[update] socket listen 3 -> 20

python/biopro/controller.py

@@ -1585,6 +1585,15 @@ class ControlAPI(metaclass=Router):
     
     def stop_project(self, project) -> bool:
         raise NotImplementedError()
+    
+    def set_project(self, project, content) -> bool:
+        raise NotImplementedError()
+    
+    def set_project_cycle(self, project, index, content) -> bool:
+        raise NotImplementedError()
+    
+    def show_device_data(self, device) -> bool:
+        raise NotImplementedError()
 
 # noinspection PyAbstractClass
 class ControlClient(SocketClient, ControlAPI, metaclass=SocketClientMacro(ControlAPI)):

python/biopro/data.py

@@ -130,6 +130,14 @@ class DataAPI(metaclass=abc.ABCMeta):
     def hardware_test(self) -> JSON_OBJECT:
         """"""
         pass
+    
+    @abc.abstractmethod
+    def show_data(self, device: Union[int, Device]):
+        """show device data
+
+        :param device: device ID
+        """
+        pass
 
 
 # noinspection PyAbstractClass
@@ -191,6 +199,9 @@ class DataClient(SocketClient, DataAPI, metaclass=SocketClientMacro(DataAPI)):
 
     def stop_sync(self, *device: Union[int, Device]):
         self.send_command('stop_sync', *self._to_device_id(*device))
+    
+    def show_data(self, device: int):
+        self.send_command('show_data', device)
 
     @staticmethod
     def _to_device_id(*device: Union[int, Device]) -> Tuple[int, ...]:

python/biopro/devlib/data.py

@@ -853,7 +853,7 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
 
     __slots__ = ('_message', '_cycle_number', '_start_return_data', '_time_stamp',
                  '_total_time_stamp', '_mode', '_cycle_start_time',
-                 '_mode_stop')
+                 '_mode_stop', '_show_data')
 
     def __init__(self):
         super().__init__()
@@ -868,6 +868,8 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
         self._mode = 0
         self._cycle_start_time = []
 
+        self._show_data = False
+
     @property
     def name(self) -> str:
         return self.NAME
@@ -885,17 +887,17 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
         mem_cnt = data[1]
         time_stamp: float = struct.unpack('<I', data[4:8])[0]  # unit: ms 0x18030000
         current = struct.unpack('<i', data[8:12])[0]  # unit: nA
-        ch2 = struct.unpack('<i', data[12:16])[0]  # unit: uV
+        voltage = struct.unpack('<i', data[12:16])[0]  # unit: uV
         impedance = struct.unpack('<i', data[16:20])[0]  # unit: mOm
-        if self._mode == 16:
-            voltage = impedance - ch2
-        else:
-            voltage = ch2
 
         cycle_number = struct.unpack('<H', data[20:22])[0]
         finish_mode_falg = data[22]
         battery = struct.unpack('<i', data[23:27])[0]
         elite_notify_times = data[27]
+        notify_one = struct.unpack('<i', data[28:32])[0]
+        notify_two = struct.unpack('<i', data[32:36])[0]
+        notify_three = struct.unpack('<i', data[36:40])[0]
+        # self._show_data = True
 
         mem_wrong_information = struct.unpack('<i', data[43:47])[0] # mem_wrong_information = green retry, green wrong, red retry, red wrong
         ram_num = data[47]
@@ -919,9 +921,11 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
                 print("error timeStamp full data:", list(data), datetime.now(), '\n')
                 return None
             else:
-                # print('|', time_stamp, '|', delta, '|', int(time_stamp * 1000 / 2),
-                #       '|', current, '|', voltage, '|', impedance,
-                #       '|', cycle_number, '|', finishMode, '@', str(self.device))
+                if self._show_data:
+                    print('|', time_stamp, '|', delta, '|', int(time_stamp * 1000 / 2),
+                        '|', current, '|', voltage, '|', impedance, '|', cycle_number, 
+                        '|', notify_one, '|', notify_two, '|', notify_three, 
+                        '|', finishMode, '@', str(self.device))
 
                 # print('|', '{:10}'.format(time_stamp),
                 #       '|', '{:4}'.format(delta),
@@ -950,6 +954,9 @@ class I4V4Z4T4DataDecoder(RecDataDecoder):
         ret.append_data(1, voltage)
         ret.append_data(2, impedance)
         ret.append_data(3, cycle_number)
+        ret.append_data(4, notify_one)
+        ret.append_data(5, notify_two)
+        ret.append_data(6, notify_three)
         # ret.append_data(4, battery)
         # ret.append_data(5, elite_notify_times)
         # ret.append_data(6, mem_cnt)
@@ -1339,7 +1346,7 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                  '_total_time_stamp', '_mode', '_cycle_start_time',
                  '_mode_stop', '_last_time_stamp', '_last_delta', '_cali_coeff',
                  'cali_coeff', '_ac_amp', '_mode', '_freq_start', '_freq_stop',
-                 '_freq_direction', '_last_phase', '_first_phase_flag')
+                 '_freq_direction', '_last_phase', '_first_phase_flag', '_show_data')
 
     def __init__(self, cali_coeff: bytes = None):
         super().__init__()
@@ -1363,6 +1370,8 @@ class EISZeroOneDataDecoder(RecDataDecoder):
         self._cali_coeff: Optional[bytes] = None
         self.cali_coeff: Optional[List[Tuple[int, int]]] = None
 
+        self._show_data = False
+
         if cali_coeff is not None:
             self._cali_coeff = cali_coeff
             self.cali_coeff = self._decode_cali_coeff(cali_coeff)
@@ -1547,34 +1556,34 @@ class EISZeroOneDataDecoder(RecDataDecoder):
                     imag_after_cal = impedance * math.sin(round(phase) * math.pi / 180)
                     real_after_cal = impedance * math.cos(round(phase) * math.pi / 180)
 
-
-                if (self._mode == 0):
-                    # print('|', '{:10}'.format(time_stamp),
-                    #     '|', '{:5}'.format(delta),
-                    #     '|', '{:6}'.format(ch1),
-                    #     '|', '{:6}'.format(ch2),
-                    #     '|', '{:8}'.format(ch3 / 100),
-                    #     '|', '{:6}'.format(round(voltage_mag)),
-                    #     '|', '{:5}'.format(int(imag_after_cal)),
-                    #     '|', '{:5}'.format(int(real_after_cal)),
-                    #     '|', '{:5}'.format(round(impedance)),
-                    #     '|', '{:5}'.format(round(phase, 1)),
-                    #     '|', '{:5}'.format(round(current, 3)),
-                    #     '|', '{:1}'.format(gain),
-                    #     '|', '{:1}'.format(finishMode),
-                    #     '@', str(self.device), '|')
-                    pass
-                else:
-                    # print('|', '{:10}'.format(time_stamp),
-                    #     '|', '{:5}'.format(delta),
-                    #     '|', '{:5}'.format(ch1),
-                    #     '|', '{:5}'.format(ch2),
-                    #     '|', '{:5}'.format(ch3),
-                    #     '|', '{:5}'.format(cycle_number),
-                    #     '|', '{:1}'.format(gain),
-                    #     '|', '{:1}'.format(finishMode),
-                    #     '@', str(self.device), '|')
-                    pass
+                if self._show_data:
+                    if (self._mode == 0):
+                        print('|', '{:10}'.format(time_stamp),
+                            '|', '{:5}'.format(delta),
+                            '|', '{:6}'.format(ch1),
+                            '|', '{:6}'.format(ch2),
+                            '|', '{:8}'.format(ch3 / 100),
+                            '|', '{:6}'.format(round(voltage_mag)),
+                            '|', '{:5}'.format(int(imag_after_cal)),
+                            '|', '{:5}'.format(int(real_after_cal)),
+                            '|', '{:5}'.format(round(impedance)),
+                            '|', '{:5}'.format(round(phase, 1)),
+                            '|', '{:5}'.format(round(current, 3)),
+                            '|', '{:1}'.format(gain),
+                            '|', '{:1}'.format(finishMode),
+                            '@', str(self.device), '|')
+                        pass
+                    else:
+                        print('|', '{:10}'.format(time_stamp),
+                            '|', '{:5}'.format(delta),
+                            '|', '{:5}'.format(ch1),
+                            '|', '{:5}'.format(ch2),
+                            '|', '{:5}'.format(ch3),
+                            '|', '{:5}'.format(cycle_number),
+                            '|', '{:1}'.format(gain),
+                            '|', '{:1}'.format(finishMode),
+                            '@', str(self.device), '|')
+                        pass
 
         if finishMode == True:
             print("finishMode full data:", list(data), datetime.now())

python/biopro/devlib/device.py

@@ -651,8 +651,6 @@ class DeviceInstruction:
     VIS_DEVICE_DONE = 0x20
     """identify device done"""
 
