#ifndef __APP_CONFIG_H__
#define __APP_CONFIG_H__

#ifdef __cplusplus
extern "C"
{
#endif

// LOG
#define NRF_LOG_ENABLED                             1
#define NRF_LOG_DEFAULT_LEVEL                       3
#define NRF_LOG_BACKEND_RTT_ENABLED                 1

#define NRF_LOG_BACKEND_UART_ENABLED                0
#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS       1
#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT            3
#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE        64
#define NRF_LOG_DEFERRED                            0
#define NRF_LOG_USES_TIMESTAMP                      0
#define NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED 0
#define NRF_LOG_MSGPOOL_ELEMENT_COUNT               31

// SEGGER-RTT
#define SEGGER_RTT_SECTION                          ".segger_rtt"
#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS        2
#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS      1
#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP            2048
#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN          16
#define SEGGER_RTT_CONFIG_DEFAULT_MODE              0

// SoftDevice SoC event handler
#define NRF_SDH_SOC_ENABLED                         1

// SoftDevice handler
#define NRF_SDH_ENABLED                             1

// SoftDevice clock configuration
#define NRF_SDH_CLOCK_LF_SRC                        0
#define NRF_SDH_CLOCK_LF_RC_CTIV                    12
#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV               2
#define NRF_SDH_CLOCK_LF_ACCURACY                   1

// SDH Observers - Observers and priority levels
#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS            2
#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS          2
#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS          2

// SoC Observers - Observers and priority levels
#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS            2

// nrf_drv_power - POWER peripheral driver - legacy layer
#define POWER_ENABLED                               1
// The default configuration of main DCDC regulator
#define POWER_CONFIG_DEFAULT_DCDCEN                 0
//  The default configuration of High Voltage DCDC regulator
#define POWER_CONFIG_DEFAULT_DCDCENHV               0

// nrf_drv_clock - CLOCK peripheral driver - legacy layer
#define NRF_CLOCK_ENABLED                           1
//  LF Clock Source
#define CLOCK_CONFIG_LF_SRC                         0
#define CLOCK_CONFIG_LF_CAL_ENABLED                 0
// nrf_section_iter - Section iterator
#define NRF_SECTION_ITER_ENABLED                    1

// State Observers priorities
#define CLOCK_CONFIG_STATE_OBSERVER_PRIO            0
#define POWER_CONFIG_STATE_OBSERVER_PRIO            0
#define RNG_CONFIG_STATE_OBSERVER_PRIO              0

// Stack Event Observers priorities
#define NRF_SDH_SOC_STACK_OBSERVER_PRIO             0
#define NRF_SDH_BLE_STACK_OBSERVER_PRIO             0

// SoC Observers priorities
#define POWER_CONFIG_SOC_OBSERVER_PRIO              0
#define CLOCK_CONFIG_SOC_OBSERVER_PRIO              0

// Interrupt priority
#define POWER_CONFIG_IRQ_PRIORITY                   6
#define CLOCK_CONFIG_IRQ_PRIORITY                   6

// SoftDevice BLE event handler
#define NRF_SDH_BLE_ENABLED                         1
// The number of vendor-specific UUIDs.
#define NRF_SDH_BLE_VS_UUID_COUNT                   2
// Attribute Table size in bytes. The size must be a multiple of 4.
#define NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE             1408
// BLE Observers - Observers and priority levels
#define NRF_SDH_BLE_OBSERVER_PRIO_LEVELS            4
// Include the Service Changed characteristic in the Attribute Table.
#define NRF_SDH_BLE_SERVICE_CHANGED                 1

// This setting configures how Stack events are dispatched to the application.
#define NRF_SDH_DISPATCH_MODEL                      2 /* SoftDevice events are to be fetched manually. */

// BLE Observers priorities - Invididual priorities
#define BLE_ADV_BLE_OBSERVER_PRIO                   1
#define BLE_CONN_PARAMS_BLE_OBSERVER_PRIO           1
#define BLE_CONN_STATE_BLE_OBSERVER_PRIO            0

// Enable Advertising module
#define BLE_ADVERTISING_ENABLED                     1

// BLE device name
#define DEF_ELITE_DEV                               0x00000000
#define DEF_ELITE_EDC_V2_0                          0x00020109
#define DEF_ELITE_PEL_V2_0                          0x00070001
#define DEF_ELITE_CPG_V1_1                          0x00080001
#define DEF_ELITE_MODEL                             DEF_ELITE_PEL_V2_0

