microchip-application-pec930-pec930_peripheral/Examples/adc/adc_single_conv

adc_single_conv_interrupt

This example is a single channel conversion of ADC with interrupt

• Configure the target ADC channel (AINx)

  // in main.c
  #if 1
      #define CONFIG_ADC_IO_SRC_PORT          GPIOA
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_08
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_02
  #elif 0
      #define CONFIG_ADC_IO_SRC_PORT          GPIOA
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_09
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_03
  #elif 0
      #define CONFIG_ADC_IO_SRC_PORT          GPIOA
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_10
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_04
  #elif 0
      #define CONFIG_ADC_IO_SRC_PORT          GPIOA
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_11
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_05
  #elif 0
      #define CONFIG_ADC_IO_SRC_PORT          GPIOA
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_12
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_06
  #elif 0
      #define CONFIG_ADC_IO_SRC_PORT          GPIOA
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_13
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_07
  #elif 0
      #define CONFIG_ADC_IO_SRC_PORT          GPIOA
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_06
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_08
  #elif 0
      #define CONFIG_ADC_IO_SRC_PORT          GPIOA
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_07
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_09
  #elif 0
      #define CONFIG_ADC_IO_SRC_PORT          GPIOA
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_14
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_10
  #elif 0
      #define CONFIG_ADC_IO_SRC_PORT          GPIOA
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_15
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_11
  #elif 0
      #define CONFIG_ADC_IO_SRC_PORT          GPIOB
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_00
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_12
  #elif 0
      #define CONFIG_ADC_IO_SRC_PORT          GPIOB
      #define CONFIG_ADC_IO_SRC_PIN           GPIO_Pin_01
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_13
  #elif 0
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_14
  #else
      #define CONFIG_TARGGET_ADC_CHANNEL      ADC_Channel_15
  #endif
  

Log

Use serial port with baudrate 115200, 8bit, no parity check.

Sep 30 2025 10:02:19
ADC single channel (AIN-2) conversion with interrupt
  1-th ADC Single Conv Value = 0x920 (2336)
  2-th ADC Single Conv Value = 0x9F7 (2551)
  3-th ADC Single Conv Value = 0xB49 (2889)
  4-th ADC Single Conv Value = 0xB2F (2863)
  5-th ADC Single Conv Value = 0xB62 (2914)
  ...