-    VIS_CC_ZERO = 0x40
-
     VIS_STI = 0xC0
     """stimulation on virtual instruction"""
 
@@ -726,7 +724,6 @@ class DeviceCommonInstruction:
     STOP_STIMULATE = "stop_stimulate"
     VIS_DEVICE_DETECT = 'VIS_DEVICE_DETECT'
     VIS_DEVICE_DONE = 'VIS_DEVICE_DONE'
-    VIS_CC_ZERO = 'VIS_CC_ZERO'
     CIS_VOLT = 'CIS_VOLT'
     CIS_VERSION = 'CIS_VERSION'
 
@@ -750,8 +747,6 @@ class DeviceCommonInstruction:
             return 'VIS_DEVICE_DETECT',
         elif instruction == cls.VIS_DEVICE_DONE:
             return 'VIS_DEVICE_DONE',
-        elif instruction == cls.VIS_CC_ZERO:
-            return 'VIS_CC_ZERO',
         elif instruction == cls.RECORD:
             return 'VIS_STARTR',
         elif instruction == cls.RECORD_ALL:

python/biopro/devlib/library.py

@@ -1105,6 +1105,8 @@ class CompletedDevice(Device):
         return self._configuration.get_parameter(name, False)
     
     def set_multi_parameters(self, parameter):
+        if len(parameter) == 0:
+            return
         for (name, value) in parameter[0].items():
             if name != 'target':
                 self.set_parameter(name, value)
@@ -1128,6 +1130,11 @@ class CompletedDevice(Device):
                 self._parameter.set_parameter(name, value)
                 # raise RuntimeError('illegal parameter value : ' + value) from e
             else:
+                if name == 'MODE':
+                    if self.library_name.startswith('Elite_EDC'):
+                        self.set_parameter('CTRL_HIGH_Z_15', self.get_parameter('HIGHZ_TABLE')[value])
+                        self.set_parameter('TIME_DURATION', 0)
+
                 self._parameter.set_parameter(name, value)
 
         on_change = info.on_change

python/biopro/impl/interface_uart.py

@@ -28,7 +28,7 @@ class UARTInterface(LowLevelHardwareInterface):
         self._serial = serial.Serial(self._port,
                                      baudrate=self._baudrate,
                                      timeout=0,
-                                     writeTimeout=0.01)
+                                     writeTimeout=1)
         # deprecate function name which change at version 3.0
         self._serial.flushInput()
         self._serial.flushOutput()

python/biopro/project/action.py

@@ -24,3 +24,11 @@ class Action():
     @property
     def condition(self):
         return self._condition
+    
+    def as_json(self):
+        return {
+            'id': self._id,
+            'type': self._type,
+            'target': self._target,
+            'condition': self._condition
+        }

python/biopro/project/condition.py

@@ -45,8 +45,8 @@ class Condition():
         # print(operator, x, y)
         cases = {
             "equal": lambda a, b: a == b,
-            "bigger": lambda a, b: a > b,
-            "smaller": lambda a, b: a < b,
+            "bigger": lambda a, b: a >= b,
+            "smaller": lambda a, b: a <= b,
         }
 
         return cases[operator](x, y)
@@ -56,7 +56,8 @@ class Condition():
         return getattr(self, self.type)(**kwargs)
        
     def absolute_time(self, **kwargs):
-        now = int(time())
+        # now = int(time())
+        now = round(time(), 1)
         time_condition = round(self.datetime_to_timestamp(self.str_to_datetime(self._value)))
 
         return self.compareWith(self.comparsion, now, time_condition)
@@ -65,32 +66,80 @@ class Condition():
         project_start_time = kwargs['project_start_time']
         delay_time = kwargs['delay_time']
 
-        time_diff = int(time() - project_start_time - delay_time)
-        return self.compareWith(self.comparsion, time_diff, int(self._value))
+        # time_diff = int(time() - project_start_time - delay_time)
+        time_diff = round(time() - project_start_time - delay_time, 1)
+        return self.compareWith(self.comparsion, time_diff, round(int(self._value), 1))
     
     def after_task_run(self, **kwargs):
-        # print('relative_time_from_task', kwargs,kwargs['task_start_time'],kwargs['delay_time'])
+        # print('relative_time_from_task', kwargs['task_start_time'],kwargs['delay_time'])
         if len(kwargs['task_start_time']) == 0:
             return False
+        task = kwargs['self_task']
+        running_task = kwargs['running_task']
         task_start_time = kwargs['task_start_time'][-1]
         delay_time = kwargs['delay_time']
-
-        time_diff = int(time() - task_start_time - delay_time)
-        # print('time_diff',  time_diff)
-        return self.compareWith(self.comparsion, time_diff, int(self._value))
+        
+        time_diff = round(time() - task_start_time - delay_time, 1)
+        # print('real_diff', time() - task_start_time - delay_time)
+        # print(task.name, task.uuid, time_diff, round(int(self._value), 1), running_task.name, running_task.uuid)
+        # if round(int(self._value), 1) == 0 and time_diff == 0.1:
+        #     return True
+        if task.uuid != running_task.uuid:
+            return False
+        return self.compareWith('bigger', time_diff, round(int(self._value), 1))
+        # return self.compareWith(self.comparsion, time_diff, round(int(self._value), 1))
     
     def device(self, **kwargs):
         print('device')
     
-    def previous_task_done(self, **kwargs):
+    """ def previous_task_done(self, **kwargs):
         running_task = kwargs['running_task']
         if running_task.status == 2 and self._active == False:
             self._active = True
             return True
+        return False """
+
+    def previous_task_done(self, **kwargs):
+        running_task = kwargs['running_task']
+        self_task = kwargs['self_task']
+        # if running_task != None and self_task != None:
+        # print('\nprevious_task_done: ', running_task.status, ' ', self._active)
+        if running_task != self_task:
+            if running_task == None:
+                return True
+            if running_task.status == 2 and self._active == False:
+                # self._active = True
+                return True
         return False
 
+    def until_button_trigger(self, **kwargs):
+        running_task = kwargs['running_task']
+        if running_task != None:
+            if running_task.button_trigger == True:
+                running_task.button_trigger = False
+                return True
+        return False 
+    
+    """ def cycle(self, **kwargs):
+        running_task = kwargs['running_task']
+        self_task = kwargs['self_task']
+        if running_task != self_task:
+            if running_task.status == 2 and self._active == False:
+                # self._active = True
+                return True
+        return False """
+
     def str_to_datetime(self, time_str):
         return datetime.strptime(time_str,'%Y-%m-%dT%H:%M')
 
     def datetime_to_timestamp(self, date):
-        return datetime.timestamp(date)
+        return datetime.timestamp(date)
+
+    def as_json(self):
+        return {
+            'id': self._id,
+            'type': self._type,
+            'comparsion': self._comparsion,
+            'value': self._value,
+            'active': self._active
+        }

python/biopro/project/instruction.py

@@ -22,6 +22,7 @@ class Instruction():
     
         self._start_instruction = list(map(lambda ins: self._instruction_set[ins] ,['set_file_name', 'set_parent', 'set_parameter', 'call_instruction']))
         self._stop_instruction = list(map(lambda ins: self._instruction_set[ins] ,['call_instruction']))
+        self._idle_instruction = []
     
