC_CHANNEL"
-      ]
-    },
-    "set_sample_rate": {
-      "type": "RIS",
-      "data": [
-        "X70;B>SAMPLE_RATE"
-      ]
-    },
-    "set_adc_gain": {
-      "type": "RIS",
-      "data": [
-        "X80;B>ADC_LEVEL"
-      ]
-    },
-    "set_Resister_level": {
-      "type": "RIS",
-      "data": [
-        "XE0;B>Resister_LEVEL"
-      ]
-    },
-    "const_current": {
-      "type": "RIS",
-      "data": [
-        "XD0;B>Charge;2X>Const_Current_VStop;4X>Const_Current_value"
-      ]
-    }
-  }
-}
-
-

python/res/devlib/json/elite_zm_LargeCurrent.devlib.json

@@ -1,320 +0,0 @@
-{
-  "name": "EliteZML",
-  "version": "1.2.30",
-  "match_rule": {
-    "local_name_pattern": "Elite-ZM.+",
-    "major_product_number": 0,
-    "minor_product_number": 2,
-    "major_version_number": 1,
-    "minor_version_number": 4
-  },
-  "constant": {
-    "ADC_CHANNEL_NUMBER": [
-      12,
-      13,
-      14,
-      15
-    ],
-    "VOLT_MAX": 65536,
-    "STEP_MAX": 100,
-    "Const_Current_Range": 3000001
-  },
-  "parameters": {
-    "CHANNEL": {
-      "description": "record channels",
-      "record_meta": true,
-      "domain": "property",
-      "value": "[0, 1, 2]"
-    },
-    "CHANNEL_LABEL": {
-      "description": "channel label",
-      "record_meta": true,
-      "domain": "property",
-      "value": "['current', 'voltage', 'impedance']"
-    },
-    "SAMPLE_RATE": {
-      "description": "data sampling rate",
-      "record_meta": true,
-      "value": [
-        100,
-        10,
-        5,
-        1,
-        0.1,
-        0.01
-      ],
-      "on_change": "set_sample_rate"
-    },
-    "AMP_GAIN": {
-      "description": "amp gain",
-      "record_meta": true,
-      "domain": "constant",
-      "value": 1
-    },
-    "MODE": {
-      "description": "working mode",
-      "record_meta": true,
-      "value": [
-        "I-V Curve",
-        "Cyclic Voltammetry",
-        "Function Generator",
-        "R-T Curve",
-        "V-T Curve",
-        "I-T Curve",
-        "ADC test",
-        "Constant Current"
-      ]
-    },
-    "VOLT_ORIGIN": {
-      "description": "Origin Voltage of Scan",
-      "record_meta": true,
-      "initial": 25000,
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": {
-        "expression": "(VALUE + 1) * 0x0001"
-      }
-    },
-    "VOLT_FINAL": {
-      "description": "The last Voltage of Scan",
-      "record_meta": true,
-      "initial": 25000,
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": {
-        "expression": " (VALUE + 1) * 0x0001"
-      }
-    },
-    "VOLT_STEP": {
-      "description": "Voltage Step",
-      "record_meta": true,
-      "initial": 0,
-      "domain": [
-        "STEP_MAX"
-      ],
-      "value": {
-        "expression": "(VALUE + 1) * 0x0001"
-      }
-    },
-    "STEP_TIME": {
-      "description": "How much time between two step",
-      "record_meta": true,
-      "initial": 1,
-      "value": [
-        0.5,
-        1.0,
-        2.0
-      ]
-    },
-    "CYCLE_NUMBER": {
-      "description": "CV cycle number",
-      "record_meta": true,
-      "domain": [
-        200
-      ],
-      "value": {
-        "expression": "VALUE + 1"
-      }
-    },
-    "DAC_VOLT": {
-      "description": "DAC output Voltage",
-      "record_meta": true,
-      "domain": [
-        65536
-      ]
-    },
-    "ADC_CHANNEL": {
-      "description": "read ADC data",
-      "record_meta": true,
-      "value": [
-        "ANA0",
-        "ANA1",
-        "ANA2",
-        "ANA3"
-      ]
-    },