#define DEF_ELITE_DEMO_W_SOFTDEVICE                 0

#if (DEF_ELITE_MODEL == DEF_ELITE_DEV)
#define ELITE_DEVICE_NAME       "Elite-Dev"
#define ELITE_HW_NAME           "Elite-Dev"
#define MAJOR_PRODUCT_NUMBER    0
#define MINOR_PRODUCT_NUMBER    0
#define MAJOR_VERSION_NUMBER    0
#define MINOR_VERSION_NUMBER    0

#define DEF_TW1508_ENABLED      0

#define DEF_LED_COUNT           0
#define DEF_LED_DRV_ENABLED     0
#define DEF_APA102_2020_ENABLED 0

#define DEF_ADC_DRV_ENABLED     0
#define DEF_ADS8691_ENABLED     0
#define DEF_BULTIN_ADC_ENABED   0

#define DEF_DAC_DRV_ENABLED     0
#define DEF_MAX5136_ENABLED     0

#define DEF_SW_DRV_ENABLED      0
#define DEF_MAX14802_ENABLED    0
#define DEF_ADGS1412_ENABLED    0

#define DEF_FS_ENABLED          0
#define DEF_FS_RTT_DIR          0
#define DEF_GD25D10C_ENABLED    0

#define DEF_BTN_ENABLED         0

#define DEF_RTT_JSCOP_ENABLED   0

#elif (DEF_ELITE_MODEL == DEF_ELITE_EDC_V2_0)
#define ELITE_DEVICE_NAME       "Elite-EDC"
#define ELITE_HW_NAME           "Elite-EDCv2.0"
#define MAJOR_PRODUCT_NUMBER    0
#define MINOR_PRODUCT_NUMBER    2
#define MAJOR_VERSION_NUMBER    1
#define MINOR_VERSION_NUMBER    9

#define DEF_TW1508_ENABLED      0

#define DEF_LED_COUNT           12
#define DEF_LED_DRV_ENABLED     1
#define DEF_APA102_2020_ENABLED 1

#define DEF_ADC_DRV_ENABLED     1
#define DEF_ADS8691_ENABLED     1
#define DEF_BULTIN_ADC_ENABED   0

#define DEF_DAC_DRV_ENABLED     1
#define DEF_MAX5136_ENABLED     1

#define DEF_SW_DRV_ENABLED      1
#define DEF_MAX14802_ENABLED    0
#define DEF_ADGS1412_ENABLED    1

#define DEF_FS_ENABLED          0
#define DEF_FS_RTT_DIR          0
#define DEF_GD25D10C_ENABLED    0

#define DEF_BTN_ENABLED         1

#define DEF_RTT_JSCOP_ENABLED   0

#elif (DEF_ELITE_MODEL == DEF_ELITE_PEL_V2_0)
#define ELITE_DEVICE_NAME       "Elite-PEL"
#define ELITE_HW_NAME           "Elite-PELv2.0"
#define MAJOR_PRODUCT_NUMBER    0
#define MINOR_PRODUCT_NUMBER    7
#define MAJOR_VERSION_NUMBER    0
#define MINOR_VERSION_NUMBER    1

#define DEF_TW1508_ENABLED      0

#define DEF_LED_COUNT           0
#define DEF_LED_DRV_ENABLED     0
#define DEF_APA102_2020_ENABLED 0

#define DEF_ADC_DRV_ENABLED     1
#define DEF_ADS8691_ENABLED     0
#define DEF_BULTIN_ADC_ENABED   1

#define DEF_DAC_DRV_ENABLED     0
#define DEF_MAX5136_ENABLED     0

#define DEF_SW_DRV_ENABLED      0
#define DEF_MAX14802_ENABLED    0
#define DEF_ADGS1412_ENABLED    0

#define DEF_FS_ENABLED          0
#define DEF_FS_RTT_DIR          0
#define DEF_GD25D10C_ENABLED    0

#define DEF_BTN_ENABLED         0

#define DEF_RTT_JSCOP_ENABLED   0

#elif (DEF_ELITE_MODEL == DEF_ELITE_CPG_V1_1)
#define ELITE_DEVICE_NAME       "Elite-CPG"
#define ELITE_HW_NAME           "Elite-CPGv1.1"
#define MAJOR_PRODUCT_NUMBER    0
#define MINOR_PRODUCT_NUMBER    8
#define MAJOR_VERSION_NUMBER    0
#define MINOR_VERSION_NUMBER    1