     @property
     def start(self) -> list:
@@ -29,4 +30,8 @@ class Instruction():
     
     @property
     def stop(self) -> list:
-        return self._stop_instruction
+        return self._stop_instruction
+
+    @property
+    def idle(self) -> list:
+        return self.idle_instruction

python/biopro/project/project.py

@@ -19,12 +19,12 @@ key_list = {
 }
 
 class Project(threading.Thread):
-  def __init__(self, project, device_manager: DeviceManager, mqttThread = None, name="project"):
+  def __init__(self, project, device_manager: DeviceManager, mqttThread = None, log_verbose = None, name="project"):
     super(Project, self).__init__(name = name)
     self._project = project
     self._device_manager = device_manager
     self._mqtt_thread = mqttThread
-    self._time_interval = 1
+    self._time_interval = 0.1
     self._start_time = None
     self._end_time = None
 
@@ -41,6 +41,12 @@ class Project(threading.Thread):
 
     self._task_manager = None
 
+    self._cycle = []
+
+    self._count = 1 #流水號
+
+    self.log_verbose = log_verbose
+
     self.setup_project(project)
     self.setup_device(self._device)
   
@@ -50,7 +56,7 @@ class Project(threading.Thread):
         key = key_list[key]
 
       if key == 'task':
-        self._task_manager = TaskManager(project['task'])
+        self._task_manager = TaskManager(project['task'], project['cycle'])
       elif key == 'uuid':
         pass
       else:
@@ -84,6 +90,14 @@ class Project(threading.Thread):
   @name.setter
   def name(self, new_name):
     self._name = new_name
+  
+  @property
+  def cycle(self) -> list:
+    return self._cycle
+  
+  @cycle.setter
+  def cycle(self, new_cycle):
+    self._cycle = new_cycle
 
   @property
   def desc(self) -> str:
@@ -117,9 +131,14 @@ class Project(threading.Thread):
   def mqtt_thread(self):
     return self._mqtt_thread
 
+  @property
+  def running_task(self):
+    return self._task_manager.running_task
+
   def run(self):
       self._status = 1
       self._start_time = time()
+      self.log_verbose('Project ' + self.name + ' start')
       self.mqtt_thread.broadcast_command('project:' + self._name + ' start at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
       
       while not self._stop_flag :
@@ -130,41 +149,92 @@ class Project(threading.Thread):
         for task in check_list:
           if task != None:
             now = time()
-            # print('round task', task.name)
-            # print('running task', self._task_manager.running_task.name, self._task_manager.running_task.status)
-            # if self._task_manager.prev_task != None:
-            #   print('previous_task', self._task_manager.prev_task.name, self._task_manager.prev_task.status)
 
             match_condition_list = task.check_condition(
               project_start_time = self._start_time,
               delay_time = delay_time,
               running_task= self._task_manager.running_task,
-              previous_task =  self._task_manager.prev_task
+              previous_task =  self._task_manager.prev_task,
+              self_task = task
             )
-            # print('match_condition_list', match_condition_list)
+
             for condition in match_condition_list:
               match_action_list = task.get_match_action(condition.id)
               for action in match_action_list:
-                # print('match_action', action.type, action.target)
-                if action.type == 'start' and task.status != 1:
-                  self._task_manager.set_running_task(task)
+                if action.type == 'cycle' and condition.type == 'previous_task_done':
                   self.mqtt_thread.broadcast_command('project:task ' + task.name + ' start at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
+                  self._task_manager.set_running_task(task)
+                if action.type == 'cycle' and condition.type == 'until_button_trigger':
+                  self._task_manager.running_task.stop()
 
-                device = self._complete_device[action.target]
-                task_info = task.get_task_info(action)
-                instruction_set = getattr(self._instruction_set, action.type, None)
-                # print('instruction_set',instruction_set)
-                
-                if instruction_set != None:
-                  for instruction in instruction_set:
-                    args = list(map(lambda arg: task_info[arg], instruction['arguments']))
-                    threading.Thread(target=getattr(device, instruction['method'])(*args))
+                if self._task_manager.running_task != None:
+                  if self._task_manager.running_task.uuid == task.uuid and action.type == 'cycle' and condition.type == 'after_task_run':
+                    self._task_manager.running_task.stop()
+
+                if action.type == 'start':
+                  if task.status != 1:
+                    self._task_manager.set_running_task(task)
+                    self.mqtt_thread.broadcast_command('project:task ' + task.name + ' start at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
+                # elif action.type == 'stop':
+                  # self.mqtt_thread.broadcast_command('project:task ' + str(self._task_manager.running_task.name) + ' stop at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
+                  # self._count += 1
+                  # if self.check_running_task_not_run() == True:
+                  #   self._task_manager.running_task.stop()
+
+                elif action.type == 'idle':
+                  self._task_manager.running_task.stop()
+
+                instruction_set = None
+
+                if action.target is not None:
+                  device = self._complete_device[action.target]
+                  if ((action.type == 'start' and device.status == 0) or (action.type == 'stop' and device.status == 1)):
+                    self.log_verbose('Project' + self.name + 'Task ' + task.name + ' match_condition ' + condition.type + ' trigger_action ' + action.type + ' ' + str(action.target))
+                    task_info = task.get_task_info(action)
+                    instruction_set = getattr(self._instruction_set, action.type, None)
+                    
+                    # 檔名修正
+                    # device
+                    task_info['file_name'] += '#' + device.mac_address_in_str[12:].upper()
+                    # 流水號
+                    task_info['file_name'] += '#' + str(self._count)
+
+                    # 添加cycle資訊
+                    if len(self.cycle) > 0:
+                      index = self._task_manager.get_index_by_task(task)
+                      # get list of cycle determine by index of task
+                      filtered = list(filter(lambda info: self._task_manager.get_index_by_uuid(info['range'][0]) < index and self._task_manager.get_index_by_uuid(info['range'][1]) > index, self.cycle))
+                      
+                      if len(filtered) == 0:
+                        pass
+                      elif len(filtered) == 1:
+                        if filtered[0]['useID'] == True:
+                          task_info['file_name'] += '#' + str(filtered[0]['id'])
+                        else:
+                          task_info['file_name'] += '#' + str(filtered[0]['name']) + '-' + str(filtered[0]['count'])
+                      else:
+                        # if multi cycle, then sort by range from task index to cycle start index, then loop concat filename
+                        filtered.sort(key=lambda info: abs(self._task_manager.get_index_by_uuid(info['range'][0]) - index))
+                        for cycle_info in filtered:
+                          if cycle_info['useID'] == True:
+                            task_info['file_name'] += '#' + str(cycle_info['id'])
+                          else:
+                            task_info['file_name'] += '#' + str(cycle_info['name']) + '-' + str(cycle_info['count'])
+                    self.log_verbose('file name ' + task_info['file_name'])
+                    
+                  if instruction_set != None and len(task.parameter_set) > 0:
+                    if action.type == 'start':
+                      self._count += 1
+                    for instruction in instruction_set:
+                      args = list(map(lambda arg: task_info[arg], instruction['arguments']))
+                      target=getattr(device, instruction['method'])(*args)
             
             delay_time += (time() - now)
 
         # check task not running then stop
         if self.check_running_task_not_run() == True:
-          self.mqtt_thread.broadcast_command('project:task ' + str(self._task_manager.running_task.name) + ' stop at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
+          if self._task_manager.running_task.type == '':
+            self.mqtt_thread.broadcast_command('project:task ' + str(self._task_manager.running_task.name) + ' stop at ' + datetime.now().strftime('%Y-%m-%d %H:%M:%S.%f')[:-3])
           self._task_manager.running_task.stop()
         
         # check project done then close project
@@ -200,17 +270,43 @@ class Project(threading.Thread):
         return False
     return True
   