-    "ADC_LEVEL": {
-      "description": "ADC level",
-      "record_meta": true,
-      "value": [
-        "200k",
-        "10k",
-        "200R",
-        "auto"
-      ],
-      "on_change": "set_adc_gain"
-    },
-    "Resister_LEVEL": {
-      "description": "Resister_LEVEL",
-      "record_meta": true,
-      "value": [
-        "Small",
-        "Middle",
-        "Large",
-        "Auto"
-      ],
-      "on_change": "set_Resister_level"
-    },
-    "ADC_VALUE_V": {
-      "description": "ADC value voltage value",
-      "domain": "int"
-    },
-    "ADC_VALUE_I": {
-      "description": "ADC value current value",
-      "domain": "int"
-    },
-    "Const_Current_unit": {
-      "description": "Constant Current unit Setting",
-      "value": [
-        "uA",
-        "mA"
-      ]
-    },
-    "Const_Current_value": {
-      "description": "Constant Current value Setting",
-      "initial": 1500000,
-      "domain": [
-        "Const_Current_Range"
-      ],
-      "value": {
-        "expression": "(VALUE) * 0x00000001"
-      }
-    }
-  },
-  "instruction": {
-    "start": [
-      {
-        "expression": "MODE",
-        "when": {
-          "2": "start_fun_gen",
-          "6": "adc_test",
-          "*": "start_data"
-        }
-      }
-    ],
-    "start_fun_gen": [
-      "data_format",
-      "func_gen",
-      "VIS_STI"
-    ],
-    "adc_test": [
-      "adc_test0",
-      "_cdr('1X;4X>ADC_VALUE_I;4X>ADC_VALUE_V')"
-    ],
-    "start_data": [
-      "data_format",
-      "_notify(True)",
-      "set_sample_rate",
-      {
-        "expression": "MODE",
-        "when": {
-          "0": "curve_iv",
-          "1": "curve_cv",
-          "3": "curve_zt",
-          "4": "curve_vt",
-          "5": "curve_it",
-          "7": "const_current"
-        }
-      },
-      "_sync(True)",
-      "VIS_STI"
-    ],
-    "data_format": [
-      "_data_format('I4V4Z4T4')",
-      {
-        "expression": "MODE",
-        "when": {
-          "0": "_disable_cache(True)",
-          "1": "_disable_cache(True)",
-          "*": "_disable_cache(False)"
-        }
-      }
-    ],
-    "curve_iv": {
-      "type": "RIS",
-      "parameter": {
-        "va": "(VOLT_ORIGIN + 1) * 0x0001",
-        "vb": "(VOLT_FINAL + 1) * 0x0001",
-        "dv": "(VOLT_STEP + 1) * 0x0001",
-        "dt": "STEP_TIME * 0x12"
-      },
-      "data": [
-        "1X10;2B>va;2B>vb;2B>dv;B>dt"
-      ]
-    },
-    "curve_cv": {
-      "type": "RIS",
-      "parameter": {
-        "va": "(VOLT_ORIGIN + 1) * 0x0001",
-        "vb": "(VOLT_FINAL + 1) * 0x0001",
-        "dv": "(VOLT_STEP + 1) * 0x0001",
-        "dt": "STEP_TIME * 0x12",
-        "cn": "CYCLE_NUMBER+1"
-      },
-      "data": [
-        "1X20;2B>va;2B>vb;2B>dv;B>dt;B>CYCLE_NUMBER"
-      ]
-    },
-    "func_gen": {
-      "type": "RIS",
-      "parameter": {
-        "v": "(DAC_VOLT) * 0x0001"
-      },
-      "data": [
-        "X30;2B>v"
-      ]
-    },
-    "curve_zt": {
-      "type": "RIS",
-      "data": [
-        "X40"
-      ]
-    },
-    "curve_vt": {
-      "type": "RIS",
-      "data": [
-        "X50"
-      ]
-    },
-    "curve_it": {
-      "type": "RIS",
-      "data": [
-        "X60"
-      ]
-    },
-    "adc_test0": {
-      "type": "RIS",
-      "data": [
-        "X90;B>ADC_LEVEL;B>ADC_CHANNEL"
-      ]
-    },
-    "set_sample_rate": {
-      "type": "RIS",
-      "data": [
-        "X70;B>SAMPLE_RATE"
-      ]
-    },
-    "set_adc_gain": {
-      "type": "RIS",
-      "data": [
-        "X80;B>ADC_LEVEL"
-      ]
