microchip-application-pec930-pec930_peripheral/Examples/system/sys_mco/readme.md

system mco

This example is used to run system mco function.

Hardware and Software environment

• This example runs on PEC930 devices.

How to use it ?

In order to make the program work, you must do the following:

• Open your preferred toolchain
• Rebuild all files and load your image into target memory
• Run the example
• GPIO Pin pa2 selection mco output mode
• GPIO Pin pa14 selection mco output

Log

Use serial port(pa15) with baudrate 115200, 8bit, no parity check.

Sep 30 2025 09:28:41
This is a demo to output MCO signal (SysCLK= 60000000)
  Press bottun to change output type (PA2)
  No Output
  MCO output HSI
  MCO output LSI
  MCO output HSI-DIV
  No Output