+  def set_content(self, content):
+    self.running_task.button_trigger = True
+  
+  def set_cycle(self, index, content):
+    # change cycle name
+    for key in content:
+      self.cycle[index][key] = content[key]
+
+    # change task name
+    # self._task_manager.get_task_by_uuid(self.cycle[index]['range'][0]).name = content['name']
+    # self._task_manager.get_task_by_uuid(self.cycle[index]['range'][1]).name = content['name']
+  
   def check_running_task_not_run(self):
     # if no running task
     if self._task_manager.running_task == None:
       return False
-
+    
+    # if running is cycle then no need to stop by device
+    if self._task_manager.running_task.type == 'cycle':
+      return False
+    
+    for key in self._task_manager.running_task.action:
+      # print('action key', key, self._task_manager.running_task, self._task_manager.running_task.action[key])
+      if len(self._task_manager.running_task.parameter_set) == 0 and self._task_manager.running_task.action[key]['type'] == 'stop':
+        return False
+      if len(self._task_manager.running_task.parameter_set) == 0 and self._task_manager.running_task.action[key]['type'] == 'idle':
+        return False
+      
     for device in self._task_manager.running_task.device:
       if self._complete_device[device].status == 1:
         return False
     return True
   
   def as_json(self):
+    running_task = None
+    if self._task_manager.running_task is not None:
+      running_task = self._task_manager.running_task.as_json()
     data = {
       'id': self._id,
       'name': self._name,
@@ -219,6 +315,7 @@ class Project(threading.Thread):
       'status': self._status,
       'device': self._device,
       'task': self.task_list,
-      'running_task': self._task_manager.running_task.as_json()
+      'running_task': running_task,
+      'cycle': self._cycle
     }
     return data

python/biopro/project/project_manager.py

@@ -9,13 +9,14 @@ def json_stringify(o: Any) -> str:
     return _json_stringify(o, separators=(',', ':'))
 
 class ProjectManager():
-    def __init__(self, device_manager: DeviceManager, mqtt_thread=None) :
+    def __init__(self, device_manager: DeviceManager, mqtt_thread=None, log_verbose = None) :
         self._project_list = []
         self._mqtt_thread =  mqtt_thread
         self._device_manager = device_manager
+        self.log_verbose = log_verbose
     
     def create(self, project):
-      new_project = Project(project, self._device_manager, self._mqtt_thread)
+      new_project = Project(project, self._device_manager, self._mqtt_thread, self.log_verbose)
       self._project_list.append(new_project)
       return new_project
 
@@ -37,3 +38,11 @@ class ProjectManager():
     def stop_project(self, project):
       _project = self.get(project)
       _project.stop()
+    
+    def set_project(self, project_uuid, content):
+      _project = self.get(project_uuid)
+      _project.set_content(content)
+    
+    def set_project_cycle(self, project_uuid, index, content):
+      _project = self.get(project_uuid)
+      _project.set_cycle(index, content)

python/biopro/project/task.py

@@ -12,29 +12,39 @@ key_list = {
 class Task:
   def __init__(self, task):
     self._id = None
+    self._uuid = None
+    self._type = None
     self._name = None
     self._parent = None
     self._cycle = None
+    self._cycle_count = 0
+    self._cycle_next = None
+    self._cycle_next_uuid = None
     self._device = None
     self._event = None
     self._trigger = None
     self._parameter_set = None
     self._condition = None
     self._action = None
-    # -1: initial 0: start(idle), 1: running, 2: close(idle)
+    # -1: init 0: start(idle), 1: run, 2: close(idle)
     self._status = 0
     self._next = None
 
+    # action & condition info
     self._condition_list: List[Condition] = []
     self._action_list: List[Action] = []
     self._instruction_list = []
     self._record_list = []
 
+    # time info
     self._start_time = []
     self._idle_time = []
     self._end_time = []
     self._period = None
 
+    # trigger info
+    self._button_trigger = False
+
     self.load_task(task)
   
   def load_task(self, task) -> None:
@@ -74,6 +84,14 @@ class Task:
   @uuid.setter
   def uuid(self, new_uuid):
     self._uuid = new_uuid
+
+  @property
+  def type(self):
+    return self._type
+  
+  @type.setter
+  def type(self, new_type):
+    self._type = new_type
   
   @property
   def name(self):
@@ -100,6 +118,31 @@ class Task:
   @cycle.setter
   def cycle(self, new_cycle):
     self._cycle = new_cycle
+
+  # TODO: not sure needed?
+  @property
+  def cycle_count(self) -> int:
+    return self._cycle_count
+  
+  @cycle_count.setter
+  def cycle_count(self, new_cycle_count):
+    self._cycle_count = new_cycle_count
+    
+  @property
+  def cycle_next(self) -> str:
+    return self._cycle_next
+  
+  @cycle_next.setter
+  def cycle_next(self, new_cycle_next):
+    self._cycle_next = new_cycle_next
+
+  @property
+  def cycle_next_uuid(self) -> str:
+    return self._cycle_next_uuid
+  
+  @cycle_next_uuid.setter
+  def cycle_next_uuid(self, new_cycle_next_uuid):
+    self._cycle_next_uuid = new_cycle_next_uuid
   
   @property
   def device(self) -> dict:
@@ -177,6 +220,14 @@ class Task:
   def end_time(self) -> List:
     return self._end_time
   
+  @property
+  def button_trigger(self) -> List:
+    return self._button_trigger
+  
+  @button_trigger.setter
+  def button_trigger(self, button_trigger):
+    self._button_trigger = button_trigger
+  
   def new_start_time(self):
     self._start_time.append(time())
   
@@ -207,6 +258,10 @@ class Task:
   
   def stop(self):
     self.status = 2
+  
+  def reset(self):
+    self.status = -1
+    # self.status = 0
 
   def get_match_action_list(self, match_condition_list):
     return map(lambda condition: [x for x in self._action_list if condition.id in x.get_condition_list()], match_condition_list)
@@ -230,7 +285,7 @@ class Task:
     return {
       'device': action.target,
       'parameter': self.get_parameter_set_by_device(action.target),
-      'file_name': self._name + '-' + str(action.target),
+      'file_name': self._name,
       'parent': self.parent,
       'instruction': _type
     }
@@ -240,7 +295,12 @@ class Task:
       'id': self.id,
       'name': self.name,
       'parent': self.parent,
+      'type': self.type,
+      'uuid': self.uuid,  
       'cycle': self.cycle,
+      'cycle_count': self.cycle_count,
+      'cycle_next': self.cycle_next,
+      'cycle_next_uuid': self.cycle_next_uuid,
       'device': self.device,
       'event': self.event,
       'trigger': self.trigger,

python/biopro/project/task_manager.py

@@ -12,11 +12,12 @@ def json_stringify(o: Any) -> str:
     return _json_stringify(o, separators=(',', ':'))
 
 class TaskManager():
-    def __init__(self, task_list):
+    def __init__(self, task_list, cycle_list):
       self._task_list = []
       self._next_task = []
       self._prev_task = None
       self._running_task = None
+      self._cycle_list = cycle_list
       
       self.load_task_list(task_list)
 
@@ -44,6 +45,23 @@ class TaskManager():
     def next_task(self):
       return self._next_task
 
+    def get_task_by_index(self, index):
+      return self._task_list[index]
+
+    def get_task_by_uuid(self, uuid):
+      return next((x for x in self.task_list if x.uuid == uuid), None)
+    
+    def get_index_by_task(self, task):
+      return next((i for i, x in enumerate(self.task_list) if x.uuid == task.uuid), None)
+    
+    def get_index_by_uuid(self, uuid):
+      return next((i for i, x in enumerate(self.task_list) if x.uuid == uuid), None)
+
+    def check_task_is_cycle_end(self, task):
+      for index, cycle in enumerate(self._cycle_list):
+        if cycle['range'][1] == task.uuid:
+          return index
+
     @property
     def check_list(self):
       return [self._running_task, *self._next_task]
@@ -57,7 +75,8 @@ class TaskManager():
         task = Task(task) 
         self._task_list.append(task)
     