-    },
-    "set_Resister_level": {
-      "type": "RIS",
-      "data": [
-        "XE0;B>Resister_LEVEL"
-      ]
-    },
-    "const_current": {
-      "type": "RIS",
-      "data": [
-        "XD0;4X>Const_Current_value"
-      ]
-    }
-  }
-}
-
-

python/res/devlib/json/elite_zm_SmallCurrent.devlib.json

@@ -1,320 +0,0 @@
-{
-  "name": "EliteZMS",
-  "version": "1.2.30",
-  "match_rule": {
-    "local_name_pattern": "Elite-ZM.+",
-    "major_product_number": 0,
-    "minor_product_number": 2,
-    "major_version_number": 1,
-    "minor_version_number": 3
-  },
-  "constant": {
-    "ADC_CHANNEL_NUMBER": [
-      12,
-      13,
-      14,
-      15
-    ],
-    "VOLT_MAX": 65536,
-    "STEP_MAX": 100,
-    "Const_Current_Range": 3000001
-  },
-  "parameters": {
-    "CHANNEL": {
-      "description": "record channels",
-      "record_meta": true,
-      "domain": "property",
-      "value": "[0, 1, 2]"
-    },
-    "CHANNEL_LABEL": {
-      "description": "channel label",
-      "record_meta": true,
-      "domain": "property",
-      "value": "['current', 'voltage', 'impedance']"
-    },
-    "SAMPLE_RATE": {
-      "description": "data sampling rate",
-      "record_meta": true,
-      "value": [
-        100,
-        10,
-        5,
-        1,
-        0.1,
-        0.01
-      ],
-      "on_change": "set_sample_rate"
-    },
-    "AMP_GAIN": {
-      "description": "amp gain",
-      "record_meta": true,
-      "domain": "constant",
-      "value": 1
-    },
-    "MODE": {
-      "description": "working mode",
-      "record_meta": true,
-      "value": [
-        "I-V Curve",
-        "Cyclic Voltammetry",
-        "Function Generator",
-        "R-T Curve",
-        "V-T Curve",
-        "I-T Curve",
-        "ADC test",
-        "Constant Current"
-      ]
-    },
-    "VOLT_ORIGIN": {
-      "description": "Origin Voltage of Scan",
-      "record_meta": true,
-      "initial": 25000,
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": {
-        "expression": "(VALUE + 1) * 0x0001"
-      }
-    },
-    "VOLT_FINAL": {
-      "description": "The last Voltage of Scan",
-      "record_meta": true,
-      "initial": 25000,
-      "domain": [
-        "VOLT_MAX"
-      ],
-      "value": {
-        "expression": " (VALUE + 1) * 0x0001"
-      }
-    },
-    "VOLT_STEP": {
-      "description": "Voltage Step",
-      "record_meta": true,
-      "initial": 0,
-      "domain": [
-        "STEP_MAX"
-      ],
-      "value": {
-        "expression": "(VALUE + 1) * 0x0001"
-      }
-    },
-    "STEP_TIME": {
-      "description": "How much time between two step",
-      "record_meta": true,
-      "initial": 1,
-      "value": [
-        0.5,
-        1.0,
-        2.0
-      ]
-    },
-    "CYCLE_NUMBER": {
-      "description": "CV cycle number",
-      "record_meta": true,
-      "domain": [
-        200
-      ],
-      "value": {
-        "expression": "VALUE + 1"
-      }
-    },
-    "DAC_VOLT": {
-      "description": "DAC output Voltage",
-      "record_meta": true,
-      "domain": [
-        65536
-      ]
-    },
-    "ADC_CHANNEL": {
-      "description": "read ADC data",
-      "record_meta": true,
-      "value": [
-        "ANA0",
-        "ANA1",
-        "ANA2",
-        "ANA3"
-      ]
-    },
-    "ADC_LEVEL": {
-      "description": "ADC level",
-      "record_meta": true,
-      "value": [
-        "200k",
-        "10k",
-        "200R",
-        "auto"
-      ],
-      "on_change": "set_adc_gain"
-    },
-    "Resister_LEVEL": {