#define DEF_TW1508_ENABLED      1

#define DEF_LED_COUNT           0
#define DEF_LED_DRV_ENABLED     0
#define DEF_APA102_2020_ENABLED 0

#define DEF_ADC_DRV_ENABLED     0
#define DEF_ADS8691_ENABLED     0
#define DEF_BULTIN_ADC_ENABED   0

#define DEF_DAC_DRV_ENABLED     0
#define DEF_MAX5136_ENABLED     0

#define DEF_SW_DRV_ENABLED      1
#define DEF_MAX14802_ENABLED    1
#define DEF_ADGS1412_ENABLED    0

#define DEF_FS_ENABLED          0
#define DEF_FS_RTT_DIR          0
#define DEF_GD25D10C_ENABLED    0

#define DEF_BTN_ENABLED         0

#define DEF_RTT_JSCOP_ENABLED   0

#endif

#define BLE_ELITE_SRV_ENABLED   1
#define BLE_ELITE_OBSERVER_PRIO 3
#define ELITE_UUID              0xFFF0
#define ELITE_COMPANY_CODE      "BPHS"
#define ELITE_HW_VER                                                                           \
    {                                                                                          \
        MAJOR_PRODUCT_NUMBER, MINOR_PRODUCT_NUMBER, MAJOR_VERSION_NUMBER, MINOR_VERSION_NUMBER \
    }

// Maximum number of peripheral links.
#define NRF_SDH_BLE_PERIPHERAL_LINK_COUNT          1
// Maximum number of central links.
#define NRF_SDH_BLE_CENTRAL_LINK_COUNT             0
// Total link count.
#define NRF_SDH_BLE_TOTAL_LINK_COUNT               1

// Enable GATT module.
#define NRF_BLE_GATT_ENABLED                       1
// Priority with which BLE events are dispatched to the GATT module.
#define NRF_BLE_GATT_BLE_OBSERVER_PRIO             1
// Requested BLE GAP data length to be negotiated.
#define NRF_SDH_BLE_GAP_DATA_LENGTH                251
// GAP event length. The time set aside for this connection on every connection interval in 1.25 ms units.
#define NRF_SDH_BLE_GAP_EVENT_LENGTH               (0xFFFF)
// Static maximum MTU size.
#define NRF_SDH_BLE_GATT_MAX_MTU_SIZE              247

// Enable ble device info module
#define BLE_DIS_ENABLED                            1

// DFU
#define NRF_DFU_TRANSPORT_BLE                      1
#define BLE_DFU_BLE_OBSERVER_PRIO                  2
#define NRF_PWR_MGMT_ENABLED                       1

// Enable spim
#define SPI_ENABLED                                1
#define SPI1_ENABLED                               1
#define SPI1_USE_EASY_DMA                          1
#define SPI2_ENABLED                               1
#define SPI2_USE_EASY_DMA                          1
#define SPI_DEFAULT_CONFIG_IRQ_PRIORITY            7
#define NRFX_SPIM_MISO_PULL_CFG                    3

// Enable twi(i2c)
#define TWI_ENABLED                                1
#define TWI0_ENABLED                               1
#define TWI0_USE_EASY_DMA                          1

// Enable gpiote
#define NRFX_GPIOTE_ENABLED                        1
#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY            6

#define COUNT_ARRAY_SIZE(x)                        (sizeof(x) / sizeof(x[0]))
#define COUNTOF(x)                                 (sizeof(x) / sizeof(x[0]))
#define UNCONNECTED_PIN                            0xFFFFFFFF

#define u8_to_u32(a, b, c, d)                      (((uint32_t)(a) << 24) | ((uint32_t)(b) << 16) | ((uint32_t)(c) << 8) | (d))
#define u8_to_u16(a, b)                            (((uint16_t)(a) << 8) | (b))
#define u8_to_i32(a, b, c, d)                      (((int32_t)(a) << 24) | ((int32_t)(b) << 16) | ((int32_t)(c) << 8) | ((int32_t)(d)))
#define u8_to_i16(a, b)                            (((int16_t)(a) << 8) | (int16_t)(b))

#ifdef __cplusplus
}
#endif

#endif /* ! __APP_CONFIG_H__ */