-    def set_running_task(self, task):
+    # original version
+    """ def set_running_task(self, task):
       try:
         # if there is task running & same task active ,then reject
         if self._running_task != None and self._running_task.uuid == task.uuid:
@@ -80,6 +99,51 @@ class TaskManager():
           _task = next((task for task in self._task_list if task.uuid == task_uuid), None)
           if _task != None:
             self._next_task.append(_task)
+      except RuntimeError as e:
+        print(e) """
+      
+    def set_running_task(self, task):
+      try:
+        # if there is task running & same task active ,then reject
+        if self._running_task != None and self._running_task.uuid == task.uuid:
+          return False
+
+        # save task
+        self._prev_task = self._running_task
+        # clear next task list
+        self._next_task.clear()
+        # set task to running_task
+        self._running_task = task
+        self._running_task.run()
+
+        # if previous task is still running, then need to close
+        if self._prev_task != None:
+          if self._prev_task.status == 1:
+            self._prev_task.stop()
+        # if reach cycle end, count < max, then go to cycle start
+        cycle_index = self.check_task_is_cycle_end(task)
+        if cycle_index is None:
+          # print('next', self._running_task.name, self._running_task.next)
+          for task_uuid in self._running_task.next:
+            _task = next((task for task in self._task_list if task.uuid == task_uuid), None)
+            if _task != None:
+              _task.reset()
+              self._next_task.append(_task)
+          # print('self._next_task', self._next_task)
+        else:
+          # print('cycle', self._cycle_list[cycle_index])
+          cycle = self._cycle_list[cycle_index]
+          if int(cycle['count']) < int(cycle['max']):
+            self._next_task.append(self.get_task_by_uuid(cycle['range'][0]))
+            cycle['count'] += 1
+          else:
+            for task_uuid in self._running_task.next:
+              _task = next((task for task in self._task_list if task.uuid == task_uuid), None)
+              if _task != None:
+                _task.reset()
+                self._next_task.append(_task)
+            cycle['count'] = 1
+
       except RuntimeError as e:
         print(e)
 

python/biopro/recording/file.py

@@ -1131,14 +1131,17 @@ class RecordingFileWriter:
         self._splitting_size = 0
         return None
 
-    def close(self):
-        # if self._recording_file is not None:
-        #     self._recording_file.close()
-        #     self._recording_file = None
-        print('close1')
+    def close(self, mqtt_thread):
         self._close = True
         if len(self._recording_file_dict) > 0:
             for ch in self._data_db.keys():
+                if len(self._data_rl[ch]) > 0:
+                    self._data_rl[ch].append(str(int(self._time_now)))
+                    mes = ' '.join(self._data_rl[ch])
+                    mqtt_thread[ch].on_message(mes)
+                    self._data_rl[ch].clear()
+                    self._send_data[ch] = False
+
                 if self._recording_file_dict[ch]._status:
                     _data = ' '.join(self._data_db[ch])
                     self._raw_save['data'][ch] = _data

python/biopro/server/data.py

@@ -65,7 +65,7 @@ class DataServer(SocketServer, DataAPI):
         """
         global _FLAG_DATA_LOST_STATS_
 
-        super().__init__(DataAPI, 'DataServer', self.ADDR, socket_listen=3)
+        super().__init__(DataAPI, 'DataServer', self.ADDR, socket_listen=20)
 
         data_options = DataServerOptions.get_options(*options)
 
@@ -664,13 +664,15 @@ class DataServer(SocketServer, DataAPI):
             data = None
 
         if data is not None:
-            if self._configurations[device].queue_flag:
-                self._configurations[device].queue_flag = False
-                print("q size= ", self._configurations[device]._queue_rec.qsize())
-
-            self._configurations[device].put_rec_queue(data)
-            # self._no_data_total_duration = 0
-            ret = True
+            if self._configurations.get(device, None) != None:
+                if self._configurations[device].queue_flag:
+                    self._configurations[device].queue_flag = False
+                    print("q size= ", self._configurations[device]._queue_rec.qsize())
+            
+            if self._configurations.get(device, None) != None:
+                self._configurations[device].put_rec_queue(data)
+                # self._no_data_total_duration = 0
+                ret = True
         # else:
         #     time_diff = time() - self._recv_memory_cost_time
         #     self._no_data_total_duration += time_diff
@@ -699,6 +701,9 @@ class DataServer(SocketServer, DataAPI):
                 self.mqtt_thread.publish('device_instruction', json_stringify(content), inter = True)
 
         return True
+    
+    def show_data(self, device):
+        self._configurations[device].put_rec_queue('show_data')
 
 class DataRuntime(metaclass=abc.ABCMeta):
     __slots__ = ('_server', '_device', '_meta_file', '_data_format',

python/biopro/server/main.py

@@ -105,7 +105,7 @@ class ControlServer(SocketServer, ControlServerAPI):
         # device detect
         self._detect_device_thread = RoutineConnectDeviceThread(self._device_manager, self.mqtt_thread, self.led_thread, 3)
 
-        self._project_manager = ProjectManager(self.device_manager, self.mqtt_thread)
+        self._project_manager = ProjectManager(self.device_manager, self.mqtt_thread, self.log_verbose)
 
         if not c.flag_disable_led_control:
             self.led_thread.set_state(LED.COLOR_RED)
@@ -819,12 +819,18 @@ class ControlServer(SocketServer, ControlServerAPI):
         return True
 
     @logging_info
-    def device_battery(self) -> List[int]:
-        device_list = self.device_manager.list_device()
-        if len(device_list) > 0:
-            battery_list = list(map(lambda x: self.device_manager.get_device(x).battery, device_list))
-
-        return battery_list
+    def device_battery(self, device:int) -> List[int]:
+        battery = {}
+        if device == 'all':
+            device_list = self.device_manager.list_device()
+            if len(device_list) > 0:
+                battery = list(map(lambda x: {"device": x.memory_board, "battery":self.device_manager.get_device(x).battery}, device_list))
+        else:
+            battery = {
+                "device": device,
+                "battery": self.device_manager.get_device(device).battery
+            }
+        return battery
 
     @logging_info
     def device_parent(self, device: int, content: Optional[str] = None) -> List[int]:
@@ -1015,6 +1021,7 @@ class ControlServer(SocketServer, ControlServerAPI):
     @logging_info
     def run_project(self, project) -> bool:
         if project is not None:
+            # print(project)
             project = self._project_manager.create(project)
             self._project_manager.run_project(project)
         return  project.as_json()
@@ -1024,6 +1031,18 @@ class ControlServer(SocketServer, ControlServerAPI):
         if project is not None:
             self._project_manager.stop_project(project)
         return True
+    
+    @logging_info
+    def set_project(self, project, content) -> bool:
+        if project is not None:
+            self._project_manager.set_project(project, content)
+        return True
+    
+    @logging_info
+    def set_project_cycle(self, project, index, content) -> bool:
+        if project is not None:
+            self._project_manager.set_project_cycle(project, index, content)
+        return True
 
     @logging_info
     def get_running_project(self) -> bool:
@@ -1339,6 +1358,13 @@ class ControlServer(SocketServer, ControlServerAPI):
         def _hardware_send_test_set(self, options: Dict[str, str]) -> bool:
             # TODO write options files
             return False
+        
+        @logging_info
+        def show_device_data(self, device: int):
+            client = self.data_server.client()
+            if client is not None:
+                with client:
+                    client.show_data(device)
 
 class _RandomCrashThread(ServerThread):
     def __init__(self):

python/biopro/server/recording.py

@@ -185,6 +185,8 @@ class RecordingProcess(Process):
                 self.final_write()
                 self.is_closed = True
                 return False
+            elif q == 'show_data':
+                self._decoder._show_data = not self._decoder._show_data
             else:
                 self.rec_update()
                 self.sync_data(q)
@@ -229,25 +231,6 @@ class RecordingProcess(Process):
                 #     except:
                 #         pass
 