-      "description": "Resister_LEVEL",
-      "record_meta": true,
-      "value": [
-        "Small",
-        "Middle",
-        "Large",
-        "Auto"
-      ],
-      "on_change": "set_Resister_level"
-    },
-    "ADC_VALUE_V": {
-      "description": "ADC value voltage value",
-      "domain": "int"
-    },
-    "ADC_VALUE_I": {
-      "description": "ADC value current value",
-      "domain": "int"
-    },
-    "Const_Current_unit": {
-      "description": "Constant Current unit Setting",
-      "value": [
-        "uA",
-        "mA"
-      ]
-    },
-    "Const_Current_value": {
-      "description": "Constant Current value Setting",
-      "initial": 1500000,
-      "domain": [
-        "Const_Current_Range"
-      ],
-      "value": {
-        "expression": "(VALUE) * 0x00000001"
-      }
-    }
-  },
-  "instruction": {
-    "start": [
-      {
-        "expression": "MODE",
-        "when": {
-          "2": "start_fun_gen",
-          "6": "adc_test",
-          "*": "start_data"
-        }
-      }
-    ],
-    "start_fun_gen": [
-      "data_format",
-      "func_gen",
-      "VIS_STI"
-    ],
-    "adc_test": [
-      "adc_test0",
-      "_cdr('1X;4X>ADC_VALUE_I;4X>ADC_VALUE_V')"
-    ],
-    "start_data": [
-      "data_format",
-      "_notify(True)",
-      "set_sample_rate",
-      {
-        "expression": "MODE",
-        "when": {
-          "0": "curve_iv",
-          "1": "curve_cv",
-          "3": "curve_zt",
-          "4": "curve_vt",
-          "5": "curve_it",
-          "7": "const_current"
-        }
-      },
-      "_sync(True)",
-      "VIS_STI"
-    ],
-    "data_format": [
-      "_data_format('I4V4Z4T4')",
-      {
-        "expression": "MODE",
-        "when": {
-          "0": "_disable_cache(True)",
-          "1": "_disable_cache(True)",
-          "*": "_disable_cache(False)"
-        }
-      }
-    ],
-    "curve_iv": {
-      "type": "RIS",
-      "parameter": {
-        "va": "(VOLT_ORIGIN + 1) * 0x0001",
-        "vb": "(VOLT_FINAL + 1) * 0x0001",
-        "dv": "(VOLT_STEP + 1) * 0x0001",
-        "dt": "STEP_TIME * 0x12"
-      },
-      "data": [
-        "1X10;2B>va;2B>vb;2B>dv;B>dt"
-      ]
-    },
-    "curve_cv": {
-      "type": "RIS",
-      "parameter": {
-        "va": "(VOLT_ORIGIN + 1) * 0x0001",
-        "vb": "(VOLT_FINAL + 1) * 0x0001",
-        "dv": "(VOLT_STEP + 1) * 0x0001",
-        "dt": "STEP_TIME * 0x12",
-        "cn": "CYCLE_NUMBER+1"
-      },
-      "data": [
-        "1X20;2B>va;2B>vb;2B>dv;B>dt;B>CYCLE_NUMBER"
-      ]
-    },
-    "func_gen": {
-      "type": "RIS",
-      "parameter": {
-        "v": "(DAC_VOLT) * 0x0001"
-      },
-      "data": [
-        "X30;2B>v"
-      ]
-    },
-    "curve_zt": {
-      "type": "RIS",
-      "data": [
-        "X40"
-      ]
-    },
-    "curve_vt": {
-      "type": "RIS",
-      "data": [
-        "X50"
-      ]
-    },
-    "curve_it": {
-      "type": "RIS",
-      "data": [
-        "X60"
-      ]
-    },
-    "adc_test0": {
-      "type": "RIS",
-      "data": [
-        "X90;B>ADC_LEVEL;B>ADC_CHANNEL"
-      ]
-    },
-    "set_sample_rate": {
-      "type": "RIS",
-      "data": [
-        "X70;B>SAMPLE_RATE"
-      ]
-    },
-    "set_adc_gain": {
-      "type": "RIS",
-      "data": [
-        "X80;B>ADC_LEVEL"
-      ]
-    },
-    "set_Resister_level": {
-      "type": "RIS",
-      "data": [
-        "XE0;B>Resister_LEVEL"
-      ]
-    },
-    "const_current": {
-      "type": "RIS",
-      "data": [
-        "XD0;4X>Const_Current_value"
-      ]
-    }
-  }
-}
-
-