-                try:
-                    time_duration = self._meta_file.configuration.get_parameter('TIME_DURATION')
-                    if time_duration and time_duration is not 0 and time() - self._start_time >= time_duration:
-                        self._queue_msg.put(['ds', self._device, 'interrupt'])
-                        return None
-
-                    if isinstance(self._decoder, I4V4Z4T4DataDecoder) or isinstance(self._decoder, EISZeroOneDataDecoder):
-                        if self._decoder.isFinishMode is not None and self._decoder.isFinishMode() == 1:
-                            self._queue_msg.put(['ds', self._device, 'interrupt'])
-                            return None
-                            # content = {}
-                            # content['header'] = 'device_instruction/0'
-                            # content['device'] = result.device
-                            # content['instruction'] = 'interrupt'
-                            # self._mqtt_thread.publish('device_instruction',json_stringify(content), True)
-                            # self.server.stop_sync(self.device)
-                except RuntimeError as e:
-                    print(e)
-
                 if result is not None:
                     ##
                     if len(self._mqtt_send_data_ch_level) == 0:
@@ -264,9 +247,27 @@ class RecordingProcess(Process):
                 self._writer.channels_update(ret[0].channels())
             self._writer.write(ret, self._mqtt_send_data_ch_level)
         # print('write time: ', time() - ctime1)
-
         # print(ret)
 
+        try:
+            time_duration = self._meta_file.configuration.get_parameter('TIME_DURATION')
+            if time_duration and time_duration is not 0 and time() - self._start_time >= time_duration:
+                self._queue_msg.put(['ds', self._device, 'interrupt'])
+                return None
+
+            if isinstance(self._decoder, I4V4Z4T4DataDecoder) or isinstance(self._decoder, EISZeroOneDataDecoder):
+                if self._decoder.isFinishMode is not None and self._decoder.isFinishMode() == 1:
+                    self._queue_msg.put(['ds', self._device, 'interrupt'])
+                    return None
+                    # content = {}
+                    # content['header'] = 'device_instruction/0'
+                    # content['device'] = result.device
+                    # content['instruction'] = 'interrupt'
+                    # self._mqtt_thread.publish('device_instruction',json_stringify(content), True)
+                    # self.server.stop_sync(self.device)
+        except RuntimeError as e:
+            print(e)
+
         del ret
         del data
         return 
@@ -607,7 +608,7 @@ class RecordingProcess(Process):
 
     def final_write(self):
         if self._writer is not None:
-            return self._writer.close()
+            return self._writer.close(self._mqtt_send_data_ch_level)
         else:
             return False
     

python/biopro/util/socket.py

@@ -93,13 +93,15 @@ class SocketClient(metaclass=abc.ABCMeta):
         if self._socket is None:
             try:
                 self._socket = Socket(AF_UNIX, SOCK_STREAM)
-                self._socket.settimeout(1)
+                self._socket.settimeout(3)
                 self._socket.connect(self._socket_file)
-            except FileNotFoundError as e:
-                raise RuntimeError('server not available') from e
+            except Exception as e:
+                print('open_socket error:', e)
+            # except FileNotFoundError as e:
+            #     raise RuntimeError('server not available') from e
 
-            except ConnectionRefusedError as e:
-                raise RuntimeError('server crash') from e
+            # except ConnectionRefusedError as e:
+            #     raise RuntimeError('server crash') from e
 
     def close_socket(self):
         if self._socket is not None:

python/res/devlib/json/Elite_BAT_1.0.devlib.json

@@ -1203,7 +1203,7 @@
         "pe": "SAMPLE_RATE"
       },
       "data": [
-        "X07;",
+        "X0C;",
         "B>va;4B>vb;2B>vc;2B>vd;",
         "4b>pa;4b>pb;",
         "4b>pc;4b>pd;",
@@ -1633,16 +1633,6 @@
     "dpv_engineering_mode_advanced": [
       "dpv_advanced_mode"
     ],
-    "VIS_CC_ZERO": [
-      "_data_format('I4V4Z4T4')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "set_adc_gain_I",
-      "set_adc_gain_Vin",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"

python/res/devlib/json/Elite_EDC_1.4.devlib.json

@@ -492,14 +492,6 @@
         "1XC0;1X02;4B>ve;2B>vf;4B>vg;B>cn"
       ]
     },
-    "VIS_CC_ZERO": [
-      "_data_format('I4V4Z4T4')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
     "curve_cv3_high_cycle": {
       "type": "RIS",
       "parameter": {

python/res/devlib/json/Elite_EDC_1.5.devlib.json

@@ -15,6 +15,33 @@
     "BLE_WRITE_MAX": 255
   },
   "parameters": {
+    "HIGHZ_TABLE": {
+      "initial": [
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1,
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1
+      ],
+      "domain": {
+        "list": [
+          100
+        ]
+      },
+      "value": "VALUE"
+    },
     "DPV_e_init": {
       "description": "DPV initial voltage ",
       "record_meta": true,
@@ -671,6 +698,17 @@
       },
       "on_change": "set_para_DAC_VOLT"
     },
+    "DAC_VOLT_SCROLL": {
+      "description": "DAC scroll output Voltage",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        65536
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
     "ADC_VALUE_I": {
       "description": "ADC value current value",
       "domain": "int"
@@ -836,6 +874,18 @@
       ],
       "on_change": "set_dac_gain_Vout"
     },
+    "DAC_VOLT_BUTTON": {
+      "description": "DAC volt",
+      "record_meta": true,
+      "initial": 1,
+      "value": [
+        "10000",
+        "25000",
+        "50000",
+        "60000"
+      ],
+      "on_change": "cali_Vout"
+    },
     "CTRL_HIGH_Z_15": {
       "description": "ctrl highZ level",
       "record_meta": true,
@@ -851,7 +901,8 @@
       "initial": 0,
       "value": [
         "Iin",
-        "Vin"
+        "Vin",
+        "Vout"
       ]
     },
     "BLE_WRITE": {
@@ -912,11 +963,13 @@
       "_notify(True)",
       "set_adc_gain_I",
       "set_adc_gain_Vin",
+      "set_dac_gain_Vout",
       {
         "expression": "ADC_DAC_CHANNEL_15",
         "when": {
           "0": "cali_Iin",
-          "1": "cali_Vin"
+          "1": "cali_Vin",
+          "2": "cali_Vout"
         }
       },
       "_sync(True)",
@@ -1007,12 +1060,6 @@
         "XE0;2B>va"
       ]
     },
-    "set_dac_gain_Vout": {
-      "type": "RIS",
-      "data": [
-        "XE1;X02;B>DAC_LEVEL_V_OUT_15"
-      ]
-    },
     "set_adc_gain_I": {
       "type": "RIS",
       "data": [
@@ -1025,6 +1072,12 @@
         "XE1;X01;B>ADC_LEVEL_V_IN_15"
       ]
     },
+    "set_dac_gain_Vout": {
+      "type": "RIS",
+      "data": [
+        "XE1;X02;B>DAC_LEVEL_V_OUT_15"
+      ]
+    },
     "set_ctrl_highZ": {
       "type": "RIS",
       "data": [
@@ -1052,13 +1105,22 @@
         "XF1;B>ADC_DAC_CHANNEL_15;B>ADC_LEVEL_V_IN_15"
       ]
     },
+    "cali_Vout": {
+      "type": "RIS",
+      "parameter": {
+        "v": "DAC_VOLT_BUTTON"
+      },
+      "data": [
+        "XF1;B>ADC_DAC_CHANNEL_15;B>v"
+      ]
+    },
     "curve_iv": {
       "type": "RIS",
       "parameter": {
         "va": "VOLT_ORIGIN",
         "vb": "VOLT_FINAL",
         "vc": "VOLT_STEP",
-        "vd": "STEP_TIME * 0x12",
+        "vd": "STEP_TIME",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",
@@ -1079,7 +1141,7 @@
         "va": "VOLT_ORIGIN",
         "vb": "VOLT_FINAL",
         "vc": "VOLT_STEP",
-        "vd": "STEP_TIME * 0x12",
+        "vd": "STEP_TIME",
         "ve": "CYCLE_NUMBER",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
@@ -1203,7 +1265,7 @@
         "pe": "SAMPLE_RATE"
       },
       "data": [
-        "X07;",
+        "X0C;",
         "B>va;4B>vb;2B>vc;2B>vd;",
         "4b>pa;4b>pb;",
         "4b>pc;4b>pd;",
@@ -1633,16 +1695,6 @@
     "dpv_engineering_mode_advanced": [
       "dpv_advanced_mode"
     ],
-    "VIS_CC_ZERO": [
-      "_data_format('I4V4Z4T4')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "set_adc_gain_I",
-      "set_adc_gain_Vin",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"

python/res/devlib/json/Elite_EDC_1.5r2.devlib.json

@@ -15,6 +15,33 @@
     "BLE_WRITE_MAX": 255
   },
   "parameters": {
+    "HIGHZ_TABLE": {
+      "initial": [
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1,
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1
+      ],
+      "domain": {
+        "list": [
+          100
+        ]
+      },
+      "value": "VALUE"
+    },
     "DPV_e_init": {
       "description": "DPV initial voltage ",
       "record_meta": true,
@@ -671,6 +698,17 @@
       },
       "on_change": "set_para_DAC_VOLT"
     },
+    "DAC_VOLT_SCROLL": {
+      "description": "DAC scroll output Voltage",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        65536
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
     "ADC_VALUE_I": {
       "description": "ADC value current value",
       "domain": "int"
@@ -836,6 +874,18 @@
       ],
       "on_change": "set_dac_gain_Vout"
     },
+    "DAC_VOLT_BUTTON": {
+      "description": "DAC volt",
+      "record_meta": true,
+      "initial": 1,
+      "value": [
+        "10000",
+        "25000",
+        "50000",
+        "60000"
+      ],
+      "on_change": "cali_Vout"
+    },
     "CTRL_HIGH_Z_15": {
       "description": "ctrl highZ level",
       "record_meta": true,
@@ -851,7 +901,8 @@
       "initial": 0,
       "value": [
         "Iin",
-        "Vin"
+        "Vin",
+        "Vout"
       ]
     },
     "BLE_WRITE": {
@@ -912,11 +963,13 @@
       "_notify(True)",
       "set_adc_gain_I",
       "set_adc_gain_Vin",
+      "set_dac_gain_Vout",
       {
         "expression": "ADC_DAC_CHANNEL_15",
         "when": {
           "0": "cali_Iin",
-          "1": "cali_Vin"
+          "1": "cali_Vin",
+          "2": "cali_Vout"
         }
       },
       "_sync(True)",
@@ -1007,12 +1060,6 @@
         "XE0;2B>va"
       ]
     },
-    "set_dac_gain_Vout": {
-      "type": "RIS",
-      "data": [
-        "XE1;X02;B>DAC_LEVEL_V_OUT_15"
-      ]
-    },
     "set_adc_gain_I": {
       "type": "RIS",
       "data": [
@@ -1025,6 +1072,12 @@
         "XE1;X01;B>ADC_LEVEL_V_IN_15"
       ]
     },
+    "set_dac_gain_Vout": {
+      "type": "RIS",
+      "data": [
+        "XE1;X02;B>DAC_LEVEL_V_OUT_15"
+      ]
+    },
     "set_ctrl_highZ": {
       "type": "RIS",
       "data": [
@@ -1052,13 +1105,22 @@
         "XF1;B>ADC_DAC_CHANNEL_15;B>ADC_LEVEL_V_IN_15"
       ]
     },
+    "cali_Vout": {
+      "type": "RIS",
+      "parameter": {
+        "v": "DAC_VOLT_BUTTON"
+      },
+      "data": [
+        "XF1;B>ADC_DAC_CHANNEL_15;B>v"
+      ]
+    },
     "curve_iv": {
       "type": "RIS",
       "parameter": {
         "va": "VOLT_ORIGIN",
         "vb": "VOLT_FINAL",
         "vc": "VOLT_STEP",
-        "vd": "STEP_TIME * 0x12",
+        "vd": "STEP_TIME",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",
@@ -1079,7 +1141,7 @@
         "va": "VOLT_ORIGIN",
         "vb": "VOLT_FINAL",
         "vc": "VOLT_STEP",
-        "vd": "STEP_TIME * 0x12",
+        "vd": "STEP_TIME",
         "ve": "CYCLE_NUMBER",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
@@ -1203,7 +1265,7 @@
         "pe": "SAMPLE_RATE"
       },
       "data": [
-        "X07;",
+        "X0C;",
         "B>va;4B>vb;2B>vc;2B>vd;",
         "4b>pa;4b>pb;",
         "4b>pc;4b>pd;",
@@ -1633,16 +1695,6 @@
     "dpv_engineering_mode_advanced": [
       "dpv_advanced_mode"
     ],
-    "VIS_CC_ZERO": [
-      "_data_format('I4V4Z4T4')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "set_adc_gain_I",
-      "set_adc_gain_Vin",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"

python/res/devlib/json/Elite_EDC_1.5re.devlib.json

@@ -15,6 +15,33 @@
     "BLE_WRITE_MAX": 255
   },
   "parameters": {
+    "HIGHZ_TABLE": {
+      "initial": [
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1,
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1
+      ],
+      "domain": {
+        "list": [
+          100
+        ]
+      },
+      "value": "VALUE"
+    },
     "DPV_e_init": {
       "description": "DPV initial voltage ",
       "record_meta": true,
@@ -671,6 +698,17 @@
       },
       "on_change": "set_para_DAC_VOLT"
     },
+    "DAC_VOLT_SCROLL": {
+      "description": "DAC scroll output Voltage",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        65536
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
     "ADC_VALUE_I": {
       "description": "ADC value current value",
       "domain": "int"
@@ -836,6 +874,18 @@
       ],
       "on_change": "set_dac_gain_Vout"
     },
+    "DAC_VOLT_BUTTON": {
+      "description": "DAC volt",
+      "record_meta": true,
+      "initial": 1,
+      "value": [
+        "10000",
+        "25000",
+        "50000",
+        "60000"
+      ],
+      "on_change": "cali_Vout"
+    },
     "CTRL_HIGH_Z_15": {
       "description": "ctrl highZ level",
       "record_meta": true,
@@ -851,7 +901,8 @@
       "initial": 0,
       "value": [
         "Iin",
-        "Vin"
+        "Vin",
+        "Vout"
       ]
     },
     "BLE_WRITE": {
@@ -912,11 +963,13 @@
       "_notify(True)",
       "set_adc_gain_I",
       "set_adc_gain_Vin",
+      "set_dac_gain_Vout",
       {
         "expression": "ADC_DAC_CHANNEL_15",
         "when": {
           "0": "cali_Iin",
-          "1": "cali_Vin"
+          "1": "cali_Vin",
+          "2": "cali_Vout"
         }
       },
       "_sync(True)",
@@ -1007,12 +1060,6 @@
         "XE0;2B>va"
       ]
     },
-    "set_dac_gain_Vout": {
-      "type": "RIS",
-      "data": [
-        "XE1;X02;B>DAC_LEVEL_V_OUT_15"
-      ]
-    },
     "set_adc_gain_I": {
       "type": "RIS",
       "data": [
@@ -1025,6 +1072,12 @@
         "XE1;X01;B>ADC_LEVEL_V_IN_15"
       ]
     },
+    "set_dac_gain_Vout": {
+      "type": "RIS",
+      "data": [
+        "XE1;X02;B>DAC_LEVEL_V_OUT_15"
+      ]
+    },
     "set_ctrl_highZ": {
       "type": "RIS",
       "data": [
@@ -1052,13 +1105,22 @@
         "XF1;B>ADC_DAC_CHANNEL_15;B>ADC_LEVEL_V_IN_15"
       ]
     },
+    "cali_Vout": {
+      "type": "RIS",
+      "parameter": {
+        "v": "DAC_VOLT_BUTTON"
+      },
+      "data": [
+        "XF1;B>ADC_DAC_CHANNEL_15;B>v"
+      ]
+    },
     "curve_iv": {
       "type": "RIS",
       "parameter": {
         "va": "VOLT_ORIGIN",
         "vb": "VOLT_FINAL",
         "vc": "VOLT_STEP",
-        "vd": "STEP_TIME * 0x12",
+        "vd": "STEP_TIME",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
         "pc": "DAC_LEVEL_V_OUT_15",
@@ -1079,7 +1141,7 @@
         "va": "VOLT_ORIGIN",
         "vb": "VOLT_FINAL",
         "vc": "VOLT_STEP",
-        "vd": "STEP_TIME * 0x12",
+        "vd": "STEP_TIME",
         "ve": "CYCLE_NUMBER",
         "pa": "ADC_LEVEL_I_15",
         "pb": "ADC_LEVEL_V_IN_15",
@@ -1203,7 +1265,7 @@
         "pe": "SAMPLE_RATE"
       },
       "data": [
-        "X07;",
+        "X0C;",
         "B>va;4B>vb;2B>vc;2B>vd;",
         "4b>pa;4b>pb;",
         "4b>pc;4b>pd;",
@@ -1633,16 +1695,6 @@
     "dpv_engineering_mode_advanced": [
       "dpv_advanced_mode"
     ],
-    "VIS_CC_ZERO": [
-      "_data_format('I4V4Z4T4')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "set_adc_gain_I",
-      "set_adc_gain_Vin",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"

python/res/devlib/json/Elite_EIS_1.0.devlib.json

@@ -62,6 +62,7 @@
       "value": [
         "EIS CURVE",
         "Cyclic Voltammetry",
+        "Chronoamperometric",
         "Dev Mode"
       ]
     },
@@ -265,6 +266,17 @@
         "expression": "VALUE"
       }
     },
+    "VOLT_VSCAN": {
+      "description": "Voltage of VScan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
     "BLE_WRITE": {
       "description": "send msg to elite",
       "domain": {
@@ -295,20 +307,23 @@
       {
         "expression": "MODE",
         "when": {
-          "1": "set_adc_gain_I"
+          "1": "set_adc_gain_I",
+          "2": "set_adc_gain_I"
         }
       },
       {
         "expression": "MODE",
         "when": {
-          "1": "set_adc_gain_Vin"
+          "1": "set_adc_gain_Vin",
+          "2": "set_adc_gain_Vin"
         }
       },
       {
         "expression": "MODE",
         "when": {
           "0": "curve_eis",
-          "1": "curve_cv3"
+          "1": "curve_cv3",
+          "2": "curve_const_vscan"
         }
       },
       {
@@ -424,14 +439,23 @@
         "1XD2;1X02;4B>ve;2B>vf;2B>cn"
       ]
     },
-    "VIS_CC_ZERO": [
-      "_data_format('EISZeroOne')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
+    "curve_const_vscan": {
+      "type": "RIS",
+      "parameter": {
+        "va": "VOLT_VSCAN",
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE"
+      },
+      "data": [
+        "1XD3;",
+        "2B>va;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe"
+      ]
+    },
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"

python/res/devlib/json/Elite_EIS_1.1.devlib.json

@@ -62,6 +62,7 @@
       "value": [
         "EIS CURVE",
         "Cyclic Voltammetry",
+        "Chronoamperometric",
         "Dev Mode"
       ]
     },
@@ -265,6 +266,17 @@
         "expression": "VALUE"
       }
     },
+    "VOLT_VSCAN": {
+      "description": "Voltage of VScan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
     "BLE_WRITE": {
       "description": "send msg to elite",
       "domain": {
@@ -295,20 +307,23 @@
       {
         "expression": "MODE",
         "when": {
-          "1": "set_adc_gain_I"
+          "1": "set_adc_gain_I",
+          "2": "set_adc_gain_I"
         }
       },
       {
         "expression": "MODE",
         "when": {
-          "1": "set_adc_gain_Vin"
+          "1": "set_adc_gain_Vin",
+          "2": "set_adc_gain_Vin"
         }
       },
       {
         "expression": "MODE",
         "when": {
           "0": "curve_eis",
-          "1": "curve_cv3"
+          "1": "curve_cv3",
+          "2": "curve_const_vscan"
         }
       },
       {
@@ -424,14 +439,23 @@
         "1XD2;1X02;4B>ve;2B>vf;2B>cn"
       ]
     },
-    "VIS_CC_ZERO": [
-      "_data_format('EISZeroOne')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
+    "curve_const_vscan": {
+      "type": "RIS",
+      "parameter": {
+        "va": "VOLT_VSCAN",
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE"
+      },
+      "data": [
+        "1XD3;",
+        "2B>va;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe"
+      ]
+    },
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"

python/res/devlib/json/Elite_EIS_MINI_1.0.devlib.json

@@ -62,6 +62,7 @@
       "value": [
         "EIS CURVE",
         "Cyclic Voltammetry",
+        "Chronoamperometric",
         "Dev Mode"
       ]
     },
@@ -265,6 +266,17 @@
         "expression": "VALUE"
       }
     },
+    "VOLT_VSCAN": {
+      "description": "Voltage of VScan",
+      "record_meta": true,
+      "initial": 25000,
+      "domain": [
+        "VOLT_MAX"
+      ],
+      "value": {
+        "expression": "VALUE"
+      }
+    },
     "BLE_WRITE": {
       "description": "send msg to elite",
       "domain": {
@@ -295,20 +307,23 @@
       {
         "expression": "MODE",
         "when": {
-          "1": "set_adc_gain_I"
+          "1": "set_adc_gain_I",
+          "2": "set_adc_gain_I"
         }
       },
       {
         "expression": "MODE",
         "when": {
-          "1": "set_adc_gain_Vin"
+          "1": "set_adc_gain_Vin",
+          "2": "set_adc_gain_Vin"
         }
       },
       {
         "expression": "MODE",
         "when": {
           "0": "curve_eis",
-          "1": "curve_cv3"
+          "1": "curve_cv3",
+          "2": "curve_const_vscan"
         }
       },
       {
@@ -424,14 +439,23 @@
         "1XD2;1X02;4B>ve;2B>vf;2B>cn"
       ]
     },
-    "VIS_CC_ZERO": [
-      "_data_format('EISZeroOne')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
+    "curve_const_vscan": {
+      "type": "RIS",
+      "parameter": {
+        "va": "VOLT_VSCAN",
+        "pa": "ADC_LEVEL_I_15",
+        "pb": "ADC_LEVEL_V_IN_15",
+        "pd": "CTRL_HIGH_Z_15",
+        "pe": "SAMPLE_RATE"
+      },
+      "data": [
+        "1XD3;",
+        "2B>va;",
+        "4b>pa;4b>pb;",
+        "4b>0;4b>pd;",
+        "2B>pe"
+      ]
+    },
     "ble_instru_send": [
       "ble_write",
       "_cdr('20X>ADC_VALUE_I')"

python/res/devlib/json/Elite_MEGAFLY_0.1.devlib.json

@@ -1426,14 +1426,6 @@
         "X80;X03;B>CTRL_HIGH_Z_15"
       ]
     },
-    "VIS_CC_ZERO": [
-      "_data_format('I4V4Z4T4')",
-      "_disable_cache(False)",
-      "_notify(True)",
-      "VIS_CC_ZERO",
-      "_sync(True)",
-      "VIS_STI"
-    ],
     "pulse_fly": [
       "sti_mode",
       "gas1_mode",